Scribd
Upload
124 views3 pages

Compaq Presario CQ50-106AU Drivers For Windows XP

This document provides instructions for installing drivers in 3 steps for a Compaq Presario CQ50-106AU laptop running Windows XP. Step 1 lists 12 drivers that should be installed in the given order, including chipset, processor, display, audio, modem, and wireless drivers. Step 2 provides detailed instructions for manually installing the display driver. Step 3 provides instructions for manually installing the audio driver.

Uploaded by

yogu21
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
124 views3 pages

Compaq Presario CQ50-106AU Drivers For Windows XP

This document provides instructions for installing drivers in 3 steps for a Compaq Presario CQ50-106AU laptop running Windows XP. Step 1 lists 12 drivers that should be installed in the given order, including chipset, processor, display, audio, modem, and wireless drivers. Step 2 provides detailed instructions for manually installing the display driver. Step 3 provides instructions for manually installing the audio driver.

Uploaded by

yogu21
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Compaq Presario CQ50-106AU drivers for

Windows XP
September 9, 2008 — saysprasad

To successfully install the drivers in Compaq Presario CQ50-106AU Laptop with


Windows XP operating System

please follow these steps

I. Get the following drivers and install in the given order only.
——————————————————————————

01. Chipset drivers – nVidia nForce chipset driver & Networking controller.exe (117MB)

02. AMD Processor Update – sp35445 (3MB)

03. WinXPSP2 Enhancements – sp28668_Enh4WinXPSP2.exe (3.3MB)

04. VGA/Display – see the manual Installation step below

05. UAA Driver for HD Audio – sp33566_UAA Bus Driver for HD Audio.exe (54MB)

06. Audio/Sound – download CQ50-106AU audio driver (3MB) (see help below to see
how to install)

07. Modem – sp33839_Modem with SmartCP.exe(6MB)

08. Wireless – Wireless_Atheros.zip (2.2MB), sp34510_HP Wireless Assistant.exe


(3.2MB)

09. Webcam – sp35414_HP 1.3MP Webcam Software Drivers.exe (5MB)

10. Dotnetfx2.0 – dotnetfx_2.0.exe (22MB)

11. Touchpad – Synaptics Touchpad.exe (6MB)

12. Quick launch – Quick launch buttons.exe (14MB)

——————————————————————–
I. Manual Installation Help for (04. VGA/Display)
——————————————————————–
1. Click START
2. Click RUN
3. Type “devmgmt.msc” in the prompt and click “OK”

4. In other devices>> right click “VGA adapter..”

5. Click “update driver”

6. Select “No, not this time” and Click “Next”


7. Select “Install from a list or specific location(Advanced)” and Click “Next”
8. Select “Don`t search. I will choose” and Click “Next”
9. From the list scroll down and select “Show All Devices” (the first option and not
“Sound and video..”)

10. Click “Have Disk..”


11. Click “Browse” and choose this folder (the previous installation temp folder of
chipset driver)

12. Select the “C:\NVIDIA\nForceWin2K\18.11\English\Display\nv4_disp.inf″ file and


Click “Open”
13. Click “OK”

14. Select “NVIDIA GeForce 8200″

15. Click “Next”

16. Click “Finish”

—————————————————————-
II. Manual Installation Help for (06. Audio/Sound)
—————————————————————-

0. Download the corresponding file and unzip.

01. Click START


02. Click RUN
03. Type “devmgmt.msc” in the prompt and click “OK”

04. In other devices>> You will see two nos of “Audio Device on HD Audio Bus”

05. Right Click the first one and Click “disable”

06. In other devices>> right click the second Audio Device on ……..
07. Click “update driver”
08. Select “No, not this time” and Click “Next”
09. Select “Install from a list or specific location(Advanced)” and Click “Next”
10. Select “Don`t search. I will choose” and Click “Next”
11. From the list scroll down and select “Sound, video and game controller” and Click
next

12. Click “Have Disk..”


13. Click “Browse” and choose this folder
14. Select the “/XP32/WiSVHe5″ file and Click “Open”
15. Click “OK”
16. Click “Next”
17. A menu appears saying “Installing …. Do you want to continue?” Click “YES”
18. Click “Continue Anyway”

===============================================================

—————————————————————-
III. Manual Installation Help for (09. Wireless )
—————————————————————-
0. Download the corresponding file and unzip.
1. Click START
2. Click RUN
3. Type “devmgmt.msc” in the prompt and click “OK”

4. In other devices>> right click “Ethernet Controller”


5. Click “update driver”

6. Select “No, not this time” and Click “Next”


7. Select “Install from a list or specific location(Advanced)” and Click “Next”
8. Select “Don`t search. I will choose” and Click “Next”
9. From the list scroll down and select “network Adapters” and Click “Next” wait

10. Click “Have Disk..”


11. Click “Browse” and choose this folder
12. Select the “/Atheros/net5211″ file and Click “Open”
13. Click “OK”
14. Click “Next”
15. Click “Finish”

..

You might also like