ETH-Leaflet US 1002

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

ETH Series

for universal use

Milling Cutters

Eickhoff Milling Cutters of the ETH series


The hydraulic milling cutters of the ETH series can be mounted to an
excavator in lieu of the bucket. The milling cutter is of simple and compact
design and maintenance-free with the exception of oil changes.
Hydraulic excavators of any type having the corresponding service weight and
diesel power are suited for this purpose.
The milling cutter mainly consists of an Eickhoff gearbox and a pair of
transverse cutting heads which are fitted with round shank picks. It is driven by
a hydraulic motor which is fed with pressure oil from the excavator hydraulics.

An adapter is required for attachment to the different excavator types and can be
supplied upon request. Should the customer provide the adapter, Eickhoff would
supply the attachment dimensions.
The position of the milling cutter which is mounted to the adapter, turned
through 90, even allows cutting of narrow trenches down to a width of 27 .
For operating the hydraulic milling cutter with an excavator, the control of the
hydraulic motor for the milling cutter will have to be installed at the operators
panel. The operation of the excavator movement is maintained in any case.

ETH 50 mounted to an O&K RH 20 excavator

Special features of the ETH series

FEATURES

BENEFITS

Eickhoff
a manufacturer of
boom-type roadheaders

Transfer of the
cutting experience
to the ETH series

Gearbox
design and manufacture
by Eickhoff

Robust integral component


of the ETH series

Thick-walled
robust cutting drums
with reinforcing web

Safe resistance
to high cutting forces

Positive connection
of drum and gearbox
by means of a square flange

Safe transmission
of high torques

Turning of the milling cutter


through 90

Cutting of narrow trenches


down to a width of 27

Optimum pick arrangement


based on the experience gained
with boom-type roadheaders

High cutting rate


at a compressive strength
of the rock of up to 14,500 psi

Use of
commercially available
standard pick types

Minimization of the cost


of wear parts

Wear protection
at the gear housing

Protection of units
which are not involved in cutting

Examples for possible applications


The hydraulic milling cutter is suited for cutting natural rocks, concrete, asphalt,
industrial minerals, masonry and similar materials for:
Tunneling and mining
Heading, profiling
Restoration, ripping
Mineral extraction
Civil engineering
Trench milling down to a width of 27
Foundation milling
Cellar excavation
Road construction
Asphalt cutting
Demolition
Well-controlled and pinpointed demolition
Partial demolition while safeguarding the
remaining part of the building
Hydraulic engineering
Lowering of navigable water ways
Milling of trenches for pile planking
Milling of culverts in river beds
Low noise operation
In all places where other excavating equipment
( e.g. hydraulic hammers ) is too noisy

Specification:

ETH 30

ETH 50

ETH 200

lb

45,000

65,000

130,000

hp

135

200

360

4,350 psi / 53 gpm

4,350 psi / 80 gpm

4,350 psi / 143 gpm

psi

4,350

4,350

4,350

Oil flow rate **

gpm

53 - 66

80 - 120

143 -198

Revs. of the cutting head

rpm

75 - 95

60 - 90

52 - 72

Pick tip speed

fpm

510 - 650

450 - 675

590 - 820

ft lb

9,600

16,960

36,875

lb

9,000

13,500

20,000

lb

3,800

6,100

16,800

quantity

60

76

152

Dimension A:
Cutting head diameter
over pick tips

inch

26 3/8

29 1/2

43 3/8

Dimension B:
Cutting head width
over pick tips

inch

48

59

78

Excavator class

(min.)

Power of the ETH


Operating pressure * (max.)

Output torque
Cutting force
Weight

(max.)
(max.)

(approx.)

Picks

* The output torque and the cutting force is lower at a lower operating pressure
** The revs./min. and the cutter speed are lower at a lower oil flow rate

Cutting Capacity:
Rock type and excavator
determine the cutting
capacity of the hydraulic
milling cutters to a great
extent.

Cutting Range:
Example of an ETH 200
mounted to a CAT 375 ME
excavator. Other excavators
offer different cutting ranges.

Examples of combinations
excavator type
Atlas

Case Poclain
Case USA

Caterpillar

Daewoo

Furukawa

Fiat-Hitachi

Hitachi

Hyundai

JCB

John Deere

1704
1804
2004
1288
1488
9040
9050
9060
320 C
322 C
325 C
330 C
345 B-II
350
365 B
375
385 B
Solar 220
Solar 280
Solar 330
Solar 400
Solar 450
640 LS
645 LS
650 E
FH 220.3
FH 240.3
FH 270.3
FH 300.2
FH 330.3
FH 400.2
FH 450.3
EX 220
EX 300
EX 400
EX 550
EX 600
EX 700
EX 750
EX 800
EX 1100
290 LC-3
320 LC-3
360 LC-3
450 LC-3
JS 240 LC
JS 260 LC
JS 300 LC
JS 450 LC
230 LC
270 LC
330 LC
370

weight
[lp]
53,000
69,000
80,000
62,000
80,000
53,000
69,000
97,000
49,000
55,000
60,000
75,000
108,000
108,000
146,000
177,000
185,000
47,000
62,000
71,000
84,000
97,000
49,000
60,000
80,000
55,000
58,000
60,000
69,000
73,000
97,000
102,000
51,000
62,000
91,000
119,000
124,000
148,000
161,000
166,000
232,000
64,000
69,000
80,000
97,000
53,000
58,000
71,000
100,000
51,000
51,000
73,000
73,000

motor power
[ KW
125
152
178
127
148
125
166
205
103
121
128
181
239
213
287
319
382
108
143
184
191
221
115
141
150
114
114
122
147
162
209
220
114
154
206
272
272
309
324
324
412
136
162
184
213
114
114
151
213
127
134
175
175

(HP) ]
(167)
(203)
(238)
(170)
(198)
(167)
(222)
(274)
(138)
(162)
(171)
(242)
(320)
(285)
(384)
(427)
(512)
(144)
(191)
(246)
(256)
(296)
(154)
(189)
(201)
(152)
(152)
(163)
(197)
(217)
(280)
(295)
(152)
(206)
(276)
(364)
(364)
(414)
(434)
(434)
(552)
(182)
(217)
(246)
(285)
(152)
(152)
(202)
(285)
(170)
(179)
(234)
(234)

ETH 30
X
X
X
X
X
X
X

ETH 50

ETH 200

X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X
X
X
X
X
X
X
X

X
X
X

X
X
X

X
X
X

X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

X
X
X

X
X

X
X

excavator type
Kobelco

Komatsu

Liebherr

O&K

Samsung

SK 210
SK 250
SK 330
SK 460
PC 200-6
PC 210-7
PC 220-5
PC 240-7
PC 290-7
PC 300-5
PC 340-7
PC 360-5
PC 380-6
PC 400-5
PC 450-6
PC 600-6
PC 650-5
PC 750-6
PC 1000-1
PC 1100-6
912 Lit
912 Lit Tunnel
914 Lit
922 Lit
924 Lit
932 Lit
932 Lit Tunnel
934 Lit
942 Lit
944 Lit
954 B Lit
964 B Lit
974 B Lit
984 C Lit
RH 6-20
RH 6-22
RH 6.5
RH 8.5
RH 9.5
RH 12.5
RH 16.5
RH 20
RH 23.5
RH 25.5
RH 30 F
RH 40 E
SE 240 LC-3
SE 280 LC-3
SE 350 LC-2
SE 450 LC-2

weight
[lb]
45,000
55,000
69,000
95,000
45,000
47,000
49,000
53,000
62,000
71,000
73,000
82,000
91,000
100,000
100,000
133,000
150,000
172,000
212,000
227,000
45,000
58,000
47,000
53,000
55,000
60,000
75,000
62,000
71,000
75,000
105,000
133,000
172,000
243,000
45,000
49,000
47,000
55,000
64,000
75,000
89,000
104,000
106,000
130,000
190,000
220,000
51,000
62,000
78,000
97,000

motor power
[ KW
103
121
169
213
100
107
114
125
134
154
180
162
173
206
228
286
302
331
405
456
100
100
105
112
112
132
132
137
164
164
210
270
360
504
126
131
113
131
145
186
186
228
235
298
340
365
132
132
184
221

(HP) ]
(138)
(162)
(226)
(285)
(134)
(143)
(152)
(167)
(179)
(206)
(241)
(217)
(231)
(276)
(305)
(383)
(404)
(443)
(543)
(611)
(134)
(134)
(140)
(150)
(150)
(177)
(177)
(183)
(219)
(219)
(281)
(362)
(482)
(675)
(168)
(175)
(151)
(175)
(194)
(249)
(249)
(305)
(315)
(399)
(455)
(489)
(177)
(177)
(246)
(296)

ETH 30
X
X
X
X
X
X
X
X
X
X
X
X

X
X
X
X
X
X
X
X
X
X

ETH 50

ETH 200

X
X

X
X
X
X
X
X
X

X
X
X
X

X
X
X
X
X
X

X
X
X
X
X
X
X
X

X
X
X
X
X
X
X

X
X
X

X
X

Tunneling

ETH 50
mounted to a CAT 245 excavator, for true to profile milling of overdimensions from
shotcrete in the Engelberg tunnel near Stuttgart, Germany.

ETH 50
mounted to a CAT 350 excavator, for profiling the side walls down to the mounting
position of the concrete segments and for profiling the tunnel roof section in hard shale
and limestone for a project of the University of Minneapolis, U.S.A.

ETH 50
mounted to a Broyt X600D front shovel excavator, for true to profile milling of overdimensions from shotcrete in the Rennsteigtunnel of the Thuringian Forest in Germany

ETH 30
mounted to a LIEBHERR 932 excavator tunnel-type, for milling thin-bedded marl and
shale for driving the Sieberg tunnel near St.Valentin, Austria (high-speed railway
Vienna-Salzburg).

Trenching

ETH 30
mounted to an Liebherr R 934
excavator, turned through 90,
for milling a 27 wide trench
from layers of asphalt, concrete
and hard compact sandstone.

ETH 50
mounted to a HITACHI EX 400 excavator, turned through 90, for milling a 32 wide
trench in Swiss Jura (hard limestone) in Switzerland.

Trenching

ETH 30
mounted to an ATLAS 1804
excavator, for milling a 6 ft
wide trench from hard
compact sandstone.

ETH 30
mounted to an O&K RH 9
excavator, for milling a 7 ft
wide trench from layers of
asphalt, concrete and hard
compact sandstone

Demolition

ETH 30
mounted to a Komatsu
PC 240 excavator, for
low-vibration demolition
of bridge piles without
destroying the historical
masonry.

ETH 50
mounted to an O&K RH 20 excavator, for low-noise demolition of an air-raid shelter in
the city of Dortmund, Germany.

Hydraulic Engineering

ETH 30
mounted to an O&K RH 9
excavator, for demolishing
a bridge foundation under
water.

ETH 200
mounted to a LIEBHERR 984 excavator, for milling the river bed to lower the
navigable water way of the river Saar in Germany.

Mining Technology

Roadheading Technology

Power Transmission Technology

Service

Foundry

Coke Oven Machinery

Rail-mounted Vehicles

QUALITY SYSTEM

certified by DQS according to


DIN EN ISO 9001 Reg. No. 2298

Eickhoff
Bergbautechnik GmbH
Hunscheidtstrasse 176
D-44789 Bochum Germany
Phone: +49 234. 975-0
Fax:
+49 234. 975-2040
e-mail: [email protected]
Internet: www.eickhoff-bochum.de

10/02/US
Technical alterations without prior notice

The Eickhoff Group

You might also like