ABB Disconnectors

Di
s
Disconnect switches sw con
itc nec
Index he t
s
19 - Disconnect switches
Non-fusible and fusible disconnect switches...........19.1 - 19.6 Accessories............................................................19.29 - 19.40

General information Standard handles & shafts...........................................................................................19.30 - 19.32
Versatility, broad range, compact size................................................................................19.1 Auxiliary contacts.....................................................................................................................19.33
International acceptance, installation options, broad range of accessories........................19.2 Terminal lugs...........................................................................................................................19.34
Mounting, mounting positions, incoming power feeds, terminal connections.....................19.3 Terminal shrouds.....................................................................................................................19.35
Finger proof, door interlock, padlockable, positive opening operation................................19.4 Additional poles.......................................................................................................................19.36
Welded contact protection, clear position indication, visible blades, constant control........19.5 Fuse monitors & carriers..........................................................................................................19.37
High performance, superior short circuit protection, fuse isolation.....................................19.6 Miscellaneous accessories & replacement parts......................................................................19.38
Conversion, transfer & bypass mechanisms............................................................................19.39
Non-fusible disconnect switches............................19.7 - 19.18
Approvals and ratings................................................................................................................19.7 Enclosed disconnect switches..............................19.41 - 19.48
Ordering details guide......................................................................................................19.8 - 19.9 General information.....................................................................................................19.42 - 19.44
Ordering details information.....................................................................................................19.10 Non-fusible
Base and DIN rail mounted, 16 - 3150A..................................................................................19.11 3 pole, 16A - 3150A...........................................................................................................19.45
Door mounted, 16 - 100A.......................................................................................................19.12 6 pole, 16A - 1200A...........................................................................................................19.46
Side operated..........................................................................................................................19.13 Fusible
Flange & double throw.................................................................................................19.14 - 19.17 3 pole, 30A - 800A.............................................................................................................19.47
OTDC Disconnect switches.....................................................................................................19.16 Accessories.............................................................................................................................19.48
Fusible disconnect switches.................................19.19 - 19.28 Technical data.........................................................19.49 - 19.66

Approvals and ratings..............................................................................................................19.19 Technical data.............................................................................................................19.49 - 19.59
Ordering details guide..............................................................................................................19.20 Auxiliary contact timing diagrams.................................................................................19.60 - 19.63
Ordering details information.....................................................................................................19.21 NEMA Environmental ratings.......................................................................................19.64 - 19.65
Base & DIN rail mounted.........................................................................................................19.22 Definitions................................................................................................................................19.66
Side operated and flange.............................................................................................19.23 - 19.26
High speed fuse pattern..............................................................................................19.27 - 19.28 Approximate dimensions.......................................19.67 - 19.91
19
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Di
s
sw con
Non-fusible & fusible itc nec
he t
disconnect switches s
General information
Disconnect switches
Non-fusible & fusible
Versatility
ABB disconnect switches are designed to offer maximum versatility in many ways.
Broad range
ABB's open style non-fusible switches have seventeen amperage sizes from 16A –
3150A. The fusible range is 30A - 1200A. All sizes are compact, heavy duty, 600V
disconnect switches. Many sizes are available in 2, 3, 4, 6, and 8 pole configurations.
Compact size
The non-fusible disconnect switches' compact dimensions allow panel size reduction in
new applications or easily retrofit into space-sensitive existing installations. The fusible
switch occupies little more panel space than the appropriate fuses.
19

t
n ec
on es General information
sc h
Di witc
s
International acceptance
UL listed, CSA approved, IEC rated, CE marked, and most other international standards.
UL98 (CSA 22.2 No.4) — UL File # E101914, CSA File #LR58077
For OT30 - OT1200, OS30A - 1200A switches with OT/OS OH_pistol grip handles
Suitable for use as motor disconnects or industrial control panel disconnects on service
entrance equipment, panelboards, switchboards, industrial control equipment, motor
control centers, etc. and are horsepower and ampere rated.
UL508 (CSA 22.2 No. 14) — UL File # E63822, CSA File #LR58247
For OT16 – OT80 switches, OH_ selector handles
Suitable for use in equipment or machinery as motor controllers & motor disconnects and
are horsepower and ampere rated.
IEC
Tested in accordance to IEC 947-1 and 3, IEC 664, IEC 269, and IEC 204.
CE
Compliance with the European Machine Directive IEC 204 (EN 60204).
Installation options
Rotary through the door: available in all sizes, non-fusible 16A – 3150A; fusible 30A -
1200A.
Flange: versions available in 30A - 1200A sizes.
A rotary disconnect switch may be installed nearly anywhere in a control panel — mounting
is not limited to the upper right hand corner of the panel.
Mount the switch where it conveniently fits in your panel and simply install the handle on
the door, in line with the switch. The switch and handle are mechanically linked through an
easily adjusted shaft. This allows fast and easy installation into panels of different depths
and layouts.
19
Broad range of accessories
• Handles — UL/NEMA type 1, 3R, 4, 4X, 12; IP54, 65, 66
• Auxiliary contacts available for every switch size
• Additional power poles
• Additional terminal poles (neutrals & grounds)
• Terminal shrouds
• 6 & 8 pole mechanisms
• Transfer mechanisms
• Bypass mechanisms
• Mechanical interlock mechanisms
• Electro-mechanical interlock mechanisms

Di
s
sw con
General information itc nec
he t
s
Mounting
Disconnect switches offer several mounting possibilities:
• Door mounting on an enclosure door or sidewall for non-fusible, 16A – 100A
• DIN rail mounting for non-fusible, 16A – 100A; and fusible, OS30 - OS100
• Base mounting with screws for all switch sizes
Mounting positions
Disconnect switches offer several mounting possibilities:
Incoming power feeds

Disconnect switches can be used equally well with either top or bottom
incoming power feeds.
Terminal connections
Versatile connecting possibilities for non-fusible and fusible switches 19
• Ring tongue crimp on lugs
• Direct bus
• Terminal lugs

t
n ec
on es
sc h
General information
Di witc
s
Finger proof
Dead-front construction plus terminal shrouds reduce the
risk of touching live parts, improving the safety and reliability
of the installation.
Door interlock
The handle and shaft provide a door interlock; the
door can not be opened when the switch is in the
“ON” position. NOTE: Some handles provide a
method for qualified personnel to circumvent the door
interlock. This is commonly referred to as a “defeater”
mechanism.
Padlockable
Handles can be padlocked in the “OFF” position with up to three padlocks. Ad-
ditionally, the switch mechanism can be directly padlocked in the “OFF” position
when the door is open. NOTE: Some handles can be ordered with the ability to
padlock in both the “ON” & “OFF” positions, please consult your ABB sales of-
fice.
Positive opening operation

All switches operate according to the
“positive opening operation” principle.
19 This means the contacts are opened
and closed by a driven mechanism,
a solid moving bridge, not merely
springs. This provides reliable position
indication to the user; if the switch is
in the “OFF” position, the contacts are
open.

Di
s
sw con
General information itc nec
he t
s
Welded contact protection

Positive opening operation safeguards users in case of welded contacts due to an
overload or short circuit. The switch can not reach the “OFF” position unless the
contacts are truly open. If any or all of the contacts are welded shut, the switch
mechanism will only allow the handle to operate a maximum of 45°. This safeguards
personnel by:
• Alerting them a problem has occurred
• Maintaining the door interlock and
• Not allowing a padlock to be inserted
Clear position indication

All switches and handles have clear “ON” and “OFF” designations.
Whether the door is open or closed, it is possible to simply look at the
switch and determine if the switch is “ON” or “OFF”.
Visible blades
Visible blades offer additional safety for non-fusible switches, 100A — 1200A
Track resistant material

Excellent track resistant material, CTI > 600V, IEC 112, reduces the risk of flash-
over between phases in even the most severe circumstances.
Constant control for non-fusible disconnect switches

The OT16F3 to OT100F3 provide the user with constant control over the power circuit. Whether the enclosure door is
open or closed, qualified personnel have the ability to manually operate the switch. This is most meaningful when qualified
personnel are working with the enclosure door open: In case of an emergency down-stream, the main three phase power
can be disconnected immediately using the black, direct mounted handle.
19

t
n ec
on es General information
sc h
Di witc
s
High performance
The mechanism is quick-make/quick-break, meaning the contacts oper-
ate independently of the speed and force at which the handle is oper-
ated. This, in combination with unique, patented self-cleaning contacts,
provides a long, reliable, electrical life.
Superior short circuit protection

Fuses efficiently limit the peak let-through current,
i2t, during a fault better than any other product,
contributing to safety and reliability. Selectivity and
coordination are easily accomplished with fused pro-
tection. Fusible disconnect switches accept a wide
range of fuses:
Class CC 30A
Class J 30A – 600A
Class L 800A – 1200A
Fuse isolation
Fused switches contain contacts on both sides of the fuse.
The fuses are totally isolated in the “OFF” position, reduc-
ing the risk of shock to authorized personnel — even if the
switch has been back fed.
19

Di
s
sw con
Non-fusible disconnect switchesNo itc nec
n- he t
16A – 3150A, 600VAC fus s
ibl
200-600A, 1000VDC e
Disconnect switches
ABB SwitchLine includes 16 different amperage sizes from 16A to 3150A. The basic
construction provides flexibility, safety, and high performance in an extremely compact
size. ABB SwitchLine is a perfect choice for all switching applications from industrial motor
control to construction safety switches.
UL listed, CSA approved, IEC rated, CE marked, and most other international standards.
Non-fusible
For OT30, OT60, OT100, OT200, OT400, OT600, OT800, OT1200

OETL-NF1600 – OETL-NF2000 switches, OH_ pistol grip handles
control centers, etc. and are horsepower rated and ampere rated. 19
UL508 (CSA 22.2 No. 14) — UL File # E63822, CSA File #LR58247
For OT16 – OT80 switches, OH_ selector handles
Suitable for use in equipment or machinery as motor controllers & motor disconnects and
are horsepower and ampere rated.
IEC
Tested in accordance to IEC 947-1 and 3, IEC 664, IEC 269, and IEC 204
CE
Compliance with the European Machine Directive IEC 204 (EN 60204)

ct
ne s
n
o e
sc h le
General information
Di witc usib Selection guide
s n-f
No OT16F3 – OT100F3
OT16F3 OT25F3 OT40F3 OT63F3 OT80F3 OT30F3 OT60F3 OT100F3
Catalog number 3 pole OT16F3 OT25F3 OT40F3 OT63F3 OT80F3 OT30F3 OT60F3 OT100F3
General purpose A 20 30 40 60 80 30 60 100

amp rating
Approvals 1
2 pole N/A N/A N/A N/A N/A N/A N/A N/A
3 pole UL508 & IEC UL508 & IEC UL508 & IEC UL508 & IEC UL508 & IEC UL98 & IEC UL98 & IEC UL98 & IEC
Technical ratings – UL,CSA 2
Max operating voltage V 600 600 600 600 600 600 600 600
Max horsepower rating
Three phase
240V HP 5 7.5 10 15 20 10 20 30
480V HP 10 15 20 30 40 20 40 50
600V HP 10 20 25 30 40 30 40 50
Single phase
120V HP 1 1.5 2 2 2 2 3 5
240V HP 2 3 5 5 5 5 7.5 15
Technical ratings – IEC2
Rated insulation and operational
voltage. AC20 and DC20 V 750 750 750 750 750 750 750 750
Rated thermal current, Ith
AC 20/DC 20 open A 25 32 40 63 80 40 63 115
AC 20/DC 20 enclosed A 25 32 40 63 80 40 63 115

AC 21A
≤500V A 16 25 32 63 80 40 63 100
≤690V A 16 25 32 63 80 40 63 100
Rated operational power AC23
400/415V kW 7.5 9 11 22 37 15 18.5 37
690V kW 7.5 9 11 15 18.5 15 15 37
Physical characteristics
3 pole
Weight 3 lb 0.24 0.24 0.24 0.59 0.59 0.79 0.79 0.79
Dimension
3 pole
H
in 2.68 2.68 2.68 3.60 3.60 3.94 3.94 3.94
W
in 1.38 1.38 1.38 2.07 2.07 2.76 2.76 2.76
D
in 2.20 2.20 2.20 2.85 2.85 2.95 2.95 2.95
Accessories
Terminal lug kit
Integral Integral Integral Integral Integral Integral Integral Integral
Terminal shroud • • • • • • • •
Auxiliary contact
• • • • • • • •
Shaft/handle diameter 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm
.24" x .24" .24" x .24" .24" x .24" .24" x .24" .24" x .24" .24" x .24" .24" x .24" .24" x .24"
Handle UL/NEMA type
Type 1, 3R, 12 • • • • • • • •
Type 1, 3R, 4, 4X, 12 • • • • • • • •
Handle type
19 Selector
Pistol

•

•
•
•
•
•
•
•
•
•
—
•
—
•
—
•
Recommended pistol handle length 45 - 65mm 45 - 65mm 45 - 65mm 45 - 65mm 45 - 65mm 45 - 65mm 45 - 65mm 45 - 65mm
Maximum recommended shaft length 290mm 290mm 290mm 290mm 290mm 290mm 290mm 290mm
Conversion kits
6 pole • • • • • • • •
Transfer • • • • • • • •
Bypass • • • • • • • •
Mechanical interlock • • • • • • • •
Electrical interlock
— — — — — — — —
• = Available
— = Not available
1 UL listed switches are also CSA approved.

2 For complete technical information please see page 19.55-19.71.
3 Switch only.

Di
s
sw con
General information No itc nec
n- he t
Selection guide fus s
ibl
OT200 – OT1200 & OETL-NF1600 – OETL-NF3150 e
OT200U03 OT400U03 OT600U03 OT800U03 OT1200U03 OETL-NF1600SW OETL-NF2000SW OETL-NF3150SW
Catalog number 3 pole OT200U03 OT400U03 OT600U03 OT800U03 OT1200U03 OETL-NF1600 OETL-NF2000 OETL-NF3150
General purpose A 200 400 600 800 1200 1600 2000 3150
amp rating
Approvals 1
2 pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC
4 pole UL98 & IEC UL98 & IEC UL98 & IEC IEC IEC IEC IEC IEC
Technical ratings – UL,CSA 2
Three phase
240V HP 75 125 200 250 — — — —
480V HP 150 250 450 500 — — — —
600V HP 200 350 500 600 — — — —
Single phase
120V HP — — — — — — — —
240V HP — — — — — — — —
Technical ratings – IEC 2
voltage. AC20 and DC20 V 1000 1000 1000 1000 1000 1000 1000 1000
AC 20/DC 20 open A 250 400 800 1250 1600 2500 2500 3150
AC 20/DC 20 enclosed A 250 400 800 1250 1600 2300 2300 2600
AC 21A ≤500V A 250 400 800 1250 1600 25004 25004 31504

≤690V A 250 400 800 1250 1600 25004 25004 31504
400/415V kW 132 220 400 400 400 400 400 400
690V kW 240 355 800 — — — — —
Weight 3 3 pole lb 2.9 5.7 11.4 35.9 38.55 127.7 127.7 127.7
Dimension
3 pole H
in 6.69 8.66 10 19.09 19.09 25.04 25.04 25.04
W
in 6.67 8.7 10.64 14.29 14.29 18.43 18.43 18.43
D
in 3.30 3.35 5.56 4.92 4.92 10.67 10.67 10.67
Accessories
Terminal lug kit OZXA-200 OZXA-400 OZXA-800 OZXA-1200 OZXA-1200 OZXA-28 OZXA-28/2 OZXA-28/2
Terminal shroud • • • • • — — —
Auxiliary contact
• • • • • • • •
Shaft/handle diameter 6mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm
.24" x .24" .47" x .47" .47" x .47" .47" x .47" .47" x .47" .47" x .47" .47" x .47" .47" x .47"
Handle UL/NEMA type
Type 1, 3R, 12 • • • • • • • •
Type 1, 3R, 4, 4X, 12 • • • • • • • •
Handle type
Selector — — — — — — — — 19
Pistol
• • • • • • • •
Recommended pistol handle length 65 - 80mm 125 - 175mm 125 - 175mm 125 - 175mm 125 - 175mm 125 - 175mm 125 - 175mm 125 - 175mm
Maximum recommended shaft length 290mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm
Conversion kits
6 pole • • • • • — — —
Transfer • • • • • — — —
Bypass • • • • • — — —
Mechanical interlock • • • • • • • •
Electrical interlock • • • • • • • •
S = Standard feature
• = Available
— = Not available

2 For complete technical information please see page 19.55-19.71.
3 Switch only
4 IEC 947-3 Utilization Category B, Infrequent operation

ct
n ne s Selection information
o e
sc h le
Di witc usib
s n-f
No
Standard part number designation 1

Non-Fusible OT Switches (16 to 100A)
OT 16 F 3 C
Amperage
16 = 20 amps* 63 = 60 amps* 60 = 60 amps
25 = 30 amps* 80 = 80 amps* 100 = 100 amps
40 = 40 amps* 30 = 30 amps 160 = 125 amps
Number of Poles
3 = 3 poles 4 = 4 poles 6 = 6 poles
Special Configuration
C = Double throw switch
* UL508 listed switches. OT30_, OT60_ and OT100_ are cUL98 listed
Non-Fusible OT Switches (200A and above)
OT 200 U 03 C
Amperage
200 = 200 amps 400 = 400 amps 600 = 600 amps 800 = 800 amps 1200 = 1200 amps
Number of Poles & Placement of Mechanism

02 = 2 poles to right of mechanism 04 = 4 poles to right of mechanism
03 = 3 poles to right of mechanism 40 = 4 poles to left of mechanism
30 = 3 poles to left of mechanism 22 = 2 poles to left, 2 poles to right of mechanism
12 = 1 pole to left, 2 poles to right of mechanism 13 = 1 pole to left, 3 poles to right of mechanism
C = Double throw switch
All OT200__, OT400_, OT600_ , _OT800_ and OT1200_ switches are cUL98 listed.
Selector Handles
OHB S 1 P H
Handle Color
B = black Y = Red/Yellow
Physical Size
Connection to Switch
A = external shaft P = snap on R = screw
Protection Class
H=1 J= 1, 3R, 12
Pistol Handles
O H B 65 J 6 E011
Handle Color
B = Black Y = Red/Yellow M = Stainless Steel
Handle Length
65 = 65mm 80 = 80mm 125 = 125mm 145 = 145mm 274 = 274mm 330 = 330mm
Environmental Rating
J = 1, 3R, 12 L = 1, 3R, 12, 4, 4X
19
Shaft Diameter
6 = 6mm 12 = 12mm
E011 = 3 position double throw handle
EH = Stainless steel hasp
1 Part designation keys are provided for reference only. Not all variations or configurations are available.

Di
s
sw con
Base & DIN rail mounted 1 No itc nec
n- he t
fus s
16A - 3150A ibl
e
For a complete assembly,

please select one of each:
1 switch (page 19.11)
1 handle (page 19.30)
1 shaft (page 19.32)
1 terminal lug kit (page 19.34)
NOTE: For additional accessories, see
pages 19.29 - 19.42.

(Lug kits only necessary on switches 200A and above) OT200U03 + OXP6X210 + OHB80J6 + OZXA-200
2 Pole 3 Pole 4 Pole 2 6 Pole 3

UL UL general purpose
IEC AC21 amp rating Catalog number Catalog number Catalog number Catalog number
only amp rating
20 16 — OT16F3 — OT16F6
30 25 — OT25F3 — OT25F6
UL 508 40 40 — OT40F3 — OT40F6
60 63 — OT63F3 — OT63F6
80 80 — OT80F3 — OT80F6
30 40 — OT30F3 — OT30F6
60 63 — OT60F3 — OT60F6
100 115 — OT100F3 — OT100F6
OT200U03 OT200U04 —
200 250 OT200U02 OT200U30 OT200U40 —
OT200U12 OT200U22 —
OT400U03 OT400U04 —
400 630 OT400U02 OT400U30 OT400U40 —
UL 98 OT400U12 OT400U22 —
OT600U03 OT600U04 —
600 800 OT600U02 OT600U30 OT600U40 —
OT600U12 OT600U22 —
800 1250 OT800U02 OT800U03 OT800U04 —
1200 1600 OT1200U02 OT1200U03 OT1200U04 —
1600 2500 4 OETL-NF16002SW OETL-NF1600SW OETL-NF16004SW —
2000 2500 4 OETL-NF20002SW OETL-NF2000SW OETL-NF20004SW —
- 3150 4 OETL-NF31502SW OETL-NF3150SW OETL-NF31504SW —
Bulk packed 3 Pole, 600V Switches 5

UL UL general purpose
IEC AC21 amp rating Bulk pack Quantity Catalog number
only amp rating
20 16 50 OT16F3/B50
30 25 50 OT25F3/B50
UL508 40 40 50 OT40F3/B50
60 63 50 OT63F3/B50
80 80 50 OT80F3/B50
30 40 25 OT30F3/B25
UL98 60 63 25 OT60F3/B25
100 115 25 OT100F3/B25
19
1 Above 100A, base mount with screws only.

2 A snap on fourth pole may be added on 16-100A switches.
3 For a 6 or 8 pole switch 200 amp and above, a conversion mechanism accessory kit can be used with two 3 or 4 pole switches. See page 19.40.
4 Vertical busbar provided as standard on OETL-NF1600-OETL-NF3150 switches. For alternate back or edgewise mounting busbar, see page 19.38.
5 Order quantity is 1.

ct
n ne s
o e
sc h le Door mounted 1
Di witc usib
s n-f 16 - 100A
No

please select one of each: 2
pages 19.29 - 19.42.
+
OT63FT3 OHBS2RJ
3 Pole 3 Bulk packs
UL general purpose IEC AC21 Catalog Bulk pack Bulk pack

UL only
amp rating amp rating number quantity Catalog number
20 16 OT16FT3 50 OT16FT3/B50
30 25 OT25FT3 50 OT25FT3/B50
UL508 40 40 OT40FT3 50 OT40FT3/B50
60 63 OT63FT3 50 OT63FT3/B50
80 80 OT80FT3 50 OT80FT3/B50
30 40 OT30FT3 25 OT30FT3/B25
UL98 60 63 OT60FT3 25 OT60FT3/B25
100 115 OT100FT3 25 OT100FT3/B25
19
1 Door mounted switches do not provide door interlock

2 Door mounted switches do not require shafts
3 A snap on fourth pole may be added
4 The environmental rating of the pistol handle derates to NEMA 1 when used in conjunction with the OHZX6 adapter.

Di
s
Other configurations sw con
No itc nec
n- he t
Side operated fus s
ibl
30 - 600A e

1 switch
1 handle
1 shaft + +
1 terminal lug kit
OETL-NF400-S OXP12x325 OHB145J12E00S
Side operated switches — 3 pole

UL Maximum horsepower rating
IEC
general Three phase Weight Catalog
AC21
purpose (Lbs.) number
amp rating 200V 208V 240V 480V 600V
amp rating
30 32 5 7.5 7.5 15 20 1.90 OSNF30-S 1
60 63 15 15 15 30 50 3.90 OSNF60-S 1
100 125 25 25 30 60 75 4.50 OSNF100-S
OSNF30-S 400 630 100 100 125 250 350 13.66 OETL-NF400-S
600 800 150 150 200 400 500 13.66 OETL-NF600A-S
Handles
Length Weight Catalog
UL/NEMA type Color Marking Defeatable Padlockable
inches/mm (Lbs.) number
For use with OSNF30-S

Black OHB65J6E00S
1, 12, 3R 2.65/65 O/I & Off/On Yes Yes Yes
Red/Yel OHY65J6E00S
For use with OSNF60-S — OSNF100-S

OETL-ZX74 Black OHB80J6E00S
1, 12, 3R 3.1/80 O/I & Off/On Yes Yes Yes
Red/Yel OHY80J6E00S
For use with OETL-NF400-S — OETL-NF600A-S

Black O/I & Off/On OHB145J12E00S
1, 12, 3R Red/Yel 4.9/145 O/I & Off/On Yes Yes Yes OHY145J12E00S
OHY__J__ Metal Off/On OETL-ZX74
Shaft
For use with: Description
(Inches/mm) (Lbs.) number
OSNF30-S 6.7/170 .20 x .20” (5 x 5mm) 0.08 OXP6X170
OSNF60-S – OSNF100-S 8.3/210 .24 x .24” (6 x 6mm) 0.10 OXP6X210
OXP6X170 OETL-NF400-S – OETL-NF600A-S 12.8/325 .47 X .47” (12 X 12mm) 0.90 OXP12X325
OXP12X325 19
Terminal lug kits

Wire Wire Lugs Catalog
For use with: Weight
size type per kit number
OSNF30-S #18 – 8 — Cu — Integral
OZXA-24 OZXA-25
OSNF60-S #14 – 4 — Cu — Integral
OSNF100-S #14 – 2/0 0.43 Cu/Al 6 OZXA-24
OETL-NF400-S #2 – 600 kcmil 3.520 Cu/Al 6 OZXA-26
OETL-NF600A-S (2) #2 – 600 kcmil 4.62 Cu/Al 6 OZXA-27
OZXA-26 1 Fused switches with solid links installed.

ct
n ne s
o e
sc h le Special configurations
Di witc usib
s n-f Shaft operated flange
No 30A - 100A
+ +
Switch Handle Shaft
30A -100A Flange operated — non fusible switches (Shaft)

- 3 pole
UL general Catalog
purpose amp rating number
30 OT30F3-F
60 OT60F3-F
100 OT100F3-F
OT100F3
Flange handles — for use with OT30_, OT60_, OT100
Catalog
UL/ NEMA type Marking Defeatable Padlockable
number
1, 3R, 12 OFF/ON Yes Yes DSFHN-HS12

4, 4X OFF/ON Yes Yes DSFHN-HS4
Shafts
Maximum enclosure Catalog
For use with:
depth (inches) number
DSFHN-HS12
OT30_ - OT100_ 16 OTFS-16
OT30_ - OT100_ 24 OTFS-24
Door hardware NEMA 12

Catalog
Item
number
Safety door latch, 2 point, door less than 40" high KDH2R
Safety door latch, 2 point, door greater than 40" high KDH3R
Flange operated fusible and non-fusible disconnect switches

DSFHS-12 ABB’s solution for complying with the new NFPA79 requirements is Flange Operated Fusible and Non-fusible Disconnect
Switches.
NFPA 79 changes requires main disconnecting means to be operable without the use of accessory tools or devices, independent
of door position. This code also includes an interlocking provision to prevent the closing of disconnects while the enclosure door
is open, unless an interlock is operated by a deliberate action.
The flange operated disconnect switches are available as ridged shaft or flexible cable operated versions. The cable operated
19 version allows you to install the disconnect switch virtually anywhere in the enclosure depending on the length of the cable.
Cables are available in lengths up to 84 inches.
The designs are cost-effective NFPA 79 solutions offering quick and easy installation.

Di
s
sw con
Special configurations No itc nec
n- he t
Cable operated flange fus s
ibl
e
30A - 1200A
+ + + +
Switch Handle Cable Lug kit (as required) Operating mechanism 1
Non-fusible
UL general purpose Catalog UL general purpose Catalog
amp rating number amp rating number
30 OT30F3 400 OETL-NF400-FC
60 OT60F3 600 OETL-NF600A-FC
100 OT100F3 800 OETL-NF800A-FC
200 OT200U30 1200 OETL-NF1200-FC
Flange handles — UL98; UL file #E101914

OT100F3 For use with: Environmental Catalog
rating number
NEMA 1, 3R, 12 OHF1C12
OT30 - 100F3, OT160E3, OT200U30
NEMA 4, 4X OHF1C4
NEMA 1, 3R, 12 K7FCH
OT400_, OETL-NF600_, OETL-NF1200_
NEMA 4, 4X K7FCH4
Flexible cables
Catalog
For use with: Cable length (inches)
number
OHF1C12
36 OXC1L36
48 OXC1L48
OT30 - 100F3, OT160E3,
60 OXC1L60
OT200U30
72 OXC1L72
84 OXC1L84
48 K7C048
60 K7C060
OT400_, OETL-NF600_, OETL-NF1200_
72 K7C072
84 K7C084
OXC1L36-
OXC1L84 Operating mechanisms
Catalog
For use with:
number
OT30 - 100F3 MKCS1
OT160E3 MKCS3
OT200U30 MKCS4
OETL-NF400-FC - OETL-NF1200-FC Included
19
1 Operating mechanism required for OT30 - OT200
Low Voltage Products & Systems

ct
ne s
n
o e
sc h le
Special configurations
Di witc usib Cable operated flange
s n-f
No 30A - 1200A
Terminal lug kits

For use Wire Wire Catalog
Description Lugs per kit
with size type number
#4 – 300 kcmil Cu/Al — 6 OZXA-200
OT200U30 #4 – 300 kcmil Cu/Al — 3 OZXA-200/3
(6) #4-6 AWG Cu/Al Distribution lug 3 OZXA-206S
OETL-NF400-FC #2 - 600 kcmil Cu/Al - 6 OZXA-26
OETL-NF600 - #2 - 600 kcmil Cu/Al - 6 OZXA-27
#2 - 600 kcmil Cu/Al - 3 OZXA-27/3P
OETL-NF800
(6) 14-6 AWG Cu/Al Distribution lug 3 OZXA-175/400
(4) #2-600 kcmil Cu/Al - 6 OZXA-28
OETL-NF1200 (8) 2/0 + (2) #2-600 kcmil Cu/Al - 3 OZXA-28/3P
(8) 2/0 + (2) #2-600 kcmil Cu/Al Distribution lug 3 OZXA-32
Door hardware — NEMA 12

Catalog
Item
number
Safety door latch, 2 point, door less than 40” high KDH2R
Safety door latch, 3 point, door greater than 40” high KDH3R
Terminal shrouds
Weight Catalog
For use on Description
(lbs.) number
OT30 - OT100 3 Pole 0.02 OTS125T3
OT200 3 Pole Long Type Shroud 0.2 OTS250G1L/3
OT200 3 Pole Short Type Shroud 0.13 OTs250G1S/3
OETL-NF400 3 Pole (includes one shroud for line and load side) 0.62 OETL-ZX111
OETL-NF600 3 Pole (includes one shroud for line and load side) 0.66 OETL-ZX94
OETL-NF800 3 Pole (includes one shroud for line and load side) 0.88 OETL-2X800A
OETL-NF1200 3 Pole (includes one shroud for line and load side) 1.2 OETL-2X119
19

Di
s
sw con
Special configurations No itc nec
n- he t
Double throw switches fus s
ibl
e
16A - 600A

1 switch (page 19.17) + + + +
1 bridging bar (page 19.17)
pages 19.29 - 19.42 OT200U04C OHY__J6E011 OXS6X__ Lug kit (as required) Bridging bars
(Lug kits only necessary on switches 200A and above)

3 Pole 4 Pole 1
UL general
UL IEC AC21
purpose amp Catalog number Catalog number
only amp rating
rating
20 16 OT16F3C —
30 25 OT25F3C —
UL508 40 40 OT40F3C —
60 63 OT63F3C —
80 80 OT80F3C —
30 40 OT30F3C —
60 63 OT60F3C —
OT63F3C 100 115 OT100F3C —
OT200U03C OT200U04C
200 250
OT200U30C OT200U40C
UL98 OT400U03C OT400U04C
400 630
OT400U30C OT400U40C
OT600U03C OT600U04C
600 800
OT600U30C OT600U40C
OT800U03C OT800U04C
800 1250
OT800U30C OT800U40C
Bridging busbar kits — required for OT200_C through

OT600_C 2
Description For Use On: Catalog number
OT200_C OTZC13
OT400_C OTZC23
3 Pole Kit
OT600_C OTZC33
OT800_C OTZC53
OT200_C OTZC14
OT400_C OTZC24
4 Pole kit
OT600_C OTZC34
OTZC13 OT800_C OTZC54
Bridging bars are required on 200-600A double throw switches to operate as standard double
throw switches.
Otherwise, they will operate as two mechanically interlocked switches.
19
1 A snap on power pole may be added to build a 4 pole 16-100A double throw switch.
2 For 16-100A double throw switches, jumpers are not provided.

ct
ne s
n
o e
sc h le
OTDC Disconnect switches
Di witc usib 28A - 55A, 600VDC
s n-f
No 100A - 200A, 1000VDC
UL General purpose IEC DC21B Number Number Catalog number Catalog number
UL Category
amp rating amp rating of circuits of poles w/jumper installed w/o jumper
28A - 55A, 600VDC

28 28 1 8 +1 – OT40FD9N2
UL98B
55 55 1 8 – OT80FD8
100A - 200A, 1000VDC

100 100 1 2 OTDC100US11 OTDC100U11
100 100 1 2 OTDC100US02 OTDC100U02
100 100 2 4 OTDC100US22 OTDC100U22
UL98B
200 250 1 2 OTDC200US11 OTDC200U11
OTDC200U11 OTDC200U02
200 250 1 2 OTDC200US02 OTDC200U02
180 250 2 4 OTDC180US22 OTDC180U22
Phase separators
Units Weight/
Switch Catalog
type unit
size number
(pcs) (lbs.)
100...200 6 0.04 OTDCB250/6
Grey plastic plate for maintaining 1" clearance between the phases without terminal
shrouds. Snap on mounting. Includes as standard in OTDC100...200U_types.
Jumper / heat sink

Units Weight/
Switch Catalog
type unit
size number
(pcs) (lbs.)
100...200 1 0.04 OEZXY91
Terminal lugs
Switch Catalog
size number
100...200 OZXA-200
Wiring diagrams
1000 V DC 1000 V DC
+ - + -
+ 1000 V DC - Jumper Jumper
OTDC180U22 OTDC180US22
Factory jumper
OTDC200U11 OTDC200US11
Load
L Load Load
o L L
a o o
d a a
d
19
d
+ 1000 V DC
+ +
1000 V DC 1000 V DC
1 "S" indicates jumpers installed. Jumpers are installed on line side, connecting 2 poles in series

Di
s
Fusible disconnect switches sw con
i n
Fu tche ect
30A – 1200A, 600VAC sib s
le
Disconnect switches
ABB PowerLine includes seven different amperage sizes from 30A to 1200A. All ABB
fusible switches are designed to meet customer requirements in terms of high interrupting
capacity and long electrical life while occupying little more panel space than the
appropriate fuses. The basic construction provides flexibility and high performance in an
extremely compact size. ABB PowerLine switches are a perfect choice to withstand the
heat and humidity of the tropics, the extreme cold of the arctic and any rugged industrial
environment you may have.
ABB fusible switches are available with a wide range of fuse clip options:
UL USA CSA Canada
DIN Europe BS United Kingdom
NFC France Ultra-rapid
As well as the corresponding approvals: UL listed, CSA approved, IEC rated, CE marked, 19
Fusible
and most other international standards.

For 30A – 1200A switches, OH__ pistol grip handles
control centers, etc. and are horsepower rated and ampere rated.
IEC
Tested in accordance to IEC 947-1 and 3, IEC 664, IEC 269, and IEC 204
CE
Compliance with the European Machine Directive IEC 204 (EN 60204)

ct
ne s
n
o e
sc h
Selection guide
Di witc ible OS30FACC12 – OS1200L03
s us
F
OS30FA_12 OS60J12 OS100J03 OS200J03 OS400J03 OS600J03 OS800L3 OS1200L03
Catalog number 3 pole

OS30FACC12 OS30FAJ12 OS60GJ12 OS100GJ03 OS200J03 OS400J03 OS600J03 OS800L3 OS1200L03
General purpose
amp rating A 30 30 60 100 200 400 600 800 1200
Approvals 1
2 pole N/A N/A N/A UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC
3 pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC
4 pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC
Technical ratings
(UL,CSA)
Max operating voltage V 600 600 600 600 600 600 600 600 600
Three phase
240V HP 7.5 7.5 15 30 60 125 200 250 —
480V HP 15 15 30 60 125 250 400 500 —
600V HP 20 20 50 75 150 350 500 600 —
Single phase
120V HP 2 2 — — — — — — —
240V HP 3 3 — — — — — — —
UL fuse class CC J J J J J J L L
Technical ratings (IEC)
voltage. AC20 and DC20 V 1000 1000 1000 1000 1000 1000 1000 1000 1000
AC 20/DC 20 open A 32 32 63 160 200 400 630 800 1250
AC 20/DC 20 enclosed A 32 32 63 160 200 400 600 720 1250

AC 21A ≤500V A 32 32 63 160 200 400 630 800 1250
≤690V A 32 32 63 160 200 400 630 800 1250
400/415V kW 14/15 14/15 30 80/90 110 220/230 355 350/380 560
690V kW 25 25 60 132 200 400 560 600 1000
Weight 3 pole switch
lb 1.54 1.54 2.86 3.30 5.9 12.56 28.66 37.44 63.93
4 pole lb 1.98 1.98 3.52 3.96 7.5 15.21 37.48 46.26 —
Dimension 3 pole H in 3.66 3.60 3.94 5.67 6.5 9.29 12.03 12.03 16.7
W in 4.15 4.15 5.63 7.07 7.1 10.04 13.86 13.86 16.42
D in 4.10 4.10 5.04 5.10 5.2 6.93 9.18 9.18 11.62
Accessories
Double break contacts S S S S S S S S S
Fuse cover S S S S S S S S S
Terminal lug kit Integral Integral Integral OZXA-24 OZXA-200 OZXA-400 OZXA-800 OZXA-1200 OZXA-1200
Terminal shroud Not required Not required Not required • • • • • •
Auxiliary contact
• • • • • • • • •
19 Shaft/handle diameter 6mm
.24 x .24"
6mm
.24 x .24"
6mm
.24 x .24"
6mm
.24 x .24"
6mm
.24 x .24"
12mm
.47 x .47"
12mm
.47 x .47"
12mm
.47 x .47"
12mm
.47 x .47"
Handle UL/NEMA type
Type 1, 3R, 12 • • • • • • • • •
Type 1, 3R, 4, 4X, 12 • • • • • • • • •
Recommended pistol handle length 45 - 65mm 45 - 65mm 45 - 65mm 45 - 65mm 65 - 80mm 125 - 175mm 125 - 175mm 125 - 175mm 125 - 175mm
Maximum recommended shaft length 290mm 290mm 290mm 290mm 290mm 595mm 595mm 595mm 595mm
Electrical interlock — — — — — • • • •
S = Standard
• = Available
— = Not available

Di
s
sw con
Selection information i n
Fu tche ect
sib s
le
Standard part number designation 1

Fusible OS Switches (30A)
OS 30 F A J 22 F
Amperage
30 = 30 amps
Fuse Type/Class
J = Class J fuse compatible CC= Class CC fuse compatible
Number of poles and placement of the mechanism

12 = 1 Pole to the left of mechanism, 2 poles to the right of mechanism
22 = 2 Poles to the left of mechanism, 2 poles to the right of mechanism
Fusible OS Switches (60 to 100A)
OS 100G J 03
Amperage
60 = 60 amps 100 = 100 amps
Fuse Type/Class
J = Class J fuse compatible

03 = 3 Poles to the right of mechanism 04 = 4 poles to the right of mechanism
Fusible OS Switches (200A and above)
OS 200 J 04 F
Amperage
200 = 200 amps 400 = 400 amps 600 = 600 amps 800 = 800 amps 1200 = 1200 amps
Fuse Type/Class
J = Class J fuse compatible

03 = 3 Poles to the right of mechanism 04 = 4 poles to the right of mechanism
12 = 1 Pole to left of mechanism, 2 poles to right 22 = 2 Poles to left of mechanism, 2 poles to right
30 = 3 Poles to the left of mechanism 40 = 4 Poles to the left of mechanism
Pistol Handles
O H B 65 J 6 E011
Handle Color
B = Black Y = Red/Yellow M = Stainless Steel
Handle Length
65 = 65mm 80 = 80mm 125 = 125mm 145 = 145m 175 = 175mm 274 = 274mm 275 = 275mm 330 = 330mm
Environmental Rating
J = 1, 3R, 12 L = 1, 3R, 12, 4, 4X
Shaft Diameter
6 = 6mm 12 = 12mm
E011 = 3 position transfer switch handle
EH = Stainless Steel Hasp
19
1 Part designation keys are provided for reference only. Not all variations or configurations are available.

ct
ne s
n
o e
sc h
Base & DIN rail mounted
Di witc ible 30 – 1200A
s us
F
For a complete assembly, please select

one of each:
+ + +
pages 19.29 - 19.42. OS400J03 + OXP12X280 + OHB145J12 + OZXA-24
(Only required for 100A & above.)
2 Pole 3 Pole 4 Pole

UL general purpose amp
UL Fuse Type 600V Catalog number Catalog number Catalog number
rating
J — OS30FAJ12 OS30FAJ22F
30
CC 1 — OS30FACC12 OS30FACC22F
60 J — OS60GJ12 2 OS60GJ22F
OS60GJ03
100 J — OS100GJ12 2 OS100GJ04F

OS100GJ03 2
OS200J03 OS200J04F
UL 98 200 J OS200J02 OS200J30 OS200J13F
OS30FAJ12 OS200J12 OS200J22F
OS400J03
400 J OS400J02 OS400J30 OS400J04F
OS400J12
OS600J03
600 J OS600J02 OS600J30 OS600J04F
OS600J12
800 L OS800L02 OS800L03 OS800L04F
1200 L OS1200L02 OS1200L03 OS1200L04F
19
1 Rejection style fuses only.

2 Din Rail Mountable: 60A & 100A requires Din Rail Adapter OSGZD1

Di
s
sw con
Other configurations i n
Fu tche ect
Side operated sib s
le
30A – 400A, UL fuse class J,CC

1 switch
1 handle
1 shaft + +
1 terminal lug
OS30FAJS30 OXP6X170 OHY65L6E00S
Side operated switches — 3 pole

UL UL Maximum horsepower rating
general fuse Three phase Weight Catalog
purpose type (Lbs.) number
amp rating 600V 200V 208V 240V 480V 600V
30 J 5 7.5 7.5 15 20 1.54 OS30FAJS30

30 CC 5 7.5 7.5 15 20 1.54 OS30FACCS30
60 J 15 15 15 30 50 3.52 OS60GJS30
100 J1 25 25 30 60 75 3.97 OS100GJS30
OS60GJS30 200 J1 50 50 60 125 150 15.21 OES200J3-S
400 J1 100 100 125 250 350 17.20 OES400J3-S
Handles
UL/NEMA Length Catalog
IEC type Color Marking Defeatable Padlockable Weight
type (Inches/mm) number
For use with OS30A_S30

Black OHB65J6E00S
1, 3R, 12 IP65 2.6/65 OFF/ON Yes Yes 0.29
Red/Yel OHY65L6E00S
For use with OS60GJ30, OS60JS30 & OS100GJ30
Black OHB80J6E00S
1, 3R, 12 IP65 3.1/80 OFF/ON Yes Yes 0.30
Red/Yel OHY80J6E00S
For use with OES200J3-S & OES400J3-S
Black OHB145J12E00S
OS100GJS30
Yes Yes 0.39
1, 3R, 12 IP65 Red/Yel 4.9/145 OFF/ON OHY145J12E00S
Metal No Yes 1.50 OETL-ZX74
Shaft
For use with: Description
(Inches/mm) (Lbs.) number
OS30AJS30 & OS30ACCS30 6.7/170 .20 x .20” (5 x 5mm) 0.08 OXP6X170
OS60GJS30 & OS100GJS30 8.3/210 .24 x .24” (6 x 6mm) 0.10 OXP6X210
OES200J3-S & OES400J3- 12.8/325 .47 X .47” (12 X 12mm) 0.90 OXP12X325
OETL-ZX74 Terminal lug kits

For use with:
Wire
size
Weight
Wire
type
Lugs
per kit
Catalog
number
19
OS30AJS30 & OS30ACCS30 #18 – 8 — Cu — Integral
OS60GJS30 #14 – 4 — Cu — Integral
OS100GJS30 #14 – 2/0 0.43 Cu/Al 6 OZXA-24
OES200J3-S #6 – 300 kcmil 0.93 Cu/Al 6 OZXA-25
OES400J3-S #2 – 600 kcmil 3.50 Cu/Al 6 OZXA-26
OZXA-24

ct
ne s
n
o e
sc h
Di witc ible Shaft operated flange
s us
F
30A - 100A
For a complete assembly, please select one of each.
+ + +
Switch Handle Shaft Lug kit (as required)
30A -100A Flange operated fusible switches (Shaft) — 3 pole

Maximum horsepower rating
UL general
UL fuse type Catalog
purpose amp rating Three phase
600V number
A
240V 480V 600V
30 J 7.5 15 20 OS30FAJF30
30 CC 7.5 15 20 OS30FACCF30
60 J 15 30 50 OS60GJF30
100 J 30 60 75 OS100GJF30
OS30FAJF30
Flange handles
Catalog
UL/ NEMA type Marking Defeatable Padlockable
number
1, 3R, 12 OFF/ON Yes Yes DSFHN-HS12

4, 4X OFF/ON Yes Yes DSFHN-HS4
Shafts
Catalog
For use with: Maximum enclosure depth (inches) number
16 DSFHS-12
OS30_ - OS100_ 21 DSFHS-17
26.5 DSFHS-22
DSFHN-HS__
Terminal lug kits and accessories
Catalog
For use on: Description Wire size Wire type Qty.
number
OS30_ Lug #18 - #8 Cu -- Integral

OS60_ Lug #14 - #4 Cu -- Integral
OS100_ Lug #14 - 2/0 Cu/Al 6 OZXA-24
OS30_- OS100_ Aux. Contact 1 NO 1 OA1G10
DSFHS-__ Aux. Contact 1 NC 1 OA3G01
OS30_ Adapter Needed for mounting aux. Contacts on OS30_ 1 OSZ4
OS100_ Shroud Includes one set of 3 for use on line or load side 1 OSS160T3
19 Door hardware NEMA 12

Catalog
Item
number
OZXA-24 Safety door latch, 3 point, door greater than 40” high KDH3R
Flange operated fusible and non-fusible disconnect switches

ABB’s solution for complying with the NFPA79 requirements is Flange Operated Fusible and Non-fusible Disconnect Switches.
NFPA 79 changes requires main disconnecting means to be operable without the use of accessory tools or devices, independent
of door position. This code also includes an interlocking provision to prevent the closing of disconnects while the enclosure door
is open, unless an interlock is operated by a deliberate action.
The flange operated disconnect switches are available as ridged shaft or flexible cable operated versions. The cable operated
version allows you to install the disconnect switch virtually anywhere in the enclosure depending on the length of the cable.
Cables are available in lengths up to 84 inches.
OA1G__
The designs are cost-effective NFPA 79 solutions offering quick and easy installation.

Di
s
sw con
Special configurations i n
Fu tche ect
Cable operated flange sib s
le
30A - 800A
For a complete assembly, please select one each of the following:
+ + + +
Switch Handle Cable Lug kit (as required) Operating mechanism
Fusible
UL general UL fuse type Catalog
purpose amp rating 600V number
30 J OS30FAJ12
30 CC OS30FACC12
60 J OS60GJ30
100 J OS100GJ30
200 J OS200J30
400 J OES400J3-FC
600 J OES600J3-FC
800 L OES800L3-FC
OS200J03
Flange handles — UL98; File #E101914

For use with: Environmental Catalog
rating number
NEMA 1, 3R, 12 OHF1C12

OS30_12, OS60J12, OS100AJ30, OS200J30
NEMA 4, 4X OHF1C4
OES400_, OES600_, OES800_ NEMA 4, 4X K7FCH4
OHF1C12
Flexible cables
Catalog
For use with: Cable length (inches)
number
36 OXC1L36
48 OXC1L48
OS30_12, OS60J12, OS100AJ30, OS200J30 60 OXC1L60
72 OXC1L72
84 OXC1L84
OXC1L36- 48 K7C048
OXC1L84 60 K7C060
OES400_, OES600_, OES800_
72 K7C072
84 K7C084
Operating mechanisms
Catalog
For use with:
number
OS30AFJ12, OS30AFCC12 MKCS2

19
OS60GJ12 MKCS3
OS60GJ30, OS100GJ30 , OS200J30 MKCS4

ct
ne s
n
o e
sc h
Di witc ible Cable operated flange
s us
F
30A - 800A
Terminal lug kits
For use Wire Wire Lugs Catalog
Description
with size type per kit number
OS100GJ30 #4 – 300 kcmil Cu/Al - 6 OZXA-24
#4 – 300 kcmil Cu/Al - 3 OZXA-200/3
OS200J30
(6) #4-6 AWG Cu/Al Distribution lug 3 OZXA-206S
#2 - 600 kcmil Cu/Al - 6 OZXA-26
OES400 #2 - 600 kcmil Cu/Al - 3 OZXA-26/3P
Lug Kit (2) #2 - 500 kcmil Cu/Al Distribution lug 6 OZXA-33
(12) #14 - 6 kcmil Cu/Al - 3 OZXA-175/400
OES600 - OES800 (2) #2 - 600 kcmil Cu/Al - 6 OZXA-27
(2) #2 - 600 kcmil Cu/Al Distribution lug 3 OZXA-27/3P
Door hardware NEMA 12

Catalog
Item
number
OZXA-200
Safety door latch, 3 point, door greater than 40” high KDH3R
Terminal shrouds
Weight Catalog
For use on Description
(lbs.) number
OS100 1 Pole 0.04 OSS160T1
OS100 3 Pole 0.12 OSS160T3
OS200 3 Pole Long Type Shroud 0.2 OSS200G1L/3
OS200 3 Pole Short Type Shroud 0.13 OSS200G1S/3
OES400 3 Pole (includes one shroud for line and load side) 0.13 OESA-ZX123
19

Di
s
Other configurations sw con
i n
Fu tche ect
High speed fuse pattern sib s
le
Special type fuses

1 switch body
1 adapter kit
+ + +
1 shaft
1 handle OESA_R_ OESAZX_ OXP_ OH_
Selecting switch bodies and adapter kits

Please select switch body and adapter kit according to your fuses. Switch body alone can not be used — an adapter kit is always
needed.
Switch bodies – 200 A through 800 A

Maximum horsepower rating Max. allowed
UL
three phase fuse power Catalog
general purpose Weight
dissipation at number
amp rating 240 V 480 V 600 V rated current
200 60 125 150 22W 15.21 OES200R03
400 125 250 350 45W 17.20 OES400R03
American standard
600 200 400 500 60W 37.48 OES600R03
800 250 500 600 65W 37.48 OES800R03
200 60 125 150 22W 17.4 OES200R04
400 125 250 350 45W 19.4 OES400R04
600 200 400 500 60W 46.3 OES600R04
800 250 500 600 65W 46.3 OES800R04
Fuse adapter kits — for switches OES200 – OES400 For 3 pole switch For 4 pole switch
Catalog Catalog
Fuse standard
number number
OESAZX1-S4 OESAZX1-S4/4
American standard
OESAZX1-S5 OESAZX1-S5/4
DIN80 (DIN43653) OESAZX1-S7 OESAZX1-S7/4
DIN80 sizes 00 and 000 (DIN 43653) OESAZX1-S9 OESAZX1-S9/4
DIN 43653 Flush-end, 70mm body OESAZX1-S8 OESAZX1-S8/4
Flush-end, 50mm body OESAZX1-S3 OESAZX1-S3/4
French OESAZX1-S10 OESAZX1-S10/4
French with micro switches OESAZX1-S11 OESAZX1-S11/4
Fuse adapter kits — for switches OES600 – OES800 For 3 pole switch For 4 pole switch
Catalog Catalog
Fuse standard
number number
American standard OESAZX2-S4 OESAZX2-S4/4
DIN80, DIN 110, DIN 140 (DIN43653) OESAZX2-S2 OESAZX2-S2/4
Flush-end, 50mm and 70mm body OESAZX2-S3 OESAZX2-S3/4
French OESAZX2-S5 OESAZX2-S5/4
Flush end
French with micro switches OESAZX2-S6 OESAZX2-S6/4
19
Handles and shafts — see pages 19.30 - 19.32.
Selecting the right fusible disconnect for HSF fuses may be difficult. Due to UL restrictions it is not possible to give a general
fuse selection table for your use. Therefore we ask you to contact ABB Inc., in application issues. Information needed is nominal
current of the application and catalog number of the fuse.
1 Consult Factory.


ct
ne s
n
o e
sc h
Other configurations
Di witc ible High speed fuse pattern
s us
F
Standard switches

please select one switch
catalog number which
includes:
Switch body + shaft + handle
Selecting switch bodies

There are some HSF fuses that fit in standard pattern fusible disconnects, no adapter kits needed.
DIN-type fusible disconnects – 32-1200A

AC23A operational power in kW 3 Pole 4 Pole
IEC Amp rating Fuse Type Weight (kg)
400V 500V Catalog number Catalog number
32 15 18.5 DIN 000 1.3 OS32GD03 OS32GD04F
63 30 37 DIN 000 1.3 OS63GD03 OS63GD04F
160 75 90 DIN 000, 00 1.5 OS160GD03 OS160GD04F
250 145 170 DIN 0, 1 4.3 OS200D03 OS200D04F
400 230 280 DIN 0, 1, 2 7.1 OS400D03 OS400D04F
630 355 450 DIN 3 13.6 OS630D03 OS630D04F
800 450 560 DIN 3 13.6 OS800D03 OS800D04F
1200 560 710 DIN 4 46 OS1250D03 OS1250D04F
DIN 43620
NFC-style Fusible disconnects – 25-125A

25 11 15 NFC 10x38 0.7 OS25FF1210 OS25FF2210F
32 15 18.5 NFC 14x51 0.7 OS32FF1214 OS32FF2214F
NFC Style 50 22 30 NFC 14x51 1.3 OS50GF12 OS50GF22F
125 55 75 NFC 22x58 1.5 OS125GF12 OS125GF22F
BS-types fusible disconnects – 32-1200A

32 15 18.5 A2,A3 1.3 OS32GB03 OS32GB04N1
63 30 37 A2,A3 1.3 OS63GB03 OS63GB04N1
100 55 55 A2, A3, A4 1.5 OS100GB03 OS100GB04N1
160 75 90 A2, A3, A4 1.5 OS160GB03 OS160GB04N1
200 145 170 B1-B2 3.3 OS200B03 OS200B04N2
400 230 280 B1-B4 7.1 OS400B03 OS400B04N2
630 355 450 C1-C2 13.6 OS630B03 OS630B04N2
800 450 560 C1-C3 13.6 OS800B03 OS800B04N2
1250 560 710 D1 46 OS1250B03 OS1250B04N2
19

Di
s
sw con
Disconnect switch accessories Ac itc ne
ce he ct
Non-fusible & fusible ss s
ori
Non-fusible & fusible disconnect switch es
IO
N
Accessories
19

ct
n ne s
o e s
sc h Standard handles & shafts 12
Di witc sorie
s es
c
Ac
OHBS2AJ1 OHB__J6 OHY__J6 YASDA-8 OHM125L12 OHB4
Recommended handles & shafts

Recommended standard pistol Maximum recommended
Amperes Shaft diameter
handle length shaft length
16 - 100 6x6 mm - .24 x .24" 45 - 65 mm 290 mm
200 6x6 mm - .24 x .24" 65 - 80 mm 290 mm
400 - 1200 12x12 mm - .47 x .47" 125 - 274 mm 595 mm
1600 - 3150 12x12 mm - .47 x .47" 175 - 330 mm 595 mm
Selector handles — for use with .24 x .24" (6mm) OXS6X_shafts

UL/NEMA Type IEC type Color Marking Defeatable Padlockable Weight (lbs) Catalog number
— — 0.09 OHBS1AH1 3
1 IP54 Black O/I & Off/On
— Yes 0.12 OHBS3AH1 3
— Yes 0.16 OHBS2AJ1 3
1, 3R, 12 IP65 Black O/I & Off/On
Yes Yes 0.16 OHBS2AJ 3
Pistol handles — for use with .24 x .24" (6mm) OXP6X_ shafts
UL/NEMA Type IEC type Color Marking Length in/mm Defeatable Padlockable Weight (lbs) Catalog number
O/I & Off/On 2.6/65 Yes Yes 0.29 OHB65J6
1, 3R, 12 IP65 Black Off/On/Test 2.6/65 Yes Yes 0.29 OHB65J6T 4
O/I & Off/On 3.1/80 Yes Yes 0.30 OHB80J6
2.6/65 Yes Yes 0.29 OHB65L6
1, 3R, 12, 4, 4X IP66 Black O/I & Off/On
3.1/80 Yes Yes 0.30 OHB80L6
1, 3R, 12, 4, 4X IP66 316L Stainless steel O/I & Off/On 2.6/65 Yes Yes 1.60 OHM65L6
1, 3R, 12 IP65 Black w/ 316 stainless hasp O/I & Off/On 2.6/65 Yes Yes 0.31 OHB65J6EH
1, 3R, 12, 4, 4X IP66 Black w/ 316 stainless hasp O/I & Off/On 2.6/65 Yes Yes 0.31 OHB65L6EH
Pistol handles — for use with .47 x .47" (12mm) OXP12X_ shafts
IEC
UL/NEMA Type Color Marking Length in/mm Defeatable Padlockable Weight (lbs) Catalog number
type
Black 4.9/125 Yes Yes 0.39 OHB125J12
1, 3R, 12 IP65 O/I & Off/On
Black T-Handle 7.9/200 Yes Yes 0.88 OHB200J12P
Black Steel Reinforced 10.8/274 Yes Yes 1.19 OHB274J12
Black Steel Reinforced 13/330 Yes Yes 1.28 OHB330J12
Black 5.7/145 Yes Yes 0.39 OHB145L12
Black 6.9/175 Yes Yes 0.41 OHB175L12
1, 3R, 12, 4, 4X IP66 Black T-Handle O/I & Off/On 7.9/200 Yes Yes 0.88 OHB200L12P
Black Steel Reinforced 10.8/274 Yes Yes 1.19 OHB274L12
Black Steel Reinforced 13/330 Yes Yes 1.28 OHB330L12
19 1, 3R, 12, 4, 4X IP65 Metal Off/On 8.7/220 -- Yes 1.50 YASDA-8
4.9/125 Yes Yes 1.7 OHM125L12
316L Stainless Steel 6.9/175 Yes Yes 1.8 OHM175L12
1, 3R, 12, 4, 4X IP66 O/I & Off/On
10.8/275 Yes Yes 2.1 OHM275L12
T-Handle 7.9/200 Yes Yes 0.88 OHM200L12P
4.9/125 Yes Yes 0.44 OHB125J12EH
1, 3R, 12 IP65 Black w/ 316 stainless hasp O/I & Off/On
6.9/175 Yes Yes 0.76 OHB175J12EH
4.9/125 Yes Yes 0.44 OHB125L12EH
1, 3R, 12, 4, 4X IP66 Black w/ 316 stainless hasp O/I & Off/On
6.9/175 Yes Yes 0.76 OHB175L12EH
1 Red/Yellow handles are available by substituting the OHB prefix with OHY.
2 All handles are plastic unless otherwise noted as metal or stainless steel.
3 Not recommended for use on OT30/60/100.
4 The OS30_ switch has a TEST position, accessed by rotating the mechanism 45 degrees counterclockwise from the OFF position. In the TEST position, optional auxiliary contacts, OA4B1C, are
actuated but the main switch contacts are not.

Di
s
sw con
Standard handles & shafts 2 Ac itc ne
ce he ct
ss s
ori
es
Direct mount handle for non-fusible switches

Shaft Shaft Switch
Description For use on Color Padlockable Weight
through handle catalog number catalog number
OHBS12 3
OT16-40 Black Yes Yes 0.05
CXBY68989
Mounts directly on switch.
OT63-80 OHBS23
No shaft necessary
Black Yes No 0.05 CXBY68998
OT30/60/100
CXBY68419/6/2M
OT200 Black Yes No 0.22 OTV250EK
OT400 Black Yes Yes 0.44 OTV400EK
Up to 3 padlocks in OFF-position,
includes shaft and mechanism
Mounts on shaft OETL-NF1600-OETL-NF3150 Metal No Yes 0.80 YASDA-34
Direct mount handle for fusible switches

For use on Description Marking Color Padlockable Weight Catalog number
OS30 No shaft required O/I/Test Black Yes 0.10 OHBS5
OS60 - OS200 No shaft required O/I Black Yes 0.30 OSV200BK
OS400 No shaft required O/I Black Yes 0.30 OSV400BK
OS600 No shaft required O/I Black Yes 0.30 OSV800BK
OS400-600, OES800 Mounts on 12mm shaft — Metal No 0.78 YASDA-33
3 Position selector handles for double throw switches

Weight Catalog
UL/NEMA Type IEC Type Markings Color Defeatable Padlockable
(Lbs.) number
1, 3R, 12 IP65 I/0/II, ON/OFF/ON Black Yes Yes 0.16 OHBS2AJE011
3 Position pistol handles for double throw switches

Weight Catalog Catalog
UL/NEMA Type IEC Type Markings Color Defeatable Padlockable
(Lbs.) number number
1, 3R, 12 IP65 Black Yes Yes 0.29 OHB65J6E011 OHB145J12E011
1, 3R, 12, 4, 4X IP66 I/0/II, ON/OFF/ON Black Yes Yes 0.29 OHB65L6E011 OHB145L12E011
1, 3R, 12 IP65 Black Yes Yes 0.3 OHB80J6E011 OHB175J12E011
1, 3R, 12, 4, 4X IP66 Black Yes Yes 0.3 OHB80L6E011 OHB175L12E011
Selector handles for door mounted switches 1

Catalog
UL/NEMA Type IEC Type Color Defeatable Padlockable Weight (lbs)
number
Snap-on mounting - for use on OT16FT3 - OT40FT3
1 IP54 Black — — 0.10 OHBS1PH
1 IP54 Black — Yes 0.13 OHBS3PH
1, 3R, 12 IP65 Black — Yes 0.17 OHBS2PJ
Screw mounting - for use on OT16FT3 - OT100FT3. For OT30, OT60, and OT100 use OH_ _2_ only
1 IP54 Black — — 0.11 OHBS1RH
1 IP54 Black — Yes 0.14 OHBS3RH
1, 3R, 12 IP65 Black — Yes 0.18 OHBS2RJ
19
1 Red/Yellow handles are available by substituting the OHB prefix with OHY.
2 All handles are plastic unless otherwise noted as metal or stainless steel.
3 Suitable for 3 & 4 pole versions only. Not for use with 6 or 8 pole or double throw configurations.

ct
ne s
n
o e s
sc h
Standard handles & shafts
Di witc sorie
s es
c
Ac
OXP6X
OXS6X__ OXP12X_
Shafts for use with selector handles – .24 x .24" (6x6 mm)
Maximum Mounting Depth (inches) 1
Shaft length (in/mm)

OT16F3, OT25F3, OT40F3 OT63F3, OT80F3 Catalog
OS30 2 Weight
number
OH_1_ & OH_3_ OH_2_ OH_1_ & OH_3_ OH_2_
3.3/85 5.0 4.3 5.6 5.0 – 0.07 OXS6X85
4.1/105 5.8 5.1 6.4 5.8 – 0.07 OXS6X105
4.7/120 6.4 5.8 7.0 6.4 – 0.08 OXS6X120
5.1/130 6.7 6.1 7.4 6.8 5.6 0.08 OXS6X130
7.1/180 8.7 8.1 9.4 8.7 6.1 0.11 OXS6X180
9.8/250 11.5 10.8 12.1 11.5 10.3 0.13 OXS6X250
13/330 14.6 14.0 15.3 14.7 13.4 0.17 OXS6X330
Shafts for use with pistol handles – .24 x .24" (6x6 mm)
Maximum Mounting Depth (inches)
Catalog
Shaft length (in/mm) Weight
number
OT16F3 - OT40F3 OT63F3 - OT80F3 OT30F3/60F3/100F3 OT200 OS30 OS60 OS100 OS200
5.2/130 5.9 6.4 6.7 6.5 – – – – 0.08 OXP6X130
5.9/150 6.7 7.4 7.0 7.2 8.9 9.7 9.8 9.9 0.09 OXP6X150
8.3/210 9.1 9.7 9.8 9.6 9.7 12.1 12.2 13.0 0.13 OXP6X210
11.4/290 12.2 12.8 12.9 12.7 13.4 15.2 15.3 – 0.18 OXP6X290
14.2/360 14.9 13.8 15.6 15.5 18.7 12.9 18.0 – 0.23 OXP6X360
16.9/430 17.6 18.3 18.3 18.2 22.6 20.6 20.7 – 0.27 OXP6X430
Shafts for use with pistol handles – .47 x .47" (12x12 mm)
Shaft length (in/mm) Maximum Mounting Depth (inches)

Catalog
Weight
number
OETL-NF1600 -
OT400 OT600 OT800 - OT1200 OS400 OS600 - OS1200
OETL-NF3150
11.0/280 13.3 14.6 14.5 — 13.8 14.9 0.77 OXP12X280
12.8/325 15.0 16.4 16.3 20.9 15.6 16.7 0.90 OXP12X325
15.6/395 20.5 19.1 19.1 23.6 18.3 19.4 1.10 OXP12X395
19 18.3/465 21.9 21.8 21.9 26.3 21.0 22.1 1.32 OXP12X465
21.1/535 22.8 24.6 24.6 29.1 23.8 24.8 1.54 OXP12X535
1 Mounting depth is distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length.
2 Selector handles and shafts are not recommended for use with fusible switches over 30A.

Di
s
sw con
Auxiliary contacts Ac itc ne
ce he ct
ss s
ori
es
(N)7
L4 N N N PE
(N)8 N N N PE
OT16E
3
I
ON T4
O
OFF
Auxiliary contacts — snap-on mounting 1

AC Thermal
Description For Use On Weight AC rated voltage Catalog number
amp rating
Form C 1 N.O. & 1 N.C. OS30 2 0.04 6 250 OA4B1C
OT16-100, OT200-1200
1 N.O. 0.07 10 600 OA1G10
OS30-OS1200
OT16-100 0.07 10 600 OA1G01
1 N.C. OT200-1200
0.07 10 600 OA3G01
OS30-OS1200
1 N.O. & 1 N.C. OT16-100 0.07 10 600 OA2G11
OS30 0.09 – – OSZA
Module for auxiliary
OT200-1200
contacts 0.1 – – OEA28
OS200-OS1200
OEA28
Auxiliary contacts — front mounting 3

AC Thermal
Description For Use On Weight AC rated voltage Catalog number
amp rating
1 N.O. + 1 N.C. 0.2 10 600 OZXK-1
2 N.O. + 2 N.C. 0.26 10 600 OZXK-2
OETL-NF1600
4 N.O. + 4 N.C. 0.4 10 600 OZXK-3
through
2 N.O. 0.18 10 600 OZXK-4
OETL-NF3150
OA1G__ 4 N.O. 0.25 10 600 OZXK-5
8 N.O. 0.4 10 600 OZXK-6
Auxiliary contacts — snap-on mounting for double throw

Weight AC Thermal AC rated
Description For Use On Catalog number
(Lbs.) amp rating voltage
1 N.O. OT16-100_C 0.7 10 600 OA7G10
1 N.C. OT16-800_C 0.7 10 600 OA3G01
1 N.O. OT200-800_C 0.7 10 600 OA1G10
Mounting & installation considerations

Non-Fusible
OA2G11
OA1G10 (1 N.O.) mounts on right side of switch only
OA1G01 (1 N.C.) mounts on left side of switch only
OT16-100
OA2G11 (1 N.O. & 1 N.C.) mounts on left of right side of switch
Maximum two contacts on each side of switch 19
Maximum 8 auxiliary contact blocks with the OEA28 module
OT200-1200
Maximum 4 auxiliary contact blocks mounting under the mechanisms
Fusible
Form C contacts mount directly to switch
Maximum two Form C contacts
OS30
OA1G10 (1 N.O.) + OA3G01 (1 N.C.) require mounting base
Maximum 6 OA1G10 + OA3G01 contacts with mounting base OSZ4
Mounting to left side of switch with OEA28 module: Maximum 8 contact blocks
OS60-1200
Mounting under mechanism cover: Maximum 4 contact blocks
1 UL file #E83510
2 Not suitable for use on cable operated flange version of OS100
3 UL File #E5707

ct
n ne s
o e s
sc h
Terminal lugs
Di witc sorie
s es
c
Ac
Terminal lugs 1
For Use On Wire Size Wire Type Lugs/Kit Weight (lbs) Catalog number
OS100 #14-2/0 Cu/Al 6 0.50 OZXA-24 2
#4 - 300 kcmil 6 0.50 OZXA-200
OT200/OS200 #4 - 300 kcmil Cu/Al 3 0.25 OZXA-200/3
(6) 14-6 AWG 3 0.25 OZXA-206T
OZXA-400 #2 - 600 kcmil 6 0.50 OZXA-400
OZXA-27 #2 - 600 kcmil 3 0.25 OZXA-400/3P
OT/OS400 Cu/Al
(2) #4 - 300 kcmil 6 0.50 OZXA-402
(6) #14 - 6 AWG 3 0.50 OZXA-406
(2) #2 - 600 kcmil 6 0.50 OZXA-800
OT600 , OS600 - OS800 Cu/Al
(2) #2 - 600 kcmil 3 0.50 OZXA-800/3
(4) #2 - 600 kcmil 6 6.90 OZXA-1200
OT800, OT1200 & OS1200 Cu/Al
(2) #2 - 600 kcmil 3 3.45 OZXA-1200/3
(4) #2 - 600 kcmil 6 10.44 OZXA-28
OETL-NF1600 (4) #2 - 600 kcmil Cu/Al 3 5.22 OZXA-28/3
OZXA-30
(8) 2/0 + (2) #2 - 600 kcmil 3 3 10.44 OZXA-32
OETL-NF2000-3150 (8) #2 - 600 kcmil Cu/Al 12 20.88 OZXA-28/2
OZXA-32
Terminal lug kits for double throw switches

Weight Catalog
For Use On Wire Size Wire Type Lugs/Kit
(Lbs) number
#4 - 300kcmil 9 0.5 OZXA-200/9
OT200_C Cu/Al
#4 - 300kcmil 12 0.25 OZXA-200/12
#2 - 600kcmil 9 0.5 OZXA-400/9
OT400_C Cu/Al
#2 - 600kcmil 12 0.25 OZXA-400/12
OZXA-175/400
(2) #2 - 600kcmil 9 0.5 OZXA-800/9
OT600_C Cu/Al
(2) #2 - 600kcmil 12 0.5 OZXA-800/12
(4) #2 - 600 kcmil 9 0.5 OZXA-1200/9
OT800_C Cu/Al
(2) #2 - 600 kcmil Cu/Al 12 0.5 OZXA-1200/12
OZXA-24
OZXA-27
19
OZXA-175/400
1 Lugs are integral to the switch for 16-125A. No separate lug kit accessory is required.
2 Not suitable for use on cable operated flange version OS100.
3 A load side distribution lug eliminates the need to purchase, install and wire a separate distribution block.

Di
s
Terminal shrouds sw con
Ac itc ne
ce he ct
ss s
ori
es
Terminal shrouds for non-fusible

Description For Use On Weight Catalog number
OT16-OT40 2 0.02 OTS40T3
3 pole
OT63-OT80 2 0.02 OTS80T3
includes one shroud for line or load side
OT30-OT100 2 0.02 OTS125T3
OTPS40FPN1 2 0.03 OTS40T1
4th pole
OTPS80FP 2 0.03 OTS80T1
includes one shroud for line or load side
OTPS125FP 2 0.03 OTS125T1
3 pole long type shrouds 0.12 OTS250G1L/3
OTS250G1L/3
3 pole short type shrouds 0.13 OTS250G1S/3
OT200
4 pole long type shrouds 0.26 OTS250G1L/4
4 pole short type shrouds 3.18 OTS250G1S/4
3 pole OT400 0.33 OTS403
includes one shroud for line or load side 1 OT600 0.33 OTS603
3 pole OT800 0.88 OTS803
OTS250G1S/3 includes one shroud for line or load side 1 OT1200 1.2 OTS1203
Terminal shrouds for fusible

Weight Catalog
Description For Use On
(Lbs.) number
Terminal shroud for one pole OS100 0.04 OSS160T1
OTS40T3 OTS40T1 Terminal shroud for 3 poles OS100 0.04 OSS160T3
OTS80T3 OTS80T1
OTS125T3 OTS125T1
3 pole long type shrouds OS200 0.20 OSS200G1L/3
3 pole short type shrouds OS200 0.13 OSS200G1S/3
4 Pole long type shrouds OS200 0.26 OSS200G1L/4
4 pole Short type shrouds OS200 0.18 OSS200G1S/4
OS400 0.13 OSS403
3 Pole includes one shroud for line or load side 1 OS600 0.11 OSS603
3 pole short type shrouds 0.47 OSS800G1S/3
3 pole long type shrouds 1.54 OSS800G1L/3
OS800
OS1200
OSS160T3 4 pole short type shrouds 1.15 OSS1200G1S/4
OSS200G1S/3
OSS200G1L/3
19
1 For 4 pole shrouds, please consult factory.

2 ABB OT16 - OT100 switches are IP20 touchsafe as standard. Terminal shrouds provide an extra degree of protection.

ct
ne s
n
o e s
sc h
Additional poles
Di witc sorie
s es
c
Ac
Additional poles for non-fusible 1

Power poles - Only one power pole per switch: mounts on left or right side of switch. (OTPS40FPN1 mounts to left side only.)
AC Thermal AC rated
Description For use on Weight Catalog number
amp rating voltage
OT16-OT40 0.07 40 OTPS40FPN1
OT30-OT60 0.13 60 OTPS60FP
Fourth Pole 600
OT63-OT80 0.13 80 OTPS80FP
OT100 0.31 100 OTPS125FP
OT16-OT40 0.07 40 OTPL40FP
Late-break/ OT30-OT60 0.13 60 OTPL60FP
600
early-make OT63-OT80 0.13 80 OTPL80FP
OTP_40FP OT100 0.31 100 OTPL125FP
Terminal poles - Switch accepts one terminal pole per side: mounts on left or right side of switch
AC Thermal AC rated
Description For use on Weight Catalog number
amp rating voltage
OT16-OT40 0.07 40 OTPN40FP

OT30-OT60 0.13 60 OTPN60FD
Solid neutral 600
OT63-OT80 0.13 80 OTPN80FP
OT30-OT100 0.31 100 OTPN125FP
OT16-OT40 0.07 40 OTPD40FP
OTP_80FP OT30-OT60 0.13 60 OTPD60FP
Detachable Neutral 600
OT63-OT80 0.13 80 OTPD80FP
OTP_125FP OT100 0.31 60 OTPD125FP
OT16-OT40 0.07 40 OTPE40FP
OT30-OT60 0.13 60 OTPE60FP
Ground Terminal 600
OT63-OT80 0.13 80 OTPE80FP
OT100 0.31 100 OTPE125FP
Additional poles for fusible

Weight AC Thermal amp Catalog
Description For use on AC rated voltage
(Lbs.) rating number
OS30 0.45 30 600 OESA-ZX171
Detachable neutral mounts
OS60 0.13 63 600 OSZ1
on side of switch or DIN rail
OS100 0.31 125 600 OSZ2
OESA-ZX171
19
1 Switches accept only one power pole or one terminal pole per side. Only one power pole per switch.

Di
s
Fuse monitors & carriers sw con
Ac itc ne
ce he ct
ss s
ori
es
Fuse monitors
Blown fuse indicators/monitors
For Use With Rated Voltage Weight (lbs) Catalog number
100-240 0.31 OFM240
OS30-1200
380-600 0.31 OFM600
Suitable for 1 or 3 phase circuits. Includes 1 N.O. and 1 N.C. auxiliary contacts and red & green LED lights for indication.
OFM_
Fuse Monitor Mounting Accessories
For Use With Crimp Terminal size (mm) Catalog number
OS30-200 2.8-0.8 OFMZX2
OS400-1200
6.3-0.8 OFMZX4
Includes 6 crimp terminals
OSC60J_ CXBY68362
Fuse carriers/covers
Description For Use on Catalog number
CC fuse carrier (Qty. 1) OS30AFCC_ OESAZD48
J fuse carrier (Qty. 1) OS30AFJ_ OESAZD28
Solid link carrier (Qty. 1) OS30_ OESAZD55
Shorting bars for fusible switches

AC thermal amp
Description For Use On AC rated voltage Catalog number
rating
Dummy Fuse OS60 60 600 OESA-ZD54
OS100 100 600 OESA-ZS36
Solid links: metal strap
OS200 400 600 OESA-ZK98
19

ct
ne s
n
o e s
sc h
Miscellaneous accessories
Di witc sorie Replacement parts
s es
c
Ac
Miscellaneous accessories
Shaft accessories
Accessory Type Description For Use On Weight Catalog number
Adapts one end of a 6mm shaft to 12mm

Shaft Adapter 6mm shafts 0.20 OETL-ZK19
(use with shaft extension coupler)
Shaft Extension Joins two shafts together for applications where extended 6mm shafts 0.26 OESA-ZX167
Coupler length is required 12mm shafts 0.26 OETL-ZX95
Fits all pistol grip handles, mounts on the inside of the
Shaft Guide pistol handles - OHZX10
enclosure door with provided hardware
Busbar connections
OETL-ZT80_ Accessory Type Description For Use On Weight Catalog number
Busbar OETL-NF1600 46.2 OETL-ZX115
Connections Vertical, back or edgewise mounting 1 – 3150 31.0 OETL-ZX114
Locking accessories
Accessory Type Description For Use On Weight Catalog number
OS60-OS200 0.25 OETL-ZW16

For Kirk Key, Castell, Low & Fletcher and Ronis interlock. For
Cam Attachment OS400-
adapting to the interlock system. The interlock is not included. 0.29 OETL-ZW5
OS1200
OETL-ZX115 Closed circuit principle for interlocking the switch movement.

When the coil circuit is dead, A-types cannot be operated to
OETL-NF800
O-position and L-types cannot be operated to ON- or OFF- OETL-ZT80A∆
Electrical Interlock – 3150A, 2.42
position. Coil voltages 110VAC, 220 VAC, 24VDC, 48VDC, OETL-ZT80L∆
OES800
60VDC, 110VDC, 220VDC, P - 15W U = 0.7 - 1.1 Un
(U = coil voltage, Un = nominal voltage)
∆ = Coil Voltage
OETLZX114
Replacement parts
Accessory Type Description For Use On Catalog number
Non-fusible
Replaces original black knob
Metal collar OT16-200, OS30-200 OTZS2
for locking shaft in place
OT16-200
Set screw Set screw for use with knob or collar FLSWM5X8AX
OS30-200
OTZS2
Shaft set screw Shaft set screw, bag of 10 OT400-1200 OZX1
Fusible
Terminal cover Covers terminal below fuse carrier OS30 CXBY67121
Phase barrier – OS200 CXBY68794
– OS30_ FLSWM5X8AX
Shaft Set Screw
Bag of 10 OS400-1200 OZX1
19
1 Vertical busbar is provided as standard on OETL-NF1600 through OETL-NF3150 switches.

Di
s
Conversion, transfer & bypass mechanisms sw con
Ac itc ne
ce he ct
Mechanical interlocks ss s
ori
es
Conversion mechanisms
Mechanism Type For use on Weight UL/Nema Type Catalog number
OT16-100 0.33 - OTZW8
OT160 1.52 - OETL-ZK19
6 or 8 pole mechanisms
OT200 1.52 - OESA-ZW2
OT400 – OETL-NF1200 2.42 - OETL-ZW9
1, 3R, 12 OESA-ZW1
OT16 - 160 2.20
1, 3R, 12, 4, 4X OESA-ZW1X
Double throw mechanisms 1, 3R, 12 OTZW25
OT200 2.20
1, 3R, 12, 4, 4X OTZW25X
OTZW8
OT400 – OETL-NF1200 10.10 1, 3R, 12, 4, 4X OETL-ZW12
1, 3R, 12 OTZW17
OT16-OT100 1.54
1, 3R, 12, 4, 4X OTZW17X
Bypass mechanisms
OT200 7.28 1, 3R, 12 OTZW26
OT400 – OETL-NF1200 8.81 1, 3R, 12, 4, 4X OETL-ZW13
OT16-OT100 0.33 - OTZW24
OT160-200 0.55 - OTZW10
Mechanical interlock mechanisms
OT400 – OETL-NF800 1.26 - OETL-ZW3
OETL-NF1200 – OETL-NF3150 2.64 - OETL-ZW15
6 or 8 pole
6 (8) pole mechanism allows two switches
IO
N
2
controlled by one handle to open or close POS. O POS. I
simultaneously. SW. A O X
Equipment required for a complete installation: SW. B O X
• One conversion mechanism
X = Closed
• Two disconnect switches (see page 19.11)
O = Open
• One handle1 (see page 19.30)
• Two shafts (see page 19.32)
OTZW6
2
Transfer
Transfer mechanism manually transfers POS. I POS. O POS. II
between two power sources using two SW. A X O O
switches and a center OFF position.
SW. B O O X
A 3-position handle is included.
Shafts included. Equipment required for X = Closed
a complete installation: O = Open
• Two disconnect switches (see page 19.11.)
Bypass 2
Bypass mechanism operates three switches: POS. I POS. O POS. II
Two switches in series and one changeover SW. A O O X
switch to allow power bypass.
A 3-position handle is included. SW. B O O X
Shafts included.Equipment required for a SW. C X O O
complete installation: X = Closed
• One conversion mechanism O = Open
• Three disconnect switches (see page 19.11.)
OTZW17 Mechanical interlock 19

Mechanical interlock mechanism prevents both
switches from being in the ON position at the SW. A SW. B
1
same time. POS. I POS. I
Equipment required for a complete installation: SW. A X O
SW. B O X
• Two disconnect switches (see page 19.11)
X = Closed
• Two handles (see page 19.30)
O = Open
• Two shafts (see page 19.32)
OETL-ZW24
1 OT16E3 – OT32E3 can use a selector or pistol handle. All other sizes must use a pistol handle.
2 = Three poles

Di
s
Enclosed disconnect switches sw con
En itch nect
16A – 3150A Non-fusible clo es
se
30A – 1200A Fusible d
Disconnect switches
eOT, NF and FJ's meet customer requirements in terms of safety, ease of

installation, space savings and operational convenience. They are available in
a wide range of amperage ratings, are UL approved and NEMA rated to satisfy
rugged industrial environments.
Enclosed
19

ct
ne s
n
o e
sc h
General information
Di witc sed Non-fusible, fusible & lockable
s clo
En
Non-fusible
Modern appearance
Snap on accessories include addi-
tional poles, auxiliary contacts, etc.
Quick make, quick brake
mechanism
Enclosures available in plastic, metal,
or stainless steel in NEMA 1, 3R, 12, Heavy duty disconnect, 600VAC
4X, 7 & 9 environmental categories
Extremely compact size
Finger-proof construction. No haz-

ardous exposed parts
3/4/6/8 pole constructions; transfer

switches and by-pass switches
available
Fusible
Snap on accessories include fuse Modern appearance

monitors, auxiliary contacts, etc. Quick make, quick brake
mechanism
Enclosures available in plastic, metal,
or stainless steel in NEMA 1, 3R, 12, Heavy duty disconnect, 600VAC,
4X, 7 & 9 environmental categories 200kA, Isc
Extreme compact size as fuse carri-
ers are decked above contacts
Double contacts enabling feed from
any direction and preventing back
feed
Finger-proof construction. No haz-
ardous exposed parts
3/4/6/8 pole constructions; transfer
switches and by-pass switches
available
Lockable
Clear position indications:

I-ON Door interlocked when handle is in
O-OFF ON position. Door interlock can be
19 defeated by authorized personnel.
Door interlocked when handle pad-
locked to OFF position Pilot devices can be added
Handle padlockable with up to three

padlocks

Di
s
sw con
General information En itch nect
Non-fusible, 16A - 3150A clo es
se
d
Fusible, 30-1200A
Switch ratings, 16 – 3150 Amps, 600V
UL Maximum horsepower rating
General
purpose Single phase Three phase
Wire size for terminal lugs For wire type Approval
amp rating 120V 200V 240V 200V – 208V 240V 480V 600V
16 1 2 2 3 5 10 10 #18 – 8 Cu UL
25 1.5 3 3 7.5 7.5 15 20 #18 – 8 Cu UL
UL 508
40 2 5 5 10 10 20 25 #18 – 8 Cu UL
60 2 5 5 15 15 30 30 #14 – 1 Cu UL
80 2 5 5 20 20 40 40 #14 – 1 Cu UL
30 2 5 5 10 10 20 30 #14 – 4 Cu UL
60 3 7.5 7.5 20 20 40 40 #14 – 4 Cu UL
100 5 15 15 25 30 50 50 #8 – 1/0 Cu UL
125 7.5 20 20 30 30 75 100 #8 – 1/0 Cu UL
200 –– –– –– 60 75 150 200 #6 – 300 kcmil Cu UL
UL 98
400 –– –– –– 100 125 250 350 #2 – 600 kcmil Cu UL

600 –– –– –– 150 200 400 500 (2) #2 – 600 kcmil Cu UL
800 –– –– –– 200 250 500 600 (2) #2 – 600 kcmil Cu/Al UL
1200 –– –– –– –– –– –– –– (4) #2 – 600 kcmil Cu/Al UL
1600 –– –– –– –– –– –– –– (4) #2 – 600 kcmil Cu/Al UL
2000 –– –– –– –– –– –– –– (8) #2 – 600 kcmil Cu/Al UL
3150 1 –– –– –– –– –– –– –– (8) #2 – 600 kcmil Cu/Al IEC
Handle ratings
Catalog number Style Catalog
NEMA Color Marking Defeatable Padlockable
suffix type number
S Selector 1,3R,12 Black O/I & OFF/ON Yes Yes OHBS2AJ
S1 Selector 1,3R,12 Red/Yel O/I & OFF/ON Yes Yes OHYS2AJ
P Pistol 1,3R,12 Black O/I & OFF/ON Yes Yes OHBS65J6
P Pistol 1,3R,4,4X,12 Black O/I & OFF/ON Yes Yes OHBS65L6
P1 Pistol 1,3R,12 Red/Yel O/I & OFF/ON Yes Yes OHYS65J6
P1 Pistol 1,3R,4,4X,12 Red/Yel O/I & OFF/ON Yes Yes OHYS65L6
BJ Selector 1,3R,12 Black O/I & OFF/ON Yes Yes OHBS2AJ
YJ Selector 1,3R,12 Red/Yel O/I & OFF/ON Yes Yes OHYS2AJ
B4 Pistol 1,3R,12 Black O/I & OFF/ON Yes Yes OHB145J12
B4 Pistol 1,3R,12 Black I/O/II Yes Yes OHB145J12E011
B4 Pistol 1,3R,4,4X,12 Black I/O/II Yes Yes OHB145L12E011
Y4 Pistol 1,3R,12 Red/Yel O/I & OFF/ON Yes Yes OHY145J12
B6 Pistol 1,3R,4,4X,12 Black O/I & OFF/ON Yes Yes OHBS65J6
Y6 Pistol 1,3R,4,4X,12 Red/Yel O/I & OFF/ON Yes Yes OHYS65L6
B7 Pistol 1,3R,4,4X,12 Black O/I & OFF/ON Yes Yes OHB175J12
Y7 Pistol 1,3R,4,4X,12 Red/Yel O/I & OFF/ON Yes Yes OHY175L12
B8 Pistol 1,3R,4,4X,12 Black O/I & OFF/ON Yes Yes OHB80L6
Y8 Pistol 1,3R,4,4X,12 Red/Yel O/I & OFF/ON Yes Yes OHY80L6
6 Pistol 1,3R,4,4X,12 Black I/O/II No Yes OHB174L12E011
8 Pistol 1,3R,4,4X,12 Metal O/I & OFF/ON No Yes YASDA-8
21 Pistol 1,3R,4,4X,12 Metal I/O/II No Yes YASDA-21
21 Pistol 1,3R,4,4X,12 Black I/O/II No Yes OHB274L12E011
19
1 IEC rated only.

2 Switches are for double throw.

ct
ne s
n
o e
sc h
General information
Di witc sed Fusible, 30A – 1200A
s clo
En
Switch ratings
Maximum horsepower rating
UL general
purpose Single phase Three phase Wire size for terminal lugs For wire type Approval 1

amp rating 120V 200V 240V 200V 208V 240V 480V 600V
30 2 3 5 5 7.5 7.5 15 20 #18 – 8 Cu CSA, UL
60 3 7.5 10 15 15 15 30 50 #14 – 4 Cu CSA, UL
100 5 10 15 25 25 30 60 75 #14 – 2/0 Cu/Al CSA, UL
200 — — — 50 50 60 125 150 #6 – 300 kcmil Cu/Al CSA, UL
UL 98
400 — — — 100 125 125 250 350 #2 – 600 kcmil Cu/Al CSA, UL
600 — — — 150 150 200 400 500 (2) #2 – 600 kcmil Cu/Al CSA, UL
800 — — — 200 200 250 500 600 (2) #2 – 600 kcmil Cu/Al CSA, UL
1200 — — — — — — — — (4) #2 – 600 kcmil Cu/Al CSA, UL
Enclosed non-fused, 3 poles, 16 to 100 A
EOT 16 U 3 M 1 - 1 P
Size and Amps Poles Enclosure Type Auxiliary contact Handle

16 = 16A 3 P = Plastic 1 = Type 1 [Blank] – None P = Pistol Black
30 = 30A S = Stainless steel 3 = Type 3R/12 0 = 1 N.C. S = Selector Black
32 = 40A M = Sheet steel 4 = Type 4/4X 1 = 1 N.O. M = Metal (OHM...)
45 = 60A
60 = 60A
63 = 80
100 = 100A
Enclosed non-fusible, 200 - 1200 A and specialty configurations
NF 200 1 - 6 P B6 C
Style Amps Type Poles Configuration Handle Revision

EOT - Non-fused (16-100A) 200 1 = Type 1 3 P = Standard B = Black 1
NF - Non-fused (200-1200A) 400 3 = Type 3R/12 6 T = Double Throw Y = Red/Yellow 1
FJ - Fused "J" type fuses (30-800A) 600 4 = Type 4
FC -Fused "CC" type fuses (30-800A) 800 X = Type 4X
1200
1600
2000
19
Custom versions or other versions of enclosed products are available
upon request... please consult factory.
1 Fusible switches are UL listed to the UL98 standard.

Di
s
sw con
3 pole En itch nect
Non-fusible, 16A – 3150A clo es
se
d
NF32X-3PB6C EOT16U3P3-S EOT63U3M1-P
3 pole, 600V, 16-80A

Selector handle
UL general UL/NEMA Enclosure Type
purpose amp 1 3R/12 4/4X 3R/12 Plastic
rating Catalog number Catalog number Catalog number Catalog number
16 EOT16U3M1-S EOT16U3M3-S Not available EOT16U3P3-S
40 EOT32U3M1-S EOT32U3M3-S with selector EOT32U3P3-S
60 EOT45U3M1-S EOT45U3M3-S handles EOT45U3P3-S
80 EOT63U3M1-S EOT63U3M3-S EOT63U3P3-P
3 pole, 600V, 16-100A

Pistol handle
UL/NEMA Enclosure Type
UL general
purpose amp 1 3R/12 4 4X Stainless 4X Plastic 7&9
rating
Catalog number Catalog number Catalog number Catalog number Catalog number Catalog number
16 EOT16U3M1-P EOT16U3M3-P - EOT16U3S4-P EOT16U3P4-P NF167-3P
30 EOT30U3M1-P EOT30U3M3-P - EOT30U3S4-P NF30P-3PB6C NF307-3P
3 Pole, 600V, 200A – 3150A

Pistol handle
UL general
purpose amp 1 3R/12 4 4X Stainless 4X Plastic 7&9
rating
200 NF2001-3PB8B NF2003-3PB8B NF2004-3PB8B NF200X-3PB8B NF200P-3PB8B —
800 NF8001-3PB4A NF8003-3PB4A NF8004-3PB4A NF800X-3PB4A NF800P-3PB4A — 19
1200 NF12001-3PB4A NF12003-3PB4A NF12004-3PB4A NF1200X-3PB4A NF1200P-3PB4A —
1600 NF16001-3P8A NF16003-3P8A NF16004-3P8A NF1600X-3P8A — —
2000 NF20001-3P8A NF20003-3P8A NF20004-3P8A NF2000X-3P8A — —
3150 1 NF31501-3P8A NF31503-3P8A NF31504-3P8A NF3150X-3P8A — —
NOTE: All enclosed switches are provided with a black handle; however, most handles can be
substituted with a red and yellow handle if desired.
EXAMPLE: A red/yellow selector handle for an EOT16U3M1-S can be substituted for the
black selector handle by using the "S1" suffix instead of the "S" suffix, new catalog
#EOT16U3M1-S1.
1 IEC rated only.

2 New Washdown.

ct
ne s
n
o e
sc h
6 pole
Di witc sed Non-fusible, 16A – 1200A
s clo
En
6 pole, 600V, 16-1200A

Pistol handle
UL general 1 3R/12 4 4X Stainless 4X Plastic 7
purpose amp
rating
16 NF161-6PB6C NF163-6PB6C NF164-6PB6A NF16X-6PB6C NF16P-6PB6A NF167-6P

60 NF451-6PB6B NF453-6PB6B NF454-6PB6B NF45X-6PB6B NF45P-6PB6B NF457-6P
80 NF631-6PB6A NF633-6PB6A NF634-6PB6A NF63X-6PB6A NF63P-6PB6A NF637-6P
30 NF301-6PB6B NF303-6PB6B NF304-6PB6B NF30X-6PB6B NF30P-6PB6B –
60 NF601-6PB6C NF603-6PB6B NF604-6PB6B NF60X-6PB6B NF60P-6PB6B –
125 NF1251-6PB2A NF1253-6PB2A NF1254-6PB4A NF125X-6PB4A NF125P-6PB4A –
400 NF4001-6PB8B NF4003-6PB8B NF4004-6PB8B NF400X-6P8B NF400P-6P8B –
600 NF6001-6PB8B NF6003-6PB8B NF6004-6PB8B NF600X-6P8B NF600P-6P8B –
800 NF8001-6PB8A NF8003-6PB4A NF8004-6PB4A NF800X-6P8A NF800P-6P8A –
1200 NF12001-6P8A NF12003-6PB4A NF12004-6P8A NF1200X-6P8A NF1200P-6P8A –
3 Pole double throw

3 pole, 600V, 16-1200A
Pistol handle
UL general
purpose amp 1 3R/12 4 4X Stainless 4X Plastic
rating
Catalog number Catalog number Catalog number Catalog number Catalog number
16 NF161-3TB8C NF163-3TB8C NF164-3TB8C NF16X-3TB8C NF16P-3TB8A

60 NF451-3TB8B NF453-3TB8B NF454-3TB8B NF45X-3TB8B NF45P-3TB8B
80 NF631-3TB8A NF633-3TB8A NF634-3TB8A NF63X-3TB8A NF63P-3TB8A
600 NF6001-3TB4A NF6003-3TB4B NF6004-3TB4A NF600X-3TB4A NF600P-3TB4A
19

Di
s
sw con
3 Pole En itch nect
Fusible, 30A – 800A clo es
se
d
FJ30X-3PB6B
3 pole, 600V, 30-800A

Pistol handle
UL general
1 3R/12 4 4X Stainless 4X Plastic
purpose Fuse Type
amp rating Catalog Catalog Catalog Catalog Catalog
number number number number number
30 J FJ301-3PB6B FJ303-3PB6B FJ304-3PB6B FJ30X-3PB6B FJ30P-3PB6B
30 CC FC301-3PB6B FC303-3PB6B FC304-3PB6B FC30X-3PB6B FC30P-3PB6B
200 J FJ2001-3PB8C FJ2003-3PB8C FJ2004-3PB8C FJ200X-3PB8C FJ200P-3PB8C
800 L FL8001-3PB4B FL8003-3PB4B FL8004-3PB4B FL800X-3PB4B FL800P-3PB4
19

ct
ne s
n
o e
sc h
Accessories
Di witc sed Fusible
s clo
En
Auxiliary contacts
Contact Catalog
For use on:
configuration number
1 N.O. + 1 N. C.
30A OA4B1C
2 N.O. + 2 N.C.
1 N.O. OA1G10
60-1200
1 N.C. OA3G01
OA4B1C
Accessories
Installation
For use on: Description
suffix code
30A Neutral block N
60A – 100A Neutral block N
Service entrance, 3 wire U
30A – 200A
Service entrance, 4 wire V
Service entrance, 3 wire U
400A – 800A
Service entrance, 4 wire V
OA1G10
Accessories
Non -fusible
Auxiliary contacts
Contact Catalog
For use on:
configuration number
1 N.O. OA1G10
16A – 100A 1 N.C. OA1G01
1 N.O. & 1 N.C. OA2G11
1 N.O. OA1G10
200A - 1200A
1 N.C. OA3G01
1600A – 3150A 1 N.O. & 1 N.C. OZXK-1
2 N.O. & 2 N.C. OZXK-2
OA1G_
Accessories
Installation
For use on: Description
suffix code
19 EOT16, 32 Neutral or isolated ground block N or G
EOT45, 63 Neutral or isolated ground block N or G
OT30, 60, 100 Neutral or isolated ground block N or G
NF200 – 1200A Neutral block N
NF1600 – 3150A Neutral block N
NF200 – 1200A Service entrance, 3 wire U
NF200 – 1200A Service entrance, 4 wire V
OZXK_

Di
s
sw con
Technical data Te itch nect
ch es
Approximate dimensions da nica
ta l
Selecting switches per NEC

Selecting switches per NEC
Article 430 of the US National Electric Code includes two methods for properly sizing disconnect switches:
1. Single motor application 2. Combination load application

A properly sized disconnect switch for a single motor will: A properly sized disconnect switch for a combination load will
a) have an ampere rating greater than or equal to 115 percent of be selected by adding all the simultaneous individual loads in the
the rated motor full load current; or, circuit under consideration.
b) have a HP rating greater than or equal to the rated motor Using motor nameplate information, load information, and tables
HP (at applied voltage) if the disconnect switch under from section 430 of the NEC, determine one equivalent full load
consideration is HP rated. current and one equivalent locked rotor current. The equivalent
locked rotor current can be used with table 430-151 to determine
an equivalent HP rating. Select a disconnect switch:
a) greater than or equal to 115 percent of the equivalent full load
current; and,
b) greater than or equal to the equivalent HP rating.
Use of UL98 & UL508 Disconnects

According to NEC ® Article 430
To supply
Motor feeder UL98

Non-Fusible Switches
Feeder Circuit
OT30, OT60
OT100 OT200,
OT400, OT600, OT800, OT1200
OETL-NF1600 thru
UL98
Motor feeder short circuit and OETL-NF2000

ground fault protection
UL98
Fusible Switches
OS30, OS60, OS100,
Motor disconnecting means OS200, OS400, OS600
(NEC ® 430.101 - 430.113) OS800, OS1200
Motor branch-circuit
short-circuit Typical control panel
protection
(NEC ® 430.51 - 430.58) 19
Motor controller
(NEC ® 430.81 - 4.30.91)
Branch Circuit
Motor overload protection OL UL508

UL508
(NEC ® 430.31 - 4.30.44) Non-Fusible Switches

OT16, OT25, OT40,
OT63, OT80
OSHA Lockout/tagout disconnect (UL98 switches can also
be applied)
(NEC ® 430.81 - 430.91)
Motor M

ct
ne s
n
o e
sc h l
Technical data
Di witc nica OT16F3 – OT100F3
s ch
Te data UL & CSA
UL & CSA
Approvals1 2 pole N/A N/A N/A N/A N/A N/A N/A N/A
General purpose amp rating -40° to 40°C
pf = 0.7 – 0.8 A 20 30 40 60 80 30 60 100
Max. operating voltage V 600 600 600 600 600 600 600 600
Max. horsepower rating/motor FLA current,
pf = 0.4 – 0.5
Three phase
240V HP/A 5/15.2 7.5/22.0 10/28.0 15/42.0 20/54.0 10/28.0 20/54.0 30/80.0
480V HP/A 10/14.0 15/21.0 20/27.0 30/40.0 40/52.0 20/27.0 40/52.0 50/65.0
600V HP/A 10/11.0 20/22.0 25/27.0 30/32.0 40/41.0 30/32.0 40/41.0 50/52.0
Single phase 120V HP/A 1/16 1.5/20 3/24 2/24.0 2/24.0 2/24.0 3/34.0 5/56.0
240V HP/A 2/13.2 3/18.7 5/30.8 7.5/40.0 10/57.5 5/28.0 7.5/40.0 15/68.0
Short circuit rating with fuse
Fuse type
CC kA 10 — 10 —- 10 —- — — — — — — — — — —
Fuse type
J kA 10 10 10 10 10 10 100 — 100 — 200 — 200 — 200 —
Fuse type
T kA 10 10 10 10 10 10 100 — 100 — 200 — 200 — 200 —
Fuse type
RK1 kA 10 — 10 — 10 — — — — — — — — — — —
Fuse type
RK5 kA 5 5 5 5 5 5 10 5 10 5 — — — — — —
Fuse type
L kA — — — — — — — — — — — — — — — —
Fuse type
H kA — — — — — — — 5 — 5 — — — — — —
Maximum fuse size A 30 60 4 30 60 4 30 60 4 100 150 100 150 60 — 150 — 150 —
3 cycle short circuit current withstand rating 5 kA — — — — — — — —
Endurances
Min. Electrical endurance,
pf = 0.75 – 0.80 operation cycles 6000 6000 6000 6000 6000 6000 6000 6000
Mechanical endurance
operations 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000
Weight, switches 3 pole lb 0.24 0.24 0.24 0.59 0.59 0.79 0.79 0.79
4 pole lb 0.33 0.33 0.33 0.77 0.77 1.10 1.10 1.10
Dimension, switches 3 pole H in 2.68 2.68 2.68 3.60 3.60 3.94 3.94 3.94
W
in 1.38 1.38 1.38 2.07 2.07 2.76 2.76 2.76
D
in 2.20 2.20 2.20 2.85 2.85 2.95 2.95 2.95
Shaft set screw tightening torque lb. in. 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9
Shaft size — square in .24 x .24 .24 x .24 .24 x .24 .24 x .24 .24 x .24 .24 x .24 .24 x .24 .24 x .24
mm 6 x 6 6 x 6 6 x 6 6 x 6 6 x 6 6 x 6 6 x 6 6x6
Switch operating torque for lb. in. 8.8 8.8 8.8 10.5 10.5 17.5 17.5 17.5
rotary 3 pole switches
Terminal lug kits Not required
Not required Not required Not required Not required Not required Not required Not required
Wire range AWG #18 – 8 #18 – 8 #18 – 8 #14 – 4 #14 – 4 #14 – 4 #14 – 4 #8 – 1/0
Torque:
Wire tightening lb. in. 7 7 7 18 18 55 55 55

Lug mounting lb. in. Integral Integral Integral Integral Integral Integral Integral Integral
Auxiliary contacts OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _
NEMA ratings, AC
A600 A600 A600 A600 A600 A600 A600 A600
19
AC rated voltage VAC 600 600 600 600 600 600 600 600
AC thermal rated current A 10 10 10 10 10 10 10 10
AC maximum volt-ampere making VA 7200 7200 7200 7200 7200 7200 7200 7200
AC maximum volt-ampere breaking VA 720 720 720 720 720 720 720 720
NEMA ratings, DC
R300 R300 R300 R300 R300 R300 R300 R300

DC rated voltage VDC 300 300 300 300 300 300 300 300
DC thermal rated current A 1 1 1 1 1 1 1 1

DC maximum make-break VA 28 28 28 28 28 28 28 28
Torque: Wire tightening lb. in 7 7 7 7 7 7 7 7
Wire range AWG #18 – 14 #18 – 14 #18 – 14 #18 – 14 #18 – 14 #18 – 14 #18 – 14 #18 – 14
1 UL Listed switches are also CSA Approved.

2 UL98 overload test, 50 operations, pf 0.40 – 0.50 at 2x FLA.
3 Multi-tap lug available, please see page 19.34.
4 Fuse size 70A for RK5
5 When protected by any Listed fuse or Listed circuit breaker whose current rating does not exceed the maximum thermal current rating of the switch.

Di
s
sw con
ch es
OT200U03 – OETL-NF3150 da nica
ta l
UL & CSA
UL & CSA
Catalog number 3 pole OT200U03 OT400U03 OT600U03 OT800U03 OT1200U03 OETL-NF1600 OETL-NF2000 OETL-NF3150 5
Approvals1 2 pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC
4 pole UL98 & IEC UL98 & IEC UL98 & IEC IEC IEC IEC IEC IEC
General purpose amp rating -40° to 40°C
pf = 0.7 – 0.8 A 200 400 600 800 1200 1600 2000 3150
Max. operating voltage V 600 600 600 600 600 600 480 —
Max. horsepower rating/Max. motor FLA current,
pf = 0.4 – 0.5
Three phase
240V HP/A 75/192.0 125/312.0 200/480.0 200/602 — — — —
480V HP/A 150/180.0 250/302.0 450/515 500/590 — — — —
600V HP/A 200/192.0 350/336.0 500/472.0 500/472 — — — —

Single phase 120V HP/A — — — — — — — —
240V HP/A — — — — — — — —
Short circuit rating with fuse
Fuse type CC kA — — — — — — — —
Fuse type J kA 200 100 —/100 — — — — —
Fuse type T kA — — 100/— — — — — —
Fuse type RK1 kA — — — — — — — —
Fuse type RK5 kA — — 100 — — — — —
Fuse type L kA — — —/100 100 100 100 100 —
Fuse type H kA — — —/100 — — — — —
Maximum fuse size A 200 600 600/800 1200 1200 2000 2000 —
3 cycle short circuit current withstand rating 6 kA 14 30 50 50 50 65 65 —
Endurances
Mechanical endurance operations 20,000 20,000 10,000 6,000 6,000 6000 6000 6000
Weight, switches 3 pole lb 2.9 5.7 11.4 33.5 33.5 127.7 127.7 127.7
4 pole lb 3.5 6.8 14.3 42.9 42.9 149.7 149.7 149.7
Dimension, switches 3 pole H in 6.69 8.66 9.84 14.65 14.65 21.5 21.5 21.5
W in 6.67 8.70 10.48 13.78 13.78 18.11 18.11 18.11
D in 3.27 4.15 5.47 5.20 5.20 10.67 10.67 10.67
Shaft set screw tightening torque lb. in. 14 - 17.7 — — — — — — —
Shaft size — square in .24 x .24 .47 x .47 .47 x .47 .47 x .47 .47 x .47 .47 x .47 .47 x .47 .47 x .47
mm 6 x 6 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12
Switch operating torque for
lb. in. 62 142 184 575 575 438 438 438
rotary 3 pole switches
Terminal lug kits OZXA-200 OZXA-400 OZXA-800 OZXA-1200 OZXA-1200 OZXA-28 OZXA-28/2 OZXA-28/2
Wire range AWG #4-300kcmil3 #2-600kcmil3 (2)#2-600kcmil3 (4)#2-600kcmil3 (4)#2-600kcmil (4)#2-600kcmil (8)#2-600kcmil (8)#2-600kcmil
Torque:
Lug mounting lb. in. 72 240 240 450-670 450-670 230 230 230
Auxiliary contacts OA_G_ OA_G_ OA_G_ OA_G_ OA_G_ OZXK-_ _ OZXK-_ _ OZXK-_ _
NEMA ratings, AC A600 A600 A600 A600 A600 A600 A600 A600
AC rated voltage VAC 600 600 600 600 600 600 600 600
AC thermal rated current A 10 10 10 10 10 10 10 10
19
AC maximum volt-ampere making VA 7200 7200 7200 7200 7200 7200 7200 7200
AC maximum volt-ampere breaking VA 720 720 720 720 720 720 720 720
NEMA ratings, DC P600 P600 P600 P600 P600 P600 P600 P600
DC rated voltage VDC 600 600 600 600 600 600 600 600
DC thermal rated current A 5 5 5 5 5 5 5 5
DC maximum make-break VA 138 138 138 138 138 138 138 138
Torque: Wire tightening lb. in 7 7 7 7 7 7 7 7
Wire range AWG #22 – #14 #22 – #14 #22 – #14 #22 – #14 #22 – #14 #22 – #14 #22 – #14 #22 – #14
1 UL Listed switches are also CSA Approved.

2 UL98 overload test, 50 operations, pf 0.40 – 0.50 at 2x FLA.
3 Multi-tap lug available, please see page 19.34.
4 Fuse size 70A for RK5
5 IEC rated only.
6 When protected by any Listed fuse or Listed circuit breaker whose current rating does not exceed the maximum thermal current rating of the switch.

ct
ne s
n
o e
sc h l
Technical data
s ch
Te data IEC
IEC
Rated insulation and operation 40°C
voltage, AC20 and DC20 V 750 750 750 750 750 750 750 750
Rated impulse withstand voltage kV 8 8 8 8 8 8 8 8
AC 20/DC 20 open 1 A 25 32 40 63 80 40 63 115
40°C enclosed
A 25 32 40 63 80 40 63 115
60°C enclosed
A 25 32 40 63 80 40 63 115
Rated operational currents
AC 21A ≤500V A 16 25 40 63 80 30 60 100
≤690V A 16 25 40 63 80 40 63 100
≤1000V A — — — — — — — —
AC 22A ≤500V A 16 25 40 63 80 40 63 100
≤690V A 16 25 40 63 80 40 63 100
≤1000V A — — — — — — — —
AC 23A ≤415V A 16 20 23 45 75 40 63 80
≤500V A 16 20 23 45 58 40 60 60
≤690V A 10 11 12 20 20 40 40 40
≤1000V A — — — — — — — —
Rated operational currents/poles in series
DC21A 48V A 16/1 25/1 32/1 45/1 63/1 40/1 63/1 100/1
110V A 16/2 25/2 32/2 45/2 63/2 40/2 63/2 100/2
220V A 16/3 25/3 32/3 45/4 63/4 40/4 63/4 100/4
440V A 16/4 25/6 32/6 3 3 3 3 3
750V A 16/8 25/8 32/8 3 3 3 3 3
DC22A 48V A 16/1 25/1 32/1 45/1 63/1 40/1 63/1 100/1
110V A 16/2 25/2 32/2 45/2 63/2 40/2 63/2 100/2
220V A 16/3 25/3 32/4 45/4 63/4 40/4 63/4 63/4
440V A 16/6 25/8 3 3 3 3 3 3
750V A 16/8 25/8 3 3 3 3 3 3
DC23A 48V A 16/1 25/1 32/1 45/1 63/1 40/1 63/1 100/1
110V A 16/2 25/2 32/2 45/2 63/2 40/2 63/2 100/2
220V A 16/4 25/4 32/4 45/4 63/4 40/4 63/4 63/4
440V A 10/4 3 3 3 3 3 3 3
750V A 16/8 3 3 3 3 3 3 3
Rated operational power
AC23A 230V kW 3 4 5.5 11 22 7.5 11 22
400/415V kW 7.5 9 11 22 37 15 18.5 37
500V kW 7.5 9 11 22 37 15 18.5 37
690V kW 7.5 9 11 15 18.5 15 15 37
Short-circuit current kA 50 50 50 50 50 50 50 50
with back-up fuses of size A 25 32 40 63 80 100 100 100
19
Load Load Load
2 poles 3 poles 4 poles

in series in series in series
1 The ambient air temperature does not exceed +40°C and its average over a
period of 24 hours does not exceed +35°C according to IEC 947.
2 IEC 947-3, utilization category B, infrequent operation.
3 Not available at time of printing, please consult factory.

Di
s
sw con
ch es
ta l
IEC
IEC
Catalog number 3 pole OT200U03 OT400U03 OT600U03 OT800U03 OT1200U03 OETL-NF1600 OETL-NF2000 OETL-NF3150
Rated insulation and operational 40°C
voltage, AC20 and DC20 V 1000 1000 1000 1000 1000 1000 1000 1000
AC 20/DC 20 open1 A 250 400 800 1600 1600 2500 3150
40°C enclosed
A 250 400 800 1600 1600 2300 2300 2600
60°C enclosed
A — — — — — 1950 1950 2300
Rated operational currents
AC 21A ≤500V A 250 400 800 1600 1600 25002 25002 31502
≤690V A 250 400 800 1600 1600 25002 25002 31502
≤1000V A — — 800 1600 1600 — — —
AC 22A ≤500V A 250 400 800 1600 1600 16002 16002 16002
≤690V A 250 400 800 1600 1600 — — —
≤1000V A — — 800 — — — — —
AC 23A ≤415V A 250 400 800 1250 1250 8002 8002 8002
≤500V A 250 400 800 1250 1250 8002 8002 8002
≤690V A 250 400 800 1250 1250 — — —
≤1000V A — — 800 — — — — —
Rated operational currents/poles in series
DC21A 48V A 250/1 630/2 800/2 — — 2500/2 2500/2 3150/2
110V A 250/2 630/2 800/2 — — 2500/2 2500/2 3150/2
220V A 250/2 630/2 800/2 — — 2500/2 2500/2 3150/2
440V A 250/3 630/3 800/3 — — 2500/3 2500/3 3150/2
750V A
250/4 — — — — — — —
DC22A 48V A 250/1 630/2 800/2 — — 2500/2 2500/2 3150/2
110V A 250/2 630/2 800/2 — — 2500/2 2500/2 3150/2
220V A 250/2 630/2 800/2 — — 2500/2 2500/2 3150/2
440V A
250/3 630/3 800/3 — — — — —
750V A
250/4 — — — — — — —
DC23A 48V A
250/1 630/2 — — — — — —
110V A
250/2 630/2 — — — — — —
220V A
250/2 630/2 — — — — — —
440V A
250/3 — — — — — — —
750V A
250/4 — — — — — — —
Rated operational power
AC23A 230V
kW 75 110 — — — 250 250 250
400/415V kW
132/140 220/230 450 710 710 400 400 400
500V kW 170 280 560 900 900 450 450 450
690V kW 240 355 800 1200 1200 — — —
Short-circuit current kA 100 100 100 50/504 50/504 50/634 50/634 50/634
with back-up fuses of size A 400 800 800 — — — — —
19
Load Load Load

1 The ambient air temperature does not exceed +40°C and its average over a
period of 24 hours does not exceed +35°C according to IEC 947.
4 690V / 500V

ct
ne s
n
o e
sc h l
Technical data
s ch
Te data IEC
IEC
Rated short-circuit making capacity,
prospective peak value, Icm kA 0.7 0.7 0.7 1.4 1.4 3.6 3.6 3.6
Rated short time withstand current,
RMS lcw 0.2s kA — — — — — — — —
RMS lcw 1.0s kA 0.5 0.5 0.5 1 1 2.5 2.5 2.5
AC breaking capacity
pf = 0.35 ≤415V A 128 160 184 240 304 320 504 640
≤500V A 128 160 184 240 256 320 480 480
≤690V A 80 88 96 160 160 320 320 320
DC breaking capacity/poles in series
L/R = 15ms
≤48V A 64/1 100/1 128/1 180/1 252/1 160/1 252/1 400/1
≤110V A 64/2 100/2 128/2 180/2 252/2 160/2 252/2 400/2
≤220V A 64/3 100/4 128/4 180/4 180/4 160/4 252/4 252/4
≤440V A 1 1 1 1 1 1 1 1
≤750V A 1 1 1 1 1 1 1 1
Electrical endurance at rated operational
current, pf = 0.65 operation cycles 3000 3000 3000 3000 3000 3000 3000 3000
Mechanical endurance operations 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000
Weight 3 pole kg 0.11 0.11 0.11 0.27 0.27 0.36 0.36 0.36
4 pole kg 0.15 0.15 0.15 0.35 0.35 0.5 0.5 0.5
Dimension 3 pole H mm 68 68 68 91.5 91.5 100 100 100
W
mm 35 35 35 52.5 52.5 70 70 70
D
mm 56 56 56 72.5 72.5 75 75 75
Power loss per pole W 0.3 0.6 1 1.4 2.8 1 1.6 4
Shaft size — square mm 6 x 6 6 x 6 6 x 6 6 x 6 6 x 6 6 x 6 6 x 6 6x6
rotary 3 pole switches Nm 1 1 1 1.2 1.2 2 2 2
Suitable conductor cross section Cu mm2 0.75 – 10 0.75 – 10 0.75 – 10 1.5 – 25 1.5 – 25 1.5 – 25 1.5 – 25 10 – 70
Bolt size
— — — — — — — —
Auxiliary contacts OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _ OA1G_ _
Ratings according to IEC 947-5-1
Rated voltage, Ui VAC 690 690 690 690 690 690 690 690
Thermal current, Ith A 16 16 16 16 16 16 16 16
AC12/DC12 Ie, A Ue =120V A — — — — — — — —

125V A — — — — — — — —
240V A 62 62 62 62 62 6 2 62 62

250V A — — — — — — — —
400V A 42 42 42 42 42 4 2 42 42

415V A — — — — — — — —

440V A — — — — — — — —

480V A — — — — — — — —

500V A — — — — — — — —

600V A — — — — — — — —
690V A 22 22 22 22 22 22 22 22
19
Load Load Load


2 AC15, according to IEC947-5-1.

Di
s
sw con
ch es
ta l
IEC
IEC
Catalog number 3 pole OT200U03 OT400U03 OT600U03 OT800U03 OT1200U03 OETL-NF1600 OETL-NF2000
OETL-NF3150
Rated short-circuit making capacity,
prospective peak value, Icm500/690V kA 30 65 80 110 110 140/105 140/105 140/105
Rated short time withstand current,
RMS lcw 0.25s, 690V
kA 15 28 36 50 50 — — —
RMS lcw 1.0s, 690V kA 8 15 20 50 2 50 2 80 2 80 2 80 2
AC breaking capacity
pf = 0.35 ≤415V A 2000 3200 5760 10,000 10,000 6400 6400 6400
≤500V A 2000 3200 5600 10,000 10,000 6400 6400 6400
≤690V A 2000 3200 5600 10,000 3 10,000 3 4800 4 4800 4 4800 4
DC breaking capacity/poles in series
L/R = 15ms, 3 pole in series
48V A 1000/2 1 1 1 1 1 1 1
110V A 1000/2 1 1 1 1 1 1 1
220V A 1000/2 1600/2 2000/2 – – 2600/2 2600/2 2600/2
440V A 1000/3 1600 2000/3 1 1 1 1 1
750V A 1000/4 1 1 1 1 1 1 1
Electrical endurance at rated operational
current, pf = 0.65 operation cycles 1000 1000 1000 500 500 100 5 100 5 100 5
Mechanical endurance operations 20,000 16,000 10,000 6000 6000 6000 6000 6000
Weight 3 pole kg 1.2 2.2 5.2 15.2 15.2 37 37 37
4 pole kg 1.6 2.6 6.5 19.5 19.5 47 47 47
Dimension 3 pole H mm 162 216 250 372 372 372 546 546
W
mm 219 260 266 350 350 468 468 468
D
mm 92.5 130 139 132 132 271 271 271
Power loss per one pole W 6.5 10 40 29 48 90 90 140
Shaft size — square mm 6 x 6 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12 12 x 12
rotary 3 pole switches Nm 7 16 21 21 21 50 50 50
Suitable conductor cross section Cu mm2 — — — — — — — —
Bolt size 8 x 25 10 x 30 12 x 40 12 x 60 12 x 60 12 x 60 12 x 60 12 x 60
Auxiliary contacts OA_G_ OA_G_ OA_G_ OA_G_ OA_G_ OZXK-_ _ OZXK-_ _ OZXK-_ _
Rated voltage, Ui VAC 690 690 690 690 690 690 690 690
Thermal rated current, Ith A 16 16 10 10 10 10 10 10
AC12/DC12 Ie, A Ue =
120V A — — 8/— 8/— 8/— 8/— 8/— 8/—
125V A — — —/1.1 —/1.1 —/1.1 —/1.1 —/1.1 —/1.1
240V A 6/— 6/— 6/— 6/— 6/— 6/— 6/— 6/—
250V A — — —/0.55 —/0.55 —/0.55 —/0.55 —/0.55 —/0.55
400V A 4/— 4/— 4/— 4/— 4/— 4/— 4/— 4/—
415V A — — 4/— 4/— 4/— 4/— 4/— 4/—
440V A — — —/0.31 —/0.31 —/0.31 —/0.31 —/0.31 —/0.31
480V A — — 3/— 3/— 3/— 3/— 3/— 3/—
500V A — — 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27 3/0.27
600V A — — —/0.2 —/0.2 —/0.2 —/0.2 —/0. 2—/0.2
690V A 2/— 2/— 2/— 2/— 2/— 2/— 2/— 2/—
19
Load Load Load


2 Maximum distance between busbar support and switch terminal 70mm.
3 pf 0.95.
4 pf 0.65.

ct
ne s
n
o e
sc h l
Technical data
Di witc nica OTDC Disconnect switches
s ch
Te data 100A - 200A, 1000VDC
Technical data in accordance to UL98B for disconnect switches OTDC100 and OTDC200
Suitable for use in photovoltaic systems in accordance with Article 690 of NEC
Catalog number OTDC100 OTDC180 OTDC200

Approvals UL98B & IEC UL98B & IEC UL98B & IEC
General purpose amp rating (-20° – +50° C) A 100 180 200
Maximum operating voltage V 1000 1000 1000
Short circuit current rating at 1000 VDC kA 5 5 5
SCCR with: Circuit breaker Circuit breaker Circuit breaker
Endurances Oper 4000 4000 4000
Wiring range MCM #4-300 #4-300 #4-300
19

Di
s
sw con
ch es
OS30FA_12 – OS1200L03 da nica
ta l
UL & CSA
UL & CSA
Catalog number 3 pole OS30FA_12 OS60GJ12 OS100GJ03 OS200J03 OS400J03 OS600J03 OS800L03 0S1200U03
Approvals 1 2 pole N/A N/A IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC
Technical ratings -40° to 40°C
General purpose amp rating A 30 60 100 200 400 600 800 1200
pf = 0.7 – 0.8
Max horsepower rating/
Max motor FLA current
pf = 0.4 – 0.5
Three phase
240V Hp/A 7.5/22.0 15/42.0 30/80.0 60/145.0 125/312.0 200/480.0 250/602.0 —

480V Hp/A 15/21.0 30/40.0 60/77.0 125/156.0 250/302.0 400/477.0 500/590.0 —
600V Hp/A 20/22.0 50/52.0 75/77.0 150/144.0 350/336.0 500/472.0 500/472.0 —
Single phase
120V Hp/A 2/24.0 — — — — — — —
240V Hp/A 3/17.0 — — — — — — —
Short circuit rating with fuse kA 200 200 200 200 200 200 200 200
UL Fuse size A 30 60 100 200 400 600 800 1200
UL Fuse type J/CC J J/T J/T J J L L
Endurances
Mechanical endurance
operation 20,000 20,000 20,000 16,000 12,000 4,000 3000 2000
Weight 3 pole lb 1.54 2.86 3.30 5.9 12.56 28.66 28.66 63.93
4 pole lb 1.98 3.52 3.96 7.5 15.21 37.48 37.48 –
Dimension 3 pole H in 3.66 3.94 5.67 6.5 9.29 12.04 12.04 16.7
W in 4.15 5.63 7.07 7.1 10.04 13.50 13.50 16.42
D in 4.10 5.04 5.10 5.2 6.93 9.17 9.17 11.62
Shaft size square in .24 x .24 .24 x .24 .24 x .24 .24 x .24 .47 x .47 .47 x .47 .47 x .47 .47 x .47
mm 6 x 6 6 x 6 6 x 6 6 x 6 12 x 12 12 x 12 12 x 12 12 x 12
Switch operating torque lb. in. 26.6 35.5 70.9 195 195 336 336 575
for rotary 3 pole switches
Terminal lug kits
Integral Integral OZXA-24 OZXA-200 OZXA-400 OZXA-800 OZXA-800 OZXA-1200
Wire range AWG #18 – 8 #14 – 4 #14 – 2/0 #4 – 300kcmil #2 – 600kcmil (2) #2 – 600 kcmil (2) #2 – 600 kcmil (4)#2-600kcmil
Torque:
Lug mounting lb. in. N/A N/A 50 72 480 480 480 480
Auxiliary contacts
OA4G_ OA1/3G_ OA_G_ OA_G_ OA_G_ OA_G_ OA_G_ OA_G_ OA_G_
NEMA ratings, AC — A600 A600 A600 A600 A600 A600 A600 A600
AC rated voltage VAC 250 600 600 600 600 600 600 600 600
AC thermal rated current A 6 10 10 10 10 10 10 10 10
AC maximum volt ampere making VA — 7200 7200 7200 7200 7200 7200 7200 7200
AC maximum volt ampere breaking VA — 720 720 720 720 720 720 720 720
NEMA ratings, DC — P300 R300 R300 R300 P600 P600 P600 P600
DC rated voltage VDC — 300 300 300 300 600 600 600 600
DC thermal rated current A — 1 1 1 1 1 1 1 1
DC maximum make break current A — 28 28 28 28 28 28 28 28
Torque:

Wire range AWG #22 – 14/#18 – 14 #18 – 14 #18 – 14 #18 – 14 #18 – 14 #18 – 14 #20 – 12 #20 – 12
19
1 The following UL Listed switches are also CSA approved.

ct
ne s
n
o e
sc h l
Technical data
Di witc nica OS30FA_12 – OS1200L03
s ch
Te data IEC
IEC
Catalog number 3 pole OS30FA_12 OS60GJ12 OS100GJ03 OS200J03 OS400J03 OS600J03 OS800L03 OS1200L03
Technical ratings -40° to 40°C
Rated insulation voltage
Pollution degree 3 6 V 1000 1000 1000 1000 1000 1000 1000 1000
Dielectric strength 50Hz/60Hz, 1 min kV 10 10 10 10 10 10 10 10
Rated thermal current, Ith/
max. fuse power dissipation 1
AC 20/DC 20 open 2 A/W 32/3.5 63/7.5 160/12 200/17 400/45 630/60 800/65 1250/110
40°C enclosed A/W 32/3.5 63/7.5 160/12 200/15 400/30 570/50 720/55 1000/85
Enclosed with solid links A/W 32 – – – – – – –
with minimum cable cross section Cu mm2 6 16 70 95 240 2 x 185 2 x 240 1250/2 x 400
Rated operational voltage AC 20 and DC 20V 1000 1000 1000 1000 1000 1000 1000 1000
AC Rated operational currents
AC 21A ≤500V A 32 63 160 200 400 630 800 1250 Cat. B
≤690V A 32 63 160 200 400 630 800 1250 Cat. B
AC 22A ≤500V A 32 63 160 200 400 630 800 1250 Cat. B
≤690V A 32 63 160 200 400 630 800 1250 Cat. B
AC 23A ≤500V A 32 63 5 160 5 200 400 630 800 1000 Cat. B
≤690V A 32 63 5 160 5 200 400 630 800 1000 Cat. B
DC Rated operational currents/poles in series
DC21A 48V A 32/2 3 63/2 160/2 200/1 400/2 630/1 CAT. B 800/1 CAT. B –
110V A 32/2 63/2 125/2 200/1 400/2 630/1 CAT. B 800/1 CAT. B –
220V A 32/2 63/2 125/2 200/1 400/2 630/1 CAT. B 800/1 CAT. B –
440V A 32/4 50/4 125/4 200/2 400/3 CAT. B 630/2 CAT. B 800/2 CAT. B –
750V A — 4
4 180/4 400/4 CAT. B 630/4 CAT. B 720/4 CAT. B –
880V A — 4 4 180/4 – 630/4 CAT. B 720/4 CAT. B –
DC22A 48V A 32/2 3 63/2 160/2 200/1 400/2 — 800/1 CAT. B –
110V A 32/2 63/2 125/2 200/1 400/2 — 800/1 CAT. B –
220V A 32/2 63/2 125/2 200/1 400/2 — 800/1 CAT. B –
440V A 32/4 – – 200/2 400/3 CAT. B — 800/2 CAT. B –
750V A — 4
4 180/4 400/4 CAT. B — 800/4 CAT. B –
880V A — 4 4 180/4 – — 800/4 CAT. B –
DC23A 48V A 32/2 3 63/2 160/2 200/1 400/2 — 800/1 CAT. B –
110V A 32/2 63/2 125/2 200/1 400/2 — 800/1 CAT. B –
220V A 32/2 63/2 125/2 200/1 400/2 — 800/1 CAT. B –
440V A 32/4 – – 200/2 400/3 CAT B — 800/2 CAT. B –
750V A — – – 180/4 400/4 CAT. B — 720/4 CAT. B –
880V A — – – 180/4 — — 720/4 CAT. B –
Rated operational power AC23A
230V kW 7.5 18.5 45 60 132 200 250 315
400V kW 15 30 75 110 220 355 450 560
415V kW 15 30 75 110 230 355 450 560
500V kW 18.5 37 90 132 280 450 560 710
690V kW 22 55 132 200 400 630 710 1000
Load Load Load Load

19 in series in series in series
2 + 2 parallel contacts in series
1 Ambient temperature 60°C: derating 20 percent. Mounting on ceiling: derating 10 percent. Mounting on wall, horizontal fuses: derating 8 percent.
2 The ambient air temperature does not exceed +40°C and its average over a period of 24h does not exceed +35°C according to IEC 947.
3 For 30A switches, use 2 + 2 parallel contacts in series.
4 Available on request.
6 Pollution degree 3: Conductive pollution occurs, or dry, non-conductive pollution occurs, which becomes conductive due to condensation.

Di
s
sw con
ch es
OS30FA_12 – OS1200L03 da nica
ta l
IEC
IEC
Catalog number 3 pole OS30FA_12 OS60GJ12 OS100GJ03 OS200J03 OS400J03 OS600J03 OS800L03 OS1200L03
Rated breaking capacity

in category AC-23A
500V A 256 504 1280 1600 3200 5760 5760 8000
690V A 256 504 1280 1600 3200 5760 5760 8000
Rated breaking capacity/poles in series
in category DC-23 <220V A 128/2 252/2 640/2 — — – – –
440V A 128/4 — — — — – – –
500 – 750V A — — — — — – – –
1000V A — — — — — – – –
Rated conditional short-circuit current r.m.s. 3
80 kA, 415V kA 9 13.5 22 35 40 75 75 89
100 kA, 500 V kA 8 12.5 22 37.5 40 75 75 105
50 kA, 690 V kA 7 9.5 15 – – – – –
Rated short time withstand current, 1s. kA 1 2.5 5 8 14 18 18 40
Rated capacitor power
The capacitor rating of the fusible
disconnect switch is limited by the fuse link
400 V kVar 15 30 60 90 180 250 310 440
415V kVar 15 32 65 100 200 270 340 460
690V kVar 25 50 100 160 325 450 550 750
Power loss/pole
with rated current, without fuse W 2 4 9 8 30 46 75 75
Mechanical endurance operations 20,000 20,000 20,000 20,000 16,000 10,000 10,000 6000

Weight 3 pole kg 0.7 1.1 1.5 2.6 5.7 11.5 11.5 29.00
4 pole kg 0.9 1.3 1.8 – – – – –
Dimension 3 pole H mm 93 100 144 198.5 236 306 282 424.18
W mm 106 143 179 181.5 255 343 376 417.07
D mm 104 120 129 132 176 233 233 295.14
Shaft size square mm 6 x 6 6 x 6 6 x 6 6 x 6 12 x 12 12 x 12 12 x 12 12 x 12
Terminals
2
Built-in terminal size mm 0.5 – 10 2.5 – 25 — — — — — —
Terminal bolt size, metric thread
diameter x length mm — — — M8 x 25 M8 x 25 M10 x 30 M12 x 40 M12 x 40 M12 x 40
Terminal bolt tightening torque Nm 2 3.5 15-22 15 – 22 30 – 44 50 – 75 50 – 75 50 – 75
Fuse-links bolts tightening torque Nm 2 3.5 M5:3.5 M8:5 4 20 M10:30 M12:40 M10:30 M12:40 M12:40
Operating torque Nm 3 5 7 7 19 38 38 65
Auxiliary contacts
OA4G_
OA1/3G OA_G_ OA_G_ OA_G_ OA_G_ OA_G_ OA_G_ OA_G

1 2 2 2 2
Rated voltage, Ui
VAC 690 690 690 690 690 690 690 690 690
Thermal current, Ith A 10 16 16 16 16 16 16 16 16
AC12 / DC12, Ie Ue=24V A — / 6 — — — — — — — —
120V A — / 6 — — — — — — — —
125V A — — — — — — — — —
230V A — 6 / — 6 / — 6 / — 6 / — — — 6 / — 6/—
250V A 3 / 0.1 — — — — — — — —
400V A — 4 / — 4 / — 4 / — 4 / — — — 4 / — 4/—
415V A — — — — — — — — —
440V A 2 / — — — — — — — — —
480V A — — — — — — — — —
500V A — — — — — — — — —
600V A — — — — — — — — —
690V A — 2/— 2/— 2/— 2/— 2/— 2 / — 2 / — 2/—
19
1 AC15 / DC12, according to IEC 947-5-1

2 AC15, according to IEC 947-5-1
3 Values shown are corresponding max. allowed cut-off current, peak-values per single phase fuse tests.

ct
ne s
n
o e
sc h l
Auxiliary contact timing diagrams
Di witc nica OT16 – OT100
s ch
Te data
Legend
0° 30° 60° 90°
ON
Main contacts I ON
N.O. auxiliary contact
O OFF
OFF
N.C. auxiliary contact
OFF ON
0 I
= Contacts in closed position
Contacts closing Contacts opening

1 Main contacts close 4 Main contacts open
2 N.O. auxiliary contacts close 5 N.O. auxiliary contacts open
3 N.C. auxiliary contacts open 6 N.C. auxiliary contacts close
0° 30° 60° 90°
OT16, OT25, OT40 Main contacts
Catalog number Auxiliary contact Contact configuration OA1G10 N.O. auxiliary contact
OA1G10 1 N.O. OA1G01 N.C. auxiliary contact

OT16, OT25, OT40 OA1G01 1 N.C.
OA2G11 1 N.O. & 1 N.C. OA2G11
OFF ON
0 I
0° 30° 60° 90°
Main contacts
OT63, OT80 OA1G10 N.O. auxiliary contact
Catalog number Auxiliary contact Contact configuration OA1G01 N.C. auxiliary contact
OA1G10 1 N.O. N.O. auxiliary contact

OT63, OT80 OA1G01 1 N.C. OA2G11
OA2G11 1 N.O. & 1 N.C.
OFF ON
0 I
19
0° 30° 60° 90°
Main contacts
OT30, OT60, OT100 OA1G10 N.O. auxiliary contact
Catalog number Auxiliary contact Contact configuration
OA1G01 N.C. auxiliary contact
OA1G10 1 N.O.
OT30, OT60, OT100 OA1G01 1 N.C. N.O. auxiliary contact
OA2G11 1 N.O. & 1 N.C. OA2G11
OFF ON
0 I

Di
s
sw con
Auxiliary contact timing diagrams Te itch nect
ch es
OT200U – OETL-NF3150 da nica
ta l
OT200U03 – OT1200U03

OT200U03 – OA1G10 1 N.O.

OT1200U03 OA3G01 1 N.C.
1) OT800 - 1200 only
0° 30° 60° 90°

OETL-NF1600 – OETL-NF3150
Main contacts
OZXK-1 1 N.O. & 1 N.C.
OETL-NF1600A – N.O. auxiliary contact
OZXK-2 2 N.O. & 2 N.C.
OETL-NF3150
OZXK-3 4 N.O. & 4 N.C.
OFF ON
0 I
OZXK-1
OZXK-2
OZXK-3 19

ct
ne s
n
o e
sc h l
Auxiliary contact timing diagrams
Di witc nica OS30_
s ch
Te data
Legend
0° 30° 60° 90° a ON
I ON
1
Main contacts 0‡ I
O OFF
0 ‡I 4 2
OFF
3
5
6
OFF ON
0 I
Contacts closing Contacts opening

1 Main contacts close 4 Main contacts open
2 N.O. auxiliary contacts close 5 N.O. auxiliary contacts open
3 N.C. auxiliary contacts open 6 N.C. auxiliary contacts close
OS30_ -45° 0° 30° 60° 90° a

Main contacts
OA4B1C 1 N.O. & 1 N.C.
OA4B1C N.O. auxiliary contact
OS30_ OA1G10 1 N.O.
OA3G01 1 N.C. OA4B1C N.C. auxiliary contact
OA1G10 N.O. auxiliary contact

OA3G01 N.C. auxiliary contact
Test
19

Di
s
sw con
Auxiliary contact timing diagrams Te itch nect
ch es
OS60 - OS1200 da nica
ta l
OS60-OS1200
1) OS1200 only
19

ct
ne s
n
o e
sc h l
NEMA Environmental ratings
Di witc nica
s ch
Te data
Introduction
An enclosure is a surrounding case constructed to provide a follows. Refer to NEMA Standards Publication for more
degree of protection to personnel against accidental contact with information regarding applications, features and design tests.
the enclosed equipment and to provide a degree of protection Individual NEMA product Standards Publications or third party
to the enclosed equipment against specified environmental certification standards may contain additional requirements for
conditions. product testing and performance.
A brief description of the more common types of enclosures used
by the electrical industry relating to their environmental capabilities
Definitions pertaining to nonhazardous locations Definitions pertaining to hazardous locations
Type 1 Type 4X Type 7
Enclosures are intended for indoor use Enclosures are intended for indoor or outdoor Enclosures are intended for indoor use in
primarily to provide a degree of protection use primarily to provide a degree of protection locations classified as Class I, Groups, A, B, C,
against limited amounts of falling dirt. against corrosion, windblown dust and or D, as defined in the National Electrical Code.
(NEMA Standard 7-15-1991.) rain, splashing water, hose-directed water (NEMA Standard 7-15-1991.)
and damage from external ice formation.
(NEMA Standard 1-10-1979)
Type 3R Type 12 Type 9
Enclosures are intended for outdoor use Enclosures are intended for indoor Enclosures are intended for indoor use in
primarily to provide a degree of protection use primarily to provide a degree of locations classified as Class II, Groups E, F, or
against rain, sleet and damage from external ice protection against circulating dust, falling G, as defined in the National Electrical Code.
formation. (NEMA Standard 7-15-1991.) dirt, and dripping noncorrosive liquids. (NEMA Standard 7-15-1991.)
(NEMA Standard 7-15-1991.)
Legend
– Indoors
Type 4 Type 13
– Outdoors
Enclosures are intended for indoor or Enclosures are intended for indoor use primarily
19 outdoor use primarily to provide a degree to provide a degree of protection against dust, – Water
of protection against windblown dust and spraying of water, oil and noncorrosive coolant.
rain, splashing water, hose-directed water (NEMA Standard 1-10-1979.) – Dirt/dust
and damage from external ice formation.
X
(NEMA Standard 1-10-1979.)
– Corrosion

Di
s
sw con
IEC Environmental ratings Te itch nect
ch es
da nica
ta l
IP ratings indicate the degree of protection against dust, liquids and impacts. The IP degrees of protection are defined by the
French standard NFC 20-010. To rate a device's degrees of protection, the letters IP are followed by up to three
numbers. These numbers are defined as follows:
first number second number third number

protection against solid objects
protection against liquids
protection
against mechanical impacts
no protection no protection no protection

IP IP IP
0 0 0
protected against solid protected against vertically impact 0,225 joule

1 objects over 50mm (e.g. 1 falling rain or condensation 1 150g falling from 15 cm
accidental touch by hands.)
protected against solid protected against direct impact 0,375 joule

2 objects over 12 mm 2 sprays of water up to 15° 2 250g falling from15 cm
(e.g. fingers) from vertical
protected against solid protected against sprays to impact 0,50 joule

3 objects over 2.5 mm (tools & 3 60° from vertical 3 250g falling from 20cm
wires)
protected against water

protected against solid impact 2,00 joule
4 objects over 1mm (small 4 sprayed from all directions 5 500g falling from 40 cm
tools & small wires)
protected against dust (no protected against low impact 6,00 joule
5 harmful deposit) 5 pressure jets of water from 7 1.5kg falling from 40 cm
all directions
totally protected against dust protected from strong jets of impact 20,00 joule
6 6 water (e.g. for use on ship 9 5 kg falling from 40 cm
decks)
19
protected against the effects

7 of immersion between 15cm
and 1m

ct
ne s
n
o e
sc h l
Definitions
Di witc nica
s ch
Te data
AC – Alternating current — Current that reverses its direction of manufacturer and taking into account the rated operating voltage
flow twice per cycle. Ue, the rated frequency, the rated duty, the utilization category, the
electrical contact life and the type of protective enclosure.
Ambient temperature — Temperature of the air surrounding the
unit. Rated operating voltage Ue — Voltage value to which utilization
characteristics of the disconnect switch are referred, i.e. phase-to-
Amp rating — The basic unit of measurement for electric current phase voltage in 3 phase circuits.
(columbs / seconds).
Rated short circuit making capacity Icm— The rated short-
Conventional thermal current Ith — Value of the current the circuit making capacity of a disconnect switch, a disconnector or
disconnect switch can withstand with poles in closed position, in a switch-disconnector is the value assigned to equipment at the
free air for an eight hour duty, without the temperature rise of its rated operational voltage, frequency (if any) and specified power-
various parts exceeding the limits specified by the standards. factor for AC or time constant for DC. It is expressed as the
maximum prospective peak current under prescribed conditions.
Cycle duration — Total time of the on-load + off-load period.
Rated short time withstand current Icw — The rated short-
DC – Direct current — Current that flows in only one direction. time withstand current of a disconnect switch, a disconnector or
a switch-disconnector is the value that the equipment can carry
Electrical endurance — Number of on-load operating cycles. without damage, under the test conditions specified in the relevant
IEC environmental protection type — see page 19.48. product standard. The value of the rated short-time withstand
current shall be not less than twelve times the maximum rated
Full load amp current FLA — The current required by a motor to operational current unless otherwise stated by manufacturer and
produce full-load torque at the motor's rated speed. the duration of the current shall be 1 s.
Inductive load — An electrical load characterized by having Resistive load — An electrical load characterized by not having
significant inrush (5 to 6 times FLA for typical design-B AC any significant inrush current.
induction motors).
Short circuit protection coordination — Co-ordination types "1"
kW — Kilowatts (1000 watts) and "2" are defined in IEC 947-4-1.
Type 1 coordination — There has to be no discharge of parts
Lockout/Tagout — Means of removing power from electrical beyond the enclosure. Damage to the contactor and the overload
equipment during inspection, service or repair. is acceptable.
Type 2 coordination — No damage to the overload relay or other
Make / Break — ON / OFF parts has occurred, except that welding of contactor or starter
contacts is permitted, if they are easily separated.
Mechanical endurance — Number of off-load operating cycles.
Time constant — Ratio of inductance to the resistance:
Poles in series — Means of connection poles using wires or bus L/R = mH/Ohm = ms.
bars to increase breaking capacity of load.
Torque — The force that produces rotation. It is commonly
Power factor — The relationship between working power and measured in pound-feet (lb-ft). Torque applies to such things as
total power consumed. Power factor measures how effectively motor operations, handle rotations, wire tightening.
electrical power is being used.
NEMA environmental protection type — see page 19.47.
Rated insulation Ui — Voltage value which designates the unit
and to which dielectric tests, clearance and creepage distances Volt — The unit of electrical potential difference and electromotive
are referred. force.
Rated operating current Ie —Current value stated by the
19

Di
s
sw con
Approximate dimensions Di itc ne
me h ct
OT16F3 – OT100F3 ns es
ion
00.00
00.00
Inches Base & DIN rail mounted switches s
[Millimeters]
OT16F3, OT25F3, OT40F3 — base & DIN rail mounted switch

0.43 0.43 0.24
0.18 DIA. 11 11 0.20
4.5 56
0.47
12
2.13 2.36 1.38

35
54 60
2.68
68
0.87
22 1.77
45
0.43 1.38 0.51
11 35 13 2.20
56
OT63F3, OT80F3 — base & DIN rail mounted switch

0.69 0.69
OT16,25,32
17.5 17.5 0.24
0.18 DIA. 0.20
56
4.5
0.59
15
2.85 3.25 3.60 1.38

72.5 82.5 91.5 35
1.71 2.47
43.5 63
0.43 2.07 2.89

11 52.5 73.5
0.69
17.5
OT30F3, OT60F3, OT100F3 — base & DIN rail mounted switch

0.18 DIA. 0.88 0.88
OT45,63
4.5 22.5 22.5
0.59
15 0.24
0.20
56
19
3.94 3.54 3.94 1.38

100 90 100 35
2.20 2.48
56 63
0.43 2.76 1.04 2.93

11 70 26.5 74.5

OT100E3
ct
n ne s Approximate dimensions
o he s
sc
Di witc sion OT16FT3 – OT100FT3
s en
m Door mounted switches
Di 00.00 Inches
00.00 [Millimeters]
OT16FT3, OT25FT3, OT40FT3 — door mounted switch
2.64
67
0.43 0.43 0.51
11 11 13
2.05
52
0.06
0.08 1.5
2
2.13
54
0.88
22
0.43 1.38 0.51

11 35 13
MOUNTING HOLE
DETAIL 1.69
43
OT 16 & 32ET
OT63FT3, OT80FT3 — door mounted switch

1.89
48 0.69 0.69 0.69
2.72 17.5 17.5 17.5
69
1.42
36
0.71 0.71
18 18
0.16 D 0.71
4 18
1.42 1.89 2.85
36 48 72.5
0.71
0.88 D 18
22
MOUNTING HOLE
DETAIL
2.56
65
0.43 2.07
11 52.5
0.69
17.5
OT30FT3, OT60FT3, OT100FT3 — door mounted switch
OT63ET3
0.88 0.88 0.88
66.5 0.55 22.5 22.5
14
2.20
56
1.89
48
0.94 0.94 0.16 D
24 24 4
19
0.94
24
1.89 2.20 3.94
48 56 100
0.94
24
0.88 D
22
MOUNTING HOLE
DETAIL
0.43 2.76 1.04
11 70 26.5
OT100ET3
Di
s
sw con
me h ct
OT16F6 – OT100F6 ns es
ion
s
00.00
00.00
Inches
[Millimeters]
6-pole switches
OT16, 25, 40F6 — 6 Pole switches
0.43 0.51 0.43 0.43 0.51

1.38 11 13 11 11 13
35
1.12 1.85
0.18 DIA. 28.5 0.24 47
4.5 6 shaft depth
2.68
68
2.13 2.36 35mm

DIN rail
54 60
1.12 1.38 2.22

28.5 35 56.5
0.43 2.76 0.43 2.68
11 0.51 70 0.51 11 68
13 13
OT63, OT80F6 — 6 Pole switches
0.69 0.69 0.69 0.69 0.69

17.5 17.5 17.5 17.5 17.5
0.18 DIA. 2.40

4.5 2.07 1.89 61
52.5 48 shaft depth
0.24
6
3.60
3.25 91.5
82.5
2.85 35mm
DIN rail
72.5
2.95
1.89 2.07 75
0.69 48 52.5 0.69
17.5 17.5 3.31
0.43 4.13 0.43
84
11 105 11
OT30, OT60, OT100F6 — 6 Pole switches
0.18 DIA. 0.88 0.88 0.98 0.88 0.88

4.5 22.5 22.5 25.0 22.5 22.5
2.50
2.76 2.48 63.5
70 63 shaft depth
0.24
6 19
3.94
100
3.94 3.54 35mm

100 90 DIN rail
0.43 2.48 2.76 2.99

11 63 70 76
1.04 5.51 1.04 3.43
26.5 140 26.5 87

ct
ne s
n
o he s Approximate dimensions
sc
Di witc sion OT16 – OT100F3C
s en
m Double throw switches
Di 00.00 Inches
00.00 [Millimeters]
OT16, OT25, OT40F3C – Double throw switches
0.43 0.51 0.43 0.43 0.51

1.38 11 13 11 11 13
35
1.12 1.85
0.18 DIA. 28.5 0.24 47
4.5 6 shaft depth
2.68
68
2.13 2.36 35mm

DIN rail
54 60
1.12 1.38 2.22

28.5 35 56.5
0.43 2.76 0.43 2.68
11 0.51 70 0.51 11 68
13 13
0.69 0.69 0.69 0.69 0.69

17.5 17.5 17.5 17.5 17.5
0.18 DIA. 2.40

4.5 2.07 1.89 61
52.5 48 shaft depth
0.24
6
3.60
3.25 91.5
82.5
2.85 35mm
DIN rail
72.5
2.95
1.89 2.07 75
0.69 48 52.5 0.69
17.5 17.5 3.31
0.43 4.13 0.43
84
11 105 11
0.18 DIA. 0.88 0.88 0.98 0.88 0.88

4.5 22.5 22.5 25.0 22.5 22.5
2.50
2.76 2.48 63.5
70 63 shaft depth
0.24
19 6
3.94
100
3.94 3.54 35mm

100 90 DIN rail
0.43 2.48 2.76 2.99

11 63 70 76
1.04 5.51 1.04 3.43
26.5 140 26.5 87

Di
s
sw con
me h ct
OT200_ — OT400_ ns es
ion
00.00 Inches
s
00.00 [Millimeters]
OT200U03
OT400U03
19

ct
n ne s
sc
Di witc sion OT600U03 – OT800U03
s en
m
Di 00.00 Inches
00.00 [Millimeters]
OT600U03
OT800U03 13.78
[350]
6.01 12.76
[153] [324]
11.57
[294]
3.15
[80]
1.06
[27]
0.35
[9]
18.99
[482
14.65
[372]
9.13
[232]
6.93
[176]
19
0.77
[20]
0.80
[20]
0.59
[15] 0.54
0.40 [14]
3.05 [10]
[78]
5.20 1.97
[132] [50]
5.74
[146]

Di
s
sw con
me h ct
OT1200U03 – OETL-NF1600 ns es
ion
00.00 Inches
s
00.00 [Millimeters]
OT1200U03 17.40
[442.00]
16.54
[420.00]
15.20
11.62 [386.00]
[295.23] 4.33
5.20 [110.00]
[132.18]
0.54
[13.63]
0.40
[10.13]
21.75
[552.38]
8.27
[210.00]
10.47
[266.00]
11.30
[287.00]
16.77
[426.0
0.47
[12.00] 1.53
2.24 1.97
[57.00] [38.88]
[50.00]
2.47 1.86
[62.71] [47.29]
OETL-NF1600
0.55 DIA.
14
OS1200
3.94
0.47 DIA. 100
12
1.58 1.28 0.79
40 32.5 20
1.38 1.58
35 40
0.35 DIA.
9
0.47
12
25.28 21.50
642 546
7.48 8.35
190 212
3.74
95
19
5.47
139 4.41 0.59
112 15
10.12 15.59 21.06
0.94 257 396 535
24 2-pole 3-pole 4-pole
10.67
271
12.63 18.11 23.58
321 460 599
2-pole 3-pole 4-pole

OETL-NF1600
ct
o he s
sc
Di witc sion OETL-NF2000 – OETL-NF3150
s en
m
Di 00.00 Inches
00.00 [Millimeters]
OETL-NF2000 – OETL-NF3150
0.55 DIA.
14
3.94
0.47 DIA. 100
12
1.58 1.28 0.79
40 32.5 20
1.38 1.58
35 40
0.35 DIA.
9
0.47
12
25.28 21.50
642 546
7.48 8.35
190 212
3.74
95
5.47
139 4.41 0.59
112 15
10.12 15.59 21.06
0.94 257 396 535
24 2-pole 3-pole 4-pole 10.67
271
12.63 18.11 23.58
321 460 599
2-pole 3-pole 4-pole
OETL-NF2000,3150
19

Di
s
sw con
me h ct
OS30FA_12 — OS60GJ12 ns es
ion
00.00 Inches
s
00.00 [Millimeters]
OS30FA_12
OS60GJ12
5.77
4.65
[146.50]
[118.00]
5.63
2.15
[143.01]
[54.66] 4.59
[116.50]
OS60GJ12
3.31 4.49
[84.00] [114.00
3.94
[100.00]
0.68
[17.30]
2.81
[71.50]
1.38
[35.00]
19
OS60GJ12

ct
o he s
sc
Di witc sion OS100GJ03 — OS200J03
s en
m
Di 00.00 Inches
00.00 [Millimeters]
OS100GJ03
6.10
4.11 [155.00]
[104.46] 4.92
0.10 [125.00]
[2.50]
0.79
1.50 [20.00]
[38.00]
OS100GJ30 7.91
8.66 [201.01
[220.00] 4.49
[114.01]
6.77 3.94
[172.00] 3.31
[100.00]
[84.00]
1.38 1.38
[35.00] [35.00]
OS100GJ30
OS200J03
19

Di
s
sw con
me h ct
OS400J03 — OS600J03 ns es
ion
00.00 Inches
s
00.00 [Millimeters]
OS400J03
OS600J03
19

ct
o he s
sc
Di witc sion OS800L03 — OS1200L03
s en
m
Di 00.00 Inches
00.00 [Millimeters]
OS800L03
13.86
9.18 [352]
[233] 11.65
4.97 [296]
3.46
[126]
[88]
0.69
[17]
0.35
[9]
14.26
[362]
12.03
[306]
9.13
[232]
6.93
[176]
0.24
0.77
2.14 [6] 1.54
[19] 1.49
[54] [39]
[38]
0.52
[13]
OS1200L03 OS800 16.54

[420.00]
17.40
[442.00]
15.20
11.62 [386.00]
[295.23] 4.33
5.20 [110.00]
[132.18]
0.54
[13.63]
0.40
[10.13]
21.75
[552.38]
8.27
[210.00]
10.47
[266.00]
19 11.30
[287.00]
16.77
[426.0
0.47
[12.00] 1.53
2.24 1.97
[57.00] [38.88]
[50.00]
2.47 1.86
[62.71] [47.29]
OS1200
Di
s
sw con
me h ct
for Terminal lugs ns es
ion
00.00 Inches
s
00.00 [Millimeters]
OZXA-24 OZXA-30
1.57 3.00
40 76
0.79
20
0.63
16
0.41
10.5
1.46
37
0.26 0.45
6.5 11.5 0.10 4.92
C.L. 2.5 125
0.18
4.5
OZXA-24
1.38
35
C.L. 0.37 0.75

0.41 9.5 19
10.3
OZXA-30
OZXA-28 & OZXA-28/2 OZXA-400
2.47 3.00
63 76
4.92
125
1.38
35 C.L.
C.L. 0.37 0.75

0.41 9.5 19
10.3
OZXA-28
OZXA-200
19

ct
ne s
n
sc
Di witc sion for Terminal lugs
s en
m
Di 00.00 Inches
00.00 [Millimeters]
OZXA-800 OZXA-406
C.L.
OZXA-32 OZXA-1200
2.47 3.00 2.96
63 76 [75.18]
1.35
[34.29]
1.00
1.38 [25.40]
[35.05]
1.19
4.92 [30.23]
125 4.91
[124.71]
1.09
1.38 [27.69]
35 1.38
[35.05] 1.25
[31.75]
C.L. 0.37 0.75 0.62

0.41 9.5 19 0.37 2.47 Ø0.41
10.3 [15.75]
[9.40] [62.74] [Ø10.41]
OZXA-32
OZXA-1200
19

Di
s
sw con
me h ct
for 16A – 100A conversion mechanisms ns es
ion
00.00 Inches
s
00.00 [Millimeters]
6 or 8 pole — OTZW8 For installation of 6 or 8 pole, transfer and bypass mechanisms, the following
minimum and maximum mounting dimensions are given below.
OTZW8 Minimum Maximum

0.24 0.24 in combination with: inches/mm inches/mm
6 6
OT16F3, OT25F3, OT40F3 3.07/78 N/A

OT63F3, OT80F3 3.74/95 N/A
OT30F3, OT60F3, OT100F3 3.82/97 N/A
1.18 + (0...13) 0.59 STEPS 0.59

30 15 15
Double throw switch — OTZW6, OTZW6X

2.83 OTZW81.18 2.17 OESA-ZW1, OESA-ZW1X Minimum Maximum1
72 30 55 in combination with: inches/mm inches/mm
1.54
39 0.24
6 OT16F3, OT25F3, OT40F3 4.61/117 6.57/167
OT63F3, OT80F3 5.31/135 7.28/185
1.54
39 0.24 OT30F3, OT60F3, OT100F3 4.84/123 6.81/173
6
10.71 3.54...9.45
272 90...240
15mm STEPS
0.59
15
0.24
6
Bypass switch — OTZW17, OTZW17X

OTZW6 OTZW17, OTZW17X Minimum Maximum1
2.83 1.18 2.17 in combination with: inches/mm inches/mm
72 30 55
1.54 OT16F3, OT25F3, OT40F3 4.61/117 6.57/167
39 0.24
6 OT63F3, OT80F3 5.31/135 7.28/185
OT30F3, OT60F3, OT100F3 4.84/123 6.81/173
1.54
39 0.24
6
3.54...8.27
90...210
15mm STEPS
10.71 0.24
272 6
0.59
15
4.72...9.45
120...240
15mm STEPS
0.24
6
19
Mechanical interlock — OETL-ZW24 OETL-ZW24 Minimum Maximum1
in combination with: inches/mm inches/mm
OTZW17 OT16F3, OT25F3, OT40F3 3.39 / 86 —
OT63F3, OT80F3 4.09 / 104 —
OT30F3, OT60F3, OT100F3 4.13 / 105 —
0.24
6
3.94
100
1 Deeper enclosures will require a longer shaft. Please select a 6mm shaft from page 19.5.

ct
o he s
sc
Di witc sion for 125 – 200A conversion mechanisms
s en
m
Di 00.00 Inches
00.00 [Millimeters]
6 or 8 pole — OESA-ZW2
0.47 1.57
12 40
7.72
196
0.24 0.24
6 6 4.72
120 For installation of 6 or 8 pole, transfer and bypass mechanisms, the following
OESA-ZW2 Minimum Maximum

OT160 - OT200 5.35/136 9.49/241
NOTE: Deeper enclosures will require a longer shaft. Please select a 12mm shaft from page
19.7 and an OETL-ZX95 shaft extension coupler from page 19.10.
1.77...9.49 0.59
45...240 15
(15mm Steps)
OESA-ZW2
Double throw switch — OESA-ZW1, OESA-ZW1X
2.83 4.57 2.17

72 116 55
1.54
39 0.24
6
1.54
39 0.24
6
10.71
272 3.54...9.45
90...240
15mm STEPS OESA-ZW1, OESA-ZW1X Minimum Maximum
0.59 OT160 - OT200 4.61/117 6.57/167
15
NOTE: Deeper enclosures will require a longer shaft. Please select a 6mm shaft from page 19.7
0.24
6
19
Mechanical interlock — OESA-ZW1
OTZW10
OTZW10 Minimum Maximum

0.24
5 OT160 - OT200 4.13 / 105 —
NOTE: Deeper enclosures will require a longer shaft. Please select a 6mm shaft from page 19.7
7.48
190

Di
s
sw con
me h ct
for 400A – 1200A conversion mechanisms ns es
ion
00.00 Inches
s
00.00 [Millimeters]
6 or 8 pole — OETL-ZW9
For installation of 6 or 8 pole, transfer and bypass mechanisms, the following
OETL-ZW9 Minimum Maximum

1.46 in combination with: inches/mm inches/mm
37
OT400 7.52/191 N/A
OT600 7.52/191 N/A
OETL-NF800A 7.52/191 N/A
OETL-NF1200 7.52/191 N/A
NOTE: Handle not included
0.47 2.36...17.32 0.79

12 60...240
20
20mm Steps
OETL-ZW9
Double throw — OETL-ZW12

OETL-ZW12 Minimum Maximum1
1.89 1.57
48 40
OT400 8.19/208 11.73/298
4.53
3.54 115 OT600 8.19/208 11.73/298
90
OETL-NF800A 8.19/208 11.73/298
OETL-NF1200 8.19/208 11.73/298
NOTE: Includes YASDA-21 handle
3.31
84 0.47
12
0.47
12
26.06 8.27...24.02
662 210...610
20mm steps
0.79
20
19
0.47
12
OETL-ZW12
1 Deeper enclosures will require a longer shaft. Please select a 12mm shaft from page 19.7 and an OETL-ZX95 shaft extension coupler from pg. 18.10.

ct
o he s
sc
Di witc sion for 400A – 3150A conversion mechanisms
s en
m
Di 00.00 Inches
00.00 [Millimeters]
Bypass switch — OETL-ZW13

2.07
52.5 For installation of 6 or 8 pole, transfer and bypass mechanisms, the following
3.54 4.53 1.32
90 115 33.5 minimum and maximum mounting dimensions are given below.
OETL-ZW12 Minimum Maximum1

OT400 8.19/208 11.73/298
3.31
84 0.47 OT600 8.19/208 11.73/298
12
OETL-NF800A 8.19/208 11.73/298
OETL-NF1200 8.19/208 11.73/298
NOTE: Includes YASDA-21 handle
0.47
12
8.27...22.44
210...570
26.06
662
9.84...24.02
250...610
0.47
12
0.79
20
0.47
12
Mechanical interlock — OETL-ZW3, OETL-ZW14, OETL-ZW15

OETL-ZW13 OETL-ZW3, 14 & 15 Minimum Maximum1
OT400 & OT600 6.50/165 —
OETL-NF800 – OETL-NF1200 6.30/160 —
OETL-NF1600 – OETL-NF3150 12.00/305 —
B NOTE: Handle(s) not included.
NOTE: OETL-ZW15 is the only mechnical interlock
OETL-NF1200 – OETL-NF3150 can use.
A
Dimensions in Inches
& mm
A B
OETL-ZW3 11.81 0.47
300.0 12.0
OETL-ZW14 9.84 0.47
250.0 12.0
OETL-ZW15 19.69 0.47
500.0 12.0
19
OETL-ZW3, 14, 15
1 Deeper enclosures will require a longer shaft. Please select a 12mm shaft from page 19.7 and an OETL-ZX95 shaft extension coupler from page 19.10.

Di
s
sw con
me h ct
for Handles ns es
ion
00.00 Inches
s
00.00 [Millimeters]
Selector handles for base and DIN rail mounted switches Selector handles for door mounted switches
OH_S1AH1 & OH_S3AH1 OH_S1P_ & OH_S3P_

0.98
0.98 25
25 1.89
1.89 0.26 48
0.26 6.5
6.5 48
0.125
0.125 3.2
3.2
0.96
0.96 24.5
24.5
0.88
0.55 0.88 0.98 22.5
14 22.5 25
MOUNTING HOLE
MOUNTING HOLE DETAIL
DETAIL
OH_1P, 3P
OH_1A,3A
OH_S2A_ OH_S1R_ & OH_S3R_

1.30 0.98
25 1.42
33 36
2.56 1.89
0.26 48 0.71 0.71
0.39 65 6.5
10 18 18
0.53
13.5
0.125 0.16 D 0.71

3.2 4 18
B 1.42
36
0.96 0.71
0.88 D 18
24.5 22
0.39 MOUNTING HOLE

10
0.88 DETAIL
22.5
0.55
14
MOUNTING HOLE
DETAIL OH_1R, 3R
OH_2A_
OH_S2P_
1.30
33
2.56
0.39 65
10
0.125
3.2
0.96
24.5
0.98
0.88
25 22.5
MOUNTING HOLE
DETAIL
OH_2P_
OH_S2R_
1.30 1.89
33 48
0.39
10
2.56
65
1.42
36
19
0.71 0.71
18 18
0.53
13.5
0.16 D 0.71
4 18
1.42 1.89
36 48
0.71
0.88 D 18
22
0.39
10 MOUNTING HOLE
DETAIL
OH_2R_

ct
o he s
sc
Di witc sion for Handles
s en
m
Di 00.00 Inches
00.00 [Millimeters]
Pistol handles
1.77 2.66 B
45 67.5 A L Shaft size NEMA / UL Type
Catalog number Inches/ mm Inches/ mm
2.09 OH_45J6 1.8/45 0.24/6 1, 3R, 12

B 53 OH_65J6 2.6/65 0.24/6 1, 3R, 12
0.24 OH_80J6 3.1/80 0.24/6 1, 3R, 12
0.20
5 D
6 OH_125J12 4.9/125 0.47/12 1, 3R, 12
OH_145J12 5.7/145 0.47/12 1, 3R, 12
OH_175J12 6.9/175 0.47/12 1, 3R, 12
1.22 D
31 OH_80L6 3.1/80 0.24/6 1, 3R, 4, 4X, 12
45°
OH_145L12 5.7/145 0.47/12 1, 3R, 4, 4X, 12
L OH_175L12 6.9/175 0.47/12 1, 3R, 4, 4X, 12
MOUNTING HOLE __ = Handle color, B (Black) or Y (Red/Yellow)
DETAIL
3.94
100 2.76
1.57 70.0
40
B
2.20
56 B
A L Shaft size NEMA Type
0.28 D
7 catalog number inches/mm inches/mm
YASDA-7 8.66/220 0.47/12 1, 3R, 4, 4X, 12
YASDA-8 8.66/220 0.47/12 1, 3R, 4, 4X, 12
1.77 D
45° 45 YASDA-21 8.66/220 0.47/12 1, 3R, 4, 4X, 12
YASDA-6 12.60/320 0.47/12 1, 3R, 4, 4X, 12
MOUNTING HOLE
DETAIL
1.22 .20 0.24

METAL HANDLE
1.46 31 5 6
37
19
2.72
Ø
69
2.01
51
2.09
53
2.09
53
Handle type type

Handle OHM45L5 OHM65L5
OHM65L6 OHM65L6
OHM125L12OHM125L12 OHM175L12
OHM175L12 OHM275L12
OHM275L12
L L 1.8/45 2.6/65
2.6/65 2.6/65 4.9/125 4.9/125 6.9/175
6.9/175 10.8/27510.8/225
B .2/5 .2/5 .2/6 .5/12 .5/12 .5/12
B .24/6 .47/12 .47/12 .47/12

Di
s
sw con
me h ct
for Handles ns es
ion
00.00 Inches
s
00.00 [Millimeters]
OH_274_12
71
54
274
Ø69
,4
OH-274J12
OH_330_12
70,7
53,9
329,00
A Catalog B shaft size

L inches/mm NEMA Type
number inches/mm
OHB274-330 10.75/274 0.47/12 1, 3R, 4, 4X, 12
19

ct
o he s
sc
Di witc sion 2, 3 & 4 Pole 2
s en
m 30A – 1200A Fusible
Di 00.00 Inches
00.00 [Millimeters]
Fusible
H W D MH MW H W D MW
Frame Enclosure mtg. mtg. Weight Frame Enclosure mtg. mtg. Weight
size type height width depth height width size type height width depth height width
1 10.0 8.0 6.0 7.0 7.0 12

1 44.0 22.0 11.0 37.5 22.5 150
3R 10.0 8.0 6.0 10.75 6.0 12
3R 44.0 22.0 11.0 37.5 22.5 150
4 10.0 8.0 6.0 10.75 6.0 12
OS30_ OS400_ 4 44.0 22.0 11.0 37.5 22.5 150
4X SS 10.0 8.0 6.0 10.75 6.0 12
4X SS 44.0 22.0 11.0 37.5 22.5 150
4X Plastic 10.0 8.0 8.0 10.75 6.0 8.0
4X Plastic 1 1 1 1 1 1
12 10.0 8.0 6.0 10.75 6.0 12
12 44.0 22.0 11.0 37.5 22.5 150
1 14.0 12.0 8.0 7.0 7.0 13
1 42.0 36.0 12.0 43.5 34.5 150
3R 14.0 12.0 8.0 10.75 6.0 13
3R 42.0 36.0 12.0 43.5 34.5 150
4 14.0 12.0 8.0 10.75 6.0 13
OS60_ 4 42.0 36.0 12.0 43.5 34.5 150
4X SS 14.0 12.0 8.0 10.75 6.0 13 OS600_
4X SS 42.0 36.0 12.0 43.5 34.5 150
4X Plastic 10.0 8.0 8.0 10.75 6.0 9.0
4X Plastic 1 1 1 1 1 1
12 14.0 12.0 8.0 10.75 6.0 13
12 42.0 36.0 12.0 43.5 34.5 150
1 14.0 12.0 8.0 11.0 9.0 22
1 48.0 24.0 12.0 49.5 22.5 170
3R 14.0 12.0 8.0 14.75 10.0 22
3R 48.0 24.0 12.0 49.5 22.5 170
4 14.0 12.0 8.0 14.75 10.0 22
OS100_ 4 48.0 24.0 12.0 49.5 22.5 170
OS800_
4X SS 14.0 12.0 8.0 14.75 10.0 22
4X SS 48.0 24.0 12.0 49.5 22.5 170
4X Plastic 14.0 12.0 8.0 14.75 10.0 16
4X Plastic 1 1 1 1 1 1
12 14.0 12.0 8.0 14.75 10.0 22
12 48.0 24.0 12.0 49.5 22.5 170
1 24.0 16.0 8.0 25.5 14.5 75
1 60.0 36.0 12.8 62 38 200
3R 24.0 16.0 8.0 25.5 14.5 75 3R 60.0 36.0 12.8 62 38 200
4 24.0 16.0 8.0 25.5 14.5 75 4 60.0 36.0 12.8 62 38 200
OS200_ OS1200_
4X SS 24.0 16.0 8.0 25.5 14.5 75 4X SS 60.0 36.0 12.8 62 38 200
4X Plastic 1 1 1 1 1 1 4X Plastic 1 1 1 1 1 1
12 24.0 16.0 8.0 25.5 14.5 75 12 60.0 36.0 12.8 62 38 200
1 Please consult factory, enclosures are sized to suit specific customer needs.
2 Some 4-pole switches require larger enclosures. Please consult factory. W D
H MH
MW
19

Di
s
sw con
me h ct
2, 3 & 4 Pole 3 ns es
ion
00.00 Inches 16A – 3150A, Non-fusible s
00.00 [Millimeters]
Non-Fusible
H W D MH MW H W D MW
Frame Enclosure mtg. mtg. Weight Frame Enclosure mtg. mtg. Weight
size type height width depth height width size type height width depth height width
1 6.0 6.0 4.0 4.0 4.0 4.0

1 24.0 16.0 8.0 25.5 14.5 50
3R 6.0 6.0 4.0 7.75 3.0 4.0
3R 24.0 16.0 8.0 25.5 14.5 50
OT16_ 4 6.0 6.0 4.0 6.75 4.0 4.0
OT25_ OT200 4 24.0 16.0 8.0 25.5 14.5 50
OT40_ 4X SS 6.0 6.0 4.0 7.75 3.0 4.0
4X SS 24.0 16.0 8.0 25.5 14.5 50
4X Plastic 6.0 6.0 5.9 6.75 4.0 4.0
4X Plastic 25.0 17.0 10.0 25.5 14.5 40
12 6.0 6.0 4.0 7.75 3.0 4.0
12 24.0 16.0 8.0 25.5 14.5 50
1 8.0 6.0 4.0 7.0 5.0 6.0 1 44.0 22.0 11.0 37.5 22.5 120
3R 8.0 6.0 4.0 8.75 4.0 6.0 3R 44.0 22.0 11.0 37.5 22.5 120
OT63_ 4 8.0 6.0 4.0 8.75 4.0 6.0 4 1 1 1 1 1 1

OT400
OT80_ 4X SS 8.0 6.0 4.0 8.75 4.0 6.0 4X SS 36.0 24.0 12.0 37.5 22.5 130
4X Plastic 8.0 6.0 5.9 8.75 4.0 6.0 4X Plastic 1 1 1 1 1 1
12 8.0 6.0 4.0 8.75 4.0 6.0 12 36.0 24.0 8.0 37.5 22.5 120
1 10.0 8.0 5.0 7.0 7.0 9.0 1 44.0 22.0 11.0 37.5 22.5 120
3R 10.0 8.0 5.0 10.75 6.0 9.0 3R 36.0 24.0 12.0 37.5 22.5 120
OT30 4 10.0 8.0 5.0 10.75 6.0 9.0 4 36.0 24.0 12.0 37.5 22.5 120
OT600
OT60
OT100 4X SS 10.0 8.0 5.0 10.75 6.0 9.0 4X SS 36.0 24.0 12.0 37.5 22.5 120
4X Plastic 10.0 8.0 5.9 10.75 6.0 9.0 4X Plastic 40.0 32.0 13.0 41.2 30.2 120
12 10.0 8.0 5.0 10.75 6.0 9.0 12 36.0 24.0 12.0 37.5 22.5 120
1 60.0 36.0 12.0 61.5 34.5 200
3R 60.0 36.0 12.0 61.5 34.5 200
4 60.0 36.0 12.0 61.5 34.5 200
OT800 -
OT1200 4X SS 60.0 36.0 12.0 61.5 34.5 200
4X Plastic 1 1 1 1 1 1
12 60.0 36.0 12.0 61.5 34.5 200
1 90.0 36.0 24.0 2 2 600
3R 90.0 36.0 24.0 2 2 600
OETL-NF1600 4 1 1 1 1 1 1
OETL-NF2000 4X SS 1 1 1 1 1 1
OETL-NF3150
4X Plastic 1 1 1 1 1 1
12 90.0 36.0 24.0 2 2 600
1 Please consult factory, enclosures are sized to suit specific customer needs.
2 Enclosure is free standing.
3 Some 4-pole switches require larger enclosures. Please consult factory.
W D
H MH
19
MW
600V, 16A - 3150A

2, 3 and 4-pole switches
Enclosure dimensions

ct
n ne s eOT Enclosed switches
o he s
sc
Di witc sion Approximate dimensions
s en
Di
m eOT16_ - eOT45U 00.00
00.00
Inches
[Millimeters]
eOT16_, eOT32_ (enclosure size 1)

in 0,18 0,09
mm 4,5 R2,25 0,79
5,98
152
0,29 1,18
7,40 30
2,99
76
5,51
140
5,98
152
6,35
161,4
1,97
50
3,94 3,19 1,36

81 34,5 1/2 "
4,55 3/4 "
M25
115,5
EOT32U_ , EOT45U_
Handle OHB 2AJ Knock-outs M20 Knock-outs on top and bottom
eOT45U_ (enclosure size 2 with selector handle)
mm 30.5
in 146 1.20
5.75 188
20 7.40
0.79
40.3
1.59
88
200 3.46
7.87
188
7.40
176
6.93
Ø 4.5
73 0.18 103.5 34.5
2.87 4.07 1.36
138
5.43
EOT32U_ , EOT45U_
eOT45U_ (enclosure size 2 with pistol grip handle)
mm 30.5
in 146 1.20
5.75 188
20 7.40
0.79
40.3
1.59
88
200 3.46
7.87
188
7.40
176 3/4 " 1 " 3/4 " 1 "
6.93
Ø 4.5
73 0.18 103.5 45
2.87 4.07 1.77
19 148.5
5.84

Di
s
sw con
eOT Enclosed manual motor controllers Di itc ne
me h ct
Approximate dimensions ns es
ion
00.00
00.00
Inches eOT63_ s
[Millimeters]
eOT63_ (enclosure size 3 with pistol grip handle)
19

ABB Disconnectors

Uploaded by

Copyright:

Available Formats

ABB Disconnectors

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ABB Disconnectors

Uploaded by

Copyright:

Available Formats

Di

Non-fusible and fusible disconnect switches...........19.1 - 19.6 Accessories............................................................19.29 - 19.40

Fusible disconnect switches.................................19.19 - 19.28 Technical data.........................................................19.49 - 19.66

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Incoming power feeds

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Positive opening operation

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Welded contact protection

Clear position indication

Track resistant material

Constant control for non-fusible disconnect switches

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Superior short circuit protection

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

For OT30, OT60, OT100, OT200, OT400, OT600, OT800, OT1200

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

OT16F3 OT25F3 OT40F3 OT63F3 OT80F3 OT30F3 OT60F3 OT100F3

General purpose A 20 30 40 60 80 30 60 100

1 UL listed switches are also CSA approved.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

OT200U03 OT400U03 OT600U03 OT800U03 OT1200U03 OETL-NF1600SW OETL-NF2000SW OETL-NF3150SW

1 UL listed switches are also CSA approved.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Standard part number designation 1

Non-Fusible OT Switches (200A and above)

Number of Poles & Placement of Mechanism

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

For a complete assembly,

2 Pole 3 Pole 4 Pole 2 6 Pole 3

Bulk packed 3 Pole, 600V Switches 5

1 Above 100A, base mount with screws only.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

For a complete assembly,

3 Pole 3 Bulk packs

UL general purpose IEC AC21 Catalog Bulk pack Bulk pack

1 Door mounted switches do not provide door interlock

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

For a complete assembly,

OETL-NF400-S OXP12x325 OHB145J12E00S

Side operated switches — 3 pole

For use with OSNF30-S

For use with OSNF60-S — OSNF100-S

For use with OETL-NF400-S — OETL-NF600A-S

Terminal lug kits

OZXA-26 1 Fused switches with solid links installed.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Switch Handle Shaft

30A -100A Flange operated — non fusible switches (Shaft)

1, 3R, 12 OFF/ON Yes Yes DSFHN-HS12

Door hardware NEMA 12

Flange operated fusible and non-fusible disconnect switches

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Switch Handle Cable Lug kit (as required) Operating mechanism 1

Flange handles — UL98; UL file #E101914

1 Operating mechanism required for OT30 - OT200

Low Voltage Products & Systems

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

OHBS2AJ1 OHBJ6 OHYJ6 YASDA-8 OHM125L12 OHB4