BCM 200

BREAKER
CONDITION
MONITOR
Compact and affordable, the ideal breaker monitor
C O M PA N Y O V E R V I E W
A low cost condition monitoring system
With over 30 years experience,
Hathaway is a market leader in the for circuit breakers
development of instrumentation to
address the specific needs of power
BCM 200
utilities throughout the world. A permanently installed monitoring system for implementation of condition based
maintenance programs.
Our areas of expertise include:

■ Fault / Event Recording This compact monitor features:

■ Power Quality Recording ■ Design that easily fits into breaker
control cabinets
■ Fault Locating
■ Analysis performed on every breaker
■ Circuit Breaker Testing operation
■ Automatic “fingerprint” comparison of
■ Circuit Breaker Condition
breaker characteristics
Monitoring
■ Accumulated fault current arcing time (e.g., I²t)
■ Remote Terminal Units, calculated for each pole
■ Alarms activated when maximum contact duty
Distribution Automation and
exceeded or breaker characteristic changes
SCADA Systems
■ Local and remote communications
The Manufacturing Division has ■ Powerful Windows based communications and
analysis software
been accredited to ISO 9001 which
■ Manufactured to BS EN ISO 9001
underlines the company's
commitment to produce quality The system can acquire the following
products for a global market. information:
Our expertise, experience and ■ Auxiliary contact opening and closing times

versatility allow us to introduce a ■ Auxiliary contact bouncing times

■ Open and close coil current profiles
high degree of systems flexibility.
■ Mechanism operating speed
This has resulted in the development
■ Maximum and minimum battery voltage
of the BCM 200 Breaker Condition ■ Battery charger ripple
Monitor. ■ 3 phase fault currents

The BCM 200 - a low cost test ■ Restrike detection

system providing accurate

Since the BCM 200 records the current interrupted by every
information on the day-to-day breaker trip, it can provide fault monitoring information on
condition of all types of breaker. distribution systems where there are generally no other fault
recording devices installed. The records obtained can thus
be used to determine the magnitude and duration of
Replay ™97 is a trademark of Hathaway Systems Limited. faults, detect recurring faults and monitor protection
All other trademarks and registered trademarks are properties of their respective companies

and are hereby acknowledged. performance.

The BCM 200, unbeatable performance and price . . . from the world leader
TECHNICAL OVERVIEW Record summaries are also stored in a Microsoft Access TRIGGERING
database table providing open access to all recorded data. Change in any event state or detection of over- +Vdc
The BCM 200 is a microprocessor based condition
The BCM 200 has an expansion interface which allows current on any phase. Open
Switch
Close
Switch
monitoring system which provides diagnostic information
modules with additional analog and digital inputs to be
and can be fitted to both existing and new circuit breakers. PERFORMANCE Open Close
A B
fitted. These additional inputs can be configured to Coil Coil

After every breaker operation the BCM 200 performs a Operating voltage:
monitor gas density, mechanism travel, temperature,
“fingerprint” analysis by comparing recorded data to a 85 - 264Vac, 80 - 340Vdc. (25 - 80Vdc optional). Shunt Shunt
pressure, motor current, heater circuitry, etc.
reference record with programmable limits which are held Isolation:
The system has been designed for use in high voltage All inputs 2.5kVac channel to channel and channel
in memory. If any of the limits are exceeded, an alarm is
substations and is immune to the high levels of electrical to earth.
-Vdc

activated to indicate the characteristics of the breaker have

interference typically found in this environment. Fast transient: Supply Open Coil Open Close Coil Close Auxiliary
changed beyond those deemed to be acceptable. Voltage Current Initiation Current Initiation Switch
Input Signal
Input Signal Input Signal Input Signal Input Signal Input Signal
Class 4, 4kV IEC 255-22-4 (IEC 801-4).
Test records and summaries are stored within the BCM
S P E C I F I C AT I O N SWC:
200's internal memory and can be retrieved at a later date
INPUTS (1MHz damped sine wave). BCM 200 BREAKER CONDITION MONITOR
via direct computer link on site or remotely via modem. Up
Analog inputs: Common mode:- 2.5kV (IEC 255-22-1).
to 30 BCM 200s can be networked together in a substation
3 AC channels:- Differential mode:- 1.0kV (IEC 255-22-1). 3 Phase
where they can communicate through a single modem. Serial
Communications Current Inputs

Dedicated to measuring AC currents via split-core CTs. Impulse withstand:

Records and summaries can be downloaded from the BCM 3 Phase Currents

CT burden:- Common mode:- 5.0kV, 0.5J (IEC 255-5). from Protection

200 to Replay™97, a Windows based software package, Transformers

0.05VA Differential mode:- 5.0kV, 0.5J (IEC 255-5).

where they can be analyzed and archived. The software
3 DC channels:- Operating temperature range:
also includes a configuration program to allow local or
Dedicated to measuring the open and close coil currents -30 to +60ºC (-22 to +140ºF). Connections to the BCM 200
remote modification of BCM 200 parameters.
and station battery voltage. CONNECTIONS
Shunt resistance:- D ATA R E T R I E V A L
All breaker connections are terminated on a 6/32”
0.2S (5A), 0.1S (10A), 0.05S (20A). (4.76mm) terminal block. The BCM 200 has two serial ports - one RS232 port and
Analog accuracy: Expansion port: one RS485 port. The RS232 port can be used to connect
Better than 1%. Provides additional analog and event inputs and the BCM 200 directly to a PC, or via modem to a remote
Analog resolution: expansion memory up to 2Mb. PC, for configuration and data retrieval.
10 bits.
PHYSICAL DIMENSIONS The RS485 port can be used to provide multi-drop
Event inputs:
267mm (10.5”) x 130mm (5.12”) x 54mm (2.13”). communications, allowing multiple BCM 200s to be
Four event channels. Ranges; 20 - 60Vdc, 80 -
Weight: 2kg (4.5lbs). connected to a single modem or PC. When the RS485 port
150Vdc or 170 - 250Vdc with external resistor.
is used, one BCM 200 in the network can be designated as
Event accuracy: This specification may change due to our policy of continuous product development.

the master which will transmit time sync commands to the

1ms.
other BCM 200s.
C O N N E C T I O N A N D I N S TA L L AT I O N
OUTPUTS
Alarms: The BCM 200 has been designed to allow it to be easily
Analog Event Analog Event Analog Event
Two N/O relay contacts for BCM 200 Watchdog installed inside a breaker control cabinet. With an overall Inputs Inputs Alarms Inputs Inputs Alarms Inputs Inputs Alarms

and Breaker Condition Alarms. Contact; 1 Form size of 267mm (10.5”) x 130mm (5.12”) x 54mm (2.13”) it 6 4 2 6 4 2 6 4 2

A, 5A @ 30Vdc or 250Vac. can fit into the cabinets of most breakers.

RS232: The system can be programmed with all the information BCM 200 BCM 200 BCM 200

For communications to a PC or modem. relating to the breaker prior to installation, eliminating the RS232 RS485 RS232 RS485 RS232 RS485

RS485: need for a PC in the substation.

For networking up to 30 BCMs to a PC or modem. Connections are made as shown on the wiring schematic
and shunts are added in series with the operating coils to
RECORDING
allow coil current profiles to be recorded during an Modem or direct PC
2kHz sample rate. connection for comms
operation. Once installed, the BCM 200 can be pro- to all BCM 200s

MEMORY grammed with the reference fingerprints which are used to

256k (expandable to 2Mb). compare against future operations. Typical Installation
An advanced, intelligent monitor that provides analysis for all breaker types
S Y S T E M L AYO U T C O N F I G U R AT I O N A N D A N A LY S I S
SOFTWARE
Power Input - ranging
Replay™97 is a master station software package running on
from 80 - 340Vdc, 85 -
Windows 95 or Windows NT. It allows the automatic
Mounting Holes - the 264Vac.
retrieval of full records, record summaries and alarm data.
BCM 200 can be Station Battery Input -
The software also provides graphical manipulation of the
securely mounted onto 150 and 300Vdc
full record data including time and magnitude zoom and
a plate using the four ranges available.
the ability to overlay multiple records.
holes on the edge of the
PCB. Trip / Close Coil
Current Inputs -
connected directly
across shunts in the coil
circuits.

Status LEDs - flashes Phase Current Inputs -

green every two seconds Connected via split-core CONFIGURATION
to indicate that the CTs to the protection
Replay™97 also incorporates a configuration facility
system is healthy. current transformers.
for each supported Hathaway product.
This allows the configurable parameters to be edited,
transmitted and archived in a controlled and efficient
manner.

RS232 Comms LEDs - DEMONSTRATION DISK

flashes when communi- Easy file management with Replay 97 Explorer
™ A demonstration disk of the Replay™97 software is
cating through the Event Inputs - used to available on request.
RS232 port. trigger the BCM 200. DATA MANIPULATION Contact Hathaway for details.
Can be configured for Replay™97 also provides automatic alarm logging
trip initiate, close initiate, and reporting and can also be used with Hathaway’s
A and B contacts or complete range of circuit breaker testing and
RS232 - for local motor run-time. monitoring equipment.
connection to a PC or
modem. All data from these devices is stored in a Microsoft
Access database which provides a comprehensive
range of tools that can be used to manage, analyze
Relay Outputs - can be and present this data.
RS485 - for In
connected to an alarm Reports are provided that automatically highlight
networking up to
or SCADA system to breaker operations that are outside specification.
30 BCM 200s in
indicate a problem with
one location. Out COMMUNICATIONS
the breaker or BCM 200.
Replay™97 controls the communication between the
Earth Connection BCM 200 and a PC. It can be configured to
communicate either directly or remotely via modems.
I²t Reset - resets
Reset - allows the BCM Replay™97 can also be configured to automatically
accumulated fault
200 to be reset. Alarm poll each instrument at a defined time each day and
current.
Clear retrieve any new data that has been recorded. Display and Configure Records with the BCM Viewer
15 Wildflower Way 8228 Park Meadows Drive
Belfast Littleton
BT12 6TA Colorado 80124
Northern Ireland U.S.A.
Telephone: +44 1232 225200 Telephone: +1 303 799 8200
Fax: +44 1232 225225 Fax: +1 303 799 8880
Internet: www.hathaway-systems.com e-mail: [email protected]