Scribd
Upload
15K views4 pages

AUDI VCDS Coding (English)

The document provides instructions for customizing various vehicle settings and features through coding adjustments, including: 1. Removing seatbelt chimes, enabling gauge tests and lap timers, and operating windows/sunroof with remote by adjusting bits in the central convenience module. 2. Accessing hidden MMI menus and fixing LED shutoff settings by changing bits in various control modules. 3. Customizing settings like fog light behavior, wiper functions, headlight wash duration, and more through security access and adaptation channels. 4. Configuring display readings for automatic transmission gear selection, fuel consumption, efficiency programs, and other instruments through adaptation channels.

Uploaded by

Aymz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
15K views4 pages

AUDI VCDS Coding (English)

The document provides instructions for customizing various vehicle settings and features through coding adjustments, including: 1. Removing seatbelt chimes, enabling gauge tests and lap timers, and operating windows/sunroof with remote by adjusting bits in the central convenience module. 2. Accessing hidden MMI menus and fixing LED shutoff settings by changing bits in various control modules. 3. Customizing settings like fog light behavior, wiper functions, headlight wash duration, and more through security access and adaptation channels. 4. Configuring display readings for automatic transmission gear selection, fuel consumption, efficiency programs, and other instruments through adaptation channels.

Uploaded by

Aymz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

AUDI VCDS Coding (english) :

Removing Seatbelt Chime:


[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 0
Bit 2-4 - Seat Belt Warning inactive
Enabling Gauge Test/Needle Sweep:
This will sweep the gauge needles through their full range automatically when yo
u start the engine.
[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 1
Bit 0 - Check the box for "Gauge Test/Needle Sweep active"
Enabling Lap Timer (on MY2010+ the oil temperature showing will be enabled as we
ll):
[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 1
Bit 3 - Check the box for "Lap Timer active"
Operating Windows and Sunroof with Remote*:
*Note, the sunroof can only be opened (tilted) with the remote, when activated i
n MMI (CAR>WINDOW>CONVENIENCE>SUNROOF>ON)
You need to continuously hold the remote button for the function to operate.
[Select]
[46 - Cent. Conv.]
[Coding - 07]
[Long Coding Helper]
Click on each of the Byte numbers in line 3 and you'll see the selectable option
s :below.
Check the box for "Comfort Operation: Remote Control active"
[Transfer Coding]
[Do It!]
Hidden menu in MMI high (2G): (Only for Navigation equipped cars)
[07 - Control Head]
[Adaptation - 10] -> Channel 8
change 0 to 1
Use this hidden menu at your own risk.
Caution: Keep away from the "Bootloader"
Hidden menu in MMI Navi Plus (3G): (Only for Navigation equipped cars)
[5F - Information Electr.]
[Adaptation - 10] -> Channel 6
change 0 to 1
Use this hidden menu at your own risk.
Caution: Keep away from the "Bootloader"
Fixing LED shut off when turn sign is on while DRL are active only:
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 3
Bit 2 - LEDs remain at full brightness with parking lights (1 = active)
Bit 7 - Turn off LED-strip DRLs with indicators (1 = active)
Turn off amber side markers (US models Only):
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 10
Submodule 0
Bit 3 - Set to 0 to disable amber side markers (U.S. vehicles)

Front Fog Lights stay on with High-beams:


[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4
Bit 1 - Uncheck the box or change :Bit 1 to 0
Rear Fog Lights stay on with High-beams:
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4
Bit 2 - Uncheck the box or change :Bit 2 to 0
Headlights on all the time:
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4
Bit 5 - Check the box or change :Bit 5 to 1
Fog Light turns on with turn turn signal when Headlights active:
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4
Bit 0- Check the box or change :Bit 0 to 1
Front Turn Signals as Parking lights:
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 10
Bit 0- Check the box or change :Bit 0 to 1
Once the change has been made you can enable the front turn signals as DRL's by
making the following change:
[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 2
Bit 6- Check the box or change :Bit 0 to 1
After-wipe of windscreen wipers when windscreen washer has been used:
[09 - Cent. Elect.]
[Coding - 07] -> Dropdown -> "x -- 8K1 955 119 -- WWS xxxx" -> Long Coding Helpe
r -> Byte 1
Bit 3 - Remove check mark (1 = active)
Headlight washer - duration of wash:
[09 - Cent. Elect.]
[Security Access - 16]
[Adaptation - 10] -> Channel 6
change to e.g. 500
Disable automatic rear window wipe on the Avant, when windscreen wipers are acti
ve and the car is reversing:
[09 - Cent. Elect.]
[Security Access - 16]
[Adaptation - 10] -> Channel 19
change 1 to 0
Headlight washer - times of wash and wipe cycles between each automatic activati
on:
[09 - Cent. Elect.]
[Security Access - 16]
[Adaptation - 10] -> Channel 26
change to e.g. 10
Audi parking system - Switch OFF Speed:
[10 - Park/Steer Assist]
[Adaptation - 10] -> Channel 23
change to 20 (max value in km/h)

Automatic Gear selection shown in


[02- Auto Trans]
[Adaptation - 10]
Select Single Gear Display from
Select D on/S on from New value
Select Do It!
Note: May have to select Do It!

DIS:
top channel drop down menu
drop down menu
a few times to save the change

Consumption in DIS:
[17 - Instruments]
[Adaptation - 10] -> Channel 3
change 100 to xxx (see samples below)
Sample 1 - Calculation based on volume per distance (e.g. l/100km):
DIS: 9,3 l/100 km.
Real: 9,8 l/100 km. (100 * 9,8 / 9,3 = 105,38)
Channel 3 will be changed from 100 to 105
Sample 2 - Calculation based on distance per volume (e.g. MPG):
DIS: 23 MPG.
Real: 24 MPG. (100 * 23 / 24 = 95,83)
Channel 3 will be changed from 100 to 96
DIS with Efficiency Program for MY2010+ (Not a complete Program without the Star
t/Stop System):
[17 - Instruments]
[Adaptation - 10] -> Channel 77
change 0 to 255
DVD navigation eject lock:
[37 - Navigation]
[Adaptation - 10] -> Channel 68
0 = button active
1 = button inactive (anti-theft)
http://wiki.ross-tech.com/index.php/Audi_A4_(8K)_Navigation
Emergency Brake Flashing Lights:
[46 - Comfort System]
[Coding - 07] -> Long Coding Helper -> Byte 8
Bit 0 - Emergency Brake Flashing via Turn Lights active (1 = active)
Bit 1 - Emergency Brake Flashing via Brake Lights active (1 = active)
Phone voice control: (NOT available for MY2010)
[77 - Telephone]
[Coding - 07]
00x0x?0 - The 2nd to last digit should be changed to e.g. 2 (English (UK))
Coding
00?0xx0: MMI System
1 = MMI/Sound System High
2 = MMI/Sound System Standard
00x0?x0: Installation List
9 = Vehicle with MOST-Databus
00x0x?0: Voice Control Language
0 = Voice Control OFF
1 = German (Rest of World)
2 = English (United Kingdom)
3 = French (Rest of World)
4 = Italian (Rest of World)
5 = Spanish (Rest of World)
6 = Spanish (USA)
7 = English (USA)

8 = French (Canada)
9 = Speaker depend Voice Selection

You might also like