Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Technical Specifications Shaper Machine: ZSTT 17421012

    Uploaded by

    Soumyajit Bose
    The document provides technical specifications for a portable shaper machine intended for machining blade insertion grooves in alloy steel steam turbine rotors. Key details include: the machine will have a maximum stroke length of 500mm and travel speed of 140 strokes/minute, powered by a 7.5HP motor. It will have a customized tool post and mount on slides along the rotor length for automatic movement. The machine is required to machine rotors with high precision and not cause vibrations during operation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Specifications Shaper Machine: ZSTT 17421012

    Uploaded by

    Soumyajit Bose
    38 views3 pages
    The document provides technical specifications for a portable shaper machine intended for machining blade insertion grooves in alloy steel steam turbine rotors. Key details include: the machine will have a maximum stroke length of 500mm and travel speed of 140 strokes/minute, powered by a 7.5HP motor. It will have a customized tool post and mount on slides along the rotor length for automatic movement. The machine is required to machine rotors with high precision and not cause vibrations during operation.

    Original Description:

    shaping machine

    Original Title

    NIT_3279_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical specifications for a portable shaper machine intended for machining blade insertion grooves in alloy steel steam turbine rotors. Key details include: the machine will have a maximum stroke length of 500mm and travel speed of 140 strokes/minute, powered by a 7.5HP motor. It will have a customized tool post and mount on slides along the rotor length for automatic movement. The machine is required to machine rotors with high precision and not cause vibrations during operation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views3 pages

    Technical Specifications Shaper Machine: ZSTT 17421012

    Uploaded by

    Soumyajit Bose
    The document provides technical specifications for a portable shaper machine intended for machining blade insertion grooves in alloy steel steam turbine rotors. Key details include: the machine will have a maximum stroke length of 500mm and travel speed of 140 strokes/minute, powered by a 7.5HP motor. It will have a customized tool post and mount on slides along the rotor length for automatic movement. The machine is required to machine rotors with high precision and not cause vibrations during operation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    ZSTT 17421012

    TECHNICAL SPECIFICATIONS
    SHAPER MACHINE
    (1) PURPOSE :
    The portable type Shaper is required for machining of the blade insertion grooves in
    Alloy Steel (UTS < 980 N/MM2, 0.2 Proof Stress- 700 N/MM2) Steam Turbine Rotors.

    (2) TECHNICAL SPECIFICATIONS :


    2.1 Length of stroke

    : Max.500 mm

    2.2 No. of speeds to Ram

    : To be indicated by the party

    2.3 No. of Ram cycles / min.

    : Max.140 strokes/min.
    Steps to be indicated by the party

    2.4 Motor Power

    : A.C. 7.5 H.P.


    Specs. & make to be given by the party

    2.5 Vertical Travel of tool post slide

    : 150 mm (Manual feed only)

    2.6 Machine table is NOT required . Shaper length will be reduced accordingly.
    2.7 The Shaper should have a customized Tool post as per enclosed BHEL
    Drg.No. R6729-0002 (Ref. : ANNEXURE -1) .
    2.8 The Machine should be mounted on a slide (bed on which machine will travel) which
    will be clamped to the shop floor bed plates during operation. The movement of the
    machine will be along the length of the rotor on the slides through a feed gear box
    with motor . Provision for automatic movement and clamping to be provided.
    Overall dimensions of the machine should be as per the enclosed sketch .

    (Ref. : ANNEXURE- 2)
    Motor specifications to be given by the party.
    2.9 Separate lever for minor adjustments in the ram stroke length shall be
    provided.
    2.10 Machine structure should be rigid so that vibrations do not occur during
    machining of blade insertion grooves.
    2.11 Machine slide (bed on which machine will travel) should be of single piece cast iron
    block with hardened and ground guideways.
    2.12 Automatic lubrication for each slide shall be provided.
    1/3

    ZSTT 17421012
    2.13 There should not be any leakage / spillage of oil during operation or otherwise.
    2.14 All moving guide ways, as well as their matching moving parts, shall be of
    hardened and ground steel.
    2.15 Proper lifting arrangement shall be provided for shifting of machine from one
    place to another place.
    2.16 Operator's platform shall be provided on both sides of machine.
    2.17 Machine light shall be provided.
    2.18 For proper evaluation of the offer , Machine catalogue / Drgs. / Sketches shall be
    provided along with the quotation.
    2.19 Standard tool kit for operation and maintenance of the machine shall
    be provided.
    (3) POWER SUPPLY :
    AC 3-Phase, 415V +10 % / -15%, 50 HZ +/- 3%.
    (4) SPARES :
    Following Spares shall be provided :
    4.1 Lubrication pump with its pipings

    01 Set

    4.2 All Oil seals

    01 Set

    4.3 Lead nut for ram movement

    01 No.

    4.4 Lead nut for Tool head slide

    01 No.

    (5) MANUALS :
    5 sets of operation / maintenance manuals, containing electrical circuit diagram,
    detailed assembly drawings of each sub assembly with part list shall be provided.
    (6) COLOUR :
    Colour of the machine shall be apple green.
    (7) WARRANTY :
    Supplier shall provide full and complete Warranty/Guarantee for two years trouble free
    operation after successful commissioning of the machine.

    2/3

    ZSTT 17421012

    (8) INSTALLATION and COMMISSIONING :


    Party is to take full responsibility for carrying out start up and testing of the machine.
    Successful proving of components (complete machining of blade insertion grooves in
    one rotor) shall be considered as part of commissioning. During commissioning,
    accuracies as per component drawing (Refer ANNEXURE -3) are to be achieved.

    (9) MACHINE ACCEPTANCE :


    9.1 Provisional acceptance of the machine can be made by BHEL's
    representative at supplier's work prior to despatch, if desired.
    9.2 Final acceptance shall be made by BHEL at it's plant following successful
    commissioning and achieving specified accuracy.
    9.3 Accuracy chart and schematic drawings shall be submitted by the party along with
    the quotation.
    9.4 Tes t certificate shall be furnished along with the machine.
    (10) QUALIFYING CONDITION :

    The supplier should be reputed original manufacturer of Shaper machines.

    3/3

    You might also like