Scribd Logo
Upload

Welcome to Scribd!

  • 648 views

    Aluminio 2024-T3

    Uploaded by

    Ibsonh
    Aluminum 2024-T3 is an aluminum alloy with good machinability and strength. It is commonly used in aircraft parts and other applications requiring high strength and light weight. The document provides detailed information on the composition, properties, and processing of Aluminum 2024-T3.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aluminio 2024-T3

    Uploaded by

    Ibsonh
    648 views2 pages
    Aluminum 2024-T3 is an aluminum alloy with good machinability and strength. It is commonly used in aircraft parts and other applications requiring high strength and light weight. The document provides detailed information on the composition, properties, and processing of Aluminum 2024-T3.

    Original Description:

    fsdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Aluminum 2024-T3 is an aluminum alloy with good machinability and strength. It is commonly used in aircraft parts and other applications requiring high strength and light weight. The document provides detailed information on the composition, properties, and processing of Aluminum 2024-T3.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    648 views2 pages

    Aluminio 2024-T3

    Uploaded by

    Ibsonh
    Aluminum 2024-T3 is an aluminum alloy with good machinability and strength. It is commonly used in aircraft parts and other applications requiring high strength and light weight. The document provides detailed information on the composition, properties, and processing of Aluminum 2024-T3.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Aluminum 2024-T3

    Categories:

    Metal; Nonferrous Metal; Aluminum Alloy; 2000 Series Aluminum Alloy

    Material
    Notes:

    General 2024 characteristics and uses (from Alcoa): Good machinability and surface finish capabilities. A high strength material of adequate workability. Has
    largely superceded 2017 for structural applications.
    Uses: Aircraft fittings, gears and shafts, bolts, clock parts, computer parts, couplings, fuse parts, hydraulic valve bodies, missile parts, munitions, nuts, pistons,
    rectifier parts, worm gears, fastening devices, veterinary and orthopedic equipment, structures.
    Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN.
    Composition Notes:
    A Zr + Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and
    the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which
    allow the Zr + Ti limit.
    Aluminum content reported is calculated as remainder.
    Composition information provided by the Aluminum Association and is not for design.

    Key Words:

    Aluminium 2024-T3; UNS A92024; ISO AlCu4Mg1; NF A-U4G1 (France); DIN AlCuMg2; AA2024-T3, ASME SB211; CSA CG42 (Canada)

    Vendors:

    Click here to view all available suppliers for this material.


    Please click here if you are a supplier and would like information on how to add your listing to this material.

    Physical Properties
    Density

    Mechanical Properties
    Hardness, Brinell
    Hardness, Knoop
    Hardness, Rockwell A
    Hardness, Rockwell B
    Hardness, Vickers
    Ultimate Tensile Strength
    Tensile Yield Strength
    Elongation at Break
    Modulus of Elasticity

    Metric
    2.78 g/cc

    English
    0.100 lb/in

    Comments
    AA; Typical

    Metric
    120
    150
    46.8
    75.0
    137
    483 MPa
    345 MPa
    18.0 %
    73.1 GPa

    English
    120
    150
    46.8
    75.0
    137
    70.0 ksi
    50.0 ksi
    18.0 %
    10600 ksi

    Notched Tensile Strength

    379 MPa

    55000 psi

    Comments
    AA; Typical; 500 g load; 10 mm ball
    Converted from Brinell Hardness Value
    Converted from Brinell Hardness Value
    Converted from Brinell Hardness Value
    Converted from Brinell Hardness Value
    AA; Typical
    AA; Typical
    AA; Typical; 1/16 in. (1.6 mm) Thickness
    AA; Typical; Average of tension and compression. Compression
    modulus is about 2% greater than tensile modulus.
    2.5 cm width x 0.16 cm thick side-notched specimen, K t = 17.

    Ultimate Bearing Strength


    Bearing Yield Strength
    Poissons Ratio
    Fatigue Strength

    855 MPa
    524 MPa
    0.330
    138 MPa

    124000 psi
    76000 psi
    0.330
    20000 psi

    @# of Cycles 5.00e+8

    @# of Cycles 5.00e+8

    70.0 %
    28.0 GPa
    283 MPa

    70.0 %
    4060 ksi
    41000 psi

    0-100 Scale of Aluminum Alloys

    Metric
    0.00000582 ohm-cm

    English
    0.00000582 ohm-cm

    Comments
    AA; Typical at 68F

    Metric
    23.2 m/m-C
    24.7 m/m-C
    0.875 J/g-C
    121 W/m-K
    502 - 638 C

    English
    12.9 in/in-F
    13.7 in/in-F
    0.209 BTU/lb-F
    840 BTU-in/hr-ft-F
    935 - 1180 F

    Comments
    AA; Typical; Average over 68-212F range.
    Average over the range 20-300C

    Machinability
    Shear Modulus
    Shear Strength

    Electrical Properties
    Electrical Resistivity

    Thermal Properties
    CTE, linear 68F
    CTE, linear 250C
    Specific Heat Capacity
    Thermal Conductivity
    Melting Point

    Solidus
    502 C
    Liquidus
    638 C

    Processing Properties
    Metric
    Annealing Temperature
    413 C
    Solution Temperature
    256 C

    Material Components Properties


    Metric
    Aluminum, Al
    90.7 - 94.7 %
    Chromium, Cr
    <= 0.100 %
    Copper, Cu
    3.80 - 4.90 %
    Iron, Fe
    <= 0.500 %
    Magnesium, Mg
    1.20 - 1.80 %
    Manganese, Mn
    0.300 - 0.900 %
    Other, each
    <= 0.0500 %
    Other, total
    <= 0.150 %
    MatWeb,
    /
    Silicon,
    Si Your Source for Materials Information - WWW.MATWEB.COM
    <= 0.500 %
    Titanium, Ti
    <= 0.150 %
    Zinc, Zn
    <= 0.250 %
    References for this datasheet.

    935 F
    1180 F

    Edge distance/pin diameter = 2.0


    Edge distance/pin diameter = 2.0
    completely reversed stress; RR Moore machine/specimen

    AA; Typical

    AA; Typical at 77F


    AA; Typical range based on typical composition for wrought products
    1/4 inch thickness or greater. Eutectic melting is not eliminated by
    homogenization.
    AA; Typical
    AA; Typical

    English
    775 F
    493 F

    Comments

    English
    90.7 - 94.7 %
    <= 0.100 %
    3.80 - 4.90 %
    <= 0.500 %
    1.20 - 1.80 %
    0.300 - 0.900 %
    <= 0.0500 %
    <= 0.150 %
    <= 0.500 %
    <= 0.150 %
    <= 0.250 %

    Comments

    Page 1 / 2

    Iron, Fe
    Magnesium, Mg
    Manganese, Mn
    Other, each
    Other, total
    Silicon, Si
    Titanium, Ti
    Zinc, Zn

    <= 0.500 %
    1.20 - 1.80 %
    0.300 - 0.900 %
    <= 0.0500 %
    <= 0.150 %
    <= 0.500 %
    <= 0.150 %
    <= 0.250 %

    <= 0.500 %
    1.20 - 1.80 %
    0.300 - 0.900 %
    <= 0.0500 %
    <= 0.150 %
    <= 0.500 %
    <= 0.150 %
    <= 0.250 %

    References for this datasheet.


    Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or
    engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your
    calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally
    entered into MatWeb.

    MA2024T3

    MatWeb, Your Source for Materials Information - WWW.MATWEB.COM /

    Page 2 / 2

    You might also like