2G Call Drop Counters

Call Drop Measurement per Cell(CALL.Drop.
CELL)
Page 1 of 316
Call Drop Measurement per Cell(CALL.Drop.CELL)

Overview
Call Drop Measurement per Cell is used to measure the call drops based on the cause of the call drop, the channel type, the service
type, and the call mode when a call drop occurs.
Measurement Counters
ID
Counter
Description
Original
Release
1278072417 CELL.CALL.DROPS.ERR.IND.T200.EXP.SD
M3000A:Call
Drops due to ERR
IND Received on
SDCCH in Stable
State (T200
Expired)
Earlier
than
V900R011
1278072418 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.SD
M3000B:Call
Drops due to ERR
IND Received on
SDCCH in Stable
State (Unsolicited
DM Response)
Earlier
than
V900R011
1278072419 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SD
M3000C:Call
Drops due to ERR
IND Received on
SDCCH in Stable
State (Sequence
Error)
Earlier
than
V900R011
1278072420 CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHF.SIG
M3400A:Call
Drops due to ERR
IND Received on
TCHF (Signaling
Channel) in Stable
State (T200
Expired)
Earlier
than
V900R011
1278072421 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHF.SIG
M3400B:Call
Drops due to ERR
IND Received on
TCHF (Signaling
Channel) in Stable
State (Unsolicited
DM Response)
Earlier
than
V900R011
1278072422 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHF.SIG
M3400C:Call
Drops due to ERR
IND Received on
TCHF (Signaling
Channel) in Stable
State (Sequence
Error)
Earlier
than
V900R011
1278072423 CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHH.SIG
M3500A:Call
Drops due to ERR
IND Received on
TCHH (Signaling
Channel) in Stable
State (T200
Expired)
Earlier
than
V900R011
1278072424 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHH.SIG
M3500B:Call
Drops due to ERR
IND Received on
TCHH (Signaling
Channel) in Stable
State (Unsolicited
DM Response)
Earlier
than
V900R011
1278072425 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHH.SIG
M3500C:Call
Drops due to ERR
IND Received on
Earlier
than
V900R011
file:///C:/Users/eluxybc/AppData/Local/Temp/~hh4551.htm
20/11/2015
Page 2 of 316
TCHH (Signaling
Channel) in Stable
State (Sequence
Error)
1278072426 CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHF.TRAF
M3100A:Call
Drops due to ERR
IND Received on
TCHF (Traffic
Channel) in Stable
State (T200
Expired)
Earlier
than
V900R011
1278072427 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHF.TRAF
M3100B:Call
Drops due to ERR
IND Received on
TCHF (Traffic
Channel) in Stable
State (Unsolicited
DM Response)
Earlier
than
V900R011
1278072428 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHF.TRAF
M3100C:Call
Drops due to ERR
IND Received on
TCHF (Traffic
Channel) in Stable
State (Sequence
Error)
Earlier
than
V900R011
1278072429 CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHH.TRAF
M3200A:Call
Drops due to ERR
IND Received on
TCHH (Traffic
Channel) in Stable
State (T200
Expired)
Earlier
than
V900R011
1278072430 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHH.TRAF
M3200B:Call
Drops due to ERR
IND Received on
TCHH (Traffic
Channel) in Stable
State (Unsolicited
DM Response)
Earlier
than
V900R011
1278072431 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHH.TRAF
M3200C:Call
Drops due to ERR
IND Received on
TCHH (Traffic
Channel) in Stable
State (Sequence
Error)
Earlier
than
V900R011
1278072432 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SD
M3001A:Call
Drops due to
CONN FAIL
Received on
SDCCH in Stable
State (Radio Link
Failure)
Earlier
than
V900R011
1278072433 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SD
M3001B:Call
Drops due to
CONN FAIL
Received on
SDCCH in Stable
State (HO Access
Failure)
Earlier
than
V900R011
1278072434 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SD
M3001C:Call
Drops due to
CONN FAIL
Received on
SDCCH in Stable
State (OM
Intervention)
Earlier
than
V900R011
20/11/2015
Page 3 of 316
1278072435 CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.SD
M3001D:Call
Drops due to
CONN FAIL
Received on
SDCCH in Stable
State (Radio
Resource
Unavailable)
Earlier
than
V900R011
1278072436 CELL.CALL.DROPS.CONN.FAIL.OTHER.SD
M3001E:Call
Drops due to
CONN FAIL
Received on
SDCCH in Stable
State (Other
Causes)
Earlier
than
V900R011
1278072437 CELL.CALL.DROPS.CONN.FAIL.RL.TCHF.SIG
Earlier
M3401A:Call
than
Drops due to
V900R011
CONN FAIL
Received on TCHF
(Signaling
Channel) in Stable
State (Radio Link
Failure)
1278072438 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHF.SIG
M3401B:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Signaling
Channel) in Stable
State (HO Access
Failure)
1278072439 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHF.SIG
M3401C:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Signaling
Channel) in Stable
State (OM
Intervention)
1278072440 CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TCHF.SIG
M3401D:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Signaling
Channel) in Stable
State (Radio
Resource
Unavailable)
1278072441 CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHF.SIG
M3401E:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Signaling
Channel) in Stable
State (Other
Causes)
1278072442 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHH.SIG
M3501A:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHH
(Signaling
Channel) in Stable
State (Radio Link
Failure)
1278072443 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHH.SIG
M3501B:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHH
20/11/2015
Page 4 of 316
(Signaling
Channel) in Stable
State (HO Access
Failure)
1278072444 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHH.SIG
M3501C:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHH
(Signaling
Channel) in Stable
State (OM
Intervention)
1278072445 CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.TCHH.SIG
Earlier
M3501D:Call
than
Drops due to
V900R011
CONN FAIL
Received on TCHH
(Signaling
Channel) in Stable
State (Radio
Resource
Unavailable)
1278072446 CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHH.SIG
M3501E:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHH
(Signaling
Channel) in Stable
State (Other
Causes)
1278072447 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHF.TRAF
Earlier
M3101A:Call
than
Drops due to
V900R011
CONN FAIL
Received on TCHF
(Traffic Channel)
in Stable State
(Radio Link
Failure)
1278072448 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHF.TRAF
M3101B:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Traffic Channel)
in Stable State (HO
Access Failure)
1278072449 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHF.TRAF
M3101C:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Traffic Channel)
in Stable State (OM
Intervention)
1278072450 CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TCHF.TRAF
M3101D:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Traffic Channel)
in Stable State
(Radio Resource
Unavailable)
1278072451 CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHF.TRAF
M3101E:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHF
(Traffic Channel)
in Stable State
(Other Causes)
1278072452 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHH.TRAF
M3201A:Call
Drops due to
Earlier
than
20/11/2015
Page 5 of 316
CONN FAIL
V900R011
Received on TCHH
(Traffic Channel)
in Stable State
(Radio Link
Failure)
1278072453 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHH.TRAF
Earlier
M3201B:Call
than
Drops due to
V900R011
CONN FAIL
Received on TCHH
(Traffic Channel)
in Stable State (HO
Access Failure)
1278072454 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHH.TRAF
Earlier
M3201C:Call
than
Drops due to
V900R011
CONN FAIL
Received on TCHH
(Traffic Channel)
in Stable State (OM
Intervention)
1278072455 CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.TCHH.TRAF
M3201D:Call
Earlier
Drops due to
than
CONN FAIL
V900R011
Received on TCHH
(Traffic Channel)
in Stable State
(Radio Resource
Unavailable)
1278072456 CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHH.TRAF
Earlier
M3201E:Call
than
Drops due to
V900R011
CONN FAIL
Received on TCHH
(Traffic Channel)
in Stable State
(Other Causes)
1278072457 CELL.CALL.DROPS.REL.IND.SD
M3002:Call Drops
due to REL IND
Received on
SDCCH
1278072458 CELL.CALL.DROPS.REL.IND.TCHF.SIG
M3402:Call Drops Earlier

due to REL IND
than
Received on TCHF V900R011
(Signaling
Channel)
1278072459 CELL.CALL.DROPS.REL.IND.TCHF.TRAF

due to REL IND
than
Received on TCHF V900R011
(Traffic Channel)
1278072460 CELL.CALL.DROPS.REL.IND.TCHH.SIG

due to REL IND
than
Received on TCHH V900R011
(Signaling
Channel)
1278072461 CELL.CALL.DROPS.REL.IND.TCHH.TRAF

due to REL IND
than
Received on TCHH V900R011
(Traffic Channel)
1278072462 CELL.CALL.DROPS.NO.MR.SD
M302:Call Drops
Due to No MR
from MS for a
Long Time
(SDCCH)
1278072463 CELL.CALL.DROPS.NO.MR.TCHF.SIG
M342:Call Drops
Earlier
Due to No MR
than
from MS for a
V900R011
Long Time (TCHF)
(Signaling
Earlier
than
V900R011
Earlier
than
V900R011
20/11/2015
Page 6 of 316
Channel)
1278072464 CELL.CALL.DROPS.NO.MR.TCHF.TRAF
M312:Call Drops
Earlier
Due to No MR
than
from MS for a
V900R011
Long Time (TCHF)
(Traffic Channel)
1278072465 CELL.CALL.DROPS.NO.MR.TCHH.SIG
M352:Call Drops
Earlier
Due to No MR
than
from MS for a
V900R011
Long Time
(TCHH) (Signaling
Channel)
1278072466 CELL.CALL.DROPS.NO.MR.TCHH.TRAF
M322:Call Drops
Due to No MR
from MS for a
Long Time
(TCHH) (Traffic
Channel)
Earlier
than
V900R011
1278072467 CELL.CALL.DROPS.ABIS.LNK.FAIL.SD
M303:Call Drops
due to Abis
Terrestrial Link
Failure (SDCCH)
Earlier
than
V900R011
1278072468 CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHF.SIG
M343:Call Drops
due to Abis
Terrestrial Link
Failure (TCHF)
(Signaling
Channel)
Earlier
than
V900R011
1278072469 CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHF.TRAF
M313:Call Drops
due to Abis
Terrestrial Link
Failure (TCHF)
(Traffic Channel)
Earlier
than
V900R011
1278072470 CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHH.SIG
M353:Call Drops
due to Abis
Terrestrial Link
Failure (TCHH)
(Signaling
Channel)
Earlier
than
V900R011
1278072471 CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHH.TRAF
M323:Call Drops
due to Abis
Terrestrial Link
Failure (TCHH)
(Traffic Channel)
Earlier
than
V900R011
1278072472 CELL.CALL.DROPS.EQUIP.FAIL.SD
M304:Call Drops
Due to Equipment
Failure (SDCCH)
Earlier
than
V900R011
1278072473 CELL.CALL.DROPS.EQUIP.FAIL.TCHF.SIG
M344:Call Drops
due to Equipment
Failure (TCHF)
(Signaling
Channel)
Earlier
than
V900R011
1278072474 CELL.CALL.DROPS.EQUIP.FAIL.TCHF.TRAF
M314:Call Drops
due to Equipment
Failure (TCHF)
(Traffic Channel)
Earlier
than
V900R011
1278072475 CELL.CALL.DROPS.EQUIP.FAIL.TCHH.SIG
M354:Call Drops
due to Equipment
Failure (TCHH)
(Signaling
Channel)
Earlier
than
V900R011
1278072476 CELL.CALL.DROPS.EQUIP.FAIL.TCHH.TRAF
M324:Call Drops
due to Equipment
Failure (TCHH)
(Traffic Channel)
Earlier
than
V900R011
20/11/2015
Page 7 of 316
1278072477 CELL.CALL.DROPS.FORCE.HO.SD
M305:Call Drops
due to Forced
Handover
(SDCCH)
Earlier
than
V900R011
1278072478 CELL.CALL.DROPS.FORCE.HO.TCHF.SIG
M345:Call Drops
due to Forced
Handover (TCHF)
(Signaling
Channel)
Earlier
than
V900R011
1278072479 CELL.CALL.DROPS.FORCE.HO.TCHF.TRAF
M315:Call Drops
due to Forced
Handover (TCHF)
(Traffic Channel)
Earlier
than
V900R011
1278072480 CELL.CALL.DROPS.FORCE.HO.TCHH.SIG
M355:Call Drops
due to Forced
Handover (TCHH)
(Signaling
Channel)
Earlier
than
V900R011
1278072481 CELL.CALL.DROPS.FORCE.HO.TCHH.TRAF
M325:Call Drops
due to Forced
Handover (TCHH)
(Traffic Channel)
Earlier
than
V900R011
1278072487 CELL.CALL.DROPS.AFTER.CONN.TCHF.TRAF
M317:Call Drops
after Answer
(TCHF) (Traffic
Channel)
Earlier
than
V900R011
1278072488 CELL.CALL.DROPS.AFTER.CONN.TCHH.TRAF
M327:Call Drops
after Answer
(TCHH) (Traffic
Channel)
Earlier
than
V900R011
1278072489 CELL.CONN.TCHF.TRAF
M318:Successful
Connections
(TCHF) (Traffic
Channel)
Earlier
than
V900R011
1278072490 CELL.CONN.TCHH.TRAF
M328:Successful
Connections
(TCHH) (Traffic
Channel)
Earlier
than
V900R011
1278072491 CELL.A.CLR.REQ.SD
M309:Clear
Requests Sent on
the A Interface
(SDCCH)
Earlier
than
V900R011
1278072492 CELL.A.CLR.REQ.TCHF.SIG
M349:Clear
Requests Sent on
the A Interface
(TCHF) (Signaling
Channel)
Earlier
than
V900R011
1278072493 CELL.A.CLR.REQ.TCHH.SIG
M359:Clear
Earlier
Requests Sent on
than
the A Interface
V900R011
(TCHH) (Signaling
Channel)
1278072494 CELL.A.CLR.REQ.TCHF.TRAF.STATIC
M319A:Clear
Requests Sent on
the A Interface
(TCHF) (Traffic
Channel) (Stable
State)
Earlier
than
V900R011
1278072495 CELL.A.CLR.REQ.TCHF.TRAF.HO
M319B:Clear
Requests Sent on
the A Interface in
Handover State
(TCHF) (Traffic
Channel)
Earlier
than
V900R011
1278072496 CELL.A.CLR.REQ.TCHH.TRAF.STATIC
M329A:Clear
Earlier
20/11/2015
Page 8 of 316
Requests Sent on
the A Interface in
Stable State
(TCHH) (Traffic
Channel)
than
V900R011
1278072497 CELL.A.CLR.REQ.TCHH.TRAF.HO
M329B:Clear
Requests Sent on
the A Interface in
Handover State
(TCHH) (Traffic
Channel)
Earlier
than
V900R011
1278072498 CELL.TRAF.CH.CALL.DROPS
CM33:Call Drops
on Traffic Channel
Earlier
than
V900R011
1278072499 CELL.SIG.STATIC.STATE.CALL.DROPS
CM360:Call Drops Earlier

on Radio Interface than
V900R011
in Stable State
(Signaling
Channel)
1278072500 CELL.SIG.HO.STATE.CALL.DROPS

in Handover State V900R011
(Signaling
Channel)
1278072501 CELL.SIG.CALL.DROPS
CM36:Call Drops
on Signaling
Channel
1278072502 CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE

in Stable State
V900R011
(Traffic Channel)
1278072503 CELL.TRAF.CH.CALL.DROPS.HO.FAIL

in Handover State V900R011
(Traffic Channel)
1278072504 CELL.SIG.STATIC.STATE.CALL.DROPS.ERR.IND
CM3600:Call
Earlier
Drops on Signaling than
Channel in Stable
V900R011
State (Error
Indication)
1278072505 CELL.SIG.STATIC.STATE.CALL.DROPS.CONN.FAIL
Earlier
CM3601:Call
V900R011
Channel in Stable
State (Connection
Failure)
1278072506 CELL.SIG.STATIC.STATE.CALL.DROPS.REL.IND
CM3602:Call
Earlier
Channel in Stable
V900R011
State (Release
Indication)
1278072507 CELL.SIG.UM.CALL.DROPS
CM36C:Call Drops Earlier

(Signaling
V900R011
Channel)
1278072508 CELL.SIG.CALL.DROPS.NO.MR

Due to No MR
than
from MS for a
V900R011
Long Time
(Signaling Channe)
1278072509 CELL.SIG.CALL.DROPS.ABIS.LNK.FAIL

Due to Abis
than
Terrestrial Link
V900R011
Failure (Signaling
Channel)
1278072510 CELL.SIG.CALL.DROPS.EQUIP.FAIL
Earlier
than
V900R011
20/11/2015
Page 9 of 316
due to Equipment
Failure (Signaling
Channel)
than
V900R011
1278072511 CELL.SIG.CALL.DROPS.FORCE.HO

due to Forced
than
Handover
V900R011
(Signaling
Channel)
1278072512 CELL.TRAF.CH.UM.CALL.DROPS
CM33C:Call Drops Earlier

(Traffic Channel)
V900R011
1278072513 CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.CONN.FAIL
CM3301:Call
Drops on Traffic
Channel in Stable
State (Connection
Failure)
Earlier
than
V900R011
1278072514 CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.ERR.IND
CM3300:Call
Drops on Traffic
Channel in Stable
State (Error
Indication)
Earlier
than
V900R011
1278072515 CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.REL.IND
CM3302:Call
Drops on Traffic
Channel in Stable
State (Release
Indication)
Earlier
than
V900R011
1278072516 CELL.TRAF.CH.CALL.DROPS.NO.MR

Due to No MR
than
from MS for a
V900R011
Long Time (Traffic
Channel)
1278072517 CELL.TRAF.CH.CALL.DROPS.ABIS.LNK.FAIL

due to Abis
than
Terrestrial Link
V900R011
Failure (Traffic
Channel)
1278072518 CELL.TRAF.CH.CALL.DROPS.EQUIP.FAIL

due to Equipment
than
Failure (Traffic
V900R011
Channel)
1278072519 CELL.TRAF.CH.CALL.DROPS.FORCE.HO

than
due to Forced
Handover (Traffic V900R011
Channel)
1278072520 CELL.SD.CALL.DROPS
CM30:Call Drops
on SDCCH
1278072521 CELL.SD.UM.CALL.DROPS
CM30A:Call Drops Earlier

(SDCCH)
V900R011
1278072523 CELL.CALL.DROPS.AFTER.CONN

after Answer
than
V900R011
1278072524 CELL.CONN
CM338:Successful
Connections
Earlier
than
V900R011
1278072525 CELL.A.CLR.REQ.TCH.SIG
CM369:Clear
Requests Sent on
the A interface
(TCH) (Signaling
Channel)
Earlier
than
V900R011
1278072526 CELL.A.CLR.REQ.TCH.TRAF.STATIC
CM339A:Clear
Earlier
Requests Sent on A than
interface in Stable V900R011
Earlier
than
V900R011
20/11/2015
Page 10 of 316
State (TCH)
(Traffic Channel)
1278072527 CELL.A.CLR.REQ.TCH.TRAF.HO
CM339B:Clear
Requests Sent on
the A interface in
Handover State
(TCH) (Traffic
Channel)
Earlier
than
V900R011
1278072528 CELL.A.CLR.REQ.TCH.TRAF
CM339:Clear
Requests Sent on
the A interface
(TCH) (Traffic
Channel)
Earlier
than
V900R011
1278072529 CELL.A.CLR.REQ.TALIMIT
CM339C:Clear
Earlier
Requests Sent on
than
the A interface (TA V900R011
Limit)
1278072531 CELL.CALL.DROPS.ERR.IND.T200.EXP.SIG.ULCELL
M3610A:Call
Earlier
Drops Due to the
than
ERR IND Received V900R011
from the Signaling
Channel on the
TRX in the
Underlaid Subcell
in Stable State
(T200 Expired)
1278072532 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.SIG.ULCELL
Earlier
M3610B:Call
than
Drops Due to the
from the Signaling
Channel on the
TRX in the
Underlaid Subcell
in Stable State
(Unsolicited DM
Response)
1278072533 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SIG.ULCELL
M3610C:Call
Earlier
Drops Due to the
than
from the Signaling
Channel on the
TRX in the
Underlaid Subcell
in Stable State
(Sequence Error)
1278072534 CELL.CALL.DROPS.ERR.IND.T200.EXP.TRAF.ULCELL
M3310A:Call
Earlier
Drops Due to the
than
from the Traffic
Channel on the
TRX in the
Underlaid Subcell
in Stable State
(T200 Expired)
1278072535 CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TRAF.ULCELL
M3310B:Call
Earlier
Drops Due to the
than
from the Traffic
Channel on the
TRX in the
Underlaid Subcell
in Stable State
(Unsolicited DM
Response)
1278072536 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TRAF.ULCELL
M3310C:Call
Earlier
Drops Due to the
than
from the Traffic
20/11/2015
Page 11 of 316
Channel on the
TRX in the
Underlaid Subcell
in Stable State
(Sequence Error)
1278072537 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SIG.ULCELL
M3611A:Call
Drops Due to the
CONN FAIL
Received from the
Signaling Channel
on the TRX in the
Underlaid Subcell
in Stable State
(Radio Link
Failure)
1278072538 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SIG.ULCELL
Earlier
M3611B:Call
than
Drops Due to the
V900R011
CONN FAIL
Received from the
Signaling Channel
on the TRX in the
Underlaid Subcell
in Stable State (HO
Access Failure)
1278072539 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SIG.ULCELL
M3611C:Call
Earlier
Drops Due to the
than
CONN FAIL
V900R011
Received from the
Signaling Channel
on the TRX in the
Underlaid Subcell
in Stable State (OM
Intervention)
1278072540 CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.SIG.ULCELL
M3611D:Call
Drops Due to the
CONN FAIL
Received from the
Signaling Channel
on the TRX in the
Underlaid Subcell
in Stable State
(Radio Resource
Not Available)
Earlier
than
V900R011
1278072541 CELL.CALL.DROPS.CONN.FAIL.OTHER.SIG.ULCELL
M3611E:Call
Drops Due to the
CONN FAIL
Received from the
Signaling Channel
on the TRX in the
Underlaid Subcell
in Stable State
(Others)
Earlier
than
V900R011
1278072542 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TRAF.ULCELL
M3311A:Call
Drops Due to the
CONN FAIL
Received from the
Traffic Channel on
the TRX in the
Underlaid Subcell
in Stable State
(Radio Link
Failure)
Earlier
than
V900R011
1278072543 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TRAF.ULCELL
M3311B:Call
Drops Due to the
CONN FAIL
Received from the
Traffic Channel on
the TRX in the
Underlaid Subcell
Earlier
than
V900R011
Earlier
than
V900R011
20/11/2015
Page 12 of 316
in Stable State (HO

Access Failure)
1278072544 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TRAF.ULCELL
M3311C:Call
Earlier
Drops Due to the
than
CONN FAIL
V900R011
Received from the
Traffic Channel on
the TRX in the
Underlaid Subcell
in Stable State (OM
Intervention)
1278072545 CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TRAF.ULCELL
M3311D:Call
Drops Due to the
CONN FAIL
Received from the
Traffic Channel on
the TRX in the
Underlaid Subcell
in Stable State
(Radio Resource
Not Available)
Earlier
than
V900R011
1278072546 CELL.CALL.DROPS.CONN.FAIL.OTHER.TRAF.ULCELL
M3311E:Call
Drops Due to the
CONN FAIL
Received from the
Traffic Channel on
the TRX in the
Underlaid Subcell
in Stable State
(Others)
Earlier
than
V900R011
1278072547 CELL.CALL.DROPS.REL.IND.SIG.ULCELL
Earlier
M3612A:Call
than
Drops Due to the
REL IND Received V900R011
from the Signaling
Channel on the
TRX in the
Underlaid Subcell
in Stable State
1278072548 CELL.CALL.DROPS.REL.IND.TRAF.ULCELL
M3312B:Call
Earlier
Drops Due to the
than
from the Traffic
Channel on the
TRX in the
Underlaid Subcell
in Stable State
1278072549 CELL.CALL.DROPS.NO.MR.SIG.ULCELL
M3613A:Call
Drops Due to No
MR from the MS
on the Signaling
Channel on the
TRX in the
Underlaid Subcell
Earlier
than
V900R011
1278072550 CELL.CALL.DROPS.NO.MR.TRAF.ULCELL
M3313B:Call
Drops Due to No
MR from the MS
on the Traffic
Channel on the
TRX in the
Underlaid Subcell
Earlier
than
V900R011
1278072551 CELL.CALL.DROPS.ABIS.LNK.FAIL.SIG.ULCELL
Earlier
M3613C:Call
Drops Due to Abis than
V900R011
Terrestrial Link
Failure on the TRX
in the Underlaid
Subcell (Signaling
Channel)
1278072552 CELL.CALL.DROPS.ABIS.LNK.FAIL.TRAF.ULCELL
M3313D:Call
Earlier
20/11/2015
Page 13 of 316

Terrestrial Link
V900R011
Failure on the TRX
in the Underlaid
Subcell (Traffic
Channel)
1278072553 CELL.CALL.DROPS.EQUIP.FAIL.SIG.ULCELL
M3613E:Call
Drops Due to TRX
Failure in the
Underlaid Subcell
(Signaling
Channel)
Earlier
than
V900R011
1278072554 CELL.CALL.DROPS.EQUIP.FAIL.TRAF.ULCELL
M3313F:Call
Drops Due to TRX
Failure in the
Underlaid Subcell
(Traffic Channel)
Earlier
than
V900R011
1278072555 CELL.CALL.DROPS.FORCE.HO.SIG.ULCELL
M3614A:Call
Drops Due to
Forced Handover
on the TRX in the
Underlaid Subcell
(Signaling
Channel)
Earlier
than
V900R011
1278072556 CELL.CALL.DROPS.FORCE.HO.TRAF.ULCELL
M3314B:Call
Drops Due to
Forced Handover
on the TRX in the
Underlaid Subcell
(Traffic Channel)
Earlier
than
V900R011
1278072557 CELL.CALL.DROPS.RES.CHECK.SIG.ULCELL
M3614C:Call
Earlier
Drops Due to
than
Resource Check on V900R011
the TRX in the
Underlaid Subcell
(Signaling
Channel)
1278072558 CELL.CALL.DROPS.RES.CHECK.TRAF.ULCELL
M3314D:Call
Earlier
Drops Due to
than
the TRX in the
Underlaid Subcell
(Traffic Channel)
1278072559 CELL.CALL.DROPS.AFTER.CONN.TRAF.ULCELL
M3314E:Call
Drops After
Answer on the
TRX in the
Underlaid Subcell
(Traffic Channel)
1278072560 CELL.SIG.STATIC.STATE.CALL.DROPS.ULCELL
CM361A:Call
Earlier
Drops on the
than
Signaling Channels V900R011
on the TRX in the
Underlaid Subcell
1278072561 CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.ULCELL
CM330A:Call
Earlier
Drops on the
than
Traffic Channels on V900R011
the TRX in the
Underlaid Subcell
1278072562 CELL.CALL.DROPS.ERR.IND.T200.EXP.SIG.OLCELL
M3620A:Call
Earlier
Drops Due to ERR than
IND Received from V900R011
the Signaling
Channel on the
TRX in the
Overlaid Subcell in
Stable State (T200
Earlier
than
V900R011
20/11/2015
Page 14 of 316
Expired)
1278072563 CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.SIG.OLCELL
M3620B:Call
Earlier
the Signaling
Channel on the
TRX in the
Overlaid Subcell in
Stable State
(Unsolicited DM
Response)
1278072564 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SIG.OLCELL
Earlier
M3620C:Call
the Signaling
Channel on the
TRX in the
Overlaid Subcell in
Stable State
(Sequence Error)
1278072565 CELL.CALL.DROPS.ERR.IND.T200.EXP.TRAF.OLCELL
M3320A:Call
Earlier
the Traffic Channel
on the TRX in the
Overlaid Subcell in
Stable State (T200
Expired)
Earlier
1278072566 CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.TRAF.OLCELL M3320B:Call
the Traffic Channel
on the TRX in the
Overlaid Subcell in
Stable State
(Unsolicited DM
Response)
1278072567 CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TRAF.OLCELL
M3320C:Call
Earlier
the Traffic Channel
on the TRX in the
Overlaid Subcell in
Stable State
(Sequence Error)
1278072568 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SIG.OLCELL
M3621A:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Signaling Channel
on the TRX in the
Overlaid Subcell in
Stable State (Radio
Link Failure)
1278072569 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SIG.OLCELL
M3621B:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Signaling Channel
on the TRX in the
Overlaid Subcell in
Stable State (HO
Access Failure)
1278072570 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SIG.OLCELL
M3621C:Call
Drops Due to
CONN FAIL
Received from the
Signaling Channel
Earlier
than
V900R011
20/11/2015
Page 15 of 316
on the TRX in the

Overlaid Subcell in
Stable State (OM
Intervention)
1278072571 CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.SIG.OLCELL
Earlier
M3621D:Call
than
Drops Due to
V900R011
CONN FAIL
Received from the
Signaling Channel
on the TRX in the
Overlaid Subcell in
Stable State (Radio
Resource Not
Available)
1278072572 CELL.CALL.DROPS.CONN.FAIL.OTHER.SIG.OLCELL
Earlier
M3621E:Call
than
Drops Due to
V900R011
CONN FAIL
Received from the
Signaling Channel
on the TRX in the
Overlaid Subcell in
Stable State
(Others)
1278072573 CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TRAF.OLCELL
M3321A:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State (Radio
Link Failure)
1278072574 CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TRAF.OLCELL
M3321B:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State (HO
Access Failure)
1278072575 CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TRAF.OLCELL
M3321C:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State (OM
Intervention)
1278072576 CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TRAF.OLCELL
M3321D:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State (Radio
Resource Not
Available)
1278072577 CELL.CALL.DROPS.CONN.FAIL.OTHER.TRAF.OLCELL
M3321E:Call
Earlier
Drops Due to
than
CONN FAIL
V900R011
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State
(Others)
20/11/2015
Page 16 of 316
1278072578 CELL.CALL.DROPS.REL.IND.SIG.OLCELL
M3622A:Call
Earlier
Drops Due to the
than
from the Signaling
Channel on the
TRX in the
Overlaid Subcell in
Stable State
1278072579 CELL.CALL.DROPS.REL.IND.TRAF.OLCELL
Earlier
M3322B:Call
than
Drops Due to the
from the Traffic
Channel on the
TRX in the
Overlaid Subcell in
Stable State
1278072580 CELL.CALL.DROPS.NO.MR.SIG.OLCELL
M3623A:Call
Drops Due to No
MR from the MS
on the Signaling
Channel on the
TRX in the
Overlaid Subcell
Earlier
than
V900R011
1278072581 CELL.CALL.DROPS.NO.MR.TRAF.OLCELL
M3323B:Call
Drops Due to No
MR from the MS
on the Traffic
Channel on the
TRX in the
Overlaid Subcell
Earlier
than
V900R011
1278072582 CELL.CALL.DROPS.ABIS.LNK.FAIL.SIG.OLCELL
Earlier
M3623C:Call
V900R011
Terrestrial Link
Failure on the TRX
in the Overlaid
Subcell (Signaling
Channel)
1278072583 CELL.CALL.DROPS.ABIS.LNK.FAIL.TRAF.OLCELL
M3323D:Call
Earlier
Terrestrial Link
V900R011
Failure on the TRX
in the Overlaid
Subcell (Traffic
Channel)
1278072584 CELL.CALL.DROPS.EQUIP.FAIL.SIG.OLCELL
M3623E:Call
Drops Due to TRX
Failure in the
Overlaid Subcell
(Signaling
Channel)
Earlier
than
V900R011
1278072585 CELL.CALL.DROPS.EQUIP.FAIL.TRAF.OLCELL
M3323F:Call
Drops Due to TRX
Failure in the
Overlaid Subcell
(Traffic Channel)
Earlier
than
V900R011
1278072586 CELL.CALL.DROPS.FORCE.HO.SIG.OLCELL
M3624A:Call
Drops Due to
Forced Handover
on the TRX in the
Overlaid Subcell
(Signaling
Channel)
Earlier
than
V900R011
1278072587 CELL.CALL.DROPS.FORCE.HO.TRAF.OLCELL
M3324B:Call
Drops Due to
Forced Handover
on the TRX in the
Overlaid Subcell
(Traffic Channel)
Earlier
than
V900R011
20/11/2015
Page 17 of 316
1278072588 CELL.CALL.DROPS.RES.CHECK.SIG.OLCELL
M3624C:Call
Earlier
Drops Due to
than
the TRX in the
Overlaid Subcell
(Signaling
Channel)
1278072589 CELL.CALL.DROPS.RES.CHECK.TRAF.OLCELL
Earlier
M3324D:Call
than
Drops Due to
the TRX in the
Overlaid Subcell
(Traffic Channel)
1278072590 CELL.CALL.DROPS.AFTER.CONN.TRAF.OLCELL
M3324E:Call
Drops After
Answer on the
TRX in the
Overlaid Subcell
(Traffic Channel)
1278072591 CELL.SIG.STATIC.STATE.CALL.DROPS.OLCELL
CM360A:Call
Earlier
Drops on the
than
Signaling Channels V900R011
on the TRX in the
Overlaid Subcell
1278072592 CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.OLCELL
CM330B:Call
Earlier
Drops on the
than
Traffic Channels on V900R011
the TRX in the
Overlaid Subcell
1278072593 CELL.SD.CALL.DROP
ZTR104C:Call
Drop Rate on
SDCCH
Earlier
than
V900R011
1278072594 CELL.RATE.TCH.CALL.DROP.INCLUDE.HO
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Earlier
than
V900R011
1278072595 CELL.RATE.TCH.CALL.DROP.EXCLUDE.HO
ZTR304A:Call
Drop Rate on TCH
per cell(Excluding
Handover)
Earlier
than
V900R011
1278072596 CELL.TCH.RD.DROP
RM333:Radio Drop Earlier

Rate of TCH
than
V900R011
1278072623 CELL.RATE.TCHH.CALL.DROP
RM327:Call Drop
Rate on TCHH per
cell
Earlier
than
V900R011
1278072624 CELL.RATE.TCHF.CALL.DROP
RM317:Call Drop
Rate on TCHF per
cell
Earlier
than
V900R011
1278072625 CELL.CALL.TCH.SUCC.UNDERLAY
M338:Successful
TCH Seizures on
the TRX in the
Underlaid Subcell
Earlier
than
V900R011
1278072626 CELL.CALL.TCH.SUCC.OVERLAY
M338a:Successful
TCH Seizures on
the TRX in the
OverLaid Subcell
Earlier
than
V900R011
1278072627 CELL.RATE.TCH.CALL.DROP.UNDERLAY
RM330:Call Drop
Rate on TCH on
the TRX in the
Underlaid Subcell
Earlier
than
V900R011
1278072628 CELL.RATE.TCH.CALL.DROP.OVERLAY
RM330a:Call Drop Earlier

Rate on TCH on
than
the TRX in the
V900R011
OverLaid Subcell
Earlier
than
V900R011
20/11/2015
Page 18 of 316
1278072629 CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.ERR.IND
CM3603:Call
Earlier
Channel in Stable
V900R011
State (Error
Indication) (TCH)
1278072630 CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.REL.IND
CM3604:Call
Earlier
Channel in Stable
V900R011
State (Release
Indication) (TCH)
1278072631 CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.CONN.FAIL
Earlier
CM3605:Call
V900R011
Channel in Stable
State (Connection
Failure) (TCH)
1278072632 CELL.SIG.CHAN.STATIC.STATE.CALL.TCH.DROP.TIMES
CM3606:Call
Drops on Radio
Interface in Stable
State (Signaling
Channel)(TCH)
Earlier
than
V900R011
1278072633 CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE.TCHH
RM3271:Call
Drops on Radio
Interface in Stable
State (Traffic
Channel)(TCHH)
Earlier
than
V900R011
1278072634 CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE.TCHF
RM3171:Call
Drops on Radio
Interface in Stable
State (Traffic
Channel)(TCHF)
Earlier
than
V900R011
1278072635 CELL.TRAF.CH.CALL.DROPS.HO.FAIL.TCHH
RM3272:Call
Drops on Radio
Interface in
Handover State
(Traffic Channel)
(TCHH)
Earlier
than
V900R011
1278072636 CELL.TRAF.CH.CALL.DROPS.HO.FAIL.TCHF
RM3172:Call
Drops on Radio
Interface in
Handover State
(Traffic Channel)
(TCHF)
Earlier
than
V900R011
1278072637 CELL.LOOP.START.FAIL.DROPS.TCHH
RM3273:Call
Earlier
Drops Due to Local than
Switch Start Failure V900R011
(TCHH)
1278072638 CELL.LOOP.START.FAIL.DROPS.TCHF
RM3173:Call
Earlier
Drops Due to Local than
Switch Start Failure V900R011
(TCHF)
1278072639 CELL.LOOP.RESTORE.FAIL.DROPS.TCHH
RM3274:Call
Drops Due to
Failures to Return
to Normal Call
from Local Switch
(TCHH)
Earlier
than
V900R011
1278072640 CELL.LOOP.RESTORE.FAIL.DROPS.TCHF
RM3174:Call
Drops Due to
Failures to Return
to Normal Call
from Local Switch
(TCHF)
Earlier
than
V900R011
1278072641 CELL.TRAF.CH.CALL.DROPS.TCHH
RM3275:Call
Drops on Traffic
Channel (TCHH)
Earlier
than
V900R011
1278072642 CELL.TRAF.CH.CALL.DROPS.TCHF
RM3175:Call
Earlier
20/11/2015
Page 19 of 316
Drops on Traffic
Channel (TCHF)
than
V900R011
1278072643 CELL.SIG.CH.CALL.DROPS.TCH
RH3331:Call Drops Earlier

on Signal Channel than
(TCH)
V900R011
1282412154 CELL.A.CLR.REQ.AFTER.ASS.CMP
CM400:Number of V900R011
Clear Requests
Sent on the A
Interface
(Assignment
Complete)
1282412155 CELL.A.CLR.REQ.EQUIPMENT.FAIL
Clear Requests
Sent on the A
Interface
(Equipment
Failure)
1282412156 CELL.A.CLR.REQ.UM.FAIL
Clear Requests
Sent on the A
Interface (Um
Interface Failure)
1282412157 CELL.A.CLR.REQ.UM.MSG.FAIL
Clear Requests
Sent on the A
Interface (Um
Interface Message
Failure)
1282412158 CELL.A.CLR.REQ.OM
Clear Requests
Sent on the A
Interface (OM)
Counter Relationship
None
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
Measurement of Call Drops due to ERR IND in Stable State

ID
Counter
Description
1278072417
CELL.CALL.DROPS.ERR.IND.T200.EXP.SD
M3000A:Call Drops
due to ERR IND
Received on SDCCH
in Stable State (T200
Expired)
1278072418
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.SD
M3000B:Call Drops
due to ERR IND
Received on SDCCH
in Stable State
(Unsolicited DM
Response)
1278072419
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SD
M3000C:Call Drops
due to ERR IND
Received on SDCCH
in Stable State
(Sequence Error)
1278072420
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHF.SIG
M3400A:Call Drops
due to ERR IND
Received on TCHF
20/11/2015
Page 20 of 316
(Signaling Channel)
Expired)
1278072421
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHF.SIG
M3400B:Call Drops
due to ERR IND
Received on TCHF
(Signaling Channel)
in Stable State
(Unsolicited DM
Response)
1278072422
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHF.SIG
M3400C:Call Drops
due to ERR IND
Received on TCHF
(Signaling Channel)
in Stable State
(Sequence Error)
1278072423
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHH.SIG
M3500A:Call Drops
due to ERR IND
Received on TCHH
(Signaling Channel)
Expired)
1278072424
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHH.SIG
M3500B:Call Drops
due to ERR IND
Received on TCHH
(Signaling Channel)
in Stable State
(Unsolicited DM
Response)
1278072425
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHH.SIG
M3500C:Call Drops
due to ERR IND
Received on TCHH
(Signaling Channel)
in Stable State
(Sequence Error)
1278072426
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHF.TRAF
M3100A:Call Drops
due to ERR IND
Received on TCHF
(Traffic Channel) in
Stable State (T200
Expired)
1278072427
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHF.TRAF
M3100B:Call Drops
due to ERR IND
Received on TCHF
Stable State
(Unsolicited DM
Response)
1278072428
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHF.TRAF
M3100C:Call Drops
due to ERR IND
Received on TCHF
Stable State
(Sequence Error)
1278072429
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHH.TRAF
M3200A:Call Drops
due to ERR IND
Received on TCHH
Stable State (T200
Expired)
1278072430
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHH.TRAF
M3200B:Call Drops
due to ERR IND
Received on TCHH
Stable State
(Unsolicited DM
Response)
20/11/2015
Page 21 of 316
1278072431
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHH.TRAF
M3200C:Call Drops
due to ERR IND
Received on TCHH
Stable State
(Sequence Error)
1278072531
CELL.CALL.DROPS.ERR.IND.T200.EXP.SIG.ULCELL
M3610A:Call Drops
Due to the ERR IND
Received from the
Signaling Channel on
the TRX in the
Underlaid Subcell in
Stable State (T200
Expired)
1278072532
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.SIG.ULCELL
M3610B:Call Drops
Due to the ERR IND
Received from the
the TRX in the
Stable State
(Unsolicited DM
Response)
1278072533
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SIG.ULCELL
M3610C:Call Drops
Due to the ERR IND
Received from the
the TRX in the
Stable State
(Sequence Error)
1278072534
CELL.CALL.DROPS.ERR.IND.T200.EXP.TRAF.ULCELL
M3310A:Call Drops
Due to the ERR IND
Received from the
Traffic Channel on
the TRX in the
Stable State (T200
Expired)
1278072535
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TRAF.ULCELL
M3310B:Call Drops
Due to the ERR IND
Received from the
Traffic Channel on
the TRX in the
Stable State
(Unsolicited DM
Response)
1278072536
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TRAF.ULCELL
M3310C:Call Drops
Due to the ERR IND
Received from the
Traffic Channel on
the TRX in the
Stable State
(Sequence Error)
1278072562
CELL.CALL.DROPS.ERR.IND.T200.EXP.SIG.OLCELL
M3620A:Call Drops
Due to ERR IND
Received from the
the TRX in the
Overlaid Subcell in
Stable State (T200
Expired)
1278072563
CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.SIG.OLCELL
M3620B:Call Drops
Due to ERR IND
Received from the
20/11/2015
Page 22 of 316
the TRX in the

Overlaid Subcell in
Stable State
(Unsolicited DM
Response)
1278072564
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SIG.OLCELL
M3620C:Call Drops
Due to ERR IND
Received from the
the TRX in the
Overlaid Subcell in
Stable State
(Sequence Error)
1278072565
CELL.CALL.DROPS.ERR.IND.T200.EXP.TRAF.OLCELL
M3320A:Call Drops
Due to ERR IND
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State (T200
Expired)
1278072566
CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.TRAF.OLCELL M3320B:Call Drops

Due to ERR IND
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State
(Unsolicited DM
Response)
1278072567
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TRAF.OLCELL
M3320C:Call Drops
Due to ERR IND
Received from the
Traffic Channel on
the TRX in the
Overlaid Subcell in
Stable State
(Sequence Error)
Description
After the MS seizes a channel, the BTS sends the BSC an ERR IND message, indicating that call drops occur on the Um interface
because of the abnormal connection at the radio link layer. If the cause value carried in the ERR IND message is timer T200 expired
(N200+1) times (0x01), unsolicited DM response, multiple frame established state: perform abnormal release(0x05), or sequence error
(0x07), this measurement provides the number of call drops due to ERR IND on the basis of the channel type (SDCCH, TCHF, or
TCHH), the service type (signaling or traffic), the concentric attribute (overlaid subcell or underlaid subcell), and the cause value.
Measurement point
The specific counter is incremented by one when the BSC receives an ERR IND message. The counter is measured at A1, as shown in
Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Figure 1 Call drops in the immediate assignment (including very early assignment) procedure
20/11/2015
Page 23 of 316
Measurement points
Description
A1
Call Drops Due to ERR IND Received in Stable State, Call

Drops Due to the ERR IND Received on the TRX in the
Underlaid Subcell in Stable State, Call Drops Due to the ERR
IND Received on the TRX in the Overlaid Subcell in Stable State
A2
Call Drops Due to the CONN FAIL IND Received in Stable

State, Call Drops Due to the CONN FAIL IND Received on the
TRX in the Underlaid Subcell in Stable State, Call Drops Due to
the CONN FAIL IND Received on the TRX in the Overlaid
Subcell in Stable State
A3
Call Drops Due to REL IND Received in Stable State, Call

Drops Due to the REL IND Received on the TRX in the
Underlaid Subcell in Stable State, Call Drops Due to the REL
A4
Call Drops Due to No MR from MS for a Long Time, Call Drops

Due to No MR from the MS on the TRX in the Underlaid
Subcell, Call Drops Due to No MR from the MS on the TRX in
the Overlaid Subcell, Call Drops due to Abis Terrestrial Link
Failure, Call Drops Due to Abis Terrestrial Link Failure on the
TRX in the Underlaid Subcell, Call Drops Due to Abis
Terrestrial Link Failure on the TRX in the Overlaid Subcell, Call
Drops Due to Equipment Failure, Call Drops Due to TRX Failure
in the Underlaid Subcell, Call Drops Due to TRX Failure in the
Overlaid Subcell, Call Drops due to Resource Check, Call Drops
Due to Resource Check on the TRX in the Underlaid Subcell,
Call Drops Due to Resource Check on the TRX in the Overlaid
Subcell
A5
Clear Requests Sent on the A Interface
A6
Call Drops Due to Forced Handover, Call Drops Due to Forced

Handover on the TRX in the Underlaid Subcell, Call Drops Due
to Forced Handover on the TRX in the Overlaid Subcell
A10
Successful SDCCH Seizures (Call Type)
Figure 2 Call drops in the assignment and intra-cell handover (Traffic channel handover) procedure
20/11/2015
Page 24 of 316
Measurement points
Description
A1

A2

A3

A4

Drops Due to Abis Link Failures in Stable Local Switch State,
Call Drops Due to Equipment Failure, Call Drops Due to TRX
Failure in the Underlaid Subcell, Call Drops Due to TRX Failure
in the Overlaid Subcell, Call Drops Due to Resource Check, Call
Drops Due to Resource Check on the TRX in the Underlaid
Subcell, Call Drops Due to Resource Check on the TRX in the
Overlaid Subcell, Call Drops Due to Handover Failure During
the Local Switch, Call Drops Due to Other Causes in Stable State
A5
Clear Requests Sent on the A Interface, Call Drops after Answer,

Call Drops After Answer on the TRX in the Underlaid Subcell,
Call Drops After Answer on the TRX in the Overlaid Subcell
A6
20/11/2015
Page 25 of 316

to Forced Handover on the TRX in the Overlaid Subcell, Failed
Internal Intra-Cell Handovers (Timer Expired)
A7
Call Drops Due to Local Switch Start Failure
A8
Successful TCH Seizures on the TRX in the Underlaid Subcell,

Successful TCH Seizures on the TRX in the OverLaid Subcell,
Call Drops Due to Failures to Return to Normal Call from Local
Switch
A9
Successful Connections
Figure 3 Call drops in the intra-BSC handover procedure (including the signaling channel and the traffic channel)
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 26 of 316

in the Overlaid Subcell, Call Drops due to Resource Check, Call
Overlaid Subcell, Call Drops due to Other Causes Received in
Stable State
A5

A6

Internal Intra-Cell Handovers (Timer Expired), Failed Outgoing
Internal Inter-Cell Handovers (Timer Expired), Call Drops Due
to Handover Failure During the Local Switch
A7
Call Drops due to Failures to Return to Normal Call from Local

Switch
A8

Successful TCH Seizures on the TRX in the OverLaid Subcell
A9
A10
Figure 4 Call drops in the outgoing BSC handover procedure (including the signaling channel and the traffic channel)
Measurement points
Description
A1

A2

A3

20/11/2015
Page 27 of 316
A4

Stable State
A5
A6

Outgoing External Inter-Cell Handovers (T8 Expired), Call
Drops Due to Handover Failure During the Local Switch
A9
Figure 5 Call drops in the incoming BSC handover procedure (including the signaling channel and the traffic channel)
Measurement points
Description
A1

A2

A3

20/11/2015
Page 28 of 316

A4

Stable State
A5
A6

incoming external inter-cell handovers (Timer expired), Call
A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.ERR.IND.T200.EXP.SD
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.SD
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SD
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHF.SIG
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHF.SIG
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHF.SIG
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHF.TRAF
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHF.TRAF
GBFD-111004
Radio Dedicated
Channel Management
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHF.TRAF
GBFD-111004
Radio Dedicated
20/11/2015
Page 29 of 316
Channel Management
CELL.CALL.DROPS.ERR.IND.T200.EXP.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ERR.IND.T200.EXP.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.T200.EXP.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.UNSOLICITED.DM.RESP.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.T200.EXP.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.T200.EXP.TRAF.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.TRAF.OLCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ERR.IND.SEQ.ERR.TRAF.OLCELL
Concentric Cell
GBFD-113201

Measurement of Call Drops due to CONN FAIL IND in Stable

State
ID
Counter
Description
1278072432
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SD
M3001A:Call Drops due

to CONN FAIL Received
on SDCCH in Stable
State (Radio Link Failure)
1278072433
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SD
M3001B:Call Drops due

on SDCCH in Stable
State (HO Access Failure)
1278072434
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SD
M3001C:Call Drops due

on SDCCH in Stable
State (OM Intervention)
1278072435
CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.SD
M3001D:Call Drops due

on SDCCH in Stable
State (Radio Resource
Unavailable)
1278072436
CELL.CALL.DROPS.CONN.FAIL.OTHER.SD
M3001E:Call Drops due

on SDCCH in Stable
State (Other Causes)
1278072437
CELL.CALL.DROPS.CONN.FAIL.RL.TCHF.SIG

on TCHF (Signaling
Channel) in Stable State
(Radio Link Failure)
1278072438
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHF.SIG

on TCHF (Signaling
(HO Access Failure)
20/11/2015
Page 30 of 316
1278072439
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHF.SIG

on TCHF (Signaling
(OM Intervention)
1278072440
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TCHF.SIG

on TCHF (Signaling
(Radio Resource
Unavailable)
1278072441
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHF.SIG

on TCHF (Signaling
(Other Causes)
1278072442
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHH.SIG

on TCHH (Signaling
1278072443
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHH.SIG

on TCHH (Signaling
(HO Access Failure)
1278072444
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHH.SIG

on TCHH (Signaling
(OM Intervention)
1278072445
CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.TCHH.SIG

on TCHH (Signaling
(Radio Resource
Unavailable)
1278072446
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHH.SIG

on TCHH (Signaling
(Other Causes)
1278072447
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHF.TRAF

on TCHF (Traffic
1278072448
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHF.TRAF

on TCHF (Traffic
(HO Access Failure)
1278072449
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHF.TRAF

on TCHF (Traffic
(OM Intervention)
1278072450
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TCHF.TRAF

on TCHF (Traffic
(Radio Resource
Unavailable)
1278072451
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHF.TRAF

on TCHF (Traffic
20/11/2015
Page 31 of 316

(Other Causes)
1278072452
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHH.TRAF

on TCHH (Traffic
1278072453
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHH.TRAF

on TCHH (Traffic
(HO Access Failure)
1278072454
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHH.TRAF

on TCHH (Traffic
(OM Intervention)
1278072455
CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.TCHH.TRAF

on TCHH (Traffic
(Radio Resource
Unavailable)
1278072456
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHH.TRAF

on TCHH (Traffic
(Other Causes)
1278072537
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SIG.ULCELL
M3611A:Call Drops Due

to the CONN FAIL
Received from the
Signaling Channel on the
TRX in the Underlaid
1278072538
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SIG.ULCELL
M3611B:Call Drops Due

to the CONN FAIL
Received from the
(HO Access Failure)
1278072539
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SIG.ULCELL
M3611C:Call Drops Due

to the CONN FAIL
Received from the
(OM Intervention)
1278072540
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.SIG.ULCELL
M3611D:Call Drops Due

to the CONN FAIL
Received from the
(Radio Resource Not
Available)
1278072541
CELL.CALL.DROPS.CONN.FAIL.OTHER.SIG.ULCELL
M3611E:Call Drops Due

to the CONN FAIL
Received from the
(Others)
1278072542
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TRAF.ULCELL

to the CONN FAIL
Received from the Traffic
20/11/2015
Page 32 of 316
Channel on the TRX in

the Underlaid Subcell in
Stable State (Radio Link
Failure)
1278072543
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TRAF.ULCELL
1278072544
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TRAF.ULCELL M3311C:Call Drops Due

to the CONN FAIL
Stable State (OM
Intervention)
1278072545
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TRAF.ULCELL

to the CONN FAIL
Stable State (Radio
Resource Not Available)
1278072546
CELL.CALL.DROPS.CONN.FAIL.OTHER.TRAF.ULCELL

to the CONN FAIL
Stable State (Others)
1278072568
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SIG.OLCELL

from the Signaling
the Overlaid Subcell in
Stable State (Radio Link
Failure)
1278072569
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SIG.OLCELL

from the Signaling
Stable State (HO Access
Failure)
1278072570
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SIG.OLCELL
M3621C:Call Drops Due

from the Signaling
Stable State (OM
Intervention)
1278072571
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.SIG.OLCELL

from the Signaling
Stable State (Radio
Resource Not Available)
1278072572
CELL.CALL.DROPS.CONN.FAIL.OTHER.SIG.OLCELL

from the Signaling
Stable State (Others)
1278072573
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TRAF.OLCELL


to the CONN FAIL
Stable State (HO Access
Failure)
20/11/2015
Page 33 of 316
from the Traffic Channel

on the TRX in the
Overlaid Subcell in Stable
State (Radio Link Failure)
1278072574
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TRAF.OLCELL

on the TRX in the
State (HO Access Failure)
1278072575
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TRAF.OLCELL M3321C:Call Drops Due

on the TRX in the
State (OM Intervention)
1278072576
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TRAF.OLCELL

on the TRX in the
State (Radio Resource
Not Available)
1278072577
CELL.CALL.DROPS.CONN.FAIL.OTHER.TRAF.OLCELL

on the TRX in the
State (Others)
Description
After the MS seizes a channel, the BTS sends the BSC a CONN FAIL IND message, indicating that call drops occur on the Um
interface because of the abnormal connection at the radio link layer. If the cause value carried in the CONN FAIL message received
by the BSC is radio link failure (0x01), handover access failure (0x02), om intervention (0x07), or radio resource not available (0x21),
this measurement provides the number of call drops related to CONN FAIL IND on the basis of the channel type (SDCCH, TCHF, or
TCHH), the service type (signaling or traffic), the concentric attribute (overlaid subcell or underlaid subcell), and the cause value.
Measurement point
The specific counter is incremented by one when the BSC receives a CONN FAIL IND message.
The counter is measured at A2, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
20/11/2015
Page 34 of 316
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
Figure 2 Call drops in the assignment and intra-cell handover (traffic channel handover) procedure
20/11/2015
Page 35 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 36 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 37 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 38 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 39 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SD
GBFD-111004
Radio Dedicated Channel

Management
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SD
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SD
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.SD
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.OTHER.SD
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.RL.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHH.SIG
GBFD-113401
Half Rate Speech
20/11/2015
Page 40 of 316
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.NO.RADIO.RES.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.OTHER.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OTHER.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OTHER.TRAF.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OTHER.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RL.FAIL.TRAF.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.HO.ACCESS.FAIL.TRAF.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OM.INTERVENTION.TRAF.OLCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.RADIO.RES.NO.TRAF.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.CONN.FAIL.OTHER.TRAF.OLCELL
GBFD-113201
Concentric Cell

Measurement of Call Drops due to REL IND in Stable State

ID
Counter
Description
1278072457
CELL.CALL.DROPS.REL.IND.SD
M3002:Call Drops due to REL IND

Received on SDCCH
1278072458
CELL.CALL.DROPS.REL.IND.TCHF.SIG
20/11/2015
Page 41 of 316
Received on TCHF (Signaling

Channel)
1278072459
CELL.CALL.DROPS.REL.IND.TCHF.TRAF

Received on TCHF (Traffic Channel)
1278072460
CELL.CALL.DROPS.REL.IND.TCHH.SIG

Received on TCHH (Signaling
Channel)
1278072461
CELL.CALL.DROPS.REL.IND.TCHH.TRAF

Received on TCHH (Traffic Channel)
1278072547
CELL.CALL.DROPS.REL.IND.SIG.ULCELL
M3612A:Call Drops Due to the REL

IND Received from the Signaling
Channel on the TRX in the Underlaid
1278072548
CELL.CALL.DROPS.REL.IND.TRAF.ULCELL M3312B:Call Drops Due to the REL

IND Received from the Traffic
Channel on the TRX in the Underlaid
1278072578
CELL.CALL.DROPS.REL.IND.SIG.OLCELL
1278072579
CELL.CALL.DROPS.REL.IND.TRAF.OLCELL M3322B:Call Drops Due to the REL

IND Received from the Traffic
Channel on the TRX in the Overlaid
M3622A:Call Drops Due to the REL

IND Received from the Signaling
Channel on the TRX in the Overlaid
Description
The connection between the MS and the BTS fails, therefore, when the BTS in the multi-frame link set-up state receives the DISC
frame from the MS, the BTS sends the BSC an REL IND message indicating that call drops occur on the Um interface. This
measurement provides the number of call drops related to REL IND based on the channel type (SDCCH, TCHF, or TCHH), the
service type (signaling or traffic), and the concentric attribute (overlaid subcell or underlaid subcell).
Measurement point
The specific counter is incremented by one when the BSC receives an REL IND message.
Measurement points
Description
A1

20/11/2015
Page 42 of 316

A2

A3

A4

Subcell
A5
A6

A10
Figure 2 Call drops in the assignment and intra-cell handover (traffic channel handover) procedure
Measurement points
Description
20/11/2015
Page 43 of 316
A1

A2

A3

A4

Drops Due to Abis Link Failures in Stable local switching State,
the local switching, Call Drops Due to Other Causes in Stable
State
A5

A6

A7
Call Drops Due to local switching Start Failure
A8

Call Drops Due to Failures to Return to Normal Call from local
switching
A9
20/11/2015
Page 44 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 45 of 316

to Handover Failure During the local switching
A7
Call Drops due to Failures to Return to Normal Call from local

switching
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 46 of 316

Stable State
A5
A6

Drops Due to Handover Failure During the local switching
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 47 of 316

Stable State
A5
A6

A7

switching
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.REL.IND.SD
GBFD-111004
Radio Dedicated Channel Management
CELL.CALL.DROPS.REL.IND.TCHF.SIG
GBFD-111004
CELL.CALL.DROPS.REL.IND.TCHF.TRAF
GBFD-111004
CELL.CALL.DROPS.REL.IND.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.REL.IND.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.REL.IND.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.REL.IND.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.REL.IND.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.REL.IND.TRAF.OLCELL GBFD-113201
Concentric Cell

Measurement of Call Drops Due to No MR from MS for a

Long Time
ID
Counter
Description
1278072462
CELL.CALL.DROPS.NO.MR.SD
M302:Call Drops Due to No MR from

MS for a Long Time (SDCCH)
1278072463
CELL.CALL.DROPS.NO.MR.TCHF.SIG

MS for a Long Time (TCHF) (Signaling
Channel)
1278072464
CELL.CALL.DROPS.NO.MR.TCHF.TRAF

MS for a Long Time (TCHF) (Traffic
Channel)
1278072465
CELL.CALL.DROPS.NO.MR.TCHH.SIG

MS for a Long Time (TCHH) (Signaling
20/11/2015
Page 48 of 316
Channel)
1278072466
CELL.CALL.DROPS.NO.MR.TCHH.TRAF

MS for a Long Time (TCHH) (Traffic
Channel)
1278072549
CELL.CALL.DROPS.NO.MR.SIG.ULCELL
M3613A:Call Drops Due to No MR

from the MS on the Signaling Channel
on the TRX in the Underlaid Subcell
1278072550
CELL.CALL.DROPS.NO.MR.TRAF.ULCELL M3313B:Call Drops Due to No MR

from the MS on the Traffic Channel on
the TRX in the Underlaid Subcell
1278072580
CELL.CALL.DROPS.NO.MR.SIG.OLCELL
1278072581
CELL.CALL.DROPS.NO.MR.TRAF.OLCELL M3323B:Call Drops Due to No MR

from the MS on the Traffic Channel on
the TRX in the Overlaid Subcell
M3623A:Call Drops Due to No MR

from the MS on the Signaling Channel
on the TRX in the Overlaid Subcell
Description
After seizing an SDCCH, the MS reports a measurement report to the BSC every 470 ms. After seizing a TCH, the MS reports a
measurement report to the BSC every 480 ms. If the BSC does not receive a measurement report within a certain period (five minutes
by default), the BSC determines that a call drop occurs on the Um interface. This measurement provides the number of call drops due
to no MR on the basis of the channel type (SDCCH, TCHF, or TCHH), the service type (signaling or traffic), and the concentric
attribute (overlaid subcell or underlaid subcell).
Measurement point
When the BSC does not receive a measurement report within a certain period of time (five minutes, by default), the BSC sends a
CLEAR REQUEST message to the MSC to release the call, and the specific counter is incremented by one.
The specific counter is measured at A4, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Measurement points
Description
A1

A2

20/11/2015
Page 49 of 316
A3

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

20/11/2015
Page 50 of 316

A3

A4

State
A5

A6

A7
A8

switching
A9
20/11/2015
Page 51 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 52 of 316

A7

switching
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 53 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 54 of 316

Stable State
A5
A6

A7

switching
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.NO.MR.SD
GBFD-111004
CELL.CALL.DROPS.NO.MR.TCHF.SIG
GBFD-111004
CELL.CALL.DROPS.NO.MR.TCHF.TRAF
GBFD-111004
CELL.CALL.DROPS.NO.MR.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.NO.MR.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.NO.MR.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.NO.MR.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.NO.MR.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.NO.MR.TRAF.OLCELL GBFD-113201
Concentric Cell

Measurement of Call Drops Due to Abis Terrestrial Link

Failure
ID
Counter
Description
1278072467
CELL.CALL.DROPS.ABIS.LNK.FAIL.SD
M303:Call Drops due to Abis

Terrestrial Link Failure (SDCCH)
1278072468
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHF.SIG

Terrestrial Link Failure (TCHF)
(Signaling Channel)
1278072469
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHF.TRAF

Terrestrial Link Failure (TCHF)
(Traffic Channel)
1278072470
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHH.SIG

Terrestrial Link Failure (TCHH)
20/11/2015
Page 55 of 316
(Signaling Channel)
1278072471
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHH.TRAF

Terrestrial Link Failure (TCHH)
(Traffic Channel)
1278072551
CELL.CALL.DROPS.ABIS.LNK.FAIL.SIG.ULCELL
M3613C:Call Drops Due to Abis

Terrestrial Link Failure on the TRX
in the Underlaid Subcell (Signaling
Channel)
1278072552
CELL.CALL.DROPS.ABIS.LNK.FAIL.TRAF.ULCELL M3313D:Call Drops Due to Abis

in the Underlaid Subcell (Traffic
Channel)
1278072582
CELL.CALL.DROPS.ABIS.LNK.FAIL.SIG.OLCELL
1278072583
CELL.CALL.DROPS.ABIS.LNK.FAIL.TRAF.OLCELL M3323D:Call Drops Due to Abis

in the Overlaid Subcell (Traffic
Channel)
M3623C:Call Drops Due to Abis

in the Overlaid Subcell (Signaling
Channel)
Description
After the MS seizes a channel, the call may be released because the RSL of the TRX carrying the channel is broken. Then, this
measurement provides the number of call drops due to Abis terrestrial link failure on the basis of the channel type (SDCCH, TCHF, or
TCHH), the service type (signaling or traffic), and the concentric attribute (overlaid subcell or underlaid subcell).
Measurement point
When the BSC detects a broken RSL, the BSC releases all the calls on the link and the specific counter is incremented by one.
The specific counter is measured at A4, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Measurement points
Description
A1

A2

20/11/2015
Page 56 of 316

A3

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

20/11/2015
Page 57 of 316

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 58 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 59 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 60 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 61 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.ABIS.LNK.FAIL.SD
GBFD-111004

Management
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ABIS.LNK.FAIL.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.ABIS.LNK.FAIL.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ABIS.LNK.FAIL.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ABIS.LNK.FAIL.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.ABIS.LNK.FAIL.TRAF.OLCELL GBFD-113201
Concentric Cell

Measurement of Call Drops Due to Equipment Failure

ID
Counter
Description
1278072472
CELL.CALL.DROPS.EQUIP.FAIL.SD
M304:Call Drops Due to Equipment

Failure (SDCCH)
1278072473
CELL.CALL.DROPS.EQUIP.FAIL.TCHF.SIG
M344:Call Drops due to Equipment

Failure (TCHF) (Signaling Channel)
1278072474
CELL.CALL.DROPS.EQUIP.FAIL.TCHF.TRAF

Failure (TCHF) (Traffic Channel)
1278072475
CELL.CALL.DROPS.EQUIP.FAIL.TCHH.SIG

Failure (TCHH) (Signaling Channel)
1278072476
CELL.CALL.DROPS.EQUIP.FAIL.TCHH.TRAF
20/11/2015
Page 62 of 316
Failure (TCHH) (Traffic Channel)

1278072553
CELL.CALL.DROPS.EQUIP.FAIL.SIG.ULCELL
M3613E:Call Drops Due to TRX

Failure in the Underlaid Subcell
(Signaling Channel)
1278072554
CELL.CALL.DROPS.EQUIP.FAIL.TRAF.ULCELL M3313F:Call Drops Due to TRX

Failure in the Underlaid Subcell
(Traffic Channel)
1278072584
CELL.CALL.DROPS.EQUIP.FAIL.SIG.OLCELL
1278072585
CELL.CALL.DROPS.EQUIP.FAIL.TRAF.OLCELL M3323F:Call Drops Due to TRX

Failure in the Overlaid Subcell
(Traffic Channel)
M3623E:Call Drops Due to TRX

Failure in the Overlaid Subcell
(Signaling Channel)
Description
After the MS seizes a channel, the call may be released because of the internal error of the BSC. Then, this measurement provides the
number of call drops due to equipment failure on the basis of the channel type (SDCCH, TCHF, or TCHH), the service type (signaling
or traffic), and the concentric attribute (overlaid subcell or underlaid subcell).
Measurement point
This counter is measured in the following situations, on the basis of channel type, service type, and concentric attribute.
z
z
z
A call drop occurs because of any of the following: TRX mutual aid; dynamic modification of cell attributes, TRX frequencies,
or TRX FH data; dynamic deletion of cells or TRXs; blocking of cells, TRXs, or channels.
The timer set to wait for the outgoing BSC handover command expires, or the clear request message is received from the MSC
before the timer expires, and the handover cause is other causes than OM intervention, MSC triggering, or preemption.
A call drop occurs because of call assignment failure during the handover.
The MSC cannot send a short message because of the restriction on sending downlink short messages in data configuration or
because of flow control, and then the call is released.
A call drop occurs because of software error.
Measurement points
Description
A1

A2

20/11/2015
Page 63 of 316

A3

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

20/11/2015
Page 64 of 316

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 65 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 66 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 67 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 68 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.EQUIP.FAIL.SD
GBFD-111004

Management
CELL.CALL.DROPS.EQUIP.FAIL.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.EQUIP.FAIL.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.EQUIP.FAIL.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.EQUIP.FAIL.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.EQUIP.FAIL.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.EQUIP.FAIL.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.EQUIP.FAIL.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.EQUIP.FAIL.TRAF.OLCELL GBFD-113201
Concentric Cell

Measurement of Call Drops Due to Forced Handover

ID
Counter
Description
1278072477
CELL.CALL.DROPS.FORCE.HO.SD
M305:Call Drops due to Forced

Handover (SDCCH)
1278072478
CELL.CALL.DROPS.FORCE.HO.TCHF.SIG

Handover (TCHF) (Signaling
Channel)
1278072479
CELL.CALL.DROPS.FORCE.HO.TCHF.TRAF

Handover (TCHF) (Traffic Channel)
1278072480
CELL.CALL.DROPS.FORCE.HO.TCHH.SIG

Handover (TCHH) (Signaling
20/11/2015
Page 69 of 316
Channel)
1278072481
CELL.CALL.DROPS.FORCE.HO.TCHH.TRAF

Handover (TCHH) (Traffic Channel)
1278072555
CELL.CALL.DROPS.FORCE.HO.SIG.ULCELL
M3614A:Call Drops Due to Forced

Handover on the TRX in the
Underlaid Subcell (Signaling
Channel)
1278072556
CELL.CALL.DROPS.FORCE.HO.TRAF.ULCELL M3314B:Call Drops Due to Forced

Handover on the TRX in the
Underlaid Subcell (Traffic Channel)
1278072586
CELL.CALL.DROPS.FORCE.HO.SIG.OLCELL
1278072587
CELL.CALL.DROPS.FORCE.HO.TRAF.OLCELL M3324B:Call Drops Due to Forced

Handover on the TRX in the Overlaid
Subcell (Traffic Channel)
M3624A:Call Drops Due to Forced

Handover on the TRX in the Overlaid
Subcell (Signaling Channel)
Description
After an MS seizes a channel, if the system initiates a forced handover and the handover fails, the BSC may initiate a call release
procedure. This measurement provides the number of call drops due to forced handovers on the basis of the channel type (SDCCH,
TCHF, or TCHH), the service type (signaling or traffic), and the concentric attribute (overlaid subcell or underlaid subcell).
Measurement point
This counter is measured in the following situations:
z
The timer expires before the outgoing BSC handover command is received, or the CLEAR REQUEST message is received
from the MSC before the timer expires, and the handover cause is OM intervention, MSC triggering, or preemption.
A call drop occurs during the emergency handover due to PDCH assignment, or the handover due to TRX mutual aid,
preemption, or blocking of cells, TRXs, and channels.
This counter is calculated at A6, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Measurement points
Description
A1

A2

20/11/2015
Page 70 of 316

A3

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

20/11/2015
Page 71 of 316

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 72 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 73 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 74 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 75 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.FORCE.HO.SD
GBFD-111004

Management
CELL.CALL.DROPS.FORCE.HO.TCHF.SIG
GBFD-111004

Management
CELL.CALL.DROPS.FORCE.HO.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.FORCE.HO.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.FORCE.HO.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.FORCE.HO.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.FORCE.HO.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.FORCE.HO.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.FORCE.HO.TRAF.OLCELL GBFD-113201
Concentric Cell

Measurement of Call Drops After Answer

ID
Counter
Description
1278072487
CELL.CALL.DROPS.AFTER.CONN.TCHF.TRAF
M317:Call Drops after Answer

(TCHF) (Traffic Channel)
1278072488
CELL.CALL.DROPS.AFTER.CONN.TCHH.TRAF
M327:Call Drops after Answer

(TCHH) (Traffic Channel)
1278072559
CELL.CALL.DROPS.AFTER.CONN.TRAF.ULCELL M3314E:Call Drops After Answer

on the TRX in the Underlaid Subcell
(Traffic Channel)
1278072590
CELL.CALL.DROPS.AFTER.CONN.TRAF.OLCELL M3324E:Call Drops After Answer

on the TRX in the Overlaid Subcell
20/11/2015
Page 76 of 316
(Traffic Channel)
Description
The measurement of this type of counters provides the number of call drops after the call is set up successfully. In the assignment
procedure, a call is set up when the BSC receives the CONNECT and the CONNECT ACKNOWLEDGE messages from the CC
layer. In the incoming-BSC handover procedure, a call is set up when the target cell sends a HANDOVER COMPLETE message to
the MSC. In the internal BSC handover procedure, a call is set up when a HANDOVER PERFORMED message is sent to the MSC
after the MS is handed over to the target cell. The BSC measures this counter when call drop occur after the assignment procedure or
the handover procedure.
Measurement point
The specific counter is measured at A1, A2, A3, and A4, as shown in Figure 1, Figure 2, Figure 3, and Figure 4.
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 77 of 316

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 78 of 316

A5

A6

A7
A8

Switch
A9
Figure 3 Call drops in the intra-BSC handover procedure (including the signaling channel and Traffic channel)
Measurement points
Description
A1

20/11/2015
Page 79 of 316

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Figure 4 Call drops in the outgoing BSC handover procedure (including the signaling channel and Traffic channel)
20/11/2015
Page 80 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
Figure 5 Call drops in the incoming BSC handover procedure (including the signaling channel and Traffic channel)
20/11/2015
Page 81 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 82 of 316
Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.AFTER.CONN.TCHF.TRAF
GBFD-111004

Management
CELL.CALL.DROPS.AFTER.CONN.TCHH.TRAF
GBFD-113401
Half Rate Speech
CELL.CALL.DROPS.AFTER.CONN.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.AFTER.CONN.TRAF.OLCELL GBFD-113201
Concentric Cell

Measurement of Successful Connections

ID
Counter
Description
1278072489
CELL.CONN.TCHF.TRAF
M318:Successful Connections (TCHF)

(Traffic Channel)
1278072490
CELL.CONN.TCHH.TRAF
M328:Successful Connections (TCHH)

(Traffic Channel)
Description
When the BSC detects a CONNECT ACKNOWLEDGE message, the BSC regards that a call is set up successfully. The BSC
measures the specific counter on the basis of the channel type (TCHF or TCHH).
Measurement point
The specific counter is incremented by one when the BSC detects a CONNECT ACKNOWLEDGE message.
The counter is measured at A9, as shown in Figure 1, Figure 2, Figure 3, and Figure 4.
20/11/2015
Page 83 of 316
Measurement points
Description
A1

A2

A3

A4

State
A5

20/11/2015
Page 84 of 316
A6

A7
A8

switching
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 85 of 316

Stable State
A5

A6

A7

switching
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 86 of 316

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

20/11/2015
Page 87 of 316
A3

A4

Stable State
A5
A6

A7

switching
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CONN.TCHF.TRAF GBFD-110501
Call Control
CELL.CONN.TCHH.TRAF GBFD-113401
Half Rate Speech

Measurement of Clear Requests Sent on the A Interface

ID
Counter
Description
1278072491
CELL.A.CLR.REQ.SD
M309:Clear Requests Sent on the A

Interface (SDCCH)
1278072492
CELL.A.CLR.REQ.TCHF.SIG

Interface (TCHF) (Signaling Channel)
1278072493
CELL.A.CLR.REQ.TCHH.SIG

Interface (TCHH) (Signaling Channel)
1278072494
CELL.A.CLR.REQ.TCHF.TRAF.STATIC M319A:Clear Requests Sent on the A

Interface (TCHF) (Traffic Channel)
(Stable State)
20/11/2015
Page 88 of 316
1278072495
CELL.A.CLR.REQ.TCHF.TRAF.HO
M319B:Clear Requests Sent on the A

Interface in Handover State (TCHF)
(Traffic Channel)
1278072496
CELL.A.CLR.REQ.TCHH.TRAF.STATIC M329A:Clear Requests Sent on the A

Interface in Stable State (TCHH) (Traffic
Channel)
1278072497
CELL.A.CLR.REQ.TCHH.TRAF.HO
M329B:Clear Requests Sent on the A

Interface in Handover State (TCHH)
(Traffic Channel)
1278072529
CELL.A.CLR.REQ.TALIMIT
CM339C:Clear Requests Sent on the A

interface (TA Limit)
Description
After the MS seizes a channel, the BSC may send a CLEAR REQ message to the MSC. This measurement provides the number of
clear requests sent over the A interface on the basis of the channel type (SDCCH, TCHF, or TCHH), the service type (signaling or
traffic), and the call state (stable state or handover state).
After the MS seizes a channel, if TA Limit is enabled on the BSC and the TA exceeds the threshold, the BSC sends a CLEAR REQ
message to release the call. The counter Clear Requests Sent on the A interface (TA Limit) provides the number of clear requests of
this type sent on the A interface.
Measurement point
The specific counter is measured when the BSC sends a CLEAR REQ message to the MSC.
Measurement points
Description
A1

A2

A3

20/11/2015
Page 89 of 316
A4

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 90 of 316

A4

A5

A6

A7
A8

Switch
A9
Measurement points
Description
20/11/2015
Page 91 of 316
A1

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 92 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 93 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 94 of 316
Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.A.CLR.REQ.SD
GBFD-110501
Call Control
CELL.A.CLR.REQ.TCHF.SIG
GBFD-110501
Call Control
CELL.A.CLR.REQ.TCHH.SIG
GBFD-113401
Half Rate Speech
CELL.A.CLR.REQ.TCHF.TRAF.STATIC GBFD-110501
Call Control
CELL.A.CLR.REQ.TCHF.TRAF.HO
Call Control
GBFD-110501
CELL.A.CLR.REQ.TCHH.TRAF.STATIC GBFD-113401
Half Rate Speech
CELL.A.CLR.REQ.TCHH.TRAF.HO
GBFD-113401
Half Rate Speech
CELL.A.CLR.REQ.TALIMIT
GBFD-110501
Call Control

Call Drops on Traffic Channel

ID
Counter
Description
1278072498
CELL.TRAF.CH.CALL.DROPS
CM33:Call Drops on Traffic Channel
Description
This measurement provides the number of call drops due to various reasons after the MS seizes a traffic channel.
The MS seizures a TCH in any of the following conditions:
The MS sends an ASS CMP message to the BSC;
The MS seizes a TCH and sends an HO CMP message to the BSC.
Measurement point
When a TCH is seized to carry traffic during a call, this counter is measured in the following situations:
z
z
z
z
z
z
The BSC receives an ERROR INDICATION message from the BTS because of the abnormal connection at the radio link layer.
For details, refer to GSM Rec. 08.58.
The BSC receives a CONNECTION FAILURE INDICATION message from the BTS because of the radio link fault or
hardware fault. For details, refer to GSM Rec. 08.58.
When receiving a DISC frame on a link layer connection in multi-frame mode, the BTS sends a REL IND message to the BSC.
The timer set to wait for an HANDOVER COMPLETE message expires during internal intra-cell handover.
The timer set to wait for an HANDOVER COMPLETE message expires during outgoing internal inter-cell handover.
The timer set to wait for an HANDOVER COMPLETE message expires during outgoing external inter-cell handover.
The timer set to wait for an HANDOVER COMPLETE message expires during incoming external inter-cell handover.
The BSC does not receive any measurement report within a certain period (by default, five minutes) and sends a CLEAR
REQUEST message to the MSC to release the call.
The BSC detects a broken RSL and releases all the calls on the RSL.
20/11/2015
z
z
z
z
Page 95 of 316
A call drop occurs due to any of the following situations: TRX mutual aid; dynamic modification of cell attributes, TRX
frequencies, or TRX FH data; dynamic deletion of cells or TRXs; blocking of cells, TRXs, or channels.
before the timer expires.
A call drop occurs due to call assignment failure during the handover.
The MSC cannot send a short message because the data configuration prohibits the downlink short messages or because of flow
control and the call is released.
A call drop occurs due to software error.
After seizing a channel, the MS fails to start a local switching due to terrestrial resource request failure, failures on the BTS
side, or timer expiration.
After a call is in the BSC or BTS local switching state, if the local switching cannot be proceeded for handover or other reasons,
the BSC restores the call to the common call state. If the restoration fails due to terrestrial resource request failure or other
reasons, the BSC releases the call.
This counter is calculated at A1, A2, A3, and A4, as shown in Figure 1, Figure 2, Figure 3, and Figure 4.
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 96 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2
20/11/2015
Page 97 of 316
A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 98 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 99 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 100 of 316
Switch
A8

A9
A10
Formula
Call Drops on Traffic Channel = [Call Drops on Radio Interface in Stable State (Traffic Channel)] + [Call Drops on Radio Interface in
Handover State (Traffic Channel)] + [Call Drops Due to No MR from MS for a Long Time (Traffic Channel)] + [Call Drops due to
Abis Terrestrial Link Failure (Traffic Channel)] + [Call Drops due to Equipment Failure (Traffic Channel)] + [Call Drops due to
Forced Handover (Traffic Channel)] + [Call Drops Due to Local Switch Start Failure(TCHH)] + [Call Drops Due to Local Switch
Start Failure(TCHF)] + [Call Drops Due to Failures to Return to Normal Call from Local Switch (TCHH)]+ [Call Drops Due to
Failures to Return to Normal Call from Local Switch (TCHF)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.TRAF.CH.CALL.DROPS
GBFD-111004

Call Drops on Radio Interface in Stable State (Signaling

Channel)
ID
Counter
Description
1278072499
CELL.SIG.STATIC.STATE.CALL.DROPS CM360:Call Drops on Radio Interface in

Stable State (Signaling Channel)
Description
This measurement provides the number of calls released because of the ERR IND, CONN FAIL IND, and REL IND messages
received by the BSC after the MS seizes a signaling channel.
The MS seizes a signaling channel in any of the following conditions:
In the immediate assignment procedure, the BTS sends an EST IND message to the BSC.
The MS sends a HANDOVER COMPLETE message to the BSC, and the MS seizes a signaling channel.
Measurement point
When a signaling channel is seized during a call, this counter is measured in the following situations:
1. The BSC receives an ERROR INDICATION message from the BTS because of the abnormal connection on the radio link layer.
2. The BSC receives a CONNECTION FAILURE INDICATION message from the BTS because of link fault or hardware fault on
the radio link layer. For details, refer to GSM Rec. 08.58.
3. When receiving a DISC frame on a link layer connection in multi-frame mode, the BTS sends a REL IND message to the BSC. For
details, refer to GSM Rec. 08.58.
This counter is calculated at A1, A2, and A3, as shown in Figure 1.
20/11/2015
Page 101 of 316
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
Formula
Call Drops on Radio Interface in Stable State (Signaling Channel) = [Call Drops on Signaling Channel in Stable State (Error
Indication)] + [Call Drops on Signaling Channel in Stable State (Connection Failure)] + [Call Drops on Signaling Channel in Stable
State (Release Indication)]
Unit
None
Related Features
20/11/2015
Counter
Feature ID
CELL.SIG.STATIC.STATE.CALL.DROPS GBFD-111004
Page 102 of 316
Feature Name

Call Drops on Radio Interface in Handover State (Signaling

Channel)
ID
Counter
Description
1278072500
CELL.SIG.HO.STATE.CALL.DROPS
CM361:Call Drops on Radio Interface in

Handover State (Signaling Channel)
Description
Signaling channel handover refers to the intra-BSC or inter-BSC handover that occurs on the signaling channel (SDCCH, TCHF, or
TCHH) with the service type of signaling. This measurement provides the number of call releases due to handover failure caused by
various reasons on the radio interface after the MS accesses the signaling channel (SDCCH, TCHF, or TCHH) assigned by the BSC.
Measurement point
1. The timer set to wait for an HO CMP message expires during internal intra-cell handover.
2. The timer set to wait for an HO CMP message expires during outgoing internal inter-cell handover.
3. The timer set to wait for an HO CMP message expires during outgoing external inter-cell handover.
4. The timer set to wait for an HO CMP message expires during incoming external inter-cell handover.
This counter is calculated at A1, A2, and A3, as shown in Figure 1, Figure 2, Figure 3, and Figure 4.
20/11/2015
Page 103 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 104 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 105 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 106 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 107 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Radio Interface in Handover State (Signaling Channel) = [Failed Internal Intra-Cell Handovers (Timer Expired)
(SDCCH)] + [Failed Internal Intra-Cell Handovers (Timer Expired) (TCHF) (Signaling Channel)] + [Failed Internal Intra-Cell
Handovers (Timer Expired) (TCHH) (Signaling Channel)] + [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer
Expired) (SDCCH) (Excluding Directed Retry)] + [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired)
(Directed Retry)] + [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired) (TCHF) (Signaling Channel)]
+ [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired) (TCHH) (Signaling Channel)] + [Failed
Outgoing External Inter-Cell Handovers (T8 Expiry) (SDCCH) (Excluding Directed Retry)] + [Failed Outgoing External Inter-Cell
Handovers (T8 Expiry) (Directed Retry)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHF) (Signaling
Channel)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHH) (Signaling Channel)] + [Failed Incoming External
Inter-Cell Handovers (Timer Expired) (SDCCH)] + [Failed Incoming External Inter-Cell Handovers (Timer Expired) (TCH)
(Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.HO.STATE.CALL.DROPS GBFD-111004
Feature Name

Call Drops on Signaling Channel

ID
Counter
Description
1278072501
CELL.SIG.CALL.DROPS
CM36:Call Drops on Signaling Channel
Description
20/11/2015
Page 108 of 316
This measurement provides the number of abnormal call releases due to various reasons after the MS seizes a signaling channel.
Measurement point
When a signaling channel (an SDCCH or a TCH for carrying signaling) is seized during a call, this counter is measured in the
following situations:
The BSC receives an ERROR INDICATION message from the BTS because of the abnormal connection on the radio signaling link
layer. For details, refer to GSM Rec. 08.58.
The BSC receives a CONNECTION FAILURE INDICATION message from the BTS because of RSL fault or hardware fault. For
When receiving a DISC frame on a link layer connection in multi-frame mode, the BTS sends a REL IND message to BSC. For
The timer set to wait for an HO CMP message expires during internal intra-cell handover.
The timer set to wait for an HO CMP message expires during outgoing internal inter-cell handover.
The timer set to wait for an HO CMP message expires during outgoing external inter-cell handover.
The timer set to wait for an HO CMP message expires during incoming external inter-cell handover.
The BSC does not receive any measurement report with a certain period (by default, five minutes) and sends a CLEAR REQUEST
message to the MSC to release the call.
A call drop occurs in any of the following situations: TRX mutual aid; dynamic modification of cell attributes, TRX frequencies, or
TRX FH data; dynamic deletion of cells or TRXs; blocking of cells, TRXs, or channels.
The timer set to wait for the outgoing BSC handover command expires, or the clear request message is received from the MSC before
the timer expires.
When the MSC cannot send a short message because of the restriction on sending downlink short messages in data configuration or
because of flow control, this counter is incremented by one and the call is released.
20/11/2015
Page 109 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 110 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 111 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 112 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 113 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel = [Call Drops on Radio Interface in Stable State (Signaling Channel)] + [Call Drops on Radio
Interface in Handover State (Signaling Channel)] + [Call Drops Due to No MR from MS for a Long Time (Signaling Channe)] + [Call
Drops Due to Abis Terrestrial Link Failure (Signaling Channel)] + [Call Drops due to Equipment Failure (Signaling Channel)] + [Call
Drops due to Forced Handover (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.SIG.CALL.DROPS
GBFD-111004

Call Drops on Radio Interface in Stable State (Traffic

Channel)
ID
Counter
Description
1278072502
CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE CM330:Call Drops on Radio

Interface in Stable State (Traffic
Channel)
Description
This measurement provides the number of calls released because of the ERR IND, CONN FAIL IND, and REL IND messages
received by the BSC after the MS seizes a traffic channel.
20/11/2015
Page 114 of 316
Measurement point
z
The BSC receives an ERROR INDICATION message from the BTS because of the abnormal connection on the radio link
The BSC receives a CONNECTION FAILURE INDICATION message from the BTS because of link fault or hardware fault
on the radio link layer. For details, refer to GSM Rec. 08.58.

Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 115 of 316

A5

A6

A7
A8

Successful TCH Seizures on the TRX in the Overlaid Subcell,
Switch
A9
Formula
Call Drops on Radio Interface in Stable State (Traffic Channel) = [Call Drops on Traffic Channel in Stable State (Error Indication)] +
[Call Drops on Traffic Channel in Stable State (Connection Failure)] + [Call Drops on Traffic Channel in Stable State (Release
Indication)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE GBFD-111004
Feature Name
Management

Call Drops on Radio Interface in Handover State (Traffic

Channel)
ID
Counter
Description
1278072503
CELL.TRAF.CH.CALL.DROPS.HO.FAIL CM331:Call Drops on Radio Interface in

Handover State (Traffic Channel)
Description
After the MS seizes the traffic channel, the BSC sends the HO CMD to the MS. During the handover process, this measurement
provides the number of times that the timer for the target cell waiting for the handover completion expires if the MS fails to access the
new channel at the radio interface, or the number of times when the timer for the originating cell waiting for the handover completion
expires if the MS fails to return to the original channel.
Measurement point
z
z
z
20/11/2015
Page 116 of 316
This counter is calculated at A6, as shown in Figure 1 and Figure 2.

Figure 1 Call drops in the intra-BSC handover procedure (including the signaling channel and traffic channel)
Measurement points
Description
A1

A2

A3

A4

Overlaid Subcell, Call Drops Due to Other Causes in Stable State
A5

20/11/2015
Page 117 of 316
A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 118 of 316

Overlaid Subcell, Call Drops Due to Other Causes in Stable State
A5
A6

A9
Formula
Call Drops on Radio Interface in Handover State (Traffic Channel) = [Failed Internal Intra-Cell Handovers (Timer Expired) (TCHF)
(Traffic Channel)] + [Failed Internal Intra-Cell Handovers (Timer Expired) (TCHH) (Traffic Channel)] + [Number of Unsuccessful
Outgoing Internal Inter-Cell Handovers (Timer Expired) (TCHF) (Traffic Channel)] + [Number of Unsuccessful Outgoing Internal
Inter-Cell Handovers (Timer Expired) (TCHH) (Traffic Channel)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry)
(TCHF) (Traffic Channel)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.HO.FAIL GBFD-111004
Feature Name

Call Drops on Signaling Channel in Stable State (Error

Indication)
ID
Counter
Description
1278072504
CELL.SIG.STATIC.STATE.CALL.DROPS.ERR.IND CM3600:Call Drops on Signaling

Channel in Stable State (Error
Indication)
Description
After the MS seizes a channel, the BTS sends the BSC an ERR IND message, indicating that call drops occur on the Um interface
because of the abnormal connection at the radio link layer.
This measurement provides the number of times that the BSC receives an ERR IND message on the signaling channel for releasing a
call. During a call, if multiple ERR IND messages, or a REL IND message or CONN FAIL IND message is received by the BSC after
an ERR IND message, this counter is measured only once.
Measurement point
When an SDCCH or a TCH is seized as a signaling channel during a call, this counter is incremented by one if the BSC receives an
ERR IND message.
Figure 1
20/11/2015
Page 119 of 316
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 120 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 121 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 122 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 123 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 124 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel in Stable State (Error Indication) = [Call Drops due to ERR IND Received on SDCCH in Stable
State (T200 Expired)] + [Call Drops due to ERR IND Received on SDCCH in Stable State (Unsolicited DM Response)] + [Call Drops
due to ERR IND Received on SDCCH in Stable State (Sequence Error)] + [Call Drops due to ERR IND Received on TCHF
(Signaling Channel) in Stable State (T200 Expired)] + [Call Drops due to ERR IND Received on TCHF (Signaling Channel) in Stable
State (Unsolicited DM Response)] + [Call Drops due to ERR IND Received on TCHF (Signaling Channel) in Stable State (Sequence
Error)] + [Call Drops due to ERR IND Received on TCHH (Signaling Channel) in Stable State (T200 Expired)] + [Call Drops due to
ERR IND Received on TCHH (Signaling Channel) in Stable State (Unsolicited DM Response)] + [Call Drops due to ERR IND
Received on TCHH (Signaling Channel) in Stable State (Sequence Error)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.STATIC.STATE.CALL.DROPS.ERR.IND GBFD-111004
Feature Name
Management

Call Drops on Signaling Channel in Stable State (Connection

Failure)
ID
Counter
1278072505
CELL.SIG.STATIC.STATE.CALL.DROPS.CONN.FAIL CM3601:Call Drops on Signaling

Channel in Stable State
(Connection Failure)
Description
20/11/2015
Page 125 of 316
Description
interface because of the abnormal connection at the radio link layer.
This measurement provides the number of times that the BSC receives a CONN FAIL IND message on the signaling channel for
releasing a call. During a call, if multiple CONN FAIL IND messages, or a REL IND message or an ERR IND message is received
after a CONN FAIL IND message is received by the BSC, this counter is measured only once.
Measurement point
When an SDCCH or a TCH is seized to carry signaling during a call, this counter is incremented by one if the BSC receives a CONN
FAIL IND message.
Figure 1
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
20/11/2015
Page 126 of 316
A6

A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 127 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 128 of 316
A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

20/11/2015
Page 129 of 316

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

20/11/2015
Page 130 of 316
A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel in Stable State (Connection Failure) = [Call Drops due to CONN FAIL Received on SDCCH in
Stable State (Radio Link Failure)] + [Call Drops due to CONN FAIL Received on SDCCH in Stable State (HO Access Failure)] +
[Call Drops due to CONN FAIL Received on SDCCH in Stable State (OM Intervention)] + [Call Drops due to CONN FAIL Received
on SDCCH in Stable State (Radio Resource Unavailable)] + [Call Drops due to CONN FAIL Received on SDCCH in Stable State
(Other Causes)] + [Call Drops due to CONN FAIL Received on TCHF (Signaling Channel) in Stable State (Radio Link Failure)] +
[Call Drops due to CONN FAIL Received on TCHF (Signaling Channel) in Stable State (HO Access Failure)] + [Call Drops due to
CONN FAIL Received on TCHF (Signaling Channel) in Stable State (OM Intervention)] + [Call Drops due to CONN FAIL Received
on TCHF (Signaling Channel) in Stable State (Radio Resource Unavailable)] + [Call Drops due to CONN FAIL Received on TCHF
(Signaling Channel) in Stable State (Other Causes)] + [Call Drops due to CONN FAIL Received on TCHH (Signaling Channel) in
Stable State (Radio Link Failure)] + [Call Drops due to CONN FAIL Received on TCHH (Signaling Channel) in Stable State (HO
Access Failure)] + [Call Drops due to CONN FAIL Received on TCHH (Signaling Channel) in Stable State (OM Intervention)] +
[Call Drops due to CONN FAIL Received on TCHH (Signaling Channel) in Stable State (Radio Resource Unavailable)] + [Call
Drops due to CONN FAIL Received on TCHH (Signaling Channel) in Stable State (Other Causes)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.STATIC.STATE.CALL.DROPS.CONN.FAIL GBFD-111004
Feature Name
Management

20/11/2015
Page 131 of 316
Call Drops on Signaling Channel in Stable State (Release

Indication)
ID
Counter
Description
1278072506
CELL.SIG.STATIC.STATE.CALL.DROPS.REL.IND CM3602:Call Drops on Signaling

Channel in Stable State (Release
Indication)
Description
After the MS seizes a channel, the BTS sends the BSC a REL IND message, indicating that call drops occur on the Um interface
This measurement provides the number of times that the BSC receives a REL IND message on the signaling channel for releasing a
call. During a call, if an ERR IND or CONN FAIL IND message is received after a REL IND message, this counter is measured only
once.
Measurement point
When an SDCCH or a TCH is seized to carry signaling during a call, this counter is incremented by one if the BSC receives a REL
IND message.
Figure 1
Measurement points
Description
A1

A2

A3

A4
20/11/2015
Page 132 of 316

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 133 of 316
A4

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1
20/11/2015
Page 134 of 316

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 135 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 136 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 137 of 316
Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel in Stable State (Release Indication) = [Call Drops due to REL IND Received on SDCCH] + [Call
Drops due to REL IND Received on TCHF (Signaling Channel)] + [Call Drops due to REL IND Received on TCHH (Signaling
Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.STATIC.STATE.CALL.DROPS.REL.IND GBFD-111004
Feature Name
Management

Call Drops on Radio Interface (Signaling Channel)

ID
Counter
Description
1278072507
CELL.SIG.UM.CALL.DROPS
CM36C:Call Drops on Radio Interface

(Signaling Channel)
Description
This measurement provides the number of call releases due to connection failure on the radio interface caused by various reasons after
the MS seizes a signaling channel.
Note: the call can be in stable or handover state.
Measurement point
z
z
z
z
z
This counter is calculated at A1, A2, A3, and A6,as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
20/11/2015
Page 138 of 316
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 139 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 140 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 141 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 142 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 143 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Radio Interface (Signaling Channel) = [Call Drops on Radio Interface in Stable State (Signaling Channel)] + [Call
Drops on Radio Interface in Handover State (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.SIG.UM.CALL.DROPS
GBFD-111004

Call Drops Due to No MR from MS for a Long Time

(Signaling Channe)
ID
Counter
Description
1278072508
CELL.SIG.CALL.DROPS.NO.MR
CM362:Call Drops Due to No MR from

MS for a Long Time (Signaling Channe)
Description
After seizing the SDCCH, the MS reports a measurement report to the BSC every 470 ms. After seizing the TCH, the MS reports a
measurement report to the BSC every 480 ms. If the BSC does not receive a measurement report within a certain period (five minutes
by default), the BSC determines that a call drop occurs on the Um interface.
This measurement provides the number of call releases by the BSC because the BSC does not receive any measurement report on the
signaling channel within a certain period.
20/11/2015
Page 144 of 316
Measurement point
When an SDCCH or a TCH is seized to carry signaling during a call, if the BSC does not receive a measurement report within a
certain period (by default, five minutes), then the BSC sends a CLEAR REQUEST message to the MSC to release the call. This
counter is measured when the BSC sends a CLEAR REQUEST message to the MSC. This counter is calculated at A4, as shown in
Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Figure 1
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 145 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 146 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 147 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 148 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 149 of 316

A4

Drops Due to Abis Link Failures in Stable Local SwitchState,
Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops Due to No MR from MS for a Long Time (Signaling Channe) = [Call Drops Due to No MR from MS for a Long Time
(SDCCH)] + [Call Drops Due to No MR from MS for a Long Time (TCHF) (Signaling Channel)] + [Call Drops Due to No MR from
MS for a Long Time (TCHH) (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.SIG.CALL.DROPS.NO.MR
GBFD-111004

Call Drops Due to Abis Terrestrial Link Failure (Signaling

Channel)
ID
Counter
Description
1278072509
CELL.SIG.CALL.DROPS.ABIS.LNK.FAIL CM363:Call Drops Due to Abis

Terrestrial Link Failure (Signaling
Channel)
Description
After the MS seizes a channel, the BSC releases the call if the terrestrial link of the Abis interface seized by the call fails.
This measurement provides the number of call releases by the BSC due to the terrestrial link failure over the Abis interface on the
signaling channel.
20/11/2015
Page 150 of 316
Measurement point
When an SDCCH or a TCH is seized to carry signaling during a call, this counter is measured if the BSC detects a broken RSL and
releases all the calls on the link.
Figure 1
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 151 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 152 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 153 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 154 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 155 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops Due to Abis Terrestrial Link Failure (Signaling Channel) = [Call Drops due to Abis Terrestrial Link Failure (SDCCH)] +
[Call Drops due to Abis Terrestrial Link Failure (TCHF) (Signaling Channel)] + [Call Drops due to Abis Terrestrial Link Failure
(TCHH) (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CALL.DROPS.ABIS.LNK.FAIL GBFD-111004
Feature Name

Call Drops due to Equipment Failure (Signaling Channel)

ID
Counter
Description
1278072510
CELL.SIG.CALL.DROPS.EQUIP.FAIL
CM364:Call Drops due to Equipment

Failure (Signaling Channel)
Description
After the MS seizes a channel, if the status of the BSC internal resources is abnormal, the BSC releases the call that seizes the
abnormal resources.
This measurement provides the number of call releases by the BSC on the signaling channel due to the abnormal state of internal
resources.
Measurement point
20/11/2015
Page 156 of 316
When an SDCCH or a TCH is seized to carry signaling during a call, this counter is measured in the following situations:
z
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 157 of 316
Measurement points
Description
A1

A2

A3

A4

A5

20/11/2015
Page 158 of 316
A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 159 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 160 of 316

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

20/11/2015
Page 161 of 316
A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops due to Equipment Failure (Signaling Channel) = [Call Drops Due to Equipment Failure (SDCCH)] + [Call Drops due to
Equipment Failure (TCHF) (Signaling Channel)] + [Call Drops due to Equipment Failure (TCHH) (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CALL.DROPS.EQUIP.FAIL GBFD-111004
Feature Name

Call Drops due to Forced Handover (Signaling Channel)

ID
Counter
Description
1278072511
CELL.SIG.CALL.DROPS.FORCE.HO
CM365:Call Drops due to Forced

Handover (Signaling Channel)
Description
After the MS seizes a signaling channel, the BSC initiates forced handover in the cases of channel preemption, channel failure,
channel blocking. If the MS fails to handover, the BSC releases the call.
This measurement provides the number of call releases by the BSC on the signaling channel due to forced handover failure.
Measurement point
20/11/2015
Page 162 of 316
When an SDCCH or a TCH is seized to carry signaling during a call, this counter is measured in the following situations:
z
A call drop occurs during the emergency handover due to PDCH assignment, or the handover due to TRX mutual aid,
preemption, or blocking of cells, TRXs, and channels.
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 163 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 164 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 165 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 166 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 167 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops due to Forced Handover (Signaling Channel) = [Call Drops due to Forced Handover (SDCCH)] + [Call Drops due to
Forced Handover (TCHF) (Signaling Channel)] + [Call Drops due to Forced Handover (TCHH) (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CALL.DROPS.FORCE.HO GBFD-111004
Feature Name

Call Drops on Radio Interface (Traffic Channel)

ID
Counter
Description
1278072512
CELL.TRAF.CH.UM.CALL.DROPS
CM33C:Call Drops on Radio Interface

(Traffic Channel)
Description
This measurement provides the number of call releases due to connection failure on the radio interface caused by various reasons after
the MS seizes a traffic channel.
Note: the call can be in stable or handover mode.
Measurement point
20/11/2015
z
z
z
z
Page 168 of 316
The BSC receives a CONNECTION FAILURE INDICATION message from the BTS because of link fault or hardware fault at
The BSC receives a REL IND message from the BTS. Previously, the BTS has received a DISC frame from the MS in the
multi-frame link set-up state. For details, refer to GSM Rec. 08.58.
This counter is calculated at A1, A2, A3 and A6, as shown in Figure 1, Figure 2, Figure 3, and Figure 4.
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 169 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

20/11/2015
Page 170 of 316

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

20/11/2015
Page 171 of 316

A2

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
20/11/2015
Page 172 of 316
A1

A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Radio Interface (Traffic Channel) = [Call Drops on Radio Interface in Stable State (Traffic Channel)] + [Call Drops on
Radio Interface in Handover State (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.TRAF.CH.UM.CALL.DROPS
GBFD-111004

Call Drops on TCH in Stable State (Connection Failure)

ID
Counter
1278072513
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.CONN.FAIL CM3301:Call Drops on Traffic
Description
20/11/2015
Page 173 of 316
Channel in Stable State

(Connection Failure)
Description
After the MS seizes a channel, the BTS sends the BSC a CONN FAIL IND message, indicating that a call drop occurs on the Um
interface because of the abnormal connection on the radio link layer.
This measurement provides the number of times that the BSC receives a CONN FAIL IND message on the traffic channel for
releasing a call. During a call, if multiple CONN FAIL IND messages are received, or if a REL IND or ERR IND message is received
after a CONN FAIL IND message, this counter is measured only once.
Measurement point
When a TCH is seized to carry traffic during a call, this counter is measured when the BSC receives a CONN FAIL IND message.
This counter is calculated at A2, as shown in Figure 1, Figure 2, Figure 3,and Figure 4.
Figure 1
Measurement points
Description
A1

A2

A3

A4
20/11/2015
Page 174 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

20/11/2015
Page 175 of 316

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 176 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 177 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 178 of 316
Switch
A8

A9
A10
Formula
Call Drops on Traffic Channel in Stable State (Connection Failure) = [Call Drops due to CONN FAIL Received on TCHF (Traffic
Channel) in Stable State (Radio Link Failure)] + [Call Drops due to CONN FAIL Received on TCHF (Traffic Channel) in Stable
State (HO Access Failure)] + [Call Drops due to CONN FAIL Received on TCHF (Traffic Channel) in Stable State (OM
Intervention)] + [Call Drops due to CONN FAIL Received on TCHF (Traffic Channel) in Stable State (Radio Resource Unavailable)]
+ [Call Drops due to CONN FAIL Received on TCHF (Traffic Channel) in Stable State (Other Causes)] + [Call Drops due to CONN
FAIL Received on TCHH (Traffic Channel) in Stable State (Radio Link Failure)] + [Call Drops due to CONN FAIL Received on
TCHH (Traffic Channel) in Stable State (HO Access Failure)] + [Call Drops due to CONN FAIL Received on TCHH (Traffic
Channel) in Stable State (OM Intervention)] + [Call Drops due to CONN FAIL Received on TCHH (Traffic Channel) in Stable State
(Radio Resource Unavailable)] + [Call Drops due to CONN FAIL Received on TCHH (Traffic Channel) in Stable State (Other
Causes)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.CONN.FAIL GBFD-111004
Feature Name
Management

Call Drops on TCH in Stable State (Error Indication)

ID
Counter
Description
1278072514
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.ERR.IND CM3300:Call Drops on Traffic

Channel in Stable State (Error
Indication)
Description
After the MS seizes a channel, the BTS sends the BSC an ERR IND message, indicating that a call drop occurs on the Um interface
because of the abnormal connection on the radio link layer.
This measurement provides the number of times that the BSC receives an ERR IND message on the traffic channel for releasing a
call. During a call, if multiple ERR IND messages are received, or if a REL IND or CONN FAIL IND message is received after an
ERR IND message, this counter is measured only once.
Measurement point
When a TCH is seized to carry traffic, this counter is measured when the BSC receives an ERR IND message.
This counter is calculated at A1, as shown in Figure 1, Figure 2, Figure 3,and Figure 4.
20/11/2015
Page 179 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 180 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 181 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 182 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Traffic Channel in Stable State (Error Indication) = [Call Drops due to ERR IND Received on TCHF (Traffic Channel)
in Stable State (T200 Expired)] + [Call Drops due to ERR IND Received on TCHF (Traffic Channel) in Stable State (Unsolicited DM
Response)] + [Call Drops due to ERR IND Received on TCHF (Traffic Channel) in Stable State (Sequence Error)] + [Call Drops due
to ERR IND Received on TCHH (Traffic Channel) in Stable State (T200 Expired)] + [Call Drops due to ERR IND Received on
TCHH (Traffic Channel) in Stable State (Unsolicited DM Response)] + [Call Drops due to ERR IND Received on TCHH (Traffic
Channel) in Stable State (Sequence Error)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.ERR.IND GBFD-111004
Feature Name
Management

Call Drops on Traffic Channel in Stable State (Release

Indication)
ID
Counter
Description
1278072515
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.REL.IND CM3302:Call Drops on Traffic

Channel in Stable State (Release
Indication)
Description
After the MS seizes a channel, the BTS sends the BSC a REL IND message, indicating that call drops occur on the Um interface
This measurement provides the number of times that the BSC receives a REL IND message on the traffic channel for releasing a call.
During a call, if an ERR IND or CONN FAIL IND message is received after a REL IND message, this counter is measured only once.
Measurement point
When a TCH is seized to carry traffic during a call, this counter is incremented by one if the BSC receives a REL IND message.
This counter is calculated at A3, as shown in Figure 1, Figure 2, Figure 3, and Figure 4.
20/11/2015
Page 183 of 316
Figure 1
Measurement points
Description
A1

A2

A3

A4

A5

20/11/2015
Page 184 of 316
A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 185 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 186 of 316

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

20/11/2015
Page 187 of 316
A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Traffic Channel in Stable State (Release Indication) = [Call Drops due to REL IND Received on TCHF (Traffic
Channel)] + [Call Drops due to REL IND Received on TCHH (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.REL.IND GBFD-111004
Feature Name
Management

Call Drops Due to No MR from MS for a Long Time (Traffic

Channel)
ID
Counter
Description
1278072516
CELL.TRAF.CH.CALL.DROPS.NO.MR
CM332:Call Drops Due to No MR from

MS for a Long Time (Traffic Channel)
Description
After seizing an SDCCH, the MS sends a measurement report to the BSC every 470 ms. After seizing a TCH, the MS sends a
measurement report to the BSC every 480 ms. If the BSC does not receive any measurement report within a certain period (five
minutes, by default), it deems that a call drop occurs on the Um interface.
20/11/2015
Page 188 of 316
This measurement provides the number of call releases by the BSC because the BSC does not receive any measurement report on the
traffic channel within a certain period.
Measurement point
This counter is incremented by one when the BSC does not receive any measurement report within a certain period (by default, five
minutes) on the TCH seized by the MS and sends a CLEAR REQUEST message to the MSC to release the call.
Figure 1
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 189 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

20/11/2015
Page 190 of 316
A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

20/11/2015
Page 191 of 316

A2

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
20/11/2015
Page 192 of 316
A1

A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops Due to No MR from MS for a Long Time (Traffic Channel) = [Call Drops Due to No MR from MS for a Long Time
(TCHF) (Traffic Channel)] + [Call Drops Due to No MR from MS for a Long Time (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.NO.MR GBFD-111004
Feature Name

Call Drops due to Abis Terrestrial Link Failure (Traffic

Channel)
ID
Counter
Description
20/11/2015
1278072517
Page 193 of 316
CELL.TRAF.CH.CALL.DROPS.ABIS.LNK.FAIL CM333:Call Drops due to Abis

Terrestrial Link Failure (Traffic
Channel)
Description
If the terrestrial link on the Abis interface seized by the call fails after the MS seizes a channel, the BSC releases the call.
This measurement provides the number of call releases by the BSC due to the terrestrial link failure over the Abis interface on the
traffic channel.
Measurement point
When a TCH is seized to carry traffic during a call, this counter is measured if the BSC detects a broken RSL and releases all the calls
on the link.
Figure 1 Call drops in the assignment and intra-cell handover (TCH handover) procedure
Measurement points
Description
A1

A2

A3

A4
20/11/2015
Page 194 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

20/11/2015
Page 195 of 316

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 196 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 197 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 198 of 316
Switch
A8

A9
A10
Formula
Call Drops due to Abis Terrestrial Link Failure (Traffic Channel) = [Call Drops due to Abis Terrestrial Link Failure (TCHF) (Traffic
Channel)] + [Call Drops due to Abis Terrestrial Link Failure (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.ABIS.LNK.FAIL GBFD-111004
Feature Name
Management

Call Drops due to Equipment Failure (Traffic Channel)

ID
Counter
1278072518
CELL.TRAF.CH.CALL.DROPS.EQUIP.FAIL CM334:Call Drops due to Equipment

Failure (Traffic Channel)
Description
Description
After the MS seizes a channel, if the status of the BSC internal resources is abnormal, the BSC releases the call that seizes the
abnormal resources.
This measurement provides the number of call releases by the BSC on the traffic channel due to an abnormal internal resource status.
Measurement point
z
z
z
20/11/2015
Page 199 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 200 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 201 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 202 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 203 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops due to Equipment Failure (Traffic Channel) = [Call Drops due to Equipment Failure (TCHF) (Traffic Channel)] + [Call
Drops due to Equipment Failure (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.EQUIP.FAIL GBFD-111004
Feature Name

Call Drops due to Forced Handover (Traffic Channel)

ID
Counter
1278072519
CELL.TRAF.CH.CALL.DROPS.FORCE.HO CM335:Call Drops due to Forced

Handover (Traffic Channel)
Description
Description
After the MS seizes a traffic channel, the BSC initiates forced handover in the case of channel preemption, channel failure, or channel
blocking. If the handover of the MS fails, the BSC releases the call.
This measurement provides the number of call releases by the BSC on the traffic channel due to forced handover failure.
Measurement point
20/11/2015
Page 204 of 316
A call drop occurs during the emergency handover because of PDCH assignment, or during the handover caused by TRX
mutual aid, preemption, or blocking of cells, TRXs, and channels.
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 205 of 316
A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 206 of 316
A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

20/11/2015
Page 207 of 316

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

20/11/2015
Page 208 of 316
A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops due to Forced Handover (Traffic Channel) = [Call Drops due to Forced Handover (TCHF) (Traffic Channel)] + [Call
Drops due to Forced Handover (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.TRAF.CH.CALL.DROPS.FORCE.HO GBFD-111004

Call Drops on SDCCH

ID
Counter
Description
1278072520
CELL.SD.CALL.DROPS
CM30:Call Drops on SDCCH
Description
In the immediate assignment procedure and the handover procedure, after the MS accesses the SDCCH assigned by the BSC, the
20/11/2015
Page 209 of 316
procedure fails to be performed due to various reasons. This measurement provides the number of call drops on the SDCCH.
Alternatively, when the MS normally seizes the SDCCH, this measurement provides the number of call drops due to various reasons.
Then the BSC sends the CLEAR REQUEST message to the MSC.
This measurement provides the number of call releases by the BSC on the SDCCH due to various reasons.
Measurement point
When an SDCCH is seized during a call, this counter is measured in the following situations:
z
z
z
z
z
z
z
z
z
z
z
z
A call drop occurs in any of the following situations: TRX mutual aid; dynamic modification of cell attributes, TRX
control, and the call is released.
After seizing a channel, the MS fails to start a local switching due to terrestrial resource request failure, failures on the BTS
side, or timer expiration.
During the handover of the call in the local switching state, the BSC releases the call after receiving a HANDOVER DETECT
message from the BTS and then a HANDOVER FAILURE message from the MS.
When a call is in the BSC or BTS local switching state, if the local switching cannot be proceeded for handover or other
reasons, the BSC restores the call to the common call state. If the restoration fails for terrestrial resource request failure or other
reasons, the BSC releases the call.
This counter is calculated at A1, A2, A3, A4, and A6, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Measurement points
Description
A1

A2
20/11/2015
Page 210 of 316
A3

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

20/11/2015
Page 211 of 316
A2

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 212 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 213 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 214 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 215 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on SDCCH = [Call Drops on Radio Interface (SDCCH)] + [Call Drops Due to No MR from MS for a Long Time
(SDCCH)] + [Call Drops due to Abis Terrestrial Link Failure (SDCCH)] + [Call Drops Due to Equipment Failure (SDCCH)] + [Call
Drops due to Forced Handover (SDCCH)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.SD.CALL.DROPS
GBFD-111004

Call Drops on Radio Interface (SDCCH)

ID
Counter
Description
1278072521
CELL.SD.UM.CALL.DROPS
CM30A:Call Drops on Radio Interface

(SDCCH)
Description
This measurement provides the number of call releases that occur on the radio interface due to various reasons after the MS seizes the
SDCCH.
Measurement point
When an SDCCH is seized during a call, this counter is measured in the following situations:
z
z
z
z
z
The BSC receives a CONNECTION FAILURE INDICATION message from the BTS because of link fault or hardware fault at
This counter is calculated at A1, A2, and A3, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
20/11/2015
Page 216 of 316
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 217 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 218 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 219 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 220 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 221 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Radio Interface (SDCCH) = [Call Drops due to ERR IND Received on SDCCH in Stable State (T200 Expired)] + [Call
Drops due to ERR IND Received on SDCCH in Stable State (Unsolicited DM Response)] + [Call Drops due to ERR IND Received
on SDCCH in Stable State (Sequence Error)] + [Call Drops due to CONN FAIL Received on SDCCH in Stable State (Radio Link
Failure)] + [Call Drops due to CONN FAIL Received on SDCCH in Stable State (HO Access Failure)] + [Call Drops due to CONN
FAIL Received on SDCCH in Stable State (OM Intervention)] + [Call Drops due to CONN FAIL Received on SDCCH in Stable
State (Radio Resource Unavailable)] + [Call Drops due to CONN FAIL Received on SDCCH in Stable State (Other Causes)] + [Call
Drops due to REL IND Received on SDCCH] + [Failed Internal Intra-Cell Handovers (Timer Expired) (SDCCH)] + [Number of
Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired) (SDCCH) (Excluding Directed Retry)] + [Number of
Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired) (Directed Retry)] + [Failed Outgoing External Inter-Cell
Handovers (T8 Expiry) (SDCCH) (Excluding Directed Retry)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry)
(Directed Retry)] + [Failed Incoming External Inter-Cell Handovers (Timer Expired) (SDCCH)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.SD.UM.CALL.DROPS
GBFD-111004

Call Drops after Answer

ID
Counter
Description
1278072523
CELL.CALL.DROPS.AFTER.CONN CM337:Call Drops after Answer
Description
20/11/2015
Page 222 of 316
In the assignment procedure, a call is set up when the BSC receives the CONNECT and the CONNECT ACKNOWLEDGE messages
from the CC layer. In the incoming-BSC handover procedure, a call is set up when the target cell sends a Handover Complete
message to the MSC. In the internal BSC handover process, a call is set up when a HANDOVER PERFORMED message is sent to
the MSC after the MS is handed over to the target cell. The BSC measures this counter when call drop after the assignment procedure
or the handover procedure.
Measurement point
z
When the MS is in normal conversation on the radio channel, the BSC detects a CONNECT or CONNECT ACKNOWLEDGE
message. If an abnormal case for a radio link layer connection occurs, the BTS sends an ERROR INDICATION message to the
BSC. This counter is measured when the BSC receives the ERROR INDICATION message. For details, refer to GSM Rec.
08.58.
When the MS is in normal conversation on the radio channel, the BSC detects a CONNECT or CONNECT ACKNOWLEDGE
message. If a broken radio link connection or hardware fault occurs, the BTS sends a CONNECTION FAILURE INDICATION
message to the BSC. This counter is measured when the BSC receives the CONNECTION FAILURE INDICATION message.
This counter is measured if the timer expires before the BSC receives the CLEAR HANDOVER message from the MSC during
the outgoing BSC handover procedure.
In the intra-BSC handover procedure, if the timer expires before the target cell receives the HANDOVER COMPLETE
message, the target cell sends an Inter Clear message to the originating cell to inform it of the handover failure. This counter is
measured in the originating cell when the Inter Clear message is received.
In the intra-BSC handover procedure, if the timer expires before the target cell receives the HANDOVER COMPLETE
message, the target cell sends an Inter Clear message to the originating cell to inform it of the handover failure. This counter is
measured in the originating cell when the Inter Clear message is received.
During the intra-BSC handover procedure, if the MS returns the original channel because of a handover failure, the originating
cell releases the terrestrial connection and restores the network. This counter is measured if a call drop occurs due to a timeout
or failure occurs in the network restoration.
If the BSC and the MSC supports preemption, the radio resource used by an MS with lower priority may be preempted by an
MS with higher priority, leading to the call drop of the MS with lower priority.
This counter is measured when a broken RSL is detected on the traffic channel on the TRX used.
Measurement points
Description
A1

20/11/2015
Page 223 of 316

A2

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 224 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 225 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 226 of 316

Stable State
A5
A6

A9
A1

A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops after Answer = [Call Drops after Answer (TCHF) (Traffic Channel)] + [Call Drops after Answer (TCHH) (Traffic
Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.AFTER.CONN
GBFD-111004
20/11/2015
Page 227 of 316

ID
Counter
Description
1278072524
CELL.CONN
CM338:Successful Connections
Description
This measurement provides the number of successful connections in the CS service. In the immediate assignment procedure, after
establishing the MM connection, the calling MS sends a SETUP message to the BTS to request a call setup if a CC connection is
required. Then the MSC returns a CALL PROCESSING message and pages the called MS. After establishing the MM connection
with the called MS, the MSC sends a SETUP message to the called MS to establish the CC connection. If the called MS permits the
call setup, the called MS responds with a CALL CONFIRMED message. After seizing a TCH, the called MS sends an ALERTING
message to the MSC. Then, the MSC sends the ALERTING message to the calling MS. After the called MS answers, it sends a
CONNECT message to the calling MS. The calling MS responds with a CONNECT ACKNOWLEDGE message. Then the call is
successfully established and enters the conversation state.
This counter provides the number of CONNECT ACKNOWLEDGE messages received.
Measurement point
This counter is measured when the BSC detects a CONNECT ACKNOWLEDGE message.
Measurement points
Description
A1

20/11/2015
Page 228 of 316

A2

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 229 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 230 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 231 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 232 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Successful Connections = [Successful Connections (TCHF) (Traffic Channel)] + [Successful Connections (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CONN
GBFD-110501 Call Control

Clear Requests Sent on the A interface (TCH) (Signaling

Channel)
ID
Counter
Description
1278072525
CELL.A.CLR.REQ.TCH.SIG
CM369:Clear Requests Sent on the A

interface (TCH) (Signaling Channel)
Description
After the MS seizes a TCH to carry signaling, the BSC sends a CLEAR REQ message to the MSC if the BSC releases a call due to
various causes. This measurement provides number of clear requests sent on the A interface when the channel type is TCHF or TCHH
and the service type is signaling channel.
Measurement point
When a TCH is seized as a signaling channel during a call, this counter is measured when the BSC sends a CLEAR REQ message to
the MSC.
This counter is calculated at A5, as shown in Figure 1.
20/11/2015
Page 233 of 316
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
Formula
Clear Requests Sent on the A interface (TCH) (Signaling Channel) = [Clear Requests Sent on the A Interface (TCHF) (Signaling
Channel)] + [Clear Requests Sent on the A Interface (TCHH) (Signaling Channel)]
Unit
None
Related Features
20/11/2015
Counter
Feature ID
Page 234 of 316
Feature Name
CELL.A.CLR.REQ.TCH.SIG GBFD-110501
Call Control

Clear Requests Sent on A interface in Stable State (TCH)

(Traffic Channel) Measurement Counter
ID
Counter
Description
1278072526
CELL.A.CLR.REQ.TCH.TRAF.STATIC
CM339A:Clear Requests Sent on A

interface in Stable State (TCH) (Traffic
Channel)
Description
After the MS seizes a TCH to carry traffic, the BSC sends a CLEAR REQ message to the MSC if the BSC releases a call due to
various causes.
This measurement provides number of clear requests sent on the A interface when the channel type is TCHF or TCHH, the service
type is traffic channel, and the call is in stable state.
Measurement point
When a TCH is seized to carry traffic during a call, and the call is in stable state, this counter is measured when the BSC sends a
CLEAR REQ message to the MSC.
This counter is calculated at A5, as shown in Figure 1.
20/11/2015
Page 235 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6

A7
A8

Successful TCH Seizures on the TRX in the Overlaid Subcell,
Switch
A9
Formula
Clear Requests Sent on A interface in Stable State (TCH) (Traffic Channel) = [Clear Requests Sent on the A Interface (TCHF)
(Traffic Channel) (Stable State)]+[Clear Requests Sent on the A Interface in Stable State (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.A.CLR.REQ.TCH.TRAF.STATIC GBFD-110501
Feature Name
Call Control

Clear Requests Sent on the A interface in Handover State

(TCH) (Traffic Channel)
20/11/2015
Page 236 of 316
ID
Counter
Description
1278072527
CELL.A.CLR.REQ.TCH.TRAF.HO
CM339B:Clear Requests Sent on the A

interface in Handover State (TCH) (Traffic
Channel)
Description
After the MS seizes a TCH to carry traffic, the BSC sends a CLEAR REQ message to the MSC if the BSC releases a call due to
various causes.
This measurement provides number of clear requests sent on the A interface when the channel type is TCHF or TCHH, the service
type is traffic channel, and the call is in handover state.
Measurement point
When a TCH is seized to carry traffic during a call, and the call is in handover state, this counter is measured when the BSC sends a
CLEAR REQ message to the MSC.
Measurement points
Description
A1

A2

A3

20/11/2015
Page 237 of 316

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

A3
20/11/2015
Page 238 of 316

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 239 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 240 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 241 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 242 of 316
Switch
A8

A9
A10
Formula
Clear Requests Sent on the A interface in Handover State (TCH) (Traffic Channel) = [Clear Requests Sent on the A Interface in
Handover State (TCHF) (Traffic Channel)] + [Clear Requests Sent on the A Interface in Handover State (TCHH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.A.CLR.REQ.TCH.TRAF.HO GBFD-110501
Feature Name
Call Control
GBFD-110601
HUAWEI I Handover
GBFD-510501
HUAWEI II Handover

Clear Requests Sent on the A interface (TCH) (Traffic

Channel)
ID
Counter
Description
1278072528
CELL.A.CLR.REQ.TCH.TRAF
CM339:Clear Requests Sent on the A

interface (TCH) (Traffic Channel)
Description
After the MS seizes a traffic channel, in case of any call release is caused, the BSC sends a CLEAR REQ message to the MSC,
regardless of whether the call is in the stable or handover state.
This measurement provides number of clear requests sent on the TCHFs or TCHHs used to carry traffic over the A interface.
Measurement point
When the a TCH is seized to carry signaling during a call, this counter is incremented by one when the BSC sends a CLEAR REQ
message to the MSC.
20/11/2015
Page 243 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 244 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 245 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 246 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 247 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Clear Requests Sent on the A interface (TCH) (Traffic Channel) = [Clear Requests Sent on A interface in Stable State (TCH) (Traffic
Channel)] + [Clear Requests Sent on the A interface in Handover State (TCH) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.A.CLR.REQ.TCH.TRAF GBFD-110501
Feature Name
Call Control

Measurement of Call Drops due to Resource Check

ID
Counter
Description
1278072557
CELL.CALL.DROPS.RES.CHECK.SIG.ULCELL
M3614C:Call Drops Due to Resource

Check on the TRX in the Underlaid
1278072558
CELL.CALL.DROPS.RES.CHECK.TRAF.ULCELL M3314D:Call Drops Due to Resource

Check on the TRX in the Underlaid
1278072588
CELL.CALL.DROPS.RES.CHECK.SIG.OLCELL
1278072589
CELL.CALL.DROPS.RES.CHECK.TRAF.OLCELL M3324D:Call Drops Due to Resource

Check on the TRX in the Overlaid
M3624C:Call Drops Due to Resource

Check on the TRX in the Overlaid
20/11/2015
Page 248 of 316

Description
After the MS seizes a channel, the call may be released because of the inconsistency in the check for the internal resources of the
BSC. Then, this measurement provides the number of call drops related to resource check on the basis of the concentric attribute
(overlaid subcell or underlaid subcell).
Measurement point
The specific counter is measured when a call is released because of the inconsistency in the check for the internal resources of the
BSC.
Figure 1
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
20/11/2015
Page 249 of 316
A6

A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 250 of 316

State
A5

A6

A7
A8

switching
A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 251 of 316

A4

Stable State
A5

A6

A7

switching
A8

A9
A10
Measurement points
Description
A1

A2

20/11/2015
Page 252 of 316

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

20/11/2015
Page 253 of 316
A2

A3

A4

Stable State
A5
A6

A7

switching
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.CALL.DROPS.RES.CHECK.SIG.ULCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.RES.CHECK.TRAF.ULCELL GBFD-113201
Concentric Cell
CELL.CALL.DROPS.RES.CHECK.SIG.OLCELL
GBFD-113201
Concentric Cell
CELL.CALL.DROPS.RES.CHECK.TRAF.OLCELL GBFD-113201
Concentric Cell

Call Drops on the Signaling Channels on the TRX in the

Underlaid Subcell
ID
Counter
Description
20/11/2015
1278072560
Page 254 of 316
CELL.SIG.STATIC.STATE.CALL.DROPS.ULCELL CM361A:Call Drops on the

Signaling Channels on the TRX in
the Underlaid Subcell
Description
This measurement provides the number of abnormal call releases due to various reasons after the MS seizes a signaling channel
carried on the TRX in the underlaid subcell.
Measurement point
When a signaling channel carried on the TRX in the underlaid subcell is seized during a call, this counter is measured in the following
situations:
z
z
z
z
z
z
z
z
z
z
z
z
The call is released because inconsistency is found in checking the internal resources of the BSC.
This counter is calculated at A1, A2, A3, and A4, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Measurement points
Description
A1

A2

20/11/2015
Page 255 of 316

A3

A4

Subcell
A5
A6

A10
Measurement points
Description
A1

20/11/2015
Page 256 of 316
A2

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 257 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 258 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 259 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 260 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on the Signaling Channels on the TRX in the Underlaid Subcell = [Call Drops Due to the ERR IND Received from the
Signaling Channel on the TRX in the Underlaid Subcell in Stable State (T200 Expired)] + [Call Drops Due to the ERR IND Received
from the Traffic Channel on the TRX in the Underlaid Subcell in Stable State (Unsolicited DM Response)] + [Call Drops Due to the
ERR IND Received from the Signaling Channel on the TRX in the Underlaid Subcell in Stable State (Sequence Error)] + [Call Drops
Due to the CONN FAIL Received from the Signaling Channel on the TRX in the Underlaid Subcell in Stable State (Radio Link
Failure)] + [Call Drops Due to the CONN FAIL Received from the Signaling Channel on the TRX in the Underlaid Subcell in Stable
State (HO Access Failure)] + [Call Drops Due to the CONN FAIL Received from the Signaling Channel on the TRX in the Underlaid
Subcell in Stable State (OM Intervention)] + [Call Drops Due to the CONN FAIL Received from the Signaling Channel on the TRX
in the Underlaid Subcell in Stable State (Radio Resource Not Available)] + [Call Drops Due to the CONN FAIL Received from the
Signaling Channel on the TRX in the Underlaid Subcell in Stable State (Others)] + [Call Drops Due to the REL IND Received from
the Signaling Channel on the TRX in the Underlaid Subcell in Stable State] + [Call Drops Due to No MR from the MS on the
Signaling Channel on the TRX in the Underlaid Subcell] + [Call Drops Due to Abis Terrestrial Link Failure on the TRX in the
Underlaid Subcell (Signaling Channel)] + [Call Drops Due to TRX Failure in the Underlaid Subcell (Signaling Channel)] + [Call
Drops Due to Forced Handover on the TRX in the Underlaid Subcell (Signaling Channel)] + [Call Drops Due to Resource Check on
the TRX in the Underlaid Subcell (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.STATIC.STATE.CALL.DROPS.ULCELL GBFD-113201
Feature Name
Concentric Cell

Call Drops on the Traffic Channels on the TRX in the

Underlaid Subcell
ID
Counter
1278072561
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.ULCELL CM330A:Call Drops on the

Traffic Channels on the TRX in
the Underlaid Subcell
Description
Description
This measurement provides the number of abnormal call releases due to various reasons after the MS seizes the TCH on the TRX in
the underlaid subcell.
Measurement point
20/11/2015
Page 261 of 316
When a traffic channel on the TRX in the underlaid subcell is seized during a call, this counter is measured in the following situations:
z
z
z
z
z
z
z
z
z
z
z
z
The BSC does not receive any measurement report within a certain period (by default, five minutes) and then sends a CLEAR
When the MSC cannot send a short message because of the restriction on sending downlink short messages in data
configuration or because of flow control, this counter is incremented by one and the call is released.
The call is released due to the inconsistency in the check for the internal resources of the BSC.
Measurement points
Description
A1

A2

20/11/2015
Page 262 of 316

A3

A4

A5

A6

A7
A8

Switch
A9
20/11/2015
Page 263 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5

A6
20/11/2015
Page 264 of 316

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 265 of 316

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 266 of 316

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on the Traffic Channels on the TRX in the Underlaid Subcell = [Call Drops Due to the ERR IND Received from the
Traffic Channel on the TRX in the Underlaid Subcell in Stable State (T200 Expired)] + [Call Drops Due to the ERR IND Received
from the Traffic Channel on the TRX in the Underlaid Subcell in Stable State (Unsolicited DM Response)] + [Call Drops Due to the
ERR IND Received from the Traffic Channel on the TRX in the Underlaid Subcell in Stable State (Sequence Error)] + [Call Drops
Due to the CONN FAIL Received from the Traffic Channel on the TRX in the Underlaid Subcell in Stable State (Radio Link Failure)]
+ [Call Drops Due to the CONN FAIL Received from the Traffic Channel on the TRX in the Underlaid Subcell in Stable State (HO
Access Failure)] + [Call Drops Due to the CONN FAIL Received from the Traffic Channel on the TRX in the Underlaid Subcell in
Stable State (OM Intervention)] + [Call Drops Due to the CONN FAIL Received from the Traffic Channel on the TRX in the
Underlaid Subcell in Stable State (Radio Resource Not Available)] + [Call Drops Due to the CONN FAIL Received from the Traffic
Channel on the TRX in the Underlaid Subcell in Stable State (Others)] + [Call Drops Due to the REL IND Received from the Traffic
Channel on the TRX in the Underlaid Subcell in Stable State] + [Call Drops Due to No MR from the MS on the Traffic Channel on
the TRX in the Underlaid Subcell] + [Call Drops Due to Abis Terrestrial Link Failure on the TRX in the Underlaid Subcell (Traffic
Channel)] + [Call Drops Due to TRX Failure in the Underlaid Subcell (Traffic Channel)] + [Call Drops Due to Forced Handover on
the TRX in the Underlaid Subcell (Traffic Channel)] + [Call Drops Due to Resource Check on the TRX in the Underlaid Subcell
(Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.ULCELL GBFD-113201
Feature Name
Concentric Cell

Call Drops on the Signaling Channels on the TRX in the

Overlaid Subcell
ID
Counter
1278072591
CELL.SIG.STATIC.STATE.CALL.DROPS.OLCELL CM360A:Call Drops on the

Signaling Channels on the TRX in
the Overlaid Subcell
Description
Description
This measurement provides the number of abnormal call releases due to various reasons after the MS seizes a signaling channel on the
TRX in the overlaid subcell.
Measurement point
20/11/2015
Page 267 of 316
When a signaling channel carried on the TRX in the overlaid subcell is seized during a call, this counter is measured in the following
situations:
z
z
z
z
z
z
z
z
z
z
z
z
The BSC receives an REL IND message from the BTS. Previously, the BTS has received a DISC frame from the MS in the
multi-frame link set-up state. For details, refer to GSM Rec. 08.58.
A call drop occurs due to any of the following situations: TRX mutual aid; dynamic modification of cell attributes, TRX
A call drop occurs due to call assignment failure during the handover.
A call drop occurs due to software error.
The call is released due to the inconsistency in the check for the internal resources of the BSC.
This counter is calculated at A1, A2, A3, and A4, as shown in Figure 1, Figure 2, Figure 3, Figure 4, and Figure 5.
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 268 of 316

Subcell
A5
A6

A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 269 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

20/11/2015
Page 270 of 316

A2

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
20/11/2015
Page 271 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A9
20/11/2015
Page 272 of 316
Measurement points
Description
A1

A2

A3

A4

Stable State
A5
A6

A7
20/11/2015
Page 273 of 316
Switch
A8

A9
A10
Formula
Call Drops on the Signaling Channels on the TRX in the Overlaid Subcell = [Call Drops Due to ERR IND Received from the
Signaling Channel on the TRX in the Overlaid Subcell in Stable State (T200 Expired)] + [Call Drops Due to ERR IND Received from
the Signaling Channel on the TRX in the Overlaid Subcell in Stable State (Unsolicited DM Response)] + [Call Drops Due to ERR
IND Received from the Signaling Channel on the TRX in the Overlaid Subcell in Stable State (Sequence Error)] + [Call Drops Due to
CONN FAIL Received from the Signaling Channel on the TRX in the Overlaid Subcell in Stable State (Radio Link Failure)] + [Call
Drops Due to CONN FAIL Received from the Signaling Channel on the TRX in the Overlaid Subcell in Stable State (HO Access
Failure)] + [Call Drops Due to CONN FAIL Received from the Signaling Channel on the TRX in the Overlaid Subcell in Stable State
(OM Intervention)] + [Call Drops Due to CONN FAIL Received from the Signaling Channel on the TRX in the Overlaid Subcell in
Stable State (Radio Resource Not Available)] + [Call Drops Due to CONN FAIL Received from the Signaling Channel on the TRX in
the Overlaid Subcell in Stable State (Others)] + [Call Drops Due to the REL IND Received from the Signaling Channel on the TRX in
the Overlaid Subcell in Stable State] + [Call Drops Due to No MR from the MS on the Signaling Channel on the TRX in the Overlaid
Subcell] + [Call Drops Due to Abis Terrestrial Link Failure on the TRX in the Overlaid Subcell (Signaling Channel)] + [Call Drops
Due to TRX Failure in the Overlaid Subcell (Signaling Channel)] + [Call Drops Due to Forced Handover on the TRX in the Overlaid
Subcell (Signaling Channel)] + [Call Drops Due to Resource Check on the TRX in the Overlaid Subcell (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.STATIC.STATE.CALL.DROPS.OLCELL GBFD-113201
Feature Name
Concentric Cell

Call Drops on the Traffic Channels on the TRX in the

Overlaid Subcell
ID
Counter
1278072592
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.OLCELL CM330B:Call Drops on the

Traffic Channels on the TRX in
the Overlaid Subcell
Description
Description
This measurement provides the number of abnormal call releases due to various reasons after the MS seizes the TCH on the TRX in
the overlaid subcell.
Measurement point
When a TCH on the TRX in the overlaid subcell is seized during a call, this counter is measured in the following situations:
z
z
z
z
z
z
The BSC does not receive any measurement report within a certain period (by default, five minutes) and then sends a CLEAR
20/11/2015
z
z
z
z
z
z
Page 274 of 316
When the MSC cannot send a short message because of the restriction on sending downlink short messages in data
configuration or because of flow control, this counter is incremented by one and the call is released.
The call is released because of the inconsistency in the check for the internal resources of the BSC.
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 275 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

20/11/2015
Page 276 of 316

A3

A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

20/11/2015
Page 277 of 316

A2

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
20/11/2015
Page 278 of 316
A1

A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on the Traffic Channels on the TRX in the Overlaid Subcell = [Call Drops Due to ERR IND Received from the Traffic
Channel on the TRX in the Overlaid Subcell in Stable State (T200 Expired)] + [Call Drops Due to ERR IND Received from the
Traffic Channel on the TRX in the Overlaid Subcell in Stable State (Unsolicited DM Response)] + [Call Drops Due to ERR IND
Received from the Traffic Channel on the TRX in the Overlaid Subcell in Stable State (Sequence Error)] + [Call Drops Due to CONN
FAIL Received from the Traffic Channel on the TRX in the Overlaid Subcell in Stable State (Radio Link Failure)] + [Call Drops Due
to CONN FAIL Received from the Traffic Channel on the TRX in the Overlaid Subcell in Stable State (HO Access Failure)] + [Call
Drops Due to CONN FAIL Received from the Traffic Channel on the TRX in the Overlaid Subcell in Stable State (OM Intervention)]
+ [Call Drops Due to CONN FAIL Received from the Traffic Channel on the TRX in the Overlaid Subcell in Stable State (Radio
Resource Not Available)] + [Call Drops Due to CONN FAIL Received from the Traffic Channel on the TRX in the Overlaid Subcell
in Stable State (Others)] + [Call Drops Due to the REL IND Received from the Traffic Channel on the TRX in the Overlaid Subcell in
Stable State] + [Call Drops Due to No MR from the MS on the Traffic Channel on the TRX in the Overlaid Subcell] + [Call Drops
Due to Abis Terrestrial Link Failure on the TRX in the Overlaid Subcell (Traffic Channel)] + [Call Drops Due to TRX Failure in the
Overlaid Subcell (Traffic Channel)] + [Call Drops Due to Forced Handover on the TRX in the Overlaid Subcell (Traffic Channel)] +
[Call Drops Due to Resource Check on the TRX in the Overlaid Subcell (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.STATIC.STATE.CALL.DROPS.OLCELL GBFD-113201
Feature Name
Concentric Cell
20/11/2015
Page 279 of 316

Call Drop Rate on SDCCH

ID
Counter
Description
1278072593
CELL.SD.CALL.DROP
ZTR104C:Call Drop Rate on SDCCH
Description
This Item measures the rate of the number of call drops on the SDCCH to the number of successful SDCCH requests.In the immediate
assignment procedure and the handover procedure, after the MS accesses the SDCCH assigned by the BSC, the procedure fails to be
performed due to various reasons.
Measurement point
See measurement points of the counters in the formula.
Formula
Call Drop Rate on SDCCH = [ Call Drops on SDCCH]x{100}/[Successful SDCCH Seizures]
Unit
per cent
Related Features
Counter
Feature ID
Feature Name
CELL.SD.CALL.DROP
GBFD-111004

Call Drop Rate on TCH per cell (Including Handover)

ID
Counter
Description
1278072594
CELL.RATE.TCH.CALL.DROP.INCLUDE.HO ZTR304:Call Drop Rate on TCH per

cell(including Handover)
Description
This measurement provides the rate of TCH call drops (including handover) to successful TCH seizures (including handover).
Note:
The TCH call drop rate (including handover) focuses on the channel, whereas the TCH call drop rate (excluding handover) focuses on
the end-user perception.
The TCH call drop rate (including handover) is the call drop probability measured based on the channel resource occupancy. During a
call, the number of channel occupancies is equal to the number of handovers happened. If call drop occurs after only one handover,
then the channel occupancy of other handovers during the call is regarded as successful.
The TCH call drop rate (excluding handover) is the call drop probability measured for one call. The TCH occupancy of a call is
regarded as unsuccessful as long as call drop occurs, without considering how many handovers happen during the call.
Measurement point
Formula
20/11/2015
Page 280 of 316
Call Drop Rate on TCH per cell(including Handover) = [Call Drops on Traffic Channel] * {100}/([Successful TCH Seizures
(Signaling Channel)] + [Successful TCH Seizures (Traffic Channel)] + [Successful TCH Seizures in TCH handovers (Traffic
Channel)])
Unit
per cent
Related Features
Counter
Feature ID
Feature Name
CELL.RATE.TCH.CALL.DROP.INCLUDE.HO GBFD-111004

Call Drop Rate on TCH per cell(Excluding Handover)

ID
Counter
Description
1278072595
CELL.RATE.TCH.CALL.DROP.EXCLUDE.HO ZTR304A:Call Drop Rate on TCH per

cell(Excluding Handover)
Description
This measurement provides the rate of TCH call drops (excluding handover) to successful TCH seizures (excluding handover).
Measurement point
Formula
Call Drop Rate on TCH per cell(Excluding Handover) = [Call Drops on Traffic Channel]*{100}/([Successful TCH Seizures (Traffic
Channel)]+[Number of Incoming Internal Inter-Cell Handover Requests (TCH)]-[Number of Unsuccessful Incoming Internal InterCell Handovers(TCH)]+[Number of Incoming External Inter-Cell Handover Requests(TCH)]-[Number of Unsuccessful Incoming
External Inter-Cell Handovers(TCH)]-([Number of Outgoing Internal Inter-Cell Handover Requests(TCH)]-[Number of Unsuccessful
Outgoing Internal Inter-Cell Handovers(TCH)]+[Outgoing External Inter-Cell Handover Requests(TCH)]-[Failed Outgoing External
Inter-Cell Handovers(TCH)]))
Unit
per cent
Related Features
Counter
Feature ID
Feature Name
CELL.RATE.TCH.CALL.DROP.EXCLUDE.HO GBFD-111004

Radio Drop Rate of TCH

ID
Counter
Description
1278072596
CELL.TCH.RD.DROP
RM333:Radio Drop Rate of TCH
Description
This measurement provides the rate of call drops due to radio link failure.
Measurement point
20/11/2015
Page 281 of 316

Formula
Radio Drop Rate of TCH = ([Call Drops on Radio Interface in Stable State (Traffic Channel)] + [Call Drops on Radio Interface in
Stable State (Signaling Channel)(TCH)]) * {100} / (Successful TCH Seizures (Signaling Channel)] + [Successful TCH Seizures
(Traffic Channel)] + [Successful TCH Seizures in TCH handovers (Traffic Channel)])
Unit
per cent
Related Features
Counter
Feature ID
Feature Name
CELL.TCH.RD.DROP GBFD-110501
Call Control

Call Drop Rate on TCHH per cell

ID
Counter
Description
1278072623
CELL.RATE.TCHH.CALL.DROP
RM327:Call Drop Rate on TCHH per cell
Description
This measurement provides the rate of call drops on the TCHH due to any cause to successful TCHH seizures.
Measurement point
Formula
Call Drop Rate on TCHH per cell = [Call Drops on Traffic Channel (TCHH)]x{100} / ([Successful TCH Seizures (Signaling
Channel) (TCHH)]+ [Successful TCH Seizures (Traffic Channel) (TCHH)]+ [Successful TCH Seizures in TCH Handovers (Traffic
Channel) (TCHH)])
Unit
per cent
Related Features
Counter
Feature ID
CELL.RATE.TCHH.CALL.DROP GBFD-113401
Feature Name
Half Rate Speech

Call Drop Rate on TCHF per cell

ID
Counter
Description
1278072624
CELL.RATE.TCHF.CALL.DROP
RM317:Call Drop Rate on TCHF per cell
Description
This measurement provides the rate of call drops on the TCHF due to any cause to successful TCHF seizures.
Measurement point
20/11/2015
Page 282 of 316

Formula
Call Drop Rate on TCHF per cell = [Call Drops on Traffic Channel (TCHF)] x {100} / ([Successful TCH Seizures (Signaling
Channel) (TCHF)] + [Successful TCH Seizures (Traffic Channel) (TCHF)] + [Successful TCH Seizures in TCH Handovers (Traffic
Channel) (TCHF)])
Unit
per cent
Related Features
Counter
Feature ID
Feature Name
CELL.RATE.TCHF.CALL.DROP
GBFD-111004

Successful TCH Seizures on the TRX in the UnderLaid Subcell

ID
Counter
Description
1278072625
CELL.CALL.TCH.SUCC.UNDERLAY
M338:Successful TCH Seizures on the

TRX in the Underlaid Subcell
Description
This measurement provides the number of successful seizures of the TCH carried on the TRX in the underlaid subcell of a concentric
cell.
Measurement point
In the assignment procedure, if the TRX is in the underlaid subcell of a concentric cell and the call seizes a TCH, this counter is
calculated when the BSC sends an ASS CMP message to the MSC, including directly retry and mode modification.
In the handover procedure, if the TRX is in the underlaid subcell of a concentric cell and the call seizes a TCH, this counter is
calculated when the BSC receives an HO CMP message from the MS.
20/11/2015
Page 283 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 284 of 316

A7
A8

Switch
A9
Figure 2 Call drops in the into-cell handover procedure (including the signaling channel and traffic channel)
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 285 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
CELL.CALL.TCH.SUCC.UNDERLAY GBFD-113201
Feature Name
Concentric Cell

Successful TCH Seizures on the TRX in the Overlaid Subcell

ID
Counter
Description
1278072626
CELL.CALL.TCH.SUCC.OVERLAY
M338a:Successful TCH Seizures on the

TRX in the OverLaid Subcell
Description
This measurement provides the number of successful seizures of the TCH carried on the TRX in the overlaid subcell of a concentric
cell.
Measurement point
In the assignment procedure, if the TRX is in the underlaid subcell of a concentric cell and the call seizes a TCH, this counter is
calculated when the BSC sends an ASS CMP message to the MSC, including directly retry and mode modification.
In the handover procedure, if the TRX is in the underlaid subcell of a concentric cell and the call seizes a TCH, this counter is
calculated when the BSC receives an HO CMP message from the MS.
20/11/2015
Page 286 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 287 of 316

A7
A8

Switch
A9
Figure 2 Call drops in the into-cell handover procedure (including the signaling channel and traffic channel)
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 288 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Formula
None
Unit
None
Related Features
Counter
Feature ID
CELL.CALL.TCH.SUCC.OVERLAY GBFD-113201
Feature Name
Concentric Cell

Call Drop Rate on TCH on the TRX in the Underlaid Subcell

ID
Counter
1278072627
CELL.RATE.TCH.CALL.DROP.UNDERLAY RM330:Call Drop Rate on TCH on the

TRX in the Underlaid Subcell
Description
Description
This measurement provides the rate of Call Drops on the Traffic Channels on the TRX in the Underlaid Subcell due to any cause to
Successful TCH Seizures on the TRX in the UnderLaid Subcell.
Measurement point
Formula
Call Drop Rate on TCH on the TRX in the Underlaid Subcell = [Call Drops on the Traffic Channels on the TRX in the Underlaid
Subcell] * {100}/ [Successful TCH Seizures on the TRX in the Underlaid Subcell]
Unit
20/11/2015
Page 289 of 316
per cent
Related Features
Counter
Feature ID
CELL.RATE.TCH.CALL.DROP.UNDERLAY GBFD-113201
Feature Name
Concentric Cell

Call Drop Rate on TCH on the TRX in the OverLaid Subcell

ID
Counter
Description
1278072628
CELL.RATE.TCH.CALL.DROP.OVERLAY RM330a:Call Drop Rate on TCH on the

TRX in the OverLaid Subcell
Description
This measurement provides the rate of Call Drops on the Traffic Channels on the TRX in the Overlaid Subcell due to any cause to
Successful TCH Seizures on the TRX in the OverLaid Subcell.
Measurement point
Formula
Call Drop Rate on TCH on the TRX in the OverLaid Subcell = [Call Drops on the Traffic Channels on the TRX in the Overlaid
Subcell] * {100}/ [Successful TCH Seizures on the TRX in the OverLaid Subcell]
Unit
per cent
Related Features
Counter
Feature ID
CELL.RATE.TCH.CALL.DROP.OVERLAY GBFD-113201
Feature Name
Concentric Cell

Call Drops on Signaling Channel in Stable State (Error

Indication) (TCH)
ID
Counter
Description
1278072629
CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.ERR.IND CM3603:Call Drops on

Signaling Channel in
Stable State (Error
Indication) (TCH)
Description
After the MS seizes a channel, the BTS sends the BSC an ERR IND message, indicating that a call drop occurs on the Um interface
because of the abnormal connection on the radio link layer.
This counter provides the number of times that the BSC receives the ERR IND messages and releases calls after the MS seizes the
TCH for carrying signaling. During a call, if multiple ERR IND messages are received, or a REL IND or CONN FAIL IND message
is received after an ERR IND message, this counter is measured only once.
Measurement point
20/11/2015
Page 290 of 316
When a TCH is seized to carry signaling during a call, this counter is measured when the BSC receives an ERR IND message.
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

A10
20/11/2015
Page 291 of 316
Measurement points
Description
A1

A2

A3

A4

A5

A6
20/11/2015
Page 292 of 316

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 293 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

A3

20/11/2015
Page 294 of 316
A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 295 of 316

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel in Stable State (Error Indication) (TCH) = [Call Drops due to ERR IND Received on TCHF
(Signaling Channel) in Stable State (T200 Expired)] + [Call Drops due to ERR IND Received on TCHF (Signaling Channel) in Stable
State (Unsolicited DM Response)] + [Call Drops due to ERR IND Received on TCHF (Signaling Channel) in Stable State (Sequence
Error)] + [Call Drops due to ERR IND Received on TCHH (Signaling Channel) in Stable State (T200 Expired)] + [Call Drops due to
ERR IND Received on TCHH (Signaling Channel) in Stable State (Unsolicited DM Response)] + [Call Drops due to ERR IND
Received on TCHH (Signaling Channel) in Stable State (Sequence Error)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.ERR.IND GBFD-111004
Feature Name
Management

Call Drops on Signaling Channel in Stable State (Release

Indication) (TCH)
ID
Counter
Description
1278072630
CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.REL.IND CM3604:Call Drops on

Stable State (Release
Indication) (TCH)
Description
20/11/2015
Page 296 of 316
After the MS seizes a channel, the BTS sends the BSC an REL IND message, indicating that call drops occur on the Um interface
This counter provides the number of times that the BSC receives an REL IND message and releases the call after the MS seizes the
TCH for the signaling services. This counter is incremented by one when the BSC receives an REL IND message during a call,
irrespective of whether a CONN FAIL IND message or an ERR IND message is received afterwards.
Measurement point
When a TCH is seized as a signaling channel during a call, this counter is incremented by one if the BSC receives an REL IND
message.
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
A6

20/11/2015
Page 297 of 316

A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 298 of 316
A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 299 of 316

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

20/11/2015
Page 300 of 316
A3

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

A2

20/11/2015
Page 301 of 316

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel in Stable State (Release Indication) (TCH) = [Call Drops due to REL IND Received on TCHF
(Signaling Channel)] + [Call Drops due to REL IND Received on TCHH (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.REL.IND GBFD-111004
Feature Name
Management

Call Drops on Signaling Channel in Stable State (Connection

Failure) (TCH)
ID
Counter
1278072631
CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.CONN.FAIL CM3605:Call Drops on

Stable State (Connection
Failure) (TCH)
Description
20/11/2015
Page 302 of 316
Description
interface because of the abnormal connection at the radio link layer.
This counter provides the number of times that the BSC receives a CONN FAIL IND message for releasing a call after the MS seizes
a TCH for signaling services. During a call, if multiple CONN FAIL IND messages are received, or if a REL IND or ERR IND
message is received after a CONN FAIL IND message, this counter is measured only once.
Measurement point
When a TCH is seized as a signaling channel during a call, this counter is incremented by one if the BSC receives a CONN FAIL IND
message.
Measurement points
Description
A1

A2

A3

A4

Subcell
A5
20/11/2015
Page 303 of 316
A6

A10
Measurement points
Description
A1

A2

A3

A4

20/11/2015
Page 304 of 316

A5

A6

A7
A8

Switch
A9
Measurement points
Description
A1

A2

A3

20/11/2015
Page 305 of 316
A4

Stable State
A5

A6

A7

Switch
A8

A9
A10
Measurement points
Description
A1

A2

20/11/2015
Page 306 of 316

A3

A4

Stable State
A5
A6

A9
Measurement points
Description
A1

20/11/2015
Page 307 of 316
A2

A3

A4

Stable State
A5
A6

A7

Switch
A8

A9
A10
Formula
Call Drops on Signaling Channel in Stable State (Connection Failure) (TCH) = [Call Drops due to CONN FAIL Received on TCHF
(Signaling Channel) in Stable State (Radio Link Failure)] + [Call Drops due to CONN FAIL Received on TCHF (Signaling Channel)
in Stable State (HO Access Failure)] + [Call Drops due to CONN FAIL Received on TCHF (Signaling Channel) in Stable State (OM
Intervention)] + [Call Drops due to CONN FAIL Received on TCHF (Signaling Channel) in Stable State (Radio Resource
Unavailable)] + [Call Drops due to CONN FAIL Received on TCHF (Signaling Channel) in Stable State (Other Causes)] + [Call
Drops due to CONN FAIL Received on TCHH (Signaling Channel) in Stable State (Radio Link Failure)] + [Call Drops due to CONN
FAIL Received on TCHH (Signaling Channel) in Stable State (HO Access Failure)] + [Call Drops due to CONN FAIL Received on
TCHH (Signaling Channel) in Stable State (OM Intervention)] + [Call Drops due to CONN FAIL Received on TCHH (Signaling
Channel) in Stable State (Radio Resource Unavailable)] + [Call Drops due to CONN FAIL Received on TCHH (Signaling Channel)
in Stable State (Other Causes)]
Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CHAN.STATIC.STATE.CALL.DROP.TIMES.TCH.CONN.FAIL GBFD-111004
Feature Name
Radio Dedicated
Channel Management

Call Drops on Radio Interface in Stable State (Signaling

Channel)(TCH)
20/11/2015
Page 308 of 316
ID
Counter
1278072632
CELL.SIG.CHAN.STATIC.STATE.CALL.TCH.DROP.TIMES CM3606:Call Drops on Radio

Interface in Stable State
(Signaling Channel)(TCH)
Description
Description
This counter provides the number of calls released because of the ERR IND, CONN FAIL IND, and REL IND messages received by
the BSC.
The MS seizes a signaling channel in any of the following conditions:
z
z
In the immediate assignment procedure, the BTS sends an EST IND message to the BSC.
The MS sends an HO CMP message to the BSC, and the MS seizures a signaling channel.
Measurement point
If the signaling is processed for the call and if a TCH is seized, this counter is measured in any of the following situations:
z

Measurement points Description

A1
A2
A3
A4
A5
A6
A10
Formula
Call Drops on Radio Interface in Stable State (Signaling Channel)(TCH) = [Call Drops on Signaling Channel in Stable State (Error
Indication) (TCH)] + [Call Drops on Signaling Channel in Stable State (Connection Failure) (TCH)] + [Call Drops on Signaling
20/11/2015
Page 309 of 316
Channel in Stable State (Release Indication) (TCH)]

Unit
None
Related Features
Counter
Feature ID
CELL.SIG.CHAN.STATIC.STATE.CALL.TCH.DROP.TIMES GBFD-111004
Feature Name
Management


Channel)(TCHH)
ID
Counter
Description
1278072633
CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE.TCHH RM3271:Call Drops on Radio

Channel)(TCHH)
Description
This counter provides the number of calls released because of the ERR IND, CONN FAIL IND, and REL IND messages the BSC
receives after the MS seizes a traffic channel (TCHH).
Measurement point
Formula
Call Drops on Radio Interface in Stable State (Traffic Channel)(TCHH) = [Call Drops due to ERR IND Received on TCHH (Traffic
Channel) in Stable State (T200 Expired)]+ [Call Drops due to ERR IND Received on TCHH (Traffic Channel) in Stable State
(Unsolicited DM Response)]+ [Call Drops due to ERR IND Received on TCHH (Traffic Channel) in Stable State (Sequence Error)]+
[Call Drops due to CONN FAIL Received on TCHH (Traffic Channel) in Stable State (Radio Link Failure)]+ [Call Drops due to
CONN FAIL Received on TCHH (Traffic Channel) in Stable State (HO Access Failure)]+ [Call Drops due to CONN FAIL Received
on TCHH (Traffic Channel) in Stable State (OM Intervention)]+ [Call Drops due to CONN FAIL Received on TCHH (Traffic
Channel) in Stable State (Radio Resource Unavailable)]+ [Call Drops due to CONN FAIL Received on TCHH (Traffic Channel) in
Stable State (Other Causes)]+ [Call Drops due to REL IND Received on TCHH (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE.TCHH GBFD-113401
Feature Name
Half Rate Speech


Channel) (TCHF)
ID
Counter
1278072634
CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE.TCHF RM3171:Call Drops on Radio
Description
20/11/2015
Page 310 of 316

Channel)(TCHF)
Description
This counter provides the number of calls released because of the ERR IND, CONN FAIL IND, and REL IND messages the BSC
receives after the MS seizes a traffic channel (TCHF).
Measurement point
Formula
Call Drops on Radio Interface in Stable State (Traffic Channel)(TCHF) = [Call Drops due to ERR IND Received on TCHF (Traffic
Channel) in Stable State (T200 Expired)]+ [Call Drops due to ERR IND Received on TCHF (Traffic Channel) in Stable State
(Unsolicited DM Response)]+ [Call Drops due to ERR IND Received on TCHF (Traffic Channel) in Stable State (Sequence Error)]+
[Call Drops due to CONN FAIL Received on TCHF (Traffic Channel) in Stable State (Radio Link Failure)]+ [Call Drops due to
CONN FAIL Received on TCHF (Traffic Channel) in Stable State (HO Access Failure)]+ [Call Drops due to CONN FAIL Received
on TCHF (Traffic Channel) in Stable State (OM Intervention)]+ [Call Drops due to CONN FAIL Received on TCHF (Traffic
Channel) in Stable State (Radio Resource Unavailable)]+ [Call Drops due to CONN FAIL Received on TCHF (Traffic Channel) in
Stable State (Other Causes)]+ [Call Drops due to REL IND Received on TCHF (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.IN.STABLE.STATE.TCHF GBFD-111004
Feature Name
Management


Channel) (TCHH)
ID
Counter
Description
1278072635
CELL.TRAF.CH.CALL.DROPS.HO.FAIL.TCHH RM3272:Call Drops on Radio

Interface in Handover State (Traffic
Channel)(TCHH)
Description
This counter provides the number of times the timer for the target cell waiting for the handover completion expires when the MS, after
seizing a traffic channel (TCHH) and receiving an HO CMD message from the BSC, fails to access the target cell due to various
causes on the Um interface, or provides the number of times the timer for the originating cell waiting for the handover completion
expires when the MS fails to return to the original channel.
Measurement point
Formula
Call Drops on Radio Interface in Handover State (Traffic Channel)(TCHH) = [Failed Internal Intra-Cell Handovers (Timer Expired)
(TCHH) (Traffic Channel)] + [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired) (TCHH) (Traffic
Channel)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHH) (Traffic Channel)]
Unit
None
20/11/2015
Page 311 of 316
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.HO.FAIL.TCHH GBFD-113401
Feature Name
Half Rate Speech


Channel) (TCHF)
ID
Counter
Description
1278072636
CELL.TRAF.CH.CALL.DROPS.HO.FAIL.TCHF RM3172:Call Drops on Radio

Interface in Handover State (Traffic
Channel)(TCHF)
Description
seizing a traffic channel (TCHF) and receiving an HO CMD message from the BSC, fails to access the target cell due to various
causes on the Um interface, or provides the number of times the timer for the originating cell waiting for the handover completion
Measurement point
Formula
Call Drops on Radio Interface in Handover State (Traffic Channel)(TCHF) = [Failed Internal Intra-Cell Handovers (Timer Expired)
(TCHF) (Traffic Channel)] + [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer Expired) (TCHF) (Traffic
Channel)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHF) (Traffic Channel)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.HO.FAIL.TCHF GBFD-111004
Feature Name

Call Drops Due to Local Switch Start Failure (TCHH)

ID
Counter
Description
1278072637
CELL.LOOP.START.FAIL.DROPS.TCHH RM3273:Call Drops Due to Local Switch

Start Failure(TCHH)
Description
After seizing a channel, the MS starts the local switching. This counter is triggered each time a call drops on the TCHH due to the
failure in starting the local switching caused by different reasons. The cause value can be Terrestrial Resource Request Failure,
Failures on the BTS Side, or Timer Expired.
Measurement point
20/11/2015
Page 312 of 316
Formula
Call Drops Due to Local Switch Start Failure(TCHH) = [Call Drops on TCHH Due to BSC local switching Start Failure (Terrestrial
Resource Request Failure)]+ [Call Drops on TCHH Due to BSC local switching Start Failure (Others) ]+ [Call Drops on TCHH Due
to BTS local switching Start Failure (Terrestrial Resource Request Failure)]+ [Call Drops on TCHH Due to BTS local switching Start
Failure (Failures on the BTS Side) ]+ [Call Drops on TCHH Due to BTS local switching Start Failure (Others) ]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.LOOP.START.FAIL.DROPS.TCHH GBFD-117701
BSC Local Switch
GBFD-117702
BTS Local Switch

Call Drops Due to Local Switch Start Failure (TCHF)

ID
Counter
Description
1278072638
CELL.LOOP.START.FAIL.DROPS.TCHF RM3173:Call Drops Due to Local Switch

Start Failure(TCHF)
Description
After the MS seizes a channel, the local switching is started. This counter is triggered each time a call on the TCHF drops due to the
failure in starting the local switching caused by different reasons. The cause value can be Terrestrial Resource Request Failure,
Failures on the BTS Side, or Timer Expired.
Measurement point
Formula
Call Drops Due to Local Switch Start Failure(TCHF) = [Call Drops on TCHF Due to BSC local switching Start Failure (Terrestrial
Resource Request Failure)]+ [Call Drops on TCHF Due to BSC local switching Start Failure (Others)]+ [Call Drops on TCHF Due to
BTS local switching Start Failure (Terrestrial Resource Request Failure)]+ [Call Drops on TCHF Due to BTS local switching Start
Failure (Failures on the BTS Side)]+ [Call Drops on TCHF Due to BTS local switching Start Failure (Others)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.LOOP.START.FAIL.DROPS.TCHF GBFD-117701
BSC Local Switch
GBFD-117702
BTS Local Switch

Call Drops Due to Failures to Return to Normal Call from

Local Switch(TCHH)
20/11/2015
Page 313 of 316
ID
Counter
Description
1278072639
CELL.LOOP.RESTORE.FAIL.DROPS.TCHH RM3274:Call Drops Due to Failures to

Return to Normal Call from Local
Switch (TCHH)
Description
After a call is in the BSC/BTS local switching state, it incurs a handover. The local switching, however, cannot be continued because
the target cell of the handover may not support local switching, the outgoing BSC handover fails, the TRX that carries the target
channel of the handover may not support local switching, or the specified handover fails. The BSC attempts to restore the call to a
normal one. The restoration may fail due to various reasons. If the restoration fails, the call drops. This counter is triggered each time
a call drops on the TCHH due to failure of the call to return to normal call from the BSC/BTS local switching state.
Measurement point
Formula
Call Drops Due to Failures to Return to Normal Call from Local Switch (TCHH) = [Call Drops on TCHH Due to Failures to Return to
Normal Call from BSC local switching (Terrestrial Resource Request Failure)]+ [Call Drops on TCHH Due to Failures to Return to
Normal Call from BTS local switching (Terrestrial Resource Request Failure)]+ [Call Drops on TCHH Due to Failures to Return to
Normal Call from BSC local switching (Others)]+ [Call Drops on TCHH Due to Failures to Return to Normal Call from BTS local
switching (Others)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.LOOP.RESTORE.FAIL.DROPS.TCHH GBFD-117701
BSC Local Switch
GBFD-117702
BTS Local Switch

Call Drops Due to Failures to Return to Normal Call from

Local Switch(TCHF)
ID
Counter
Description
1278072640
CELL.LOOP.RESTORE.FAIL.DROPS.TCHF RM3174:Call Drops Due to Failures to

Return to Normal Call from Local
Switch (TCHF)
Description
After a call is in the BSC/BTS local switching state, it incurs a handover. The local switching, however, cannot be continued because
the target cell of the handover may not support local switching, the outgoing BSC handover fails, the TRX that carries the target
channel of the handover may not support local switching, or the specified handover fails. The BSC attempts to restore the call to a
normal one. The restoration may fail due to various reasons. If the restoration fails, the call drops. This counter is triggered each time
a call drops on the TCHF due to failure of the call to return to normal call from the BSC/BTS local switching state.
Measurement point
Formula
Call Drops Due to Failures to Return to Normal Call from Local Switch (TCHF) = [Call Drops on TCHF Due to Failures to Return to
Normal Call from BSC local switching (Terrestrial Resource Request Failure)]+ [Call Drops on TCHF Due to Failures to Return to
Normal Call from BTS local switching (Terrestrial Resource Request Failure)]+ [Call Drops on TCHF Due to Failures to Return to
Normal Call from BSC local switching (Others)]+ [Call Drops on TCHF Due to Failures to Return to Normal Call from BTS local
20/11/2015
Page 314 of 316
switching (Others)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.LOOP.RESTORE.FAIL.DROPS.TCHF GBFD-117701
BSC Local Switch
GBFD-117702
BTS Local Switch

Call Drops on Traffic Channel (TCHH)

ID
Counter
Description
1278072641
CELL.TRAF.CH.CALL.DROPS.TCHH
RM3275:Call Drops on Traffic Channel

(TCHH)
Description
This counter provides the number of call drops due to various causes after the MS seizes a traffic channel (TCHH).
The MS seizures a traffic channel in any of the following conditions:
z
z
The MS sends an ASS CMP message to the BSC.

The MS seizes a traffic channel and sends an HO CMP message to the BSC.
Measurement point
Formula
Call Drops on Traffic Channel (TCHH) = [Call Drops on Radio Interface in Stable State (Traffic Channel)(TCHH)] + [Call Drops on
Radio Interface in Handover State (Traffic Channel)(TCHH)] + [Call Drops Due to No MR from MS for a Long Time (TCHH)
(Traffic Channel) ] + [Call Drops due to Abis Terrestrial Link Failure (TCHH) (Traffic Channel)] + [Call Drops due to Equipment
Failure (TCHH) (Traffic Channel)] + [Call Drops Due to Local Switch Start Failure(TCHH)] + [Call Drops Due to Failures to Return
to Normal Call from Local Switch (TCHH)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.TCHH GBFD-113401
Feature Name
Half Rate Speech

Call Drops on Traffic Channel (TCHF)

ID
Counter
Description
1278072642
CELL.TRAF.CH.CALL.DROPS.TCHF
RM3175:Call Drops on Traffic Channel

(TCHF)
Description
20/11/2015
Page 315 of 316
This counter provides the number of call drops due to various causes after the MS seizes a traffic channel (TCHF).
The MS seizures a traffic channel in any of the following conditions:
z
z
The MS sends an ASS CMP message to the BSC.

The MS seizes a traffic channel and sends an HO CMP message to the BSC.
Measurement point
Formula
Call Drops on Traffic Channel (TCHF) = [Call Drops on Radio Interface in Stable State (Traffic Channel)(TCHF)] + [Call Drops on
Radio Interface in Handover State (Traffic Channel)(TCHF)] + [Call Drops Due to No MR from MS for a Long Time (TCHF)
(Traffic Channel)] + [Call Drops due to Abis Terrestrial Link Failure (TCHF) (Traffic Channel)] + [Call Drops due to Equipment
Failure (TCHF) (Traffic Channel)] + [Call Drops Due to Local Switch Start Failure(TCHF)] + [Call Drops Due to Failures to Return
to Normal Call from Local Switch (TCHF)]
Unit
None
Related Features
Counter
Feature ID
CELL.TRAF.CH.CALL.DROPS.TCHF GBFD-111004
Feature Name

Call Drops on Signaling Channel (TCH)

ID
Counter
Description
1278072643
CELL.SIG.CH.CALL.DROPS.TCH
RH3331:Call Drops on Signal Channel

(TCH)
Description
seizing a signaling channel (TCH) and receiving an HO CMD message from the BSC, fails to access the target cell due to various
causes on the radio interface, or provides the number of times the timer for the originating cell waiting for the handover completion
Measurement point
Formula
Call Drops on Signal Channel (TCH) = [Failed Internal Intra-Cell Handovers (Timer Expired) (TCHF) (Signaling Channel)] + [Failed
Internal Intra-Cell Handovers (Timer Expired) (TCHH) (Signaling Channel)] + [Number of Unsuccessful Outgoing Internal Inter-Cell
Handovers (Timer Expired) (TCHF) (Signaling Channel)] + [Number of Unsuccessful Outgoing Internal Inter-Cell Handovers (Timer
Expired) (TCHH) (Signaling Channel)] + [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHF) (Signaling Channel)]
+ [Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHH) (Signaling Channel)]
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.SIG.CH.CALL.DROPS.TCH
GBFD-111004
20/11/2015
Page 316 of 316
Counters Related to Clear Requests Sent on the A Interface

ID
Counter
Description
1282412154
CELL.A.CLR.REQ.AFTER.ASS.CMP
CM400:Number of Clear Requests Sent on

the A Interface (Assignment Complete)
1282412155
CELL.A.CLR.REQ.EQUIPMENT.FAIL

the A Interface (Equipment Failure)
1282412156
CELL.A.CLR.REQ.UM.FAIL

the A Interface (Um Interface Failure)
1282412157
CELL.A.CLR.REQ.UM.MSG.FAIL

the A Interface (Um Interface Message
Failure)
1282412158
CELL.A.CLR.REQ.OM

the A Interface (OM)
Description
These counters provide the number of call drops in a cell based on the specific cause.
Measurement point
A specific counter is incremented by one based on the cause when the BSC sends a Clear Request message to the MSC.
Formula
None
Unit
None
Related Features
Counter
Feature ID
Feature Name
CELL.A.CLR.REQ.AFTER.ASS.CMP
GBFD-110501
Call Control
CELL.A.CLR.REQ.EQUIPMENT.FAIL GBFD-110501
Call Control
CELL.A.CLR.REQ.UM.FAIL
Call Control
GBFD-110501
CELL.A.CLR.REQ.UM.MSG.FAIL
GBFD-110501
Call Control
CELL.A.CLR.REQ.OM
GBFD-110501
Call Control

20/11/2015

2G Call Drop Counters

Uploaded by

Copyright:

Available Formats

2G Call Drop Counters

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2G Call Drop Counters

Uploaded by

Copyright:

Available Formats

Call Drop Measurement per Cell(CALL.Drop.

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

M3402:Call Drops Earlier

M3102:Call Drops Earlier

M3502:Call Drops Earlier

M3202:Call Drops Earlier

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

CM360:Call Drops Earlier

CM361:Call Drops Earlier

CM330:Call Drops Earlier

CM331:Call Drops Earlier

CM36C:Call Drops Earlier

CM362:Call Drops Earlier

CM363:Call Drops Earlier

CM364:Call Drops Earlier

Call Drop Measurement per Cell(CALL.Drop.CELL)

CM365:Call Drops Earlier

CM33C:Call Drops Earlier

CM332:Call Drops Earlier

CM333:Call Drops Earlier

CM334:Call Drops Earlier

CM335:Call Drops Earlier

CM30A:Call Drops Earlier

CM337:Call Drops Earlier

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

in Stable State (HO

Call Drop Measurement per Cell(CALL.Drop.CELL)

Drops Due to Abis than

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

on the TRX in the

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

RM333:Radio Drop Earlier

RM330a:Call Drop Earlier

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

RH3331:Call Drops Earlier

Measurement of Call Drops due to ERR IND in Stable State

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drop Measurement per Cell(CALL.Drop.CELL)

the TRX in the

CELL.CALL.DROPS.ERR.IND.UNSOLCELLICITED.DM.RESP.TRAF.OLCELL M3320B:Call Drops

Call Drop Measurement per Cell(CALL.Drop.CELL)

Call Drops Due to ERR IND Received in Stable State, Call

Call Drops Due to the CONN FAIL IND Received in Stable

Call Drops Due to REL IND Received in Stable State, Call

Call Drops Due to No MR from MS for a Long Time, Call Drops

Clear Requests Sent on the A Interface

Call Drops Due to Forced Handover, Call Drops Due to Forced

Successful SDCCH Seizures (Call Type)