Scribd
Upload
102 views2 pages

Ee 302: Electrical Machines Ii (3-1-2: 5)

This document provides an overview of the course EE 302: Electrical Machines II. The course covers polyphase induction machines including construction, operation, characteristics, and methods of starting and speed control. Special machines such as high torque induction motors, induction generators, and stepper motors are also covered. The course examines single phase induction motors, synchronous machines including operation and characteristics, and parallel operation of alternators. Suggested experiments involve testing induction motors, alternators, synchronous motors, and various motor starters and controls.

Uploaded by

VipinMalik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views2 pages

Ee 302: Electrical Machines Ii (3-1-2: 5)

This document provides an overview of the course EE 302: Electrical Machines II. The course covers polyphase induction machines including construction, operation, characteristics, and methods of starting and speed control. Special machines such as high torque induction motors, induction generators, and stepper motors are also covered. The course examines single phase induction motors, synchronous machines including operation and characteristics, and parallel operation of alternators. Suggested experiments involve testing induction motors, alternators, synchronous motors, and various motor starters and controls.

Uploaded by

VipinMalik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EE 302: ELECTRICAL MACHINES II

(3-1-2: 5)

Polyphase Induction Machines


Construction, principle of operation, slip, phasor diagram, equivalent circuits, expression for torque, and output
power, slip torque characteristics, effect of variation of supply voltage and rotor resistance on the characteristics,
circle diagram, predetermination of characteristics from the circuit diagram, drawing circle diagram from design
parameters and no load and blocked rotor test data, starting of induction motors, direct on line starter, star-delta
starter and autotransformer starter for cage induction motor, rotor resistance starter for slip ring induction motor,
speed control of induction motor by varying supply voltage, supply frequency and pole changing, speed control of slip
ring induction motor by rotor resistance.
Special Machines
High torque induction motor, double cage and deep bar rotor construction, mains operated and self-excited induction
generators, hysteresis motor, reluctance motor and stepper motor, brushless motors.
Single Phase Induction Motors
Principle of operation, double revolving field theory, equivalent circuit, performance calculations and characteristics,
starting methods, maximum starting torque conditions.
Synchronous Machines
Types of Exciters for synchronous machines, MMF and EMF phasor diagrams for cylindrical rotor synchronous
machines, armature reaction, open and short circuit characteristics, leakage reactance, synchronous reactance,
phasor diagram under loaded conditions, load characteristics, predetermination of regulation by EMF and Potier
triangle methods for non-salient pole alternators, steady state power flow equations, power angle characteristics,
constant excitation and constant power output, circle diagram for synchronous machines. two reaction theory for
salient pole alternators and pre-determination for regulation, slip test, V curves, inverted V curves, compounding
curves for synchronous motors, synchronizing power, synchronizing torque, hunting phenomenon, starting of
synchronous motor, synchronous condenser.
Parallel Operation of Alternators
Synchronizing, Synchroscope, parallel operation of alternators, alternator on infinite bus-bar, effect of change of
excitation and prime mover inputs, expressions for power developed as a function of torque angle, maximum power.
Suggested list of Experiments:

1. No load, blocked rotor and load test on a three phase induction motor
2. No load, blocked rotor and load test on a single phase induction motor
3. Open circuit, short circuit and ZPF tests of alternator and estimation of regulation by various
methods
4. Synchronization and V-curves of a synchronous motor
5. Parallel operation of alternators
6. Speed control of 3-phase induction motor using variable voltage, variable frequency sinusoidal
source

7. Study of starters for A C motors


8. Operation of induction machine as an isolated generator-estimation of suitable capacitance for selfexcitation,
9. Stepper motor characteristics
Test Books

1. P S Bhimbra, Electrical Machinery, Khanna Publishers.


2. Fitzerald, Kingsley and Uman, Electrical Machinery, TMH.
References

1. A S Langsdorf, Theory of A.C. Machines, PHI.


2. M G Say, The performance and Design of Alternating current-machines.

You might also like