Project Management Handbook

Project management handbook
A working tool for project managers
Novartis Foundation
for Sustainable Development
Contents
The Novartis Foundation for Sustainable Development
The project management handbook
Introduction to Project Cycle Management
1.
2.
3.
4.
5.
Project
Project
Project
Project
Impact
identification
preparation, design and planning
implementation and monitoring
review and evaluation
assessment
10
14
18
22
26
Glossary
29
Project management templates
33
1. Project identification
2. Project preparation,
design and planning
3. Project implementation
and monitoring
4. Project review and

evaluation
5. Impact assessment

For thirty years, the Novartis Foundation for Sustainable
Development (NFSD) has been committed to development with
a human face, and is today largely focused on contributing to the
achievement of the Millennium Development Goals (MDGs). The
foundation engages in two thematic areas corporate responsibility and international health and operates in three overlapping
modes:
1. H
ealthcare projects in developing countries in the areas of
(1) improving access to healthcare, (2) strengthening human
resources, and (3) empowering vulnerable groups;
The foundation works with local, national and international

partners, such as ministries of health, research institutes, international organizations and NGOs to increase its impact and scale
up successful pilot projects. Among the Novartis Foundation partners are the World Health Organization (WHO), the Millennium
Villages Project (MVP), the Swiss Tropical and Public Health
Institute (Swiss TPH) and the Tanzanian Ministry of Health and
Social Welfare.
2. T
hink-tank activities through research and publications in business and human rights, corporate responsibility for access to
medicines and healthcare, and stakeholder dialogue;
The Novartis Foundation is not purely a funding agency. It is

actively involved in the Project Cycle Management of the programs
it supports. To improve efficiency, effectiveness and sustainability
of the supported interventions, the foundation deploys a business
mindset and outcome-based thinking in all projects, adopting the
following five approaches wherever appropriate:
3. D
ialogue and networking to build a bridge between the private
sector, governments and civil society.
P
erformance-based funding to increase efficiency and effectiveness of interventions;
ts
ec
oj
Th
in
ities
activ
nk
ta
k-
Healthc
are
pr
R
esearch and analysis to generate evidence on the baseline
situation and on effects of interventions;
U
se of new technologies (e.g. e-learning, m-health, telemedicine) to improve access to and quality of health services;
Social marketing to reach out to patients;
M
ulti-stakeholder partnerships to scale up successful pilot
projects.

NFSD project managers and partner organizations are the primary target audience of this handbook. Project managers of other
organizations that support the implementation of health-related
and other development interventions are the secondary target
audience. This handbook is considered a working tool rather than
a policy or strategic document.
The handbook is structured according to the five phases of the
project cycle. Each chapter describes the steps taken in terms of
identifying, designing and planning, implementing and monitoring a project, as well as with regard to reviewing and evaluating
the progress, effects and impact.
Throughout this handbook reference is made to project management templates for project documents, reports or terms of
reference for consultants.
T
emplates are marked in red and bold when first mentioned
in each chapter and can be downloaded from the Novartis
Foundation website.
Important terms are marked in bold when first mentioned
in each chapter and are further explained in the glossary on
page 29.
F
inally, some of the chapters include references to literature for
further reading.
Further information and the project management templates can be downloaded from the Novartis
Foundation website:
www.novartisfoundation.org/project-management
7

The Novartis Foundation for Sustainable Development (NFSD)
uses two inter-related frameworks for project handling: the
Project Cycle Management (PCM) and the Logical Framework
Approach (LFA).
The PCM describes all management activities and decision making procedures applied during the life cycle of a project. The
cycle consists of five guiding phases (see below).
The framework was developed for the United States Agency

for International Development (USAID) in 1969 to test the
internal logic of a project plan by analyzing it in terms of ends
and means. It examines the relationships and logical linkages
between a plans ends and means (goals, purpose, expected
outcomes and activities) to ensure that these are aligned in a
meaningful way. It also helps to be explicit about the implications of carrying out activities in terms of resources needed,
assumptions made and potential risks.
All five phases of the project cycle are structured according to

the Logical Framework Approach.
This phase provides the indispensable
baseline and contextual information for
a project. It involves understanding
the initial situation in question and the
key factors influencing the situation,
including problems and their causes,
as well as the identification of the main
stakeholders and their interests, needs,
capacities and constraints.
design and planning
The planning phase defines the projects
objectives and purpose, the expected
outcomes and activities necessary to
accomplish them, the monitoring and
evaluation system including indicators,
and the external factors that influence
the project. This phase results in a
project planning matrix and detailed
project plan (including budget, time
frame, contributors etc.) which are both
integral parts of a project document.
and monitoring
When the foundation implements a
project, the project plan is carried out
by the partners, usually supported by
external consultants in specific areas.
Monitoring occurs during the implementation phase to track the projects
progress and determine whether a
project needs to be adapted to suit
changing situations.
The Logical Framework Approach serves as a reference frame

for all parties involved in the project so as not to lose sight of
the original objectives. Solid monitoring and evaluation using
clear performance indicators and means of verification allow
for the progress and effectiveness of the interventions to be
appropriately measured.
Further reading on the Logical Framework Approach:

Blakewell, O. and A. Garbutt (2005): The use and abuse of the logicalframework approach. SIDA.
NORAD (1999): Logical Framework Approach: handbook for objectivesorientated planning. Accessed on 8 March 2013: http://www.norad.no/
en/tools-and-publications/publications/publication?key=109408
rtengren, Kari (2004): A summary of the theory behind the LFA method.
The Logical Framework Approach. SIDA.
design and planning
and monitoring

evaluation
This phase provides a systematic and
objective analysis of the project, its
relevance and design with regard to the
issues identified, its implementation
and its results. An evaluation should
examine the efficiency, effectiveness,
impact and sustainability of the project,
as well as its ability to meet objectives,
and potentially help frame the new
planning process and inform policy.
This phase is concerned with the medium and long-term impact expected,
unexpected, positive and negative of
the project.

evaluation
1. Project
identification
The Novartis Foundation is involved in the entire Project Cycle
Management and proactively identifies projects and partners.
Project proposals are therefore not accepted. However, submitted
project ideas will be evaluated against the thematic priorities and
quality criteria of the foundation. These criteria include:
t he relevance of the project (e.g. does it address a priority
health issue, who are the potential beneficiaries, does it correspond with national health policy, what external assistance
is needed);
t he innovative character of the proposed initiative (e.g. use of
ICTs for more efficient service delivery, partnership models);
t he feasibility and potential scalability of the project (e.g. the
logic of the project in terms of different objective levels, risks
and killer assumptions, absorption capacity of beneficiaries,
management capacity of partner organizations, reasonable
balance between cost and effect);
t he sustainability of the initiative (e.g. participation and contributions of beneficiaries and partners, policy support, built-in
exit strategy, financial viability).
Before developing an overall plan of operation and project document, it is necessary to gain a comprehensive view of the project
context and the baseline situation with regard to the targeted
health issues.
Analyzing the baseline situation involves the following steps:

Step 1. T
he health issues (e.g. maternal and child health) and
target groups (e.g. pregnant women, young mothers and
children under 5 years of age) that the project seeks to

address must be identified.
Step 2. A
baseline survey should be conducted and the existing project context examined. The main questions to be
addressed are:
hat are the causes of the selected issues?

W
What are their effects on different stakeholders?
How do different actors perceive the issues?
What environmental factors affect it or are affected by it?
What is the political context?
What policies are concerned and how are they implemented?
his second step should include a review of existing

T
literature, policies and data on the target health issues,
area and groups.
Step 3. A
dditional necessary data should then be gathered. This
can be done in different ways depending on the scope
of the targeted health and development issues and the
nature and extent of reliable evidence already available.
One method is to conduct interviews and group discussions with key informants. Another is to run a situation
analysis with the potential target groups and other
stakeholders. The major problems and their scope as
well as their causal relationships (cause and effect) identified in the frame of a participatory workshop can be
visualized in a problem tree. Additionally, a Participatory
Rapid Appraisal (PRA) with the potential beneficiaries
and other major stakeholders can be conducted using
qualitative methods (transects, visualizations etc.). These
approaches provide insight into the beneficiaries views
on the issues at hand and their possible solutions.
design and planning
and monitoring

evaluation
11
1. Project
identification
Step 4. T
he most rigid and scientifically sound way of establishing the baseline conditions is to develop and carry out
a longitudinal study with the support of experts that
allows for a comparison of the baseline situation with
the post-intervention situation (see Chapter 4: Project
review and evaluation). A comprehensive stakeholder
analysis (organizations, individuals, networks etc.) of
parties directly or indirectly, positively or negatively
affected by the future project as well as their nature
and roles, interests and needs, capabilities (strengths
and weaknesses) and linkages (power relations, conflicts of interest, cooperation with/dependency on other
groups) should also be conducted. This allows the identification of opportunities and threats for the projects
success and helps determine who should be involved in
the project planning, implementation, monitoring and
evaluation. During this stakeholder mapping exercise it
is important to consider and agree on which groups and
their respective interests and views are given priority.
For stakeholder analysis, methods such as the ECRIS
method can be used.
Step 5. In the objective analysis, the problem tree (if one has
been developed) is transformed into an objectives
tree, which highlights future solutions to the identified
problems. Working from the top down, all problems
are reworded to make them objectives (positive statements). For instance, the problem undernourishment
and malnourishment as well as malaria lead to high
child and infant mortality can be reworded as an
objective in the following way: reducing the prevalence of undernourishment and malnourishment as
well as malaria cases contributes to better health status of children and reduced child mortality.
12
Step 6. T
he background of the project and the baseline situation
with regard to the issues addressed (including national
and international policies and approaches relevant to
the health issue), the objectives and the main expected
outcomes, the selected target areas and populations as
well as the potential project partners and main stakeholders should be described in a short concept note or
project description. At this stage, the concept note does
not necessarily need to include the detailed strategy and
approaches to be applied or all the key activities to be
carried out in order to reach the objectives and expected
outcomes.
Step 7. A
fter developing a short concept note containing the
objectives and the main expected outcomes of the project, depending on its scope, an alternative analysis can
be conducted to identify possible options for a project
strategy. After identifying several options for the project
strategy and assessing the feasibility of these options,
one project strategy should be agreed upon. A feasibility study investigates whether the project objectives and
strategy are economically, politically, socially, culturally
and/or ecologically feasible. An ex-ante evaluation goes
further and assesses the anticipated future performance
and effects of an intervention.
Further reading on methods for baseline data collection and the problem tree:
design and planning
and monitoring

evaluation
Bierschenk, Thomas and Jean-Pierre Olivier de Sardan (1997): ECRIS:

Rapid Collective Inquiry for the Investigation of Conflicts and Strategic
Groups. In: Human Organization. Journal of Applied Anthropology 56:
238 245.
Gosling, Louisa and Mike Edwards (2003): Toolkits. A practical guide
to planning, monitoring, evaluation and impact assessment. Save the
Children. P. 244-45; 302.
13
2. Project
preparation,
design and
planning
2. Project preparation, design and planning

Following the project identification phase, the project needs to
be properly prepared, designed and planned. The project design
defines the main components of the project, including overall
objectives, project purpose, beneficiaries strategy and organization. Depending on the scale and scope of the project, the design
phase may be conducted in multiple steps. In a first step, a project planning matrix and an overall/annual plan of operation are
developed. These constitute important pillars and are an integral
part of a project document. The matrix can be developed as part
of a planning workshop in which representatives of all project
partners, important stakeholders and potential target groups/beneficiaries should participate (including authorities, NGOs active in
the targeted intervention fields and experts in the respective fields).
Results from the baseline survey, problem analysis, stakeholder
map or any other contextual information (see Chapter 1: Project
identification) should serve as a basis for the planning exercise.
Such a workshop should ideally be coordinated by a professional
facilitator who will not be involved in the project later on.
left to the project team and feature in the overall plan of operation that builds upon and refines the project planning matrix.
Nevertheless, the main project implementation strategies and
approaches should be agreed upon during the workshop.
The planning of a project should include the development of a
monitoring and evaluation plan that is tailored to the projects
overall plan of operation. Quantitative and qualitative performance and impact indicators should be defined to measure the
projects progress and results, and to observe the changes in
the project context. Furthermore, means of verification as well
as crucial external factors should be identified. Hence, for each
level (objectives, purpose, outcomes and activities), Objectively
Verifiable Indicators (OVI) are formulated that measure the performance and the impact of the project. These indicators should
follow the SMART principles (see box below).
design and planning
and monitoring
Formulating indicators the SMART principles:
The project planning matrix defines an ambitious but realistic

project purpose, overall objectives, expected outcomes and key
activities. These main project elements can be derived from the
objectives tree if available. The first step in developing the matrix
is to agree upon a project purpose, which describes what the project aims at achieving on its own. The second step is to formulate
the overall objectives to which the project wants to contribute,
but cannot achieve on its own. Third, the expected outcomes are
stated. The formulated expected outcomes must each be necessary and as a whole be sufficient to ensure the projects purpose
is achieved. The next step is to identify key activities for each
of the formulated expected outcomes. These activities should
be target oriented and stated as actions. The entirety of all key
activities should ensure that the respective expected outcomes are
achieved. Sub-activities are usually not defined in this initial workshop due to time constraints; rather, their identification should be
Specific: Key indicators need to be specific and relate to the conditions

the project seeks to change.
Measurable: Quantifiable indicators are preferred because they are precise, can be aggregated and allow statistical analysis of data. However,
progress indicators may be difficult to quantify and qualitative indicators
should be used in these cases.
Achievable: Indicators must be achievable at a reasonable cost using
an appropriate collection method. Accurate and reliable information on
things such as household incomes is difficult and expensive to collect.

evaluation
Relevant: Indicators should be relevant to those people who will use the
data and make decisions based on the results.
Time-bound: An indicator needs to be collected and reported at the right
time to influence management decisions. There is no point choosing performance indicators that can only tell you at the end of a project whether
adequate progress has been made and the expected outcomes achieved.
15
2. Project
preparation,
design and
planning
Performance and effects can be measured at four levels: inputs,

outputs, outcomes and impact. While inputs relate to the implementation of activities (e.g. medical training), outputs are the
effects of the activities carried out (e.g. improved level of medical
knowledge or skills). Outcomes relate to the expected outcomes
(e.g. this may include better quality of care following the application of new medical knowledge and skills). Finally, impact relates
to the overall objective (e.g. improved health situation, at least
partially due to better quality of care).
Measuring the performance and effects of a project:
Inputs
Outputs
Outcomes
Impact
Have all the inputs been provided that are necessary

to achieve the desired outputs?
e.g. medical training of providers
Did the inputs produce the desired outputs?

e.g. improved medical skills level
Did the produced outputs lead to the expected outcomes?

e.g. better quality of healthcare through the application
of new acquired medical skills
Did the outcomes lead to the desired impact?

e.g. improved health situation
Lastly, external factors and assumptions for each level of the

causal hierarchy of design elements (from activities to overall
objective) are stated. These describe important events (e.g.
climatic variations), conditions (e.g. management capacity, willingness of political authorities) or decisions beyond the control of
the project, which must be either given or avoided to ensure the
achievement of the project purpose. They include possible risks
and opportunities for the project. This is especially important for
the project purpose level.
If capacity building measures for partner organizations are a key
component of a project, then alternative planning approaches
combining the Logical Framework Approach with elements of
outcome mapping may be appropriate. In such an approach,
aspects of capacity building of partner organizations and a
results focus are combined. The assumption is that strengthened
key actors and changes in their behavior will produce sustainable improvements at impact level. Hence, in addition to result
oriented project goals, the desired situation in terms of practices
and behavior of the project partners is also formulated. Moreover,
such an approach includes and emphasizes the definition of
roles and tasks of each project partner and of the project team.
Therefore, goals are defined not only at the effect level, but also
for the operational domain.
Next, the project planning matrix is translated by the project team
into an overall/annual plan of operation that identifies the subactivities for each key activity. The following steps should be taken
to establish the plan:
1. Identify adequate sub-activities for each defined key activity
that are necessary to achieve the respective expected outcome;
Furthermore, means of verification are identified for each of

these OVIs that allow you to check whether and how they really
have been measured. The means of verification are ways of
measuring or collecting data about each of the OVIs.
16
2. Determine timeframe of sub-activities (per month or quarter);

3. Estimate costs of each sub-activity;
4. D
etermine who is responsible (person or party) for each subactivity or key activity;
5. S
et milestones to be achieved for the expected outcomes and
their main key activities and sub-activities.
Once the project planning matrix and the overall plan of operation
are finalized, a project document should be written explaining the
elements of the project planning matrix and overall plan of operation in more detail (i.e. the objectives, expected results, activities,
external risks and opportunities), and describing the background
of the project and the baseline situation (i.e. the target issues,
existing sector policies and other initiatives in the field), the
geographical target areas and beneficiaries, the project partners
and stakeholders, as well as the project implementation strategy,
organization and budget and the monitoring and evaluation
system. This document should not exceed 50 pages including
appendices.
Before the start of the project, a Memorandum of Understanding
(MoU) with the partners who manage the project implementation
must be prepared and duly signed, and a project team must be
established.
The MoU should contain articles on the objectives, the duration
and the agreed use of funds, as well as on the conditions for the
release of funds and their application. This refers to performancebased payments which depend on the achievement of mutually
agreed milestones (see Chapter 3: Project implementation and
monitoring) a mechanism that the NFSD applies in all projects.
In addition to the milestone table that summarizes all annual
milestones, their deadlines, means of verification and respective
monetary values, the annual plan of operation and the budget
are integral parts of the MoU. Finally, the MoU should stipulate
the commitments of both parties (including reporting and audit
requirements) of the NFSD and the partner organization and
contain sections on intellectual property rights, suspension and
governing law and jurisdiction. In the case of the NFSD, all MoUs
must be reviewed by a legal authority before signing.
Generally, the project partner of the NFSD is responsible for identifying and hiring qualified and motivated project staff. Since the
NFSD supports the project management of the partner, the respective NFSD project manager should be involved in the formulation
of the job description for the main project staff. While the NFSD
project managers should be consulted by the partner concerning
the selection and salary package for the key staff, it is ultimately
the partners responsibility as an employer to determine the
employment terms of staff since the salaries must fit into the partner organizations salary scale. The job description should state
the position and related tasks and responsibilities of the respective
staff in the project team as well as the requirements in terms of
education, skills and work experience.
Once established, the project team prepares a detailed plan of
operation that also specifies the sub-activities of each key activity as identified in the project planning workshop. The team also
prepares a budget based on the annual plan of operation and
project document.
design and planning
and monitoring
Further reading on the Logical Framework and the Outcome Mapping

Approaches:
Blakewell, O. and A. Garbutt (2005): The use and abuse of the Logical
Framework Approach. SIDA.
Earl, S., F. Carden and T. Smutylo (2001): Outcome Mapping Building
Learning and Reflection into Development Programmes. International
Development Research Centre (IDRC) Ottawa.

evaluation
Gosling, Louisa and Mike Edwards (2003): Toolkits. A practical guide

to planning, monitoring, evaluation and impact assessment. Save the
Children.
Roduner, Daniel, Walter Schlppi and Walter Egli (2008): Logical
Framework Approach and Outcome Mapping. In: Rural Development
Newsletter. 2. Lindau: AGRIDEA. Accessed on 8 March 2013: http://
www.agridea-lindau.ch/fileadmin/10_International/Petra_ab0508/PDF/
Logical_Framework_and_Outcome_Mapping.pdf
17
3. Project
implementation
and monitoring
3. Project implementation and monitoring

After the development of the project document, including the
project planning matrix and overall/annual plan of operation,
the project is ready for implementation and the partner organizations and beneficiaries can carry out the activities. The first
plan of operation should cover at least the upcoming six months.
Subsequent annual plans of operation are worked out at regular
planning meetings with the relevant stakeholders. NFSD holds
annual review and planning meetings that focus on the activities
and outcomes of the project. At these meetings the previous years
outputs and outcomes are reviewed, and based on the discussions,
the next plan of operation is established.
The conditions of collaboration, including the payment conditions, must be stated in a consultancy agreement between the
NFSD and the respective consultant. In the agreement, the key
deliverables by the consultant should be specified, fees and
expenses stipulated, confidentiality, intellectual property rights
with regard to the services defined, as well as the termination and
liability conditions determined. For consultancies that go beyond
limited technical support or evaluations and instead concern
project management assignments, it is advisable to engage in formal contract negotiation with the consultant and main partners,
especially when these are government authorities.
Usually, some components of each project are technically supported or assessed by experts or consultants. The need for
consultants should be carefully evaluated before identifying and
contracting them. The deliverables must be clearly defined in
a Terms of Reference for consultants document, which should
be developed by the NFSD project manager and the partner
organizations. All involved parties consultant, NFSD and partner organizations should express their expectations and agree
on the role of the consultant. A consultant should build on the
information, data and knowledge available with the partners
and beneficiaries, and aim at building their capacities. In this
way, ownership for the work undertaken by the consultant and
its results can be promoted. It is the responsibility of the NFSD
project manager to introduce the consultant to the project partners and setting in order to lay the foundations for an effective
collaboration. The Terms of Reference should contain a description of the background and objectives of the project and state
the purpose of the consultancy assignment and the services to
be delivered (e.g. technical support, survey). Moreover, the Terms
of Reference defines the reporting requirements and approval
procedures as well as the institutional arrangement as far as the
working relationships, supervision and feedback mechanisms of
the consultancy assignment are concerned.
After each consultancy mission, the consultant is to deliver a

short consultancy mission report which is to be shared with
NFSD and the partner organization. This report should comprise
sections on context and objectives of the consultancy mission,
activities carried out, main findings, recommendations, conclusions and appendices. The report should not exceed three to five
pages. The invoice of the consultant should specify the number
of days and half days spent on each activity as stipulated in the
consultancy agreement and Terms of Reference, the cost per day
and possible extra cost (travel, accommodation etc.). Long-term
consultancy assignments should be regularly reviewed by the
involved parties.
Additionally, as partner organizations carry out the project work
and management, fund disbursement should be managed using
a performance-based funding approach. In this instance, the
NFSD and the partner organization agree on key milestones that
are derived from the overall/annual plan of operation. Deadlines,
amount of funds and means of verification are defined for
each milestone in a milestone table. The milestones should be
fixed at the beginning of the year before the start of activities.
The achievement of each key milestone triggers a disbursement. A mid-year review allows milestones and deadlines to be
design and planning
and monitoring

evaluation
19
3. Project
implementation
and monitoring
amended if the partner organization can reasonably justify the

proposed changes. Generally, all defined milestones need to
be achieved within the respective calendar year. In exceptional
instances, a milestone disbursement can be postponed to the
following year (maximum until the end of March) if the partner
organization can give valid reasons as to why the delay was
beyond their control.
During implementation, the project should be continuously
monitored to track project performance and developments in
external factors. Monitoring covers crucial indicators which are
routinely and regularly measured, for example, utilization rates
for the targeted health services such as attended deliveries or
antenatal care.
There are four main reasons for undertaking monitoring and
evaluation activities:
1. A
ccountability: through monitoring outputs, outcomes and
impact, an implementing agency can demonstrate efficient
and effective use of funds.
2. Improve performance: monitoring and evaluation help identify shortcomings or inefficiencies in the project strategy,
approaches and implementation which can in turn lead to
readjustment and improvement.
3. L
earning: proper documentation helps both the specific
project or program, but can also be shared with other implementers.
20
4. C
ommunication: monitoring and evaluation provide an opportunity for dialogue with different stakeholders and inform
policy formulation.
Project managers of NFSD-supported initiatives report on the
progress of the project twice a year. They provide a progress
report on the first six months of a year at the latest by the end
of August, and an annual report by the end of March the following year. These reports should include an executive summary
and a short introduction with the rationale, context and objectives. Project progress (activities carried out for each expected
result, major achievements and challenges of the past trimester
or year) should be detailed in the annual report. Furthermore,
sustainability measures and challenges, conclusions and outlook
(containing important changes and external factors relevant to
the interventions) and budget execution should also be covered.
design and planning
and monitoring

evaluation
21
4. Project review
and evaluation
4. Project review and evaluation

Project review and evaluation is an important component of
Project Cycle Management. Reviewing and evaluating projects
allows, on the one hand, their performance and effects to be
measured. On the other, it is crucial to learn from experience
and adjust interventions, share lessons learned with others and
inform policy. In general, evaluations should consider factors
beyond those tracked through routine monitoring (see Chapter
3: Project implementation and monitoring). For example, evaluations should additionally consider the relevance of the project
interventions to achieving the stated purpose and effects, as well
as the efficiency of the projects design and implementation (with
regard to the selected strategy, approaches and organizational
structure in addressing the identified health issues).
There are two types of evaluation: internal and external. Internal
evaluations can take place, for example, as part of an annual review
and planning workshop during which the project performance in
a given year is analyzed against the annual plan of operation.
Depending on changes in the project environment and the gained
experience, expected results, key activities and indicators can
be altered to ensure the project purpose. Some projects have
built-in scientifically sound evaluations that allow comparisons of
the initial baseline situation with the post-intervention situation
to provide insight into the difference that the project has made.
An alternative to such a longitudinal before-after evaluation is a
Randomized Controlled Trial (RCT). An RCT assesses the efficacy
and effectiveness of a project intervention by comparing a target
with a control group. Participants are similar in the sense that
they all fulfill defined eligibility criteria. They are randomly sampled and allocated to one of the groups whereby the target group
is exposed to the intervention while the control group does not
benefit from it. Such RCTs are scientifically more rigid, but also
more costly. Moreover, RCTs can be considered unethical if the
control group does not benefit from the interventions at least at a
later stage. RCTs are also further criticized for being simplistic in
the sense that they follow a cause-effect relationship and do not

properly take into account the complexity and interdependence
of different development problems.
External evaluations are independent assessments conducted by
development experts or research institutes. Evaluations done by
development experts usually investigate the relevance and design
of the project as well as the projects implementation, progress
and outcomes based on the evidence provided by the project
team and data that can be gathered during the evaluation mission of about two weeks. This type of external evaluation is usually
chosen for a mid-term evaluation. This allows further effective
guidance for the project. NFSD conducts such evaluations during the implementation phase of a project. However, external
evaluations can also be conducted by research organizations as
described above for internal evaluations. Such evaluations are
often carried out as ex-post evaluation (before-after design)
after a project is terminated. Examples of scientifically sound
evaluations with the involvement of NFSD project managers
include two projects in Tanzania that aimed at improving access
to effective treatment for malaria and TB.
The Terms of Reference for external evaluators are based on
the elements of the Logical Framework Approach. Evaluations
should not only examine the immediate objectives and purpose,
expected results and activities, but, wherever possible, also the
impact and sustainability of the project. Terms of Reference
should contain depending on the role of the consultant a
description of the context and rationale of the project and its
purpose, expected outcomes and key activities. Moreover, they
should state the objectives and expected deliverables of the
evaluation, specific issues and aspects to be analyzed, the methodology to be applied, duration, reporting requirements as well
as the required profile of the evaluators and their division of tasks
(if more than one consultant is involved). Evaluators should also
design and planning
and monitoring

evaluation
23
4. Project review
and evaluation
be guided as to which key actors and documents they should
consult. External evaluations conducted by development experts
are reported using a mid-term/final evaluation report. This
report should contain a clear summary with the main findings
and recommendations. The report should include an introduction
(rationale, objectives and methodologies used for the evaluation),
followed by assessments of the project design, implementation,
outcomes and effects. The conclusion should cover the findings
of the evaluation, including lessons learned and recommendations. The Terms of Reference, list of key people and documents
consulted, areas sampled and methodological tools used should
be included in the appendices.
Further reading on the pros and cons of different methodologies of measuring effectiveness and impact:
Bamberger, M., J. Rugh and L. Mabry (2012): RealWorld Evaluation
Working under budget, time, data and political constraints. Second edition. Thousand Oaks, London, New Dehli, Singapore: Sage.
See also www.realworldevaluation.org
24
design and planning
and monitoring

evaluation
25
5. Impact
assessment
Impact assessment is the systematic analysis of significant or
lasting changes positive or negative, intended or not brought
about in peoples lives by a given action or series of actions.
Impact assessment therefore considers more than the immediate, predicted outputs and outcomes of an intervention (project
or program) and is much more concerned with the implications
in the medium and long term. Impact assessments are typically
conducted at the end of a project or even a few years later. They
should include assumptions of expected, unintended, positive
and negative impacts.
In order to meaningfully measure lasting change after the termination of a project, it is vital that change processes are tracked
throughout the project cycle. Understanding and managing
change should therefore be a focus of ongoing monitoring and
evaluation of the project cycle.
Not many initiatives include impact assessments after the

termination of a project since they are rather complex and
costly. Generally in the frame of scientifically sound analysis,
it is difficult to determine whether change beyond the project
purpose (e.g. at the level of the overall objectives) can be attributed to the project interventions or to other confounding factors.
Nonetheless, impact assessments are particularly beneficial for
pilot projects and larger scale programs that are relevant to
national or even international health policies. Examples of NFSDsupported assessments include a study on the contribution of
malaria related interventions to the reduction of child mortality
in two Tanzanian districts, another study on the effect of health
insurance membership on financial protection of households in
rural Mali, and a study on the impact of psychosocial support
for children affected by poverty, conflict, HIV and AIDS on their
livelihoods.
Examples of NFSD-supported assessments can be found under Impact assessments in the publications
section on the Novartis Foundation website:
www.novartisfoundation.org/publications
design and planning
and monitoring

evaluation
27
Glossary
Glossary
Alternative analysis Process to identify a range of potential project
strategies; conducted as part of the project identification phase.
ECRIS method Rapid collective inquiry for the investigation of conflicts

and strategic groups in local settings.
Annual report Provided by project managers to report on the performance and results of the project as well as important developments in
the project context. Template available.
Effectiveness The extent to which the program or project objectives

were achieved, taking into account their relative importance.
Assumptions External conditions and factors that need to be in place

for the project to succeed.
Baseline survey Data collection as part of the project identification
phase to understand the existing project context and the characteristics
of the (target) population before a project is set up. The gathered data
can then be compared with a study of the same characteristics carried
out later in order to see what has changed.
Beneficiaries Individuals, groups or organizations, whether targeted
or not, that ultimately benefit, directly or indirectly, from a program or
project.
Efficiency A measure of how well resources and inputs (funds, expertise,

time, etc.) are converted into outputs.
Facilitator A person who coordinates, rather than leads, an exercise,
encouraging participation by others and ensuring that those involved do
not lose sight of the main objectives.
Feasibility study Investigation of whether the project objectives and
strategy are financially, politically, socially, culturally and/or ecologically
feasible.
Capacity The resources (people, money), skills, knowledge and organization required to carry out a particular task.
Framework A framework is a way of organizing information so that

it can be more easily understood and interpreted. For example, a child
rights framework for a situation analysis may mean that information
about a situation is collected and interpreted according to violations of
selected child rights.
Change processes Parts of a projects context that are continually monitored. Change processes must be tracked to meaningfully measure the
projects lasting impact.
Impact The changes, intentional and unintentional, positive or negative,

a project brings about beyond its original purpose (e.g. improved health
status).
Concept note A short note detailing the issues to be addressed, the

objectives and the main expected outcomes of the project; formulated
as part of the project identification phase. Template available.
Impact assessment Fifth and final stage of the project cycle (see
Chapter 5 on page 26); examines the medium and long-term impact
expected, unexpected, positive and negative - of the project.
Consultancy agreement Agreement on the conditions of collaboration

between the organization and the respective consultant. Includes payment conditions, key services to be delivered, confidentiality principles
and intellectual property rights. Template available.
Implementation and monitoring Stage three of the project cycle (see

Chapter 3 on page 18); involves implementation of project activities and
tracking of the projects progress.
Consultancy mission report Report provided by the consultant on the

content, results, conclusions and recommendations of his/her consultancy mission. Template available.
Indicators Quantitative and qualitative performance and impact parameters that measure achievements and results, reflect the processes that
led to them (whether and how activities that were planned have been
carried out) and observe the changes in the project context.
29
Glossary
Inputs The organization and provision of resources to implement

activities (e.g. training).
Objectively Verifiable Indicator (OVI) Measures, direct or indirect, that

verify to what extent the project objectives have been achieved.
Key activities Target oriented actions that contribute to the respective

expected outcomes.
Participatory Rapid Appraisal (PRA) The approach aims at incorporating the knowledge, perceptions and opinions of the potential beneficiaries
in the planning and management of development projects and programs.
Logical Framework Approach (LFA) Developed by the United States

Agency for International Development (USAID) in 1969 to test the logic
of a plan. It examines the relationships and logic between a plans levels
(inputs, activities, outputs, purpose and goal).
Means of verification Sources from which an individual obtains the
data necessary to prove the objectives defined by the indicator have
been reached.
Memorandum of Understanding (MoU) Document describing a
bilateral or multilateral agreement between parties. It expresses a convergence of will between the parties, indicating an intended common
line of action. Template available.
Milestone table Summarizes all annual milestones derived from the
plan of operation, their deadlines, means of verification and respective
monetary values. Template available.
Objectives tree Part of the project identification stage; frames causal
relationships in problem tree as objectives (positive future solutions to
the problems).
Outcomes Results of a program or project with respect to its objectives
and expected results (e.g. improved quality of care through application
of acquired medical skills).
Outputs Total of all the products and services of a project as a result
of the activities (e.g. improved level of medical knowledge or skills following training).
Overall objective The broader goal to which a project or program
once it has achieved its purpose is intended to contribute.
30
Overall/annual plan of operation Identifies sub-activities (including

timeframe, budget, and person responsible) for each key activity defined
in the project planning matrix. Template available.
Performance-based funding Method of fund disbursement where partner organization receive funds after the achievement of well-defined and
mutually agreed milestones.
Preparation, design and planning Stage two of the project cycle
(see Chapter 2 on page 14); defines the projects objectives, purpose,
expected outcomes, activities and indicators, and the external factors
influencing the project.
Problem tree Visualization of the causal relationships (cause and effect)
of a problem; created during the project identification phase.
Program A multi-level package of measures within the same sector
(e.g. health), theme and/or geographical area, requiring multi-level
planning and structuring, leading towards an overall goal. Programs are
disaggregated into (individual) projects for reasons such as complexity
(delimiting issues, allocating tasks, competence, division into manageable sectors).
Progress report Provided by project managers mid-year to report on
the progress of the project. Template available.
Project A project is a package of measures (a discrete series of
activities) limited or capable of limitation in regional, social, subject and
temporal terms, which is implemented by NFSDs partners or other organizations in order to reach a common objective that has been precisely
designated beforehand and is objectively verifiable. A project may be part
of an overarching program.
Project cycle NFSD projects are guided by five stages: project identification; preparation, design and planning; implementation and monitoring;
review and evaluation; and impact assessment.
Project Cycle Management (PCM) Describes all management activities
and decision making procedures used during the life cycle of a project.
Glossary
Project document Details the main elements of the project including

overall objective, project purpose, key activities and the main expected
outcomes of the project. The project planning matrix and overall plan of
operation are the main components of the project document. Template
available.
Stakeholder Individual, group or organization that has an interest in a

project or will be affected positively or negatively by the issues to be
addressed and actions to be taken. Stakeholders differ from participants
in that some stakeholders e.g. future generations do not take part in a
project but will at some point be affected by it.
Project identification Stage one of the project cycle (see Chapter 1

on page 10); provides the background information for a project, including information on key factors influencing the situation and the main
stakeholders.
Stakeholder map Document detailing the individuals, groups or organizations who have an interest in a project or will be affected positively
or negatively by the project, and their problems, interests, potentials
and linkages.
Project planning matrix Detailed project plan including monitoring and

evaluation system; developed based on the concept note and one of the
main elements of a project document. Template available.
Sustainability The continuation of (intentional) benefits and effects

generated by a program or project after its termination (institutional,
social, economic and environmental sustainability).
Project purpose The intended physical, financial, institutional, social,

environmental or other main goal which a project or program is expected
to achieve and which lies in its own sphere of influence. The purpose
should both indicate the changes the project aims at achieving and at the
same time be specific, time-bound and measurable.
Terms of Reference (ToR) A plan of action for an exercise; they clarify

aims, issues to be addressed, methods to be applied, organization and
tasks for a partner organization, local staff or a consultant. Template
available.
Randomized Controlled Trial (RCT) A specific type of scientific experiment, and the preferred design for a clinical trial. Often used to test the
efficacy of various types of intervention within a patient population.
Relevance The extent to which the overall goals and project purpose
of a program or project is consistent with beneficiaries needs, country
priorities and policies, and global priorities.
Review and evaluation Stage four of the project cycle (see Chapter 4
on page 22); provides a systematic and objective analysis of the project, including its efficiency, effectiveness, impact and sustainability with
regard to meeting objectives.
Situation analysis Data collection and analysis on particular issues to
be addressed by a project and their broader context as a basis for a sensible assessment of what needs to be done.
SMART principles Indicators should be: Specific, Measurable, Achievable,
Relevant and Time-bound.
31

The following is a list of project management templates referred to throughout this handbook:
Concept note
Project planning matrix
Overall/annual plan of operation
(including milestone table)
Project document
Memorandum of Understanding
Terms of Reference for consultants
Consultancy agreement
Consultancy mission report
Progress/annual report
Terms of Reference for external evaluators
Mid-term/final evaluation report
The templates can be downloaded from the Novartis Foundation website:

www.novartisfoundation.org/project-management
33
Design iPixel Andr Hasse, Basel. Print Steudler Press, Basel

Photography Nana Kofi Acquah, Paroma Basu, Christian Flierl, Joachim Pelikan
Novartis Foundation for

Sustainable Development
Novartis Campus
WSJ-210.10.26
4002 Basel
Switzerland
Telephone +41 (0)61 696 23 00
Fax
+41 (0)61 696 23 33
[email protected]
www.novartisfoundation.org
2013 Novartis Foundation
for Sustainable Development
neutral
Printed Matter
No. 01-11-214980 www.myclimate.org
myclimate The Climate Protection Partnership
This brochure was printed

on FSC-certified paper.

Project Management Handbook

Uploaded by

Copyright:

Available Formats

Project Management Handbook

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Project Management Handbook

Uploaded by

Copyright:

Available Formats

Project management handbook

A working tool for project managers