Lab 4

Lab Instructions
Lab 4, due 5:30 pm October 1, 2007

EES5053/ES4093: Remote Sensing, UTSA
Student Name: ___________________
Digital Image Processing I: Atmospheric Correction, Radiance,

Reflectance, NDVI from Landsat Image
Objective: In this lab, you will learn the basic procedure of digital image
processing from converting the digital number to radiance, and then to
reflectance by using band math. Based on reflectance, you will learn how
to calculate the NDVI, and classify the NDVI using Density slice.
Part I: Concepts and short questions:

1. Give a four bands image of 4 x 3 as the following, please replace them into BSQ,
BIP, and BIL formats.
1, 4, 5, 6
3, 4, 4, 5
2, 3, 9, 10
2, 5, 8, 9
10, 3, 2, 1
9, 8, 7, 6
105, 79, 103, 114

114, 100, 124, 134
130, 125, 109, 150
20, 25, 31, 26

29, 19, 29, 50
25, 30, 33, 50
2. Calculate the two multivariate parameters (covariance and correlation) of the

above 4 bands. Identify which two bands have the best correlation.
3. Summarize the differences and similarities of supervised and unsupervised
classifications. You may use examples to illustrate them.
4. Assume that two road intersections shown on a photograph can be located on a
1:25,000 scale topographic map. The measured distance between the intersections
is 47.2 mm on the map and 94.3 mm on the photograph. (a) What is the scale of
the photograph? (b) at that scale, what is the length of a fence line that measures
42.9 mm on the photograph?
5. The area of a lake is 52.2 cm2 on a 1:7500 vertical photograph. find the ground
area of the lake in m2, ha, and acres
Part II
1. Preparation:
(1). Create a Lab4 directory under c:\Fall2007-RS\YourName\. Today we will use the
atmospherically corrected image (with mask applied) that you processed in Lab3:
Mask_DOS_020708.tif. Save your results to Lab4 directory.
2. Spectra radiance calculation
Equation 1 is the basic equation for calculating spectral radiance from the Digital
Number (DN) of Landsat 4, 5 and 7:
LMAX LMIN
* ( DN QCALMIN ) LMIN
L
QCALMAX
QCALMIN
(1)
where, DN is the Digital Number of each pixel in the image (in this lab, it will be
Mask_DOS_020708.tif, although a simple DOS atmospheric correction has been performed, it is
still DN, not radiance yet), LMAX and LMIN are the calibration constants, and
QCALMAX and QCALMIN are the highest and the lowest points of the range of
rescaled radiance in DN.
For Landsat 7, However, there is a more simple way for calculating L (Landsat 7
Science User Data Handbook Chap.11, 2002). This is what we will use in this lab.
L gain * DN offset
(2)
In Equation 2, the gain corresponds to the Gain in the header file, and the offset
corresponds to the Bias in the header file. The unit of radiance is W m-2 sr-1 um-1
The image NE_p27r40_020708_12347.tif you worked on in Lab 3 was just a portion
(or a subscene) of the original full image of LE70270400000218950. This image can be
downloaded free from the TexasView Remote Sensing Consortium that UTSA (LRSG) is
the member of the Consortium. From the LRSG website (www.utsa.edu/LRGS/), there is
a link to the website. Now I would like you to explore this website (there are many cool
stuff for you to explore) and to know how you may download data from there for your
own research. Also you can see the header file information you need for this lab. When
are in the TexasView website, click Landsat Data under Data Archives on the left hand
column. Now you should a figure like this:
This is the available Landsat 7 images for the Texas and its adjacent states. You
can see the Path (east to west) from 24-33 and Row (north to south) from 35-42. Path
tells you each satellite orbit, row tells the descending or ascending of the orbits.
Question1, from this figure, is Landsat 7 a descending or ascending satellite for
the day time passing Texas (usually 10:00 am). What is descending or ascending?
Path and Row together define the one Landsat image. For San Antonio, it is
Path27, Row40 or 2740 in the image. Click the 2740 in the image, you will see there are
4 years of images available for San Antonio: y1999, y2001, y2002, y2003. The image we
are using is in July 8, 2002. Click y2002, you will see three images in different days
(Julie day): d189, d317, d365). The Julie Day for July 8, 2002 is the day 189. so click
189. you will see two different types of images. What we want to use is the nlaps. Click
the nlaps, you will see the many image files there: the same file name with different file
extension. H1, H2, H3, HI are header files; I1, I2, , I9 are real images. To understand
what they mean, please click the README.TXT file. I would encourage you to
understand all of them using your spare time, since it is the first step for you to really get
familiar with a satellite sensor and what many parameters mean. If you have any
question about them, you are always welcomed to ask me.
You should be able to find the gain and offset information from those files for the
Lab. But to save your time, I list them for you to use.
Band | Ref
DN to Radiance
Default
| Detector
gain
offset
Abs Calib?
------------------------------------------------------1
|
15
0.775686
-6.20000
FALSE
2
|
12
0.795686
-6.39999
FALSE
3
|
8
0.619216
-5.00000
FALSE
4
|
7
0.965490
-5.10001
FALSE
5
|
14
0.125725
-0.99999
FALSE
6
|
8
0.066823
0.000000
FALSE
7
8
9
|
|
|
10
27
8
0.043726
0.971765
0.037059
-0.35000
-4.70000
3.200000
FALSE
FALSE
FALSE
In this lab, we only do band 3 and band 4. You can use the Band Math tool to do so.
From the main ENVI menu, click Basic Tools -> Band Math, type the equation for band
3 as the figure 1 below, and click OK. A new window will popup, select the atmospheric
corrected band 3 (Mask_DOS_020708.tif) as b3, then save this image to your directory. In
the similar way, you can do the band 4. Output as Radn_189_b3.tif and Radn_189_b4.tif
Figure 1. Band math expressions

Question 2, calculate and show the basic statistics of the two radiance images, and give a brief
analysis of the statistics.
3. Spectra reflectance calculation

The reflectance for band is computed by the following equation (Markham and
Barker,1986 and Landsat 7 Science User Data Handbook Chap.11, 2002):
L d 2

ESUN cos
(3)
where L is at satellite spectral radiance which is the outgoing radiation energy of the
band observed at the top of atmosphere by the satellite (in this lab, we use the results
calculated from step 3), d is the Earth-Sun distance in astronomical units (), ESUN is
mean solar exoatmospheric irradiances for the band , and cos is the cosine of the
solar incident angle. Supposing a horizontal land surface is flat, the cosine of solar
incident angle (cos) can be calculated from the Sun Elevation cos(90-SunElevation).
The Sun elevation angle for the image is 65.26 (you can get this from the head file of
LE7027040000218950.H1 mentioned above)
Since the inverse of d2 (which is 1/d2) in Equation 3 is equivalent to inverse squared
relative distance Earth-Sun, dr, the Equation 3 can be rewritten as:
L
ESUN cos d r
(4)
The annual averaged value of dr is 1.0, and it ranges from about 0.97 to 1.03. You can
find a real number for a special date (such as the189 day: July 8 for this image used is
1.0167)
from
Table
11.4
of
this
link
here
at:
http://ltpwww.gsfc.nasa.gov/IAS/handbook/handbook_htmls/chapter11/chapter11.html
The values for ESUN in Equation 4 are given in Table 3. The value of ESUN for band 6
is not available.
Table 3. ESUN for Landsat 4 and 5 TM in mW/cm 2/m (Markham and Barker, 1986),
and for Landsat 7 ETM+ in W/m2/m (Landsat 7 Science User Data Handbook Chap.11,
2002)
Landsat-4 TM
Landsat-5 TM
Landsat 7 ETM+
Band1
195.8
195.7
1969
Band2
182.8
182.9
1840
Band3
155.9
155.7
1551
Band4
104.5
104.7
1044
Band5
21.91
21.93
225.7
Band6
-
Band7
7.457
7.452
82.07
In this lab, we only calculate the reflectance of band 3 and band 4, using the Band
Math tool as in step 2, output as Reflt_189_b3 and Reflt_189_b4.
Question 3. Calculate and compare the basic statistics of reflectance Band 3 and 4 .
4. Calculate NDVI
NDVI stands normalized difference of vegetation index: the difference between the near
infrared band (~0.83 m) and the red band (0.66 m). For Landsat image (TM or ETM+
image), they are band 4 and band 3, respectively. Thus, the NDVI can be calculated based
on this equation: (b4-b3)/(b4+b3), using the reflectance band 3 and band 4 as input, name
as NDVI_02189.
Question 4. Show the basic statistics of NDVI.
5. Density Slice
In the image window, click Overlay->Density Slice. In the density slice window, select
one of the item, then edit the data range and color, click apply. Then click file->Save
Range to your folder as NDVI_class.
Question 5. Upload an image as RGB742, link it with NDVI Density Slice (gray).
Please make a simple discussion/comparison about the spatial distribution of the NDVI
values (you can edit the range of NDVI to match the RGB) and vegetation coverage.

Lab 4

Uploaded by

Copyright:

Available Formats

Lab 4

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lab 4

Uploaded by

Copyright:

Available Formats

Lab Instructions

Lab 4, due 5:30 pm October 1, 2007

Digital Image Processing I: Atmospheric Correction, Radiance,

Part I: Concepts and short questions:

105, 79, 103, 114

20, 25, 31, 26

2. Calculate the two multivariate parameters (covariance and correlation) of the

Figure 1. Band math expressions

3. Spectra reflectance calculation

You might also like