Scribd Logo
Upload

Welcome to Scribd!

  • 123 views

    Nitoseal 130

    Uploaded by

    Venkata Rao
    Nitoseal 130 is a one-part, acetoxy-curing silicone sealant that forms a flexible and elastic seal. It can be used to seal internal and external joints in ceramic tiles, sanitary ware, and glazing applications. Nitoseal 130 has good adhesion without primers on many surfaces. It cures in 24 hours at 23°C and 50% RH to form a seal with 25% movement accommodation. The sealant is supplied in 280ml cartridges and has a shelf life of at least 9 months when stored properly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Nitoseal 130

    Uploaded by

    Venkata Rao
    123 views2 pages
    Nitoseal 130 is a one-part, acetoxy-curing silicone sealant that forms a flexible and elastic seal. It can be used to seal internal and external joints in ceramic tiles, sanitary ware, and glazing applications. Nitoseal 130 has good adhesion without primers on many surfaces. It cures in 24 hours at 23°C and 50% RH to form a seal with 25% movement accommodation. The sealant is supplied in 280ml cartridges and has a shelf life of at least 9 months when stored properly.

    Original Description:

    nitoseal 130

    Original Title

    nitoseal 130

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Nitoseal 130 is a one-part, acetoxy-curing silicone sealant that forms a flexible and elastic seal. It can be used to seal internal and external joints in ceramic tiles, sanitary ware, and glazing applications. Nitoseal 130 has good adhesion without primers on many surfaces. It cures in 24 hours at 23°C and 50% RH to form a seal with 25% movement accommodation. The sealant is supplied in 280ml cartridges and has a shelf life of at least 9 months when stored properly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    123 views2 pages

    Nitoseal 130

    Uploaded by

    Venkata Rao
    Nitoseal 130 is a one-part, acetoxy-curing silicone sealant that forms a flexible and elastic seal. It can be used to seal internal and external joints in ceramic tiles, sanitary ware, and glazing applications. Nitoseal 130 has good adhesion without primers on many surfaces. It cures in 24 hours at 23°C and 50% RH to form a seal with 25% movement accommodation. The sealant is supplied in 280ml cartridges and has a shelf life of at least 9 months when stored properly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Nitoseal 130*

    Silicone joint sealant - acid cure


    Uses

    Properties

    For use internally or externally for sealing joints in ceramic


    tiling, sanitary ware, hygienic areas and in glazing applications.
    It can also be used for sealing joints in certain lightweight
    plastic and metal cladding.

    Specific gravity

    1.03

    Standard colours

    Translucent, aluminium, grey,


    white, beige, bronze &

    Advantages

    n One component, ready to use, simple to apply


    n Available in a range of colours
    n Cures to form a very flexible, elastic seal
    n Good slump resistance
    n Excellent weathering characteristics
    n Good chemical resistance
    Description

    Nitoseal 130 is an acetoxy curing silicone rubber joint sealant


    that cures by exposure to atmospheric moisture. It is applied
    simply from the cartridge and can be finished neatly with
    appropriate tooling. When cured it forms a tough elastic
    seal which accommodates thermal, shrinkage or moisture
    movements.
    Design criteria

    Joints should be designed so that movement due to


    shrinkage and thermal changes do not exceed the 25%
    Movement Accommodation Factor, related to joint width.
    Where possible the sealant depth should be between 1/3
    and 1/2 of the joint width. The sealant depth must never
    exceed joint width.
    Joint Width (mm)
    3 (min) - 5
    6 - 10
    11 - 20
    21 - 25 (max)

    Sealant Depth (mm)


    as joint width
    5
    6 - 10
    10 - 15

    Technical support

    Nitoseal 130

    Fosroc offers a comprehensive technical support service to


    specifiers, end users and contractors. It is also able to offer
    on-site technical assistance, an AutoCAD facility and
    dedicated specification assistance in locations all over the
    world.

    black
    Movement accom. factor :
    (BS 6093)
    Hardness shore A
    (DIN 53505)
    :
    Skinning time
    (@ 23C, 50% RH)
    Cure time
    (@ 23C, 50% RH)
    Application temp.
    Service temp. range

    25%

    16-22 (@23C, 50% RH


    after 4 weeks)
    15 - 20 minutes

    24 hours to 2 mm depth

    :
    :

    5C to 50C
    -40C to 120C

    Instructions for use

    Joint Preparation
    Joint surfaces must be clean, dry and frost free. Remove all
    dust and laitance by grit blasting, grinding or rigorous wire
    brushing. Where necessary to achieve the correct joint profile,
    Expancell* backing cord should be used. In joints not using
    Expancell, Nitoseal Debonding Tape should be placed in the
    base of the joint.
    Priming
    Nitoseal 130 exhibits excellent adhesion without primer to
    glass, tiles, ceramics, aluminium and anodised aluminium.
    Application
    Nitoseal 130 can be applied by hand or air operated caulking
    gun. Ensure that the sealant is pushed firmly in to the joint
    to give complete wetting of the surface. Any tooling of the
    sealant surface must be carried out immediately using a joint
    shaping tool soaked in detergent solution. If required the
    edges of the joint can be protected with masking tape - if
    this is done ensure that the tape is removed immediately
    after tooling.
    Cleaning
    Uncured sealant can be removed by wiping with rags soaked
    in Fosroc Solvent 102. Cured material can only be removed
    mechanically.

    Limitations

    Precautions

    Nitoseal 130 is not recommended for use in direct contact


    with masonry, concrete or other alkaline surfaces.

    Health and safety

    Estimating

    Supply
    Nitoseal 130

    280 ml cartridges
    (24 cartridges per carton)

    Guide to sealant quantities


    Number of cartridges required =
    Joint Width(mm) x Sealant Depth(mm) x Joint Length(m)
    280
    A further amount should be allowed for wastage.

    Nitoseal 130 and Fosroc Solvent 102 should not come into
    contact with eyes and skin or be swallowed. The use of
    protective gloves is recommended. Avoid inhaling vapours
    as they may be offensive. Ensure adequate ventilation when
    using Fosroc Solvent 102.
    Should accidental skin contact occur, remove immediately
    with a resin removing cream such as Kerocleanse Standard
    Grade Skin Cleanser or Rozaklens Industrial Skin Cleanser,
    followed by washing with soap and water. Do not use
    solvent.
    In case of contact with eyes, rinse immediately with plenty of
    clean water and seek medical advice.
    If swallowed, seek medical attention immediately - do not
    induce vomiting.

    Storage

    Shelf life

    Fire

    At least 9 months if stored in the original unopened containers


    in dry place below 25C. Do not store in direct sunlight.

    Nitoseal 130 does not readily support flame. Fosroc Solvent


    102 is flammable. Store away from heat and sources of static
    charges. Do not smoke or use near naked flames. No
    smoking. In the event of fire, extinguish with CO2 or foam.
    Do not use a waterjet.
    Flash points
    Fosroc Solvent 102

    33C

    For further information, refer to the Product Material Safety


    Data Sheet.

    * Denotes the trademark of Fosroc International Limited

    REGIONAL SALES OFFICES IN :

    Al Gurg Fosroc LLC


    P. O. Box 657
    Dubai
    United Arab Emirates
    TEL : (04) 285 8606
    FAX : (04) 285 9649

    See separate data sheet

    DUBAI

    ABU DHABI

    BAHRAIN

    KUWAIT

    OMAN

    QATAR

    Al Gurg Fosroc

    Al Gurg Fosroc

    YBA Kanoo

    Boodai

    GETCO

    Tadmur

    TEL : 285 8787

    TEL : 673 1779

    TEL : 738200

    TEL : 481 7618

    TEL : 771 5080

    TEL : 441 3628

    FAX : 285 2023

    FAX : 673 1449

    FAX : 732828

    FAX : 483 2124

    FAX : 771 7554

    FAX : 444 0812

    Important note
    Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which
    may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing, it is the
    customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product is suitable for
    the intended application, and that the actual conditions of use are in accordance with those recommended. Because Fosroc has no control over the conditions of
    use of its products, all recommendations or suggestions regarding the use of these products are made without guarantee.

    www.fosrocgulf.com

    UAE/0366/00/B

    You might also like