Scribd
Upload
549 views2 pages

Electrical Safety Awareness Test

This document appears to be a training evaluation for an electrical safety training program. It consists of 20 multiple choice questions testing knowledge on various electrical safety topics, including: the purpose of electrical grounding; how fuses and circuit breakers function to protect against overcurrent and short circuits; the importance of disconnecting power before rescuing electrical shock victims; limits for human body current tolerance; when electrical shock is most likely; appropriate fire extinguishers for electrical fires; licensing requirements for electrical work; health effects of electrical contact; responsibilities for safety; personal protective equipment; definitions of RCCB and types of radiation from arc flashes; how grounding reduces risk of shock; and voltage ranges. The evaluation covers a wide range of essential

Uploaded by

AshwinSiddaramaiah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
549 views2 pages

Electrical Safety Awareness Test

This document appears to be a training evaluation for an electrical safety training program. It consists of 20 multiple choice questions testing knowledge on various electrical safety topics, including: the purpose of electrical grounding; how fuses and circuit breakers function to protect against overcurrent and short circuits; the importance of disconnecting power before rescuing electrical shock victims; limits for human body current tolerance; when electrical shock is most likely; appropriate fire extinguishers for electrical fires; licensing requirements for electrical work; health effects of electrical contact; responsibilities for safety; personal protective equipment; definitions of RCCB and types of radiation from arc flashes; how grounding reduces risk of shock; and voltage ranges. The evaluation covers a wide range of essential

Uploaded by

AshwinSiddaramaiah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

ELECTRICAL SAFETY TRAINING PROGRAM

TRAINING EVALUATION
(Please tick or circle the correct answer)

1. The third pin on a plug should never be removed since its purpose is
to provide path for leakage
current to flow to earth pit through earth conductor:
a) True
b) False
2. Fuses and circuit breakers are intended to protect the equipment
against over current & short
circuit fault conditions:
a) True
b) False
3. Before attempting to rescue a victim of electrical shock, make sure
that the power has been
disconnected and all wires are dead, (not live):
a) True
b) False
4. Human body fuse limit is________:
a) 30 mA
b) 100 mA
c) 300 mA
5. When are you most likely to receive an electrical shock?
a) When insulators come between electricity and you
b) When Leakage electric current flows in your body
c) When using insulated good condition tools
6. Burns from an electrical arc cause damage from:
a) From Inside out
b) From Outside in
c) Just on the surface of the skin only
7. Fault current will flow through:
a) The path of least resistance
b) All paths of resistance
c) Properly sized conductors
8. Always use an ELCB device in high risk areas such as wet locations or
construction sites:
a) True
b) False
9. Metal body of every equipment and motors should be doubly earthed:
a) True
b) False
10. The severity of electric shock is more if the leakage current flows
through:
a) Hand to hand - through Heart
b) Hand to right leg / feet
c) Feet to feet
Please turn the page over for remaining questions

11. For Electrical Fires (Panels, equipment etc),which fire extinguisher is


to be used?
a) Water Type Extinguisher
b) CO2 Extinguisher
c) No extinguisher to be used
d) Foam Extinguisher
12. Wireman License /Supervisor License is not required to work on
Electrical Installations if the
person working has more than 15 years experience.
a) True
b) False
13. Contact with electricity can cause:
a) Death
b) Burns
c) Muscle contractions
d) All/Any of the above
14. Safety is the responsibility of
a) Factory Manager
b) Occupier
c) Safety Officer
d) Everyone at the plant
15. Personal Protective Equipment is meant for
a) Protecting workers
b) Protecting machineries
c) Protecting managers
d) Protecting environment
16. What is the expansion of RCCB?
a) Radiology coding certification Board.
b) Residual current circuit breaker.
c) Residual compact circuit breaker.
d) Regional Current Cutting breaker
17. Which of the following will result in lowest resistance & greater risk
of injury during Elec. shock?
a)
b)
c)
d)

Dirty skin
Dry skin
Wet skin
Thin skin

18. Arc flash blast produces ----------------- Radiation?


a)
b)
c)
d)

Gamma radiation
X-ray
UV radiation
Nuclear

19. Grounding/Earthing reduces the Risk of?


a)
b)
c)
d)

Shock
Trip
Fall
Low Voltage

20. The medium Voltage Range is?


a) 250v and below
b) 300v to 650 v
c) 650v to 33 kv

Please check if you have entered your Name & details & return this sheet to Trainer.

You might also like