0% found this document useful (0 votes)
233 views10 pages

DUAL CELL Activation

DUAL CELL Activation

Uploaded by

Ahmed Hakiem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
233 views10 pages

DUAL CELL Activation

DUAL CELL Activation

Uploaded by

Ahmed Hakiem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Dual-cell HSDPA

Soc Classification level


1
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

Introduction
Dual Cell allow 2 adjacent channels to be combined
to generate an effective HSDPA channel bandwidth
of 10 MHz
Dual Cell Approach

Soc Classification level


2
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

DC-HSDPA Principles

DC-HSDPA provides greater flexibility to the HSDPA Scheduler, i.e. the scheduler can allocated resources
in the frequency domain as well as in the code and time domains

Soc Classification level


3
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

Example from DT
HSDPA Throughput enhanced after DC HSDPA activated as below

Before

After

Before

Soc Classification level


4
Nokia Siemens Networks

After

Max

18400 KB/S

24955 KB/S

Aver

4932 KB/S

8768 KB/S

Author Ahmed Hakiem / Date 10 Dec 2015

DC-HSDPA: UE Cat & Requirements

DC-HSDPA & 64QAM enable DL 42 Mbps peak rates


UE categories for DC-HSDPA support: Cat. 21, 22, 23 & 24
optional feature:
requires long term RNC license for specific number of cells ( Already Installed in All RNCs )

following features must be enabled on the 2 Carriers :

HSDPA (HSDPAEnabled)
HSUPA (HSUPAEnabled)
HSDPA 15 codes (HS-PDSCHcodeset)
HSDPA 14 Mbps per User (HSDPA14MbpsPerUser)
HSDPA64QAMallowed (good channel conditions required to apply / take benefit of 64QAM CQI >= 26)
DCellHSDPAEnabled
DCellHSDPAFmcsId

Soc Classification level


5
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

DC-HSDPA & LCG

DC
HSDPA
2 LCG

1 LCG

DC HSDPA Enabled after New


Splitting (must be per sector
not per carrier)

Soc Classification level


6
Nokia Siemens Networks

DC HSDPA Enabled Direct after the


previous Features enabled without

any other action

Author Ahmed Hakiem / Date 10 Dec 2015

DC HSDPA Activation On 2 LCG


We must make LCG Splitting per Sector

I.

To make LCG Splitting ( 2 HSDPA & HSUPA PSs or more ) must be in The site

II. each cell belonging to the same sector must be in The Same LCG & have the same Tcell value

III. We divide the Sectors in 2 LCG based on the traffic per Cell
IV. Tcell values belonging to different sectors must belong to different Tcell groups in the same LCG

Soc Classification level


7
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

LCG Splitting Configuration needed to activate DC HSDPA


Parameter name

Family Name

Defination

Comment

listId

A_WBTSF_LCELGW_LCELIDLIST

Cell ID no of In LCG

Must be sorted from smallest to largest In


Every LCG from 1 to 12

lCelIdList

A_WBTSF_LCELGW_LCELIDLIST

LCR ID In LCG

Must take the same LCR ID of the cell

lCelGwId

A_WBTSF_LCELGW_LCELIDLIST

Cell group identification.

hsdpaThroughputStep

A_WBTSF_BTSSCW_HSDPASCHEDLIST

Defines the scheduler inside local cell group


Maximum throughput for HSDPA scheduler

sched

A_WBTSF_BTSSCW_HSDPASCHEDLIST

Defines the scheduler inside local cell group.

accessBbCapacity

A_WBTSF_LCELGW

Defines the access to Baseband HW capacity


for each local cell group.

Must equal shareOfHSUPALicences

dedicatedBbCapacity

A_WBTSF_LCELGW

Defines the quarantined Baseband capacity


for each local cell group

Must equal 0

shareOfHSDPAUser

A_WBTSF_LCELGW

defines how many licensed HSDPA users


belongs to certain LCG

Must equal 0

shareOfHSUPALicences

A_WBTSF_LCELGW

defines how many HSUPA licenses belongs


to certain LCG. No common pool.

Divided based on the percentage of the


traffic of the cells in every LCG

MaxNumberEDCHLCG

A_WBTS

the maximum number of E-DCH allocations in


the BTS specific local cell group

Multiply in the percentage of


shareOfHSUPALicences

Soc Classification level


8
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

By default it was 3 But we Change it to 6 if


there is HSDPA PSs type 3 to reach to 42 M
DL rate

DC HSDPA Counters

M5000C329 / SUM OF ACTIVE DC HSDPA USERS WITH ONE CARRIER


M5000C328 / SUM OF ACTIVE DC HSDPA USERS WITH TWO CARRIERS.
M5000C330 / SUM OF CAPABLE DC HSDPA USERS. . . . . . . . . . . .

M5000C331 / TTI SCHEDULED DC HSDPA USER FOR PRIMARY CARRIER WITH ONE CARRIER
M5000C332 / TTI SCHEDULED DC HSDPA USER FOR SECONDARY CARRIER WITH ONE CARRIER
M5000C333 / TTI SCHEDULED DC HSDPA USER FOR PRIMARY CARRIER WITH TWO CARRIER.
M5000C334 / TTI SCHEDULED DC HSDPA USER FOR SECONDARY CARRIER WITH TWO CARRIER.

There is report already created with the above Counters

Soc Classification level


9
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

Enjoy & Thank You


Ahmed Hakiem

Soc Classification level


10
Nokia Siemens Networks

Author Ahmed Hakiem / Date 10 Dec 2015

You might also like