Starrett Catalogue
Starrett Catalogue
Starrett Catalogue
Quality
I n no v a t i o n
Catalogue 32E
starrett.co.uk
performance.
Today, Starrett offers five product categories: Precision Measurement Tools,
Metrology Equipment, Granite-based Engineered Solutions, Saw Blades, and
Jobsite and Shop Tools.
Whether you need to modify a standard tool, require assistance in selecting the
best saw blade for your cutting application or desire a custom solution for your
business, we have the breadth of knowledge to assist you.
We are committed to providing you with complete solutions created for your
exact needs. Problem solving is part of what we do every day. If the right
tool for your application does not exist, contact us we would appreciate the
opportunity to build it.
Table of Contents
Micrometers. . . . . . . . . . . . . . . . . . . . . . . 1
Electronic Outside. . . . . . . . . . . . . . . . . . . . . 2
Mechanical Outside . . . . . . . . . . . . . . . . . . . 4
Special Function Outside . . . . . . . . . . . . . . . 7
End Measuring Rods. . . . . . . . . . . . . . . . . . 12
Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Inside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Slide Calipers . . . . . . . . . . . . . . . . . . . . . 19
Electronic. . . . . . . . . . . . . . . . . . . . . . . . . . 20
Vernier . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
38
40
42
44
50
53
54
55
60
64
65
66
68
Fixed Gauges . . . . . . . . . . . . . . . . . . . . . 69
Precision Shop Tools . . . . . . . . . . . . . . . 75
Precision Levels. . . . . . . . . . . . . . . . . . . . .
Edge Finders. . . . . . . . . . . . . . . . . . . . . . . .
Calipers & Dividers. . . . . . . . . . . . . . . . . . .
Pin Vises. . . . . . . . . . . . . . . . . . . . . . . . . . .
Scribers. . . . . . . . . . . . . . . . . . . . . . . . . . .
Tap Wrenches. . . . . . . . . . . . . . . . . . . . . . .
Punches. . . . . . . . . . . . . . . . . . . . . . . . . . .
Precision Gauge Blocks . . . . . . . . . . . . . . .
Saw Tension Gauge . . . . . . . . . . . . . . . . . .
76
78
79
80
81
81
82
86
87
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
ii
Suzhou, China
iii
Precision
At Starrett, we understand precision. For generations, the precision that we
build into our products has allowed our customers to ensure the quality of
their products. Precision is something we take very seriously.
Primary Standards
To ensure accuracy, manufacturers must enforce strict quality control
processes. This starts with applying primary standards for measurement and
inspection. This will ultimately lead to consistent, reliable gauging results.
Precision gauge blocks are the primary standards vital to dimensional
quality control in the manufacture of interchangeable parts. These blocks
are used for calibrating precision measuring tools and for setting numerous
comparative type gauges.
However, even gauge blocks are held to their own level of higher
standards-- Grand Master Blocks.
Accuracy
Starrett precision measuring tool accuracies are
based on their traceability through our grand master
gauge blocks as certified by the National Institute of
Standards and Technology (NIST).
Worldwide, no one else has produced the accuracy and
stability of Starrett-Webber croblox Grand Masters.
They were produced in 1955 out of chromium carbide
material to an accuracy within one millionth of an inch
(.0000254mm) and have been checked periodically
by the National Bureau of Standards and the National
Institute of Standards and Technology (NIST). They
have remained stable over this period.
iv
Quality
Starrett precision measuring products are inspected for accuracy
with standards traceable to our grand master gauge blocks.
After a period of use, precision measuring tools require regular
preventative maintenance, periodic calibration and, sometimes,
repair.
Starrett facilities worldwide offer a variety of repair and calibration
services, and have earned appropriate accreditations and
certifications as detailed below.
INMETRO
Administered by N.I.S.T.
Lab Code 200038-0
Innovation
Application-Focused
Custom Solutions
Your Application
Define Application
Measurement requirement
Workpiece shape
Workpiece variations
Tolerance requirements
Throughput requirements
Data output requirements
Unique considerations
Catalogue Product
Measuring
Solution?
No
Consultation
Design
Concept
Approval?
No
Yes
Measuring
Solution?
Build
Prototype
Yes
No
Test &
Evaluate
Measuring
Solution?
No
vi
Yes
Yes
Solution
vii
viii
Micrometers
795MEXFL-100
796MXFL-25
Range
0-25mm / 0-1"
25-50mm / 1-2"
50-75mm / 2-3"
75-100mm / 3-4"
796 Electronic Micrometers without output
0-25mm
795 Electronic Micrometer Accessories
1m Shielded Cable to Starrett 795
2m Shielded Cable to Starrett 795
3m Shielded Cable to Starrett 795
Adaptor from PT62680-1, PT62680-2 and PT62680-3 to PC (RS232)
* Not Stocked
Millimetre/inch conversion
Measurement HOLD button
Ability to zero tool at any position as
well as retain and return to the true
zero reading of the micrometer
Resolution: 0.001mm
Accuracies: 0.002mm
795 micrometers include RS232
output
Output data to Starrett SPC Plus
hardware and software and to PCs
796MXFL-25
69084
PT62680-1*
PT62680-2*
PT62680-3*
PT61768*
62021
62022
62023
66454
3732MEXFL-25
3732MEXFL-100
733MEXFL-25
Range
0-25mm
25-50mm
50-75mm
75-100mm
100-125mm
125-150mm
0-.984"
.984-1.968"
1.968-2.953"
2.953-3.937"
3.937-4.921"
4.921-5.905"
Resolution
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
0-.984"
.984-1.968"
1.968-2.950"
2.950-3.930"
3.930-4.920"
4.920-5.900"
Accuracy
0.002mm
0.00005"
0.003mm
0.001mm
0.0001"
0.0001"
0.001mm
.00005"
.00005"
0.004mm
0.002mm
0.003mm
0.0001"
0.001mm
.0001"
0.004mm
Description
Computer Interface Cable Complete to PC (RS232C)
Adaptor from PT22938 Cable to PC (RS232C)
Shielded Cable to 761/772 Starrett Modules and PT61768 Adaptor
* Not Stocked
All except 733MEXFL-25 furnished with standards.
Accuracies above 25mm are as good as setting to a gauge because the mechanical and electronic components are the same on all ranges.
436 Outside
Micrometers & Sets
0-600mm
The most popular precision
micrometers used by skilled workmen
worldwide
Accurate, rugged, and easy to use
Anvils sized at 6.35mm diameter
436.1MXL-50
Readability
Starrett satin chrome finish no glare
resists rust
Advanced sleeve design with
staggered lines and distinct figures for
precise and easy readability
Ease-of-Handling
Rachet stop
Carbide measuring faces
Balanced frame and thimble design
ensure easy handling
Ring-type knurled lock nut for quick
and sure locking
Range
0-25mm
25-50mm
50-75mm
75-100mm
100-125mm
125-150mm
Graduation Description
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
Ratchet Stop, Lock Nut, Carbide Faces
0.001mm
0.01mm
0.001mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
0.01mm
Sets
S436MEXRLZ
52014
0-300mm
0.01mm
S436.2MCXRLZ
12776
0-150mm
0.01mm
444MXRL150
Range
0-25mm
25-50mm
50-75mm
75-100mm
100-125mm
125-150mm
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Description
Outside Micrometer Stand
224
Interchangeable
Anvil Micrometers
0-600mm
Unusual flexibility, plus a wide range of
measurement makes the Starrett 224
satin-chrome micrometers very popular in
machine or automotive repair shops and
for all applications requiring a versatile
micrometer.
Each micrometer is equipped with a
series of easily interchangeable anvils,
thus providing the full range in steps of
25mm with a single micrometer. Suitable
wrenches are furnished to make necessary
adjustments.
224MAARLZ
in Case
Readability features
Starrett satin chrome finish no glare
resists rust
Advanced sleeve design with
staggered lines and distinct figures for
precise and easy readability
224MAARLZ pictured
without case
Ease-of-Handling Features
Balanced frame and thimble design
ensure easy handling and better
readability
Ring-type knurled lock nut for quick
and sure locking
Combination ratchet and speeder
for uniform pressure and quicker
adjustment
256MPN-25
Readability Features
Starrett satin chrome finish no glare resists rust
Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Quick-reading figures
Ease-of-Handling Features
256MRL-50
EDP
51238
56470
55942
55943
486MP-25
483MXRL-25
Readability Features
Readability Features
Quick-reading figures
Ease-of-Handling Features
Balanced frame and thimble design ensure easy handling
and readability
Ease-of-Handling Features
Balanced frame and thimble design ensure easy handling
and better readability
Graduation
0.01mm
Graduation
Description
0.01mm
With Speeder
Description
Ratchet Stop, Lock Nut, Tapered Spindle
207MZ
576MXR
577MXP
208MDZ
Capacity:
The 576 can access holes as small as 8mm and measure
up to 13mm
The 577 can access holes as small as 9.5mm and
measure up to 25mm
Readability Features
Starrett satin chrome finish no glare resists rust
Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Ease-of-Handling Features
Balanced frame and thimble design ensure easy handling
and readability
Readability Features
Satin finish stainless steel no glare rust and stain
resistant
Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Quick-reading figures
Ease-of-Handling Features
The 207 has a snub nose which permits measuring
aerosol type cans
66442
0-13mm
0.01mm
577MXP
66444
0-25mm
Description
Ratchet Stop, Full Finish
Tapered Frame, Carbide Faced
Spindle
Full Finish Tapered Frame,
Carbide Faces
207 & 208 Stainless Steel Can Seam Micrometers (0-9.5mm Range)
Cat. No.
EDP
Graduation
Description
207MZ
64337
Snub Nose for Aerosol Cans
208MZ
64338
0.01mm
Without Depth Gauge
208MDZ
63191
With Depth Gauge (5mm Range)
Ease-of-Handling Features
Balanced frame and thimble design ensure easy handling,
better readability
220MXRL-25
Readability Features
Starrett satin chrome finish no glare resists rust
Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Quick-reading figures
10
Readability Features
Starrett satin chrome finish no glare resists rust
Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Ease-of-Handling Features
Balanced frame and thimble design ensure easy handling and
better readability
Combination ratchet and speeder for uniform pressure and
quicker adjustment
11
263MRL
25-600mm
They are made of special tool steel in rod form with ends
hardened and accurately lapped to a spherical radius.
Supplied with insulated handles to minimize expansion by heat
when held in the hand. 25-150mm sizes are 6.3mm diameter;
175-275mm sizes, 9.5mm diameter; 300mm size is 11mm
diameter.
12
Cat. No.
234MA-25
234MA-50
234MA-75
234MA-100
234MA-125
234MA-150
234MA-175
234MA-200
234MA-225
234MA-250
234MA-275
234MA-300
EDP
50970
50972
50974
50976
50978
50980
50982
50984
50986
50988
50990
50992
0-25mm
0.01mm
0.001mm
EDP
Description
263MP*
51275
Plain
263ML*
51276
Lock Nut
263MRL*
51257
V263MRL*
55962
463MRL
460MB
0-13mm
0-13mm
50.8mm
16mm
6mm
10mm
5.999mm
5.989mm
3.510mm
3.500mm
66.7mm
9.5mm
19.0mm
5.080mm
5.078mm
9.523mm 14mm
9.510mm
63MRL
0-50mm
85.7mm
19.0mm
42mm
9.5mm
5.080mm
5.078mm
9.523mm
9.510mm 14mm
9.5mm
83mm
19mm
5.97mm
12.000mm
+.000
or
12.700mm -.007
16mm
16mm
Cat. No.
460MB
EDP
64447
Description
Plain
0-13mm
463MP
463MRL
52444
52452
Plain
Ratchet Stop, Lock Nut
63MRL*
55939
0.01mm
10mm
63 Micrometer Heads
0-50mm 0.01mm
* Specify clamping diameter 12mm or 12.7mm. 12.7mm sent unless otherwise ordered.
13
762MEXFL-50
Ease-of-Handling Features
157mm
6-3/16"
12.700mm
.4994"
6.35mm
.250"
32mm 19mm
1-1/4" 3/4"
12mm
3/4"
22mm
7/8"
19mm
3/4"
56 mm
2-3/16"
41mm
1-5/8"
44mm
1-3/4"
58mm
2-9/32"
48mm
1-7/8"
0-25mm dimensions
204mm
8-3/64"
Millimetre/Inch conversion
Turn on in millimetre mode after battery installation
12.700mm
.4994"
6.35mm
.250"
80mm
3-5/32"
48mm
1 7/8"
19mm
3/4"
Resolution
Accuracy
Inch
.00005"
.0001" per Inch
38mm
1-1/2"
19mm
3/4"
57mm
2-1/4"
22mm
7/8"
19mm
3/4"
41mm
1-5/8"
44mm
1-3/4"
0-50mm dimensions
14
56mm
2-3/16"
EDP
66077
66137
66636
66454
64059
440MRL
449MA
EDP
52116
52120
52124
52221
52225
52229
56636
56637
56638
56639
15
Readability Features
Large high-contrast LCD digital readout
Resolution: 0.001mm
Millimetre graduations standard
No-glare black wrinkle finish frame
No-glare satin chrome finish on thimble and sleeve
Ease-of-Handling Features
Ring-type knurled lock nut
Combination ratchet and speeder
749 Electronic Micrometer Depth Gauges, Standard Millimetre Graduations on Shell and Thimble
Cat. No.
EDP
Description
749MEBZ-150
66124
0-150mm Range, with Case
Cable Information for 749 Electronic Micrometer Depth Gauges
Part No.
EDP
Description
PT61963*
66636
Computer Interface Cable Complete to PC (RS232C)
PT61768*
66454
Adaptor from PT22938 Cable to PC (RS232C)
PT22938*
64059
Shielded Cable to 761/772 Starrett Modules and PT61768 Adaptor
* Not Stocked
16
749MEBZ-150
124MAZ
Screw Movement
13mm
13mm
25mm
Measuring Rods
6
10
4
Spacing Collars
One 12mm
One 12mm
One 25mm Two 50mm
With Case
Cat. No.
124MAZ
124MBZ
124MCZ
EDP
56141
56142
56143
17
The extension rods are made of steel tubing, light in weight, yet
extremely rigid. Rods are approximately 9.5mm diameter to meet
the requirements of mechanics who prefer this larger diameter.
By removing the hardened and ground anvil ends (end caps) of
the micrometer head, the rods may be attached to either or both
ends of the micrometer as preferred. Each rod may be individually
adjusted for wear by the hardened and ground anvil at the end.
Tubular measuring rods are lightweight, yet extremely rigid.
Rods are insulated, with the exception of 13mm and 25mm
sizes
Each rod is marked with length
Hardened and ground anvils on rods are adjustable for length
Head anvil is hardened and ground
Interchangeable anvils on both 13mm and 25mm heads
Rods attachable as
shown to either one
or both ends of the
head ensures the
best balance, feel,
and ease of reading
Cat. No.
823MAZ
823MBZ
823MEZ
Each set furnished in attractive, protective case with assembly instructions for various measurements.
18
EDP
53051
53053
53057
Slide Calipers
19
0-300mm
Large, easy to read LCD, 7.874mm/.310" character height
IP67* protection
IP67
200mm
300mm
Outside
38mm
47.6mm
63.5mm
Inside
16mm
19mm
19mm
Cat. No.
798B-6/150
798A-6/150
798B-8/200
798A-8/200
798B-12/300
798A-12/300
EDP
12521
20798
12523
20799
12525
20800
Cat. No.
PT26151*
PT22431*
PT63329*
PT63329-1*
EDP
64440
64640
12732
12733
* Not Stocked
20
21
799 Electronic
Calipers
0-1000mm / 0-40"
Starretts 799 Electronic Calipers are light,
comfortable, easy-to-use, and constructed
with features that have made Starrett slide
calipers the machinists first choice for
many years.
The 799 offers a slim, streamlined profile,
a large, clear, easy-to-read LCD display,
long battery life, and function buttons for
zero and mm/inch.
799 calipers are available in 150, 200,
and 300mm sizes and the newly available
extended range 600mm and 1000mm. All
sizes furnished in a fitted, protective case.
22
799AZ-24/600
799A-12/300
799A-8/200
799A-6/150
Cat. No.
799A-6/150
799A-8/200
799A-12/300
799AZ-24/600
799AZ-40/1000
EDP
67410
67412
67621
11978
11979
Cat. No.
PT26151*
PT22431*
EDP
64440
64640
799AZ-40/1000
* Not Stocked
Outside
Inside
1000mm
150mm
17.46mm
23
0-300mm / 0-12"
0-300mm
With the ability to provide quick, accurate measurement of O.D., I.D. and
depth, the dial caliper is the most versatile precision hand tool on the
market.
1202 Dial Calipers are based on the caliper that has been the
first choice of metal working professionals for decades. 1202 Dial
Calipers are available in 150, 200 and 300mm versions.
Readability Features
Sharp, clear dial graduations of 0.025mm with 2.54mm per
revolution
Sharp, black graduations on the satin finished bar, every
2.54mm
Ease-of-Handling Features
Knife-edge contacts
Thumb-operated fine adjustment roll
Adjustable bezel
Lock screws for sliding jaw and dial bezel
Covered rack depth rod (150 and 200mm models)
24
Graduations
0.02mm
0.02mm/0.001"
0.05mm
0.02mm
0.02mm/0.001"
0.05mm
0.02mm
0.02mm/0.001"
0.05mm
Cat. No.
125MA-150
125MEA-6/150
125MB-150
125MA-200
125MEA-8/200
125MB-200
125MA-300
125MEA-12/300
125MB-300
EDP
61880
61660
61881
61884
61882
61885
61888
61886
61889
Cat. No.
1201M-150
1201M-200
EDP
66962
66976
1202M-150
1202M-200
1202M-300
66963
66977
66978
25
3753 Electronic
Depth Gauges
0-300mm / 0-12"
The Starrett 3753 Electronic Depth
Gauge is light and easy to use for depth
measurements within its range.
Readability Features
Clear, easily-read numbers, properly
sized for the tool
26
Readability Features
Easy-to-read LCD 8mm / .32" high characters
27
3752-12/300
Battery Life
1-1/2+ years battery life. Two 3-volt batteries furnished
(CR2450)
3752-24/600
28
On/Off Button
(auto off after 30
minutes of nonuse)
Primary: mm/in
Toggles metric or
inch readout
Secondary: LIMITS
min/max tolerance
specifications at
any position
Button
Toggles polarity or
direction change
Hold Button
retains current
reading at any position
Cat. No.
3752-12/300
3752-24/600
EDP
68815
68816
Cat. No.
EDP
PT22938*
64059
PT61768*
66454
* Not Stocked
29
Features
A unique, ergonomically shaped
base, hardened and ground, that fits
your grip just right to easily move the
gauge and press the hot key
Specifications:
Measuring Range
Resolution
Accuracy
Repeatability
Power Source
Included
Accessories
Dimensions
Weight
Perpendicularity
30
.078" (2mm)
Carbide Contact Point,
PT23914
.400" (10.2mm)
Cylindrical Probe
PT27945
Cat. No.
2000-24*
PT27937*
PT27940*
PT27944*
EDP
67008
67009
67010
67011
S2000AZ*
PT27948*
PT23942*
PT23914*
PT23943*
PT27952*
PT27945*
PT27950*
PT27949*
PT27946*
PT62011*
PT62130*
PT62131*
PT62103*
66997
67012
65255
64222
65256
67013
67014
67015
67016
67017
67018
67003
67004
67019
* Not Stocked
31
32
Cat. No.
3259M-300
3259M-600
3259-AC
EDP
12570
12580
69909
33
34
Cat. No.
EDP
S829EZ
53074
S831EZ
53087
579 self-centering
telescoping
gauges with two
telescoping arms
8-150mm
Two telescoping contacts
Handles are rigidly attached to
the contact plungers and are
automatically self-centreing
Constant spring tension gives uniform
contact pressure
Both plungers are easily locked at any
desired setting
Cat. No.
EDP
S579GZ
52616
S579HZ
52617
35
Features
Non-slip insulating grip
Carbide contacts for extended wear
Aluminum case with gauge and
accessory cutouts
Gauge chart for quick and easy anvil
selection
2-point contact
0.01mm graduations
36
Contacts
8
9
9
4
12
5
5
9, 4, 12
Spacers
0.5
0.5 & 1mm
0.5, 1, 2 & 3mm
0.5, 1, 2, 3 & 6mm
0.5, 1, 2, 3 & 6mm
-
Extension
55mm
50 & 100mm
50mm
Cat. No.
3089M-181-10J
3089M-181-18J
3089M-181-35J
3089M-181-50J
3089M-181-160J
3089M-181-250J
3089M-181-450J
S3089MZ-181-160J
EDP
12199
12200
12201
12202
12203
12204
12205
13015
Indicators
Gauges
37
AGD Group 2
2900 Electronic
Indicators
Innovative, Full Featured & Tough
2900 Electronic Indicators are available in
a choice of configurations to meet a range
of requirements. Innovative True Absolute
Sensor Technology minimizes the chance
of data loss for exceptional reliability.
Built with IP67 protection and customary
Starrett quality, they maintain their
reliability in hostile shop environments.
Features
True Absolute Sensor Technology
remembers position and zero set point
even during battery replacement.
Cannot be over-sped into failure.
Intuitive design and layout easy to
learn and use
Positive, tactile-feel button activation
2900-6M
Features by Model
3-Button Basic
6-Button Standard
6-Button Advanced
Power ON/OFF
Data Output
Limit Set
Value Preset
Reading Hold
Feature Lock
Resolution
Range
Cat. No.
EDP
.001mm
12mm
2900-1M
09986
.01mm /.001mm
12mm
2900-4M
09988
.01mm /.001mm
12mm
2900-6M
09990
PT99492
65650
38
AGD Group 2
3600 Electronic
Indicators
Ranges up to 12.7mm
3600 Electronic Indicators have simple,
powerful, easy-to-use functions, all at an
attractive price. Versions are available for
inch/metric and metric only.
Features
Large, easy-to-read LCD
Range: 12.7mm / .500"
Resolution: .01mm / .0005"
Power On / Off button
Reverse travel ( control indicates
direction)
Zero setting at any position
Long battery life
8mm diameter stem
M2.5 X .45 thread
Lug-on-centre back with additional flat
back
Dust cap
Plastic storage case with clear cover
3600 Indicator
Range
12.7mm
Resolution
0.01mm
Cat. No.
3600M-5
EDP
68918
39
3025-481
3809MAC
3025-257J
Lug-on-centre back
Dovetail Clamp
with 9.5mm Post
Contact Point
Wrench
40
Range
1mm
10mm
5mm
20mm
5mm
Grad.
0.001mm
0.01mm
0.01mm
0.01mm
0.01mm
Dial Reading
0-200
0-100
0-100
0-100
0-100
Range
0.2mm
0.2mm
0.8mm
0.8mm
Grad.
0.002mm
0.002mm
0.01mm
0.01mm
Dial Reading
0-100-0
0-100-0
0-40-0
0-40-0
* Includes two additional contacts and wrench, swivel post snug with dovetail indicator clamp,
and tool post holder.
196MB1
196R, 196MR
PT05471
PT05472
PT05473
Smooth in operation
0.02mm graduations
6.3mm shank diameter
For full use, the operator first chooses the proper contact from
the three hardened contact points that come with each model.
The contact should then be brought against the work with enough
pressure to give the hand one full turn. Set the hand at zero by
rotating the dial with the knurled bezel. This provides one full
rotation of the hand both to the right and left of zero, showing a rise
or drop in the work and the amount of that variation.
Contact Points and Adaptors Only for 196 Universal Back Plunger Dial
Indicators
Description
Cat./Part No.
EDP
Adaptor**
196R*
50711
Adaptor (Metric Threads)
196MR*
67457
PT05471*
70617
Hardened Steel Contact Point
PT05472*
70618
PT05473*
70619
* Not Stocked
** For Contact Points with #4-48 Thread, see AGDContact Listings.
Cat No.
196MA1Z
196MB1
196MA5Z
196MB5
EDP
65251
65252
65253
65254
*** Attachments include clamp, tool post holder, snug and hole attachment.
41
42
Cat. No.
653
EDP
55917
EDP
68621
3657AA
3657MTW
Cat. No.
661
EDP
68620
Cat No.
EDP
3657AA
68849
3657MTW
12696
Description
Magnetic Base with attachments: Upright Base
Post, Snug, Rod, Indicator Attachment
Magnetc Base Flex O Post Indicator Holder
43
0-25mm
Jeweled bearings
44
Dial Reading
0-100
Ergonomic grip
Cat. No.
1015MA-100
3015MA
EDP
67647
11661
Features:
Supplied with two sets of jaws, both readily interchangeable
Three sets of contacts are furnished that can be attached
to the ends of the jaws without replacing the entire jaw.
Contacts have flush ends so that grooves at the bottom of
blind holes can be gauged. The contacts are hardened steel
with a hard chrome finish for long life
32mm
MAX. Gauging DEPTH
0.61mm
2.54mm
UPPER
JAW
PT30916
WILL
ENTER
9.5mm
MIN.
BORE
76.2mm
GROOVE I.D.
LOWER
JAW
PT30914
CONTACT MOUNTING
SCREW 08272-0
STYLE 1-10
64mm
MAX. Gauging DEPTH
UPPER JAW
PT30915
A
MAX.
GROOVE I.D.
WILL
ENTER
MIN.
BORE
LOWER
JAW
PT30913
CONTACT
MOUNTING SCREW
PT03497
Graduation
0.01mm
Reading
100
Range
2.5mm
Cat. No.
1175MZ
EDP
65032
Will Enter
Minimum Bore
9.5mm
17.5mm
25mm
Maximum
Groove I.D.
75mm
125mm
150mm
Minimum
Groove Depth
2.5mm
3.6mm
6.7mm
Minimum
Groove Width
0.6mm
0.8mm
1.3mm
45
696 Crankshaft
Distortion Dial/
Strain Gauge
61458mm
Ideal gauge for checking bearing alignment
or shaft deflection without dismantling
the engine. Also useful as a strain gauge
on engine frames. This inside measuring
gauge checks the distortion of crankshaft
webs and bears a direct relation to existing
misalignment or excessive bearing wear.
Used on all diesel engine shafts and centre
crankshafts on any type of engine or
compressor, the gauge can also be applied
as a strain gauge on engine frames while
the engine is operating. A comparison of
readings taken at top and bottom positions
indicates any misalignment of cylinder and
frame which results in local over-stress
and eventual cracking of the frame neck.
With a special spring tension in the dial
indicator, the gauge is self-sustaining in
any position without sacrificing necessary
rigidity, leaving the operators hands free.
Hardened and ground to a sharp point,
conical contact points have an approximate
60 included angle, and will stay in place
on 45 surfaces.
696M Crankshaft Distortion Dial/Strain Gauges
Dial Indicator
Range
Graduation
Dial Reading
61-458mm
0.02mm
0-50-0
Description
Millimetre Strain Gauge with Balancing Attachment
Gauge furnished with 10 rods, sharp points and balancing attachment in attractive, protective case.
46
Cat. No.
696MZ
EDP
52902
Fig. 1
Fig. 3
Fig. 2
Strain Gauge
Oil Pipe
Distortion of flange
from misalignment.
Cylinder
Engine
Frame
A
Drain Pipe
B
Strain Gauge
Fig. 4
Strain Gauge
C-Clamp on rib
Crack from
unsymmetrical strain
47
48
Dial Reading
0-50-0
Cat. No.
649-1M
EDP
52082
Hardness Testers
Surface Testers
49
Features
Ability to handle Rockwell Scales A through H and K
Stable cast iron construction
Ideal basic hardness testing for many typical applications
50
EDP
67754
72519
67944
67948
67897
67888
67879
67969
Features
Direct analogue dial reading
Advanced design provides Rockwell and Rockwell Superficial
testing
Easy to operate
Engineered to provide highly sensitive and accurate readings
Conforms to ASTM E-18
Tests Rockwell Scales: A, B, C, D, E, F, G, H, K, L, M
Tests Superficial Rockwell Scales: HR15N, HR15T, HR30N,
HR30T, HR45N, HR45Ts
Includes a diamond conical indentor, 1/16" ball indentor, HRC,
HRB, HR15N, HR30N and HR45T test blocks, 5.87 (150mm)
test table, 2.5" (63mm) flat anvil, standard vee anvil,
accessory case and dust cover
A broad range of test blocks and other hardness tester
accessories are available.
Specifications
Minor Load
10 Kgf
Minor Load Superficial
3 Kgf
Major Load
60/100/150 Kgf
Major Load Superficial
15/30/45 Kgf
Test Force Application
Dead Weight
Test Force Control
Manual
Results Display
Dual Scale Dial
Vertical Capacity
15.2mm (6.0")
Throat Depth
14mm (5.5")
Height
66mm (26.0")
Width
46.2mm (18.2")
Depth
23.9mm (9.4")
Weight
113kg (250 lbs)
3815 Twin Analogue Bench Hardness Tester
Description
3815 Bench Hardness Tester, diamond conical and 1.60mm (1/16") ball indentors, HRC, HRB, HR15N, HR30N and HR45T test blocks,
150mm (5.87") test table, 64mm (2.5") flat anvil, standard vee anvil, accessory case and dust cover
Hardness Tester Stand
Cat. No.
EDP
3815*
12800
PT06145*
72519
* Not Stocked
51
Features
Includes base instrument, impact device D, calibrated
test block, custom carry case, cleaning brush and
operation manual
Leeb style tester designed for large, hard parts load the
impact body and place the impact device on your test piece
Easy to use keypad operation push the button to begin
testing and obtain reading
Auto identification of impact device
Large LCD display with back light
USB ouput
Automatic conversions to Rockwell, Brinell, Vickers and Shore
Automatic mean value as well as Min & Max values
Uses two AA alkaline batteries with low power indicator
Memory capacity (100 groups)
Optional impact devices and special support rings
Specifications
Accuracy: +/- 0.5% (referred to L=800)
Repeatability accuracy: +/- 4L units (L=Leeb)
Measuring range: 200-960 HL
For steel & cast steel, alloy tool steel, stainless steel, grey
cast iron, spheroidal iron, cast aluminum, brass, bronze,
wrought copper alloy
Tool steel should be about 25mm (1") thick solid material or larger
Operating temperature: -15-40 / 5-104F
Dimensions: 150 x 74 x 32mm (5.96 x 2.938 x 1.270")
Weight: 245g (8.6 oz.)
3811A Hardness Tester & Accessories
Cat. No.
EDP
Description
3811A
69881
Digital portable hardness tester with impact device D, calibrated test block, cleaning brush and carry case
HT-1800-110*
20940
D+15 Impact Device
HT-1800-115*
20941
DL Impact Device
HT-1800-125*
20942
G Impact Device
HT-1800-130*
20943
C Impact Device
HT-1800-120*
20944
DC Impact Device
HT-1800-100*
20945
Replacement D Impact Device
HT-1800-102*
20946
Replacement Cable For All Impact Devices
HT-2500-105*
20947
Replacement Impact Body
HT-1300-01*
20948
Leeb D Test Block
HT-1100G-01*
20949
Leeb G Test Block
* Not Stocked
52
3805A Electronic
Durometer
The 3805A is a lightweight, ergonomically
designed, reasonably priced durometer
engineered to perform at the highest level
of accuracy.
Capable of measuring hardness in Shore A
values, the most popular scale, the portable
durometer is ideal for fast, convenient
testing of rubber, PVC, leathers, vinyl, acrylic
and other similar materials. Contact is made
with a 35 blunt point, ensuring superior
accuracy.
Features
Accurate and repetitive deviation of
20-90 HA< 1 grade
Resolution of .1HA
Measuring range of 0-100HA
Conforms to ASTM D-2240, ISO 7619
standards
Large, easy-to-read LCD display
Automatic Off
Ability to allow averaging and to lock in
peak value
Weighs only 233 grams (8.2 ounces)
Compact size of 163 x 65 x 28mm
(6.40 x 2.56 x 1.12")
Cat. No.
3805A
EDP
12265
RBR-30*
RBC-63*
RBB-94*
SRB-3*
68197
68198
68199
68200
* Not Stocked
53
54
Cat. No.
3812
EDP
67668
How it Works
A diamond stylus is drawn across the part. The motorized traverse
mechanism is cam driven to ensure that the correct horizontal
distance is traveled.
Vertical movement of the stylus as it travels across peaks and
valleys is detected by a piezo-electric pickup which converts the
mechanical movement of the stylus into an electric signal.
The electrical signal is digitized and sent to a microprocessor
where the parameters are calculated using standardized
algorithms.
Features
Large LCD window
Measures Ra at the touch of a button
In addition to basic roughness parameters Ra and Rz, also
measures advanced Rp, Rv and Rt parameters
Five second cycle time
Result saved until the next measurement is taken
Switches between inch and metric mode without remeasuring
Use right out of the box little or no operator training required
Automatic shut-off after five minutes of inactivity
Configured with the most common industrial settings to ensure
correlation between multiple operators (see specifications)
Simple and reliable calibration routine
Uses standard off-the-shelf calculator type batteries with a
minimum life of 5,000 measurements
Includes SR100 two-piece assembly, calibration standard,
batteries, operation guide and a carrying case
EDP
SR100
20950
Description
SR100 two-piece surface roughness tester assembly,
calibration standard, batteries, operation guide and a
carrying case
SR100 uses an infra-red (IrDA) link between the upper and lower units to
provide remote, cable free operation up to a distance of one metre (40").
Technical Specifications
Gauge range
Accuracy
Pick up type
Gauge force
Stylus
Cut off value
Filter
Traverse length
200m / 0.008"
5% of reading + 0.1m / + 4in
Piezoelectric
200mg / .007 oz.
Diamond, Radius 5m / 200in
0.8mm / 0.03" 15%
2CR
5mm / 0.2"
Traverse speed
2mm/sec, 0.08"/sec
Display units
Battery life
Parameter results
Ra, Rz, Rv, Rp, Rt
Parameters
Ra:
Rz, Rv, Rp, Rt:
Dimensions
m / in
5,000 operations minimum
Overall dimensions
Range
40m / 1600in
199m / 7800in
Resolution
0.01m / 0.4in
0.1m / 4in
Weight
200gm / 7oz
Component dimensions and condition
Min bore
65mm / 2.6"
Min diameter
25mm / 1.0"
Max temperature
35C / 95F
Nominal operating conditions
Temperature
20C / 68F
Humidity
0 to 80% non condensing
Storage conditions
Temperature
0 to 50C / 32F to 122F
Humidity
0 to 80% non condensing
55
Technical Specifications
Pickup
Gauge range
300m/0.012"
Resolution
0.01m/0.04
Accuracy
2% of reading + LSD m
Pickup type
Inductive
Gauge force
150-300mg/.005-.01oz.
Diamond stylus
Tip radius 5m/200" unless otherwise specified
Instrument
Cut off value
0.25, 0.8, 2.5, 8mm / 0.01, 0.03, 0.3"
Filter
2CR or gaussian (selectable)
Traverse length
0.25-25mm / 0.01-0.98"
Traverse speed
1mm/sec, 0.04"/sec
Display units
m / in
Data output
RS232
Power
9V battery or (optional) power supply
Parameters
Ra, Rz, Rt, Rp, Rmr, Rpc, Rsm, Rz1max, Rsk, Rda
Storage Capacity
100 measurement results
Dimensions
Overall dimensions
127 x 85 x 60mm / 5 x 3.35 x2.4"
Weight
450gm / 1lb
Nominal operating conditions
Temperature
5-40C / 41-104F
Humidity
0 to 80% non-condensing
Storage conditions
Temperature
0 to 50C / 32F to 122F
Humidity
0 to 80% non-condensing
Cat. No.
EDP
SR200
20951
SR-112-1510*
SR-112-1534*
SR-112-1517*
SR-112-2693*
SR-112-1502*
SR-112-1503*
SR-112-1504*
SR-112-1505*
SR-112-1506*
SR-112-3680*
SR-112-3681*
SR-K509-1578*
SR-K509-1820*
SR-112-3530*
SR-112-3532*
20961
20962
20963
20964
20956
20957
20958
20959
20960
20952
20953
20954
20955
20965
20967
Overview
Large screen display
Unique stylus lift mechanism for total flexibility
Many application specific parameter options
* Not Stocked
56
Description
SR200 display and traverse unit, TalyProfile Lite
software, pickup and diamond stylus, calibration
standard, manual and carrying case
200mm/7.875" Extension Rod with Lead
Reference Standard
Support Stand
Column and Stand
Standard Pickup with 5m/200" Stylus
Standard Pickup with 10m/400 Stylus
Small Bore Pickup
Right Angle Pickup
Recess Pickup
TalyProfile Gold - 2D Analysis Software w/cable
TalyProfile Silver - 2D Analysis Software w/cable
TalyProfile 2.5m/8' Cable
TalyProfile 1.5m/5' Cable
Power Adapter UK
Power Adapter 230 Volt EURO
Pickups
Standard Pickup
For general surface roughness measurement.
Cat. No. SR-112-1502; EDP 20956
Built-in Memory/Storage
The SR200 is truly portable with no PC or
printer cables in the way of measurements
take it to wherever you need to take
measurements, save up to 100 batch
readings and then download to your PC or
printer at your convenience.
Comprehensive Range of
Accessories & Pickups
Recess Pickup
For recesses to a depth of 5.7mm / 0.23"
Cat. No. SR-112-1506; EDP 20960
57
Outstanding Graphics
TalyProfile Lite provides clear on screen profile images.
Users can take basic measurements and create a full report
using the softwares detailed analysis options and publishing
capabilities.
In-Depth Analysis
Profiles can be levelled and zoomed to remove unwanted
features or defects from the analysis. Distance measurement
between features and areas of a profile, step height, area of
a hole and peak can all be easily displayed, graphically and
numerically.
Time-saving Templates
A sequence of analysis functions can be saved as a
template and applied to future measurements, turning
detailed reporting tasks into routine documents.
Presentation
TalyProfile Lite includes professional presentation capabilities.
Graphs, profiles and results can be arranged and printed
within TalyProfile and also has the flexibility for export to other
presentation software.
58
TalyProfile Features
Acquisition interface
Multiple file format reports
Graphical display
Desktop publishing templates
Document page viewer
Levelling
Symmetries
Zoom
Distance measurement
Profile curves
Area of a hole / peak
Abbott-Firestone Curve
Mini Documents
Save Profile (export data)
Basic & 2D file formats
Tolerance limits
Join Two Profiles
Resampling
Form removal
Retouch profile points
Filtering by FFT
Fractal analysis
R & W Motifs (ISO 12085)
Rk Calculation of Profiles
Graphical RK Parameters
Step height measurement
Frequency spectrum
Morphological Envelopes
Thresholding
Power spectrum density
Lite
x
x
x
x
x
x
x
x
x
x
x
x
Silver
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Gold
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Squares,
Precision Rules &
Parallels
59
435
Cast Iron Heads:
With reversible lock bolts, scriber, spirit
level in both square head and protractor
head, direct reading double 180 protractor
scale, hardened steel, photo-engraved
blade. Cast iron heads with black wrinkle
finish. Also available with satin chrome
blade and protractor head.
Combination Sets with Square, Centre and Reversible Protractor Head and Blade
Size
300mm
600mm
300mm & 11-3/40
600mm & 23-1/2"
60
Graduation
Blade
Combination Sets with Square, Centre and Reversible Protractor Head and Blade
Size
300mm
600mm
Graduation
Blade
Regular
61
Combination Sets with Square, Centre and Non-reversible Protractor Head and Blade
Size
300mm
600mm
300mm & 11-3/4"
600mm & 23-1/2"
62
Graduation
Blade
Regular
Regular
Combination Squares
with Square Head
Cast Iron Heads:
11H
With reversible lock bolt, scriber, spirit level
and hardened steel, photo-engraved blade
with regular or satin chrome finish. Cast iron
head with black wrinkle finish.
11MH-150
33MH-300
Size
300mm
600mm
Graduation
mm and 1/2mm Both Sides
11MH
Blade
Regular
Regular
33MH
Forged and Hardened Steel Heads
with Smooth Black Enamel Finish
Cat. No.
EDP
33MH-300
56249
33MH-600
56251
63
13 Double Squares
with hardened
blades
100-150mm
These squares are very popular
with machinists, toolmakers, and
patternmakers. The sliding blades are
adjustable making it practical for a wide
variety of uses. The faces of the head are
ground square, and the 150mm size has
a level.
The bevel blade is available, featuring
an octagon angle 45 at one end and a
hexagon angle 60 at the other end, clearly
marked.
Millimetre Reading Double Squares mm Both Edges One Side; mm and 1/2mm Reverse Side
Size
Description
Cat. No.
EDP
100mm
150mm
13MA
56278
13MB
56279
13MC
56280
13ME
56263
14 Double Steel
Squares with
hardened and
ground head and
blades
50mm
Designed for tool and diemakers, these
fine precision double steel squares have
adjustable blades, ideal for tight fits. A
knurled clamping nut accurately locks the
blades in any position.
Beveled blade is 45 on one end and 30
on the other.
58mm narrow blade has 32nds and 64ths
graduations. It is 4mm wide over a length
of approximately 41mm and cut away at
one end to a width of 2.4mm.
64
14 Double Steel Squares mm Both Edges One Side; mm and 1/2mm Reverse Side
Size
Graduation
Description
Cat. No.
50mm
mm, 1/2mm
EDP
14MA
56260
56261
3020 Toolmakers
Grade Stainless
Steel Squares
50-175mm / 2-31/32 - 12-1/32"
This high quality toolmakers square is
not graduated
Squareness accuracy to 0.005mm
(.0002") for every 150mm (6")
Hardened, ground and lapped
stainless steel construction on both
the blade and the beam
Beam is machined at the inner corner
for clearance of burrs or dirt
Packed one in a plastic case
300mm (12") square shipped in box
with fitted foam insert
3020 Toolmakers Grade Stainless Steel Squares
Size Length of Blade* Length of Beam Cat. No.
75mm/3"
50mm/2"
3020M-75
100mm/4"
75mm/3"
3020M-100
150mm/6"
100mm/4"
3020M-150
300mm/12"
175mm/7"
3020M-300
Complete Set of all 4 Squares
S3020MZ
EDP
12392
12393
12394
12395
12396
*Length of blade from the inner edge of the beam to the end of the blade.
60 Precision Steel
Squares
50-200mm / 2-8"
Hardened, ground and lapped
stainless steel blade
Accuracy: 0.005mm per 150mm
12335
12336
12337
12338
65
35
Reads both left-toright and rightto-left. A Starrett
original feature.
First Edge: mm
Second Edge: 1/2mm
Fourth Edge: mm
Third Edge: 1/2mm
NOTE:All rules under 25mm in width have single row of millimetre figures. Rules 25mm and wider have
double row of millimetre figures, and each edge represents the bottom edge reading left to right.
66
Rules include:
Full-Flexible
Spring-Tempered
Full-Flexible Steel Rules with Millimetre Graduations
Length
Width x Thickness
Graduations
150mm
12.7 x 0.4mm
30 1/2mm One Side; mm and 1/2mm on Reverse
300mm
12.7 x 0.4mm
30 1/2mm One Side; mm and 1/2mm on Reverse
Spring-Tempered Steel Rules with Millimetre Graduations
150mm
19 x 1.2mm
35 mm and 1/2mm Both Sides
300mm
25.4 x 1.2mm
35 mm and 1/2mm Both Sides
500mm
29 x 1.2mm
35 mm and 1/2mm Both Sides
1000mm
32 x 1.2mm
35 mm and 1/2mm Both Sides
Cat. No.
*C330-150
*C330-300
EDP
51329
51330
C635-150
C635-300
C635-500
C635-1000
52630
52631
52632
52633
* Indicates rules with single row of millimetre figures (all rules under 25mm width). Rules without asterisk have double row of millimetre figures, and each edge represents the bottom edge
reading left to right (rules 25mm and wider).
Rules include:
Spring-Tempered
Cat. No.
C636ME-150
C636-300
C636-500
C636-1000
EDP
52634
52635
52636
52637
67
68
Range
9.5-12.7mm (3/8 - 1/2")
12.7-17.5mm (1/2 - 11/16")
17.5-24mm (11/16 - 15/16")
24-33mm (15/16 - 1-5/16")
33-44mm (1-5/16 - 1-3/4")
44-57mm (1-3/4 - 2-1/4")
Cat. No.
154A
154B
154C
154D
154E
154F
S154SZ
EDP
50578
50579
50580
50581
50582
50583
50584
S154LZ
50586
EDP
51453
63676
63677
63678
Fixed Gauges
69
Gauge Features
Made of satin finish stainless steel rust and stain resistant
Each gauge is clearly marked with its radius
Each gauge has five different gauging surfaces for both
convex and concave radii
All gauges have precision finished radii with extra smooth,
accurate edges
Five Different Gauging Surfaces Ideal for Checking Convex and Concave Radii of All Types
1
Gauges
Description
Cat. No.
EDP
0.5-7mm; 8-15mm
22
S167MCHZ
55821
70
0.5mm; 1mm
Length
64mm
70mm
Increments
0.25mm
0.5mm
Leaves
10
13
Leaves
18
16
Cat. No.
269MA
269MB
EDP
56031
56032
Cat. No.
270
EDP
51292
Cat. No.
272MA
272MB
EDP
51297
51299
71
Thickness Gauges
0.03-5mm
These gauges are used in automotive,
aviation, diesel and farm equipment
manufacture and service and also in jig,
fixture, gauge and experimental work.
Especially useful in adjusting tappets,
spark plugs, distributor points, checking
bearing clearances and gear play, fitting
pistons, rings and pins and gauging narrow
slots. Made in a wide range of types and
sizes, each having from 6 up to 26 leaves
ranging in thickness from 0.03-5mm,
straight or tapered.
66MA
173MCT
EDP
No. of Leaves
Size Leaves
66MA
55974
20
12.7 x 77mm
467M
52465
12.7 x 114mm
Millimetre Reading Thickness Gauges with Tapered Leaves
173MAT
57087
12.7-7 x 77mm
13
173MCT
57088
12.7-7 x 152mm
72
(Range)
Leaf Thickness (mm)
0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80,
0.85, 0.90, 0.95, 1.0
0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15, 0.20, 0.30, 1.0, 2.0, 3.0, 5.0
0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50
159M
No. of Leaves
TPI Range
156M
50589
28
0.25-2.50mm
159M
50591
28
0.5-11.5mm
156M
73
74
EDP
52823
52824
52825
52826
52827
52828
52829
52830
52831
52832
52833
52834
52835
52836
EDP
52869
52870
52871
52872
52873
52874
52875
52876
52877
52878
52879
52880
52881
52882
75
98 Machinists
Levels with ground
and graduated vials
100-450mm
These levels have ground and graduated
main vials. All sizes have a cross test vial
except the 100mm model.
The 300mm model also has a plumb vial and
the 450mm size has a double plumb vial.
76
Cat. No.
98-4
98-6
98-8
98-12
98-18
EDP
50440
50441
50442
50443
50445
Description
With Main Vial
Cat. No.
130
EDP
50560
3097Z Precision
Level
Main vials have seven graduations
on each side of the bubble with
10-second accuracy
Auxiliary level vial shows lateral
position and assists in horizontal
setting
One division on the vial represents
0.02mm/m
Special alloy iron used to obtain
freedom from thermal effects
Includes attractive aluminum case
Cat No.
3097Z
EDP
12312
Size
200mm/8"
77
How To Use:
Edge finders are easy to use. They are
placed in a collet or chuck. The worktable
is then traversed to obtain contact between
the rotating edge finder and the work.
Contact will shift to concentric position
relative to the body and with very slight
additional table adjustment, will move off
centre with a decided wobble. At this point,
the centre of the finder is exactly one-half
the diameter of the contact from the work
edge, permitting accurate location for other
machining operations relative to the edge.
78
Contact Diameter
6mm
6mm and pointed contact
Cat. No.
827MA
827MB
EDP
56041
66452
73, 79, 83 Yankee Spring274, 275 Toolmakers SpringType Calipers and Dividers
Type Calipers with round legs
with flat legs and quick-spring and solid nut
75, 150mm
nut
100, 150, 200, 300mm
Starrett Yankee Calipers and Dividers are made from a highgrade steel and well-finished. The legs are made of flat stock and
are very durable. The fulcrum stud is hardened and has a smooth
bearing surface. The bow spring, although flexible, is exceedingly
strong to assure reliability.
The Starrett quick-adjusting automatic-closing spring nut is
designed for making fast, positive adjustments. The threads of
the nut firmly engauge the screw at the slightest pressure from
the leg. When the pressure is withdrawn, the nut automatically
releases itself, sliding freely over the screw. This feature saves
time in opening and closing.
EDP
50335
50337
50339
50343
50365
50367
50369
50373
50377
50379
50381
50385
51301
51303
51305
51307
79
26 (Outside)
0-4.8mm
Starrett pin vises are useful for securely holding small stock, taps,
drills, reamers, scribers, wire, small files, and other tools. The jaws
are hardened and with a few turns of the binding nut, a firm grip
may be obtained. Handles and binding nuts are nickel-plated.
150-900mm
27 (Inside)
150-600mm
Improved joint designed for tension adjustment
Tension will not change with leg movement
Legs are made from a high-grade steel, are ruggedly
constructed and well-finished
26 Outside Calipers
Size*
150mm
300mm
450mm
600mm
900mm
27 Inside Calipers
150mm
300mm
450mm
600mm
Cat. No.
26-6
26-12
26-18
26-24
26-36
EDP
50186
50189
50190
50191
50192
27-6
27-12
27-18
27-24
50193
50196
50197
50198
80
A hole extends through the full length of the handles so that wires
of any length and any diameter up to the full size of the tool can
be held.
The handles of these pin vises are reduced in size so that they
can be rapidly rotated between thumb and finger when filing small
work.
Cat. No.
162A
162B
162C
162D
S162Z
EDP
50599
50600
50601
50602
50604
70 Pocket Scribers
The handle is of steel, knurled, and nickel plated. The scriber point
is steel, properly hardened or carbide and finely tapered so that
the location of the point is not obscured.
The scriber is held firmly in the handle by a knurled chuck and
when not in use can be reversed, telescoped into the handle, and
locked by the chuck. The hexagon-shaped head prevents rolling.
70 Pocket Scribers
Point
Point Length
60mm
Steel
72mm
60mm
Carbide
72mm
Handle Diameter
6.4mm
9.5mm
6.4mm
9.5mm
Cat. No.
70A
70B
70AX
70BX
EDP
50323
50324
50327
56092
Body
Length
50
65
90
150
250
330
Cat. No.
93A
93B
93C
93D
93E
93F
EDP
50427
50428
50429
50430
50431
50432
81
18
818
819 Hinge-Locating
82
Length
100mm
125mm
130mm
Diameter
11mm
14mm
17mm
Cat. No.
18AA
18A
18C
EDP
50119
50120
56757
EDP
53048
53049
Cat. No.
248A
248B
248C
248D
248E
S248PC
EDP
51181
51182
51183
51184
51185
51186
Cat. No.
117AA
117A
117B
117C
117D
117E
S117PC
EDP
50482
50483
50484
50485
50486
50487
50488
83
84
Cat. No.
565A
565B
565C
565D
565E
565F
565G
565H
S565WB
S565PC
EDP
52578
52579
52580
52581
52582
52583
52584
52585
52586
52587
Cat. No.
B565A
B565B
B565C
B565D
B565E
B565F
B565G
B565H
SB565Z
EDP
12465
12466
12467
12468
12469
12470
12471
12472
12473
Cat. No.
816A
816B
816D
EDP
53043
53044
53046
S816PC
57078
Cat. No.
800A
800B
800C
800D
800E
EDP
53029
53030
53031
53032
53033
S800PC
64131
85
45
88
112
Cat. No.
EDP
RS 9.MA1*
93356
RS 45.MA1*
93059
RS 88.MA1*
92872
RS 112.MA1*
93060
RS 10.MA*
99753
RY 45.MAA*
97634
RY 88.MAA*
97081
45
88
Sets include etched serial numbers and Commercial Calibration Certificate. Metric croblox Wear Blocks and/or Master Calibration Certificate are available at extra cost.
* Not Stocked
Thru 0.5mm
Thru 10mm
Thru 25mm
Thru 50mm
Thru 75mm
Thru 100mm
Thru 125mm
Thru 150mm
Thru 175mm
Thru 200mm
Thru 250mm
Thru 300mm
Thru 400mm
Thru 500mm
86
Flatness Tolerance
.10
.10
.10
.10
.10
.10
.10
.10
.15
.15
.15
.15
.15
.15
Cat No.
3047-0
EDP
20804
No. of Blocks
47 Grade "0"
3047-1
20805
47 Grade "1"
3088-0
20806
88 Grade "0"
3088-1
20807
88 Grade "1"
Description
1.005, 1.01 to 1.19 by 0.01mm step,
1.2 to 1.9 by 0.1mm step, 1-10 by 1mm
step,20-100 by 10mm step
1.0005, 1.001 to1.009 by 0.001mm step,
1.01 to 1.49 by 0.01mm step, 0.5 to 9.5
by 0.5mm step, 10-100 by 10mm step
EDP
57075
87
86
46
Bore Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
C
Calibration, Accuracy/General Service Information. . . . . . . . v
Calipers
Leg Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Slide Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Electronic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Vernier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Combination Squares. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
D
Depth Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Dividers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Durometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
E
Edge Finders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
G
Gauge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gauges
Crankshaft Distortion Dial/Strain . . . . . . . . . . . . . . . . . . . . . .
Dial
Groove. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Universal Back-Plunger. . . . . . . . . . . . . . . . . . . . . . . . . . .
"Feeler" Stock/Thickness. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fillet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fixed Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radius. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screw Pitch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
44
41
72
70
69
34
70
73
71
72
H
Height Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
I
Indicators
Bases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spindle Squares. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electronic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
40
44
48
38
42
L
Levels
Precision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
M
88
Parallels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pin Vises. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precision Shop Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
80
75
82
R
Rules
Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
S
Saw Tension Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scribers
Pocket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Squares
Double. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Toolmakers' Stainless Steel. . . . . . . . . . . . . . . . . . . . . . . . . .
87
81
64
65
65
T
Tap Wrenches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testers
Hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Surface & Hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Surface Roughness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
81
50
49
55
54
9
11H
13
14
18
26
27
33H
60
63
66
70
73
79
83
93
98
SR100
117
124
125
130
154
156
159
162
167
173
196
SR200
207
208
220
222
224
234
248
256
263
269
270
272
274
275
C330
384
434
435
436
440
444
445
449
460
463
467
483
486
565
B565
576
577
Combination Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Combination Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Double Squares with hardened blades. . . . . . . . . . . . . . . 64
Double Steel Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Automatic Centre Punches . . . . . . . . . . . . . . . . . . . . . . . 82
Firm-Joint Calipers, Outside. . . . . . . . . . . . . . . . . . . . . . 80
Firm-Joint Calipers, Inside. . . . . . . . . . . . . . . . . . . . . . . . 80
Combination Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Precision Steel Squares. . . . . . . . . . . . . . . . . . . . . . . . . . 65
Long Range Micrometer Heads . . . . . . . . . . . . . . . . . . . . 13
Thickness Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Pocket Scribers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
"Yankee" Inside Calipers. . . . . . . . . . . . . . . . . . . . . . . . . 79
"Yankee" Outside Calipers. . . . . . . . . . . . . . . . . . . . . . . . 79
"Yankee" Dividers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
T-Handle Tap Wrenches. . . . . . . . . . . . . . . . . . . . . . . . . . 81
Machinists Levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Surface Roughness Tester. . . . . . . . . . . . . . . . . . . . . . . . 55
Centre Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Inside Micrometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Vernier Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Bench Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Adjustable Parallels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Screw Pitch Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Screw Pitch Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Pin Vises. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Radius/Fillet Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Thickness Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Universal Back-Plunger Dial Indicators . . . . . . . . . . . . . . 41
Surface Roughness Tester. . . . . . . . . . . . . . . . . . . . . . . . 56
Can Seam Outside Micrometers. . . . . . . . . . . . . . . . . . . . 9
Can Seam Outside Micrometers. . . . . . . . . . . . . . . . . . . . 9
Mul-T-Anvil Micrometer. . . . . . . . . . . . . . . . . . . . . . . . . . 10
Sheet Metal Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . 11
Interchangeable Anvil Micrometers . . . . . . . . . . . . . . . . . . 6
End Measuring Rods. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Drive Pin Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Disc-Type Outside Micrometers. . . . . . . . . . . . . . . . . . . . . 7
Micrometer Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Taper Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Taper Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Fillet or Radius Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Toolmakers Inside Calipers. . . . . . . . . . . . . . . . . . . . . . . 79
Toolmakers Outside Calipers. . . . . . . . . . . . . . . . . . . . . 79
Steel Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Steel Parallels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Combination Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Combination Squares . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Outside Micrometers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Depth Micrometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Micrometers with Insulated Frames. . . . . . . . . . . . . . . . . . 5
Depth Micrometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Micrometer Depth Gauges. . . . . . . . . . . . . . . . . . . . . . . . 15
Micrometer Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Micrometer Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Thickness Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
V-Anvil Outside Micrometers. . . . . . . . . . . . . . . . . . . . . . . 8
Blade Type Outside Micrometers. . . . . . . . . . . . . . . . . . . . 8
Drive Pin Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Brass Drive Pin Punches . . . . . . . . . . . . . . . . . . . . . . . . . 84
Rounded Anvil Outside Micrometers . . . . . . . . . . . . . . . . . 9
Rounded Anvil OUtside Micrometers . . . . . . . . . . . . . . . . . 9
579
Telescoping Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
C635
Steel Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
649
Spindle Square. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
653
Dial Gauge Stands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
660
Magnetic Base Indicator Holder. . . . . . . . . . . . . . . . . . . . 42
661
Mini Magnetic Indicator Holder . . . . . . . . . . . . . . . . . . . . 43
666
Thickness Gauges/Feeler Stock. . . . . . . . . . . . . . . . . . 74
667
Thickness Gauges/Feeler Stock. . . . . . . . . . . . . . . . . . 74
682EMZ
Saw Tension Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
696
Crankshaft Distortion Dial/Strain Gauge. . . . . . . . . . . . . . 46
733
Electronic Micrometers (w/ output) . . . . . . . . . . . . . . . . . . 3
749
Electronic Micrometer Depth Gauge. . . . . . . . . . . . . . . . . 16
762
Micrometer Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
795
Electronic Micrometers (w/ output) . . . . . . . . . . . . . . . . . . 2
796
Electronic Micrometers. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
798
Electronic Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
799
Electronic Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
800
Square-Head Nail Sets . . . . . . . . . . . . . . . . . . . . . . . . . . 85
816
Prick Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
818
Automatic Centre Punches . . . . . . . . . . . . . . . . . . . . . . . 82
819
Automatic Centre Punches . . . . . . . . . . . . . . . . . . . . . . . 82
823
Tubular Inside Micrometer Sets. . . . . . . . . . . . . . . . . . . . 18
827
Edge Finders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
829
Small Hole Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
831
Small Hole Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1015
Portable Dial Thickness Gauges. . . . . . . . . . . . . . . . . . . . 44
1175
Dial Indicator Groove Gauges. . . . . . . . . . . . . . . . . . . . . . 45
1202
Dial Calipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2000
Altissimo Electronic Height Gauges . . . . . . . . . . . . . . . 30
2900
Electronic Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3015
Portable Dial Thickness Gauge. . . . . . . . . . . . . . . . . . . . . 44
3020
Toolmakers Grade Stainless Steel Squares. . . . . . . . . . . 65
3025
Dial Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3047.0
Precision Gauge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . 87
3047.1
Precision Gauge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . 87
3081
Dial Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3088.0
Precision Gauge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . 87
3088.1
Precision Gauge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . 87
3089
Dial Bore Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3097Z
Precision Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
3206
Outside Micrometer Stand. . . . . . . . . . . . . . . . . . . . . . . . . 5
3259
Dial & Digital Height Gauges . . . . . . . . . . . . . . . . . . . . . . 32
3600
Electronic Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3657
Magnetic Indicator Holders . . . . . . . . . . . . . . . . . . . . . . . 43
3732
Electronic Micrometers. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3751
Electronic Height Gauge . . . . . . . . . . . . . . . . . . . . . . . . . 27
3752
Electronic Height Gauges. . . . . . . . . . . . . . . . . . . . . . . . . 28
3753
Electronic Depth Gauges. . . . . . . . . . . . . . . . . . . . . . . . . 26
3805A
Electronic Durometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3808
Dial Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3809
Dial Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3811A
Compact Hardness Tester . . . . . . . . . . . . . . . . . . . . . . . . 52
3812
Ultrasonic Thickness Tester. . . . . . . . . . . . . . . . . . . . . . . 54
3814
Analog Bench Hardness Tester. . . . . . . . . . . . . . . . . . . . 50
3815
Twin Analog Bench Hardness Tester. . . . . . . . . . . . . . . . . 51
RS 9.MA1 Rectangular Steel Gauge Block Set. . . . . . . . . . . . . . . . . 86
RS 10.MA Micrometer Checking Set . . . . . . . . . . . . . . . . . . . . . . . . 86
RS 45.MA1 Rectangular Steel Gauge Block Set. . . . . . . . . . . . . . . . . 86
RS 88.MA1 Rectangular Steel Gauge Block Set. . . . . . . . . . . . . . . . . 86
RS 112.MA1 Rectangular Steel Gauge Block Set. . . . . . . . . . . . . . . . . 86
RY 45.MAA Rectangular Ceramic Gauge Block Set. . . . . . . . . . . . . . . 86
RY 88.MAA Rectangular Ceramic Gauge Block Set. . . . . . . . . . . . . . . 86
89
Bore Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Calipers & Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Depth Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Fixed Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Gauge Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Height Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Hole Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Indicators & Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Indicators, Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Indicators, Electronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Indicators, Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Indicators, Special Function . . . . . . . . . . . . . . . . . . . . . . . 44
Levels, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Micrometers, Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Micrometers, Electronic Outside . . . . . . . . . . . . . . . . . . . . 2
Micrometers, End Measuring Rods . . . . . . . . . . . . . . . . . 12
Micrometers, Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Micrometers, Inside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Micrometers, Mechanical Outside . . . . . . . . . . . . . . . . . . . 4
Micrometers, Special Function Outside . . . . . . . . . . . . . . . 7
Parallels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Precision Shop Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Precision Gauge Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Rules, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Slide Calipers, Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Slide Calipers, Electronic . . . . . . . . . . . . . . . . . . . . . . . . . 20
Slide Calipers, Vernier . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Squares, Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Squares, Double . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Squares, Solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Testers, Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Testers, Surface Roughness . . . . . . . . . . . . . . . . . . . . . . . 55
Testers, Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
90
How to Order
For prompt delivery, technical support and assistance, contact your
nearest industrial distributor.
Product Demonstration
All Starrett manufacturing and branch locations and many distributors
can demonstrate an array of Starrett products at work. Contact your local
distributor to learn more.
www.starrett.co.uk
11/11