Spero Split AC Option - 1 Quote
Spero Split AC Option - 1 Quote
Spero Split AC Option - 1 Quote
Dear Sir,
Sub: Supply and Installation of Split Air conditioner
We are pleased to submit our best terms for supply and installation of Split Air conditioner for your project.
Price list for Air conditioner
Sl no
Location
Description
Qty
Kitchen( 180
sq.ft)
Description
Supply of (20 Swg)soft drawn refrigerant piping, the copper pipes to be insulated with
13mm thick Superlon make nitrile rubber sleeves.
Interconnecting electrical cabling between outdoor to indoor unit (4C X 2.5 sq.mm)
( Mardia) (Split AC)
Drain Piping with sufficient water seal assembly, 9mm sleeve insulated and connected to
nearest drain point with 1 PVC Pipe. (Concealed)
Consumable Items for Split Air Conditioner (Rubber pad, Nut, Bolt & Wire ties)
EQUIPMENT COST
INSTALLATION COST
TOTAL PROJECT COST
Note:
The quantity of materials given in the quote for the installation are approximate. They may likely to vary while exec
based on the Site conditions. The actual quantity of each material used at the Site will be taken in to account after the
job. The difference in the quantity of materials will be added/ deducted accordingly in the final bill to be generated.
In case of any change in the location of Indoor/ Outdoor units or any damage found in the copper pipe already laid
external forces, re-Quote will be furnished for the additional requirement of the same.
Outdoor unit will be fixed in terrace floor above pedestal. The pedestal provided by client
A.Scope of Work
1. Supply and installation of Split Air conditioner.
2. Copper pipe with insulation.
3. Electrical hook up (outdoor unit to indoor unit)
4. Testing and Commissioning.
B.Works not included in our price
1. Any related civil works.
2. Cutting or breaking of beams or walls.
3. Electrical points near condensing units (wherever applicable).
4. M.C.C.B.Panel/Tripper/Breaker.
5. Temporary electrical connection
6. Concrete Foundation/Angle Frame (wherever applicable).
7. Scaffolding/Ladder has to be provided by the customer.
C.Payment
Equipment 100% advance in favour of COLD POINT PVT. LTD.
Installation 75% advance in favour of COLD POINT PVT. LTD.
Installation 20% 2nd advance on progress of work in favour of COLD POINT PVT. LTD.
Installation 5% balance payment against completion of work in favour of COLD POINT PVT. LTD.
D. Validity: 30-09-2014
E.Delivery: 7days from the date of approval & clearance of payment.
We thank you once again for your valued enquiry and look forward to receiving
your valued order.
Thanking you,
Yours truly,
COLD POINT PVT. LTD.
Subramanian
V.P.Marketing
9840909935
on
15/9/2014
Revised on: 20-09-2014
Revised on: 25-09-2014
Unit
Mrp
Special
Price
VAT
14.5%
Total
Amount
No
54900
45,165
19647
155142
Total
155142
Qty
Unit
Rate
Amount
Nos.
800
800
Nos.
1200
1,200
Nos.
300
300
15
Rmt
984
14,760
17
Rmt
150
2,550
Rmt
164
820
Nos.
200
200
Rolls
150
900
Total
2,300
19,230
155142
24603
179745
21,530
284
2,788
24,603
Normal quotation
Ref: CPPL/SALES ENQ /631/2014-15
TO,
M/s. Spero Apartment
Kotturpuram
Dear Sir,
Sub: Supply and Installation of Split Air conditioner
We are pleased to submit our best terms for supply and installation of Split Air conditioner for your project.
Price list for Air conditioner
Sl no
Location
Description
Qty
Kitchen( 180
sq.ft)
Description
Equalizer DAKIN Recommended 5 kva wall mounting Double booster
Qty
1
1
Description
Supply of (20 Swg)soft drawn refrigerant piping, the copper pipes to be insulated with
13mm thick Superlon make nitrile rubber sleeves.
Interconnecting electrical cabling between outdoor to indoor unit (4C X 2.5 sq.mm)
( Mardia) (Split AC)
Drain Piping with sufficient water seal assembly, 9mm sleeve insulated and connected to
nearest drain point with 1 PVC Pipe. (Concealed)
Consumable Items for Split Air Conditioner (Rubber pad, Nut, Bolt & Wire ties)
EQUIPMENT COST
STABILIZER COST
INSTALLATION COST
TOTAL PROJECT COST
Note:
The quantity of materials given in the quote for the installation are approximate. They may likely to vary while exec
based on the Site conditions. The actual quantity of each material used at the Site will be taken in to account after the
job. The difference in the quantity of materials will be added/ deducted accordingly in the final bill to be generated.
In case of any change in the location of Indoor/ Outdoor units or any damage found in the copper pipe already laid
external forces, re-Quote will be furnished for the additional requirement of the same.
Outdoor unit will be fixed in terrace floor above pedestal. The pedestal provided by client
A.Scope of Work
1. Supply and installation of Split Air conditioner.
2. Copper pipe with insulation.
3. Electrical hook up (outdoor unit to indoor unit)
4. Testing and Commissioning.
B.Works not included in our price
1. Any related civil works.
2. Cutting or breaking of beams or walls.
3. Electrical points near condensing units (wherever applicable).
4. M.C.C.B.Panel/Tripper/Breaker.
on
15/9/2014
Revised on: 20-09-2014
Revised on: 25-09-2014
Unit
Mrp
Special
Price
VAT
14.5%
Total
Amount
No
54900
45,165
6549
51714
Total
51714
Unit
Rate
VAT
14.5%
TOTAL
AMOUNT
Nos.
3,930
570
4500
Total Amount
4500
Qty
Unit
Rate
Amount
Nos.
800
800
Nos.
1200
1,200
Nos.
300
300
13
Rmt
984
12,792
15
Rmt
150
2,250
Rmt
164
820
Nos.
200
200
Rolls
150
900
Total
2,300
16,962
51714
4500
22006
78220
19,262
284
2,459
22,006
Normal quotation
Ref: CPPL/SALES ENQ /631/2014-15
TO,
M/s. Spero Apartment
Kotturpuram
Dear Sir,
Sub: Supply and Installation of Split Air conditioner
We are pleased to submit our best terms for supply and installation of Split Air conditioner for your project.
Price list for Air conditioner
Sl no
Location
Description
Qty
Kitchen( 180
sq.ft)
Description
Equalizer DAKIN Recommended 5 kva wall mounting Double booster
Qty
1
1
Description
Supply of (20 Swg)soft drawn refrigerant piping, the copper pipes to be insulated with
13mm thick Superlon make nitrile rubber sleeves.
Interconnecting electrical cabling between outdoor to indoor unit (4C X 2.5 sq.mm)
( Mardia) (Split AC)
Drain Piping with sufficient water seal assembly, 9mm sleeve insulated and connected to
nearest drain point with 1 PVC Pipe. (Concealed)
Consumable Items for Split Air Conditioner (Rubber pad, Nut, Bolt & Wire ties)
EQUIPMENT COST
STABILIZER COST
INSTALLATION COST
TOTAL PROJECT COST
Note:
The quantity of materials given in the quote for the installation are approximate. They may likely to vary while exec
based on the Site conditions. The actual quantity of each material used at the Site will be taken in to account after the
job. The difference in the quantity of materials will be added/ deducted accordingly in the final bill to be generated.
In case of any change in the location of Indoor/ Outdoor units or any damage found in the copper pipe already laid
external forces, re-Quote will be furnished for the additional requirement of the same.
Outdoor unit will be fixed in terrace floor above pedestal. The pedestal provided by client
A.Scope of Work
1. Supply and installation of Split Air conditioner.
2. Copper pipe with insulation.
3. Electrical hook up (outdoor unit to indoor unit)
4. Testing and Commissioning.
B.Works not included in our price
1. Any related civil works.
2. Cutting or breaking of beams or walls.
3. Electrical points near condensing units (wherever applicable).
4. M.C.C.B.Panel/Tripper/Breaker.
on
15/9/2014
Revised on: 20-09-2014
Revised on: 25-09-2014
Unit
Mrp
Special
Price
VAT
14.5%
Total
Amount
No
54900
45,165
6549
51714
Total
51714
Unit
Rate
VAT
14.5%
TOTAL
AMOUNT
Nos.
3,930
570
4500
Total Amount
4500
Qty
Unit
Rate
Amount
Nos.
800
800
Nos.
1200
1,200
Nos.
300
300
11
Rmt
984
10,824
13
Rmt
150
1,950
Rmt
164
820
Nos.
200
200
Rolls
150
750
Total
2,300
14,544
51714
4500
19237
75451
16,844
284
2,109
19,237