SIMATIC S7-300/400 Programming Basic
(ST-PRO1) 5 days
Course Contents
Requirements
This course is for SIMATIC S7-300/400 PLC users who are involved with developing or sustaining
automation systems and their application programs. If you are very new to SIEMENS PLC, it is
advisable to start with the Siemens Service Basic (ST-SERV1).
Objectives
This course is the second in a three part series which builds skills with Siemens STEP7 engineering
software in project management, program design and application sustaining. This is an aggressively
paced curriculum covering key programming tools, structures, libraries and editors. This course takes
a systems approach addressing the S7300 / 400 PLCs, plus basic connectivity and functionality of an
HMI, Drive and PROFIBUS based remote I/O.
Throughout this course Participants will build or modify a STEP7 project using proper program
structuring, documentation and test tools. Various instructions, memory types, blocks and functions
will be introduced to provide the participant with solid concepts of structured programming.
The course format consists of instruction and hands-on exercises. The course uses a conveyor model
for demonstrations and exercises.
Topics
Upon completion of this course, the participant shall be able to:
Complete a system hardware configuration.
Build, document, test and troubleshoot a structured STEP7 program.
Program using the multiple address types.
Use symbolic addressing.
Use core application instructions, functions and blocks.
Program using the processed analog values.
Generate data blocks.
Establish connections to an HMI & Drive system.
Course Certificate
Certificate of participation will be awarded after the training.
Contact Information
SIEMENS MALAYSIA SDN. BHD.
Industry Automation & Drive Technologies
Level 1, Reception, CP Tower,
No. 11, Jalan 16/11,
Pusat Dagang Seksyen 16,
46350 Petaling Jaya, Selangor.
Helpdesk:
1800 808 8888
Fax:
+60-3-7955 3720
E-mail:
[email protected]
e-Pass:
siemens.asia/e-pass_v2/ASEAN
SIMATIC S7-300/400 Programming Basic
(ST-PRO1) 5 days
Course Outline
The major topics to be covered are:
SIMATIC S7 System Family
Training Units
SIMATIC Manager
Symbols
Hardware Configuration
Blocks
Binary Operations
Digital Operations
Basics HMI & Drive
Data Blocks
Functions and Function Blocks
Organization Blocks
Analog Values
Troubleshooting
Documentation
Hardware / Software to be used
S7 300 CPU based trainer kit
Siemens Touch Panel
Remote I/O Station
Siemens Digital AC Drive
Process I/O Simulator Panel
Conveyor Model
WinCC Flex Software
Step7 Simatic Manager
SIMATIC S7-300/400 Programming Basic
(ST-PRO1) 5 days
Daywise Schedule
Day 1
Day 3
1. SIMATIC S7 System Family overview
Totally Integrated Automation
S7-200 / 300 / 400 Components
Programming and Commn. Devices
STEP7 Overview
9. Introduction to Profibus DP and HMI
Downloading projects
Establishing communications
Editing tags
Control & monitoring
2. Training Units
Training System Variants
Conveyor Model
Symbols
10. Introduction to Micromaster MM420
Restoring factory default
Basic Commissioning
Control from PLC
3. SIMATIC Manager
Project Structures
Creating a Project
SIMATIC Manager tools
Using the Help and Tutorial files
Using the Menus and Toolbars
Memory Cards
11. Data Blocks
Data types and storage
Data Blocks (DBs)
Arrays and structures
Saving, downloading, monitoring
4. Symbols
Symbolic Addressing
Editor Tools
Importing & Exporting
12. Functions and Function Blocks
Variables
Parameter assignable blocks
Function Blocks (FB)
Block calls
5. Hardware Configuration
CPU Properties and Parameterization
Hardware Configuration
Remote I/O Connections
I/O Addressing
6. Blocks
Program Structures & Execution
Program Blocks
LAD / STL / FBD Editors
Day 2
7. Binary Operations
AND / OR
Contacts
Sets & Resets
Result of Logical Operations (RLO)
Jumps
8. Digital Operations
Data Types - Integer, Real, BCD
Timers & Counters
Accumulators
Data Management & Conversions
Day 4
13. Organization Blocks
OBs
Cold, warm, hot restarts
Interrupts
Error management
14. Analog Value Processing
Analog module addressing
Analog signal conversion
Resolutions and ranges
Scaling values
Day 5
15. Troubleshooting
Debug functions & Error categories
Diagnostic Tools & CPU Messages
Module Information & Monitor Tool
Forcing & Cross References
Find and Filter
16. Documentation
Tools
Program Management
Memory Cards
Project archiving & retrieving
SIMATIC S7-300/400 Programming Basic
(ST-PRO1) 5 days
Time-wise Schedule
Day
Time
Topics
Day 1
09:00 Hrs 09:20 Hrs
09:20 Hrs 10:00 Hrs
10:15 Hrs 12:00 Hrs
13:00 Hrs 15:00 Hrs
15:15 Hrs 17:00 Hrs
SIMATIC S7 System Family overview
Training Units & SIMATIC Manager
Symbols & Hardware Configuration
Step7 Blocks
Practical on the above
Day 2
09:00 Hrs 10:00 Hrs
10:15 Hrs 12:00 Hrs
13:00 Hrs 15:00 Hrs
15:15 Hrs 17:00 Hrs
Binary Operations
Practical on the above
Digital Operations
Practical on the above
Day 3
09:00 Hrs 10:00 Hrs
10:15 Hrs 12:00 Hrs
13:00 Hrs 15:00 Hrs
15:15 Hrs 17:00 Hrs
Introduction to Profibus DP and HMI
Introduction to Micromaster MM420
Data Blocks
Practical on the above
Day 4
09:00 Hrs 10:00 Hrs
10:15 Hrs 12:00 Hrs
13:00 Hrs 15:00 Hrs
15:15 Hrs 17:00 Hrs
Functions and Function Blocks
Organization Blocks
Analog Value Processing
Practical on the above
Day 5
09:00 Hrs 10:00 Hrs
10:15 Hrs 12:00 Hrs
13:00 Hrs 15:00 Hrs
15:15 Hrs 15:30 Hrs
Troubleshooting
Documentation
Practical on the above
Feedback & Valedictory session
Break Timings:
10:00 Hrs 10:15 Hrs
12:00 Hrs 13:00 Hrs
15:00 Hrs 15:15 Hrs
17:00 Hrs 17:15 Hrs
Morning Tea Break
Lunch Break
Afternoon Tea Break
Recess & End of Day
