Proofex GPX
Proofex GPX
Proofex GPX
Tensile strength
(ASTM D638:1991)
Elongation of membrane
(ASTM D638:1991)
Elongation of compound
(ASTM D412)
Tear resistance
(ASTM D1004:1990)
Adhesion to concrete
(ASTM D1000)
Adhesion to self
(ASTM D1000)
Puncture resistance
(ASTM E154:1993)
Water absorption @ 24 hrs
(ASTM D570)
Water permeability
(DIN 1048:pt 5:1991)
Tape Strength
(ASTM D638:1991)
Crack bridging
(ASTM C836:1995)
Environmental resistance
(ASTM D543)
:
:
Long
Trans
Long
Trans
39 N/mm2
46 N/mm2
250%
200%
:
:
>2000%
Long
270 N/mm
Trans
225 N/mm
2.2 N/mm2
3.5 N/mm2
Min 400 N
< 0.02%
:
:
Nil
Long
Trans
1.5mm
Conforms
4.3 N/mm
5.8 N/mm
Surface preparation
Specification
Proofex Tack Coat 6HT must be applied to the substrate and allowed
to dry until it is tack free, prior to the application of the membrane.
All surfaces must be re-primed if left for more than 24 hours prior to
the application of Proofex GPX.
Proofex GPX
Properties
Priming
Application
Smooth transition should be made at wall/floor slab junctions using
a sand/cement mortar and internal and external corners at walls and
upstands pre-protected with Proofex Corner Pieces prior to the
application of the membrane.
The membrane should be applied to the substrate having first
removed the siliconised release paper, pressing the polyethylene
film firmly ensuring that the adhesive bitumen compound bonds
continuously to the substrate with no air pockets.
Storage
Limitations
Estimating
Supply
Proofex GPX
Coverage
Proofex Tack Coat 6HT
:
:
> 65C
> 38C
DUBAI
ABU DHABI
BAHRAIN
KUWAIT
OMAN
QATAR
Al Gurg Fosroc
Al Gurg Fosroc
YBA Kanoo
Boodai
GETCO
Tadmur
TEL : 738200
FAX : 732828
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which
may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing, it is the
customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product is suitable for
the intended application, and that the actual conditions of use are in accordance with those recommended. Because Fosroc has no control over the conditions of
use of its products, all recommendations or suggestions regarding the use of these products are made without guarantee.
www.fosrocgulf.com
UAE/0168/01/J