Technical Seminar Report Doc - Format 2015-16
Technical Seminar Report Doc - Format 2015-16
ECE DEPARTMENT
GUIDELINES FOR PREPARING
THE B.TECH (ELECTRONICS & COMMUNICATION ENGINEERING)
TECHNICAL SEMINAR REPORT
Size:
The technical seminar report should be submitted in A4 size.
Number of copies to be submitted:
Spiral bonded hard copies 2
Soft copy (in CD) 1
Paper, Typing, Format:
Bond paper should be used for the preparation of the Seminar Report. Typing
should be done on the 12 font size letters. (Times New Roman)
The layout should provide a margin of 4 cm on the left, 3 cm on the top and
bottom, and 1.5 cm on the right.
Fresh paragraph should commence after five spaces. Double spacing shall be
provided throughout the report. The page numbers shall be indicated at the
bottom-middle of each page.
First Page
.............................................................
Title
Technical Seminar Report
submitted in partial fulfillment of the requirement for the award of the Degree of
Bachelor of Technology
in
Electronics and Communication Engineering
By
.............................................................
(Name of the candidate) & (Roll. No)
Under the guidance of
Internal Guide Name
Designation
Second page: The second page should contain a certificate signed by the Guides in the
following format.
CERTIFICATE
This is to certify that the Technical Seminar report entitled . . . . . . . . . . . . . . . . . . . . . .
has been submitted by Mr/Ms. . . . . . . . . . . . . . . . . . . . . . . . . . . bearing Roll No.. . . . . . . . . .
under my guidance in partial fulfillment of the degree of Bachelor of Technology in
Electronics and Communication Engineering to the Jawaharlal Nehru Technological
University Hyderabad during the academic year 2015-16.
Date:
..
Name of the Supervisor
Mr. J. Srikanth
Principal
Third page:
Acknowledgment in the Third Page
Fourth page:
The fourth page should contain an abstract of the technical seminar report.
Page 5th & 6th:
In these pages, candidate must provide a table of contents, list of tables, list of figures
and notation.
Note: All the above pages are to be numbered in Roman numerals of lower case.
Arrangement of Chapters:
The following is the suggested format for arranging the technical seminar report
matter into various Chapters.
1.
2.
3.
4.
5.
Introduction
Features/Specifications
Theoretical and Analytical Discussion
Advantages, Disadvantages and Applications,
Conclusion & Future scope
References/Bibliography/Websites
Appendices (if any).