Nitrofurantoin
Nitrofurantoin
Nitrofurantoin
SAMPLE
plasma
REFERENCE
Pons, G.; Rey, E.; Richard, M.O.; Vauzelle, R; Francoual, C; Moran, C; d'Athis, P.; Badoual, J.; Olive,
G. Nitrofurantoin excretion in human milk. Dev.Pharmacol.Ther., 1990, 14, 148152
SAMPLE
Retention time: 6
Internal standard: furazolidone (8)
REFERENCE
Minchin, R.F.; Ho, RC; Boyd, M.R. Reductive metabolism of nitrofurantoin by rat lung and liver in
vitro. Biochem.PharmacoL, 1986, 35, 575-580
SAMPLE
Retention time: 8
Limit of detection: 1 ng/g (eggs); 2 ng/g (tissue)
OTHER SUBSTANCES
Extracted: furaltadone, furazolidone, nitrofurazone
KEY WORDS
protect from light; cow; muscle; dialysis
REFERENCE
Aerts, M.M.; Beek, W.M.; Brinkman, U.A. On-line combination of dialysis and column-switching liquid
chromatography as a fully automated sample preparation technique for biological samples. Determination of nitrofuran residues in edible products. J.Chromatogr., 1990, 500, 453-468
SAMPLE
Matrix: feed, formulations, milk
Sample preparation: Formulations. Dissolve formulation in DMF, filter, inject a 10 |JLL
aliquot. Feeds. Stir 1Og finely ground feeds with 40 mL DMF for 30 min, centrifuge,
filter, wash residues with DMF, dilute to 50 mL with DMF, inject a 10 jxL aliquot. Milk.
Lyophilize 200 mL milk, wash with 75 mL MeCN during 15 min. Extract residue with
15 mL DMF with stirring for 30 min, wash residue with a mixture of 25 mL MeCN+ 5
mL DMF. Combine all organic solutions and evaporate to dryness in vacuum. Treat residue with DMF, filter, dilute to 25 mL with DMF, filter before analysis, inject a 10 |JLL
aliquot.
HPLCVARIABLES
Column: 33 X 4.6 Perkin-Elmer Pecosphere 3x3 CR C18
Mobile phase: MeCNrIOO mM pH 3.2 sodium acetate/acetic acid 10:90
Flow rate: 2
Injection volume: 10
Detector: UV 360
CHROMATOGRAM
REFERENCE
Galeano Diaz, T.; Lopez Martinez, L.; Martinez Galera, M.; Salinas, F. Rapid determination of nitrofurantoin, furazolidone and furaltadone in formulations, feed and milk by high performance liquid chromatography. J.Liq.Chromatogr., 1994, 17, 457-475
SAMPLE
Matrix: formulations
Sample preparation: Dissolve tablet in 10 mM HCl containing 90 mM KCl (pH 2.0), inject
an aliquot.
HPLCVARIABLES
Simultaneous: hydrocortisone
KEY WORDS
tablets
REFERENCE
Neervannan, S.; Dias, L.S.; Southard, M.Z.; Stella, V.J. A convective-diffusion model for dissolution of
two non-interacting drug mixtures from co-compressed slabs under laminar hydrodynamic conditions. Pharm.Res., 1994, 11, 1288-1295
SAMPLE
Matrix: formulations
Sample preparation: 5 mL Suspension + 20 mL water + 50 mL DMF, shake for 10 min,
cool to room temperature, dilute to 100 mL with DMF, centrifuge an aliquot. 4 mL Supernatant + 15 mL 65 [LgImL acetanilide in mobile phase, filter (5 \xm), discard first 2
mL, inject a 15 |xL aliquot.
HPLCVARIABLES
Retention time: 8
Internal standard: acetanilide
KEYWORDS
suspensions
REFERENCE
Juenge, E.C; Kreienbaum, M.A.; Gurka, D.F. Assay of nitrofurantoin oral suspensions contaminated
with 3-(5-nitrofurfurylideneamino)hydantoicacid. J.Pharm.ScL, 1985, 74, 100-102
SAMPLE
Matrix: solutions
Sample preparation: Dissolve in chloroform at a concentration of 1 |xg/mL, inject an
aliquot.
HPLCVARIABLES
Column: 250 X 4 5 jim Lichrospher RP-18
Mobile phase: MeCNrIO mM sodium acetate 20:80, pH 5
Column temperature: 30
Flow rate: 1.6
Injection volume: 20
Detector: UV 365
CHROMATOGRAM
Retention time: 9.8
Limit of detection: 22 ng/mL
OTHER SUBSTANCES
Simultaneous: degradation products, carbadox, furaltadone, furazolidone, nitrofurazone
REFERENCE
Kaniou, L; Zachariadis, G.; Kalligas, G.; Tsoukali, H.; Stratis, J. Separation and determination of carbadox, nitrofurazone, nitrofurantoin, furazolidone, and furaltadone in their mixtures by thin layer
and high performance liquid chromatography J.Liq.Chromatogr., 1994, 17, 1385 1398
SAMPLE
Matrix: tissue
Sample preparation: Homogenize (Tekmar Tissuemizer SDT 1810 with SDT 182 EN
shaft/blades) 5 g finely chopped muscle tissue and 20 mL MeCN at medium speed for 45
s, centrifuge at 1500 g for 5 min, add 15 mL MeCN-saturated hexane, shake for 30 s,
discard the hexane layer, repeat the wash. Add 9 mL EtOH to the MeCN layer and
evaporate under reduced pressure to 2-5 mL at 45, add 2 mL EtOH, evaporate to 2 mL,
add 2 mL EtOH, evaporate to dryness, add 1 mL mobile phase, sonicate for 5 min, centrifuge at 15400 g for 10 min, filter (0.45 fxm) the supernatant, inject a 50 |xL aliquot of
the supernatant.
HPLCVARIABLES
Column: 200 X 4.6 5 |xm ODS Hypersil C18
Mobile phase: MeCN: 1% acetic acid 25:75
Column temperature: 40
Flow rate: 1
Injection volume: 50
Detector: UV 375
CHROIUIATOGRAM
Retention time: 3.5
Limit of detection: 1 ng/g
Limit of quantitation: 5 ng/g
OTHER SUBSTANCES
Extracted: metabolites, furazolidone, nitrofurazone
KEYWORDS
fish; muscle
REFERENCE
Rupp, H.S.; Munns, R.K.; Long, A.R.; Plakas, S.M. Simultaneous determination of nitrofurazone, nitrofurantoin, and furazolidone in channel catfish (Ictalurus punctatus) muscle tissue by liquid chromatography. J.AOAC Int., 1994, 77, 344-350
ANNOTATED BIBLIOGRAPHY
Ebel, S.; Liedtke, R.; Missler, B. [Quantitative determination of nitrofurantoin in body fluids by direct
injection HPLC]. Arch.Pharm.(Weinheim)., 1980, 313, 95-96
Jonen, H.G.; Oesch, R; Platt, K.L. 4-Hydroxylation of nitrofurantoin in the rat. A 3-methylcholanthreneinducible pathway of a relatively nontoxic compound. Drug Metab.Dispos., 1980, 8, 446-451