Scribd Logo
Upload

Welcome to Scribd!

  • 207 views

    9.SOP Barring Gear or Turning Gear

    Uploaded by

    Dodik Nugroho
    This document provides a 3 page operation procedure for a turning gear in English and Indonesian. It describes the safety precautions, preparation steps, start up process which includes switching the panel to ON and engaging the hand wheel, and shutdown process which involves pressing the stop button. The document includes a revision history and identifies the preparer, reviewer, and approver of the procedure.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    9.SOP Barring Gear or Turning Gear

    Uploaded by

    Dodik Nugroho
    207 views5 pages
    This document provides a 3 page operation procedure for a turning gear in English and Indonesian. It describes the safety precautions, preparation steps, start up process which includes switching the panel to ON and engaging the hand wheel, and shutdown process which involves pressing the stop button. The document includes a revision history and identifies the preparer, reviewer, and approver of the procedure.

    Original Description:

    barring gear SOP

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a 3 page operation procedure for a turning gear in English and Indonesian. It describes the safety precautions, preparation steps, start up process which includes switching the panel to ON and engaging the hand wheel, and shutdown process which involves pressing the stop button. The document includes a revision history and identifies the preparer, reviewer, and approver of the procedure.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    207 views5 pages

    9.SOP Barring Gear or Turning Gear

    Uploaded by

    Dodik Nugroho
    This document provides a 3 page operation procedure for a turning gear in English and Indonesian. It describes the safety precautions, preparation steps, start up process which includes switching the panel to ON and engaging the hand wheel, and shutdown process which involves pressing the stop button. The document includes a revision history and identifies the preparer, reviewer, and approver of the procedure.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 5

    Turning Gear

    Operation Procedure
    Page 1 of 5

    Work Instruction
    G1-7013

    Revision no.

    Prepared by
    Reviewed by
    Approved by

    Revision : 00
    Date :

    Effective date

    Issue no.

    DCC

    Signature

    Name Surname

    Date

    Guruh Iriyanto

    18/05/2015

    Turning Gear
    Operation Procedure
    Page 2 of 5
    REVISION HISTORY

    Rev.

    Effective date

    00

    Revision : 00
    Date :

    Description of Revision
    Initial Issue

    Prepared

    Reviewed

    Approved

    Turning Gear
    Operation Procedure
    Page 3 of 5

    ENGLISH

    BAHASA INDONESIA

    1.

    UNIT
    Utility

    1.

    UNIT
    Utility

    2.

    SYSTEM
    Turbine

    2.

    SISTIM
    Turbin

    3.

    SAFETY
    Ensure all permits are signed off

    3.

    KESELAMATAN
    Pastikan semua

    ijin

    kerja

    sudah

    ditandatangani

    4.

    Ensure Operator is wearing


    recommended PPE

    Pastikan operator menggunakan PPE

    Ensure All Equipment in good condition


    and ready to start

    Semua Equipment dalam kondisi siap

    TURNING GEAR G1-7013 START UP


    PROCEDURE
    Preparation:
    Ensure electrical power sources for
    turning gear available
    Ensure Auxiliary Oil Pump G1-7011 has
    been running
    Ensure Jacking Oil Pump G1-7012has
    been running
    Ensure Speed 0 Rpm

    Revision : 00
    Date :

    yang disarankan
    untuk dijalankan.
    4.

    PROSEDUR START TURNING GEAR


    G1-7013
    Tahap Persiapan:
    Pastikan Source power untuk turning gear
    sudah tersedia
    Pastikan Auxiliary Oil Pump G1-7011
    sudah beroperasi
    Pastikan Jaacking oil Pump G1-7012
    sudah beroperasi
    Pastikan putaran rotor/speed 0 Rpm

    Turning Gear
    Operation Procedure
    Page 4 of 5

    BAHASA INDONESIA
    ENGLISH
    Pastikan Kondisi di sekitar equipment ter
    Ensure around the equipment is free

    bebas dari gangguan


    Pastikan valve inlet dan outlet sudah

    Ensure inlet and outlet valve open

    terbuka
    Start Turning Gear G1-7013

    Start Turning Gear G1-7013


    Pindahkan Switch On/Off pada Panel
    Change the Switch ON/OFF at
    panel into ON Position
    Spin up the turning gear G1-7013
    hand wheel until engaged condition
    Turn on/Push the Start Push button at
    turning Gear G1-7013 panel
    Ensure turning gear motor G1-7013
    running and light indicator on
    Ensure rotor speed 1.5 Rpm (Rolling)

    ke posisi On
    Putar hand wheel turning gear G1-7013
    sampai Engaged
    Tekan tombol start pada panel Turning
    gear G1-7013
    Pastikan motor turning gear G1-7013
    running dan lampu pada panel menyala
    Pastikan rotor berputar serta speed 1.5
    rpm
    Pastikan Turning Gear G1-7013 bekerja

    Ensure Turning gear G1-7013 running


    in normal condition, and there are no
    abnormality such as noise or friction

    Revision : 00
    Date :

    dalam

    kondisi

    normal

    tidak

    abnormality baik suara akibat gesekan

    ada

    Turning Gear
    Operation Procedure
    Page 5 of 5

    ENGLISH
    STOP TURNING GEAR G1-7013
    Push/select the Stop push button at
    turning gear G17013 panel
    Ensure turning gear motor G1-7013
    stop
    Ensure light indicator Off
    Ensure rotor stop (0 Rpm)

    Revision : 00
    Date :

    BAHASA INDONESIA
    STOP TURNING GEAR G1-7013
    Tekan tombol Stop pada panel turning
    gear G1-7013
    Pastikan motor turning gear G1-7013
    berhenti
    Pastikan lampu indicator stop turning
    gear G1-7013 menyala
    Pastikan rotor berhenti (0 Rpm)

    You might also like