Scribd
Upload
47 views

Introduction To Microcontrollers

Microcontrollers were originally developed from microprocessors for use in embedded electronic control systems. They include a processor and most or all of the memory, clock, and other systems needed to support it. Microcontrollers integrate as many functions as possible onto a single chip, including memory, and are designed for low power and low cost. Microcontrollers control the system they are embedded in through inputs and outputs, and unlike microprocessors, small microcontrollers are unlikely to use an operating system and instead run software directly on the hardware.

Uploaded by

jlva_lkpb
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Introduction To Microcontrollers

Microcontrollers were originally developed from microprocessors for use in embedded electronic control systems. They include a processor and most or all of the memory, clock, and other systems needed to support it. Microcontrollers integrate as many functions as possible onto a single chip, including memory, and are designed for low power and low cost. Microcontrollers control the system they are embedded in through inputs and outputs, and unlike microprocessors, small microcontrollers are unlikely to use an operating system and instead run software directly on the hardware.

Uploaded by

jlva_lkpb
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Microcontrollers

Dr. Jos Luis Vzquez vila


Facultad de Ingeniera
UNACAR 2016

CONTENTS
Embedded Electronic Systems and

Microcontrollers.
Embedded Systems.
Larger Systems
Application-specific integrated circuits (ASICs)
Field-programmable gate arrays (FPGAs)

Microcontrollers

Embedded Electronic Systems and


Microcontrollers
Microcontrollers were originally developed from

microprocessors for use in embedded electronic


control systems.
They include a processor and most or all of the memory,
clock, and other systems needed to support it.
Everything is inside a single package, which is why a
microcontroller is often described as a computer on a
chip.

What (and Where) Are Embedded Systems?


Suppose that you asked people in the developed world to show you the

products in their house that contained computer chips. (Admittedly, this


term is deliberately vague.)
Probably they would point to a personal computer and stop there.
game console, personal digital assistant, cellular phones, photographs,
playing games, washing machines, video recorders, etcetera.
modern cars have approaching 100 processors and even a personal
computer has embedded processors in its keyboard, mouse, screen, disk
drives, and so on.
These products contain embedded electronic systems: The processor supports
the operation of the product but is not the main reason for purchasing it.
There are said to be about 100 embedded processors for each computer.

Embedded systems encompass a broad range of

computational power. A crude classification is given by the


number of bits that can be manipulated at a time.
Many processors perform very simple tasks, for which 8 or
even 4 bits are sufficient.
These may be comparable in power with the processors used
in the first personal computers and, in fact, the descendents
of the microprocessors of those days are still widely used.

Embedded Systems
Electronic dice built using (top) JK flip-flops and

gates and (bottom) an eight-pin microcontroller.

Larger Systems
Application-specific integrated circuits (ASICs):

Specially designed for a particular application as their name


implies. They provide the best performance but are
extremely expensive to design and test.

Field-programmable gate arrays (FPGAs) and

programmable logic devices (PLDs):


Essentially an array of gates and flip-flops, which can be connected

by programming the device to produce the desired function.


This is specified using a hardware description language such as
VHDL or Verilog.
Older programmable logic devices, such as the 22V10, contain a set
of flip-flops (ten in this case) whose inputs come from an array of
AND and OR gates. They are often used to provide the glue logic
needed to support a large processor.
Field-programmable gate arrays have a more versatile structure and
may be enormous, with over a billion (109) transistors.

FPGAs Structure
Logic Block a relatively small circuit
block that is replicated in an array in an
FPD. When a
circuit is implemented in an FPD, it is first
decomposed into smaller sub-circuits that
can each
be mapped into a logic block.

Microcontrollers:
These have nearly fixed hardware built around a central processing

unit (CPU).
The CPU controls a range of peripherals, which may provide both
digital and analog functions such as timers and analog-to-digital
converters.
Small devices usually include both volatile and nonvolatile memory
on the chip but larger processors may need separate memory.
Their operation is usually programmed using a language such as C
or C++.

Microcontrollers
Integrate as many functions as possible on to the same chip as

the processor. This gave rise to the microcontroller (MCU or


C), which typically contains all of the functions needed to
make a complete computer system, including memory.
They are designed for low power and low cost.
Given that the role of a microcontroller is to control the
system in which it is embedded, its inputs and outputs are
clearly important

Microcontrollers
Another distinction between microprocessors and

microcontrollers is the operating system.


It is very unlikely that a modern microprocessor would be used
without an operating system such as linux, MacOS, orWindows.
In contrast, small microcontrollers are unlikely to use an
operating system at all: Software is written to run directly
on the hardware without any additional support.
When an operating system is used, it is very different from that
on a desktop computer. This is because microcontrollers are
often used in real-time systems, where they are required to
respond to external events within a prescribed time.
A specialized real-time operating system (RTOS) is used in
such applications.

Microcontrollers
When you turn on a desktop computer, you have to wait for the

operating system to load before you can do anything.


In contrast, a microcontroller starts up with the users program,
whose first job is to start the RTOS, configure it, and launch the
desired tasks.
A more obvious difference is that an RTOS may occupy only a
few hundred bytes of memory, not megabytes.

You might also like