LFXX Datasheet

LFXX
Very low drop voltage regulator with inhibit function

Datasheet - production data
Description
TO-220
TO-220FP
PPAK
DPAK
Features
Very low-dropout voltage (0.45 V)
Very low quiescent current (typ. 50 A in OFF
mode, 500 A in ON mode)
Output current up to 500 mA
Logic-controlled electronic shutdown
Output voltages of 1.5; 1.8; 2.5; 3.3; 4.7; 5; 6;
8; 8.5; 9; 12 V
Automotive grade product: 1.8 V, 2.5 V, 3.3 V,
5.0 V, 8.0 V, 8.5 V VOUT in DPAK and PPAK
packages
The LFXX is a very low drop regulator available in

TO-220, TO-220FP, DPAK and PPAK packages
and in a wide range of output voltages. The low
drop voltage (0.45 V) and low quiescent current
make it particularly suitable for low-noise, lowpower applications and especially in batterypowered systems. In the 5 pin configuration
(PPAK) a shutdown logic control function is
available (pin 2, TTL compatible). This means that
when the device is used as a local regulator, a
part of the board can be put in standby,
decreasing the total power consumption. In the
three terminal configuration, the device has the
same electrical performance, but it is fixed in ON
state. It requires a capacitor of only 2.2 F for
stability, saving board space and costs. The LFXX
is available as automotive grade in DPAK and
PPAK packages, for the options of output
voltages whose commercial part numbers are
shown in the order codes. These devices are
qualified according to the specification AEC-Q100
of the automotive market, in the temperature
range - 40 C to 125 C, and the statistical tests
PAT, SYL, SBL are performed.
Internal current and thermal limit

Only 2.2 F for stability
Available in 1% (AB) or 2% (C) selection at
25 C
Supply voltage rejection: 80 db (typ.)
Temperature range: from -40 to 125 C
March 2015
This is information on a product in full production.
DocID2574 Rev 28
1/53
www.st.com
Contents
LFXX
Contents
1
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6.1
TO-220 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.2
TO-220 packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.3
DPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.4
PPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
6.5
DPAK and PPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2/53
DocID2574 Rev 28
LFXX
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Table 18.
Table 19.
Table 20.
Table 21.
Table 22.
Table 23.
Table 24.
Table 25.
Table 26.
Table 27.
Table 28.
Table 29.
Table 30.
Table 31.
Table 32.
Table 33.
Table 34.
Table 35.
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LF15AB electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
LF18AB electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
LF18C electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
LF18C (automotive grade) electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
LF25AB electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
LF25AB (automotive grade) electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LF50AB (automotive grade) electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LF120AB electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
LF120C electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
TO-220 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
TO-220FP mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
DPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
PPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
DPAK and PPAK tape and reel mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
DocID2574 Rev 28
3/53
53
List of figures
LFXX
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
4/53
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pin connections (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dropout voltage vs. output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Dropout voltage vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
upply current vs. input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Supply current vs. input voltage (no load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Short-circuit current vs. input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Supply current vs. temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Logic-controlled precision 3.3/5.0 V selectable output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Sequential multi-output supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Multiple supply with ON/OFF toggle switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Basic inhibit functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Delayed turn-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Low voltage bulb blinker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TO-220 (STD-ST dual gauge) package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
TO-220 (STD-ST single gauge) package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
TO-220FP package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TO-220 dual gauge tube outline (dimensions in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
TO-220 single gauge tube outline(dimensions in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
DPAK package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DPAK recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
PPAK package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
DPAK and PPAK tape outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
DPAK and PPAK reel outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
DocID2574 Rev 28
LFXX
Diagram
Diagram
Figure 1. Block diagram
DocID2574 Rev 28
5/53
53
Pin configuration
LFXX
Pin configuration
Figure 2. Pin connections (top view)
TO-220
TO-220FP
DPAK
PPAK
Note:
6/53
TAB is electrically connected to GND on TO-220, PPAK and DPAK packages
DocID2574 Rev 28
LFXX
Maximum ratings
Maximum ratings
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
-0.5 to 40(1)
VI
DC input voltage
IO
Output current
Internally limited
PTOT
Power dissipation
Internally limited
TSTG
Storage temperature
range
-40 to 150
TOP
Operating junction
temperature range
-40 to 125
1. For 18 < VI < 40 the regulator is in shutdown.
Table 2. Thermal data

Symbol
Parameter
TO-220
TO-220FP
DPAK/PPAK
Unit
RthJC
Thermal resistance junction-case
C/W
RthJA
Thermal resistance junction-ambient
50
60
100
C/W
Figure 3. Test circuit
LFXX
DocID2574 Rev 28
7/53
53
Electrical characteristics
LFXX
Refer to test circuits, TJ = 25 C, CI = 0.1 F, CO = 2.2 F unless otherwise specified.
Table 3. LF15AB electrical characteristics
Symbol
Parameter
VO
Output voltage
VI
Operating input voltage
IO
Output current limit
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 3.5 V
1.485
1.5
1.515
IO = 50 mA, VI = 3.5 V, Ta = -25 to 85 C
1.470
1.530
2.5
16
Unit
V
IO = 500 mA
V
A
VO
Line regulation
VI = 2.5 to 16 V, IO = 5 mA
10
mV
VO
Load regulation
VI = 2.8 V, IO = 5 to 500 mA
10
mV
VI = 2.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
Supply voltage rejection
VI = 2.8 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
65
IO = 5 mA, VI = 3.5 1 V
mA
12
100
dB
eN
Output noise voltage
B = 10 Hz to 100 kHz
50
Vd
Dropout voltage
IO = 200 mA
VIL
Control input logic low
Ta = -40 to 125 C
VIH
Control input logic high
Ta = -40 to 125 C
Control input current
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
8/53
DocID2574 Rev 28
0.8
2
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 3.3 V
1.782
1.8
1.818
IO = 50 mA, VI = 3.3 V, Ta = -25 to 85 C
1.764
1.836
16
Unit
V
IO = 500 mA
V
A
VO
Line regulation
VI = 2.8 to 16 V, IO = 5 mA
12
mV
VO
Load regulation
VI = 3.3 V, IO = 5 to 500 mA
10
mV
VI = 2.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
VI = 3.1 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
60
IO = 5 mA, VI = 3.5 1 V
mA
12
100
dB
eN
50
Vd
Dropout voltage
IO = 200 mA
0.7
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
DocID2574 Rev 28
0.8
2
V
V
10
10
9/53
53
LFXX

Table 5. LF18C electrical characteristics
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 3.5 V
1.764
1.8
1.836
IO = 50 mA, VI = 3.5 V, Ta = -25 to 85 C
1.728
1.872
16
Unit
V
IO = 500 mA
V
A
VO
Line regulation
VI = 2.8 to 16 V, IO = 5 mA
12
mV
VO
Load regulation
VI = 3.3 V, IO = 5 to 500 mA
10
mV
VI = 2.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
VI = 3.1 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
60
IO = 5 mA, VI = 3.5 1 V
mA
12
100
dB
eN
50
Vd
Dropout voltage
IO = 200 mA
0.7
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
10/53
DocID2574 Rev 28
0.8
2
V
V
10
10
LFXX
Refer to test circuits, Ta = -40 to 125 C, CI = 0.1 F, CO = 2.2 F unless otherwise specified.
Table 6. LF18C (automotive grade) electrical characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 3.5 V, Ta = 25 C
1.764
1.8
1.836
IO = 50 mA, VI = 3.5 V
1.713
1.887
16
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 2.8 to 16 V, IO = 5 mA
15
mV
VO
Load regulation
VI = 3.3 V, IO = 5 to 500 mA
15
mV
VI = 2.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
VI = 3.1 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
60
IO = 5 mA, VI = 3.5 1 V
Ta = 25 C
mA
12
120
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 6 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
11/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 4.5 V
2.475
2.5
2.525
IO = 50 mA, VI = 4.5 V, Ta = -25 to 85 C
2.450
Unit
V
2.550
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 3.5 to 16 V, IO = 5 mA
12
mV
VO
Load regulation
VI = 3.8 V, IO = 5 to 500 mA
12
mV
VI = 3.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
VI = 3.8 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
65
IO = 5 mA, VI = 4.5 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
12/53
mA
12
100
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Table 8. LF25AB (automotive grade) electrical characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 4.5 V, Ta = 25 C
2.475
2.5
2.525
IO = 50 mA, VI = 4.5 V
2.435
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 3.5 to 16 V, IO = 5 mA
15
mV
VO
Load regulation
VI = 3.8 V, IO = 5 to 500 mA
15
mV
VI = 3.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
V
2.565
16
VI = 3.8 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
65
IO = 5 mA, VI = 4.5 1 V
Ta = 25 C
mA
12
120
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 6 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
13/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 4.5 V
2.45
2.5
2.55
IO = 50 mA, VI = 4.5 V, Ta = -25 to 85 C
2.4
Unit
V
2.6
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 3.5 to 16 V, IO = 5 mA
12
mV
VO
Load regulation
VI = 3.8 V, IO = 5 to 500 mA
12
mV
VI = 3.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
VI = 3.8 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
65
IO = 5 mA, VI = 4.5 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
14/53
mA
12
100
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 4.5 V, Ta = 25 C
2.45
2.5
2.55
IO = 50 mA, VI = 4.5 V
2.385
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 3.5 to 16 V, IO = 5 mA
15
mV
VO
Load regulation
VI = 3.8 V, IO = 5 to 500 mA
15
mV
VI = 3.5 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
V
2.615
16
VI = 3.8 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
82
f = 1 kHz
77
f = 10 kHz
65
IO = 5 mA, VI = 4.5 1 V
Ta = 25 C
mA
12
120
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 6 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
15/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 5.3 V
3.267
3.3
3.333
IO = 50 mA, VI = 5.3 V, Ta = -25 to 85 C
3.234
Unit
V
3.366
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 4.3 to 16 V, IO = 5 mA
16
mV
VO
Load regulation
VI = 4.6 V, IO = 5 to 500 mA
16
mV
VI = 4.3 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
VI = 4.6 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
80
f = 1 kHz
75
f = 10 kHz
65
IO = 5 mA, VI = 5.3 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
16/53
mA
12
100
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 5.3 V
3.234
3.3
3.366
IO = 50 mA, VI = 5.3 V, Ta = -25 to 85 C
3.168
Unit
V
3.432
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 4.3 to 16 V, IO = 5 mA
16
mV
VO
Load regulation
VI = 4.6 V, IO = 5 to 500 mA
16
mV
VI = 4.3 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
VI = 4.6 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
80
f = 1 kHz
75
f = 10 kHz
65
IO = 5 mA, VI = 5.3 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
100
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
17/53
53
LFXX
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 5.3 V, Ta = 25 C
3.234
3.3
3.366
IO = 50 mA, VI = 5.3 V,
3.153
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 4.3 to 16 V, IO = 5 mA
19
mV
VO
Load regulation
VI = 4.6 V, IO = 5 to 500 mA
19
mV
VI = 4.3 to 16 V, IO = 0 mA
0.5
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
18/53
V
3.447
16
VI = 4.6 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
80
f = 1 kHz
75
f = 10 kHz
65
IO = 5 mA, VI = 5.3 1 V
Ta = 25 C
mA
12
120
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 6 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 7 V
4.95
5.05
IO = 50 mA, VI = 7 V, Ta = -25 to 85 C
4.9
Unit
V
5.1
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 6 to 16 V, IO = 5 mA
25
mV
VO
Load regulation
VI = 6.3 V, IO = 5 to 500 mA
25
mV
0.5
VI = 6 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 6.3 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
76
f = 1 kHz
71
f = 10 kHz
60
IO = 5 mA, VI = 7 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
100
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
19/53
53
LFXX
Table 15. LF50AB (automotive grade) electrical characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 7 V, Ta = 25 C
4.95
5.05
IO = 50 mA, VI = 7 V
4.885
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 6 to 16 V, IO = 5 mA
28
mV
VO
Load regulation
VI = 6.3 V, IO = 5 to 500 mA
28
mV
0.5
V
16
VI = 6 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
20/53
5.115
VI = 6.3 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
76
f = 1 kHz
71
f = 10 kHz
60
IO = 5 mA, VI = 7 1 V
Ta = 25 C
mA
12
120
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 6 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 7 V
4.9
5.1
IO = 50 mA, VI = 7 V, Ta = -25 to 85 C
4.8
Unit
V
5.2
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 6 to 16 V, IO = 5 mA
25
mV
VO
Load regulation
VI = 6.3 V, IO = 5 to 500 mA
25
mV
0.5
VI = 6 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 6.3 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
76
f = 1 kHz
71
f = 10 kHz
60
IO = 5 mA, VI = 7 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 6 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
100
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
21/53
53
LFXX
Symbol
Parameter
Test conditions
IO = 50 mA, VI = 7 V, Ta = 25 C
Min.
Typ.
Max.
4.9
5.1
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 6 to 16 V, IO = 5 mA
28
mV
VO
Load regulation
VI = 6.3 V, IO = 5 to 500 mA
28
mV
0.5
IO = 50 mA, VI = 7 V
V
4.785
16
VI = 6 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
22/53
5.215
VI = 6.3 to 16 V,
IO = 500 mA
ON mode
VI = 6 V
OFF mode
50
f = 120 Hz
76
f = 1 kHz
71
f = 10 kHz
60
IO = 5 mA, VI = 7 1 V
Ta = 25 C
mA
12
120
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 6 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 8 V
5.94
6.06
IO = 50 mA, VI = 8 V, Ta = -25 to 85 C
5.88
Unit
V
6.12
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 7 to 16 V, IO = 5 mA
30
mV
VO
Load regulation
VI = 7.3 V, IO = 5 to 500 mA
30
mV
0.7
1.5
VI = 7 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 7.3 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
75
f = 1 kHz
70
f = 10 kHz
60
IO = 5 mA, VI = 8 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 9 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
23/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 8 V
5.88
6.12
IO = 50 mA, VI = 8 V, Ta = -25 to 85 C
5.76
Unit
V
6.24
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 7 to 16 V, IO = 5 mA
30
mV
VO
Load regulation
VI = 7.3 V, IO = 5 to 500 mA
30
mV
0.7
1.5
VI = 7 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 7.3 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
75
f = 1 kHz
70
f = 10 kHz
60
IO = 5 mA, VI = 8 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 9 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
24/53
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 10 V
7.92
8.08
IO = 50 mA, VI = 10 V, Ta = -25 to 85 C
7.84
Unit
V
8.16
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 9 to 16 V, IO = 5 mA
40
mV
VO
Load regulation
VI = 9.3 V, IO = 5 to 500 mA
40
mV
0.7
1.5
VI = 9 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 9.3 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
72
f = 1 kHz
67
f = 10 kHz
57
IO = 5 mA, VI = 10 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 9 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
25/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 10 V
7.84
8.16
IO = 50 mA, VI = 10 V, Ta = -25 to 85 C
7.68
Unit
V
8.32
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 9 to 16 V, IO = 5 mA
40
mV
VO
Load regulation
VI = 9.3 V, IO = 5 to 500 mA
40
mV
0.7
1.5
VI = 9 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 9.3 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
72
f = 1 kHz
67
f = 10 kHz
57
IO = 5 mA, VI = 10 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 9 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
26/53
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 10 V, Ta = 25 C
7.84
8.16
IO = 50 mA, VI = 10 V
7.665
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 9 to 16 V, IO = 5 mA
44
mV
VO
Load regulation
VI = 9.3 V, IO = 5 to 500 mA
44
mV
0.7
2.5
V
16
VI = 9 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
8.335
VI = 9.3 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
72
f = 1 kHz
67
f = 10 kHz
57
IO = 5 mA, VI = 10 1 V
Ta = 25 C
mA
12
160
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 9 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
27/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 10.5 V
8.415
8.5
8.585
IO = 50 mA, VI = 10.5 V, Ta = -25 to 85 C
8.33
Unit
V
8.67
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 9.5 to 16 V, IO = 5 mA
42
mV
VO
Load regulation
VI = 9.8 V, IO = 5 to 500 mA
42
mV
VI = 9.5 to 16 V, IO = 0 mA
0.7
1.5
Id
SVR
Quiescent current
VI = 9.8 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
72
f = 1 kHz
67
f = 10 kHz
57
IO = 5 mA, VI = 10.5 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 9 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
28/53
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 10.5 V
8.33
8.5
8.67
IO = 50 mA, VI = 10.5 V, Ta = -25 to 85 C
8.16
Unit
V
8.84
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 9.5 to 16 V, IO = 5 mA
42
mV
VO
Load regulation
VI = 9.8 V, IO = 5 to 500 mA
42
mV
VI = 9.5 to 16 V, IO = 0 mA
0.7
1.5
Id
SVR
Quiescent current
VI = 9.8 to 16 V,
IO= 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
72
f = 1 kHz
67
f = 10 kHz
57
IO = 5 mA, VI = 10.5 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 9 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
29/53
53
LFXX
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 10.5 V, Ta = 25 C
8.33
8.5
8.67
IO = 50 mA, VI = 10.5 V
8.145
Unit
VO
Output voltage
VI
IO = 500 mA
IO
Ta = 25 C
VO
Line regulation
VI = 9.5 to 16 V, IO = 5 mA
44
mV
VO
Load regulation
VI = 9.8 V, IO = 5 to 500 mA
44
mV
VI = 9.5 to 16 V, IO = 0 mA
0.7
2.5
Id
SVR
Quiescent current
eN
Vd
Dropout voltage
VIL
VIH
II
CO
30/53
V
8.855
16
VI = 9.8 to 16 V,
IO = 500 mA
ON mode
VI = 9 V
OFF mode
70
f = 120 Hz
72
f = 1 kHz
67
f = 10 kHz
57
IO = 5 mA, VI = 10.5 1 V
Ta = 25 C
mA
12
160
50
IO = 200 mA
0.2
1.3
IO = 500 mA
0.4
1.3
V
V
0.8
VI = 9 V, VC = 6 V, Ta = 25 C
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
dB
B = 10 Hz to 100 kHz, Ta = 25 C
DocID2574 Rev 28
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 11 V
8.82
9.18
IO = 50 mA, VI = 11 V, Ta = -25 to 85 C
8.64
Unit
V
9.36
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 10 to 16 V, IO = 5 mA
45
mV
VO
Load regulation
VI = 10.3 V, IO = 5 to 500 mA
45
mV
0.7
1.5
VI = 10 to 16 V, IO = 0 mA
Id
SVR
Quiescent current
VI = 10.3 to 16V,
IO = 500 mA
ON mode
VI = 10 V
OFF mode
70
f = 120 Hz
71
f = 1 kHz
66
f = 10 kHz
56
IO = 5 mA, VI = 11 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 10 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
31/53
53
LFXX

Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 15 V
11.88
12
12.12
IO = 50 mA, VI = 15 V, Ta = -25 to 85 C
11.76
Unit
V
12.24
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 13 to 16 V, IO = 5 mA
12
60
mV
VO
Load regulation
VI = 13.3 V, IO = 5 to 500 mA
12
60
mV
VI = 13 to 16 V, IO = 0 mA
0.7
1.5
Id
SVR
Quiescent current
VI = 13.3 to 16 V,
IO = 500 mA
ON mode
VI = 13 V
OFF mode
70
f = 120 Hz
69
f = 1 kHz
64
f = 10 kHz
54
IO = 5 mA, VI = 14 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 13 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
32/53
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
LFXX
Symbol
Parameter
VO
Output voltage
VI
IO
Test conditions
Min.
Typ.
Max.
IO = 50 mA, VI = 14 V
11.76
12
12.24
IO = 50 mA, VI = 14 V, Ta = -25 to 85 C
11.52
Unit
V
12.48
IO = 500 mA
16
1
V
A
VO
Line regulation
VI = 13 to 16 V, IO = 5 mA
12
60
mV
VO
Load regulation
VI = 13.3 V, IO = 5 to 500 mA
12
60
mV
VI = 13 to 16 V, IO = 0 mA
0.7
1.5
Id
SVR
Quiescent current
VI = 13.3 to 16 V,
IO = 500 mA
ON mode
VI = 13 V
OFF mode
70
f = 120 Hz
69
f = 1 kHz
64
f = 10 kHz
54
IO = 5 mA, VI = 14 1 V
eN
Vd
Dropout voltage
VIL
Ta = -40 to 125 C
VIH
Ta = -40 to 125 C
VI = 13 V, VC = 6 V
Output bypass
capacitance
ESR = 0.1 to 10 , IO = 0 to 500 mA
II
CO
mA
12
140
dB
50
IO = 200 mA
0.2
0.35
IO = 500 mA
0.4
0.7
DocID2574 Rev 28
V
V
0.8
V
V
10
10
33/53
53
Typical performance characteristics
LFXX

Figure 4. Dropout voltage vs. output current
Figure 5. Dropout voltage vs. temperature
Figure 6. upply current vs. input voltage
Figure 7. Supply current vs. input voltage

(no load)
Figure 8. Short-circuit current vs. input voltage
Figure 9. Supply current vs. temperature
Note:
34/53
Unless otherwise specified VO(NOM) = 3.3 V

DocID2574 Rev 28
LFXX

Figure 10. Logic-controlled precision 3.3/5.0 V selectable output
Figure 11. Sequential multi-output supply
DocID2574 Rev 28
35/53
53
LFXX
Figure 12. Multiple supply with ON/OFF toggle switch
Figure 13. Basic inhibit functions

LFXX
LFXX
LFXX
LFXX
36/53
DocID2574 Rev 28
LFXX

Figure 14. Delayed turn-on
LFXX
Figure 15. Low voltage bulb blinker
DocID2574 Rev 28
37/53
53
Package information
LFXX
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
38/53
DocID2574 Rev 28
LFXX
6.1
Package information
TO-220 package information

Figure 16. TO-220 (STD-ST dual gauge) package outline
0015988_S
DocID2574 Rev 28
39/53
53
Package information
LFXX
Figure 17. TO-220 (STD-ST single gauge) package outline
40/53
DocID2574 Rev 28
LFXX
Package information
Table 29. TO-220 mechanical data

Type STD - ST dual gauge
Type STD - ST single gauge
mm
mm
Dim.
Min.
Max.
Min.
Typ.
Max.
4.40
4.60
4.40
4.60
0.61
0.88
0.61
0.88
b1
1.14
1.70
1.14
1.70
0.48
0.70
0.48
0.70
15.25
15.75
15.25
15.75
D1
Note:
Typ.
1.27
10.00
10.40
10.00
10.40
2.40
2.70
2.40
2.70
e1
4.95
5.15
4.95
5.15
1.23
1.32
0.51
0.60
H1
6.20
6.60
6.20
6.60
J1
2.40
2.72
2.40
2.72
13.00
14.00
13.00
14.00
L1
3.50
3.93
3.50
3.93
L20
16.40
16.40
L30
28.90
28.90
3.75
3.85
3.75
3.85
2.65
2.95
2.65
2.95
Despite of some differences in tolerances, packages are compatible
DocID2574 Rev 28
41/53
53
Package information
LFXX
Figure 18. TO-220FP package outline
7012510_Rev_K_B
42/53
DocID2574 Rev 28
LFXX
Package information
Table 30. TO-220FP mechanical data

mm
Dim.
Min.
Typ.
Max.
4.4
4.6
2.5
2.7
2.5
2.75
0.45
0.7
0.75
F1
1.15
1.70
F2
1.15
1.70
4.95
5.2
G1
2.4
2.7
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9.3
Dia
3.2
DocID2574 Rev 28
43/53
53
Package information
6.2
LFXX
TO-220 packing information

Figure 19. TO-220 dual gauge tube outline (dimensions in mm)
Figure 20. TO-220 single gauge tube outline(dimensions in mm)
44/53
DocID2574 Rev 28
LFXX
6.3
Package information
DPAK package information

Figure 21. DPAK package outline
0068772_M_type_A
DocID2574 Rev 28
45/53
53
Package information
LFXX
Table 31. DPAK mechanical data

mm
Dim.
Min.
Typ.
Max.
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
0.64
0.90
b4
5.20
5.40
0.45
0.60
c2
0.48
0.60
6.00
6.20
D1
5.10
6.40
6.60
E1
4.70
2.28
e1
4.40
4.60
9.35
10.10
1.00
1.50
(L1)
2.80
L2
0.80
L4
0.60
1.00
0.20
V2
Figure 22. DPAK recommended footprint

6.7
1.8
1.6
2.3
6.7
2.3
1.6
46/53
DocID2574 Rev 28
AM08850v1
LFXX
6.4
Package information
PPAK package information

Figure 23. PPAK package outline
0078180_F
DocID2574 Rev 28
47/53
53
Package information
LFXX
Table 32. PPAK mechanical data

mm
Dim.
Min.
Max.
2.2
2.4
A1
0.9
1.1
A2
0.03
0.23
0.4
0.6
B2
5.2
5.4
0.45
0.6
C2
0.48
0.6
6.2
D1
E
5.1
6.4
6.6
E1
4.7
1.27
4.9
5.25
G1
2.38
2.7
9.35
L2
10.1
0.8
L4
0.6
L5
1
2.8
0.20
0
DocID2574 Rev 28
1
1
L6
V2
48/53
Typ.
LFXX
6.5
Package information
DPAK and PPAK packing information

Figure 24. DPAK and PPAK tape outline
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
E
F
B1
K0
For machine ref. only

including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
Bending radius
User direction of feed
AM08852v1
DocID2574 Rev 28
49/53
53
Package information
LFXX
Figure 25. DPAK and PPAK reel outline
T
REEL DIMENSIONS
40mm min.
Access hole
At sl ot location
B
D
C
Full radius
G measured at hub
Tape slot
in core for
tape start 25 mm min.
width
AM08851v2
Table 33. DPAK and PPAK tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
6.8
B0
10.4
10.6
1.5
12.1
12.8
1.6
20.2
16.4
50
B1
50/53
Min.
Max.
330
13.2
1.5
D1
1.5
1.65
1.85
7.4
7.6
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
40
0.25
0.35
15.7
16.3
DocID2574 Rev 28
18.4
22.4
LFXX
Ordering information
Ordering information
Table 34. Order code
Packages
TO-220
TO-220
(dual gauge)
TO-220FP
DPAK (tape and reel)
PPAK (tape and reel)
LF15ABDT-TR
LF18CDT-TR
1.5 V
LF18CPT-TR
LF18CDT-TRY(1)
LF33CV
LF33CV-DG
Output
voltages
1.8 V
1.8 V
LF18ABDT-TR
LF18ABPT-TR
1.8 V
LF25CDT-TR
LF25CPT-TR
2.5 V
LF25CDT-TRY(1)
2.5 V
LF25ABDT-TR
2.5 V
LF25ABDT-TRY(1)
2.5 V
LF33CDT-TR
LF33CPT-TR
3.3 V
LF33CDT-TRY(1)
LF33CPT-TRY(1)
3.3 V
LF33ABV
LF33ABV-DG
LF33ABDT-TR
LF50CV
LF50CV-DG
LF50CDT-TR
LF50CPT-TR
5V
LF50CDT-TRY(1)
LF50CPT-TRY(1)
5V
LF50ABDT-TR
LF50ABPT-TR
5V
LF50ABV
LF50ABV-DG
LF50ABP
3.3 V
LF50ABDT-TRY(1)
5V
LF60CV
LF60CDT-TR
6V
LF60ABV
LF60ABDT-TR
6V
LF80CDT-TR
8V
LF80CDT-TRY(1)
8V
LF80ABDT-TR
8V
LF85CDT-TR
LF85CDT-TRY(1)
LF90CV
LF120ABV
LF85CPT-TR
LF85CPT-TRY
(1)
LF90CPT-TR
8.5 V
8.5 V
9V
LF120CDT-TR
12 V
LF120ABDT-TR
12 V
1. Automotive grade products.
DocID2574 Rev 28
51/53
53
Revision history
LFXX
Revision history
Table 35. Document revision history
Date
Revision
21-Jun-2004
14
Document updating.
24-May-2006
15
Order codes updated.
02-Apr-2007
16
14-May-2007
17
26-Jul-2007
18
Add table 1 in cover page.
26-Nov-2007
19
Modified: Table 34.
16-Jan-2008
20
Added new order codes for automotive grade products see Table 34 on
page 51.
12-Feb-2008
21
Modified: Table 34 on page 51.
10-Jul-2008
22
Modified: Table 34 on page 51.
05-May-2010
23
Added: Table 29 on page 41, fig 16, fig 17, fig 18 and fig 19.
16-Nov-2010
24
Modified: RthJC value for TO-220 Table 2 on page 7.
10-Feb-2012
25
Added: order code LF33CV-DG and LF33ABV-DG Table 34 on page 51.
09-Mar-2012
26
Added: order code LF50ABV-DG Table 34 on page 51.
28-Feb-2014
27
Changed the part numbers LFxxAB and LFxxC to LFXX.

Changed the title.
Removed table from cover page.
Removed PENTAWATT package from the figure in cover page, the Description
and Figure 2.
Updated the Description.
Updated: Table 2, Table 6, Table 8, Table 10, Table 13, Table 15, Table 17,
Table 22,Table 25 and Table 34.
Changed title of Figure 7.
Updated mechanical data.
03-Mar-2015
28
Updated Table 34: Order code.

Minor text changes.
52/53
Changes
DocID2574 Rev 28
LFXX
IMPORTANT NOTICE PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (ST) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to STs terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
2015 STMicroelectronics All rights reserved
DocID2574 Rev 28
53/53
53

LFXX Datasheet

Uploaded by

Copyright:

Available Formats

LFXX Datasheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LFXX Datasheet

Uploaded by

Copyright:

Available Formats

LFXX

Very low drop voltage regulator with inhibit function

The LFXX is a very low drop regulator available in

Internal current and thermal limit

Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

TO-220 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

TO-220 packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

DPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

PPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

DPAK and PPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

TAB is electrically connected to GND on TO-220, PPAK and DPAK packages

1. For 18 < VI < 40 the regulator is in shutdown.

Table 2. Thermal data

Thermal resistance junction-case

Thermal resistance junction-ambient

Figure 3. Test circuit

Operating input voltage

Output current limit

IO = 50 mA, VI = 3.5 V, Ta = -25 to 85 C

Supply voltage rejection

Output noise voltage

Control input logic low

Control input logic high

Control input current

ESR = 0.1 to 10 , IO = 0 to 500 mA

Operating input voltage

Output current limit

IO = 50 mA, VI = 3.3 V, Ta = -25 to 85 C

Supply voltage rejection

Output noise voltage

Control input logic low

Control input logic high

Control input current

ESR = 0.1 to 10 , IO = 0 to 500 mA

Refer to test circuits, TJ = 25 C, CI = 0.1 F, CO = 2.2 F unless otherwise specified.

Operating input voltage

Output current limit

IO = 50 mA, VI = 3.5 V, Ta = -25 to 85 C

Supply voltage rejection

Output noise voltage

Control input logic low

Control input logic high

Control input current

ESR = 0.1 to 10 , IO = 0 to 500 mA

Operating input voltage

Output current limit

Supply voltage rejection

Output noise voltage

Control input logic low

Control input logic high

Control input current

ESR = 0.1 to 10 , IO = 0 to 500 mA

Refer to test circuits, TJ = 25 C, CI = 0.1 F, CO = 2.2 F unless otherwise specified.

Operating input voltage

Output current limit

IO = 50 mA, VI = 4.5 V, Ta = -25 to 85 C

Supply voltage rejection

Output noise voltage

Control input logic low