Scribd
Upload
84 views3 pages

Set and Operate A Manual Feed Edge-Trimming Machine To Trim Edged Panels

This document describes a unit standard for preparing to set and operate, setting, and operating a manual feed edge-trimming machine to trim edged panels. It outlines the purpose, level, credits, and status of the unit standard. It also defines key terms and lists the elements and performance criteria candidates must demonstrate, such as obtaining job specifications, setting the side trimmer and edge rounder, monitoring the machine's output, and cleaning the work area.

Uploaded by

ahmadafaq09
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
84 views3 pages

Set and Operate A Manual Feed Edge-Trimming Machine To Trim Edged Panels

This document describes a unit standard for preparing to set and operate, setting, and operating a manual feed edge-trimming machine to trim edged panels. It outlines the purpose, level, credits, and status of the unit standard. It also defines key terms and lists the elements and performance criteria candidates must demonstrate, such as obtaining job specifications, setting the side trimmer and edge rounder, monitoring the machine's output, and cleaning the work area.

Uploaded by

ahmadafaq09
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

25567 version 1

Page 1 of 3

Set and operate a manual feed edge-trimming machine to trim edged


panels
Level

Credits

Purpose

People credited with this unit standard are able to prepare to set and operate,
set, and operate, a manual feed edge-trimming machine to trim edged
panels.

Subfield

Furniture

Domain

Furniture Making

Status

Registered

Status date

19 June 2009

Date version published

19 June 2009

Planned review date

31 December 2014

Entry information

Open.

Accreditation

Evaluation of documentation and visit by NZQA and


industry.

Standard setting body (SSB)

Competenz

Accreditation and Moderation Action Plan (AMAP) reference

0173

This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.


Special notes
1

This unit standard must be assessed against on-job.

Personal protective equipment, appropriate to job requirements, is to be selected and


used in accordance with worksite policies and procedures and manufacturers
instructions.

New Zealand Qualifications Authority

25567 version 1
Page 2 of 3
3

Definitions
Manufacturers instructions are instructions provided by manufacturers of
substances, equipment, and machinery used in furniture making. These instructions
may include details on safe and correct handling, use and storage of substances
and/or details on substance properties. Examples are labels on substance
containers, product data sheets, and operators manuals.
Safe operating instructions (SOIs) are documented instructions attached to machines
which detail requirements for safe operation of the particular machine.
Worksite policies and procedures refer to documented policies and to documented or
other directions provided to staff. These may include, but are not limited to, ways of
managing health and safety, environmental considerations, quality, and production,
and must conform to legislation. Examples include standard operating procedures,
company health and safety plans, on-site briefings, and supervisors instructions.

Elements and performance criteria


Element 1
Prepare to set and operate a manual feed edge-trimming machine to trim edged panels.
Performance criteria
1.1

Job specifications are obtained and explained in accordance with worksite


policies and procedures.
Range

panel edges to be trimmed, timeframe.

1.2

Edged panels are obtained in accordance with job specifications.

1.3

Adjustment of machine is explained in accordance with manufacturers


instructions.
Range

1.4

Maintenance requirements are explained in accordance with manufacturers


instructions.
Range

1.5

side trimmer, edge rounder.

side trimmer, tables, round trimmer.

Environmental and safety requirements are met in accordance with worksite


policies and procedures.
Range

electrical power, lighting, ventilation, dust extraction fans.

Element 2
Set a manual feed edge-trimming machine to trim edged panels.
Performance criteria
2.1 Side trimmer is set for trimming of edge tape in accordance with job specifications and
worksite policies and procedures.

New Zealand Qualifications Authority

25567 version 1
Page 3 of 3
2.2

Edge rounder is set to round edge tape in accordance with job specifications.

2.3

Test piece is run and checked against job specifications. Adjustments are made
if required.

Element 3
Operate a manual feed edge-trimming machine to trim edged panels.
Performance criteria
3.1

Machine operation is in accordance with SOIs.

3.2

Output of machine is monitored to ensure trimmed edging meets job


specifications. Any out of specifications panels are replaced in accordance with
worksite policies and procedures.

3.3

Edged panels are trimmed in accordance with job specifications.

3.4

Machine and work area are made clean, clear, and safe in accordance with
worksite policies and procedures.

Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP
also includes useful information about special requirements for organisations wishing to
develop education and training programmes, such as minimum qualifications for tutors and
assessors, and special resource requirements.
Comments on this unit standard
Please contact the Competenz [email protected] if you wish to suggest changes to
the content of this unit standard.

New Zealand Qualifications Authority

You might also like