The first Omega Constellation mid-500 series Certified Chronometer to appear in retail establishments was the

calibre 551 in early 1960. Based on the calibre 550 series developed in 1958, it is said to be part of a family of
the finest production watches ever made. In this article we will explore some of the reasons why that claim is
made with such frequency and conviction.
The iconic status of this series demands depth of coverage, and depth is something of which current
publications are exasperatingly short, particularly for collectors who want to know as much as possible about
the models they collect. Hence this article will be the longest of the series about Omega movements.
Most of the commentary that relates to the engineering and finish of the series will use calibre 551 as the
exemplar for all models based on calibre 550 including calibre 751.

Thanks
As always, I am thankful to numerous correspondents for providing snippets of information to include in the
article. I would like to add a special thanks to Paul Naylor and Jim Hodek for their specialist knowledge and
generosity in sharing it.
As my skills in photography are somewhat under-developed, I have exploited the skills of others, in particular
those of Tim Mackrain, Jim Hodek and Mark Headrick and his site at http://www.abbeyclock.com/index.html.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

The Halcyon Days and the Evolution of the Mid-500 Series

In the 1950s and 1960s, Omega was a progressive and dynamic force in Swiss Watch manufacturing and
made significant contributions to quality improvement through the design of new manufacturing technologies.
The mid-500 series benefited immensely from this eruption of ingenuity, which included such innovations as
the Omegametric, a revolutionary system for measuring the torque of balance-springs. Later becoming an
important tool for all precision manufactures, it was invented in 1962 by Pierre-Luc Gagnebin.
Marc Colombe created the mid-500 series
under the direction of the ageing Henri
Gerber who, throughout his long
association with the Omega Company, had
worked assiduously in continuously
improving Omegas production processes.
Along with improved manufacturing came a
range of innovations and patents, such as
the mobile balance spring stud carrier that
facilitated simple adjustments of beat.
Invented by Jacques Ziegler in 1959, it still
appears in many high-end watches today.
These developments underpin the Omega
philosophy of employing technology and
innovation to improve the performance and
volume of its product. The mid-500 series
was in many ways a successful fusion of
tradition and modernity and the search for
an ideal accommodation between quality
and quantity, which, today, are often at
opposite ends of the scale.
In 1902, Omega was one of the earliest
Swiss manufactures to use the divided
assembly line, thus allowing quality
watches to be mass-produced. Fifty years
on in the 1950s, the company underwent a
massive growth program that involved
takeovers, the development of new
production cycles, major construction
programs and the expansion of its research
and development agenda. A great deal of
ingenuity and capital was invested in
investigating new horological approaches
to old design problems on the one hand,
and, on the other, of further automating
many of non-critical but labour-intensive
functions of the manufacturing process.
Omega clearly demonstrated its cutting
edge manufacturing methods in 1960 when
20 thousand Constellations - completed in
one continuous production run - achieved
chronometer certification with honorary
citations for their accuracy.

Main plate of a calibre 551

F
A
E

The front plate of cal 551 showing the keyless works: visible are A the winding pinion, B
clutch, C intermediate wheel, D mainspring barrel, E setting lever and F set bridge

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

A
Four armed sand-blasted, nicely chamfered and copper plated Glucydur
balance wheel A of the calibre 551. Adjustments of the balance spring were
made by the micrometer swan neck regulator B

Calibre 551 Nivarox balance spring made from an iron, nickel, beryllium,
titanium and silicon alloy. Notice the highly polished tempered alloy pivot.

It was history repeating itself in 1965 when a

straight production run of 100 thousand
chronometres obtained certification with merit
after meeting performance criteria that were
double those of movements that met nonmerit criteria. These performances were the
result of refined manufacturing tolerances
that were hitherto unknown in the large-scale
production of timepieces.
But, the process of creating an Omega was
also high touch in as far as the reliance on
human intervention to complete the quality
cycle through skilled assembly, hand finishing
and expert regulation and adjustment of
movements by Omegas team of regleurs.
Notwithstanding the hype associated with this
family of calibres, the consensus amongst
informed collectors and horologists is that it
has proved over time to be one of, if not the
most robust movement series in the history of
the Omega Company and of production
watchmaking in general.
A record quantity of 5.8 million of the mid-500
series of calibres was produced from 1958 to
1969. In the 1960s, Omega Constellations
had Rolex on the run, and this is seen no
more clearly than in the number of
chronometer movements that were certified
by Bureaux Officiels de Controle de la
Marche des Montres. In 1962, for example,
more than half of all certified chronometers
manufactured in Switzerland bore the Omega
name. Nearly all were powered by mid-500
series calibres.

The essential differences between mid-500 series Constellations and the equally famous Rolex Calibre
1570 were in the balance wheel, hairspring and rotor jewels. The Rolex had a white alloy hairspring with a
Breguet overcoil, whereas Omega used a flat hairspring made from Beryllium alloy that allowed for
adjustments by a micrometer "swan-neck" regulator. The Rolex 1570 rotor bearings were jewelled and the
balance wheel featured timing screws. The Omega rotor bearings were made from a bronze alloy.
In critical functional finish there was little if any difference between these two famous calibres, although
from a cosmetic perspective many believe the calibre 551 has a subtler and more refined finish than the
somewhat over-damascened and colourful Rolex. Omega never gilded the lily in respect to the aesthetics
of a movement and the mid-500 series had an elegance and sophistication to its finish that shames its
graceless and kitschy successors.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

The Base Calibre and Calibre 551

The base calibre for calibre 551 and indeed the model upon which
all mid-500 series calibres were built was calibre 550. The 550 was
a direct replacement for the 490 generation. Anton Kreuzer, Heinz
Hampel and others have said that the early 500 calibres were taken
out of service sooner than anticipated because of click wear in the
winding system. However, if wear had proved to be a major problem
in the short life of the series, a more plausible view would be that
Omega would have produced a fix as soon as possible rather than
compromise its reputation for quality by allowing further production
runs of a problem-plagued winding system.
It is also difficult to place the assertions of Kreuzer and Hampel into
the context and time frames involved in launching a new calibre
series. Omega did not introduce new calibres without clear
commercial and design objectives. Prototype design and testing,
tooling, training, adequate production lead times and logistics for
large scale manufacture of a new calibre would need to be in place
before a major decision was effected to retire a calibre and introduce
a replacement.
A credible alternative to Kreuzer/Hampel view is that the retirement
of the early 500 series was a planned and orderly affair in line with
the Omega tradition of both reflecting, and, at times, leading, market
and technical developments. The trend towards ultra-thin
movements would have been well known to Omegas technical and
marketing doyens. The fact that the early 500 calibres were 5.5 mm
thick and a bit chunky would, arguably, have provided more
incentive to phase in the new slim-line 4.5 mm mid-500 series than
the simpler matter of fixing a winding system in an otherwise
excellent early 500 calibre.
The power reserve of the mid-500 series was improved to 50 hours
with a seven-revolution spring. The old two-arm glucydur balance of
the early 500s series was replaced with a fourarm, nicely chamfered glucydur smooth balance.
The Omega 551 did not need balance screws for
timing since it was fitted with a micrometer
regulator, reflecting another trend of the time in
high-value watches. The removal of the other
screws for poising and temperature was made
possible because of the improved quality of
manufacturing of balances at the time and the use
of temperature-insensitive alloys like glucydur.
This berylliumironcopper alloy is very hard and
is valued for its non-magnetic and anti-corrosive
qualities. It has excellent thermo-elastic properties
(almost zero) that in tandem with the balance
spring allows for a very steady and accurate
output during rises or falls in temperature.

Underside of a calibre 564 balance showing pockmarks where small cores of

metal have been removed to poise the balance. Photo: courtesy Jim Hodek

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

Poising (ensuring equilibrium of the balance) was achieved in

the factory by removing small amounts of metal from the
underside of the rim of the balance. Experience with these
balances had shown that their extreme hardness and stability
under various conditions meant they could be poised in the
factory with the sure knowledge that they would remain poised
over years of use and abuse. By the late 1960s more than
85% of Swiss watches being made featured a smooth balance
that was factory-poised.
In the early 1960s, watchmakers opinions counted for a lot
because of the closer relationships they enjoyed with
customers and the fact that many authorised dealerships were
run by watchmakers who sold a number of competing brands.
Its been recorded that redundant balance screws remained in
quality movements with micrometer regulators simply to
reassure those watchmakers who had come to expect
screwed balances on higher-end watches. But, remember
also, the Constellations main competitor - the calibre 1570
Rolex - had a free sprung balance, and adjustments were
made to its fully functional regulating screws by a microstellar
adjustment tool.
As mentioned, regulating screws are employed to correct a
number of problems that relate to natural conditions and are
also used to adjust the balance poise. Such processes are
labour-intensive and expensive - made the more so in Rolexs
case - because many watchmakers believed that even with
the correct tools the balance wheel should be removed from a
Rolex watch to carry out the adjustments so as to avoid
accidental pivot damage. If those very same watchmakers lamented the absence of balance screws, it was a
simple matter of pointing out both the proven longevity of balance poise in the factory-poised Omegas and the
economies of regulating an Omega compared with the time and expense to the customer of regulating a
Rolex.
In addition to that mentioned already, the decision by Omega to embrace the trend of eliminating balance
screws altogether and place its faith in the easy serviceability of the swan neck regulator may well have been
an attempt to introduce greater product differentiation between itself and Rolex. But, there were risks
associated with the introduction of regulators and nay-sayers had to be neutralised.
In the early 1960s, Omega worked hard to influence hearts and minds in favour of its approach to precision
watchmaking. Concerted efforts to win observatory trials were part of a strategy to demonstrate that
movements with regulators were every bit as good as movements with free sprung balances and timing
screws. Every major triumph that Omega achieved at observatory trials was communicated to its world-wide
network of authorised dealers to ensure the Omega story of quality and precision was well supported.
The same boldness and belief in technology as both a marketing opportunity and a means to improve
serviceability can be seen in the introduction of the co-axial escapement. The Daniels design eliminates sliding
friction in the escapement in favour of radial friction, which, arguably, has extended service intervals to ten
years. Interestingly, in the Co-axial escapement Omega has returned to a free-sprung balance and the use of
regulating screws. Two opposing screws adjust the effective diameter of the balance, and the necessity for
additional screws to adjust poising of the balance has been eliminated in the factory by the use of laser
incisions to the underside of the rim.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

The calibre 550 housed 17 jewels. In

the chronometer calibre 551 a total of
24 jewels was established as the
standard. Six of the seven extra jewels
were fitted to the upper and lower
wheels in the automatic winding
system with the seventh fitted to the
upper ratchet wheel driving gear.
An interesting aspect of the
Excerpt from an Omega parts manual displaying parts that differed from calibre 550
development of a new production
calibre is the extent to which designers
and engineers drew from the experiences of the past, not only in lessons learned, but also in terms of parts
inventories. Few production calibres were ever built from the ground up and the mid-500 calibres are no
exception. As any canny watchmaker will tell you, quite a number of the calibre 551 parts, for example some
wheels, pinions, setting lever and spring, hairspring stud and other parts, were drawn from earlier Omega
calibres, particularly the 470.
Most of the calibre 550 parts are interchangeable with calibre 551 except for the lower rotor bridge and the two
signature parts of a Constellation movement: namely the train wheel bridge that carries the calibre and serial
numbers and the upper rotor bridge that features the stamped jewel count and the Adjusted to five (5)
positions and temperatures script. Many of the parts of other non-chronometer mid-500 series calibres are
also interchangeable with calibres 551, 561 and 564, and this may ensure a ready supply of non-signature
parts well into the future. The parts that may become scarcer are the rotor and drive wheel bridges.
The Winding System

A
B
C
E

Significant improvements to the self-winding system

were made as a result of difficulties experienced with
winding mechanisms of the early 500s. Problems with
click wear were eliminated and the winding system
was sensitive to the slightest movement.
The engineering of the bi-directional winding system
centred on a double reverser wheel, shown as D and
E in the opposite picture. The reverser wheels
featured two small satellite wheels placed in between
D and E. A large and a smaller wheel (B and C)
were placed so as for wheel B to drive the lower
reverser wheel D as well as the smaller wheel C.
(Note that removal of the lower rotor bridge plate to
view the winding configuration has led to the parts not
intermeshing) Wheel C drives the upper reverser
wheel E. A pinion mounted to the axel (arbour) and
positioned underneath D and E drives F.

The important thing to remember is that the above

configuration only created motion in one direction. The combined reverser wheels D and E drive the central
axel, and thus F, when they are rotating in an anti-clockwise direction (dial up position). When they turn in a
clockwise direction they do not drive the central axel. So, at any time, only one of the wheels is actively driving
the winding mechanism.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

The Omega winding system is not all that different from the
Eterna design that ultimately became the most widely used
bi-directional system in the world. Omega combined the two
reverser wheels into one and introduced wheels B and C,
whereas in the Eterna system the rotor drives directly the
upper part of the reversers.
Longines, in the 43X series of movements, also used a
combined reverser wheel assembly similar to Omega.
A feature of the Eterna system was the use of ball-bearings
on the rotor, arguably solving the main issue of the Omega
winding system, which was that of wear over time to the
bronze alloy rotor bearing. It has been the subject of much
speculation as to why Omega did not jewel the rotor or use a
system similar to the Eterna model. To some, this is perhaps
one of the most irritating aspects of the mid-500 series
today, particularly as the rotor design does not allow for
replacement of the bearing assembly alone.
Nevertheless, rotor bearings were a minor consideration at
the time because of the relative ease by which the rotor
could be removed from the movement and the minimal cost
of replacing the assembly. When parts were plentiful, the
cost of a rotor, or rotor bridge and assembly was relatively
cheap.
One particular problem that can develop with automatics
using reverser wheels is wear and/or lubrication gum-up of
the reversers. If the reversers fail to release in their idle
rotational direction then you may well be presented with a
serious problem. The Omega winding reversers are not
unaffected by this issue. On occasions you will see
Constellation reversers completely worn out inside because
of a lack of, or improper, maintenance. The part to repair the
problem is still available, but is not cheap at
around US$50.00.
Its clear, however, that all rotor-mounting
methods have trade-offs. A jewelled mounting is
often proclaimed to be the ideal standard, but is
subject to cracking if the watch is shocked. Ballbearing mountings can also have shock
problems reduced winding efficiency and noise,
and there are other design issues with the
radius of the rotor driving gear. The key to
longevity of any winding system is regular
cleaning and lubrication to ensure it works
smoothly over an extended period of time.
Omega Constellation rotor assemblies will last a
very long time if so serviced.

Dual reverser wheel system of the Longines 430/1/2/3 series.

Photo: courtesy Jim Hodek

B
B2

The two part ratchet wheel used on Omega mid-500 series calibres. The
crown wheel A drives the upper ratchet wheel B (Shown here upside
down with satellite wheel B2 visible) B2 drives the lower ratchet wheel C
(but not the reverse). The click D ensures the lower ratchet wheel only
turns in one direction. The lower ratchet wheel winds the mainspring
and is also driven by the automatic winding mechanism.

Calibre 551 escape wheel and pallet lever showing the jewelled entry and exit pallets

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

The Escapement
The calibre 551 featured a straight-line lever escapement, mirroring a
preference of the Swiss watch industry for the escape wheel, pallets and
balance to be positioned in a straight line. To digress for the benefit of
those who enjoy a little horological history, a Chinese monk, I-Hsing,
constructed the first recorded escapement in AD 725. Called the 'celestial
balance', it was designed to release a regulated flow of water into a vertical
tank. The French engineer Villard de Honnecourt described the first
escapement for a mechanical device in AD 1250, but it wasn't used to
regulate the release of stored energy in a clock. Rather, it was part of a
novel machine that progressively followed the sun as it moved across the
sky.
The pallet lever plays a crucial part in any watch because it is responsible
for accurately discharging the power from the gear train. The calibre 551
pallet lever is made of the highest quality tempered alloy that resists
fluctuations in temperature. It is finished in a smooth utilitarian fashion,
which under the Omega manufacturing ethos is quite befitting of a part that
is not wholly visible. It is a simple and straightforward design, is flat
polished to a black finish and has nicely machined round edges. Most
importantly, the pivot has excellent polish and the pallet jewels are finely
set and aligned. The escape wheel is also of a very hard tempered alloy.
Most major escapement systems have efficiency levels below that of 50%
and the Omega calibre 551 was no exception Couple the loss of power in
the escapement with the considerable loss in the gear train and you can
begin to understand how much compensatory power must reside in the
mainspring.
While the calibre 551 mainspring was thinner because it supported a slowbeat movement, it necessarily had to pack a larger punch of power to
offset the significant losses of energy in the drive train and escapement. A
poor quality watch will quickly burn itself out coping with such forces and
this is one of the reasons why the mid-500 series is held in such high
esteem. The series has now been in service for more than 40 years and
its indeed rare for a well looked-after calibre 551 to have had much more
than the rotor assembly and the third wheel replaced (The third wheel
pivots, in particular, appear to have felt torque stresses more than other
parts of the mid-500 series). In fact, a regularly cleaned and oiled calibre
551 I inherited from my father still retains all of its original parts and keeps
excellent time!
Centre Seconds
To say that the mid-500 series calibres are quirky is extreme, however the
series did have personality traits that, when combined, distinguished it
Series showing the pallet assembly, drive
from other production watches. While not as idiosyncratic as Rolex calibres train through to the balance wheel,
dissembled balance wheel, close-up of
of the time, the series is distinctive in its own right. Mention has already
regulator with incabloc shock proofing
been made of the dual reversers and satellite wheels fulfilling the click
system and dissembled mainspring
function in the automatic winding system, the fitting of a swan neck
regulator and electroplated copper finish on the parts. Besides cosmetic individuality, such as case styles and
pie pan dials, Omega also took its own path in the design of the sweep seconds function.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

The company so favoured the indirect centre seconds option that it almost became a trademark. Even the last
in-house 1000 series automatic movements featured indirect centre seconds. Omega saw a number of
advantages in isolating the seconds gear from the power train - one being that both centre seconds and sub
seconds options were available with little modification to the movement. Indirect centre seconds also
facilitated the placement of the balance wheel close to the rim of the plate, offering better visibility and access.
The picture below of a mid-500 series movement shows how the centre seconds function was configured.

C
A
B

The sweep seconds pinion A (just visible) passes through the centre wheel B. The third wheel C drives the pinion
A. Resting on the pinion A is the sweep seconds friction spring D that stabilises the sweep second hand motion
preventing the jerky action that can occur owing to play between the teeth of the third wheel and those of the
sweep second pinion. Notice the visibility and access of the balance wheel. Photo: courtesy Jim Hodek

The indirect centre seconds function was fully integrated and part of the initial design of the mid-500 series.
Because the third wheel runs above the centre wheel it can drive the sweep seconds pinion without the need
for a transmission wheel. You encounter transmission wheels on many movements of the period. In essence,
the transmission wheel is a simple modification to what is basically a subsidiary seconds movement: an
upgrade to meet the fashion preferences of the time for a centre sweep seconds hand. The Omega calibre
280 is but one of many examples of this mutation of an original sub-seconds design.
Finish and Quality
The robustness and durability of the mid-500 series was evident in its ability to keep excellent time during the
early part of its history, but 40 years later the quality inherent in a well cared-for calibre 551 is reflected more
by its dogged resistance to the forces of friction. This broaches matters of both the superiority of materials
used and the manner in which critical surface areas of the movement were finished, not to mention the original
engineering and design of the calibre.
The quality of materials and degree of functional finish of the parts of a movement determine both how long
the parts last and how effectively they perform. Every part of a movement serves a purpose and every
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

moving part comes into contact with other moving parts. If the constituent materials of the parts are of high
quality, it is the finish of the points of contact between the moving parts that will influence ultimately the
degree of wear and tear. When parts wear away they produce tiny fragments of material that may fall on
other parts and thus a cycle of continuous degeneration begins. In low-value movements with either or both
substandard alloys and poor functional finish the parts must be kept well lubricated, and as soon as the
lubrication fails excessive wear sets in, dramatically reducing the life of the watch.
Functional finish, the art of ensuring the efficient interlocking of the parts and applying highly polished
finishes to minimise friction, is one of the principle benchmarks of a high-value movement and this is where
the mid-500 series of calibres earns it spurs.

Snailing on crown and ratchet wheels. Notice damascening of the plate,

producing a play of light that looks similar to mother of pearl

Omega parts were made of a hard and tough

beryllium-bronze alloy. It was - as Rob Berkavicius
and Paul Delury discovered after having the
material analysed in a metals laboratory in
Adelaide, South Australia - a copper-based alloy
with around 2.25% beryllium, a combination that
responds extremely well to hard tempering. This
tempering method produced an exceptionally
durable material with excellent wearing qualities.
Paul and Robs investigations also revealed that
the rose finish of the movement was pure copper
electroplated on to the surface of the parts. While
no other metal was discovered during the above
testing process, it is reasonable to assume that
minute amounts of another mineral would needed
to make up an alloy that resisted the tarnish and
greening of pure copper. To date, it is not known
which agent was added to the copper, but a good
guess would be beryllium.
Prior to the electroplating process, the base metal
parts underwent a comprehensive albeit mainly
machine finishing regime. No amount of external
coating will obscure bad finishing of base metal
parts and considerable time was devoted in the
production process to ensure both the functional
and cosmetic aspects of finish met Omega
standards.
The more a movement is well maintained, the
better it is to accurately evaluate functional and
cosmetic finish. In having ogled through a highly
magnified variety of mid-500 movements, ranging
from the appallingly neglected to the lovingly
maintained, I believe there is an amazing
consistency of finish in these calibres.

The finishing and decoration of movements played

an important function in earlier, less exact times. At
first, finishing was carried out both to disguise
uneven surfaces and to achieve as flat a plane as possible. Today, machines can achieve what human hands
could not and much of the finish on movements is redundant. The original reason for cosmetic finishing has

Close-up of Arabesque finish on parts of the plate rim creating a strobelike effect under certain light conditions

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

10

been subsumed into a tradition, and indeed an expectation, of finishing as a means of beautifying a
movement. In an ideal world, the best type of finish for the working surfaces of a movement is a black (mirror
finish) polishing that produces completely level planes or surfaces - even the most outstanding damascening
cannot match a black, friction-minimising polish.
In the mid-500 series, prior to the copper amalgam electroplating process, the flat surfaces of the movement
were nicely straight-grained. The non-visible edges were machine rounded, whereas visible flat surfaces were
anglaged to a high polish. Rounding and anglaging are done for both cosmetic and functional reasons. In
terms of function, this type of finishing removes any remaining pieces of metal after the shaping or stamping of
the parts and eliminates the problem of metal detritus interfering with the moving parts. It doesnt take much to
stop a movement and one tiny fragment of metal lodged in a critical place can bring the movement to a
grinding halt.

Close-up of the drive train showing machine produced wheels. The gears are expertly cut . Notice the snailing on the barrel wheel and fine grain flat
surfaces with machine finished rounded edges. The pivots are highly polished. This movement has seen some neglect and keen eyes will notice
rust on the plate near the escape wheel, corrosion on the pallet wheel screw and escape wheel and a dark patch on the balance.

The working surfaces contain an excellent degree of polish. The mainspring barrel cover, the barrel and the
mainspring itself have smoothly polished surfaces to allow the power to disperse evenly. The teeth of the
wheels are nicely formed and the wheels are grained in a circular pattern. The barrel wheel is impressively
snailed, as are the non-visible reversers.
The steel surfaces are usually snailed, as in the barrel ratchet and crown wheels, or black (mirror finish)
polished, as in the screw heads (in visible areas of the movement) or oilstone grey with rounded edges, as in
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

11

the setting lever. All non-anglaged edges are in fact rounded to ensure that no metal fragments pollute the
cased movement. The wheel bridge has an attractive three-finish effect that combines graining, finer graining
on the plane that carries the serial number and a contrasting arabesque finish on the outer rim.
The two outer planes of the rotor are highly polished adding a pleasing contrast to the graining of the inner
rotor. The arabesque finish continues on other parts of the plate rim and strobes in some angles of light. A
damascened mother of pearl effect is created on some surfaces of the bottom plate. Other critical parts of the
movement such as the cannon pinion are well finished adding to the smooth setting of the hands.
An important element contributing to the durability of a movement is the quality of the alloy used in the arbours
and the quality of the polish of the pivots. The mid-500 series arbours are made of a very hard tempered alloy
which meant that a succession of abrasive treatments were needed to polish the pivots to a high degree of
smoothness and eliminate microscopic grooves or roughness. The pivots in the mid-500s series are
excellently finished. Couple this with the low frictional qualities of hard alloy on the sapphire jewel; add a touch
of oil at regular intervals and owners could be assured of many years of uninterrupted wear.
Factory Adjustments
In the 1960s, Omega was one of the most consistent
entrants and indeed winners of Observatory trials in Geneva,
one of the most prestigious contests for precision watches in
the world. Omegas track record in major annual
competitions contributed significantly to the companys
international reputation for both precision and innovation.
While other competitors reserved elite movements for
observatory trials, Omega movements most noticeably were
closely related to their regular production designs. The
company was the worlds largest manufacturer of Bureaux
Officiels de Controle de la Marche des Montres (Known as
BO) certified chronometers from the late 1950s to the late
1960s. Most certified movements found their way into
Constellations, the flagship model of the Omega stable.
In order to obtain competitive advantage and stature as a
Joseph Ory, Omegas Regleur de Prcision in the 1960s
brand, Omega decided upon and promoted vigorously the
practice of only fitting in Constellations certified movements
that had received a commendation for especially good results. In contrast to the Omega initiative, Rolex
and others maintained the custom of fitting the higher graded chronometer movements in their top and
most expensive models. This gave Omega a distinct marketing advantage because customers were
reminded that no matter whether they purchased the cheapest or most expensive Constellation they would
receive the highest grade of movement.
Adjustment is one of the more esoteric and critical parts of the process of bringing a movement to
completion. It is labour intensive and contributes significantly to the expense of production. While Joseph
Ory, Omegas chief movement regulator, or regleur de precision, was tweaking Omega production-related
calibres for the major competitions of the day, a group of master watchmakers undertook the task of
balancing meticulously all critical components and ensuring precise tolerances between interacting parts to
make certain that as a matter of course Omega Constellation movements met the criteria for especially
good results. Movements that did not meet the criteria but still attained certification were used in other
chronometer models of the time, but, as mentioned earlier, Omega had become so consistent in producing
large numbers of movements that exceeded basic chronometer standards that there were few lower-grade
chronometres ever produced.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

12

Adjusting a movement centres mainly on the balance wheel and hairspring. Notwithstanding significant
improvements in materials and design, adjustments for gravity-related error, temperature variance and
isochronic errors are tedious and time-consuming.
The standard that Omega chose to meet was that of adjusting the watch to perform at better than plus or
minus six seconds per day over five prescribed positions and temperatures and over a specified period of
time. This meant painstaking processes such as the removal of minute cones of metal from the balance to
improve poising so as to enhance the rate of timekeeping over the entire slope of the torque curve of the
mainspring.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

13

Deviations in an unadjusted movement in various positions and in various temperatures could be as much, or
more, than 30 seconds a day. The role of the Omega production regleurs (master watchmakers) was to
observe and test for deviations and make the adjustments to meet Omegas criteria of attaining especially
good results from the testing bureaux. Some of the procedures undertaken to improve accuracy included
testing and correcting for trueness, or true-ishness, of the balance (Perfect roundness of the balance and
exact pivot centring): poising to eliminate centre of gravity error; tiny manipulations of the micro regulator to
keep the number of swings of the balance as constant as possible, and a variety of other procedures to ensure
each piece exceeded chronometre standards.
Some of the work in adjustment was automated or at least carried out electronically as the advertisement
overleaf demonstrates. When one discounts the hyperbole, what the advertisement also illustrates is that with
25% of its workforce devoted to quality control, the company recognised the absolute necessity in the 1960s of
ensuring that the Omega Constellation lived up fully to claims of quality and precision made in advertising.
Slow Beat High Dependability
The mid 500 series was a slow-beat
movement with the balance wheel oscillating
at 19,800 half swings an hour, although a socalled true slow-beat is said to oscillate at
18,000 half swings an hour. Its a useful
digression to evaluate the comparative
benefits of slow beat over fast beat
movements. Slow-beat movements, in
general, require less energy (torque) to drive
them and therefore can accommodate softer
and thinner mainsprings.
Having less power under the bonnet - even
after compensating for energy loss through
the drive train and escapement - means a
corresponding reduction in stress and strain,
reducing friction levels through the train to the
escapement. It also allows for less friction on
the winding system. By extension, a quality
watch that endures less friction is likely to
require fewer visits to the workshop for repair
and have far fewer worn parts in need of
replacement. Further, it can be argued that a
quality slow-beat movement will not wear as
much as a fast beat movement if lubrication
failure occurs, as it often does in the
everyday world.
Combine lower friction and less potential
wear - caused by irregular or incorrect
servicing - with a first-rate escapement,
micrometer regulation and a movement that
had a high level of functional finish
(polishing and finishing of intermeshing parts
of the movement where friction and wear occur) and you may begin to understand why the mid-500 series
earned such a spectacular reputation, initially for precision and later for longevity.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

14

Ethos
It worth revisiting a point made earlier about the
Omega Companys manufacturing ethos. The Brandt
legacy was one of creating timepieces to match a
vision of aesthetic and technological excellence, and
the Omega Constellation was, as has often been
stated, a high-value watch. While the last of the
family line of actively managing Brandts passed away
in the late 1950s, their manufacturing raison detre
was very much in the forefront of the organisations
corporate memory in the 1950s and 1960s. It was a
legacy that gave prominence to time-honoured
values of quality, tradition and artistry: not to forget
more than a measure of horological hauteur that
was informed by some of the more self-serving myths
and legends of Swiss watchmaking.
If we take the Swiss perspective in reviewing the
halcyon days of the mid-500 series, Omega, with a
history of more than fifty years of mass-produced
timepieces, had not embraced the Americanisation of
automation that began with Fordism and over time
legitimised built-in obsolescence and planned
dilapidation as a primary means of fuelling the
madness we now call consumerism. In Omegas
case, mass production was leveraged to tighten
tolerances, improve efficiency and to produce
quantity, which, in turn, meant growth and profit, but
not at the expense of quality and durability. In fact,
Omega mechanised numerous processes knowing
that the resulting exactitude would enhance quality.
In the 1960s the company was also yet to confront
the jewel free, pin-lever disposable watch of the
1970s, which, through successful marketing
campaigns that altered price/value perceptions, went
on to capture more than fifty percent of the US
market by the middle of that decade. The Japanese
were yet to swamp many of Omegas traditional
markets with their sturdy, somewhat ugly and vastly
cheaper mechanical movements in Seikos and
Orients. And, while electronic watches like Bulova added competitive pressure and prompted Omega to follow
suit in some models, the quartz explosion was still some years away and didnt overtake mechanical watches
in numbers produced until 1978. The Swiss would say that Omega was forced by overwhelming
circumstances to entertain notions of manufacturing to a price as opposed to a standard in the 1970s, and it is
pleasing to see that today it seems to be moving closer to its origins.
And so, the mid-500 series can be seen as one of the highest forms of the evolution of the production
movement before price got in the way. The DNA of the mid 500-series is traceable to traits and attitudes much
closer to haute horlogerie than the quality-compromised, cost driven assembly lines of the 1970s. The series is
a true work of art and function, produced in an era that witnessed the pinnacle of the production watch - a
combination that so inspires todays horological petrol-heads.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

15

The Calibres
551
As calibre 551 has been used as an example throughout this survey of the mid-500 series, there is no need to
repeat information mentioned earlier.
Calibre 551 was the only non-date calibre to power mid 500 series Omega Constellations. A total of
approximately 37,000 pieces were produced, making this a rarer model than the later date models: let no-one
try to convince you otherwise. Any watch without date of this period purporting to be an Omega Constellation
that has a calibre 550 or 552 movement
under the dial is incorrect.

561
While modelled on the calibre 551, the base
calibre for the 561 is calibre 560. New parts
were added to the base calibre to build a
date function into the series. A new plate
was required to accommodate the date
mechanism and other re-designed parts.
The calibre 561 does not feature a quickset
date function, mirroring the state of
technology at the time. Omegas main
competitor, the Rolex calibre 1570, also did
not have quickset date. The date can be set
either by winding the watch forward or
backwards to nine or ten oclock and then
forwards to twelve - a feature of nonquickset date models designed to facilitate
more rapid calendar changing. I believe,
however, that collectors should not do this
too regularly, as on some occasions it can
mark uncannily the time at which the
calendar function fails.
The calendar mechanism works by
connecting the hour wheel A to a wheel with
twelve teeth B. On the same axel as B is a
wheel C (not visible in picture) with eight
teeth. This wheel drives the fourty-eight
tooth date indicator driving wheel D that
rotates once in every 24 hours. The driving
pin E engages the teeth of the date indicator
F at approximately 2200 hours and
completes the change at midnight.

D
A
F
B
E

Further modifications were made to the date

indicator driving wheel D that eliminated the
Photographs courtesy of Tim Mackrain
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

16

double safety cam mounted on the pipe of D. A lighter wheel replaced the old wheel and, coupled with a
strongly sprung date jumper, it prevented displacement of F when the movement was severely shocked.
Calibre 561 was released in late 1959 and the first model to feature the new calendar Constellation was the
Grand Luxe model OT 16963. The easily observed signature parts of the movement are the train bridge that
bears the calibre number and the rotor bridge. You may also notice the stamping of OXG just below the rotor
bridge on the rim of the movement. The location of OXG varied in different production runs and it denotes the
Omega House Code. House codes were stamped on most imports to America. OXG was the Omega
ebauche code and, in the case of Omega, the manufacture that produced the movement under its own name.

Top: Parts list showing the variations of the base calibre 560 to calibre 551. Below: Parts list for a Constellation calibre 561 showing
variations and commonalities to both the 560 and 551.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

17

Calibre 562
It is reasonable to state from the viewpoint of informed collecting that the 561 was the first and premier calibre
for the early calendar mid-500 series Constellations. Being the first means that, from the standpoint of
collecting this series of Constellations, it is an important movement to have in ones collection. Premier, from a
collecting viewpoint, can be interpreted to mean first amongst others.
The reason why it is useful in exploring issues such as the first of a model and the most desirable models to
collect becomes clear when you are confronted with claims about other calibres being legitimately connected
to the Constellation marque. For example, in the paper records held by Omega Museum there is a notation
that some calibre 562s were adjusted to meet chronometre certification, were issued with certificates and
powered early calendar Constellations. These notations may or may not be accurate, but the real question is,
why would you want to have a calibre 562 when most lines of reason would point you to calibre 561 as being
the definitive model of the early calendars?
While I think its premature to say with certainty that the records are either correct or incorrect, I have never
seen a calibre 562 that met fully the specifications for a Constellation there has always been something
missing and I think it is commonsense to leave the collecting of 562s to those who have great affection for
Seamasters and Devilles.

Rings-ins and Impostors

Screen
capture of ainpage
Omega Museum
document
Nomenclature
des calibres Omega showing that some Constellations were powered by calibre
You will
encounter
yourin the
cyber-travels
and
visits to
bricks and
mortar establishments a range of movements
562s underlined. Translation of en partie avec bull. (Constellation) literally means that some pieces were issued with a chronometer certificate (bulletin) and were
other than properly marked calibre 561s powering early
Constellation
used in
Constellations calendar models.

As you may have concluded, the interchangeability of the early 56X calibre parts is both a godsend and a
nightmare for collectors. While one should not be fussed about a competent watchmaker purloining minor
parts from other early 56X calendar models to repair a genuine calibre 561, you should be less than happy to
discover a Doktor Frankenwatch taking a non-chronometer movement; finding a Constellation dial; sourcing
signature Constellation parts, such as rotor and drive train bridges, dauphine hands and correct crowns;
removing the old drive and rotor bridges from the donor movement and popping on the signature bridges. This
can be seen as both opportunistic and deceptive. Apart from exploiting novice collectors, it corrupts market
supply to have yet another Frankenwatch doing the rounds.
Fortunately, more than half a million true calibre 561s were produced. So, why consider a early calendar
Constellation that is not to specifications, that does not have crisp case lines, that does not have correct
hands, that doesnt feature a correct original dial and dial markings and does not have a correct crown? There
are plenty of calibre 561s that do, and all you need is patience and somewhat deep pockets. Further, there are
calibre 561s that have their original, aged and authentic papers - such as receipts, owners manuals and
chronometer certificates that have matching serial numbers. I recently purchased a solid 18k gold calibre 561,
C-shaped bracelet model with authentic papers and was surprised at how little by the way of premium I had to
pay.
Apologists on eBay and other discussion forums suggest that there is really not much variance in the early
56X calibres and suggest that the only difference in Constellations was that the balance and balance spring
were manually regulated before gaining a chronometer certificate. They often explain that, after fifty years,
numerous parts have probably been replaced and there is little contrast between a genuine 561 and an
impostor. What they fail to mention in their self-serving apologies for, and snake oil defences of, all sorts of
shonky listings is that only chronometer movements that received certificates declaring especially good
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

18

results (criteria roughly double of that of basic certification) were fitted to Omega Constellations. Further, they
fail to mention that many Omega Constellation calibre 561s owned by careful and appreciative owners who
regularly serviced their watches survive today without having had many, if any, parts replaced. In their
ignorance, they also fail to acknowledge the fundamental tenets of collecting, that of valuing the rarity,
originality and historical integrity of a watch.
The differences are much greater than the apologists suggest and, from a collecting standpoint, to own a
nicely preserved calibre 561 with genuine papers is an aspiration that is both worthy and attainable. Further, if
papers arent available on a well-preserved and authentic Constellation, you can, for a fee of 60 Swiss Francs,
receive from Omega a certificate that provides details of its authenticity and the original shipping destination of
the watch. Such certificates support the provenance of authentic Constellations, and will preserve and, in time,
enhance, the value of your investment.

564
The base calibre for the calibre 564 Constellation is
the 17-jewel calibre 563. The additional 7 jewels of
the calibre 564 are devoted to the winding system as
they were in the 551. There are few differences
between the 563 and 564 and both feature the
quickset date function.

Front plate of a calibre 564. Note the upgraded date indicator driving
wheel. The configuration for normal driving of the date mechanism is the
same as calibre 561. Photo: courtesy Tim Mackrain.

Position 1. Locked

Apart from some modifications to the plate and a

new date indicator guard, a handful of new parts
largely for the winding assembly and quickset
function were designed for the new quickset date
base calibre. Most of the parts for the base calibre
came from earlier models, mainly 550, 551 and 560,
however some important parts were sourced from
even earlier calibres, mirroring a custom at Omega
of not reinventing the wheel, so to speak.
The date change function on the calibre 564 isnt
rocket science. Instead of rotating the crown to
advance the date, a pull-push motion allows the date
to be advanced day by day. There are three
positions of the crown, and as the crown is pulled out
from the lock position 1 to its farthest point at
position 3 it engages a spring that impels the date
lever to engage the teeth of the date, advancing the
date by one day. The process is repeated until the
correct date appears. To set the hands, position two
of the crown is selected and the crown is rotated
until the correct time appears.

The quickset design is reasonably robust, but

somewhat bothersome. Many believe that the date
setting system in 1000 series Constellations that
Quickset function with the crown in the lock position 1. Note date
allows date selection by rotation of the crown is more
corrector pin position A. Photo: courtesy Jim Hodek
durable and more efficient. There can be wear
problems associated with the calibre 564 quickset configuration, the breaking off of the spiral (see B overleaf)
on the date corrector being the main problem in earlier 564s, however in later calibre 564s the part was
redesigned to eliminate the spiral in favour of a more solid part. One is able to tell when modifications of this
type occurred because of the figure 1 placed within the Omega symbol on the drive train bridge.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

19

The picture opposite shows the action of changing

the calendar. The date corrector is attached to the set
lever by a rod C that can just be seen in the picture
opposite. (See the previous picture for a better view
of the rod). When the crown is pulled out to position
3 the set lever starts the date changing action by
causing A to move towards its locking position and B
to nudge the date wheel tooth down one notch, thus
advancing the date from 3 to 4.

A
C
Position 3

Close-up showing the crown in position 3. Notice how the pulling out of
the crown has pushed the date corrector pin into a lock position at A
and the date corrector spiral B has completed its function. Photo:
courtesy Jim Hodek

D
B
C

The date jumper D and jumper spring C in the lower

picture work in tandem with the correcting
mechanism to ensure that the date is set exactly in
position and that only one day is advanced at a time.
The second picture shows the reverse of the date
indicator dial guard. This part connects the date
indicator wheel to the rest of the movement and
provides attachment for the date corrector (spiral part
at B and pin at A) and the date jumper D and spring
C.
Constellations powered by calibre 564 started
reaching the shops in the first half of 1966: the CShaped and 35mm round models being the earliest
cases to house the movement. Also housing calibre
564 was the new monocoque (one shell) series that
featured the some of last of the pie pan dials along
with more contemporary flat dials.
Some collectors nominate the calibre 564
Constellation as the true owner of the title of Best
Production Movement Ever Produced, possibly
placing too much weight on the quick set
modification.

Date indicator guard showing A the date corrector pin hole, B the date
corrector spiral B, C jumper spring and D date jumper. Photo courtesy
Tim Mackrain

If we follow the modification logic, we must then

consider the 751, which has exactly the same DNA
as the 561 and 564 but with the added mutation of a
day function. True, there were improvements on the
561, for example, the modified date indicator driving
wheel, but there were also modifications of the 564
such as the remodelling of the date corrector part.

We are thus confronted with the question of which version of the calibre 564 is the definitive Best Ever? But,
dont debates of this kind entrap the parties involved in endless spirals of argument that lead nowhere? Is it not
wiser and much more conducive to ones blood pressure to view the mid-500 series of calibres as members of
the same family: as siblings born at reasonable intervals? Not to put too serious a slant on it, this can allow
mid-500 series devotees to find a level of furious agreement that allows them to conserve their energies in
readiness for the inevitable onslaught from the 30T crowd, which will mount an argument based on
indestructibility while dancing around important questions of design, technological development and function!

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

20

Impostors and Ring-Ins

Calibre 564 chronometer certified movements
also powered a small number of Seamasters,
such as the example opposite, and the
Seamaster movements are indistinguishable
from the Constellation movements. They bear
the same rotor bridge and train bridge markings
and some have very similar cases to some
calibre 712 models.
On occasions you may encounter a Seamaster
case housing a calibre 564 with a faux
Constellation dial. This is sheer madness
because of the comparative rarity of some
Seamaster chronometers released in particular
case numbers. Arguably calibre 564 Seamaster
chronometers in good condition should be of a
comparable value to their Constellation cousins
because relative numbers were small.
Calibre 564 Chronometre Seamaster. Photo: courtesy Jacques Phedonos

The most common Franken quickset

Constellations you will encounter are those powered by a calibre 565 non-certified movement or the 17-jewel
calibre 563, - with or without the rotor and train bridges swapped - that originally powered a number of
Seamaster DeVilles. One way in which to tell whether a Doktor Frankenwatch has been playing swapsies are
colour variations between the bridges and the rest of the movement. One has to be careful in declaring a
Frankenwatch too soon because some colour variations are caused by bodgy servicing methods, particularly
the use of wrong or exhausted cleaning solutions that either strip the copper electroplating off the parts, tarnish
them or effect variable colour changes to some parts. As far as I am able to state with certainty, the only
quickset 56X calibre to be fitted into Constellations was calibre 564.

751
The long and lamentably neglected calibre 751 is, as
mentioned earlier, a sibling of the earlier mid-500
series calibres. The 24-jewel calibre 751 had a
commercial life of about nine years until the Swiss
watch crisis began to really bite in the mid-seventies.
The base calibre for the 751 is the 17-jewel calibre
563. The rotor bridge and the lower bridge for the
rotor were sourced from calibre 551. A new plate
was necessary to build the day/date function and a
complimentary date indicator guard was designed to
fit. The 563 date indicator was flattened to fit the
new configuration, but basically the date mechanism
and the quickset function are identical to the last
modified calibre 563/564 models.
A new day dial with star assembly was designed to
attach to a day star driving wheel that was
connected to the centre wheel assembly. The
normal mid-500 series centre seconds design was

Calibre 751 Day/Date movement. Photo: courtesy Tim Mackrain

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

21

used and advancing the day function is very

much like how we should now advance the old
calibre 561 non-quickset date in as much as
advancing the time 24 hours in order to change
the day.
The 751 was the last of the great production
movements manufactured by Omega. Apart
from being the power source for Constellations
from 1966 to 1975, it also filled the elegantly
designed gold case, milled from a block of solid
18k gold, of the famous BA168.023 Golden
Seamaster. Rarer than any Constellation series
ever produced, only approximately 1000
examples of the Golden Seamaster were ever
built.
Today, some of the more discerning collectors
are recognising the value of the calibre 751 and
its direct lineage to the celebrated calibre 551.
The 751 is every bit as good as the earlier
calibres and represents the youngest child of the
famous family. Far from embodying the
precociousness of the baby of the family, every
thing that can be said about the earlier mid-500
calibres can be said about the 751.
The 751 was also the first calibre to power
integrated bracelet models. In the mid 1960s,
Omega initially resisted the demands from its
dealers to produce integrated bracelet watches,
but in 1969 it relented and produced the
eminently collectible model ST 368.0845. Over
the past twelve months there has been some
movement in the price of this and other calibre
751 models as some of the aversion to this
calibre evaporates in direct proportion to the
significant rises in price for earlier mid-500
calibres.

Date indicator and guard with day dial featuring longer date jumper and spring

Comparison date indicators. Right: indicator for 564. On the right are the 751 and
564 hour wheel assemblies. Note the pinion for the star wheel on the left and the
longer finger assembly

Full assembled day/date configuration: Photo courtesy Tim Mackrain

Calibre 752
As with the calibre 562, there is an ongoing debate about whether calibre 752 powered some Omega
Constellations. The Omega database indicates that calibre 752 powered the integrated bracelet Constellation
models 166.0252 and ST 366.0857. However, the Omega Museum document, Nomenclature des calibres
Omega, does not list the 752 as having been fitted into Constellations. There may be several explanations for
this disparity.
The above models were produced after 1975 when the Swiss meltdown was in full swing. They were produced
during the changeover to the 1000 series calibres and they may have only been produced for the Japanese
market. I have seen three examples of Constellations housing calibre 752s all of which were originally
located in Japan. While a sample of three coming from one country is not large enough to state with certainty
that some 752 non-chronometre grade movements found their way under the Constellation livery, further
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

22

research into the 366.0857 confirms that non-chronometer calibre 752 movements were indeed released
under this case number. A separate essay on the 0857 appears on this site.

In Finality
As mentioned initially, to my knowledge there
are no publications available that attempt
systematically to provide an in-depth survey of
evidence that supports conventional wisdom
that the mid-500 family of calibres were the
best production movements Omega ever
produced and, arguably, the best production
movements ever produced by a Swiss watch
company. What I have sought to do in this
article is present some breadth and, with any
luck, a bit of depth to the history and
engineering of these magnificent calibres.
Hopefully it adds in some way to the collective
body of knowledge on the series.
The first thing that this examination has
established is that Omega Constellation
calibres were high value movements. But
were they of higher value than their
contemporaries?

Calibre 752 Constellation non- COSC. Case numbers 166.0252/ 366.0857

with genuine dial. Purchased in Japan in 1978

In reviewing the construction, design, materials,

finish, precision and ongoing durability of these
calibres, there is no doubt in my mind that the
mid-500 series is exceptional for a production
watch. There is also no doubt in my mind that,
when comparing apples with apples and
exploring the evolution of Omega calibres, both
in terms of functionality and durability, that the
mid-500 series is the best that Omega ever
produced.

Whether or not they were the best production calibre ever built can only be tested over and over on the
watchmakers bench and turned over and over in the expert horologists mind. Perhaps, in the history books
some of the more recent production watches will ultimately claim that title? Who knows? Certainly, they were
first amongst equals when one considers their main competitors of the time. But, the fact that a broad base of
collectors, watchmakers, dealers and horological sages consider them the best is good enough for me.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

23

Glossary of Terms
The following terms used in this article are listed alphabetically:
ANGLAGE: The machine or hand angling of plate and bridge edges. Is both cosmetic and functional as it removes sharp edges that
may sustain some damage during service, remain as detritus in the movement and potentially affect the mechanics of the
movement.
ARABESQUE: The embossed parallel lines around parts of the rim of a number of Omega calibres that often creates a strobing
visual effect when seen in particular angles of light. The style of decoration has now been used in the latest Omega in-house calibre
with some fanfare and erroneous claims of it being a new feature of Omega manufacturing.
ARBOUR: The axle or shaft on which a wheel or pinion is mounted.
BALANCE: The mechanism that controls the speed of the to and fro oscillations of the balance wheel. Consisting of a number of
parts, the major of which are the balance staff, the balance wheel and the balance spring.
BALANCE SCREW: One of a number of small screws inserted horizontally in the rim of a compensated balance. Adjusting these
selectively can correct the poise of the balance, the rate (timing) of the movement and may help to correct position errors
BALANCE-SPRING: An alternative name for the hairspring.
BARREL: A mainspring barrel that drives the train directly.
BEAT: The tick of a watch, produced as a pallet comes into contact with the escape-wheel.
BRIDGE: A block screwed to the top plate of a movement, with a hole in it (often jewelled) to support one end of the arbour.
Bureaux Officiels de Controle de la Marche des Montres. Known as BOs. Independent and authorised testing laboratories that
undertook the task of evaluating and awarding the chronometer appellation to large volume consignments of movements.
Observatories only tested chronometers in specific competitions. In 1973, the bureaux in five watchmaking cantons (Bern, Geneva,
Neuchtel, Solothurn and Vaud) as well as the Fdration de l'industrie Horlogre sSuisse were amalgamated into a new centralised
testing body called COSC or Contrle Officiel Suisse des Chronometres.
CALIBRE: The physical make-up of a watch movement that distinguishes it from others: a description of the personality of a watch.
A watch can be described as being of large, small, deep, slim etc. calibre.
CANNON PINION A pinion that is a friction-fit on the arbour of the centre wheel and has a tubular extension (the shape of which
gives rise to the name) passing through the central hole in the dial, on which the minute-hand is fitted.
CENTRE WHEEL: The second wheel of the train, driven (by means of a pinion which shares its arbour) from the great wheel. The
arbour forms the spindle around which the hands revolve.
CLICK: A spring-loaded pawl or tongue used in conjunction with a wheel with angled teeth (in which the click engages) so that the
wheel can be turned one way only.
COCK: The shaped bracket which supports the bottom bearing of the balance-wheel and to some extent protects the wheel itself.
CROWN: The milled knob on the pendant of a stem-wound watch, turned by the fingers to wind the watch and (usually) to set the
hands; for the latter purpose it is pulled out or occasionally pushed in.
DAMASCENING: A method of decorating the bottom plate or bridges, consisting of a radial or striped design that appears to
shimmer as it catches the light at different angles;
ESCAPEMENT: The metering unit which, working in conjunction with the balance or other controller, breaks down the motive force
of the mainspring into controlled and regular steps by alternately delivering impulse to the balance and locking the train. Its main
components are the escape-wheel and the pallets.
ESCAPE-WHEEL The final (usually fifth) wheel of the train, bearing especially shaped teeth that interact with the pallets.
FLAT POLISHING: The polishing operation creates a mirror surface on parts of a watch. Also called black polishing.
Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

24

FREE-SPRUNG: Having no regulator attached. Such a watch or chronometer relies on the balance-screws for any adjustment that
may be necessary. It is assumed that the movement will have been built and adjusted to a very high standard of accuracy from the
start, so that such adjustment is only occasionally needed.
FRONT PLATE: The plate nearer to the dial.
HACKING: A watch with a small lever under the dial which thrusts a wire hook between the teeth of the escape wheel or fourth
wheel thus stopping the movement.
HOROLOGY: The science of time measurement, from Greek hora point in time and logos word, speech, process of reasoning
INCABLOC: Shock-absorber system to help prevent damage from shocks to the balance pivots. Its spring system assures an elastic
play of both jewels of the balance wheel, thus allowing compensating movements of the balance staff pivots when the watch is
shocked through dropping or other trauma. Without a shock absorbent system, the constant shocks to the case could cause bending
and eventually breaking of inner components.
ISOCHRONOUS: A balance is isochronous if the duration of the oscillations is the same whether the arcs are long or short. Factors
that prevent this state of isochronism include the escapement, the play of the balance spring between the curb pins and faulty
poising of the balance wheel and its spring.
LEVER ESCAPEMENT The standard escapement for Swiss watches from about 1890. The lever is a pivoted bar to which is
attached an arm carrying two pallets, which alternately engage with the teeth of the escape-wheel The other end of the lever is
forked and engages with the impulse-pin which is mounted on a steel disc (the roller) centred on the balance-staff.
LUBRICANT: Used to reduce the level of friction caused by the intermeshing of one watch part with another. Special low-density oils
are used in the pivots turning inside jewels, the sliding areas between levers and the spring inside the barrel, as well as numerous
other parts of a movement.
MAINSPRING: The coiled spring of tempered steel which provides the power source for all watches
MOVEMENT The correct name for the works of a watch.
OVERCOIL: A method of improving the isochronous characteristics of a hairspring by bending its outermost coil inwards and
upwards so that it ends and is anchored well within the circumference of the spring. Breguet invented it and it is often called after
him
PALLET: Mounted on the end of a pallet lever designed to engage with the escape-wheel for the purpose of either receiving impulse
or performing the locking function. There are usually two pallets, one for each operation. See Lever Escapement.
PERLAGE: Also known as circular graining, perlage is a surface decoration comprising of an even pattern of partially overlapping
swirls applied with a quickly rotating material that has a very fine abrasive quality.
PINION: A small wheel mounted on the same arbour as a larger one and generally used to transmit the drive between that wheel
and another. Pinions are usually of steel and have six or eight leaves, as their teeth are called.
PIVOT: The narrow tip of an arbour, rotating in a jewel especially hollowed to receive it or a hole pierced in one of the plates The
steel used for arbours is quite brittle and pivots often break, especially at the outer end of the balance-staff.
PLATE: A panel of metal pierced with a number of holes to receive the pivots of a watch's moving parts. Most watches feature the
modern layout of only one plate behind the dial.
POISE: Achieving a state of balance of the balance. Although no balance is perfectly poised and perfectly stable, the smooth
Glucydur balance of the Omega mid-500 series, where the balance is posed in the factory, comes quite close and will remain so for
many years in a regularly serviced watch.
PRODUCTION MOVEMENT: The term is used in this article to denote a movement in which automated processes play a large part
in its production. While the Omega production process was streamlined and automated, at many junctures of the manufacture of a
movement human hands intervened and either guided the machining or applied their specialist craft.
POSITION ERROR: Variation in a watch's rate when it is held or suspended in different positions. Omega mid-500 series calibres
were tested and adjusted in different positions, and recorded on the rotor bridge is the notation Adjusted 5 positions.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

25

REGULATOR: A device for altering the effective length of a balance-spring by sliding the curb-pins, which lightly restrain it close to
its outer end, back and forth along its length.
RATE: The degree to which a movement deviates from strict accuracy when timed over a specific period. The watch has a has a
good rate is professional jargon for The watch keeps good time, but can also a mean a statement of verified fact when stated as
The watch tests with a high stability of rate.
SNAILING: Variations of a decorative spiral pattern used on the barrel wheel, barrel ratchet wheel and crown wheel of Omegas.
Snailing looks like a series of slightly curved lines radiating from the wheel centre.
STRAIGHT-LINE LEVER: The 20th-century style of the lever escapement the arbours of the balance, lever and escape-wheel all
line up in a row.
SWEEP SECOND HAND: A second hand that is centrally mounted so that it sweeps the entire surface of the dial.
THIRD WHEEL: The train wheel between the centre wheel and the fourth wheel.
TRAIN: The sequence of wheels and pinions that transmits the drive from the barrel to the escape wheel. It normally consists of the
great wheel, centre wheel, third wheel, fourth wheel and escape-wheel. Each of these carries a pinion to receive the drive from the
preceding component.

Desmond Guilfoyle. Diagrams and photographs not owned by the author retain the copyright of their owners

26