Scribd Logo
Upload

Welcome to Scribd!

  • 115 views

    Lab Manual - Level 3 - Mini Project

    Uploaded by

    Nur Syahira
    This document outlines an open-ended laboratory assignment for students to analyze water quality for a new residential development. Students will collect a water sample, design and conduct laboratory tests to evaluate the physical and chemical characteristics, analyze the results, and determine if the water is suitable for use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lab Manual - Level 3 - Mini Project

    Uploaded by

    Nur Syahira
    115 views2 pages
    This document outlines an open-ended laboratory assignment for students to analyze water quality for a new residential development. Students will collect a water sample, design and conduct laboratory tests to evaluate the physical and chemical characteristics, analyze the results, and determine if the water is suitable for use.

    Original Description:

    phy

    Original Title

    Lab Manual - Level 3_mini Project

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines an open-ended laboratory assignment for students to analyze water quality for a new residential development. Students will collect a water sample, design and conduct laboratory tests to evaluate the physical and chemical characteristics, analyze the results, and determine if the water is suitable for use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    115 views2 pages

    Lab Manual - Level 3 - Mini Project

    Uploaded by

    Nur Syahira
    This document outlines an open-ended laboratory assignment for students to analyze water quality for a new residential development. Students will collect a water sample, design and conduct laboratory tests to evaluate the physical and chemical characteristics, analyze the results, and determine if the water is suitable for use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FAKULTI

    KEJURUTERAAN AWAM
    UNIVERSITI TEKNOLOGI MARA
    PASIR GUDANG
    LABORATORY MANUAL

    COURSE

    WATER AND WASTEWATER ENGINEERING

    COURSE CODE

    ECW351

    LEVEL OF OPENNESS

    CATEGORY

    FULLY OPEN

    DEGREE OF OPEN-ENDED (%)

    100

    PERIOD OF ACTIVITY

    5 WEEKS


    TITLE

    MINI PROJECT


    1.1 Introduction
    The need for an open-ended laboratory activity is emphasized in enhancing
    independent learning activities and inculcating creativity and innovation of
    students.
    This open-ended laboratory activities is created to provide a platform for
    students (as a group) to determine the objectives and scopes of the
    laboratory assignment, identify the necessary apparatus and prepare step
    by step methodology to carry out the task to address the given problem.
    The group will be required to analyse all the technical data obtained and
    present them in a technical format.
    1.2 Objective
    PREAMBLE

    The objective of this activity is:


    To solve a given problem using the right laboratory testing tools and
    methodology.

    1.3 Learning Outcomes
    At the end of the laboratory activities, students would be able to:
    1. Determine the suitable laboratory tests and procedures to follow to
    address the given problem.
    2. Analyse test data and present the solution to the open-ended
    problem.
    3. Work in a group to undertake the task and produce the relevant
    technical report.

    FKA, UiTM, PASIR GUDANG

    May 2015

    FAKULTI KEJURUTERAAN AWAM


    UNIVERSITI TEKNOLOGI MARA
    PASIR GUDANG
    LABORATORY MANUAL

    2. The Problem
    A new water treatment plant will be built in a new residential area. As an
    civil engineer, you are responsible on the water quality assessment of the
    project. Suggest the relevant water tests that need to be undertaken and
    discuss the possible cause and mitigations measure should it exceed
    allowable limit.

    PROBLEM STATEMENT

    In this water assessment analysis, two problems need to be tackled before


    the suitability of the intake point and acceptability of the treated water could
    be determined. The focus of your analysis can be constructed as given
    below:
    1. The physical characteristic of the water,
    2. The chemical characteristic of the water,
    Each group has to collect their own sample from the possible source of
    water that can be used as water supply. The group is required to design
    and conduct suitable and related laboratory test to obtain the relevant water
    parameters to address the two (2) related problems mentioned above.
    This task should be completed within 5 laboratory session in 5 consecutive
    weeks. Students are going to conduct all the experiments in the
    Environment Laboratory.
    3.1

    Apparatus
    The group must identify the availability of the chosen apparatus in the
    laboratory before the right procedures can be identified.

    3.2

    Procedures
    The group is required to search for the relevant procedure to carry out
    the test based on the available apparatus in your laboratory. The
    document must be made ready for verification by the instructor before
    the laboratory activity commences.

    WAYS & MEANS

    3.3

    Data Acquisition
    All data collected and observed during the test must be tabulate in
    proper format for easy verification and presentation of the technical
    report

    4. Results, Analysis and Conclusion

    RESULTS

    The group is required to submit the technical report of the laboratory results
    highlighting the apparatus used, the procedures undertaken for the test,
    data acquisition process, analysis carried out and the relevancy of the setout output to address the given problem. The results also should discuss
    the suitability of the water sample as water supply with strong supporting
    points and evidences. The format of the technical report is left to the
    creativity discretion of the group.
    The report must be submitted 7 days after the completion of the test.

    FKA, UiTM, PASIR GUDANG

    May 2015

    You might also like