DesignConcept Process
DesignConcept Process
DesignConcept Process
DesignConcept
Industrial Design Solution
DesignConcept
DesignConcept
DC3D APM V1
DesignConcept 3D
DC 3D APM V1
Basic Information:
Our Software DC 3D APM is based on former Software CDI and runs under operating
system WINDOWS NT or WINDOWS 2000. It follows the software TOP SOLID and
enlarges its functionalities. TOP SOLID has been developed by MISSLER company/
France. The software is a 3D mechanical tool.
TOP SOLID is associative that means: Moving of points on SPLINE curves will update
directly the 3D model as well as parametric that means: changing of certain values will
have a direct impact on the 3D model. Thus TOP SPOLID is a direct competitor to 3D
mechanical software tools like PRO ENGINEER and others. The Software kernel is
PARASOLID.
DC 3D targets mainly: First prototypes
Working procedure
1. 3D Construction
Like in all 3D mechanical applications you can start right away to construct in 3D. The start
point is a Solid cube trimmed by NURBS surfaces.
DesignConcept 3D
In the directory you will find all operations, being necessary for these steps. Based on
this, you can modify all values. This is the parametric process described before.
DesignConcept 3D
2.
Data import
You may also import 3D data from other systems. We are able to read the following data
formats:
9 IGES
9 PARASOLID
9 DXF/DWG from AUTODESK
9 CATIA V4 (option)
You will need to clean the file and erase unnecessary information. Then the file is ready for
further operations.
DesignConcept 3D
3.
By defining style curves on the 3D model, you clearly set up how your seat will look
like. You also define hereby boundary lines for each single shape. This work is
essential for the further flattening process.
DesignConcept 3D
DesignConcept 3D
Now you are able to open a new document and start the 3D-2D flattening process.
This job runs also automatically and fast.
Each modification in 3D creates new flat patterns.
5.
You will now have a visualisation of compression and tension. This will be scaled in
percent. The result allows you to analyse critically the design of your seat.This tool will
thus improve the team work of designers and trim engineers. An electronic document
facilitates the base of communication within your team.
In a traditional work environment you manually need approx. 2 weeks for a new
prototype. With DC3D you may achieve the same result within 2 days
DesignConcept 3D
6 . Measuring of 2 D patterns
Here you measure the length of your parts and so you can evaluate, how good the
further sewing process can be expected
Picture: Measuring
DesignConcept 3D
7.
You can change curves and parameters and you can insert darts in order to minimize
tension at certain areas.
DesignConcept 3D
8. Seam allowances and notches
Notches can be set in the 3D document by means of symbols. Seam allowances will
be attached on the 2D patterns.
Now you can export these pattern results via DXF/AAMA format to any 2D CAD
software.
DesignConcept 3D
9.
You will gather all patterns in another document. Here you may define the appropriate
cutting tool for all parts of your patterns.Those parts can be saved in DXF data format
and are ready now for export. All patterns can be cut now and sewn together.Your first
prototype is ready.
DesignConcept 3D
DesignConcept
DesignConcept
DC3D TR V1
DesignConcept 3D
DC 3D TR V1
Basic information
This additional software module allows you to simulate the design of your seat. Unlike
other applications we do not need to have a physical model ready to take pictures from. It
has been created on the screen. So you are much earlier ready to work on it and you do
not have to wait until you have a real existing seat model at your disposal.
This will speed up and ease your development cycle, because you do not have to build so
many prototypes.
The Steps:
Textile Mapping
Scanned fabrics and imported files are precondition. You can lay your patterns onto the
scanned fabric and get a realistic impression.
DesignConcept 3D
1. Motive Matching
DesignConcept 3D
By means of preselected elements or those created by yourself, you are able to apply
realistic effects on your model. The results can be printed or exported to other 2D
professional design software.
We are compatible to ALIAS Wavefront, which is said to be the best on the market in terms
of shadowing and light effects
Our Lectra Software DC 3D TR V1 is a perfect step within this cycle.