GOVERNM

INDIA

ENT OF

CENTRAL
PUBLIC WORKS DEPARTMENT

DELHI SCHEDULE
OF RATES

2014

Published Under The

General CPWD, Nirman

Authority of Director
Bhawan, New Delhi

All rights reserved. No part of this publication, either in English or in

Hindi, may be reproduced in any form or by any means, electronic or
mechanical including photocopy, recording or any information storage and
retrieval system, without permission, in writing, from the Director
General, CPWD, New Delhi
This Delhi Schedule of Rates 2014 is prepared for the use of CPWD.
However, this may be used by other Govt. departments, PSUs, private
bodies & individuals also at their own discretion. CPWD shall not be
responsible for any ambiguity, discrepancy, dispute or fnancial loss,
A GOVERNMENT OF INDIA PUBLICATION

Published by

Director
General
Central Public Works
Department Nirman
Bhawan
New Delhi-110011

Price : Rs. 600/Excluding, Postage, Packing and Delivery Charges etc.

Printed and Marketed by

M/s Kshitiz
Enterprises D-57
South Extension Part-1
New Delhi-110049
Phone : 011-41648857,
Mobile : 9811032311,
9311332311 Email :
[email protected]
[email protected]

kk
k
Hkkjr ljdkj
Government of India

V.K. GUPTA

U sUhh; k yksfsd k fuekZ

k f Z.k
ds
kk
foHkkx
fuekZ.k Hkou] ubZ
fnYyh&110011

Director General

Central Public Works Department

F OREWOR D

Nirman Bhawan, New Delhi-110011

Tel.:23062556/1317, Fax :
23061884 Email: [email protected]

Delhi Schedule of Rates, being published by C.P.W.D. from time

to time, is a very comprehensive document and useful in
execution of works. Apart from C.P.W.D., this Schedule of Rates is
used as a guide by a number of departments, public sector
undertakings, private sector builders and architects etc.
The Central Public Works Department Schedule of Rates was first
compiled in the year 1931, followed by a number of revisions
from time to time in order to bring it in line with the prevailing
technology and market rates. The Delhi Schedule of Rates were
revised many times in the subsequent years viz. 1977,1981,
1985, 1989, 1993, 1997, 2002, 2007, 2010 (Reprint), 2012 &
2013.
The prices of labour and materials have registered substantial
increase since then. Besides the cost, there has been spurt of
new construction materials. This has necessitated revision of
existing DSR-2013 to include the above changes.
Although this DSR contains most of the items of DSR 2014, the
nomenclature of existing items has been reviewed & updated
wherever found necessary. Some new items of road work have
also been introduced.The Similar items have been clubbed
together to facilitate convenience of use.
I wish to place on record the technical input efective
coordination on the part of Shri Mukesh Vij ADG(TD) and Shri B.B.
Dhar, CE(CSQ), and the efforts put in by Shri Mathura Prasad,
SE(TAS) and his team of officers in TAS unit in finalizing the DSR2014 in a record time.
I am sure that this Schedule of Rates-2014 will be quite useful to
all concerned in the Building construction industry
in general and CPWD in particular.

Place : New Delhi

Date : July 2014

(V.K. Gupta)

III

IV

PREFACE
1.

Delhi Schedule of Rates- 2014 includes the existing items of DSR 2013 with
modification in few items and addition of new items in line with emerging trends
in construction Industry.

2.

Following are the salient features of DSR- 2014.

3.

a)

DSR- 2014 is a bilingual (Hindi version will follow).

b)

This DSR 2014 shall be read along with CPWD specifications 2009 Vol. I &
II with up to date Correction Slips.

c)

New Material Codes have been assigned for the newly introduced materials.

d)

The basic materials incorporated in this DSR 2014 are considered to

be conforming to BIS Standards / CPWD Specifications / Materials of
good quality generally available in the market.

The new items for 100 mm thisk M-25 RCC Drain Covers and M-30 PU mould
paver blocks have been introduced in Sub head 16 for Road work.
The item for bored caste in situ RCC piles has been divided in two parts.
The equipment for boring the piles has been defined in the item no 20.2 and
new item 20.2 A for using the tripod and mechanical winch machine have been
introduced.

4.

Wherever the work of Flyover, Bridge, Grade separator and Highways/

Hill Road/Major Road are involved, MoRTH specifications and its Standard
data book for the analysis of rates shall be followed.

5.

DSR- 2014 is based on the prevailing market rates of materials in Delhi as

on 01.04.2014. The labour rates adopted are as per minimum wages rates
issued by Govt. of Delhi w.e.f. 1/4/2014.

6.

The cost index for DSR 2014 is 105 with reference to Delhi Plinth Area Rates
-2012, having base 100 as on 1/10/2012.

The technical sanctioning Authority may decide non application of cost

index judiciously on the items, where the estimated cost of the item is
close to the market rate.

8.

I convey my deep appreciation and sincere thanks to Shri B.B. Dhar CE(CSQ),
Shri Mathura Prasad, SE(TAS), Shri P.P. Singh, SE(QA), Shri K.R. Meena, EE-I
(TAS), Shri A.K. Goel EE(QA-I), Shri Chhabilal Singh, AE, Shri S.C. Saxena,
AE, Shri Ram Janam Chaudhary, JE, Shri Vijay Kumar, Chief Estimator, Shri
Vijay Singh, Sr. Drafts Man, Shri Bahal Singh, Sr. Drafts Man and other
officers and staff of TAS unit for sincere efforts made in the preparation of this
document in such a short time. Various field units, who contributed field inputs,
also deserve appreciation for their timely help.

9.

Although due care has been taken to print the DSR- 2014 as correctly as
possible, there is possibility that some errors might have crept in inadvertently.In
case, any error or omission is noticed, it may be brought to the notice of
Superintending Engineer (TAS), CPWD, Room no. 418, A, Nirman Bhawan,
New Delhi 110011 (Telefax. 011-23062339)
Suggestions for improvement are always welcome.

(Mukesh Vij)
Addl. D.G. (TD), CPWD,

VI

ITEMS RELATED TO GREEN BUILDING CONCEPTS

Special emphasis has been given for adoption of green building concept in this DSR 2014,
which will help in the construction of different structures. Several items related to the green
building parameters have been introduced in addition to some existing items. Govt. of India has
also taken measures to adopt green building features in building construction so as to minimize
the consumption of energy during construction stage as well as during occupancy of buildings.
This can be achieved by using low energy consuming materials, lightweight materials, and
thermal insulated materials, advanced building technology with eco-friendly materials, optimum
design, minimizing wastages and minimizing use of water, while ensuring optimum comfort to
the users.
The details of the items are summarized here for implementation and convenience of the users.
Sl. Sub Head
no

Brief nomenclature of items

Item no.

Earth Work

(a) Soil conservation by filling available earth

(b) Fly ash as filling material

2.25
2.37 & 2.38

Concrete

(a) Cement concrete hollow blocks

(b) Plain cement concrete using fly ash

4.8
4.19

R.C.C

(a) Ready mixed design mix concrete for

R.C.C. using fly ash

5.40

Brick Work

Wood Work

(a) Brick work with clay fly ash bricks

(b) Brick work with fly ash lime (FALG) bricks
(c) Brick work with extruded burnt fly ash clay
sewer bricks
(d) Brick work with autoclaved aerated
cement blocks

6.32
6.34

(a) Laminated Veneer Lumber frames of doors/

windows
(b) Laminated Veneer Lumber door shutters

9.2

6.37
6.38

9.6, 9.10 &

9.31
(c) Providing and fixing 4mm thick coir veneer board 9.38
6

Flooring

(a) Crazy marble stone flooring

(b) Crazy ceramic tiles flooring
(c) Turf Paver

11.15
11.44
11.45

Roofing

(a) Mud phaska

(b) Pressed clay tiles on roof
(c) Under deck insulation (thermal insulation with
Resin bonded fibre glass wool & tiles)
(d) Thermal insulation of roofing with exposed
polystyrene
(e) Heat resistant tile on roof
(f) Roof insulation with Rigid Polyurethane foam
(g) Wall insulation with Resin Bonded Fibre
glass wool

12.16 & 12.17

12.20
12.34,12.35 &
12.57
12.36
12.55
12.56,
12.57

VII

Finishing

(a) Distempering with 1st quality Acrylic distemper

having low VOC
(b) Wall painting with Acrylic emulsion paint
having low VOC
(c) Wall painting with Premium Acrylic emulsion
paint having low VOC
(d) Painting with synthetic emulsion paint
having low VOC
(e) Applying priming coat on wood /steel/wall
with primer having low VOC

13.81
13.82
13.83
13.84
13.85

Repairs to
Buildings

(a) Mud Mortar made with local clay good earth

14.24

10

RoadWork

(a) Preparation of sub base of road pavement with

fly ash stabilised soil
(b) Precast lime fly ash concrete blocks

16.51
16.52

11

Sanitary
Installations

(a) Vitreous China water less urinals

(b) Sensor operated urinals

17.79
17.80

13

Water Supply

(a) Battery based, sensor based, pillar cock.

18.84

14

Water Proofing

(a) Brick bat-coba Treatment on roofs

22.7

15

Aluminium
Work

(a) Double glazed aluminium windows

21.10

16

Rain Water
Harvesting

(a) Rain Water Harvesting with PVC pipe and

recharge pits etc.

24.1 to
24.9

17

Structural
Glazing and
ACP

(a) High performance Glass

26.3, 26.4,
26.6

VIII

CONTENTS
SH. No.

NAME OF SUB-HEAD

A.

BASIC RATES

0.1

Hire Charges of Plants

PAGE No.
3

0.2

Labour

0.3

Materials

0.4

Carriage Codes

B.

SUB -HEADS

1.

Carriage of Materials

59

2.

Earth Work

69

3.

Mortars

77

4.

Concrete Work

81

5.

Reinforced Cement

91

56

Concrete 6. Brick Work

107

7.

Stone Work

115

8.

Marble & Granite Work

125

9.

Wood and PVC Work

131

10.

Steel Work

169

11.

Flooring

177

12.

Roofing

191

13.

Finishing

211

14.

Repairs to Building

225

15.

Dismantling & Demolishing

239

16.

Road Work

249

17.

Sanitary Installations

273

18.

Water Supply

293

19.

Drainage

333

20.

Pile Work

349

21.

Aluminium Work

357

22.

Water Proofing

365

23.

Horticulture & Landscaping

375

IX

24.

Rain Water Harvesting & Tubewells

25.

Conservation

383 26.

Structural

389 C.

CEMENT CONSUMPTION STATEMENT

399

D.

BITUMEN CONSUMPTION STATEMENT

435

of
Glazing

and

377
Heritage

Aluminium

Buildings
Composite

Panel

BASIC
RATES

BASIC RATES
0.1 HIRE CHARGES OF PLANTS
Code
No.

0028
0029
0030
0033
0037
0038

Hire charges of Coaltar Boiler 900 to 1400 litres

Hire charges of Concrete Mixer 0.25 to 0.40 cum with
Hopper Hire charges of Diesel Road Roller - 8 to 10 tonne
Production cost of concrete by batch mix plant
Hire charges of Diesel Truck - 9 tonne
Hire charges of Spraying machine including electric
charges Hire charges of Coaltar Sprayer
Hire charges of Barber green, drying, mixing and Asphalt
Plant, with accessories, capacity 30/45 tonne
Pumping charges of concrete including Hire charges of
pump, piping work & accessories etc.
Hire charges of Derrick monkey rope
Hire charges of Pump set of capacity 4000 litres/hour
Vibrator (Needle type 40 mm)
Machine for rubbing of floors
Front end loader capacity 1.00 cum
Hire and running charges of Tripod and Mechanical Winch
machine complete with power unit and accessories
Mastic Cooker
Hire and running charges of tipper
Hire and running charges of
loader Hand Grinder for mirror
polish
Hydraulic Excavator (3D) with driver and
fuel Pin vibrator
Surface Vibrator
Hot Bitumen Mixer 0.5 cum i/c hand cart
Hire and running charges of hydraulic piling rig with power
unit etc. including complete accessories and shifting at site
Hire and running charges of light crane
Hire and running charges of bentonite pump
Hire and running charges of vibrating pile driving
hammer complete with power unit and accessories
Hire and running charges of crane 20 tonne
capacity Carriage of concrete by transit mixer
Generator 250 KVA
Paint applicator
Mobile crane
Tractor with ripper attachment

0039

Tractor with trolley

0040

Air compressor 250 cfm with two leads for pneumatic

cutters / hammers

0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027

Unit

Rate `

Description

day
830.00
day
800.00
day
1500.00
cum
350.00
day
1700.00
day
250.00
day
300.00
day

7700.00

cum
day
day
day
day
day
5000.00

150.00
800.00
600.00
350.00
350.00

day
day
750.00

6000.00
day
1700.00
5000.00

day
day
250.00

day
8000.00

day
350.00
400.00

day
day
4000.00

day
34000.00
2200.00
4200.00
day
day
km/cum
day
day

day
day

35000.00
9300.00
30.00
2300.00
750.00

d
a

y
day

7000.00 day

1500.00

BASIC RATES : 0.1 HIRE CHARGES OF PLANTS

1350.00
day

2000.00

Code
No.

0041
0042
0043
0045
0046
0047
0048

0049
0050
0051
0052
0053
0054
0055
0056
0057
0058
0059
0060
0061
0062
0063
0064
0065
0066
0068
0069
0070
0071
0075
0076
0080

0081

Description

Unit

Rate `

Joint cutting machine with 2-3 blades

day

1100.00

C.C .batch mix plant

day

10000.0

Road sweeper

day

0 550.00

Slip form paver with sensor

day

13000.0

Water tanker 5000 litre

day

Concrete joint cutting machine

day

1000.00

Texturing machine

day

900.00

Note :- Above hire - charges include cost of services

of operating staff and supply of lubricating oil.

925.00

Dozer D-80-A 12

hour

Motor Grader 3.35 metre blade

hour

1750.00

Hydraulic Excavator of 1 cum bucket

hour

2450.00

Front end loader 1 cum bucket capacity (incl POL)

hour

1200.00

tonne km

900.00

Tipper -5 Cum
Vibratory roller 8 to 10 tonne

hour

3.00

Smooth Wheeled Roller 8 to 10 tonne

hour

1300.00

Tandem Road Roller

hour

450.00

Water Tanker 5 to 6 KL capacity

hour

1150.00

Air compressor

hour

150.00

Wet Mix Plant 60 TPH

hour

325.00

Mechanical Broom Hydraulic

hour

1200.00

Emulsion Pressure Distributor @ 1750 sqm per

hour

360.00

hour Hot mix Plant -120 TPH capacity

hour

800.00

Hot mix Plant 100 TPH Capacity

hour

23700.0

Paver finisher Hydrostatic with sensor control 100

hour

TPH Paver finisher Mechanical 100 TPH

hour

17500.0

Batching and Mixing Plant @ 75 cum per hour

hour

Concrete Paver finisher with 40 HP Motor and

hour

2700.00

sensor Generator 250 KVA

hour

1000.00

Generator 100 KVA/125 KVA

hour

2500.00

tonne km

2900.00

hour

700.00

Truck 5.5 cum/ 10 tonnes

Road sweeper (Mechamical Broom) @ 1250 sqm per hour
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per
hour actual output

500.00
hour

Hire and running charges of drill machine up to 400 mm

dia (including cost of mobile oil, diesel consumption in
ordinary soil and operator)

day

Pile Integrity testing equipment

day

3.00
360.00
14000.00

7500.00

3000.00

BASIC RATES : 0.1 HIRE CHARGES OF PLANTS

Code
No.

0082

0083

Description

Unit

Rate `

Excavation of Diaphragm wall by Mechanical Grab

sqm

1500.00

Note :- Above hire - charges (from item code 0049 to 0082) include
cost of services of operating staff, supply of lubricating oil and
diesel also.
Hire charges of TATA 407 or equivalent for local shifting.

Day

1300.00

BASIC RATES : 0.1 HIRE CHARGES OF PLANTS

BASIC RATES
0.2 LABOUR
Note :- These rates are exclusive of contractors profit and over heads and are inclusive of wages for
weekly day of rest
Code
No.

Description

Unit

Rate `

Bandhani

day

363.00

Bhisti

day

363.00

Blacksmith 1 st class

day

435.00

Blacksmith 2nd class

day

399.00

Carpenter 1 st class

day

435.00

Carpenter 2nd class

day

399.00

Chowkidar

day

329.00

Beldar

day

329.00

Coolie

day

329.00

Fitter (grade 1)

day

435.00

Assistant Fitter or 2nd class Fitter

day

399.00

Glazier

day

399.00

Mason (for plaster of paris work) 1 st class

day

435.00

Mason (brick layer) 1 st class

day

435.00

Mason (brick layer) 2nd class

day

399.00

Mason (for plain stone work) 2nd class

day

399.00

Mason (for ornamental stone work) 1 st class

day

435.00

0127

Driver (for Road Roller, Concrete Mixer, Truck

etc.)

day

435.00

0128

day

363.00

Mate

0130

day

435.00

Mistry

0131

day

399.00

Painter

0132

day

329.00

Rock Excavator

0133

day

329.00

Rock Breaker

0134

day

329.00

Rock Hole Driller

0135

day

363.00

Stone Chiseller

0138

day

363.00

Sprayer (for bitumen, tar etc.)

0139

day

363.00

Skilled Beldar (for floor rubbing etc.)

0141

day

363.00

White Washer

0155*
0156*
0157

Mason (average)
Carpenter
(average)
Operator (Pile/ Special machine)

day

day
417.00 day
417.00
435.00

0100
0101
0102
0103
0111
0112
0113
0114
0115
0116
0117
0119
0122
0123
0124
0125
0126

BASIC RATES : 0.2 LABOUR

Code
No.

0159
0160
0161

Description

Skilled torch operator for laying tack

Technician
Helper (Technician)
Note :- * These rates are average of 1st class and 2nd class
categories. This is for use in the analysis of rate only.

BASIC RATES : 0.2 LABOUR

Unit

Rate `

day

day
435.00 day
700.00
329.00

BASIC RATES
0.3 MATERIALS
Note : These rates are exclusive of contractors profit, over heads and carriage but include octroi,
royalty, sales tax (VAT) etc.
Code
No.

0222
0223
0224
0225
0226
0227
0228
0229
0230
0231
0232
0233
0234
0235
0236
0237
0285
0286
0287
0291
0292
0293
0294
0295
0296
0297
0298
0302

Description

Seam bolts and nuts 6 mm dia and 25 mm long

Fibre (high impact poly propelene reinforced) cement
corrugated sheet 6 mm thick
Fibre (high impact poly propelene reinforced) cement close
fitting adjustable ridge
Fibre (high impact poly propelene reinforced) cement
corrugate serrated adjustable ridge
Fibre (high impact poly propelene reinforced) cement plain
wing adjustable ridge
Fibre (high impact poly propelene reinforced) cement
unserrated adjustable ridge for hips
Fibre (high impact poly propelene reinforced) cement
corrugated apron piece
Fibre (high impact poly propelene reinforced) cement eaves
filler piece
Fibre (high impact poly propelene reinforced) cement north
light curves
Fibre (high impact poly propelene reinforced) cement
ventilator curves
Fibre (high impact poly propelene reinforced) cement barge
boards boards 6 mm thick
Fibre (high impact poly propelene reinforced) cement ridge finial
Fibre (high impact poly propelene reinforced) cement special
north light curves
Fibre (high impact poly propelene reinforced) cement S type
louvers
Multi purpose fibre (high impact poly propelene reinforced)
cement board 6 mm thick
Multi purpose fibre (high impact poly propelene reinforced)
cement board 8 mm thick
Brick Aggregate (Single size) : 63 mm nominal size
Brick Aggregate (Single size) : 50 mm nominal size
Brick Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 63 mm nominal size
Stone Aggregate (Single size) : 50 mm nominal size
Stone Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 25 mm nominal size
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 12.5 mm nominal
size Stone Aggregate (Single size) : 10 mm nominal
size Stone Aggregate (Single size) : 06 mm nominal
size

Safeda ballies 125 mm

diameter

Unit
Rate `

10 Nos
40.00
sqm
250.00
metre
210.00

metre

300.00

metre

225.00

each

175.00

metre

310.00

each

418.00

metre
210.00
metre
210.00

sqm

210.00

metre

418.00 pair

165.00

each

560.00 each

260.00

sqm
cum
cum
cum
cum
1050.00
1050.00
1050.00
1050.00
1175.00
1175.00
1175.00
1140.00
metre

260.00
600.00
600.00
600.00
cum
cum
cum
cum
cum
cum
cum
42.00

BASIC RATES : 0.3 MATERIALS

Code
No.

0303
0304
0305
0308
0309
0310
0312
0313
0314
0316
0317
0318
0319
0322
0323
0324
0325
0326
0328
0332
0336
0339
0341
0346
0347
0348
0349
0362
0364
0365
0367
0368
0369
0370
0371
0373
0374
0378
0379
0380
0381

Description

Cowdung
Bajri
Bamboo 25 mm dia 2.5 metre long
Bhusa
Paving bitumen of grade VG-10 of approved
quality Bitumen emulsion
Bitumen grade PMB - 40
Blown type petroleum bitumen of penetration 85/25 of approved
quality Bitumen hot sealing compound : grade A
Bitumen solution primer of approved
quality Premoulded joint filler 12 mm thick
Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade
I Bitumen felt as per IS 7193 Grade II
Bitumen felt :Type 3 grade 1
Separation Membrane of impermeable plastic sheeting 125 micron
thick Coal Tar
Blasting powder
Blasting fuse (fuse wire)
White face insulating board:12 mm thick
Natural colour insulating board:12 mm thick
Flame retardant face insulating board: 12 mm thick
Flame retardant face insulating, Impregnated fibre board 12 mm thick
Flat pressed 3 layer particle board (medium density) Grade
1, 12 mm thick
Extra for veneered particle board with Teak veneering on
one side and commercial veneering on other side
Extra for veneered particle board with Commercial veneering
on both sides
Extra for veneered particle board with Teak veneering both
sides Curing compound
Brick bats
Wire brush
Soft brush
Portland Cement
White Cement
Plastic sheath,1.25 mm thick for dowel bars
Coal (steam)
Sealant primer
Cramp Gun metal 25x6x300 mm
Pre moulded Joint filler, 25 mm thick for expansion joint.
Brass butt hinges (light/ordinary type) : 125x70x4 mm
Brass butt hinges (light/ordinary type) : 100x70x4 mm
Brass butt hinges (light/ordinary type) : 75x40x2.5 mm
Brass butt hinges (light/ordinary type) : 50x40x2.5 mm

Unit

cum
cum
score
quintal
tonne
tonne
tonne
tonne
kilogram
litre
sqm
sqm
sqm
sqm
sqm
litre
kilogram
each
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
litre
cum
each
each
tonne
tonne
sqm
quintal
kg
each
sqm
10 Nos
10 Nos
10 Nos
10 Nos

Rate `

48.00
1150.00
350.00
500.00
50600.0
0
39040.0
0
59000.0
0
49600.0
0 28.00
50.00
350.00
70.00
80.00
70.00
12.00
30.00
35.00
15.00
360.00
280.00
320.00
350.00
330.00
270.00
180.00
500.00
50.00
500.00
20.00
18.00
6300.00
14000.0
0 30.00
400.00
125.00
80.00
500.00
860.00
720.00

4
BASIC RATES : 0.3 MATERIALS

50.00

200.0

Code
No.

0382
0383
0384
0385
0386
0387
0388
0389
0390
0391
0392
0393
0394
0400
0401
0402
0403
0404
0405
0406
0408
0409
0410
0411
0412
0413
0414
0417
0418
0419
0420
0421
0422
0423
0424
0425
0426
0427
0428

Description

Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg)

Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg)
Brass butt hinges (heavy type) :75x65x4.0 mm(0.20 kg)
Brass parliamentary hinges 150x125x27x5 mm
Brass parliamentary hinges 125x125x27x5 mm
Brass parliamentary hinges 100x125x27x5 mm
Brass parliamentary hinges 75x100x20x3.2 mm
Brass single acting spring hinges 150 mm
Brass single acting spring hinges 125 mm
Brass single acting spring hinges 100 mm
Brass double acting spring hinges 150 mm
Brass double acting spring hinges 125 mm
Brass double acting spring hinges 100 mm
Brass tower bolt (barrel type) 250x10 mm
Brass tower bolt (barrel type) 200x10 mm
Brass tower bolt (barrel type) 150x10 mm
Brass tower bolt (barrel type) 100x10 mm
Brass flush bolt 250 mm
Brass flush bolt 150 mm
Brass flush bolt 100 mm
Brass handles 125 mm with plate 175x32 mm
Brass handles 100 mm with plate 150x32 mm
Brass handles 75 mm with plate 125x32 mm
Brass door latch 300x16x5 mm (0.380 kg)
Brass door latch 250x16x5 mm (0.350 kg)
Brass mortice latch and lock 100x65 mm with 6 levers and a
pair of brass lever handles
Brass mortice latch 100x65mm with a pair of brass lever
handles Brass 150 mm floor door stopper (0.357kg)
Brass hard drawn hooks and eyes 300
mm Brass hard drawn hooks and eyes
250 mm Brass hard drawn hooks and
eyes 200 mm Brass hard drawn hooks
and eyes 150 mm Brass hard drawn
hooks and eyes 100 mm Brass casement
window fastener
Brass casement stays (straight peg type) 300 mm weighing not
less than 0.33 kg
Brass casement stays (straight peg type) 250 mm weighing not
less than 0.2]8 kg
Brass casement stays (straight peg type) 200 mm weighing not
less than 0.24 kg
Brass quadrant stays 300 mm
Brass fanlight catch

Unit

Rate `

10 Nos
3300.00 10 Nos
2800.00 10 Nos
1000.00 10 Nos
2950.00 10 Nos
2600.00 10 Nos
2400.00 10 Nos
1800.00 each
320.00 each
280.00 each
180.00 each
520.00 each
380.00 each
330.00 each
240.00 each
190.00 each
150.00 each
100.00 each
150.00 each
130.00 each
90.00 each
150.00 each
140.00 each
110.00 each
180.00 each
170.00
each
each
each

390.00
330.00
170.00
10 Nos
750.00 10 Nos
700.00 10 Nos
645.00 10 Nos
620.00 10 Nos
525.00 each
60.00

each

145.00

each

120.00

each
each
10Nos

110.00
125.00
175.00

10

BASIC RATES : 0.3 MATERIALS

Code
No.

0429
0430
0431
0432
0433
0438
0442
0444
0445
0446
0447
0449
0450
0451
0452
0453
0524
0525
0526
0527
0528
0555
0556
0557
0558
0568
0569
0570
0571
0583
0584
0585
0586
0587
0588
0589
0590
0591
0592

Description

Brass fanlight pivot

Brass chain with hook for fan light catch
Brass hasps and staples (safety type) 150 mm
Brass hasps and staples (safety type) 115 mm
Brass hasps and staples (safety type) 90 mm
Brass night latch
Brass helical spring 150 mm
Brass curtain rod 20 mm dia 1.25 mm thick
Brass curtain rod 25 mm dia 1.25 mm thick
Brass brackets (curtain rods) 20 mm
Brass cupboard knob or wardrobe knob 50
mm Brass screws 50 mm
Brass screws 40 mm
Brass screws 30 mm
Brass screws 25 mm
Brass screws 20 mm
Chromium plated Brass butt hinges (heavy) type 75x65x4
mm (200gms)
Chromium plated Brass butt hinges (light/ordinary) type 125x70x4mm
Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm
Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5
mm Chromium plated Brass butt hinges (light/ordinary) type
50x40x2.5 mm Chromium plated Brass handles 125 mm with plate
175 x32 mm Chromium plated Brass handles 100 mm with plate 150
x 32 mm Chromium plated Brass handles 75mm with plate 125x32
mm
Chromium plated Brass mortice latch and lock 100x65 mm with 6
levers and a pair of brass lever handles
Chromium plated brass casement window fastener
Chromium plated Brass casement stays (straight peg type) 300
mm weighing not less than 0.33 kg
Chromium plated Brass casement stays (straight peg type) 250
mm weighing not less than 0.28 kg
Chromium plated Brass casement stays (straight peg type) 200
mm weighing not less than 0.24 kg
Chromium plated Brass Night latch
Chromium plated Brass Wardrobe Knob 50 mm
Chromium plated Brass screws 50 mm
Chromium plated Brass screws 40 mm
Chromium plated Brass screws 30 mm
Chromium plated Brass screws 25 mm
Chromium plated Brass screws 20 mm
Chromium plated Brass curtain rod 12 mm dia 1.25mm
thick Chromium plated Brass curtain rod 20 mm dia
1.25mm thick

Chromium plated Brass

curtain rod 25 mm dia
1.25mm thick

Unit
Rate `

1
0
N
o
s
1
9
5.
0
0
e

ach
40.00 10 Nos
800.00 10 Nos
670.00
10 Nos
570.00 each
500.00 each
310.00
metre
115.00 metre
135.00 each
42.00 each
35.00 100 Nos
220.00 100 Nos
170.00 100 Nos
140.00 100 Nos
100.00 100 Nos
95.00
10 Nos
10Nos

each

1000.00 10 Nos
460.00 10Nos
each

850.00 10Nos
200.00 each
175.00 each

700.00
200.00
150.00

each

600.00 each

100.00

170.00

BASIC RATES : 0.3 MATERIALS

each

140.00

each
each
each

125.00
550.00
50.00
100 Nos
250.00 100Nos
220.00 100 Nos
160.00 100 Nos
125.00 100 nos
100.00 metre
200.00 metre
260.00
metre
370.00

11

Code
No.

0594
0595
0596
0597
0608
0635
0637
0638
0639
0640
0641
0642
0643
0644
0645
0646
0647
0648
0649
0650
0651
0652
0653
0654
0655
0656
0660
0661
0662
0663
0664
0665
0666
0667
0668
0669
0670
0679
0680

Description

Bright finished or black enameled mild steel butt hinges

125x65x2.12 mm
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
75x47x1.70 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Nickel plated bright finished mild steel piano hinges 1 mm thick
25 mm wide
Bright finished or black enameled mild steel screws 50
mm Bright finished or black enameled mild steel screws
40 mm Bright finished or black enameled mild steel
screws 30 mm Bright finished or black enameled mild
steel screws 25 mm Bright finished or black enameled
mild steel screws 20 mm
Bright finished or black enameled mild steel bolts and nuts 50x6
mm Oxidised mild steel butt hinges 125x65x2.12 mm
Oxidised mild steel butt hinges 100x58x1.90 mm
Oxidised mild steel butt hinges 75x47x1.70 mm
Oxidised mild steel butt hinges 50x37x1.50 mm
Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm
Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm
Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm
Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm
Oxidised mild steel single acting spring hinges 150 mm
Oxidised mild steel single acting spring hinges 125 mm
Oxidised mild steel single acting spring hinges 100 mm
Oxidised mild steel double acting spring hinges 150 mm
Oxidised mild steel double acting spring hinges 125 mm
Oxidised mild steel double acting spring hinges 100 mm
Nickel plated mild steel piano hinges 1 mm thick 35 mm wide
Oxidised mild steel sliding door bolt 300x16 mm
Oxidised mild steel sliding door bolt 250x16 mm
Oxidised mild steel door latch 300x20x6 mm
Oxidised mild steel door latch 250x20x6 mm
Oxidised mild steel tower bolt (barrel type) 250x10
mm Oxidised mild steel tower bolt (barrel type)
200x10 mm Oxidised mild steel tower bolt (barrel
type) 150x10 mm Oxidised mild steel tower bolt
(barrel type) 100x10 mm Oxidised mild steel handles
125 mm
Oxidised mild steel handles 100 mm
Oxidised mild steel handles 75 mm
Oxidised mild steel hasps and staples (safety type) 150 mm

Oxidised mild steel hasps

and staples (safety type)
115 mm

Unit
Rate `

10 Nos
metre

10 Nos
145.00
10 Nos
90.00
10 nos
65.00

12

55.00

42.00 100 Nos

68.00 100 nos
52.00
100 nos
42.00 100 Nos
38.00 100 Nos
32.00 each
8.00 10 Nos
150.00 10 Nos
95.00 10 Nos
70.00 10 Nos
60.00 10 Nos
350.00 10 Nos
325.00 10 Nos
240.00 10 Nos
220.00 each
120.00 each
110.00 each
90.00 each
115.00 each
120.00 each
95.00 metre
50.00 each
100.00 each
95.00 each
50.00 each
42.00 each

48.00 each
42.00 each
32.00 each
27.00 each
20.00 each
18.00 each
16.00 10 Nos
130.00
10 Nos
110.00

BASIC RATES : 0.3 MATERIALS

Code
No.

0681
0682
0683
0684
0685
0686
0687
0688
0689
0690
0691
0692
0693
0694
0696
0697
0698
0699
0700
0701
0702
0703
0704
0705
0706
0713
0714
0715
0717
0718
0719
0752
0753
0754
0755

Description

Oxidised mild steel hasps and staples (safety type) 90 mm

Oxidised mild steel screws 50 mm
Oxidised mild steel screws 40 mm
Oxidised mild steel screws 30 mm
Oxidised mild steel screws 25 mm
Oxidised mild steel screws 20 mm
Anodised Aluminium butt hinges 125x75x4 mm
Anodised Aluminium butt hinges 125x63x4 mm
Anodised Aluminium butt hinges 100x75x4 mm
Anodised Aluminium butt hinges 100x63x3.2 mm
Anodised Aluminium butt hinges 100x63x4 mm
Anodised Aluminium butt hinges 75x63x4 mm
Anodised Aluminium butt hinges 75x63x3.2 mm
Anodised Aluminium butt hinges 75x45x3.2 mm
Anodised Aluminium sliding door bolt 300x16 mm
Anodised Aluminium sliding door bolt 250x16 mm
Anodised Aluminium tower bolt (barrel type) 300x10
mm Anodised Aluminium tower bolt (barrel type)
250x10 mm Anodised Aluminium tower bolt (barrel
type) 200x10 mm Anodised Aluminium tower bolt
(barrel type) 150x10 mm Anodised Aluminium tower
bolt (barrel type) 100x10 mm
Anodised Aluminium handles 125 mm with plate 175 x 32
mm Anodised Aluminium handles 100 mm with plate 150 x 32
mm Anodised Aluminium handles 75mm with plate 125 x 32
mm Anodised Aluminium kicking plate 50 cm long 100x3.15
mm
Block board construction flush door with teak wood ply on both
faces 35 mm thick
Block board construction flush door with teak wood ply on both
faces 30 mm thick
Block board construction flush door with teak wood ply on both
faces 25 mm thick
Block board construction flush door with commercial ply on
both faces 35 mm thick
Block board construction flush door with commercial ply on
both faces 30 mm thick
Block board construction flush door with commercial ply on
both faces 25 mm thick
Block board construction flush door lipping
Square vision panel in Block board construction flush door
Circular vision panel in Block board construction flush door
Decorative type louvers in Block board construction flush door

Unit

Rate `

10 Nos
100 Nos
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each

80.00
80.00
65.00
50.00
50.00
38.00
590.00
540.00
530.00
520.00
520.00
510.00
490.00
400.00
170.00
135.00
775.00
630.00
495.00
395.00
315.00
520.00
395.00
335.00
135.00

sqm

1800.00

sqm

1600.00

sqm

1500.00

sqm

1200.00

sqm

1050.00

sqm
sqm of
door area
sqm of
door area
sqm of
door area
sqm of
door area

960.00
315.00
120.00
195.00
325.00

BASIC RATES : 0.3 MATERIALS

13

Code
No.

0757
0759
0761
0763
0765
0768
0769
0770
0771
0773
0775
0776
0777
0784
0785
0788
0801
0802
0803
0804
0805
0806
0807
0808
0809
0810
0811
0815
0816
0818
0820
0821
0823
0824
0826
0827
0828

Description

Rebate cutting in block board construction flush door

Decorative plywood 4
mm Fuel wood
Glue
Hessian cloth
Cement Concrete Jali 50 mm
thick Cement Concrete Jali 40
mm thick Cement Concrete Jali
25 mm thick Kerosene oil
Unslaked lime
Dehradun white lime
Satna lime
Dry hydrated lime (factory made)
Marble dust/ powder
Marble chips up to 4 mm and down size White & black
Marble chips large size above 4 mm White & black
Silicon and acrylic emulsion
Acrylic distemper 1st quality , having VOC content less than
50 grams/ litre
Acrylic emulsion, having VOC content less than 50 grams/ litre
Premium acrylic emulsion of interior grade, having VOC
content less than 50 grams/ litre
Synthetic enamel paint , having VOC (Volatile Organic
Compound) content less than 150 grams/ litre
Ready mixed pink or grey primer on wood work (hard and
soft wood) having VOC content less than 50 grams/ litre
Ready mixed red oxide zinc chromatic on steel/ iron work,
having VOC content less than 250 grams/ litre
Water thinnable cement primer for interior wall surface,
having VOC content less than 50 grams/ litre
Exterior primer
Moorum
Mud (dry)
Dry distemper
Oil bound washable distemper/ Acrylic distemper
Linseed oil (double boiled)
Cement primer
Distemper primer
Pink primer (for
wood)
White cement based putty
Aluminium paint
Acid proof paint (chocolate or black)
Anticorrosive bituminous paint (black)

Unit

sqm of
door area
sqm
quintal
kilogram
sqm
sqm
sqm
sqm
litre
quintal
quintal
quintal
quintal
cum
quintal
quintal
litre
Kg
litre

Rate `

90.00
430.00
525.00
70.00
45.00
210.00
180.00
150.00
48.00
300.00
650.00
500.00
230.00
1000.0
0
220.00
210.00
200.00
40.00
250.00

litre
350.00
litre
220.00
litre
125.00
litre
130.00
litre
kilogram
cum
cum
kilogram
kilogram
litre
litre
litre
litre
kg
litre
litre
litre

80.00
40.00
450.00
65.00
36.00
55.00
120.00
115.00
90.00
90.00
24.00
160.00
200.00
115.00

14

BASIC RATES : 0.3 MATERIALS

Code
No.

0829
0830
0831
0833
0834
0835
0845
0850
0851
0855
0856
0857
0858
0859
0863
0865
0868
0869
0870
0873
0874
0875
0876
0886
0966
0967
0969
0973
0974
0975
0976
0977

0978
0979
0980
0982
0983
0992

Description

Black Japan paint

Enamel paint
Floor enamel paint in all shades except green
Synthetic enamel paint in black or chocolate shade
Synthetic enamel paint in all shades except black or chocolate
shade
Plastic emulsion paint
Roofing paint for iron sheets in red
colour White lead0
Water proofing cement paint
Wax polish (ready made)
Ordinary varnish
Superior copal varnish
Superior spar varnish
Oil type wood
preservative Putty for
wood work
Pig lead
Premixed super white gypsum plaster.
Plaster of Paris
Plug
Copper pins 6 mm dia 7.5 cm long
Black colour dark shade pigment
Red, chocolate, orange, buff or yellow (red oxide of iron)
light shade pigment
Green or blue medium shade pigment
Standard holder bat clamps for sand cast iron or cast iron
pipes 150 mm dia
Sand Cast iron plain shoe 150 mm dia
Copper plate
Pulley 25 mm dia
Rolling shutter made of 80x1.25 mm machine rolled laths
Top cover for rolling shutters 1.25 mm thick
27.5 cm long wire spring grade No. 2 for rolling
shutters Ball bearing for rolling shutters
Extra for mechanical devices chain and cranked operation for
operating rolling shutters: exceeding 10.00 sqm and up to
16.80 sqm area of door
Extra for mechanical devices chain and cranked operation
for operating rolling shutters: exceeding 16.80 sqm area of
door
Royalty for good earth
Royalty for sludge
Coarse sand (zone
III) Fine sand (zone
IV)

Galvani
sed
steel
plain
sheets

Unit

litre litre
litre litre
litre litre
litre
kilogram
kilogram
kilogram litre
litre litre
litre
kilogram
kilogram kg
kilogram each
each kilogram
kilogram
kilogram
each each
kilogram each
sqm metre
each each

sqm
sqm cum
cum cum
cum
quintal

Rate `

1
0
0
.
0
0

210.00 145.00 180.00

160.00 210.00 130.00 150.00 45.00 260.00 100.00
190.00 190.00 150.00 30.00 120.00 7.00 4.50.00 12.00
11.00 55.00

3
3
0.
0
0

75.00 70.00

600.00
30.00
90.00
1200.00
700.00
5350.00

600.00
30.00 310.00 270.00 40.00 1300.00 620.00 280.00

BASIC RATES : 0.3 MATERIALS

15

Code
No.

0994
0996
0999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1013
1015
1019
1020
1021
1022
1023
1024
1025
1028
1029
1030
1031
1032
1034
1035
1036
114
3
114
5
114
9
115
1
115

4 1157
1158

Descript
ion

S
t
a
n
d
a
r
d
q
u
a
l
i
t
y
h
a
r
d
b
o
a
r
d
s
h
e
e
t
3
m
m
t
h
i
c
k

S
t
a
n
d
a
r
d
q
u
a
l
i
t
y
h
a
r
d
b
o
a
r
d
s
h
e
e
t
4
.
5
m
m
t
h
i
c

k
S
h
e
l
l
a
c
S
p
i
r
i
t
S
p
u
n
y
a
r
n
M
i
l
d
s
t
e
e
l
r
o
u
n
d
b
a
r
1

2 mm dia and below Mild steel round bar

above 12 mm dia
Average rate of Mild steel round bars for
reinforcement Twisted steel/ deformed bars
Mild steel square bars
Structural steel such as tees, angles channels and R.S. joists
Flats up to 10 mm in thickness
Flats exceeding 10 mm in thickness
Mild steel plates
Steel glazed door,window/ ventilator, all members viz. F7D,
F4B, K11 and K12B etc.
Mild steel sheets for tanks
Mild steel expanded metal 20x60 mm strands
Mild steel hooks
Mild steel rivets
Hard drawn steel wire fabric
Galvanised steel bolts & nuts 6 mm dia and 25 mmlong
round head with slots
Galvanised steel J or L hooks 8 mm dia
Galvanised steel bolts & nuts 10 mm dia and 125 mm long
round head with slots
Mild steel bolts 6 mm dia and 25 mm long with hexagonal head
Straining bolts
Galvanised steel barbed wire
Galvanised steel turn buckles
Galvanised steel bolts & nuts 10 mm dia and 27 cm long both
sides threaded with 4 galvanised steel nuts
Galvanised steel bolts 10 mm dia and 7 cm long with nuts
Bolts and nuts up to 300 mm in length
Bolts and nuts above 300 mm in length
Iron pintels including welded pin
Steel beading
Aluminium Plain Strip edging 38x12x3 mm
Glass strip 4 mm thick 40 mm deep
Boundary stone top chisel dressed 15x15x90 cm
Through and bond stone
Stone for masonry work
Stone for pitching 15 cm x 22.5 cm

Unit

Rate `

sqm
sqm
kilogram
litre
kilogram
quintal
quintal
quintal
quintal
quintal
quintal
quintal
quintal
quintal

125.00
150.00
3000.0
0 70.00
40.00
4500.0
0
4400.0
0
4500.0
0
4759.0
0
4500.0
0
4636.0
0
4200.0
0
4300.0
0
4500.0
0

kg
quintal
sqm
each
quintal
sqm
10 Nos
10 Nos
each
10 Nos
each
quintal
each
each
each
quintal
quintal
each
metre
metre
metre
each
100 Nos
cum
cum

52.00
5000.0
0
300.00
35.00
5200.0
0
440.00
25.00
120.00
12.00
30.00
70.00
5200.0
0 19.00
25.00
20.00
5600.0
0

16

800.00 40.00 27.00 100.00 20.00 70.00 1300.00 900.00

450.00

BASIC RATES : 0.3 MATERIALS

Code
No.

7 1198 1199 1200 1201 1202 1203 1204

Descripti
on

115
9
116
0
116
1
116
3
116
4
116
5
116
6
116
8
116
9
117
4
117
5
117
7
117
9
118
2
118
6

1207 1208 1209 1210 1211 1213 1214 1215 1216 1219 1220
1221

Stone
dust
R
e
d

118
7
118
8
118
9
119
0
119
4
119
6
119

s
a
n
d
s
t
o
n
e
b
l
o
c
k
W
h
i
t
e
s
a
n
d
s
t
o
n
e
b
l
o
c

k
W
h
i
t
e
s
a
n
d
s
t
o
n
e
s
l
a
b
7
5
m
m
t
h
i
c
k
(
u
n
d
r
e
s
s
e
d

)
R
e
d
s
a
n
d
s
t
o
n
e
s
l
a
b
4
0
m
m
t
h
i
c
k
(
u
n
d
r
e
s
s
e

d) White sand stone slab 40 mm thick (undressed) Red sand stone slab 30 mm thick (undressed)
Kota stone slab 20 mm to 25 mm thick (semi-polished)
Kota stone slab 25mm thick (rough chiseled)
Red sand stone slab 45 mm to 50 mm thick (un-dressed)
White sand stone slab 45 mm to 50 mm thick (un-dressed)
Stone grit 6 mm and down size or pea sized gravel
Crushed stone 2.36 mm to 12.5 mm size
Surkhi
Superior class teak wood such as Dandeli, Balarshah or
Malabar in planks
First class teak wood in scantling
First class teak wood in planks
Second class teak wood in scantling
Second class teak wood in planks
Second class deodar wood in planks
First class kail wood in planks
Second class kail wood in scantling
Second class kail wood in planks
Sal wood in scantling
Kiln seasoned selected sheesham wood planks
Precast terrazzo tiles 22 mm thick (light shade)
Precast terrazzo tiles 22 mm thick(medium shade)
Precast terrazzo tiles 22 mm thick (dark shade)
Precast heat resistant terrace tiles (size 300x300 mm) and
20 mm thick
G.I. Limpet washer
Bitumen washer
G.I. plain washer thick
G.I. plain washer thin
G.I. plain washer for seam bolts
Water proofing materials
Welding by gas plant
Welding by electric plant
Whiting
Wire nails
Wire mesh (rabbit)
20 mm dia holding down bolts

BASIC RATES : 0.3 MATERIALS

Unit

Rate `

cum
10 cudm
10 cudm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
cum
cum
cum

1100.00
65.00
70.00
350.00
180.00
200.00
200.00
300.00
290.00
175.00
220.00
1140.00
1100.00
700.00

10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
sqm
sqm
sqm

1100.0
0
880.00
850.00
660.00
750.00
500.00
310.00
260.00
260.00
530.00
650.00
350.00
300.00
300.00

sqm
100 nos
100 Nos
100 Nos
100 Nos
100 Nos
kilogram
cm
cm
quintal
kilogram
sqm
quintal

467.00
35.00
30.00
35.00
32.00
30.00
35.00
2.00
2.00
600.00
65.00
45.00
6000.00

17

Code
No.

1222
1224
1225
1227
1228
1229
1231
1234
1235
1237
1238
1239
1240
1241
1242
1243
1244
1245
1301
1304
1305
1307
1309
1314
1315
1330
1331
1332
1334
1335
1336
1337
1339
1340
1342
1343
1350
1352
1353
1354
1355

Description

Mild steel sheets with bolts and nuts to rest on pintels

Hard drawn steel wire
Mild steel flat strap fitting
Chequered terrazzo tiles 22 mm thick(light shade)
Chequered terrazzo tiles 22 mm thick(medium
shade) Chequered terrazzo tiles 22 mm thick (dark
shade) Extra for selected planks of second class
teakwood Aluminium Plain Strip edging 57x12x3 mm
Diesel oil
Cutting marble or sand stone slab up to 50 mm thick by
mechanical device
Extra for selected planks of first class teakwood
18 mm thick Flamed finish granite stone slab
18 mm thick Italian Marble stone slab, Perlato (slab area up to
0.5 sqm).
Commercial LPG in cylinder
Glass mossaic tiles (20 mm x 20 mm x 4 mm ).
Tile fixing chemical adhesive
Cement Polymer Grout Compound
Acid for cleaning tiles
Bleaching powder
Surface box for stop cock
Surface box for sluice valve
Surface box for water meter
C.I. bracket for wash basin and sinks
C.P.brass chain with 32 mm dia rubber
plug C.P.brass chain with 40 mm dia
rubber plug
Clamps and M.S. stays including bolts and nuts for 100 mm pipe
M.S.Holder bat clamp of approved design for 100 mm S.C.I.
pipe M.S.Holder bat clamp of approved design for75 mm S.C.I.
pipe Clamps and M.S. stays including bolts and nuts for 50 mm
pipe Clamps and M.S. stays including bolts and nuts for 75 mm
pipe Clearing eye with chain and lid 100 mm dia
Clearing eye with chain and lid 150 mm dia
Brass bib-cock 15 mm dia
Brass bib-cock 20 mm dia
Brass stop-cock 15 mm dia
Brass stop-cock 20 mm dia
Mosquito proof coupling of approved
design C.I. cover and frame 300x300 mm
inside
C.I.cover without frame 300x300 mm inside i/c cover of 4.50
kg Rectangular cover 455x610 mm with frame (low duty)
Rectangular cover 455x610 mm without frame (low duty)

Unit

Rate `

each
quintal
quintal
sqm
sqm
sqm
10 cudm
metre
litre

130.00
5500.00
5000.00
275.00
300.00
260.00
150.00
135.00
55.49

metre
10 cudm
sqm

10.00
150.00
2000.00

sqm
kg
sqm
kg
kg
litre
quintal
each
each
each
pair
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

3600.00
88.00
1200.00
25.00
30.00
18.00
1750.00
125.00
210.00
250.00
70.00
40.00
40.00
35.00
20.00
18.00
28.00
30.00
44.00
50.00
210.00
225.00
210.00
280.00
30.00
300.00
225.00
1500.00
1000.00

18

BASIC RATES : 0.3 MATERIALS

Code
No.

1356
1357
1360
1361
1362
1363
1364
1366
1367
1369
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1392
1396
1397
1464
1466
1468
1470
1472
1532
1533
1534
1535
1540
1541
1542
1543

Description

500 mm dia cover with frame (medium duty)

500 mm dia cover without frame (medium
duty) C.I.mouth, brass ferrule 15 mm dia
C.I.mouth, brass ferrule 20 mm dia
C.l.mouth, brass ferrule 25 mm dia
Vitreous china foot rests 250x130x30 mm
C.I. grating 100x100 mm
C.I. grating 150x150
mm C.I. grating
180x180 mm
S.C.I. gully or nahani grating 100 mm dia
Rubber insertions for 80 mm dia pipe joints
Rubber insertions for 100 mm dia pipe
joints Rubber insertions for 125 mm dia
pipe joints Rubber insertions for 150 mm
dia pipe joints Rubber insertions for 200
mm dia pipe joints Rubber insertions for
250 mm dia pipe joints Rubber insertions
for 300 mm dia pipe joints Rubber
insertions for 350 mm dia pipe joints
Rubber insertions for 400 mm dia pipe
joints Rubber insertions for 450 mm dia
pipe joints Rubber insertions for 500 mm
dia pipe joints Rubber insertions for 600
mm dia pipe joints Mirror of superior make
glass 60x45 cm Vitreous china pedestal for
wash basin
Pig lead
S & S.C.I. standard specials upto 300 mm dia (heavy class)
S & S.C.I. standard specials over 300 mm dia (heavy class)
Flanged C.I. standard specials upto 300 mm dia (heavy
class) Flanged C.I. standard specials over 300 mm dia
(heavy class) Casing pipe 100 mm dia
Flush pipe with union spreaders and clamps all in C.P. brass
for single stall
Flush pipe with union spreaders and clamps all in C.P. brass
for double stall
Flush pipe with union spreaders and clamps all in C.P. brass
for range of three stall
Flush pipe with union spreaders and clamps all in C.P. brass
for range of four stall
Flush pipe and spreaders G.l. for single set of one squatting
plate urinal
Flush pipe and spreaders G.l. for range of two squatting plates urinal
Flush pipe and spreaders G.l. for range of three squatting plates

urinal
Flush
pipe
and
spreade
rs G.l.
for
range of
four
squattin
g plates
urinal

Unit

each each
each each
each pair
each each
each each
each each
each each
each each
each each
each each
each each
each each
kilogram
quintal quintal
quintal quintal
metre
each
each
each
each
each each
each
each

Rate `

4
7
5
0.

00 2300.00 140.00 160.00 220.00 100.00 15.00 25.00 30.00

18.00 15.00 18.00 20.00 20.00 25.00 40.00 45.00 50.00 73.00
92.00 110.00 125.00 310.00 700.00 90.00 3600.00 3700.00
5500.00 5800.00 335.00

BASIC RATES : 0.3 MATERIALS

270.00

600.00

400.00

175.00
250.00
300.00
390.00

520.00

19

Code
No.

1545
1546
1547
1548
1549
1550
1551
1552
1555
1559
1608
1612
1614
1616
1617
1618
1620
1621
1622
1624
1625
1627
1628
1630
1631
1633
1634
1636
1637
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648

Description

G.I. pipes 15 mm
dia G.I. pipes 20
mm dia G.I. pipes
25 mm dia G.I.
pipes 32 mm dia
G.I. pipes 40 mm
dia G.I. pipes 50
mm dia G.I. pipes
65 mm dia G.I.
pipes 80 mm dia
G.I. back (jam) nuts 25 mm
dia G.I. back (jam) nuts 65
mm dia G.I. tees (equal) 25
mm
G.I. tees (equal) 65 mm
G.I. inlet connection
S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
75 mm dia
S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
100 mm dia
S.C.I. soil, waste and vent single socketed pipe1.80 metres long:
150 mm dia
S.C.I. plain bend 75 mm dia
S.C.I. plain bend 100 mm dia
S.C.I. plain bend 150 mm dia
S.C.I. bend with access door 75 mm dia
S.C.I. bend with access door 100 mm dia
S.C.I. plain single equal junctions 75x75x75 mm dia
S.C.I. plain single equal junctions 100x100x100 mm dia
S.C.I. single equal junctions 75x75x75 mm dia with access door
S.C.I. single equal junctions 100x100x100 mm dia with access door
S.C.I. plain double equal junctions 75x75x75x75 mm dia
S.C.I. plain double equal junctions 100x100x100x100 mm dia
S.C.I. double equal junctions 75x75x75x75 mm dia with access
door
S.C.I. double equal junctions 100x100x100x100 mm dia
with access door
Slotted cowl (terminal guard ) 75 mm dia
Slotted cowl (terminal guard) 100 mm dia
G.I. Union 15 mm nominal bore
G.I. Union 20 mm nominal
bore G.I. Union 25 mm
nominal bore G.I. Union 32
mm nominal bore G.I. Union
40 mm nominal bore G.I.

U
n
i
o
n
5
0
m
m
n
o
m
i
n
a
l
b
o
r
e
G
.
I
.
U
n
i
o
n
6
5
m
m
n
o
m
i

n
a
l
b
o
r
e
G.I.
Union
80 mm
nominal
bore

20

Unit

metre
metre
metre
each

Rate `

105.00 metre
180.00 metre
365.00 metre
22.00 each

each

950.00

each

1150.00

each
each
each
each

1750.00 each
600.00 each
265.00 each
376.00 each

125.00 metre
220.00 metre
460.00 each
45.00 each
each

170.00 each
200.00 each
450.00 each
346.00 each

160.00
275.00
10.00
280.00
65.00

350.00
252.00
278.00
520.00

each
425.00
each
550.00
each
151.00
each
190.00
each
55.00
each
75.00
each
85.00 each 120.00
each
185.00
each
220.00
each
430.00
each
510.00

BASIC RATES : 0.3 MATERIALS

Code
No.

1649
1653
1656
1659
1662
1666
1667
1669
1670
1672
1673
1674
1677
1682
1683
1685
1686
1687
1688
1689
1690
1693
1700
1701
1702
1703
1704
1705
1706
1707
1709
1710

Description

Polyethylene water storage tank with cover and suitable

locking arrangement
Sand cast iron S&S plain single unequal junctions: 100x100x75
mm dia
Sand cast iron S&S single unequal junctions: 100x100x75 mm
dia with access door
Sand cast iron S&S plain double unequal junctions:100x100x
75x75 mm dia
Sand cast iron S&S double unequal junctions:
100x100x75x75 mm dia with access door
Sand cast iron heel rest bend 75 mm dia
Sand cast iron heel rest bend 100 mm dia
S.C.I. single equal invert branch of required degree 75x75x75 mm
dia
S.C.I. single equal invert branch of required degree
100x100x 100 mm dia
S.C.I. double equal invert branch of required degree
75x75x75x 75 mm dia
S.C.I. double equal invert branch of required degree
100x100x 100x100 mm dia
S.C.I. single unequal invert branch of required degree
100x100x 75 mm dia
S.C.I. double unequal invert branch of required degree
100x100x 75x75 mm dia
S.C.I. door pieces 75 mm dia
S.C.I. door pieces 100 mm dia
S.C.I. collar 75 mm dia
S.C.I. collar 100 mm dia
Unplasticised P.V.C. connection pipe with brass union 30 cm
long 15 mm bore
Unplasticised P.V.C. connection pipe with brass union 30 cm
long 20 mm bore
Unplasticised P.V.C. connection pipe with brass union 45 cm
long 15 mm bore
Unplasticised P.V.C. connection pipe with brass union 45 cm
long 20 mm bore
S.C.I. hand pump
R.C.C. pipes NP2 class 100 mm dia
R.C.C. pipes NP2 class 150 mm dia
R.C.C. pipes NP2 class 250 mm dia
R.C.C. pipes NP2 class 300 mm dia
R.C.C. pipes NP2 class 450 mm dia
R.C.C. pipes NP2 class 500 mm dia
R.C.C. pipes NP2 class 600 mm dia
R.C.C. pipes NP2 class 700 mm dia
R.C.C. pipes NP2 class 800 mm dia
R.C.C. pipes NP2 class 900 mm dia

Unit

per litre

Rate `

5.30

each

370.00

each

400.00

each

550.00

each
each
each
each

550.00
220.00
250.00
320.00

each

410.00

each

410.00

each

550.00

each

495.00

each
each
each
each
each

570.00
275.00
400.00
113.00
143.00

each

30.00

each

35.00

each

35.00

each
each
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre

48.00
670.00
200.00
210.00
260.00
300.00
400.00
580.00
920.00
1050.00
1170.0
0
1280.00

BASIC RATES : 0.3 MATERIALS

21

Code
No.

1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1854
1855
1856
1857
1858
1859
1863
1871
1872
1875
1876
1878
1879
1881
1882

Description

R.C.C. pipes NP2 class 1000 mm dia

R.C.C. pipes NP2 class 1100 mm dia
R.C.C. pipes NP2 class 1200 mm dia
R.C.C. collars NP2 class 100 mm dia
R.C.C. collars NP2 class 150 mm dia
R.C.C. collars NP2 class 250 mm dia
R.C.C. collars NP2 class 300 mm dia
R.C.C. collars NP2 class 450 mm dia
R.C.C. collars NP2 class 500 mm dia
R.C.C. collars NP2 class 600 mm dia
R.C.C. collars NP2 class 700 mm dia
R.C.C. collars NP2 class 800 mm dia
R.C.C. collars NP2 class 900 mm dia
R.C.C. collars NP2 class 1000 mm dia
R.C.C. collars NP2 class 1100 mm dia
R.C.C. collars NP2 class 1200 mm dia
RCC pipe 450 mm dia NP-3 spigot
RCC pipe 600 mm dia NP-3 spigot
RCC pipe 900 mm dia NP-3 spigot
RCC pipe 1000 mm dia NP-3 spigot
RCC pipe 1200 mm dia NP-3 spigot
RCC pipe 1800 mm dia NP-3 spigot
RCC pipe 450 mm dia NP-4 spigot
RCC pipe 600 mm dia NP-4 spigot
RCC pipe 900 mm dia NP-4 spigot
RCC pipe 1000 mm dia NP-4 spigot
RCC pipe 1200 mm dia NP-4 spigot
RCC pipe 1800 mm dia NP-4 spigot
Stoneware pipes grade A (60 cm long) 100 mm
dia Stoneware pipes grade A (60 cm long) 150
mm dia Stoneware pipes grade A (60 cm long)
200 mm dia Stoneware pipes grade A (60 cm
long) 230 mm dia Stoneware pipes grade A (60
cm long) 250 mm dia Stoneware pipes grade A
(60 cm long) 300 mm dia Fire clay kitchen sink:
600x450x250 mm
White vitreous china laboratory sink 450x300x150
mm White vitreous china laboratory sink
600x450x200 mm
White plastic seat (solid) with lid C.P. brass hinges and rubber
buffers Black plastic seat (solid) with lid C.P. brass hinges and
rubber buffers Shower rose C.P. brass for 15 to 20 mm inlet 100 mm
dia
Shower rose C.P.brass for 15 to 20 mm inlet 150 mm
dia Spun yarn

Strainer
brass
40 mm
dia 1.5
metre
long

Unit

metre metre
metre each
each each each
each each each
each each each
each each each
metre metre
metre metre
metre metre
metre metre
metre metre
metre metre
each each each
each each each
each each each
each each each
each kilogram
each

Rate `

1
5
9

22

0.00 1875.00 1925.00 30.00 35.00 50.00 55.00 100.00 115.00

140.00 150.00 200.00 235.00 280.00 300.00 350.00 1496.00
1995.00 3150.00 3885.00 5040.00 9450.00 1733.00 2310.00
4595.00 5565.00 6510.00 13650.00 50.00 80.00 135.00
170.00 220.00 240.00 1350.00 820.00 1525.00 330.00 310.00

5
0.
0
0
6

0.00
50.00
600.00

BASIC RATES : 0.3 MATERIALS

Code
No.

1885
1889
1891
1893
1895
1896
1897
1898
1900
1902
1904
1913
1915
1922
1923
1924
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1940
1941
1942
1943
1944
1945
1947
1949
1950
1951
1952
1953
1954

Description

15 mm C.P. brass tap

C.P. brass toilet paper holder of standard size
C.I. trap for standard urinal with vent arm with operating and
other couplings in C.P. brass: 50 mm dia
C.I. trap for standard urinal with vent arm with operating and
other couplings in C.P. brass: 80 mm dia
C.P. brass trap 40 mm dia
100 mm S.C.I. trap with vent heel
100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet
100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet
S.W. gully trap P type 100x100 mm
S.W. gully trap P type 150x100 mm
S.W. gully trap P type 180x150 mm
Vitreous china lipped front urinal
Vitreous china squatting plate urinal
H.P. or L.P. ball valve with polythene floats: 15 mm
dia H.P. or L.P. ball valve with polythene floats: 20
mm dia H.P. or L.P. ball valve with polythene floats:
25 mm dia
Brass full way valve with C.I. wheel (screwed end) 25 mm dia
Brass full way valve with C.I. wheel (screwed end) 32 mm dia
Brass full way valve with C.I. wheel (screwed end) 40 mm dia
Brass full way valve with C.I. wheel (screwed end) 50 mm dia
Brass full way valve with C.I. wheel (screwed end) 65 mm dia
Brass full way valve with C.I. wheel (screwed end) 80 mm dia
Gunmetal non-return valve-horizontal (screwed end) 25 mm
dia Gunmetal non-return valve-horizontal (screwed end) 32
mm dia Gunmetal non-return valve-horizontal (screwed end)
40 mm dia Gunmetal non-return valve-horizontal (screwed
end) 50 mm dia Gunmetal non-return valve-horizontal
(screwed end) 65 mm dia Gunmetal non-return valvehorizontal (screwed end) 80 mm dia C.I. sluice valve (with
caps) class I: 100 mm dia
C.I. sluice valve (with caps) class I : 125 mm dia
C.I. sluice valve (with caps) class I: 150 mm dia
C.I. sluice valve (with caps) class I : 200 mm dia
C.I. sluice valve (with caps) class I : 250 mm dia
C.I. sluice valve (with caps) class I: 300 mm dia
Vitreous china flat back wash basin 630x450 mm
Vitreous china angle back wash basin 600x480 mm
Vitreous china angle back wash basin 400x400 mm
C.P. brass waste 32 mm
C.P. brass waste 40 mm
Vitreous china Indian type W.C. pan size 580 mm
Vitreous china orrisa type W.C. pan size 580 mm

Unit

Rate `

each
250.00 each
225.00
each

170.00

each
225.00
each
250.00
each
315.00
each
275.00
each
218.00
each
90.00 each 130.00
each
225.00
each
460.00
each
1280.00
each
210.00
each
305.00
each
330.00
each
350.00
each
410.00
each
480.00
each
620.00
each
1080.00
each
1620.00
each
330.00
each
450.00
each
560.00
each
820.00
each
1490.00
each
2120.00
each
2410.00
each
2600.00
each
3600.00
each
7500.00
each
10980.00
each
15500.00
each
725.00
each
725.00
each
425.00
each
80.00
each

5.00 each 450.00

BASIC RATES : 0.3 MATERIALS

each

780.00

23

Code
No.

1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965

1970
1980
1984
1986
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414

Description

Vitreous china pedestal type water closet

Bolts and nuts 16 mm dia 60 mm long
Bolts and nuts 16 mm dia 65 mm long
Bolts and nuts 20 mm dia 65 mm long
Bolts and nuts 20 mm dia 70 mm long
Bolts and nuts 20 mm dia 75 mm long
Bolts and nuts 20 mm dia 80 mm long
Bolts and nuts 24 mm dia 85 mm long
Bolts and nuts 24 mm dia 90 mm longa
Bolts and nuts 27 mm dia 100 mm long
White vitreous china dual purpose closet (Anglo Indian W.C.)
suitable for use as squatting pan or European type water closet as
per manufacturers specifications
Vitreous china foot rests 250x125x25 mm
Fly ash
Common burnt clay F.P.S. bricks tile class designation 10
Common burnt clay modular bricks class designation 12.5
Strips-Aluminium fluted 3.15 mm thick and 150 mm wide
Strips Aluminium fluted 3.15 mm thick and 200 mm wide
1 mm thick Stainless Steel Cover plate grade
304 Coupler 16 mm dia
Coupler 20 mm
dia Coupler 25
mm dia Coupler
28
mm
dia
Coupler 32 mm
dia
Complete Roof Joint of 100
mm Complete Roof Joint of
150 mm Complete Roof Joint
of 200 mm Epoxy adhesive
Floor Joint of 100
mm Floor Joint of
150 mm Floor Joint
of 200 mm
Float glass sheet of nominal thickness 4 mm (weight not less
than 10 kg/sqm)
Float glass sheet of nominal thickness 5.5 mm (weight not less
than 13.50 kg/sqm)
Float glass sheet of nominal thickness 8 mm (weight not less
than 20.00 kg/sqm)
Wall Joint of 100 mm
Wall Joint of 150 mm
Wall Joint of 200 mm
Ply wood 5 ply with commercial ply on both faces 6 mm thick

12
m
m
co
m
me
rci
al
ply
18 mm
thick
block
board
with
commerc
ial ply
veneerin
g on both
side

Unit

each
each
each
each
each
each
each
each
each
each

each pair
cum
1000 Nos
1000 Nos
metre metre
kg
each
each each
each each
metre metre
metre kg
metre metre
metre
sqm
sqm
sqm metre
metre
metre sqm
sqm
sqm

Rate `

7
0
0
.
0

24

0 12.00 12.00 15.00 15.00 16.00 18.00 28.00 32.00 38.00

345.00
520.00

1300.00 100.00 8.00 5200.00 5500.00 228.00 323.00 275.00

67.00 88.00 130.00 192.00 231.00 4500.00 4800.00 5000.00
150.00 4500.00 5000.00 5400.00

74
0.
00

3400.00
3700.00
4000.00
450.00
700.00
850.00

BASIC RATES : 0.3 MATERIALS

Code
No.

2447
2449
2451
2452
2453
2454
2455
2456
2459
2464
2465
2466
2467
2468
2469
2470
2471
2480
2481
2483
2484
2485
2486

2487

2488

2489
2500
2504
2505
2506

Description

Hollock ballies 125 mm diameter

Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x
42 mm with screws, bolts, nuts and washers complete
Brass cupboard lock 6 levers of approved quality, 40 mm
size Brass cupboard lock 6 levers of approved quality, 50
mm size Brass cupboard lock 6 levers of approved quality,
65 mm size Brass cupboard lock 6 levers of approved
quality, 75 mm size Brass hanging type door stopper 150
mm
Hydraulic door closer bottle type M.S. body with necessary
accessories and screws complete
Anodised Aluminium hanging type door stopper
Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x
42 mm with screws, bolts, nuts and washers complete
Anodised Aluminium Casement stay 250 mm
Hollock wood in scantling
Chromium plated Brass pull bolt lock (locking bolt) of size 85 mm
x 42 mm with screws, bolts, nuts and washers complete
Nickled Chromium Brass cupboard lock 40 mm size
Nickled Chromium Brass cupboard lock 50 mm size
Nickled Chromium Brass cupboard lock 65 mm size
Nickled Chromium Brass cupboard lock 75 mm size
Ply wood 5 ply with teak ply on both faces 9 mm thick
Ply wood 5 ply with teak ply on one face and commercial ply on
another face 9 mm thick
Ply wood 7 ply with teak ply on one face and commercial ply on
another face 9 mm thick
Pre-laminated with decorative lamination on both side
exterior Grade - I MDF Board 12 mm thick confirming to
IS:14587
Pre-laminated with decorative lamination on both side
exterior Grade - I MDF Board 18 mm thick confirming to
IS:14587
Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade - I MDF Board 25 mm
thick confirming to IS:14587
Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade - I MDF Board 12 mm
thick confirming to IS:14587
Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade - I MDF Board 18 mm
thick confirming to IS:14587
PVC edge bending tape 2.00 mm thick
Extra for selected planks of second class deodar wood
Kiln seasoning of timber
Hollock wood in planks
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw

comprising of 10 mm dia
polyamide PA 6 grade
sleave. Size 10 mm x 60
mm

Unit
Rate `

ach
each

metre
35.00
e
a
c
h
5
5
.
0
0

70.00 each
100.00 each

80.00 each
70.00

600.00 each

28.00

each

55.00 each

each
each

170.00 each
90.00 each

sqm

850.00

sqm

950.00

sqm

700.00

e
BASIC RATES : 0.3 MATERIALS

85.00

55.00 10 cudm
340.00

70.00 each
115.00 sqm

80.00
1050.00

sqm

750.00

sqm

1220.00

sqm

650.00

sqm
metre

875.00
30.00
10 cudm
110.00 cum
750.00 10 cudm
390.00

10 nos

260.00

25

Code
No.

2507

2508

2509

2510

2602
2603
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2634
2704

Description

Carben Steel galvanised dash fastner (min 5 micron) of 10 mm

dia double threaded 6.8 grade counter sunk head screw
comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10
mm x 80 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw
comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10
mm x 120 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw
comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10
mm x 140 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm
dia double threaded 6.8 grade counter sunk head screw
comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10
mm x 160 mm
Common burnt clay F.P.S. (non modular) bricks class designation
7.5 Common burnt clay F.P.S. (non modular) bricks class
designation 5.0 Structural sealant - 6 mm x 12 mm
Spacer tape 6.4 mm thick x 6 mm
Weather Sealant - Non Staining (600
ml) Weather Sealant - Normal (300 ml)
MS Brackets/Aluminium Alloy Brackets
Silicon Gasket in Kg (Above 50 g / m)
EPDM Gasket in Kg (Above 60 g / m)
Anchor Fastner - M10
SS Bolt with washer of sizes for structural glazing / ACP Cladding
SS Screws of sizes for structural glazing / ACP Cladding
Protective Tape
GI flashing - 1.2 mm Thick
6 mm thick High performance glass
6 mm thick clear heat strengthened glass
6 mm thick clear heat strengthened glass
ARMS GS HD -TOP HUNG -20"-TYPE PCOUPLE Connection Block
Curtain wall striker
Adjustable Fastening Pawl
Corner drive
Top wedge Block
Glass wool Denisity 48 Kg / m3 with Black Glass Tissue (BGT)
SS Screws - # 8 x 19
Weather Sealant - DC 789
Cement Board
Baker rod
4 mm thick ACP
Fire Stop
GI/Aluminium Sheet (0.8 mm thick)

Aluminiu
m Strip
40 mm
wide and
2 mm
thick

Unit

10nos

10 nos

10 Nos

10 Nos 1000
Nos 1000 Nos
metre metre
each each
kg
kg
kg
each
each each
each
kg
sqm sqm
each pair
each each
each each
each sqm
each
cartridge sqm
metre sqm
metre kg
kilogram

Rate `

460.00
300.00

365.00

26

575.00 4500.00 4200.00 35.00 20.00 460.00 145.00 100.00

605.00 160.00 110.00 35.00 5.00 25.00 66.00 2000.00 770.00
145.00 1570.80 39.35 105.00 38.25 294.95 135.00 230.00

10
.0
0
13
5.
00
25

0.00
5.00
1200.0
0
565.00
55.00
225.00

BASIC RATES : 0.3 MATERIALS

Code
No.

2708
2709
2710
2711
2712
2713
2714
2715
2750
2751
2901
2902
2903
2904
2908
2909
2910
2911
2914
2916
3002
3004
3050
3080
3084
3088
3092
3096
3213
3228
3229
3300
3311
3314
3317
3320
3321
3326
3327
3617
3620

Description

Truf Paver (500 x 500 x 40 mm)

Ceremic Tiles Pieces for Crazy Flooring
White marble makrana second quality plain veined stone
pieces for crazy flooring
FS800H Grade Flooring Panel ( Size 600 mm x600 mm x32
mm) Zinc Electroplated Pedestals - 300 mm
Zinc Electroplated Pedestals - 450 mm
Zinc Electroplated Tube Stinger
Machine Screw for Fixing
8 mm thick granite stone tiles (mirror polished of all shades)
8 mm thick marble tiles (polished) Raj Nagar
Stone Aggregate (Single size) : 100 mm nominal size
Stone Aggregate (Single size) : 80 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm
size Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm
size Stone chippings/ screenings 12.5/ 13.2 mm nominal
size Stone chippings/ screenings 10/ 11.2 mm nominal size
Solvent
Paving Asphalt VG 10 of approved quality
Polyvinyle chloride sheet 400 micron thick
Stone ware spouts 100 mm dia 60 cm long
Galvanised steel corrugated sheets
Gunmetal non-return valve - vertical (screwed end) 25 mm
dia Gunmetal non-return valve - vertical (screwed end) 32
mm dia Gunmetal non-return valve - vertical (screwed end)
40 mm dia Gunmetal non-return valve - vertical (screwed
end) 50 mm dia Gunmetal non-return valve - vertical
(screwed end) 65 mm dia Vitreous china Surgeon type wash
basin of size 660x460 mm
600x120 mm glass shelf with anodised aluminium angle
frame, C.P. brass brackets and guard rail of standard size
Vitreous china flat back wash basin 550x400 mm
Gunmetal non-return valve - vertical (screwed end) 80 mm
dia C.I.sluice valve (with caps) class II : 100 mm dia
C.I.sluice valve (with caps) class II : 125 mm
dia C.I.sluice valve (with caps) class II : 150
mm dia C.I.sluice valve (with caps) class II :
200 mm dia C.I.sluice valve (with caps) class II
: 250 mm dia C.I.sluice valve (with caps) class
II : 300 mm dia 15 mm Battery Based Sensor
Pillar Cock
C.P. Brass union 40mm dia
C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres

long:
100 mm
dia

Unit

sqm quintal
quintal each
each each each
each sqm sqm
cum cum cum
cum cum cum
cum cum
kilogram tonne
sqm each
quintal each
each each each
each each
each
each
each
each
each
each
each

each
each
each
each
each

0 250.00

Rate `

1
0
5
0
.
0

172.00 750.00 140.00 136.25 66.15 2.00 700.00 400.00

1000.00 1000.00 1150.00 1150.00 450.00 470.00 1250.00
1250.00 25.00 50600.00 40.00 40.00 5800.00 360.00
520.00 750.00 1010.00 1710.00 1100.00
250.00 550.00 2890.00 2910.00 3500.00 4300.00 9210.00

BASIC RATES : 0.3 MATERIALS

1
4
8
0
0.
0
0

18500.0
0
5822.00
195.00
1196.00

27

Code
No.

3621
3624
3625
3628
3629
3634
3635
3640
3641
3644
3645
3650
3651
3654
3655
3660
3664
3670
3674
3681
3682
3685
3686
3690
3695
3699
3707
3708
3712
3713
3716
3717
3728

Description

C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres
long: 75 mm dia
S.C.I. S&S bends with access door 100 mm dia
S.C.I. S&S bends with access door 75 mm dia
S.C.I. S&S bend 100 mm dia
S.C.I. S&S bend 75 mm dia
S.C.I. S&S heel rest sanitary bend 100 mm dia
S.C.I. S&S heel rest sanitary bend 75 mm dia
S.C.I. S&S single equal junctions 100x100x100 mm
S.C.I. S&S single equal junctions 75x75x75 mm
S.C.I. S&S single equal junctions with access door 100x100x
100 mm
S.C.I. S&S single equal junctions with access door 75x75x75 mm
S.C.I. S&S double equal junctions 100x100x100x100 mm
S.C.I. S&S double equal junctions 75x75x75x75 mm
S.C.I. S&S double equal junctions with access door 100x100x
100x100 mm
S.C.I. S&S double equal junctions with access door 75x75x75x
75 mm
S.C.I. S&S single unequal junctions 100x100x75 mm
S.C.I. S&S single unequal junctions with access door 100x100x
75 mm
S.C.I. S&S double unequal junctions 100x100x75x75 mm
S.C.I. S&S double unequal junctions with access door 100x100x
75x75 mm
S.C.I. S&S single equal invert branch of required degree
100x100x 100 mm dia
S.C.I. S&S single equal invert branch of required degree
75x75x 75 mm dia
S.C.I. S&S double equal invert branch of required
degree 100x100x 100x100 mm dia
S.C.I. S&S double equal invert branch of required
degree 75x75x 75x75 mm dia
S.C.I. S&S single unequal invert branch of required degree
100x 100x75 mm dia
S.C.I. S&S double unequal invert branch of required degree
100x 100x75x75 mm dia
S.C.I. S&S, 75 mm offset for 75 mm dia pipe
S.C.I. S&S, 150 mm offset for 75 mm dia pipe
S.C.I. S&S, 150 mm offset for 100 mm dia pipe
S.C.I. S&S, 114 mm offset for 75 mm dia pipe
S.C.I. S&S, 114 mm offset for 100 mm dia pipe
S.C.I. S&S, 152 mm offset for 75 mm dia pipe
S.C.I. S&S, 152 mm offset for 100 mm dia pipe
S.C.I. S&S door pieces 100 mm dia

Unit

Rate `

each
each
290.00
240.00
265.00
195.00
296.00
250.00
472.00
330.00

1035.00
each
each
each
each
each
each
each

each
each
each
each

495.00
373.00
620.00
462.00

each

615.00
each
480.00 each
570.00
each
640.00 each
800.00

each

850.00

each

425.00

each

323.00

each

530.00

each

425.00

each

545.00

each
each
each
each
each
each
each
each

725.00
225.00
285.00
390.00
300.00
383.00
358.00
465.00

each

28

400.00
BASIC RATES : 0.3 MATERIALS

Code
No.

3729
3733
3734
3738
3739
3746
3747
3749
3860
3861
4001
4002
4006
4007
4008
4009
4010
4011
4012
4013
4201
4202
4203
4204
4205
4206
4207
5001
6001
6007
6010
6019
6501
7001
7003
7004
7005
7006
7008
7009
7010

Description

S.C.I. S&S door pieces 75 mm dia

S.C.I. S&S, Slotted Cowl (Terminal Guard) 100
mm S.C.I. S&S, Slotted Cowl (Terminal Guard) 75
mm S.C.I. S&S, collars 100 mm
S.C.I. S&S, collars 75 mm
S.C.I. S&S, 75 mm offset for 75 mm dia pipe
S.C.I. S&S, 75 mm offset for 100 mm dia pipe
Vitreous china toilet paper holder of standard size
560 mm dia cover with frame (Heavy duty)
560 mm dia cover without frame (Heavy duty)
Stainless steel (Grade-304)hollow section round/square
tubes Stainless steel bolts/square bar and plates
Pressed steel door frames (mild steel sheet 1.60 mm) Profile
B Pressed steel door frames (mild steel sheet 1.60 mm)
Profile C Pressed steel door frames (mild steel sheet 1.60
mm) Profile E Mild steel tubes hot finished welded type
Mild steel tubes hot finished seamless type
Mild steel tubes electric resistant or induction butt welded
Circular C.I. Box for ceiling fan
Pulley 40 mm dia
Aluminium primer
Red oxide Zinc chromate primer
Copper acetate
Hydrochloric acid
Copper chloride
Copper nitrate
Ammonium chloride
Mobil oil
White marble slab Makrana second quality plain veined 18 mm
thick Pink marble slab plain 18 mm thick
Udaypur green marble slab plain 18 mm thick
Black Zebra marble slab plain 18 mm thick
Sand zone V (Jamuna)
Brass 100mm mortice latch and lock with 6 levers without pair of
handles
Pair of Anodised Aluminium lever handles for 100 mm
mortice latch and lock
Vitreous china flat back wash basin 450x300 mm
Vitreous china 10 litres low level cistern without fittings
Vitreous china 10 litres low level cistern with fittings
F.P.S. (non modular) clay fly ash bricks class designation 7.5
12.5 mm thick tapered edge gypsum plain borad
Galvanised Steel celling section (size 80x26x0.50 mm)

Unit

Rate `

each
each
each
each
each
each
each
each
each
each
kg
kg
metre
metre
metre
kilogram
kilogram
kilogram
each
each
litre
litre
kilogram
kilogram
kilogram
kilogram
kilogram
litre
sqm
sqm
sqm
sqm
cum

295.00
350.00
300.00
250.00
170.00
218.00
363.00
150.00
9000.00
5000.00
350.00
130.00
230.00
250.00
270.00
55.00
65.00
72.00
62.00
32.00
130.00
70.00
300.00
35.00
300.00
220.00
20.00
253.00
2000.00
800.00
800.00
500.00
600.00

each
each
each
each
each
1000 Nos
sqm
metre

280.00
340.00
425.00
925.00
1600.00
4600.00
160.00
72.00

BASIC RATES : 0.3 MATERIALS

29

Code
No.

7011
7012
7013
7014
7015
7016
7017
7018
7019
7020
7021
7022
7023
7024
7027
7028
7029
7030
7031
7032
7033
7034
7035
7036
7040
7042
7043
7044
7045
7046
7047
7048
7049
7050
7051
7052
7053
7055
7056
7059

Description

Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm)

Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm)
Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50
mm)
Galvanised Steel connecting clips (2.64 mm dia and 230 mm
long GI wire)
Galvanised Steel soffit cleat (Size 27x37x25x0.60
mm) Joint filler
Joint finisher
Joint tape roll
Dash fastener / Chemical fastner
All drive screws ( for gypsum
board) Primer ( for gypsum board)
Chlorpyriphos 20% E.C. / Lindane 20% E.C.
Chromium plated brackets ( curtain rods)
Acid Proof cement
M.S. Butt hinges 125x90x4 mm
12.5 mm thick Fully Perforated gypsum board
Galvanised wire mesh of average width of aperture 1.4 mm
and nominal dia of wire 0.63 mm
12.5 mm thick tapered edge gypsum fire resistant board
12.5 mm thick tapered edge gypsum moisture resistant board
Frosted glass sheet of nominal thickness 4 mm (weighing not
less than 10 kg/sqm)
Nickel plated M.S. pipe 25 mm dia
Nickel plated M.S. pipe 20 mm dia
Nickel plated M.S. Brackets for curtain rod 20 mm
Nickel plated M.S - Brackets for curtain rod 25 mm
Oxidised mild steel screws 35 mm 100
Mild steel conduit pipe (heavy type) ISI marked-20 mm
dia Mild steel conduit pipe (heavy type) ISI marked-25
mm dia Rolling shutters of 80x0.90 mm laths
Rolling shutters of 80x1.2 mm laths
Top cover of Rolling shutters 0.90 mm
thick Top cover of Rolling shutters 1.20
mm thick Rawl plug 50 mm (designation
10 nos)
Teak wood lipping of size 25x3 mm in pelmets
PU Primer
40 mm (average) PU spray having 40-45 kg/m3
density GI wire netting 3/4" x 24 G
400 G polythene sheet
Flat pressed 3 layer and graded particle board (medium
density) Grade 1 conforming to IS : 3087 - 18 mm thick
Aluminium tee channel (heavy duty) with rollers and stop end

Alumini
um
hanging
floor
door
stopper
with
twin
rubber
&
stopper

Unit

metre
metre
metre
each each
kilogram
kilogram roll
each 100 Nos
litre litre
each tonne
10 Nos sqm
sqm sqm
sqm
sqm metre
metre each
each Nos
metre metre
sqm sqm
metre metre
each metre
sqm sqm
sqm sqm
sqm metre
each

Rate `

4
3
.
0
0
7

30

2.00 23.00
4.50 3.50 27.00 24.00 135.00 15.00 60.00 73.00 160.00 7.00
8150.00 110.00 430.00
260.00 255.00 285.00
350.00 90.00 80.00 8.00 8.00 50.00 60.00 70.00 1100.00
1200.00 330.00 350.00 10.00 24.00 41.00 421.00 27.00 15.00

4
4
0
.
0
0

52.00
68.00

BASIC RATES : 0.3 MATERIALS

Code
No.

7060
7063
7064
7065
7068
7070
7071
7072
7073
7074
7075
7076
7077
7087
7090
7091
7095
7096
7097
7098
7101
7102
7103
7104
7105
7106
7107
711
2
711
3
711
4
711
5

7116
7117

Description

Hydraulic door closer

tubular type Aluminium
section body
Oxidised M.S.casement
stay (straight peg type)
300 mm not less than
0.33 kg
Oxidised M.S.casement
stay (straight peg type)
250 mm not less than
0.28 kg
Oxidised M.S.
casement stay
(straight peg type)
200 mm not less
than 0.24 kg
Extra for providing grilled
rolling shutters with 8 mm
dia M.S. rod
Chequered precast
cement concrete
tiles 22 mm thick
using marble chips
of size 6mm - Light
shade using white
cement
White marble Raj
Nagar plain 18 mm
thick upto 0.50 sqm
area Wall mounted
water closet
Adj
usta
ble
Vetr
ious
Chi
na
Cist
ern
with
fittin
gs
Whi
te
Vetr
ious
Chi

n
a
W
a
t
e
r
l
e
s
s
U
r
i
n
a
l
C
i
s
t
e
r
n
w
i
t
h

Waterless Urinal White Vetrious Urinal

Acid and alkali resistant tiles 300x300 mm size, 10 mm thick
S.C.I. Tee 150 mm
Expanded polystyrene type N- Normal
Expanded polystyrene type - SE
Stainless steel kitchen sink - with drain board bowl depth 250 mm
Stainless steel kitchen sink - with drain board 510 x 1040 mm
bowl depth 225 mm
Stainless steel kitchen sink - with drain board 510 x 1040 mm
bowl depth 200 mm
Stainless steel kitchen sink - with drain board 510x1040 mm bowl
depth 178 mm
Stainless steel kitchen sink - without drain board 610x510 mm
bowl depth 200 mm
Stainless steel kitchen sink - without drain board 610x460 mm
bowl depth 200 mm
Stainless steel kitchen sink - without drain board 470x420 mm
bowl depth 178 mm
Coloured Orissa pattern W.C. pan 580x440 mm
Coloured Pedestal type W.C. pan 580x440 mm (European
type) Coloured Vitreous china 10 lit. low level cistern
Coloured (other than black) solid P.V.C. seat in European W.C.
pan Circular shape 450 mm dia Mirror with Plastic moulded frame
Rectangular shape 453x357 mm Mirror with Plastic moulded frame
Oval shape 450x350 mm (outer dimensions) Mirror with
Plastic moulded frame
Rectangular shape 1500x450 mm Mirror with Plastic moulded
frame Hard board 6 mm thick
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia
with length not less than 700 mm i/c PVC waste fittings

Unit

Rate `

each

850.00

each

25.00

each

22.00

each
sqm

20.00
270.00

sqm
sqm
each
each
each
each
each

360.00
800.00
4650.00
2500.00
15000.00
3400.00
14000.00
10 Nos
575.00 each
600.00 sqm
140.00 sqm
170.00 each
5185.00

each

4950.00

each

4250.00

each

3000.00

each

3150.00

each

2845.00

f
i
t
t
i
n
g
s

each
2120.00
each
1320.00
each
1150.00
each
1720.00
each
550.00
each
450.00
each
300.00

f
o
r

each
each
sqm

350.00
700.00
175.00

each

30.00

BASIC RATES : 0.3 MATERIALS

31

Code
No.

7118
7119
7120
7123
7126
7127
7128
7129
7130
7131
7132
7133
7134
7135
7136
7137

7139

7143

7151

Description

Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia
with length not less than 700 mm i/c PVC waste fittings
Flexible (coil shaped) PVC waste pipe for sink and washbasin
32 mm dia with length not less than 700 mm i/c PVC waste
fittings
Flexible (coil shaped) PVC waste pipe for sink and wash basin 40
mm dia with length not less than 700 mm i/c PVC waste fittings
Coloured High density polyethylene / poly propylene 10 lit.
(full flush) capacity controlled low level flushing cistern with
fittings
White Vitreous china 10 litre (full flush) capacity controlled low
level flushing cistern with all fittings
Coloured Vitreous china 10 litre (full flush) capacity controlled
low level flushing cistern with all fittings
S.W. intercepting trap 100 mm
dia S.W. intercepting trap 150
mm dia
Rectangular shape 600x450 mm precast R.C.C. manhole
cover with frame - L.D. - 25
Square shape 450x450 mm precast R.C.C. manhole cover
with frame - L.D. - 25
Circular shape 450 mm dia precast R.C.C. manhole cover
with frame - L.D. - 25
Rectangular shape 500x500 mm precast R.C.C. manhole
cover with frame - M.D. - 10
Circular shape 500 mm dia precast R.C.C. manhole cover
with frame -M.D.-10
Circular shape 560 mm dia precast R.C.C. manhole cover
with frame - H.D. - 20
Circular shape 560 mm dia precast R.C.C. manhole cover
with frame - E.H.D. - 35
Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of 12 mm thick plain
type-I, medium density flat pressed three layer, graded particle
board (FPT-I) as per IS:3087 bonded with BWP type synthetic resin
adhesive, as per IS:848
Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of 12 mm thick both
sides prelaminated type-I, medium density flat pressed three layer,
graded particle board (FPT-I) as per IS:3087 bonded with BWP
type synthetic resin adhesive, as per IS:848
Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of 12 mm thick one
side prelaminated type-I, and other side balancing lamination,
medium density flat pressed three layer, graded particle board
(FPT-I) as per IS:3087 bonded with BWP type synthetic resin
adhesive,
as per IS:848
Factory made 30 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of sheet glass using

10 kg/ sqm glass panes

Unit
Rate `

each
35.00
each
28.00
each
30.00
each
685.00
each
975.00

32

each

1500.00 each

each

750.00

each

650.00

each

600.00

each

700.00

each

600.00

each

1100.00

each

1225.00

190.00 each

250.00
sqm

1850.00

qm

2050.00

sqm

2000.00

sqm

1700.00

BASIC RATES : 0.3 MATERIALS

Code
No.

Description

Unit

Rate `

Factory made 35 mm thick shutters with laminated veneer lumber

styles & rails as per TADS 15:1995 and panels of galvanised wire
gauge with average width of aperture 1.4 mm in both directions with
wire of dia 0.63 mm
sqm
1700.00
Factory made 30 mm thick shutters with laminated veneer lumber
7155
styles &rails as per TADS 15:1995 and panels of galvanised wire
gauge with average width of aperture 1.4 mm in both directions with
wire of dia 0.63 mm
sqm
1500.00
Laminated veneer lumber confirming to TADS 15:1995
7157
manufactured in factory in frames of doors, windows
10 cudm
730.00
Chemical ASTMC-type I
kg
110.00
7178
C.I. pile shoe
kilogram
50.00
7181
M.S. clamps for pile shoe
kilogram
45.00
7182
Bentonite
tonne
3100.0
7183
Oxidised M.S. safety chain (weighing not less than 450 gms) for
each
0 60.00
7184
door C.I. grating 150 mm dia, weighing not less than 440 gm
each
28.00
7187
uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe mm
metre
72.00
7188
dia
metre
135.00
7189
uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe mm
dia
7190
uPVC pipes (working pressure 4 kg / cm2 ) Rubber (Seal) Ring 75 mm dia each
18.00 7191
uPVC pipes (working pressure 4 kg / cm2 ) Rubber (Seal) Ring 110 mm dia each
20.00
7192
uPVC coupler for UPVC drainage pipes 75 mm
7241
Melamine
polish
7193
uPVC coupler for UPVC drainage pipes 110
7154

mm 7194
7195
7196
7197
mm 7198
7199
mm 7208
7209
bend 7212
7213
7214
7215
7231
7232
7233
7236
7237
7238
7239
7240

uPVC pushfit coupler (single) 75 mm thick

uPVC pushfit coupler (single) 110 mm thick
uPVC single equal Tee (without door) 75x75x75 mm
uPVC single equal Tee (without door) 110x110x110
uPVC single equal Tee (with door) 75x75x75 mm
uPVC single equal Tee (with door) 110x110x110
UPVC bend 87.5 75 mm bend
UPVC bend 87.5 110 mm
UPVC plain shoe 75 mm bend
UPVC plain shoe 110 mm bend
UPVC pipe clip 75 mm bend
UPVC pipe clip 110 mm bend
Resin Bonded Glass wool 16 kg/ m3: 50 mm thick
Resin Bonded Glass wool 24 kg/ m3: 50 mm thick
Fibre glass tissue reinforcement Type II Grade I
Precast chequered cement tiles 22 mm thick Dark shade using
ordinary cement
Precast chequered cement tiles 22 mm thick medium shade using
50% white cement 50% ordinary cement
High Albedo paint
Epoxy paint
Fire retardant paint

each

36.00 each 55.00 each

52.00 each
85.00
each
95.00 each
130.00 each
118.00 each
180.00 each 58.00 each 95.00 each
105.00 each
210.00
each
16.00 each 30.00 sqm
145.00 sqm
204.00
sqm
100.00

BASIC RATES : 0.3 MATERIALS

sqm

235.00

sqm
kg
litre
litre
litre

540.00
250.00
250.00
300.00
300.00

33

Code
No.

7244
7245
7246

7247

7248

7249

7250

7251

7252

7253

7254
7255
7256
7257
7258
7259
7260
7261
7266
7267
7268
7269

Description

Table rubbed polished stone 18 mm thick (75x50cm) Agaria

Marble stone - 18 mm thick
Table rubbed polished stone 18mm thick (75x50cm) Granite
stone-18 mm thick
Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test cap
after test etc. complete as per specification and up to 50 tonne
capacity pile
Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test cap
after test etc. complete as per specification & above 50 tonne and
up to 100 tonne
Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test cap
after test etc. complete as per specification & group of two or more
up to 50 tonne
Cyclic vertical load testing of piles in accordance with IS : 2911
(Part-IV) including preparation of pile head etc. for Single pile up to
50 tonne capacity
Cyclic vertical load testing of piles in accordance with IS : 2911
(Part-IV) including preparation of pile head etc. for Single pile above
50 tonne capacity pile and up to 100 tonne capacity pile
Cyclic vertical load testing of piles in accordance with IS : 2911
(Part-IV) including preparation of pile head etc. for Group of two
piles up
to 50 tonne capacity each
Lateral load testing of single pile in accordance with IS : 2911 part
-IV for determining safe allowable lateral load on pile up to 50 tonne
capacity
Lateral load testing of single pile in accordance with IS : 2911 part
-IV for determining safe allowable lateral load on pile above 50
tonne capacity
Hardening compound
Road marking paint (spirit based)
Superior quality road marking paint ( water based
) C.P. Brass bibcock 15 mm
C.P. Brass long nose bibcock 15 mm
C.P. Brass long body bibcock 15 mm
C.P. Brass stop cock (concealed) 15 mm
C.P. Brass angle valve 15 mm
Pressed clay tiles 20mm thick 250x250 mm size
Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin
bonded) (600x600x12 mm)
Semi perforated ceiling tiles (600x600x12 mm)
25 mm thick particle board

Unit

Rate `

sqm

2000.00

sqm

2000.00

per test

33200.00

per test

40300.00

per test

48500.00

per test

15000.00

per test

23000.00

per test

29500.00

per test

15000.00

per test
litre
litre
litre
each
each
each
each
each
1000
Nos

23600.0
0 40.00
120.00
170.00
375.00
657.00
501.00
513.00
417.00
12150.0
0

each
each
sqm

120.00
120.00
480.00

34

BASIC RATES : 0.3 MATERIALS

Code
No.

7270
7271
7272
7273
7280
7281
7295
7296
7297
7306
7307
7309
7312
7313
7314
7315
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7338
7339
7340
7342
7343
7344
7345
7346

Description

30 mm thick prelaminated flush door shutter

IInd class teak wood lipping 25 mm wide x 12 mm thick
25 mm thick melamine faced prelaminated three layer particle
board Resin Bonded Rockwool 48 kg/m3
Waste plastic additive
Chemical ASTMC-type
II
Granite of any colour, 18 mm thick (slab area upto 0.50 sqm)
Granite of any colour, 30 mm thick (slab area upto 0.50 sqm)
Granite of any colour, 18 mm thick (slab area above 0.50
sqm) Aluminium T or L sections
For flush door shutters Extra for providing teak veneering on
one side instead of commercial veneering
Paving Asphalt of grade VG-30 of approved quality
Expandable fastener with plastic sleeve and M.S. screws : 25 mm
long Expandable fastener with plastic sleeve and M.S. screws : 32
mm long Expandable fastener with plastic sleeve and M.S. screws :
40 mm long Expandable fastener with plastic sleeve and M.S. screws.
50 mm long Plasticizer / super plasticizer
Wall form panel 1250x500 mm
Tie bolt 12 mm dia 100 mm length
Tie bolt 12 mm dia 150 mm length
Tie bolt 20 mm dia 150 mm length
Tie bolt 20 mm dia 225 mm length
Spring coil 12 mm
Plastic cone 12 mm dia
Corner angle 45x45x5 mm 1.50 m
long 100 mm channel shoulder 2.5 m
long Double clip ( bridge clip)
Single clip
M.S. tube 40 mm dia
Wall form panel 1250x450 mm
Corner angle 45x45x5 mm 2.50 m
long Column clamp 450x1070 mm
Prop 2 m ( 2-3.5 m)
Binding wire
Gun metal cramp
Stainless steel cramp
Stainless steel pin.
Adjustable span ESO+SI (2.35-3.40)
Adjustable telescopic prop 3 m (2.02-3.75 m)
Beam clamp 300-380 mm (450-1070 mm)
each Prop 4 m
Double coupler

Unit

Rate `

sqm
metre
sqm
sqm
tonne
kg
sqm
sqm
sqm
kilogram

850.00
40.00
940.00
211.00
40000.0
0 170.00
1900.00
2300.00
2000.00
200.00

sqm
tonne
each
each
each
each
kilogram
each
each
each
each
each
each
each
each
each
each
each
metre
each
each
each
each
kilogram
kilogram
kilogram
kg
each
each
set
each
each

340.00
41000.0
0 10.00
11.00
14.00
15.00
38.00
1050.00
50.00
60.00
75.00
90.00
16.00
18.00
300.00
1160.00
97.00
77.00
280.00
1040.00
340.00
1220.00
830.00
53.00
330.00
340.00
190.00
1900.00
1200.00
422.00
1170.00
55.00

BASIC RATES : 0.3 MATERIALS

35

Code
No.

7347
7348
7349
7354
7358
7359
7361
7363
7364
7366
7367
7369
7375
7376
7377
7378
7379

7380
7381
7382
7385
7386
7387
7388
7389
7390
7391
7392
7393
7394
7395
7396
7397
7398
7399
7400

Description

Cadmium plated full threaded steel screws (30x4 mm

dia) Aluminium washer 2 mm thick 15 mm dia
12 mm M.S. U beading
Plastic encapsulated M.S. foot rest 30x20x15 cm
Flushing Cistern P.V.C. 10 litre capacity ( low level ) (White) (
with fittings, accessories and flush pipe)
P.V.C. automatic flushing cistern 5 litre capacity
P.V.C. automatic flushing cistern 10 litre capacity
15 mm C.P. brass tap with elbow operation lever
White glazed fire clay draining board 600x450x25 mm
Glass reinforced Gypsum ( GRG) board 12.5 mm thick
Galvanised M.S. sheet 0.5 mm thick pressed channel section of
size 50x32 mm
Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm
G.I. flush pipe and C.P. brass spreader including C.P.
connecting pipe Single lipped urinal
G.I. flush pipe and C.P. brass spreader including C.P.
connecting pipe Range of two lipped urinals
G.I. flush pipe and C.P. brass spreader including C.P.
connecting pipe Range of three lipped urinals
G.I. flush pipe and C.P. brass spreader including
C.P.connecting pipe Range of four lipped urinals
White vitreous china clay half stall urinal flat back 580x380x350
mm or angle back 450x375x350 mm with waste fittings as per
IS:2556
Precast R.C.C. grating with frame 500x450 mm horizontal
grating Precast R.C.C. grating with frame 450x100 mm vertical
grating Bitumen emulsion rapid setting (R.S.) confirming to IS :
8887
3 mm thick translucent white acrylic plastic sheet
12 mm thick particle board ceiling tile
Spigot for standard jointing
Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt
Anodising 15 microns on aluminium sections
Neoprene/EPDM rubber gasket
Anodising 25 microns on aluminium sections
Powder coating 50 microns on aluminium sections
Polyester powder coating 50 microns on aluminium sections
Double action hydraulic floor spring with stainless steel cover
plate
6 mm dia G.I. adjustable hangers including clips (up to 1.2 m
length) Double action hydraulic floor spring with brass cover plate
Base Jack
Challies
Cup locks
15 mm PTMT bib cock

Unit

Rate `

100 Nos
100 nos
metre
each

28.00
10.00
15.00
115.00

each
each
each
each
each
sqm

640.00
490.00
530.00
700.00
550.00
250.00

metre

70.00
80.00

each

465.00

each

1050.00

each

1250.00

each

1900.00

each
each
each
tonne
sqm
sqm
kilogram
each
kilogram
metre
kilogram
kilogram
kilogram
each
each
each
each
each
each
each

1600.00
650.00
325.00
29800.0
0 570.00
260.00
45.00
50.00
40.00
25.00
50.00
64.00
70.00
1550.00
28.00
1700.00
180.00
800.00
80.00
120.00

36

BASIC RATES : 0.3 MATERIALS

Code
No.

7401
7402
7403
7405
7406
7407
7408
7409
7410
7411
7412
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7426
7427
7428
7429
7430
7431
7432
7439
7442
7443
7444
7445
7449
7451
7452
7453
7466
7468

Description

15 mm PTMT bib cock with flange (fancy)

15 mm PTMT bib-cock long body with
flange 15 mm dia PTMT stop cock(male
thread)
20 mm dia PTMT stop cock
PTMT pillar cock
PTMT push cock 15 mm dia
PTMT push cock 12 mm dia 20 mm BSP
PTMT grating 100 mm dia
PTMT Pillar cock (fancy) 15 mm foam flow
125 mm grating with waste hole
Rectangular type with openable circular lid 150 mmsize18
mm high with 100 mm dia (110 gm)
Double acting air valve 50 mm
Double acting air valve 80 mm
Double acting air valve 100
mm
Water meter (including testing charges) 80 mm
Water meter (including testing charges) 100 mm
Water meter (including testing charges) 150 mm
Water meter (including testing charges) 200 mm
Dirt box strainer 80 mm
Dirt box strainer 100
mm Dirt box strainer
150 mm Dirt box
strainer 200 mm Cats
eye
Water stops Serrated with central bulb (225 mm wide, 8-11 mm
thick) Water stops Dumb bell with central bulb
Kickers
Wedge expansion hold fastener 1/4" or 6 mm
Wedge expansion hold fastener 3/8" or 10
Wedge expansion hold fastener 1/2" or 12 mm
8mm thick (mirror polished tiles machine cut edge) Raj Nagar
white Wheel 75 mm dia. 40 mm wide
Aluminium single cleat of size 30x32x3 mm
Aluminium grip strip of size 50x12x2 mm
25 mm thick prelaminated flush door shutter both side
decorative Aluminium U beading
Glass sheet (Pin headed) 4 mm thick
Raj nagar plain white marble (table rubbed and polished) 18
mm thick (slab area upto 0.50 sqm)
Raj nagar plain white marble (table rubbed and polished) 18
mm thick (slab area more than 0.50 sqm)
Second class deodar teak wood lipping 30 mm wide x 12 mm thick

Ven
eer
ed
part
icle
boa
rd
with
com
mer
cial
ven
eeri
ng
on
bot
h
side
s 12
mm
thic
k

Unit

each each
each each
each each
each each
each each
each each
each each
each each
each each
each each
each each
each metre
metre metre
each each
each sqm
each each
each sqm
kilogram sqm
sqm
sqm metre
sqm

Rate `

1
3
3
.
0

0 160.00 120.00 150.00 180.00 117.00 90.00 35.00 240.00

42.00
122.00 4000.00 5200.00 6800.00 2130.00 3300.00 5000.00
5400.00 2810.00 4580.00 5810.00 8250.00 180.00 415.00
390.00 375.00 14.00 15.00 28.00 500.00 65.00 15.00 12.00
850.00 220.00 320.00

BASIC RATES : 0.3 MATERIALS

650.00
7
5
0
.

00
30.00
520.00

37

Code
No.

7477

7478

7479

7480

7485
7486
7491
7492
7493
7494
7495
7496
7497
7498
7499
7500
7501
7503
7504
7505
7506
7507
7508
7509
7512
7513
7514
7515

Description

Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium
density) Grade I, Type II conforming to IS : 12823 (exterior grade)
12 mm thick
Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium
density) Grade I, Type II conforming to IS : 12823 (exterior grade)
18 mm thick
Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium
density) Grade I, Type II conforming to IS : 12823 (exterior grade)
25 mm thick
Pre/aminated particle board with both sides decorative lamination,
flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 12 mm thick
Oxidised M. S. hinges finished with nickel plating 50 mm (Over all
width)
Oxidised M. S. hinges finished with nickel plating 65 mm (Over all
width)
PTMT - Waste Coupling 31/32 mm
PTMT - Waste Coupling 38/40 mm
PTMT - Bottle Trap 31/32 mm
PTMT - Bottle Trap 38/40 mm
PTMT Ball Cock 15mm complete with Epoxy Coated
Aluminium Rod & H.D. Ball
PTMT Ball Cock 20mm complete with Epoxy Coated
Aluminium Rod & H.D. Ball
PTMT Ball Cock 25mm complete with Epoxy Coated
Aluminium Rod & H.D. Ball
PTMT Ball Cock 40mm complete with Epoxy Coated
Aluminium Rod & H.D. Ball
PTMT Ball Cock 50mm complete with Epoxy Coated
Aluminium Rod & H.D. Ball
PTMT Angle Stop cock with Flange 15 mm
PTMT Swiveling shower 15 mm
PTMT Liquid Soap Container of 400 ml
capacity PTMT Towel Ring 215x200x37 mm
PTMT- Towel Rail (450 mm)
PTMT - Towel Rail (600 mm)
PTMT Shelf 450x124x36 mm
PTMT - Urinal Spreader 15
mm
PTMT Soap Dish/Holder 138x102x75
mm PTMT handle 125x34x24 mm
PTMT handle 150x34x24 mm
PTMT butt hinges 75x60x10 mm
PTMT butt hinges 100x75x10 mm

Unit

Rate `

sqm

750.00

sqm

860.00

sqm

930.00

sqm

790.00

metre

42.00

metre
each
each
each
390.00
410.00

55.00
62.00
88.00
each

each

162.00

each

198.00

each

420.00

each

810.00

each
1150.00
150.00
110.00
185.00
152.00
242.00
292.00
314.00
150.00
130.00
35.00
40.00
50.00

each
each
each
each
each
each
each
each
each
each
each
each

each

38

65.00
BASIC RATES : 0.3 MATERIALS

Code
No.

7516
7517
7518
7552
7553
7555
7556
7651
7652
7653
7654
7655
7656
7657
7658
7659
7660
7661
7662
7663
7664
7665
7666
7668
7669
7670
7671
7672
7673
7674
7675
7676
7677
7678
7679
7680
7681
7682
7683
7684

Description

PTMT Tower bolt 152x42x18

mm
PTMT Tower
bolt
202x42x18 mm PTMT door
catcher 72x42
Coir veneered board 4 mm thick
Coir veneered board 6 mm thick
Coir veneered board 12 mm
thick Coir veneered board 18
mm thick
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia
Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia
Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia
Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia
Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia
Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 900 mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia
Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia
Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia
Rubber Gaskets Conforming to 1.S 5382 of S.B.R quality 200 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm
dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000
mm dia
Ductile Iron K - 12 specials suitable for push on jointing up to
600 mm dia
Ductile Iron K - 12 specials suitable for push on jointing over
600 mm dia
Ductile Iron specials suitable for mechanical jointing as per I.S.

9
5
2
3
u
p
t
o
6
0
0
m
m
d
i
a

Unit

each each
each sqm sqm
sqm sqm
metre metre
metre metre
metre metre
metre metre
metre metre
metre metre
metre metre
metre each
each each
each each
each each
each each
each each
each each
each each
quintal
quintal
quintal

Rate `

7
0.
0

0 90.00 35.00 300.00 400.00 700.00 1050.00 950.00 1200.00

1650.00 3250.00 2920.00 3550.00 4500.00 5200.00 6580.00
7930.00 11000.00 11900.00 12000.00 14500.00 16300.00
30.00 38.00 66.00 78.00 115.00 132.00 240.00 280.00 305.00
380.00 575.00 690.00 760.00 1000.00 1200.00

BASIC RATES : 0.3 MATERIALS

.00
13000
.00

13700.00

18000

39

Code
No.

7685
7686
7687
7688
7689
7690
7691
7692
7693
7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713
7714
7715
7716
7717

Description

Ductile Iron Specials suitable for mechanical jointing as per

I.S. 9523 over 600 mm dia
Ductile Iron Pipe Class K-9 flanges and welding 100 mm
dia Ductile Iron Pipe Class K-9 flanges and welding 150
mm dia Ductile Iron Pipe Class K-9 flanges and welding
200 mm dia Ductile Iron Pipe Class K-9 flanges and
welding 250 mm dia Ductile Iron Pipe Class K-9 flanges
and welding 300 mm dia Ductile Iron Pipe Class K-9
flanges and welding 350 mm dia Ductile Iron Pipe Class K9 flanges and welding 400 mm dia Ductile Iron Pipe Class
K-9 flanges and welding 450 mm dia Ductile Iron Pipe
Class K-9 flanges and welding 500 mm dia Ductile Iron
Pipe Class K-9 flanges and welding 600 mm dia Ductile
Iron Pipe Class K-9 flanges and welding 700 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 100 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 125 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 150 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 200 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 250 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 300 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 350 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 400 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 450 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 500 mm dia S&S
Centrifugally (Spun) C.I. Pipe class LA 600 mm dia
S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538
suitable for lead jointing up to 300 mm dia
S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538
suitable for lead jointing over 300 mm dia
S&S Centrifugally (Spun) C.I. Pipe specials suitable for
mechanical joint as per I.S. 13382 up to 300 mm dia
S&S Centrifugally (Spun) C.I. Pipe Specials suitable for
mechanical joint as per I.S. 13382 over 300 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 100 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 150 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 200 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 250 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 300 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 350 mm dia

Unit

quintal
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
quintal
quintal
quintal
quintal
metre
metre
metre
metre
metre
metre

Rate `

19650.0
0
2180.00
3500.00
4110.00
3425.00
6960.00
8800.00
10610.0
0
12900.0
0
15100.0
0
20630.0
0
25600.0
0 900.00
1120.00
1350.00
2300.00
3000.00
4050.00
4850.00
6400.00
7750.00
9000.00
12595.0
0
5450.00
8200.00
9000.00
9500.00
1375.00
2150.00
3400.00
4100.00

5240.00

40

6600.00

BASIC RATES : 0.3 MATERIALS

Code
No.

7718
7719
7720
7721
7722
7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734
7735
7736
7737
7738
7739
7741
7742
7743
7744
7745
7746
7747
7748
7749
7750
7751
7752
7753
7754
7755
7756
7757
7758

Description

Screwed double flanged centrifugally cast (spun) C.I. Pipe of

Class B conforming to I.S. 1536, - 400 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 450 mm dia
Screwed double flanged centrifugally cast (spun) C./. Pipe of
Class B conforming to I.S. 1536, - 500 mm dia
Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 600 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm
dia Extruded burnt flyash clay sewer bricks conforming to I.S
4885 Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894
Calcium Silicate Bricks machine moulded conforming to I.S. 4139
Modified Bitumen Refinery produced CRMB - 55
Modified Bitumen Refinery produced CRMB - 60
Bitumen emulsion medium setting (M.S.) confirming to IS :
M.S. pipe 150 mm dia casing pipe
M.S. pipe 200 mm dia casing pipe
PVC blind pipe 150 mm dia as per IS:
12818 PVC blind pipe 200 mm dia as per
IS: 12818 M.S. cap 150 mm dia
M.S. cap 200 mm dia
M.S bail plug 150 mm dia
M.S bail plug 200 mm dia
PVC slotted pipe 150 mm dia as per IS:
12818 PVC slotted pipe 200 mm dia as per
IS: 12818 Boulder 50 mm to 200 mm
Gravel 5 mm to 10 mm
Gravel 1.5 mm to 2 mm
Gravel 3 mm to 6 mm
M.S. pipe 100 mm dia casing pipe
uPVC blind pipe 100 mm dia as per IS: 12818

Unit

Rate `

metre

8550.00

metre

10900.00

metre

13560.00

metre
18800.0
metre
0 775.00
metre
1120.00
metre
1550.00
metre
2100.00
metre
2900.00
metre
3445.00
metre
4015.00
metre
4852.00
metre
5735.00
metre
7480.00
metre
9613.00
metre
12100.0
metre
0
metre
16070.0
1000 Nos
0
1000 Nos 17032.0
1000 Nos
0
tonne
6100.00
tonne
5800.00
tonne
5700.00
metre
52674.0
metre
0
metre
52747.0
metre
0
each
39283.0
each
0
each
1060.00
each
1300.00
metre
500.00
metre
750.00
cum
160.00
cum
200.00
cum
200.00
cum
220.00
metre
450.00
metre
700.00
350.00

7
BASIC RATES : 0.3 MATERIALS

00.00 650.00 680.00 770.00

360.00

41

Code
No.

7759
7760
7761
7762
7763
7764
7765
7766
7767
7768
7769
7770
7771
7772
7773
7774
7775
7800
7801
7802
7803
7804
7805
7806
7807
7808
7809
7850
7857
7858
7859
7861
7862
7863
7864
7865

Description

uPVC slotted pipe 100 mm dia as per IS: 12818

M.S. cap 100 mm dia
M.S. bail plug 100 mm dia
Precast R.C.C. perforated slab
Water supply tanker of 5000 litre capacity
M.S. socket 100 mm dia
M.S. socket 150 mm dia
M.S. socket 200 mm dia
Stone cleaning chemical approved by ASI
Water repallent chemical approved by
ASI
Stone surface strengthening chemical approved by
ASI Turpentine oil
Liquid Amonia 5%
Pea Gravel
Coloured inter locking C.C. paver
Block Stone size 10x10x7.50cm
Sodium pentachlorophenate
Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all
colours shades and designs except burgundy, bottle green,
black
Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and
designs of White, Ivory, grey, Fume Red brown etc.
Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs
except White, Ivory, Grey, Fume Red Brown etc.
Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more
in all shades designs White, Ivory, Grey, Fume Red Brown etc.
Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more
in all shades designs except White, Ivory, Grey, Fume Red Brown
etc.
Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C.
pan 724 mm X 578 mm
Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355
mm Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X
345 mm Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm
outlet Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm
outlet Agaria White marble slab plain 18 mm thick
P.T.M.T. Grating square slit 150 mm
P.T.M.T. Urinal cock 15 mm dia
P.T.M.T. Bib cock with nozzle 15 mm
P.T.M.T. Stop cock (concealed) 15
mm
15 mm nominal bore and 30 cm length PVC connection pipe
with P.T.M.T. Nuts
15 mm nominal bore and 45 cm length PVC connection pipe
with P.T.M.T. Nuts

P.T.M.T
.
extensio
n nipple
15 mm
P.T.M.T
.
extensio
n nipple
20 mm

Unit

metre each
each each
each each
each each
litre litre litre
litre litre
cum sqm
each
kilogram
sqm
sqm
sqm
sqm
sqm
each each
each each
each sqm
each each
each each
each
each each
each

Rate `

3
8
0.
0
0
1
3
0.
0
0
1

60.00 800.00 800.00 180.00 220.00 280.00 165.00 1587.00

1020.00 68.00 161.00 750.00 500.00 9.00 630.00
300.00
300.00
400.00
450.00
500.00

1
4
5.
0
0
1
5
8.
0
0

40.00
32.00
38.00

32.00

3800.00 1850.00 1850.00 435.00 468.00 1100.00 77.00 120.00

42

BASIC RATES : 0.3 MATERIALS

Code
No.

7866
7893
7895
7896
7900
7901
7902
7903
7904
8001
8002
8003
8004
8006
8007
8008
8010
8011
8012
8014
8100
8200
8201
8203
8204
8205
8206
8207
8210
8211
8212
8214
8215
8216
8217

Description

P.T.M.T. extension nipple 25

mm Tactile tile
Matt finished vitrified tile 100x100 x16 mm
Vitrified tile
Modular common burnt clay bricks of class designation 7.5
Machine moulded perforated common burnt clay FPS
(non modular) bricks of class designation 12.5
Machine moulded common burnt clay modular perforated
bricks of class designation 12.5
Machine moulded common burnt clay FPS (non modular) bricks
of class designation 12.5
Machine moulded common burnt clay tile bricks of class
designation 12.5
24 mm thick Factory made shutters with style, rails and panels of
PVC extruded sections in white, grey or wooden finish
30 mm thick Factory made shutters with style, rails and panels of
PVC extruded sections in white, grey or wooden finish
Factory made PVC rigid foam panelled shutter i/c carriage
Factory made PVC rigid foam panelled shutter as per IS : 4020
i/ c carriage
Factory made PVC rigid foam sheet 1 mm thick
Factory made PVC rigid foam sheet 5 mm thick
Factory made prelaminated PVC rigid foam sheet 5 mm thick
48mmX40mmX1.5mm thick Factory made door frame of
PVC extruded sections in white, grey or wooden finish
Factory made door frame PVC extruded sheet i/c
carriage Adhesive solvent cement
Factory made door frame of size 50x47 mm with wall thickness 5
mm made of single piece extruded profile
Powder coated M.S. butt hinges 100 mm X58 mmX1.9
mm A.P.P. modified polymeric felt (two layers) 1.5 mm
thick A.P.P. modified polymeric felt (two layers) 2 mm
thick
A.P.P. modified 2 mm thick membrane reinforced with glass fibre
matt A.P.P. modified 3 mm thick membrane reinforced with glass
fibre matt A.P.P. modified 3 mm thick membrane reinforced with
polyester matt Bitumen primer for bitumen membrane
Geotextile 120 grams per sqm
membrane Stainless steel screws 50 mm
Stainless steel screws 40 mm
Stainless steel screws 30 mm
Stainless steel screws 20 mm
Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked
Stainless steel butt hinges 100x58x1.9 mm IS: 12817 marked
Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked

Unit

each
sqm
sqm
sqm
1000
Nos
1000
Nos
1000
Nos
1000
Nos
1000
Nos
sqm
sqm
sqm
sqm
sqm
sqm
sqm
metre
metre
kg
metre
10 Nos
sqm
sqm
sqm
sqm
sqm
litre
sqm
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos

10 Nos
10 Nos

510.00 4850.00

Rate `

5
7.
0
0
9
0
0.
0
0
9
3
0.
0
0

4600.00
5350.00
5000.00
5250.00
2200.00
2300.00 2200.00
2600.00 200.00 632.00 752.00
160.00 370.00 165.00

BASIC RATES : 0.3 MATERIALS

5
0
0.
0
0
9
0.
0
0
8
0.
0
0
9

8.00
100.00
200.00
214.00
90.00
45.00
260.00
208.00
192.00
151.00
670.00
510.00
275.00

43

Code
No.

8218
8219
8220
8221
8222
8223
8224
8225
8300
8301
8302
8303
8304
8305
8501
8502
8504
8505
8506
8507
8508
8509
8510
8589
8590
8591
8592
8593
8594
8595
8597
8598
8599

Description

Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked

Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :
12817 marked
Stainless steel butt hinges (heavyweight) 100x60x2.5 mm IS :
12817 marked
Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :
12817 marked
M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341
marked. M.S. heavy weight butt hinges 100x75x3.5 mm IS:
1341 marked M.S. heavy weight butt hinges 75x60x3.1 mm IS:
1341 marked M.S. heavy weight butt hinges 50x40x2.5 mm IS :
1341 marked 1216 mm PE-AL-PE Composite pressure pipe
1620 mm PE-AL-PE Composite pressure
pipe 2025 mm PE-AL-PE Composite
pressure
pipe
2532
mm
PE-AL-PE
Composite pressure pipe 3240 mm PE-ALPE Composite pressure pipe 4050 mm PEAL-PE Composite pressure pipe Polymer
modified cementation coating
Fibre glass cloth
Multi surface paint
Acrylic exterior paint
Premium Acrylic exterior paint
Textured exterior paint
Primer for cement paint
Special Primer (C.W.)
Metal Primer (U.G.)
Calcium Silicate tegular edged celling tiles 595x595 mm and 15
mm thick
Galvanised Steel main Tee ceiling section Size 24x38x0.33
mm (3 metre long)
Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40
mm (3.00 metre long)
Galvanised Steel intermediate cross T section Size 24 x 25 x
0.33 mm (1.2 metre long)
Galvanised Steel intermediate cross T section Size 24 x 25 x
0.33 mm ( 0.6 metre long)
Galvanised Steel soffit cleat size 25x35x1.60 mm
Wooden screws with plastic rawl plugs 35x8 mm
GI Metal Tile Clip in Plain Beveled edge global white colour tiles
of size 600x600 mm and 0.5 mm thick
GI Metal Tile Clip in Perforated Beveled edge global white
colour tiles of size 600x600 mm and 0.5 mm thick
GI Metal Tile Lay-in Plain Tegular edge global white color tiles
of Size 595x595 mm and 0.5 mm thick

Unit

Rate `

10 Nos

190.00

10 Nos

910.00

10 Nos

690.00

10 Nos
10 Nos
10 Nos
10 nos
10 Nos
metre
metre
metre
metre
metre
metre
kilogram
sqm
litre
litre
litre
litre
litre
litre
litre

460.00
350.00
200.00
100.00
90.00
95.00
125.00
160.00
205.00
340.00
375.00
150.00
44.00
290.00
180.00
240.00
240.00
78.00
150.00
170.00

sqm

860.00

each

195.00

each

125.00

each

80.00

each
each
each

40.00
4.00
1.00

sqm

895.00

sqm

1000.00

sqm

810.00

44

BASIC RATES : 0.3 MATERIALS

Code
No.

8600
8601
8602
8604
8605
8606
8607
8608
8609
8610
8611
8612
8613
8614
8615
8616
8617
8618
8620
8621
8622
8623
8625
8626
8627
8628
8629
8630
8631
8632
8633
8634

Description

GI Metal Tile Lay-in Perforated Tegular edge global white

color tiles of Size 595x595 mm and 0.5 mm thick
PVC Laminated Gypsum Tiles (Square edge) of Size
595x595 mm and 12.5 mm thick
Gypsum Tiles Fully Perforated Square edge of Size 595x595
mm and 12.5 mm thick
Spring T-section 24x34x0.45 mm (3.00 meter long)
C Wall angle section 20x30x20x0.50 mm (3.00 meter long)
Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)
Spring T-connector
C Carrier Connector
C Suspension Clip
Wire Coupling Clip
Main T ceiling sections 24x38x0.3 mm (3 metre long)
Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long)
Intermediate cross T-Section 24x25x0.3 mm (1.2 m
long) Intermediate cross T-Section 24x25x0.3 mm (0.6
m long) Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash fastener 6 mm dia 50 mm long
Vitrified floor tile 50x50 cm
Vitrified floor tile 60x60 cm
Vitrified floor tile 80x80 cm
Vitrified floor tile 100x100
cm
Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4
-16 mm Outer dia
Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4
-20 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-25 mm outer dia
Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4
-32 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-40 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-50 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-63 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-75 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-90 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11
-110 mm Outer dia

Unit

Rate `

sqm

910.00

sqm

470.00

sqm

485.00
metre
180.00 metre
155.00 metre
165.00 each
5.00 each
11.00 each
11.00 each
9.00 each
190.00 each
120.00 each
75.00 each
35.00 each
8.00 each
6.00 each
4.00 each
11.00 sqm
770.00 sqm
850.00 sqm
950.00 sqm
1600.00

metre

37.00

metre

57.00

metre

88.00

metre

142.00

metre

213.00

metre

333.00

metre

513.00

metre

700.00

metre

1066.00

metre

1200.00

BASIC RATES : 0.3 MATERIALS

45

Code
No.

8635
8636
8637
8638
8639
8640
8641
8642
8643
8644
8645
8646
8647
8648
8649
8650
8651
8652
8653
8654
8655
8656
8657
8659
8660
8661
8662
8663
8664
8665
8666
8667
8668
8669
8670
8671
8672

Description

Poly propylene - Random - Co - polymer (PPR) pipes SDR 11-160 mm Outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 mm inner
dia Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner
dia Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner
dia Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner
dia Silicon sealant
Stainless steel screws 30 mm x4 mm
Hermetically sealed double glazed unit made with 6 mm thick
clear float glass both side having 12 mm air gap
Stainless steel (SS 304 grade) adjustable friction window
stay 205 x 19 mm
Stainless steel (SS 304 grade) adjustable friction window
stay 255 x 19 mm
Stainless steel (SS 304 grade) adjustable friction window
stay 355 x 19 mm
Stainless steel (SS 304 grade) adjustable friction window
stay 510 x 19 mm
Stainless steel (SS 304 grade) adjustable friction window
stay 710 x 19 mm
Masking tape
Autoclaved aerated cement (AAC) blocks
Gypsum panel 666 X 500 X 100 mm size
Bonding plaster for Gypsum panel
Water proof ply 12 mm thick
Aluminium casement window fastener (Anodised AC 15 )
Aluminium casement window fastener (powder coated )
Aluminium casement window fastener (polyester powder
coated) Aluminium round shape handle (anodised AC 15)
Aluminium round shape handle (powder coated)
Aluminium round shape handle (polyester powder
coated) Stainless steel screws 25 mm x4 mm
UV stabilised 2 mm thick plain FRP sheet
UV stabilised 2 mm thick corrugated FRP sheet
Mangalore ridge tiles 20 mm thick
Mangalore tiles 20 mm thick
Precoated galvanised iron profile sheet 0.50 mm TCT
Precoated galvanised steel plain ridges

Unit

Rate `

metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
cartridge
100 Nos

2500.0
0 55.00
68.00
95.00
130.00
185.00
300.00
910.00
1300.0
0
1800.0
0
2150.0
0
340.00
32.00

sqm
each
each
each
each
each
metre
cum
sqm
kg
sqm
each
each
each
each
each
each
100 Nos
sqm
sqm
each
each
sqm
metre

2350.00
185.00
225.00
290.00
515.00
925.00
2.60
3200.0
0
480.00
55.00
650.00
42.00
43.00
42.00
52.00
58.00
62.00
35.00
470.00
540.00
30.00
12.00

46

35.00

440.00
BASIC RATES : 0.3 MATERIALS

Code
No.

8673
8674
8675
8676
8677
8678
8682
8683
8684
8685
8686
8687
8688
8689
8690
8691
8692
8693
8694
8695
8696
8697
8698
8699
8700
8701
8702
8703
8704
8705
8706
8707
8708

Description

Unit

Rate `

Precoated galvanised steel flashings/aprons

Precoated galvanised steel gutter

metre
metre

440.00
455.00

Precoated galvanised steel north light

curves Precoated galvanised steel barge

metre
metre

455.00
450.00

board Precoated galvanised steel crimp

curve

sqm
metre

475.00
48.00

1 mm thick 35 mm wide bright finished stainless steel piano

hinges Epoxy Grout

kg
sqm

510.00
460.00

Red sand stone gang saw cut 30 mm thick

White sand stone gang saw cut 30 mm thick

sqm
each

480.00
275.00

Delineator
Precast C.C. Kerb stone M - 25

cum
kg

4100.00
60.00

Thermoplastic paint

kg

60.00

Glass beads

sqm

350.00

Interlocking C.C. paver block ( 60 mm thick, M-30)

sqm

1525.00

High intensity retro - reflective sheet

Punched tape concertina coil 600 mm dia 10 m openable
length (Total length 90 m)
RBT reinforced barbed wire

bundle
750.00 metre
9.00 set

Turn buckle and strengthening bolt each

40.00 each
70.00

Precast pavement slab 450 x 450 x 50 mm (M - 30)

Chain link fabric fencing mesh of size 50x50 mm made of
G.I. wire of dia 4 mm
Chain link fabric fencing mesh of size 50x50 mm made of
G.I. wire of dia 4 mm, PVC coated to outer dia 5 mm
Chain link fabric fencing mesh of size 25x25 mm made of
G.I. wire of dia 3 mm
Stainless steel cramps(weight 260 grams) with nuts, bolts and
washer for dry stone cladding
8 mm thick tapered edge calcium silicate board
10 mm thick calcium silicate board
SS pipe 304 grades with press fit technology as per JIS
3448 standard 48.60 mm outer dia
Coupling/Socket fittings for 15.88 mm outer dia SS pipe
Telescopic drawer channels 300 mm long
Stainless steel roller for sliding arrangement in racks/
cupboards/ cabinets shutter
50 mmX42 mmX2 mm thick Factory made door frame of
PVC extruded sections in white, grey or wooden finish
25 mm thick factory made PVC flush door shutter i/c carriage
Factory made glass reinforced plastic door frame 90x45 mm i/c
carriage
30 mm thick factory made glass fiber reinforced plastic panel
door shutter i/c carriage

sqm

258.00

sqm

285.00

sqm

340.00

each
sqm

90.00

250.00
400.00

sqm

metre
each

680.00
57.00

set

150.00

each

9.00

metre

150.00

sqm

2200.00

metre

390.00

sqm

1900.00

BASIC RATES : 0.3 MATERIALS

47

Code
No.

8709

8710
8711
8712
8713
8714
8715
8716
8717
8719
8720
8721
8722
8723
8724
8725
8726
8727
8730
8731
8732
8733
8734
8735
8736
8737
8738

8739
8740
8741

Description

30 mm thick factory made solid PVC profile panelled door

single piece extruded profile decorative finish (wood grain
printed on both side)
Factory made solid PVC door frame 60 x 30 mm i/c carriage
28 mm factory made solid PVC panel door shutter i/c carriage
30 mm thick factory made solid PVC profile panelled door
single piece extruded profile non decorative finish
Fiber glass reinforced plastic chajja
Magnetic catcher triple strip vertical type
Magnetic catcher double strip horizontal type
100 mm mortice lock with 6 levers for aluminium
door 12.5 mm thick Glass fibre reinforced Gypsum
board
2nd class teak wood lipping / moulded beading or Taj beading
of size 18X5 mm
Ceiling sections 0.55 mm thick having a knurled web of 51.55
mm and two flanges of 26 mm each with lips of 10.55 mm
Perimeter channel having one flange of 20 mm and another
flange of 30 mm with thickness of 0.55 mm and web of length 27
mm
Nylon sleeves & wooden screws (40
mm) Counter sunk ribbed head screw 25
mm
12 mm thick marine plywood conforming to IS: 710
12 mm thick fire retardant plywood conforming to IS:
5509 1.5 mm thick decorative laminated sheet
1.0 mm thick decorative laminated sheet
30 mm thick factory made glass fiber reinforced plastic flush
door shutter i/c carriage
High polymer modified quickset tile adhesive per
Synthetic ployster triangular fibre of length 12 mm,
effective diameter 10-40 microns and specific gravity of
1.34 to 1.40
Synthetic ployster triangular fibre of length 6 mm, effective
diameter 10-40 microns and specific gravity of 1.34 to 1.40
P.V.C. Single piece extruded door frame of profile size 50 mm
x 47 mm with wall thickness of 5 mm
35 mm thick factory made solid panel PVC door shutter of single
piece extruded profile non decorative finished (Matt finished)
35 mm thick factory made solid panel PVC door shutter of single
piece extruded profile decorative finished (wood grain finished)
Stainless steel wire guage (Grade-304) aperture 1.4 mm and
0.50 mm dia wire
Factory made door frame fire rated ( 60 minutes) made with
16 SWG G.I. Sheet of section 143 mm x 57 mm duly filled
with vermuculite based concrete mix
Fire rated door shuttere made with 16 SWG G.I. sheet( 60
minutes) without panel

Fire seal Putty

Clear fire resistant glass
panes 6mm thick (60
minutes)

metre

Unit
Rate `

s
q
m
2
7
0
0
.
0
0

sqm
each

2150.00 sqm
15.00 each

metre

35.00

metre

44.00

metre
sqm

27.00 each
850.00 sqm

sqm
kg

300.00 sqm

2300.00

kg

400.00

3800.00 each
340.00 sqm

20.00
195.00

metre

360.00

sqm

2150.00

sqm

2600.00

sqm

840.00

metre

1050.00

2.00 100 Nos

80.00
880.00 sqm
500.00 sqm
380.00
2200.00 kg

20.00

365.00
sqm

48

sqm
5300.00 kg
750.00
21500.00

BASIC RATES : 0.3 MATERIALS

Code
No.

8742

8743
8744
8745
8746
8747
8748
8750
8751
8752
8753
8754
8755
8756
8757
8758
8759
8760
8761
8762
8763
8764
8765
8766
8767
8768
8769
8770

Description

G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/

m2) with ceramic tape of suitable thickness and fire resistant
primer coating
Matrix Mineral Board
Panic Bar / latch (Double point)
65 mm x 55 mm x 2 mm thick Factory made door frame of PVC
extruded section in white,grey or wooden finish
37 mm thick Factory made shutter with style,rails and panels of
PVC extruded section in white or grey finish i/c carriage
75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC
extruded section in white,grey or wooden finish
37 mm thick Factory made fusion welded shutter with style,rails
and panels of PVC extruded section in wooden finish
Zinc alloy (white powder coated) casement handle for uPVC
windows Zinc alloy (white powder coated) Touch Lock for uPVC
windows
Zinc alloy rollers for uPVC
windows Zinc alloy rollers for
uPVC door
Zinc alloy (white powder coated) casement lock for uPVC windows
Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for
uPVC windows
Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for
uPVC windows
Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for
uPVC windows
Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm for
uPVC windows
Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm for
uPVC windows
uPVC extruded profile casement window Frame (50 mm x 50 mm)
uPVC extruded profile casement window sash (Style and
Rail) (62 mm x 34 mm)
uPVC extruded profile casement window mullion
(intermediate section) (66 mm x 50 mm)
uPVC extruded profile casement window T profile (one
vertical length in between two shutters) (24 mm x 34.5 mm)
uPVC extruded profile casement window glazing bead (12 mm
x 18 mm)
uPVC extruded profile casement window Frame ( 67 mm x 62 mm)
uPVC extruded profile casement Window Sash/Mullion ( 67
mm x 75 mm)(Style,rail and intermediate section)
uPVC extruded profile casement window glazing bead (35 mm
x 18 mm)
uPVC extruded profile Two Track Sliding frame (67 mm x 52
mm) uPVC extruded profile Sliding window Sash (60 mm x 44
mm)
uPVC extruded profile Sliding Interlock for Window (one

vertical length in
each shutter) (45.5
mm x 28 mm)

0 each

Unit
Rate `

m
et
re
2
8
0.
0
0
m
et
re
6
5.
0

metre

340.00

sqm

2400.00

metre
sqm
each

5200.00
metre

160.00

metre

195.00

metre

54.00

380.00
2600.00 each
55.00 each

180.00 each
90.00 each

metre
54.00 metre
245.00

120.00
110.00

each

250.00

metre

275.00

each

300.00

90.00

each

380.00

each

440.00

metre
metre
258.00
240.00
metre

53.00

each
BASIC RATES : 0.3 MATERIALS

550.00 metre

175.00

metre

49

Code
No.

8771
8772
8773
8774
8775
8776
8778
8779
8780
8781
8782
8783
8784
8785
8786
8787
8788
8789
8790
8791
8792
8793
8794
8795
8796
8797
8798
8799
8800
8801
8802
8803
8804
8805
8806
8807
8808
8809
8810

Description

uPVC extruded profile Sliding Door Sash (80 mm x 44

mm) Aluminium Track on bottom rail for uPVC window
Wool Pine for uPVC window
Aluminium Grill
Steel Galvanised tubular reinforcement for uPVC door/ window
Stainless steel dash fastener of 8 mm dia and 75 mm long bolt
Toughened glass 12 mm thickness
SS pipe 304 grades with press fit technology as per JIS
3448 standard 15.88 mm outer dia
SS pipe 304 grades with press fit technology as per JIS
3448 standard 22.22 mm outer dia
SS pipe 304 grades with press fit technology as per JIS
3448 standard 28.58 mm outer dia
SS pipe 304 grades with press fit technology as per JIS
3448 standard 34.00 mm outer dia
SS pipe 304 grades with press fit technology as per JIS
3448 standard 42.70 mm outer dia
8 mm thick Calcium silicate perforated tiles of size 595 x595 mm
Interlocking C.C. paver block ( 80 mm thick, M-30)
Coupling/Socket fittings for 22.22 mm outer dia SS pipe
Coupling/Socket fittings for 28.58 mm outer dia SS pipe
Coupling/Socket fittings for 34.00 mm outer dia SS pipe
Coupling/Socket fittings for 42.70 mm outer dia SS pipe
Coupling/Socket fittings for 48.60 mm outer dia SS pipe
Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe
Reducer for 28.58 mm X 15.88 mm outer Dia SS
pipe Reducer for 28.58 mm X 22.22 mm outer Dia
SS pipe Reducer for 34.00 mm X 15.88 mm outer
Dia SS pipe Reducer for 34.00 mm X 22.22 mm
outer Dia SS pipe Reducer for 34.00 mm X 28.58
mm outer Dia SS pipe Reducer for 42.70 mm X
15.88 mm outer Dia SS pipe Reducer for 42.70 mm
X 22.22 mm outer Dia SS pipe Reducer for 42.70
mm X 28.58 mm outer Dia SS pipe Reducer for
42.70 mm X 34.00 mm outer Dia SS pipe Reducer
for 48.60 mm X 15.88 mm outer Dia SS pipe
Reducer for 48.60 mm X 22.22 mm outer Dia SS
pipe Reducer for 48.60 mm X 28.58 mm outer Dia
SS pipe Reducer for 48.60 mm X 34.00 mm outer
Dia SS pipe Reducer for48.60 mm X 42.70 mm outer
Dia SS pipe Slip Coupling / Socket 15.88 mm outer
dia SS pipe Slip Coupling / Socket 22.22 mm outer
dia SS pipe Slip Coupling / Socket 28.58 mm outer
dia SS pipe Slip Coupling / Socket 34.00 mm outer
dia SS pipe

Slip Coupling / Socket

42.70 mm outer dia SS
pipe

00 metre
60.00 each

Unit
Rate `

m
et
re
3
0
0.
0
0
m
et
re
2
8.

50

metre

144.00

metre

254.00

metre

330.00

metre

468.00

20.00 kg
250.00 metre
20.00 sqm
1900.00

metre
582.00 sqm 690.00 sqm
88.00 each
108.00 each
330.00 each
446.00 each
141.00 each
145.00 each
237.00 each
237.00 each

466.65
231.00
103.00
234.00
359.00

each
each
each
each
each

362.00
362.00
387.00
468.00
470.00
474.00
479.00
522.00
each
184.00
236.00
349.00
each

each
each
each
each
each
each
each
each
113.00
each
each
490.00

BASIC RATES : 0.3 MATERIALS

Code
No.

8811
8812
8813
8814
8815
8816
8817
8818
8819
8820
8821
8822
8823
8824
8825
8826
8827
8828
8829
8830
8831
8832
8833
8834
8835
8836
8837
8838
8839
8840
8841
8842
8843
8844
8845
8846
8847
8848
8849
8850
8851
8852
8853

Description

Slip Coupling / Socket 48.60 mm outer dia SS pipe

Elbow 90o for 15.88 mm outer dia SS pipe
Elbow 90o for 22.22 mm outer dia SS
pipe Elbow 90o for 28.58 mm outer dia
SS pipe Elbow 90o for 34.00 mm outer
dia SS pipe Elbow 90o for 42.70 mm
outer dia SS pipe Elbow 90o for 48.60
mm outer dia SS pipe
Reducing Elbow 90o for 22.22 mm X 15.88 mm outer dia SS
pipe Reducing Elbow 90o for 28.58 mm X 15.88 mm outer dia
SS pipe Reducing Elbow 90o for 28.58 mm X 22.22 mm outer
dia SS pipe Reducing Elbow 90o for 34.00 mm X 22.22 mm
outer dia SS pipe Reducing Elbow 90o for 34.00 mm X 28.58
mm outer dia SS pipe Reducing Elbow 90o for 42.70 mm X
34.00 mm outer dia SS pipe Equal Tee for 15.88 mm outer dia
SS pipe
Equal Tee for 22.22 mm outer dia SS
pipe Equal Tee for 28.58 mm outer dia
SS pipe Equal Tee for 34.00 mm outer
dia SS pipe Equal Tee for 42.70 mm
outer dia SS pipe Equal Tee for 48.60
mm outer dia SS pipe
Reducing Tee for 22.22 mm X 15.88 mm outer dia SS
Reducing Tee for 28.58 mm X 15.88 mm outer dia SS
pipe Reducing Tee for 28.58 mm X 22.22 mm outer dia
SS pipe Reducing Tee for 34.00 mm X 15.88 mm outer
dia SS pipe Reducing Tee for 34.00 mm X 22.22 mm
outer dia SS pipe Reducing Tee for 34.00 mm X 28.58
mm outer dia SS pipe Reducing Tee for 42.70 mm X
15.88 mm outer dia SS pipe Reducing Tee for 42.70 mm
X 22.22 mm outer dia SS pipe Reducing Tee for 42.70
mm X 28.58 mm outer dia SS pipe Reducing Tee for
42.70 mm X 34.00 mm outer dia SS pipe Reducing Tee
for 48.60 mm X 15.88 mm outer dia SS pipe Reducing
Tee for 48.60 mm X 22.22 mm outer dia SS Reducing
Tee for 48.60 mm X 28.58 mm outer dia SS pipe
Reducing Tee for 48.60mm X 34.00 mm outer dia SS
pipe Reducing Tee for 48.60mm X 42.70mm outer dia SS
pipe
Male thread Tee for 15.88 mm outer dia X 15 mm nominal dia
threaded Male thread Tee for 22.22 mm outer dia X 15 mm nominal
dia threaded Male thread Tee for 22.22 mm outer dia X 20 mm
nominal dia threaded Male thread Tee for 28.58 mm outer dia X 15
mm nominal dia threaded Male thread Tee for 28.58 mm outer dia X
20 mm nominal dia threaded Male thread Tee for 28.58 mm outer dia

X 20 mm nominal dia
threaded Male thread
Tee for 34.00 mm outer
dia X 15 mm nominal
dia
threaded
Male
thread Tee for 34.00 mm
outer dia X 20 mm
nominal dia threaded
Male thread Tee for
34.00 mm outer dia X 25
mm nominal dia
threaded

Unit
Rate `

e
a
c
h
6
0
9.
0
0

each

86.00 each 153.00 each

429.00 each 657.00 each
148.00 each 216.00 each
321.00 each 396.00 each
159.00 each 231.00 each
617.00 each 864.00 each
225.00 each 280.00 each
548.00 each 558.00 each
819.00 each 821.00 each
830.00 each 894.00 each
920.00 each 958.00 each

BASIC RATES : 0.3 MATERIALS

808.00
221.00
698.00
296.00
291.00
564.00
822.00
913.00
993.00

211.00 each
each
each
each
each
1028.00 each
each
each
each
each
each

each
each
each
each
each
each
each
each

286.00
344.00
368.00
414.00
432.00
483.00
602.00
651.00
777.00

51

Code
No.

8854
8855
8856
8857
8858
8859
8860
8861
8862
8863
8864
8865
8866
8867
8868
8869
8870
8871
8872
8873
8874
8875
8876
8877
8878
8879
8880
8881
8882
8883
8884
8885
8886
8887
8888
8889
8890
8891

Description

Unit

Rate `

Male thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded
Male thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded
Male thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded
Male thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded
Male thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded
Male thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded
Male thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded
Male thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded
Male thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded
Male thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded
Male thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded
Male thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded
Female thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded
Female thread Tee for 22.22 mm outer dia X 15 mm nominal dia threaded
Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded
Female thread Tee for 28.58 mm outer dia X 15 mm nominal dia threaded
Female thread Tee for 28.58 mm outer dia X 20 mm nominal dia threaded
Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded
Female thread Tee for 34.00 mm outer dia X 15 mm nominal dia threaded
Female thread Tee for 34.00 mm outer dia X 20 mm nominal dia threaded
Female thread Tee for 34.00 mm outer dia X 25 mm nominal dia threaded
Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded
Female thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded
Female thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded
Female thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded
Female thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded
Female thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded
Female thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded
Female thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded
Female thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded
Female thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded
Female thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded
Female thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded
Female threaded Connector/Adapter for 15.88 mm outer dia X 15
mm nominal threaded
Female threaded Connector/Adapter for 22.22 mm outer dia X 15
mm nominal threaded
Female threaded Connector/Adapter for 22.22 mm outer dia X 20
mm nominal threaded
Female threaded Connector/Adapter for 28.58 mm outer dia X 15
mm nominal threaded
Female threaded Connector/Adapter for 28.58 mm outer dia X 20
mm nominal threaded

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

981.00
919.00
941.00
1024.00
1137.0
0
1381.00
1000.00
1030.00
1074.00
1290.00
1431.00
1749.00
292.00
344.00
356.00
445.00
455.00
498.00
668.00
679.00
766.00
910.00
894.00
910.00
1022.00
1067.00
1162.0
0
1065.00
1076.00
1115.00
1184.0
0
1233.00
1366.00

each
each
each
each
each

190.00
230.00
237.00
277.00

286.00

52

BASIC RATES : 0.3 MATERIALS

Code
No.

8892
8893
8894
8895
8896
8897
8898
8899
8900
8901
8902
8903
8904
8905
8906
8907
8908
8909
8910
8911
8912
8913
8914
8915
8916
8917
8918

Description

Female threaded Connector/Adapter for 28.58 mm outer dia X

25 mm nominal threaded
Female threaded Connector/Adapter for 34.00 mm outer dia X
25 mm nominal threaded
Female threaded Connector/Adapter for 34.00 mm outer dia X
32 mm nominal threaded
Female threaded Connector/Adapter for 42.70 mm outer dia X
32 mm nominal thraded
Female threaded Connector/Adapter for 42.70 mm outer dia X
40 mm nominal threaded
Female threaded Connector/Adapter for 48.60 mm outer dia X
40 mm nominal threaded
Female threaded Connector/Adapter for 48.60 mm outer dia X
50 mm nominal threaded
Male threaded Connector/Adapter for 15.88 mm outer dia X
15 mm nominal threaded
Male threaded Connector/Adapter for 22.22 mm outer dia X
15 mm nominal threaded
Male threaded Connector/Adapter for 22.22 mm outer dia X
20 mm nominal threaded
Male threaded Connector/Adapter for 28.58 mm outer dia X
20 mm nominal threaded
Male threaded Connector/Adapter for 28.58 mm outer dia X
25 mm nominal threaded
Male threaded Connector/Adapter for 34.00 mm outer dia X
25 mm nominal threaded
Male threaded Connector/Adapter for 34.00 mm outer dia X
32 mm nominal threaded
Male threaded Connector/Adapter for 42.70 mm outer dia X
32 mm nominal threaded
Male threaded Connector/Adapter for 42.70 mm outer dia X
40 mm nominal threaded
Male threaded Connector/Adapter for 48.60 mm outer dia X
40 mm nominal threaded
Male threaded Connector/Adapter for 48.60 mm outer dia X
50 mm nominal threaded
Valve Connector for 15.88 mm outer dia X 15 mm nominal dia
threaded Valve Connector for 22.22 mm outer dia X 15 mm nominal
dia threaded Valve Connector for 22.22 mm outer dia X 20 mm
nominal dia threaded Valve Connector for 28.58 mm outer dia X 25
mm nominal dia threaded Valve Connector for 34.00 mm outer dia X
32 mm nominal dia threaded Valve Connector for 42.70 mm outer dia
X 40 mm nominal dia threaded Valve Connector for 48.60 mm outer
dia X 50 mm nominal dia threaded
Female Threaded Elbow 900 for 15.88 mm outer dia X 15
mm nominal dia threaded
Female Threaded Elbow 900 for 22.22 mm outer dia X 15
mm nominal dia threaded

Unit

Rate `

each

337.00

each

409.00

each

538.00

each

576.00

each

681.00

each

838.00

each

965.00

each

193.00

each

227.00

each

248.00

each

313.00

each

320.00

each

461.00

each

565.00

each

649.00

each

726.00

each

840.00

each
1138.00
234.00
276.00
295.00
424.00
629.00
875.00

each
each
each
each
each
each
each

1176.00
each

205.00

each
BASIC RATES : 0.3 MATERIALS

275.00

53

Code
No.

8919
8920
8921
8922
8923
8924
8925
8926
8927
8928
8929
8930
8931
8932
8933
8934
8935
8936
8937
8938
8939
8940
8941
8942
8943
8944
8945
8946
8947

Description

Female Threaded Elbow 90 for 22.22 mm outer dia X 20

mm nominal dia threaded
Female Threaded Elbow 900 for 28.58 mm outer dia X 25
mm nominal dia threaded
Female Threaded Elbow 900 for 34.00 mm outer dia X 32
mm nominal dia threaded
Female Threaded Elbow 900 for 42.70 mm outer dia X 32
mm nominal dia threaded
Female Threaded Elbow 900 for 42.70 mm outer dia X40
mm nominal dia threaded
Female Threaded Elbow 900 for 48.60 mm outer dia X 40
mm nominal dia threaded
Female Threaded Elbow 900 for 48.60 mm outer dia X 50
mm nominal dia threaded
Male Threaded Elbow 900 for 15.88 mm outer dia X 15
mm nominal dia threaded
Male Threaded Elbow 900 for 22.22 mm outer dia X 15
mm nominal dia threaded
Male Threaded Elbow 900 for 22.22 mm outer dia X 20 mm
nominal dia threaded
Male Threaded Elbow 900 for 28.58 mm outer dia X 25 mm
nominal dia threaded
MaleThreaded Elbow 900 for 34.00 mm outer dia X 25 mm
nominal dia threaded
Male Threaded Elbow 900 for 34.00 mm outer dia X 32 mm
nominal dia threaded
Male Threaded Elbow 900 for 42.70 mm outer dia X 32 mm
nominal dia threaded
Male Threaded Elbow 900 for 42.70 mm outer dia X40 mm
nominal dia threaded
Male Threaded Elbow 900 for 48.60 mm outer dia X 40 mm
nominal dia threaded
Male Threaded Elbow 900 for 48.60 mm outer dia X 50 mm
nominal dia threaded
Cap for 15.88 mm outer dia
pipe Cap for 22.22 mm outer
dia pipe Cap for 28.58 mm
outer dia pipe Cap for 34.00
mm outer dia pipe Cap for
42.70 mm outer dia pipe Cap
for 48.60 mm outer dia pipe
Pipe Bridge for 15.88 mm outer dia
pipe Pipe Bridge for 15.88 mm outer
dia pipe Pipe Bridge for 28.58 mm
outer dia pipe 4 Point facade glass
bracket
2 Point facade glass bracket
1 Point facade glass bracket

Unit

Rate `

each

284.00

each

421.00

each

733.00

each

920.00

each

995.00

each

1103.00

each

1286.00

each

216.00

each

273.00

each

288.00

each

377.00

each

605.00

each

736.00

each

934.00

each

1060.00

each

1190.00

each
1449.00 each
45.00 each
64.00 each
84.00 each
173.00 each
253.00 each
330.00 each
214.00 each
271.00 each
407.00 Nos
3318.00 Nos
1659.00
Nos
1404.00

54

BASIC RATES : 0.3 MATERIALS

Code
No.

8948
8949
8953
8954
8955
9999

Description

Flate head
400 fin plate at top
Micro Silica
Stop end tubes for diaphragmwall 600 mm dia.
Driving end tubes for diaphragm wall 600 mm
dia.
Sundries

Unit

Rate `

L.S.

Nos
651.00 pair
5931.00 kg
32.00 sqm
4.50 sqm
72.00
1.78

BASIC RATES : 0.3 MATERIALS

55

BASIC RATES
0.4 CARRIAGE CODES
(Carriage by Mechanical Transport including loading, Unloading and
stacking) Note: - Thesme rates are exclusive of contractors profit and overhead charges.
Code
No.

2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2211
2215
2216
2224
2225
2226
2228
2229
2241
2242
2260
2261
2262
2264
2265
2266
2267
2268
2271
2272
2273
2275
2281
2287
2290
2299

Description

Steam coal
Bricks 1000
Stone aggregate below 40 mm nominal
size Coarse sand
Timber
Steel
Stone aggregate 40 mm nominal size and
above Brick tiles 1000
Lime
Cement
Tar / Bitumen
Soling stone & masonry stone
Stone blocks white & red sand stone & kota stone slab
S.W. pipes 100 mm dia 100
S.W. pipes 150 mm dia 100
S.W. pipes 200 mm dia 100
S.W. pipes 250 mm dia 100
S.W. pipes 300 mm dia 100
Good earth
Dump manure
Brick aggregate
Fine sand (1 part badarpur sand: 2 parts jamuna
sand) Flyash
Rubbish
Moorum
Surkhi
Stone dust
Marble dust and/or marble chips
G.I. pipes below 100 mm dia
Stainless Steel pipes below 100 mm dia
A.C.sheet and accessories
R.C.C. pipes 100 mm
dia R.C.C. pipes 150
mm dia R.C.C. pipes
250 mm dia R.C.C.
pipes 300 mm dia
R.C.C. pipes 450 & 500 mm dia

Unit

tonne
Nos
cum
cum
cum
tonne
cum
Nos
cum
tonne
tonne
cum
tonne
metre
metre
metre
metre
metre
cum
cum
cum
cum
cum
cum
cum
cum
cum
cum
tonne
tonne
tonne
100 metre
100 metre
100 metre
100 metre
100metre

Rate `

121.70
283.96
106.49
106.49
121.70
94.65
115.75
170.38
106.49
94.65
106.49
125.28
94.65
141.98
283.96
473.27
811.33
1014.16
133.11
115.75
115.75
106.49
106.49
106.49
106.49
106.49
106.49
106.49
94.65
94.65
94.65
232.76
387.93
896.73
1108.37
2586.19

56

BASIC RATES : 0.4 CARRIAGE CODES

Code
No.

2302
2303
2308
2309
2311
2314
2317
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2355
2356
2357

Description

G.I.sheet and accessories

R.C.C. pipes 600,700,750 & 800 mm dia
Plaster of paris
Cast Iron fittings
Red bajri
Barbed wire
Sludge
Spun iron S & S pipes 100 mm dia
Spun iron S & S pipes 125 mm dia
Spun iron S & S pipes 150 mm dia
Spun iron S & S pipes 200 mm dia
Spun iron S & S pipes 250 mm dia
Spun iron S & S pipes 300 mm. dia
Spun iron S & S pipes 350 mm dia
Spun iron S & S pipes 400 mm dia
Spun iron S & S pipes 450 mm dia
Spun iron S & S pipes 500 mm dia
Spun iron S & S pipes 600mm dia 1
C.I. pipes 500 mm dia
R.C.C. pipes 900 mm dia
R.C.C. pipes 1000 mm dia
R. C. C. pipes 1100 mm dia
R.C.C. pipes 1200 mm dia
Jamuna sand
R.C.C. pipe above 1200 mm dia and upto 1800 mm
dia Pig lead
Solvent / Diesel.
Ductile Iron pipes (k7) 100 mm dia
Cast iron pipes 150 mm dia
Cast iron ptpes 200 mm dia
Cast iron pipes 250 mm dia 100
Cast iron pipes 300 mm dia 100
Cast iron pipes 350 mm dia 100
Cast iron pipes 400 mm dia 100
Cast iron pipes 450 mm dia 100
Cast iron pipes 500 mm dia 100
Cast iron pipes 600 mm dia 100
Cast iron pipes 700 mm dia 100
Cast iron pipes 800 mm dia 100
Cast iron pipes 900 mm dia 100
Cast iron pipes 1000 mm dia 100

Unit

tonne
100 metre
tonne
tonne
cum
tonne
cum
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
cum
100 metre
tonne
quintal
100 metre
100 metre
100 metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre

Rate `

94.65
3879.29
94.65
94.65
106.49
94.65
115.75
232.76
310.91
387.93
631.03
896.73
1108.37
1551.71
2115.97
2586.19
2586.19
3879.29
2586.19
5818.93
7758.57
7758.57
7758.57
106.49
7758.57
94.65
10.65
232.76
387.93
631.03
896.73
1108.37
1551.73
2115.97
2586.19
2586.19
3879.29
3879.29
3879.29
5818.93
7758.57

BASIC RATES : 0.4 CARRIAGE CODES

57

58

SUB-HEAD : 1.0

CARRIAGE OF MATERIALS

59

60

BASIC RATES (SH: 1.0 CARRIAGE OF MATERIALS)

Code No.

Description

Unit

Rate `

0005

Hire charges of Diesel Truck - 9

day

1700.00

011

tonne Beldar

day

329.00

Coolie

day

329.00

011

Mate

day

363.00

Bolts and nuts above 300 mm in

quintal

5800.00

0128

length Diesel

litre

55.49

1035

Mobil oil

litre

253.00

1235

Sundries

L.S.

1.78

5001
9999

BASIC RATES - 1 CARRIAGE OF MATERIALS

61

R
e
m
ar
ks

1.
0
C
A
R
RI
A
G
E
O
F
M
A
T
E
RI
A
L
S

62

B 20
ad
ey k pe k
dl.m
o mr
n
d 10 upk
B k to m k
ey m 20 pe m
1.
r
o
1
n 5 upk
k
B
d k to m
m
y
10
pe
B
M ) ey m
r
ec
5
o
ha R n
k
ni at d
m
ca e (
l
4
Tr
k
an
m
sp
or
3
t
k
in
m
cl
u
2
di
k
n
m
g
lo
1
ad
k
in
m
g,
u
nl U
oa nit
di
n
g
an
d
st
ac
ki
n
M
g
at
er
ial
s
S.
N
o.

Th be neaft pr C m s pun C
e ap t er es en en e cde ar
12 rat pli qude cri ta tio i f i r ri
es ca andu be ge ne c su agm
ar bl titicti d for d a t bh e at
e e es on pe vo in i o ea of eri
al
of r- id th n d
wilto
s
l
s e
12
16
10
6.
7.
6.
6.
6.
7.
11
34 93 90 .6
34 90 46 .9 .1
9
2 5

5.
64

10 7. 9. 8. 15
68 60 34 .3
5

7.
68

8. 9. 20 12
34 03 .4 .2
7 8

6.
82

9. 11 10 18
24 .5 .0 .4
4 4 7

9.
24

10 10 24 14
.0 .8 .6 .7
4 6 3 8

8.
21

12 15 13 24
2. 3. 3. 4.
46 07 11 92

12
2.
46

13 14 32 19
3. 4. 6. 5.
11 07 56 94

10
8.
85

11 14 12 22
2. 0. 1. 4.
17 22 93 35

11
2.
17

12 13 29 17
1. 1. 9. 9.
93 97 13 48

99
.7
1

10 12 11 20
1. 7. 0. 3.
61 01 44 22

10
1.
61

11 11 27 16
0. 9. 0. 2.
44 54 95 57

90
.3
2

90 11 98 18
.6 3. .5 1.
4 29 2 27

90
.6
4

98 10 24 14
.5 6. 1. 5.
2 63 70 02

80
.5
7

79 99 86 15
.5 .4 .4 9.
5 4 7 10

79
.5
5

86 93 21 12
.4 .5 2. 7.
7 9 13 28

70
.7
1

cu E M Ex 40 no S Br Br
to
m art an ca m
mi oli ic ic
nn
h ur va m
e
na ng ks k
Li cu e te
no l st 10 Til
m m or d S mi sizon 00 es
e,
sl ro an na e e N 10 G.
m
ud ck d, l St an cu os 00 C I.. St 10
oo
ge cu st si on d m
N e C. ee 0
on
e
ru
cu m
ze ab
os m I., l & m
C.
e
ag
m,
m
cu ov
en A. C. m he
ag m gr e
bu
t, C. pi di av
gr
eg cu
ild
st , pe a y
eg at m
in
on St s an m
at
e
g
e ai be d at
e
40
ru
bl nl lo ot eri
be m
bb
oc es w he al
lo
m
is
1.
r s
1.
1.
1.
1. 1. 1. ks s
h 1. 1. 1. w
1.
1. 1. 1. 1. 1.
1.
1. 1. 1. ,
10
1 2 3 4 5
6
7 8 9

SUB HEAD - 1 CARRIAGE OF MATERIALS

R
e
m
ar
ks

12

B 20
ad
ey k pe k
dl.m
o mr
n
d 10 upk
B k to m k
ey m 20 pe m
r
o
n 5 upk
k
d k to m
m
10
pe
B m
r
) ey
5
R o
k
at n
m
e( d
4
k
m

11 5. 7. 6. 0. 7.
64 25 34 63 25
6. 8. 7. 0. 8.
10 82 77 68 77 77

60
.4
2
73
.1
1

84
.5
9
10
2.
36

12
0.
84
14
6.
22

15
3.
79
18
6.
10

16
9.
71
20
4.
71

21
1.
47
25
5.
89

8. 10 9. 0. 10
21 .5 24 92 .5
5
5

12 24 41 70 87 12 17 22 24 30
.3 .6 .0 .3 .9 3. 5. 3. 6. 7.
1 3 4 6 5 13 91 88 27 84

10 13 12 12 13
8. 9. 2. .2 9.
85 95 46 5 95

99 12 11 11 12
.7 8. 2. .2 8.
1 20 17 2 20

3
k
m

90 11 10 10 11
.3 6. 1. .1 6.
2 12 61 6 12

2
k
m

16 32 54 93 11 16 23
3. 6. 4. 3. 66 32 32
28 56 26 02 .2 .7 .5
8 9 6
14 29 49 85 10 14 21
9. 9. 8. 4. 68 95 36
56 13 55 65 .3 .6 .6
2 4 3
13 27 45 77 96 13 19
5. 0. 1. 4. 7. 54 35
48 95 59 15 69 .7 .3
7 8
12 24 40 69 86 12 17
0. 1. 2. 0. 3. 08 26
85 70 83 56 20 .4 .4
8 0

29
68
.7
1
27
19
.3
5
24
63
.2
1
21
97
.2
3

32
65
.5
8
29
91
.2
8
27
09
.5
3
24
16
.9
6

40
81
.9
8
37
39
.1
1
33
86
.9
2
30
21
.2
0

70 90 79 7. 90
.7 .9 .5 95 .9
1 1 5
1

10 21 35 60 75 10 15
6. 2. 3. 6. 7. 60 15
07 13 56 10 62 .6 .2
7 4

19
28
.4
8

21
21
.3
3

26
51
.6
7

to cu to qtl to
nn m nn
on
e
e
e

10 10 10 10 10 10 10 10 10 10
0 0 0 0 0 0 0 0 0 0
m m m m m m m m m m

Ta
St
rB
ea S.
Ti itu S m W
St m m ol C .
ee be en ve oa pi
l r
nt l pe

10
0
m
m
di
a

15
0
m
m
di
a

20
0
m
m
di
a

25
0
m
m
di
a

30
0
m
m
di
a

35
0
m
m
di
a

40
0
m
m
di
a

45
0
m
m
di
a

1.
1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 16
11 12 13 14 15 16 .1

1.
1.
16
.2

1.
1.
16
.3

1.
1.
16
.5

1.
1.
16
.6

1.
1.
16
.7

1.
1.
16
.8

1.
1.
16
.9

U
nit
3

S.
N
o.

48
.3
4
58
.4
9

1
k
m

M
at
er
ial
s

8. 16 28
46 .9 .2
2 0
10 20 34
.2 .4 .1
4 7 2

80 10 90 9. 10
.5 3. .6 06 3.
7 58 4
58

SUB HEAD - 1 CARRIAGE OF MATERIALS

50
0
m
m
di
a
1.
1.
16
.1
0

60
0
m
m
di
a

pi
pi un
pe
pe rei
R.
s,
s, nf
R.
C.
C. st C. C. or
pi ee pi I. ce
pe l pe pi s
, cy s, pe ce pi
A. lin C. s m pe
C. de I. an en s
r,
d t

1.
1. 1.
16 1.
.1 17
1

63

R
e
m
ar
ks

12

B 20
ad
ey k pe k
dl.m
o mr
n
d 10 upk
B k to m k
ey m 20 pe m
r
o
n 5 upk
k
d k to m
m
10
pe
B m
r
) ey
5
R o
k
at n
m
e( d
4
k
m

11 13
.8
7
16
10 .7
8
9

3
k
m

2
k
m

1
k
m

U
nit
3

M
at
er
ial
s
S.
N
o.

64

18
.5
2
22
.4
1

23
.1
1
27
.9
7

37
.5
9
45
.4
9

53
.4
2
64
.6
5

66
.0
3
79
.9
0

92
.4
5
11
1.
87

12
6.
06
15
2.
54

15
4.
08
18
6.
44

23
1.
11
27
9.
66

34
6.
67
41
9.
49

46
2.
23
55
9.
33

20 26 33 54 77 96 13 18
.1 .9 .6 .7 .7 .1 4. 3.
9 6 4 3 7 2 57 51

22
4.
29

33 50
6. 4.
43 65

67
2.
87

26 35 44 72 10 12 17
7. 7. 6. 5. 31 74 84
67 55 12 69 .2 .6 .4
4 2 7
24 32 40 66 94 11 16
5. 7. 8. 4. 4. 67 34
19 51 65 73 62 .5 .5
6 8
22 29 37 60 85 10 14
2. 6. 0. 2. 5. 57 80
09 66 15 12 64 .5 .6
9 2
19 26 33 53 76 94 13
8. 4. 0. 7. 3. 3. 20
11 63 19 10 25 39 .7
4

24
33
.3
7
22
28
.9
8
20
19
.0
3
18
01
.0
1

29
74
.1
2
27
24
.3
0
24
67
.7
0
22
01
.2
4

44
61
.1
8
40
86
.4
5
37
01
.5
5
33
01
.8
6

66
91
.7
7
61
29
.6
8
55
52
.3
2
49
52
.7
8

89
22
.3
6
81
72
.9
1
74
03
.1
0
66
03
.7
1

17 23 28 47 66 82 11
3. 2. 9. 1. 9. 8. 59
88 26 80 41 89 00 .2
0

15
80
.7
3

19
32
.0
0

28
98
.0
0

43
46
.9
9

57
95
.9
9

10 10 10 10 10 10 10 10
0 0 0 0 0 0 0 0
m m m m m m m m

10
0
m

10 10
0 0
m m

10
0
m

10
0
m
m
di
a

12
5
m
m
di
a

15
0
m
m
di
a

20
0
m
m
di
a

25
0
m
m
di
a

30
0
m
m
di
a

35
0
m
m
di
a

40
0
m
m
di
a

45
0
m
m
&

50
0
m
m
di
a

1.
1.
17
.1

1.
1.
17
.2

1.
1.
17
.3

1.
1.
17
.4

1.
1.
17
.5

1.
1.
17
.6

1.
1.
17
.7

1.
1.
17
.8

1.
1.
17
.9

60
0,
70
0,
75
0
1.
1.
17
.1
0

&
80
0
m
m
di
a

90
0
m
m
di
a
1.
1.
17
.1
1

10
00
,
11
00
&
1.
1.
17
.1
2

`1
20
0
m
m
di
a

SUB HEAD - 1 CARRIAGE OF MATERIALS

1.0 CARRIAGE OF MATERIALS

1.2 By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM
S.No.

1
1.2.1

Material

Unit

Cost of carriage
including loading,
unloading &
stacking for first
50 metres
( )

Every additional
lead of 50 metre
or part there of
beyond 1st 50
metre upto 9
such additional
leads ( )

Remarks

Lime, moorum,
building rubbish

cum

82.91

18.05

1.2.2

Earth

cum

103.64

22.57

1.2.3

Manure or sludge

cum

90.12

19.62

1.2.4

Excavated rock
36.11

cum

165.83

1.2.5

Sand, stone aggregate below

40 mm nominal size

cum

103.64

22.57

Stone aggregate 40 mm
nominal size and above

cum

112.04

24.40

1.2.7

Soling stone

cum

121.93

26.55

1.2.8

Bricks

1000 Nos.

193.46

42.12

1.2.9

Brick Tiles

1000 Nos.

120.91

26.33

1.2.10

Steam Coal

tonne

96.73

21.06

1.2.11

Stone blocks ,G.I.,

C.I., Stainless Steel
pipes below 100 mm
dia and other heavy
materials

tonne

65.80
11.10

Cement

tonne

60.02

8.81

Steel

tonne

128.92

18.92

cum

82.88

12.16

tonne

75.67
11.10

100 m

151.47

22.23

100 m

248.99

36.54

100 m

348.43

51.13

100 m

580.14

85.13

1.2.6

1.2.12
1.2.13
1.2.14
1.2.15
1.2.16
1.2.16.1
1.2.16.2
1.2.16.3
1.2.16.5

Timber
Tar, bitumen etc.
S.W. pipe
100 mm dia
150 mm dia
200 mm dia
250 mm dia

The rates will be applicable to net quan-tities

after
deduction
of
prescri-bed percentage
for voids mentioned in
the
specifi-cation
under
subhead
Carriage of materials.

The length of S.W. pipes

will be measured exclusive of the internal depth
of sockets.

SUB HEAD - 1 CARRIAGE OF MATERIALS

65

1.2.16.6

300 mm dia

100

1.2.16.7

m 350 mm dia

1.2.16.8

100 m 400 mm dia

1.2.16.9

100 m 450 mm dia

1.2.16.10

100 m 500 mm dia

1.2.16.11

100 m

1.2.17

600 mm dia

1.2.17.1

R.C.C. pipes, Steel

cylinder, R.C. pipes,
C.I. pipes, C.I. pipes and
unreinforces cement
pipes

1.2.17.2

100 mm dia

100 m

1.2.17.3

125 mm dia

100 m

1.2.17.4

150 mm dia

100 m

1.2.17.5

200 mm dia

100 m

1.2.17.6

250 mm dia

100 m

1.2.17.7

300 mm dia

100 m

1.2.17.8

350 mm dia

100 m

1.2.17.9

400 mm dia

100 m

1.2.17.10

450 mm & 500 mm dia

100 m

1.2.18

600, 700, 750 &

800 mm dia

1.2.18.1

Asbestos cement pipes

1.2.18.2

50 mm dia

100 m

1.2.18.3

80 mm dia

100 m

1.2.18.4

100 mm dia

100 m

150 mm dia

100 m

4
828.77

121.61

1160.27
170.26

1450.34

212.82

1757.99

100 m
257.97

2148.65

315.29

100 m

2636.98

386.95

204.51

30.01

250.24

36.72

288.15

42.28

432.40

63.45

760.00

111.52

951.04

139.56

1359.70

199.52

1582.19

232.17

2109.59

309.56

2320.55

340.52

34.59

5.08

95.10

13.96

135.86

19.94

190.21

27.91

The length of the

flanged or plain ended
concrete
R.C.C.
pipes,
Steel
cylinders, R.C. pipes
and C.I. pipes shall be
measured overall. The
length
of
socketed
pipes
shall
be
measured exclusive
of internal depth of
sockets

The length of asbestos

cement pipes shall be
measured exclusive of
internal depth of
sockets.

66

SUB HEAD - 1 CARRIAGE OF MATERIALS

S.No.

Description

1.3

Loading in or unloading cement from

the Railway wagon at siding and
carrying the same from or into
godowns adjacent to the siding,
including stacking the same properly
in rows upto any height as per the
direction of Engineer-in-charge,
sweeping the wagons and screening
the swept cement and filling in bags
complete.

1.4

Loading in or unloading from the

Railway wagon as per the
direction of Engineer-in-charge.

1.4.1

1.4.2

1.4.3

Unit

Rate `

Tonne

61.90

Steel

Tonne

91.65

G.I.,C.I.,R.C.C or C.C. pipes

upto 500 mm dia. And similar
heavy materials.

Tonne

54.50

Tonne

103.05

Heavy materials where each piece

made or bundle, crate or case weighs
such more than one tonne and
R.C.C, C.I. loading and concrete
pipes above 500 mm dia.

SUB HEAD - 1 CARRIAGE OF MATERIALS

Remarks
5

The rates will be

applicable in all cases
whether materials are
unloaded or loaded
from Railway siding or
directly unloaded on or
loaded from transport.

No deduction shall
be from carriage
rates for direct
unloading or loading.

67

68

SUB HEAD : 2.0

EARTH WORK

69

70

BASIC RATES (SH: 2.0 EARTH

WORK)

Code
No.

Description

0003

Hire charges of Diesel Road Roller - 8 to 10 tonne

0017

Hire and running charges of tipper

0018

Hire and running charges of loader

0020

Hydraulic Excavator (3D) with driver and fuel

0101

Bhisti

0103

Blacksmith 2nd class

0112

Carpenter 2nd class

0113

Chowkidar

0114

Beldar

0115

Coolie

0124

Mason (brick layer) 2nd class

0128

Mate

0132

Rock Excavator

0133

Rock Breaker

0134

Rock Hole Driller

0135

Stone Chiseller

0302

Safeda ballies 125 mm diameter

0325

Blasting powder

0771

Kerosene oil

1197

Second class kail wood in scantling

1198

Second class kail wood in planks

1235

Diesel oil

1980

Fly ash

2204

Carriage of timber

2262

Carriage of fly ash

2335

Carriage of Jamuna sand

2342

Carriage of Solvent / Diesel.

6501

Sand zone V (Jamuna)

7022

Chlorpyriphos 20% E.C. / Lindane 20% E.C.

9999

Sundries

Unit

Rate `

day

1500.00

day

1700.00

day

5000.00

day

8000.00

day

363.00

day

399.00

day

399.00

day

329.00

day

329.00

day

329.00

day

399.00

day

363.00

day

329.00

day

329.00

day

329.00

day

363.00

metre

42.00

kilogram

35.00

litre

48.00

10 cudm

260.00

10 cudm

260.00

litre

55.49

cum

8.00

cum

121.70

cum

106.49

cum

106.49

quintal

10.65

cum

600.00

litre

160.00

L.S.

1.78

SUB HEAD : 2 - EARTH WORK

71

Code
No.

2.1

2.2

2.3

2.4

Description

Earth work in surface excavation not exceeding 30 cm in depth but

exceeding 1.5 m in width as well as 10 sqm on plan including
disposal of excavated earth upto 50 m and lift upto 1.5 m,
disposed soil to be levelled and neatly dressed :
2.1.1
All kinds of soil
Earth work in rough excavation, banking excavated earth in layers
not exceeding 20 cm in depth, breaking clods, watering, rolling
each layer with tonne roller or wooden or steel rammers, and
rolling every 3rd and top-most layer with power roller of minimum 8
tonnes and dressing up in embankments for roads, flood banks,
marginal banks and guide banks or filling up ground depressions,
lead upto 50 m and lift upto 1.5 m :
2.2.1
All kinds of soil
Banking excavated earth in layers not exceeding 20 cm in depth,
breaking clods, watering, rolling each layer with tonne roller, or
wooden of steel rammers, and rolling every 3rd and top-most layer
with power roller of minimum 8 tonnes and dressing up, in
embankments for roads, flood banks, marginal banks, and guide
banks etc., lead upto 50 m and lift upto 1.5 m :
2.3.1
All kinds of soil
Deduct for not rolling with power roller of minimum 8 tonnes for
banking excavated earth in layers not exceeding 20 cm in depth.

2.5

Deduct for not watering the excavated earth for banking

2.6

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means over areas (exceeding 30cm in depth.
1.5 m in width as well as 10 sqm on plan) including disposal of
excavated earth, lead upto 50m and lift upto 1.5m, disposed earth
to be levelled and neatly dressed.

2.7

2.8

2.9

2.6.1
All kinds of soil
Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means over areas (exceeding 30 cm in
depth, 1.5 m in width as well as 10 sqm on plan) including
disposal of excavated earth, lead upto 50 m and lift upto 1.5 m,
disposed earth to be levelled and neatly dressed.
2.7.1
Ordinary rock
2.7.2
Hard rock (requiring blasting)
2.7.3
Hard rock (blasting
prohibited)
Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan), including dressing of
sides and ramming of bottoms, lift upto 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
2.8.1
All kinds of soil.
Excavation work by mechanical means (Hydraulic excavator)/
manual means in foundation trenches or drains (not exceeding
1.5m in width or 10 sqm on plan), including dressing of sides
and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soils as directed,
within a lead of 50 m.

Unit

100 sqm

Rate `

5,044.15

cum

383.10

cum
cum

241.70
3.00

cum

16.85

cum

155.60

cum
cum
cum

244.60
418.15
618.10

cum

157.50

2.9.1

72

Ordinary rock

cum

263.50

SUB HEAD : 2 - EARTH WORK

Code No.

2.10

2.10.1

2.11

2.12

2.13

Description

Unit

Rate `

2.9.2
Hard rock (requiring blasting)
2.9.3
Hard rock (blasting
prohibited)
Excavating trenches of required width for pipes, cables, etc
including excavation for sockets, and dressing of sides, ramming of
bottoms, depth upto 1.5 m, including getting out the excavated soil,
and then returning the soil as required, in layers not exceeding 20
cm in depth, including consolidating each deposited layer by
ramming, watering, etc. and disposing of surplus excavated soil
as directed, within a lead of 50 m :
All kinds of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia.
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not
exceeding 300 mm dia
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not
exceeding 600 mm
Extra for excavating trenches for pipes, cables etc. in all kinds of
soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5 metre).
Extra for excavating trenches for pipes, cables, etc, in all kinds of
soil for depth exceeding 3 m in depth, but not exceeding 4.5 m.
(Rate is over corresponding basic item for depth upto 1.5 metre.)
Excavating trenches of required width for pipes, cables, etc,
including excavation for sockets, depth upto 1.5 m, including
getting out the excavated materials, returning the soil as
required in layers not exceeding 20 cm in depth, including
consolidating each deposited layers by ramming, watering etc.,
stacking serviceable material for measurements and disposal of
unserviceable material as directed,
within a lead of 50 m :

cum
cum

454.35
620.55

metre

127.55

metre

208.30

metre

325.20

metre

136 %

metre

349%

metre

181.85

metre

450.30

metre

518.15

metre

273.10

metre

676.25

metre

718.10

metre

351.65

metre

870.70

metre

1001.90

2.13.1
Ordinary rock :
2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding
300 mm dia
2.13.1.3 Pipes, cables exceeding 300 mm dia but not exceeding
600 mm dia
Hard rock (requiring blasting)
2.13.2
2.13.2.1 Pipes, cables etc. not exceeding 80 mm dia
2.13.2.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding
300 mm dia
2.13.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding
600 mm dia
Hard rock (blasting prohibited)
2.13.3
2.13.3.1 Pipes, cables etc. not exceeding 80 mm dia
2.13.3.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding
300 mm dia
2.13.3.3 Pipes, cables etc. exceeding 300 mm dia but not
exceeding 600 mm dia
2.14

Extra for excavating trenches for pipes, cables, etc. in

ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3

m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
SUB HEAD : 2 - EARTH WORK

metre

106.00%

73

Code
No.

Description

Extra for excavating trenches for pipes, cables, etc. in ordinary/hard

rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over
corresponding basic item for depth upto 1.5 metre).
Close timbering in trenches including strutting, shoring and
2.16
packing cavities (wherever required) complete. (Measurements to
be taken of the face area timbered).
2.16.1
Depth not exceeding 1.5 m
2.16.2
Depth exceeding 1.5 m but not exceeding 3
m
2.16.3
Depth exceeding 3 m but not exceeding 4.5
m
2.17
Close timbering in case of shafts, wells, cesspits, manholes and
the like including strutting, shoring and packing cavities (wherever
required) etc. complete. (Measurements to be taken of the face
area timbered).
2.17.1
Depth not exceeding 1.5 m
2.17.2
Depth exceeding 1.5 m but not exceeding 3
m
2.17.3
Depth exceeding 3 m but not exceeding 4.5
m
2.18
Close timbering over areas including strutting, shoring and
packing cavities (wherever required) etc. complete. (Measurements
to be taken of the face area timbered) :
2.18.1
Depth not exceeding 1.5 m
2.18.2
Depth exceeding 1.5 m but not exceeding 3
m
2.18.3
Depth exceeding 3 m but not exceeding 4.5
m
2.19
Extra for planking, strutting and packing materials for cavities (in
close timbering) if required to be left permanently in position. (Face
area of timber permanently left to be measured).
2.20
Open timbering in trenches including strutting and shoring
complete (measurements to be taken of the face area timbered):
2.20.1
Depth not exceeding 1.5 m
2.20.2
Depth exceeding 1.5 m but not exceeding 3
m
2.20.3
Depth exceeding 3 m but not exceeding 4.5
m
2.21
Open timbering in case of shafts, wells, cesspits, manholes and
the like including strutting and shoring complete (Measurements
to be taken of the face area timbered):
2.21.1
Depth not exceeding 1.5 m
2.21.2
Depth exceeding 1.5 m but not exceeding 3
m
2.21.3
Depth exceeding 3 m but not exceeding 4.5
m
2.22
Open timbering over areas including strutting, shoring etc.
complete. (Measurements to be taken of the face area timbered):
2.22.1
Depth not exceeding 1.5 m
2.22.2
Depth exceeding 1.5 m but not exceeding 3
m

Unit

Rate `

2.15

metre

sqm

sqm

264.00%

108.10
sqm
113.95
127.25

sqm
112.50 sqm
125.10
sqm
138.35

sqm

sqm
96.10 sqm
103.05
110.50

sqm

1384.85

sqm

sqm
55.80 sqm
59.55
65.60

sqm

sqm
48.55 sqm
54.45
62.15

2.22.3
Depth
exceeding 3

m but not exceeding 4.5 m

2.23

2.24

74

Extra for planking and strutting in open timbering if required to be

left permanently in position. (Face area of the timber permanently left to
be measured).
Extra rates for quantities of works, executed :
2.24.1
In or under water and/or liquid mud, including pumping
out water as required.
2.24.2
In or under foul position, including pumping out water
as required

sqm

sqm
33.25 sqm
37.35
43.80

sqm

713.55

metre depth 20.00%

metre depth 25.00%

SUB HEAD : 2 - EARTH WORK

Code
No.

2.25

2.26

2.27
2.28

2.29

2.30

2.31

2.32
2.33

Description

Note for item no. 2.24:- The extra percentage rate is applicable in
respect of each item but limited to quantities of work executed in
these difficult conditions. The unit, namely, metre depth, to be
considered for payment, shall be the depth measured from the sub
soil water level upto the centre of gravity of the quantity executed
in difficult conditions. The depth shall be reckoned correct to 0.1
metre. 0.05 metre or more shall be taken as 0.1 metre and less
than 0.05 metre ignored.
Filling available excavated earth (excluding rock) in trenches,
plinth, sides of foundations etc. in layers not exceeding 20cm in
depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m.
Extra for every additional lift of 1.5 m or part thereof in excavation /
banking excavated or stacked materials.
2.26.1
All kinds of soil
2.26.2
Ordinary or hard
rock
Supplying and filling in plinth with Jamuna sand under floors, including
watering, ramming, consolidating and dressing complete.
Surface dressing of the ground including removing vegetation and
inequalities not exceeding 15 cm deep and disposal of rubbish,
lead upto 50 m and lift upto 1.5 m.
2.28.1
All kinds of soil
Ploughing the existing ground to a depth of 15 cm to 25 cm and
watering the same.
2.29.1
All kinds of soil
Excavating holes more than 0.10 cum & upto 0.5 cum including
getting out the excavated soil, then returning the soil as required
in layers not exceeding 20 cm in depth, including consolidating
each deposited layer by ramming, watering etc, disposing of
surplus excavated soil, as directed within a lead of 50 m and lift
upto 1.5 m.
2.30.1
All kinds of soil
2.30.2
Ordinary rock
2.30.3
Hard rock (requiring blasting)
2.30.4
Hard rock (blasting
prohibited)
Clearing jungle including uprooting of rank vegetation, grass,
brush wood, trees and saplings of girth upto 30 cm measured at a
height of 1m above ground level and removal of rubbish upto a
distance of
50 m outside the periphery of the area cleared.
Clearing grass and removal of the rubbish upto a distance of 50
m outside the periphery of the area cleared.
Felling trees of the girth (measured at a height of 1 m above
ground level), including cutting of trunks and branches, removing
the roots and stacking of serviceable material and disposal of
unserviceable material.
2.33.1
Beyond 30 cm girth upto and including 60 cm girth
2.33.2

Beyond 60 cm girth upto and including 120 cm girth

Unit

Rate `

cum

112.40

cum
cum

46.25
82.95

cum

910.25

100sqm

1,245.75

100sqm

1,261.70

each
each
each
139.10
each

50.05
81.85

188.95

100sqm

642.00

100sqm

328.60

each

196.70

2.33.3

Beyond 120 cm girth upto and including 240 cm

girth
2.33.4

Above 240 cm girth

SUB HEAD : 2 - EARTH WORK

each
871.10 each
4,029.05
each
8,080.45

75

Code No.

Description

Rate `

litre

185.95

metre

15.40

metre

22.70

sqm

118.90

metre

17.50

metre
cum

200.70
33.95

cum

132.95

cum

112.40

2.34

2.35

2.36
2.37

2.38

Supplying chemical emulsion in sealed containers

including delivery as specified.
2.34.1
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of
chemical emulsion) :
2.35.1
Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres / sqm of the vertical
surface of the substructure to a depth of 300 mm
including excavation channel along the wall & rodding etc.
2.35.1.1 complete:
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
2.35.2
Along the external wall below concrete or masonry apron
using chemical emulsion @ 2.25 litres per linear metre
2.35.2.1 including drilling and plugging holes etc.:
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
2.35.3
Treatment of soil under existing floors using chemical
emulsion @ one litre per hole, 300 mm apart including
drilling 12 mm diameter holes and plugging with cement
2.35.3.1 mortar 1 :2 (1 cement : 2 Coarse sand) to match the
existing floor :
2.35.4
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Treatment of existing masonry using chemical emulsion
@ one litre per hole at 300 mm interval including drilling
2.35.4.1 holes at 45 degree and plugging them with cement mortar
1:2 (1 cement : 2 coarse sand) to the full depth of the hole
2.35.5
:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Treatment at points of contact of wood work by chemical
emulsion Chlorpyriphos/ Lindane (in oil or kerosene
based solution) @ 0.5 litres per hole by drilling 6 mm dia
holes at downward angle of 45 degree at 150 mm centre
to centre
and sealing the same.
Deduct for disposed soil not levelled and neatly dressed.
Supply and stacking of Fly ash conforming to IRC- 58 at site,
including carriage, loading , unloading & stacking up to any lead
(measured
stacks will be reduced by 20% for payment).

Unit

Filling with available fly ash and earth (excluding rock) in trenches
or embankment in layers (each layer should not exceed 15 cm),
with intermediate layer of compacted earth (Soil density of 98%)
after every four layers of compacted depth of fly ash, sides & top
layer of filling shall be done with earth having total minimum
compacted thickness 30 cm or as decided by Engineer -incharge, including compacting each layer by rolling/ ramming and
watering, all complete as per drawing and direction of Engineer-incharge.

76

SUB HEAD : 2 - EARTH WORK

SUB HEAD : 3.0

MORTARS

77

78

BASIC RATES (SH: 3.0 MORTARS)

Code
No.

0101
011
4
0367
0368
0784
0811
0982
0983
115
9
118
2
2203
2209
2261
2268
9999

Unit

Rate `

day

363.00

day

329.00

Description

Bhisti
Beldar

tonne

Portland Cement

6300.00 tonne

White Cement

14000.00 cum

Marble dust/ powder

1000.00 cum

Mud (dry)

65.00 cum

Coarse sand (zone

1200.00 cum

III) Fine sand (zone

700.00 cum

IV) Stone dust

1100.00 cum

Surkhi

700.00 cum

Carriage of coarse

106.49 tonne

sand Carriage of

94.65 cum

cement

106.49 cum

Carriage of fine sand (1 part badarpur sand: 2 parts jamuna

sand) Carriage of marble dust and/or marble chips
Sundries

106.49
L.S.

1.78

SUB HEAD : 3 - MORTARS

79

3.0 MORTAR
Note : These rates are exclusive of water charges, overheads and contractors profit.
Code
No.

3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19

Description

Unit

Rate `

Cement mortar 1:1 (1 cement : 1 fine sand)

cum

7441.25

Cement mortar 1:2 (1 cement : 2 fine sand).

cum

5458.65

Cement mortar 1:3 (1 cement : 3 fine sand).

cum

4468.35

Cement mortar 1:4 (1 cement : 4 fine sand).

cum

3637.05

Cement mortar 1:5 (1 cement : 5 fine sand).

cum

3189.40

Cement mortar 1:6 (1 cement : 6 fine sand).

cum

2805.75

Cement mortar 1:2 (1 cement : 2 coarse sand).

cum

5933.65

Cement mortar 1:3 (1 cement : 3 coarse sand).

cum

5003.35

Cement mortar 1:4 (1 cement : 4 coarse sand).

cum

4172.05

Cement mortar 1:5 (1 cement : 5 coarse sand).

cum

3724.40

Cement mortar 1:6 (1 cement : 6 coarse sand).

cum

3340.75

Cement mortar 1:2 (1 cement : 2 stone dust).

cum

5838.65

Cement mortar 1:2 (1 cement : 2 marble dust).

cum

5743.65

Cement mortar 1:5 (1 cement : 5 marble dust).

cum

3510.40

White cement mortar 1:2 (1 white cement : 2 marble dust).

cum

White cement mortar 1:3 (1 white cement : 3 marble dust).

10979.65

White cement mortar 1:5 (1 white cement : 5 marble dust).

cum
8716.35

Mud mortar

cum

Mortar in lime , surkhi ( 50% red and 50% light yellow) and
marble

cum

5897.40

403.30

dust 1:1.5:0.5
cum

2474.95

80

SUB HEAD : 3 - MORTARS

SUB HEAD : 4.0

CONCRETE WORK

81

82

BASIC RATES (SH: 4.0 CONCRETE

WORK)

Code
No.

Description

0002

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

0011

Hire charges of Pump set of capacity 4000 litres/hour

0012

Vibrator (Needle type 40 mm)

0029

Carriage of concrete by transit mixer

0101

Bhisti

0114

Beldar

0115

Coolie

0116

Fitter (grade 1)

0123

Mason (brick layer) 1 st class

0124

Mason (brick layer) 2nd class

0131

Painter

0155*

Mason (average)

0287

Brick Aggregate (Single size) : 40 mm nominal size

0293

Stone Aggregate (Single size) : 40 mm nominal size

0295

Stone Aggregate (Single size) : 20 mm nominal size

0296

Stone Aggregate (Single size) : 12.5 mm nominal size

0297

Stone Aggregate (Single size) : 10 mm nominal size

0309

Paving bitumen of grade VG-10 of approved quality

0367

Portland Cement

0370

Coal (steam)

0771

Kerosene oil

0982

Coarse sand (zone III)

0983

Fine sand (zone IV)

1213

Water proofing materials

1980

Fly ash

2202

Carriage of stone aggregate below 40 mm nominal size

2203

Carriage of coarse sand

2206

Carriage of stone aggregate 40 mm nominal size and above

2209

Carriage of cement

2211

Carriage of tar / bitumen

2260

Carriage of brick aggregate

2261

Carriage of fine sand (1 part badarpur sand: 2 parts jamuna sand)

Unit

Rate `

day

800.00

day

600.00

day

350.00

km/cum

30.00

day

363.00

day

329.00

day

329.00

day

435.00

day

435.00

day

399.00

day

399.00

day

417.00

cum

600.00

cum

1050.00

cum

1175.00

cum

1175.00

cum

1175.00

tonne

50600.00

tonne

6300.00

quintal

400.00

litre

48.00

cum

1200.00

cum

700.00

kilogram

35.00

cum

8.00

cum

106.49

cum

106.49

cum

115.75

tonne

94.65

tonne

106.49

cum

115.75

cum

106.49

SUB HEAD : 4 - CONCRETE WORK

83

Code
No.

2262
7319
7326
7327
7328
7329
7330
7331
7332
7333
7334
8732
9999

Description

Unit

Rate `

Carriage of flyash

cum

106.49

Wall form panel 1250x500 mm

each

1050.00

Corner angle 45x45x5 mm 1.50 m

each

300.00

long 100 mm channel shoulder 2.5 m

each

1160.00

long Double clip ( bridge clip)

each

97.00

Single clip

each

77.00
metre

M.S. tube 40 mm dia

280.00 each

Wall form panel 1250x450 mm

Corner angle 45x45x5 mm 2.50 m

1040.00 each

long Column clamp 450x1070 mm

340.00 each
1220.00 each

Prop 2 m ( 2-3.5 m)

830.00

Synthetic ployster triangular fibre of length 12 mm, effective

diameter 10-40 microns and specific gravity of 1.34 to 1.40
Sundries

kg
L.S.

365.00
1.78

84

SUB HEAD : 4 - CONCRETE WORK

4.0 CONCRETE WORK

Code No.

Description

Unit

Rate `

CEMENT CONCRETE (CAST -IN- SITU)

4.1

Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :
4.1.1
4.1.2
4.1.3

cum

7530.35

1:1:3 (1 Cement: 1 coarse sand: 3 graded stone aggregate

20 mm nominal size)

cum

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)

cum

5970.60
5466.30

4.1.4

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40

mm nominal size)
cum

5335.25

4.1.5

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size)
cum

4834.30

4.1.6

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40

mm nominal size)
cum

4672.50

4.1.7

1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm

nominal size)
cum

4399.55

4.1.8

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40

mm nominal size)
cum

4301.15

4.1.9

1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm

nominal size)
cum

4028.15

4.1.10

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate

40 mm nominal size)

4004.00
cum

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40

mm nominal size)

cum

4.1.11

4.2

1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20

mm nominal size)

3721.65

4.1.12

1:2:3:9 (1 ordinary portland cement : 2 Fly ash : 3 coarse

sand : 9 graded stone aggregate 40 mm nominal size)
cum

4178.90

4.1.13

1:2:4:11 (1 ordinary portland cement : 2 fly ash : 4 coarse

sand : 11 graded stone aggregate 40 mm nominal size)

3836.30
cum

Providing and laying cement concrete in retaining walls, return walls,

walls (any thickness) including attached pilasters, columns, piers,
abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,
sunken floor,etc., up to floor five level, excluding the cost of centering,
shuttering and finishing:
4.2.1
4.2.2
4.2.3
4.2.4

1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20

mm nominal size)

cum

1:1:3 (1 cement:1 coarse sand:3 graded stone aggregate

20 mm nominal size)

cum

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)
cum
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40
mm nominal size)
cum

8514.05
6954.30

SUB HEAD : 4 - CONCRETE WORK

6450.00
6318.95

85

Code No.

Description

4.2.5
4.2.6
4.2.7
4.2.8

4.3

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size)
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40
mm nominal size)
1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40
mm nominal size)
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate
40 mm nominal size)

Unit

Rate `

5818.00
cum
5656.20
cum
5383.25
cum
4981.75
cum

Centering and shuttering including strutting, propping etc. and emoval of

form work for :
4.3.1
4.3.2

4.4

Foundations, footings, bases for columns

Retaining walls, return walls, walls (any thickness) including
attached pilasters, buttresses, plinth and string courses fillets,
kerbs and steps etc.
4.3.3
Columns, piers, abutments, pillars, posts and struts
Providing and laying cement concrete in kerbs, steps and the like at
or near ground level excluding the cost of centering, shuttering and finishing.
4.4.1
4.4.2

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size)

sqm

196.45

sqm
sqm

360.80
453.35

5466.30
cum
4834.30
cum

CEMENT CONCRETE (PRE-CAST)

4.5
Providing and fixing up to floor five level precast cement concrete string
or lacing courses, copings, bed plates, anchor blocks, plain window
sills, shelves, louvers, steps, stair cases, etc., including hoisting and
setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand),
cost of required centering complete.
4.5.1
4.5.2
4.5.3

4.6

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate

20 mm nominal size)
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size)
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size)

6774.05
cum
6269.80
cum
5637.80
cum

Providing and fixing at or near ground level precast cement concrete in

kerbs, edgings etc. as per approved pattern and setting in position with
cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of
required centering, shuttering complete.
4.6.1

4.7

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)
Providing and fixing up to floor five level precast cement concrete solid
block, including hoisting and setting in position with cement mortar 1:3 (1
cement : 3 coarse sand), cost of required centering, shuttering complete :
4.7.1

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

4.7.2

1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

5714.95

cum

86

9334.80

cum

8702.80

SUB HEAD : 4 - CONCRETE WORK

Code
No.

4.8

Description

Unit

Rate `

cum

7128.80

cum

6838.20

each

546.65

sqm

257.80

sqm

314.85

Providing and fixing up to floor five level precast cement concrete

hollow block, including hoisting and setting in position with cement
mortar 1:3 (1 cement : 3 coarse sand), cost of required centering,
shuttering complete.
4.8.1

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

4.8.2
1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate
20 mm nominal size)
4.9

Precasting and placing in position 125 mm dia Bollards 600 mm high

of required shape, including providing M.S. Pipe Sleeve 50 mm dia
300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm
long with 150x150x6mm M.S. plate welded at bottom and embedded
150 mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size), including necessary
excavation of size 250 x 250 x 450 mm deep for the same in
bitumen/concrete
pavement at specified spacing.
DAMP- PROOF COURSE

4.10

Providing and laying damp-proof course 40 mm thick with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
12.5 mm nominal size).

4.11
Providing and laying damp-proof course 50 mm thick with
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size).
4.12
4.13

Extra for providing and mixing water proofing material in cement concrete per 50 kg
work in doses by weight of cement as per manufacturers specification.
cement
Applying a coat of residual petroleum bitumen of grade of VG-10 of
approved quality using 1.7 kg per square metre on damp proof
course after cleaning the surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil.

48.15

sqm

132.00

cum

573.20

meter depth

426.15

cum

172.20

MISCELLANEOUS
4.14

Extra for concrete work in superstructure above floor V level for

each four floors or part thereof.

4.15

Extra for laying concrete in or under water and/or liquid mud

including cum per cost of pumping or bailing out water and removing
slush etc. complete.
Note for item No. 4.15 :- The quantity will be calculated by
multiplying the depth measured from the sub-soil water level up to
centre of gravity of concrete under sub-soil water level with quantity of
concrete in cum executed under sub-soil water. The depth of centre
of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be
taken as 0.1m and less than 0.05m ignored.

4.16

Extra for laying concrete in or under foul positions.

4.17

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1

cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand, including

finishing the top

smooth.
SUB HEAD : 4 - CONCRETE WORK

sqm

419.30

87

Code No.

Description

4.18

Extra for addition of synthetic Polyester triangular fibre of length 12mm,

effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in
cement concrete/RCC/Flooring/water retaining structures by using
125gms of synthetic Polyester triangular fibre for 50 Kg cement used
as
per directions of Engineer-in-Charge.
Per
Bag of 50 Kg
of cement

4.19

Unit

Rate `

53.00

Providing and laying in position ready mixed plain cement concrete,

using fly ash and cement content as per approved design mix and
manufactured in fully automatic batching plant and transported to site of
work in transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for plain cement
concrete work, including pumping of R.M.C. from transit mixer to site of
laying and curing, excluding the cost of centering, shuttering and
finishing, including cost of curing, admixtures in recommended
proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per
direction of the Engineer - in - charge.
Note : (1) Excess/less cement used than specified in this item is
payable/ recoverable separately. (2) Fly ash conforming to grade I of IS
3812 (Part-1) only be used as part replacement of OPC as per IS :
456. Uniform blending with cement is to be ensured in accordance
with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and
RMC.
4.19.1

All works upto plinth level :

4.19.1.1 M-15 grade plain cement concrete (cement content considered

@ 240 kg/cum)

5872.90
cum

4.19.1.2 M-10 grade plain cement concrete (cement content considered

@ 220 kg/cum)
4.19.2

5719.90
cum

All works above plinth and upto floor V level :

4.19.2.1 M-15 grade plain cement concrete (cement content considered

@ 240 kg. /cum)

cum

4.19.2.2 M-10 grade plain cement concrete (cement content considered

@ 220 kg/cum)
Note :- The above item shall be used judiciously where specified quality
of Fly Ash is available for mixing in concrete. Also, the guidelines issued
by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102
dated 9th April 2009 shall be followed in such cases.
4.20

Providing and laying in position ready mixed plain cement concrete, with
cement content as per approved design mix and manufactured in fully
automatic batching plant and transported to site of work in transit mixer
for all leads, having continuous agitated mixer, manufactured as per mix
design of specified grade for plain cement concrete work, including
pumping of R.M.C. from transit mixer to site of laying and curing,
excluding the cost of centering, shuttering and finishing, including cost
of curing, admixtures in recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve workability without
impairing strength and durability as per direction of the Engineer-in-

cum

charge
.

6417.05

88

6264.10

SUB HEAD : 4 - CONCRETE WORK

Code No.

Description

Unit

Rate `

cum

5996.70

cum

5843.75

Note : 1) Excess/less cement used than specified in this item is payable/

recoverable separately.
4.20.1

All works upto plinth level :

4.20.1.1 M-15 grade plain cement concrete (cement content considered

@ 240 kg/cum)
4.20.1.2 M-10 grade plain cement concrete (cement content considere
4.20.2

@ 220 kg/cum)
All works above plinth and upto floor V level :

4.20.2.1 M-15 grade plain cement concrete. (cement content considered

@ 240 kg. /cum)

6540.90
cum

4.20.2.2 M-10 grade plain cement concrete (cement content considered

@ 220 kg/cum)

6387.95
cum

SUB HEAD : 4 - CONCRETE WORK

89

90

SUB-HEAD : 5.0

REINFORCED CEMENT
CONCRETE

91

92

BASIC RATES (SH: 5.0 REINFORCED CEMENT CONCRETE)

Code
No.

0002
0004
0009
0011
0012
0025
0029
0052
0066
0070
0082
0101
0102
0103
0112
0114
0115
0116
0123
0124
0126
0128
0155*
0236
0295
0297
0302
0309
0313
0314
0316
0339
0367
0370
0596

Description

Unit

Rate `

Hire charges of Concrete Mixer 0.25 to 0.40 cum with

day

800.00

Hopper Production cost of concrete by batch mix plant

cum

350.00

piping work & accessories etc.

cum

150.00

Hire charges of Pump set of capacity 4000 litres/hour

day

600.00

Pumping charges of concrete including Hire charges of pump,

Vibrator (Needle type 40 mm)

day

350.00

Hire and running charges of light crane

day

2200.00

Carriage of concrete by transit mixer

km/cum

30.00

Front end loader 1 cum bucket capacity (incl POL)

hour

900.00

Batching and Mixing Plant @ 75 cum per hour

hour

2500.00

Generator 100 KVA/125 KVA

hour

500.00

Excavation of Diaphragm wall by Mechanical Grab

sqm

1500.00

Bhisti

day

363.00

Blacksmith 1 st class

day

435.00

Blacksmith 2nd class

day

399.00

Carpenter 2nd class

day

399.00

Beldar

day

329.00

Coolie

day

329.00

Fitter (grade 1)

day

435.00

Mason (brick layer) 1 st class

day

435.00

Mason (brick layer) 2nd class

day

399.00

Mason (for ornamental stone work) 1 st class

day

435.00

Mate

day

363.00

Mason (average)

day

417.00

reinforced) cement board 6 mm thick

sqm

210.00

Stone Aggregate (Single size) : 20 mm nominal size

cum

1175.00

Stone Aggregate (Single size) : 10 mm nominal size

cum

1175.00

Multi purpose fibre (high impact poly propelene

Safeda ballies 125 mm diameter

metre

42.00

Paving bitumen of grade VG-10 of approved quality

tonne

50600.00

Blown type petroleum bitumen of penetration 85/25 of approved quality

tonne

49600.00

Bitumen hot sealing compound : grade A

Kg

28.00

Bitumen solution primer of approved quality

litre

50.00

Flame retardant face insulating, Impregnated fibre board 12 mm

sqm

350.00

thick Portland Cement

tonne

6300.00

Coal (steam)

quintal

400.00

Bright finished or black enameled mild steel butt hinges

75x47x1.70 mm

10 Nos

65.00

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

93

Descript
ion

0639

Bri

0768

gh

0769

0770

fini

0982

sh

0983

ed

0992

or

1004

bl

1005

ac

1015

1021

en

1034

119

el

119

ed

mil

1224

1225

st

2200

ee

2202

2203

sc

2204

re

2205

ws

2209

25

2211

2261

2273

Ce

2302

2391

en

2392

2393

Co

2394

nc

2395

ret

2396

2397

Jal

2398

2399

50

2400

2401

2402

thi

2403

ck

Code
No.

2404

e
e
n
t
C
o
n
c
r
e
t
e
J
a
l
i
4
0
m
m
t
h
i
c
k
C
e
m
e
n
t
C
o
n

Fine sand (zone IV)

Unit

Rate `

100 Nos

38.00

Galvanised steel plain sheets

sqm

210.00

Average rate of Mild steel round bars for

sqm

180.00

reinforcement Twisted steel/ deformed bars

sqm

150.00

Mild steel expanded metal 20x60 mm strands

cum

1200.0

Hard drawn steel wire fabric

cum

Bolts and nuts up to 300 mm in length

quintal

700.00

Second class kail wood in scantling 10

quintal

5350.0

Second class kail wood in planks 10

quintal

Hard drawn steel wire

sqm

4500.0

Mild steel flat strap fitting

sqm

Carriage of steam coal

quintal

Carriage of stone aggregate below 40 mm nominal

cudm

size Carriage of coarse sand

cudm

300.00

Carriage of timber

quintal

440.00

Carriage of steel

quintal

5600.0

Carriage of cement

tonne

Carriage of tar / bitumen

cum

260.00

Carriage of fine sand (1 part badarpur sand: 2 parts jamuna

cum

260.00

sand) Carriage of A.C.sheet and accessories

cum

5500.0

Carriage of G.I.sheet and accessories

tonne

Strips-Aluminium fluted 3.15 mm thick and 150 mm wide

tonne

5000.0

Strips Aluminium fluted 3.15 mm thick and 200 mm wide

tonne

1 mm thick Stainless Steel Cover plate grade 304

cum

121.70

Coupler 16 mm dia

tonne

106.49

Coupler

mm

tonne

106.49

dia

25

metre

121.70

mm dia Coupler

metre

94.65

28

20

Coupler
mm

4759.0

dia

kg

94.65

mm

each

106.49

Coupler

dia

each

106.49

Complete Roof Joint of 100

each

94.65

mm Complete Roof Joint of

each

94.65

150 mm Complete Roof Joint

each

228.00

of 200 mm Epoxy adhesive

metre

323.00

Floor Joint of 100 mm

Floor Joint of 150 mm

metre

275.00

32

metre

67.00

kg

88.00

metre

130.00

metre

192.00

231.00

4500.0

94

800.00 5000.00 150.00 4500.00

5000.00

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

Code
No.

2405
2409
2410
2411
2447
7178
7183
7281
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7342
7343
7344
7345
7346
8659
8953
8954
8955
9999

Description

Unit

Rate `

Floor Joint of 200 mm

Wall Joint of 100 mm
Wall Joint of 150 mm
Wall Joint of 200 mm
Hollock ballies 125 mm diameter
Chemical ASTMC-type I
Bentonite
Chemical ASTMC-type II
Plasticizer / super plasticizer
Wall form panel 1250x500 mm
Tie bolt 12 mm dia 100 mm length
Tie bolt 12 mm dia 150 mm length
Tie bolt 20 mm dia 150 mm length
Tie bolt 20 mm dia 225 mm length
Spring coil 12 mm
Plastic cone 12 mm dia
Corner angle 45x45x5 mm 1.50 m
long 100 mm channel shoulder 2.5 m
long Double clip ( bridge clip)
Single
M.S. tube 40 mm dia
Wall form panel 1250x450 mm
Corner angle 45x45x5 mm 2.50 m
long Column clamp 450x1070 mm
Prop 2 m ( 2-3.5 m)
Adjustable span ESO+SI (2.35-3.40)
Adjustable telescopic prop 3 m (2.02-3.75 m)
Beam clamp 300-380 mm (450-1070 mm)
each Prop 4 m
Double coupler
Water proof ply 12 mm thick
Micro Silica
Stop end tubes for diaphragmwall 600 mm dia.
Driving end tubes for diaphragm wall 600 mm
dia.
Sundries

metre
5400.00 metre
3400.00 metre
3700.00 metre
4000.00 metre
35.00 kg
110.00 tonne
3100.00 kg
170.00 Kg
38.00 each
1050.00 each
50.00 each
60.00 each
75.00 each
90.00 each
16.00 each
18.00 each
300.00 each
1160.00 each
97.00 each
77.00 metre
280.00 each
1040.00 each
340.00 each
1220.00 each
830.00 each
1900.00 each
1200.00 set
422.00 each
1170.00 each
55.00 sqm
650.00 kg
32.00 sqm
4.50 sqm
72.00
L.S.
1.78

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

95

Code No.

Description

Unit

Rate `

CAST-IN-SITU
5.1

Providing and laying in position specified grade of reinforced cement

concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
5.1.1
5.1.2
5.1.3

5.2

5.2.2
5.2.3

5.4

5.5

5.6

5.7

5.8

cum

7,789.95

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate

20 mm nominal size)

cum

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)

cum

6,230.20
5,725.90

Reinforced cement concrete work in walls (any thickness), including

attached pilasters, buttresses, plinth and string courses, fillets, columns,
pillars, piers, abutments, posts and struts etc. up to floor five level,
excluding cost of centering, shuttering, finishing and reinforcement :
5.2.1

5.3

1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20

mm nominal size)

1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20

mm nominal size)

cum

8,634.05

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate

20 mm nominal size)

cum

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)

cum

7,074.30
6,570.00

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15 landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral stair cases up to floor
five level, excluding the cost of centering, shuttering, finishing and
reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm
nominal size).

cum

Providing and laying up to floor five level reinforced cement concrete in

kerbs, steps and the like, excluding the cost of centering, shuttering,
finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size).

cum

Reinforced cement concrete work in arches, archribs, domes, vaults,

shells, folded plate and roofs having slope more than 15 up to floor
five level, excluding the cost of centering, shuttering, finishing and
reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size).

cum

Reinforced cement concrete work in chimneys, shafts, up to floor five

level, excluding the cost of centering, shuttering, finishing and
reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size).

cum

Reinforced cement concrete work in well-steining, excluding the cost of

centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement:
2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

cum

Reinforced cement concrete work in vertical and horizontal fins

individually or forming box louvers, facias and eaves boards up to
floor five level, excluding the cost of centering, shuttering, finishing and
reinforcement, with 1:1:3 (1 cement : 1 coarse sand : 3 graded stone

aggreg
ate 20
m
m
no
mi
nal
siz
e).
cu
m

7,047.25

6,778.20

6,362.85

6,669.35

5,496.85

6,690.80

96

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

Code
No.

5.9

Description

Unit

Rate `

sqm

196.45

plinth and string courses etc.

sqm

360.80

5.9.3

Suspended floors, roofs, landings, balconies and access platform

sqm

401.65

5.9.4

Shelves (Cast in situ)

sqm

401.65

5.9.5

Lintels, beams, plinth beams, girders, bressumers and cantilevers

sqm

332.15

5.9.6

Columns, Pillars, Piers, Abutments, Posts and Struts

sqm

453.35

5.9.7

Stairs, (excluding landings) except spiral-staircases

sqm

395.65

5.9.8

Spiral staircases (including landing)

sqm

363.65

5.9.9

Arches, domes, vaults up to 6 m span

sqm

1,066.30

5.9.10

Extra for arches, domes, vaults exceeding 6 m span

sqm

446.65

5.9.11

Chimneys and shafts

sqm

360.80

5.9.12

Well steining

sqm

214.55

5.9.13

Vertical and horizontal fins individually or forming box louvers

band, facias and eaves boards

sqm

587.35

Extra for shuttering in circular work (20% of respective centering

and shuttering items)

sqm

20.00%

sqm

196.45

5.9.16.1 Under 20 cm wide

metre

116.40

5.9.16.2 Above 20 cm wide

sqm

508.55

5.9.17

Cornices and mouldings

sqm

549.20

5.9.18

Small surfaces such as cantilever ends, brackets and ends of

steps, caps and bases to pilasters and columns and the like

sqm

483.70

5.9.19

Weather shade, Chajjas, corbels etc., including edges

sqm

492.35

5.9.20

Suspended floors, roofs, landings, balconies and access platform.

with water proof ply 12 mm thick

sqm

493.55

sqm

423.65

each set
each set
each set
each set

140.40
152.05
169.45
186.90

FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for :
5.9.1

Foundations, footings, bases of columns, etc. for mass concrete

5.9.2

Walls (any thickness) including attached pilasters, butteresses,

5.9.14

5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as

in cornices, window sills, string courses, bands, copings, bed plates,
anchor blocks and the like
5.9.16

5.10

Edges of slabs and breaks in floors and walls

5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers.

with water proof ply 12 mm thick
Providing and fixing tie bolt, spring coil and plastic cone in wall
shuttering complete as per the direction of Engineer-in-charge.
5.10.1 12 mm dia. & 100 mm length
5.10.2 12 mm dia. & 150 mm length
5.10.3 20 mm dia. & 150 mm length
5.10.4 20 mm dia.& 225 mm length

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

97

Code
No.

5.11

5.12

5.13

5.14

5.15

5.16

15.17

5.18

Description

Unit

Rate `

sqm

159.05

cum

6,447.95

cum

8,797.80

cum

9,894.35

cum

8,191.40

cum

12,174.70

louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including

the cost of required centering, shuttering but excluding the cost of
reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size).
cum

7,177.85

Extra for additional height in centering, shuttering where ever required

with adequate bracing, propping etc., including cost of de-shuttering
and decentering at all levels, over a height of 3.5 m, for every additional
height of 1 metre or part thereof (Plan area to be measured).
5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan
area to be measured)
PRE - CAST R.C.C.
Providing, hoisting and fixing up to floor five level precast reinforced
cement concrete work in string courses, bands, copings, bed plates,
anchor blocks, plain window sills and the like, including the cost of
required centering, shuttering but excluding cost of reinforcement, with
1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm
nominal size).
Providing, hoisting and fixing up to floor five level precast reinforced
cement concrete in small lintels not exceeding 1.5 m clear span up to
floor five level, including the cost of required centering, shuttering but
excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size).
Providing, hoisting and fixing up to floor five level precast reinforced
cement concrete in mouldings as in cornices, windows sills etc.,
including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost
of required centering, shuttering but excluding the cost of reinforcement,
with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size).
Providing, hoisting and fixing up to floor five level precast reinforced
cement concrete in lintels, beams and bressumers, including setting in
cement mortar 1:3 (1 cement : 3 coarse sand), cost of required
centering and shuttering but excluding the cost of reinforcement, with
1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size).
Providing, hoisting and fixing up to floor five level precast reinforced
cement concrete in shelves, including setting in cement mortar 1:3 (1
cement : 3 coarse sand), cost of required centering, shuttering and
finishing with neat cement punning on exposed surfaces but
excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm nominal size).
Providing, hoisting and fixing up to floor five level precast reinforced
cement concrete in vertical & horizontal fins, individually or forming box

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand:

4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm
dia mild steel wire, including centering and shuttering, roughening
cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine
sand) etc. complete, excluding plastering of the jambs, sills and soffits.
5.18.1

50 mm thick

sqm

729.95

5.18.2

40 mm thick

sqm

638.90

5.18.3

25 mm thick

sqm

604.05

98

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

Code
No.

5.19

5.20

5.21

5.22

Description

Unit

Rate `

Encasing rolled steel sections, in beams and columns, with cement

concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5
mm nominal size), including centering and shuttering complete but
excluding cost of reinforcement.

cum

8,953.65

Encasing rolled steel section in grillages with cement concrete 1:2:4 (1

cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal
size), including centering and shuttering but excluding cost of expanded
metal
and hangers.

cum

ENCASING ROLLED STEEL SECTION

Extra for providing and fixing expanded metal mesh of size 20x60 mm
and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for
encasing of rolled steel sections in beams, columns and grillages,
excluding cost of hangers.

6024.05

393.65
sqm

STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.

5.22A

5.22.1
bars

Mild steel and Medium Tensile steel

5.22.2

Hard drawn steel wire

5.22.3

Cold twisted bars

5.22.4

Hot rolled deformed bars

5.22.5

Hard drawn steel wire fabric

5.22.6

Thermo-Mechanically Treated bars

Kg

64.95

Kg

76.60

Kg

68.10

Kg

68.10

Kg

76.85

Kg

68.10

Kg

64.95

Kg

76.60

Kg

68.10

Kg

68.10

Kg

76.85

Kg

68.10

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.
5.22A.1 Mild steel and Medium Tensile steel
bars
5.22A.2
Hard drawn steel wire
5.22A.3
Cold twisted bars
5.22A.4
Hot rolled deformed bars
5.22A.5
Hard drawn steel wire fabric
5.22A.6
Thermo-Mechanically Treated bars
MISCELLANEOUS

5.23
5.24

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick

cement mortar 1:3 (1 Cement : 3 fine sand).
Extra for rendering smooth the top of suspended floors, landings
and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2
coarse sand), including a floating coat of neat cement and protecting
the surface with a layer of 7.5 cm of earth laid over 15 mm of fine
sand in case of suspended floor and bricks laid in mud mortar in case
of landings and
steps, including subsequent removal and cleaning of the same.

sqm

134.70

sqm

89.20

5.25

Providing and fixing in position copper plate as per design for expansion
joints.

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

kg

325.80

99

Code
No.

5.26

5.27

5.28

5.29

Description

Unit

Rate `

per cm
depth per
cm width
per 100 m
per cm
depth per
cm width
per 100 m
per cm
depth per
100 m

698.20

5.29.1.1 150mm wide

metre

122.55

5.29.1.2 200mm wide

metre

164.65

5.29.2.1 150 mm wide

metre

330.05

5.29.2.2 200 mm wide

metre

460.60

Add for plaster drip course/ groove in plastered surface or moulding to

R.C.C. projections.

metre

30.75

cum

426.15

cum

172.20

Providing and filling in position, blown bitumen in expansion joints.

Providing and filling in position bitumen mix filler of Proportion 80 kg

of hot bitumen, 1 kg. of cement and 0.25 cubicmetre of coarse sand
for expansion joints.
Providing and fixing in position 12 mm thick bitumen impregnated
fibre board conforming to IS: 1838, including cost of primer, sealing
compo-und in expansion joints.
Providing and fixing sheet covering over expansion joints with iron
screws as per design.
5.29.1

5.29.2

5.30
5.31

224.90

446.90

Non-asbestos fibre cement board 6 mm thick as per IS: 14862.

Aluminium fluted strips 3.15 mm thick.

Extra for laying reinforced cement concrete in or under water and/

or liquid mud, including cost of pumping or bailing out water and removing
slush etc., complete.
Note For Item No. 5.31:- The quantity will be calculated by multiplying
the depth measured from the subsoil water level up to the centre of
gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in
cubic metre executed under subsoil water. The depth of centre of
gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be
taken as 0.1 m and less than 0.05 m ignored. No extra payment shall
be made for placing reinforcement or centering & shuttering under
sub - soil water conditions.

5.32

Extra for laying reinforced cement concrete in or under foul positions.

DESIGN MIX CONCRETE

5.33

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement
concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost of
centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate,
retard setting of concrete, improve workability without impairing strength
and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum.
Excess/ less cement used as per design mix is payable/recoverable
separately).
5.33.1 All works upto plinth level

cum

5.33.2 All works above plinth level upto floor V level

cum

6296.15
7014.55

100

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

Code
No.

5.34

Description

Unit

Rate `

cum

76.50

cum

152.95

cum
quintal

229.45
742.75

Extra for providing richer mixes at all floor levels.

Note:- Excess/less cement over the specified cement content used is
payable /recoverable separately.
5.34.1

5.35
5.36

5.37

Providing M-30 grade concrete instead of M-25 grade BMC /

RMC. (Note:- Cement content considered in M-30 is @ 340 kg/
kg/cum)
5.34.2 Providing M-35 grade concrete instead of M-25 grade BMC /
RMC. (Note : Cement content considered in M-35 is @ 350 kg/
cum)
5.34.3 Providing M-40 grade concrete instead of M-25 grade BMC /
RMC.(Note : Cement content considered in M-40 is @ 360 kg/
cum)
Add for using extra cement in the items of design mix over and above
the specified cement content therein.
Providing and placing in position precast reinforced cement concrete
waffle units, square or rectangular, as per design and shape for floors
and roofs in 1:1:3 (1 Cement : 1 coarse sand : 3 graded stone
aggregate 10 mm nominal size), including flush or deep ruled pointing
at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making
necessary holes of required sizes for carrying through service lines
etc., providing steel hooks for lifting etc, form work in precasting,
handling, hoisting, centering and cre-ction complete for all floor levels
but excluding the cost of reinforcement.
Providing and laying in position ready mixed M-25 grade concrete for
reinforced cement concrete work, using cement content as per
approved design mix, manufactured in fully automatic batching plant
and transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified
grade for reinforced cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying , excluding the cost of
centering, shuttering finishing and reinforcement, including cost of
admixtures in recommended proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve workability without impairing strength
and durability as per direction of the Engineer -in - charge.

cum

17292.75

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/recoverable
separately).

5.38
5.40

5.37.1

All works upto plinth level

cum

6,644.60

5.37.2

All works above plinth level upto floor V level

cum

7363.00

cum

174.20

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four
floors or part thereof.
Providing and laying in position ready mixed M-25 grade concrete
for reinforced cement concrete work, using fly ash and cement content
as per approved design mix, and manufactured in fully automatic
batching plant and transported to site of work in transit mixer for all
leads, having continuous agitated mixer, manufactured as per mix
design of specified grade for reinforced cement concrete work, including
pumping of R.M.C. from transit mixer to site of laying, excluding the
cost of centering, shuttering, finishing and reinforcement, including

cost of admixtures in recommended proportions as per IS : 9103 to

accelerate / retard setting of
SUB HEAD : 5 - REINFORCED CEMENT CONRETE

101

Code No.

Description

Unit

Rate `

concrete, improve workability without impairing strength and durability

as per direction of the Engineer - in - charge.
NOTE- (1) Cement content considered in this item is @ 330 kg/cum.
Excess/ less cement used as per design mix is payable/ recoverable
separately.
(2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as
part replacement of OPC as per IS : 456. Uniform blending with cement
to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000
in the items of BMC and RMC.
5.40.1

All works up to Plinth level.

cum

6561.20

5.40.2

All works above plinth & up to floor V level.

cum

7279.60

Note :- The above item shall be used judiciously where specified quality
of Fly Ash is available for mixing in concrete. Also, the guidelines issued
by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102
dated 9th April 2009 shall be followed in such cases.
5.41

5.42

Supplying and applying pre tested and approved water based

concrete curing compound to concrete/ masonry surface, all as per
manufacturers specification and direction of Engineer-in-charge.
5.41.1

Non pigmented wet curing compound

sqm

106.75

5.41.2

Pigmented wet curing compound

sqm

120.70

Coupler for 16 mm diameter reinforcement

each

122.35

bar 5.42.2 Coupler for 20 mm diameter reinforcement

each

166.45

bar 5.42.3 Coupler for 25 mm diameter reinforcement

each

230.20

bar 5.42.4 Coupler for 28 mm diameter reinforcement

each

316.90

bar

each

367.65

Providing and fixing tapered / parallel threaded couplers conforming to

IS code on Reinforcement Couplers for Mechanical Splices of Bars
for Concrete Reinforcement - Specification, to reinforcement bars
including threading, enlargement at connection by forging, protecting the
prepared reinforcement bars and related operations as required to
complete the works per direction of Engineer-in-Charge. (The length of
the bars in which coupler is to be provided should not be less than 4
metre, no deduction for labour and binding wire saved for not providing
lap length shall be made).
5.42.1

5.42.5
bar
5.43

5.44

Coupler for 32 mm diameter reinforcement

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm

thick as per design for expansion joints.
5.43.1

200 mm wide.

metre

577.45

5.43.2

300 mm wide.

metre

833.00

Providing and fixing of expansion joint system related with floor location
as per drawings and direction of Engineer-In-Charge. The joints system
will be of extruded aluminum base members, self aligning / self
centering arrangement and support plates etc. as per ASTM B221-02.
The system shall be such that it provides floor to floor /floor to wall
expansion control system for various vertical localtion in load

application areas that accommodates multi directional seismic

movement without stress to its components. System shall consist of
metal profiles with a universal

102

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

Code No.

Description

Unit

Rate `

aluminum base member designed to accommodate various project

conditions and finish floor treatments. The cover plate shall be designed
of width and thickness required to satisfy projects movement and
loading requirements and secured to base members by utilizing
manufacturers pre-engineered self-centering arrangement that freely
rotates / moves in all directions. The Self centering arrangement shall
exhibit circular sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to allow freedom of
movement and flexure in all directions including vertical displacement.
Provision of Moisture Barrier Membrane in the Joint System to have
watertight joint is mandatory requirement all as per the manufactures
design and as approved by Engineer -in- Charge . (Material shall
confirm to ASTM 6063.)
5.44.1

Floor Joint of 100 mm

gap 5.44.2
5.44.3
gap
5.45

Floor Joint of 150

6,358.55 metre

mm gap

6,982.85

Floor Joint of 200 mm

metre

7,491.00

Providing and fixing of expansion joint system related with wall joint
(internal/ external) location as per drawings and direction of EngineerIn- Charge. The joints shall be of extruded aluminum base members,
self aligning / centering arrangement and support plates as per ASTM
B221- 02. The material shall be such that it provides an Expansion
Joints System suitable for vertical wall to wall/ wall to corner application,
both new and existing construction in office Buildings & complexes with
no slipping down tendency amongst the components of the Joint
System. The Joint System shall utilize light weight aluminum profiles
exhibiting minimal exposed aluminum surfaces mechanically snap
locking the multicellular to facilitate movement. (Material shall confirm to
ASTM 6063.)
5.45.1

Wall Joint of 100 mm

gap 5.45.2
5.45.3
gap
5.46

metre

metre

Wall Joint of 150

5,080.90 metre

mm gap

5,472.90

Wall Joint of 200 mm

Providing and fixing of expansion joint system of approved make and

manufactures for various roof locations as per approved drawings and
direction of Engineer-In-Charge. The joints shall be of extruded
aluminum base members with, self aligning and self centering
arragement support plates asper ASTM B221-02. The system shall be
such that it provides watertight roof to roof/roof to corner joint cover
expansion control system that is capable of accommodating
multidirectional seismic movement without stress to its components.
System shall consist of metal profile that incorporates a universal
aluminum base member designed to accommodate various project
conditions and roof treatments. The cover plate shall be designed of
width and thickness required to satisfy movement and loading
requirements and secured to base members by utilizing
manufacturers pre-engineered self-centering arrangement that freely
rotates / moves in all directions. The Self centering arrangement shall
exhibit circular sphere ends that lock and slide inside the corresponding

metre

5864.90

aluminum extrusion cavity to allow freedom of movement and flexure in

all directions including vertical displacement. The Joint System shall
resists damage or deterioration from the impact of falling ice, exposure
to UV, airborne contaminants and occasional foot traffic from
maintenance personnel. Provision of Moisture Barrier Membrane in the
Joint System to
SUB HEAD : 5 - REINFORCED CEMENT CONRETE

103

Code No.

Description

Unit

Rate `

have water tight joint is mandatory requirement. Material shall confirm to

ASTM 6063.
5.46.1

Roof Joint of 100 mm

gap 5.46.2
5.46.3
gap
5.47

Roof Joint of 150

6358.55 metre

mm gap

6,750.55

Roof Joint of 200 mm

metre

7026.40

Providing and fixing in position factory made precast RCC M-40 doors
and windows frames having excellent smooth finish as per IS: 6523
with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S
stirrups placed @ 200 mm C/C and 6 numbers high strength polymer
blocks of required size for fixing hinges including providing 6 no
specially designed M.S. galvanised sleeves for accomodating 6 mm dia
fully threaded bolts for fixing hold fast on vertical members, providing
suitable arrangement for recieving sliding door bolts and tower bolt etc
all complete, as per the direction of Engineer in charge. (The cost of
hold fast and cc block of 1:3:6 mix is also included in the item.) The
frame shall be measured in running meter correct to two places of
decimal.
5.47.1
mm 5.47.2
5.47.3

5.48

metre

Door frame 125 mmx 60

metre

Door frame 100 mmx

445.95 metre

60 mm

409.25

Door frame 85 mmx60 mm

metre

389.90

Providing and laying Reinforced cement concrete for construction of

piers, abutments, portal frames, pier caps and bearing pedestals and
seismic arresters over pier/ abutment caps at all locations with
specified grade using Ordinary Portland Cement (conforming to
strength requirement of IS:8112) including the cost of steel centering
and shuttering etc. complete including testing of materials etc. for
casting pier & pier cap in one/two stage, necessary tools, plants,
machinery and all related operations as required to complete the work
as per drawings and Specifications with all leads, lifts and depths true to
level and position but excluding the cost of providing reinforcement.
Reinforcement shall be measured and paid separately .
Note:- Cement content considered in this item is 480 Kg./ Cum. Excess/
less cement used as per design mix is payable/ recoverable separately.

5.49

5.48.1

Reinforced Cement Concrete -M-50

cum

6873.00

5.48.2

Reinforced Cement Concrete -M-60

cum

7985.60

5.48.3

Extra for using M -50/ M60 Grade Self-compacting Reinforced

Cement Concrete

cum

635.10

Constructing cast-in situ RCC diaphragm wall by providing and

laying machine batched, machine mixed, self compacting, ready mix
reinforced cement concrete, tramie controlled, of M 30 grade using
minimum 400 kg. cement per cum of concrete including providing and
mixing required admixtures in recommended proportions as per IS :
9103, as approved by the Engineer-in-charge, for achieving 150200mm slump, for diaphragm wall having thickness as per approved

structural design not exceeding 600 mm, in pannels of required depth

and lengths as per approved drawing, including constructing necessary
guide walls as required and as specified including boring in all kinds of
soils and rocks, including working in or

104

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

Code No.

Description

under water and / or liquid mud, in foul conditions and pumping or

bailing out of water and removing slush, including disposal of earth/
rock / slush etc. for all leads and all lifts, including preparing, providing
and re-circulating bentonite slurry in the trench as and when required for
all depths, including agitating bentonite slurry during trenching etc.,
providing and fixing stop ends or form tubes, upto the required depth of
diaphragm wall including extracting the same after casting, including
chipping off the bentonite adulterated concrete or unsound concrete up
to the cut off level for obtaining the sound concrete, dressing undulations
on the exposed face of diaphragm wall after excavation by chipping /
chiseling etc. including filling the depression/ cavities with sound
concrete etc. complete and as directed by the Engineer-in-charge,
including providing recess for bearing plates and fixing insert boxes for
inclined rock anchors etc. complete as per the specifications and
approved design and as directed by the Engineer-in-charge, but
excluding the cost of reinforcement and inserts. (rates include cost of all
inputs of labour, material and T & P, cost of handling, lifting & placing
in position the reinforcement cage in the trench, including the
additional cost of welding the reinforcement bars etc. involved in the
work and all other incidental expenditure for completing the work as
directed by the Engineer-in-charge), However, the actual area of the
diaphragm wall, correct to two places of decimal, from design bottom
level to the design cut off level (including portion anchored in the rock
upto the design bottom level) only shall be measured for payment.
Excess/less cement used for design mix including the extra cement
required for
under water concreting is payable / recoverable separately.

Unit

Rate `

cum

13,966.75

SUB HEAD : 5 - REINFORCED CEMENT CONRETE

105

106

SUB-HEAD : 6.0

BRICK WORK

107

108

BASIC RATES (SH: 6.0 BRICK WORK)

Code
No.

0011
0037
0101
0112
0114
0115
0123
0124
0155*
0322
1002
1008
1034
1197
1225
1235
1984
1986
2201
2204
2205
2207
2208
2302

Nos

Description

day
Hire charges of Pump set of capacity 4000 litres/hour
Mobile crane
Bhisti
Carpenter 2nd class
Beldar
Coolie
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mason (average)
Bitumen felt :Type 3 grade 1
Mild steel round bar 12 mm dia and below
Flats up to 10 mm in thickness
Bolts and nuts up to 300 mm in length
Second class kail wood in scantling 10
Mild steel flat strap fitting
Diesel oil
Common burnt clay F.P.S. bricks tile class designation 10
Common burnt clay modular bricks class designation 12.5
Carriage of bricks
Carriage of timber

day
day
day
day
day
day
day
sqm
quintal
quintal
quintal
cudm
quintal
litre
1000
Nos
1000
Nos
1000
Nos
cum

Carriage of brick tiles

tonne

Carriage of lime
Carriage of G.I.sheet and accessories
Common burnt clay F.P.S. (non modular) bricks class designation
7.5

7008

F.P.S. (non modular) clay fly ash bricks class designation 7.5

7736

Extruded burnt flyash clay sewer bricks conforming to I.S 4885

7737

Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894

7738

Calcium Silicate Bricks machine moulded conforming to I.S. 4139

7900

Modular common burnt clay bricks of class designation 7.5

7901

Machine moulded perforated common burnt clay FPS (non modular)

bricks of class designation 12.5
Machine moulded common burnt clay modular perforated bricks
of class designation 12.5

1000 Nos

day

Carriage of steel

2602

7902

Unit

1000
Nos
cum
tonne
1000
Nos
1000
Nos
1000
Nos
1000
Nos
1000
Nos
1000

1000 Nos

Rate `

399.00

5200.00

4600.00

417.00

5500.00

6100.00

600.00

70.00

283.96

5800.00

7000.00

4500.00

121.70

5700.00

363.00

4200.00

94.65

4850.00

399.00

5600.00

170.38

329.00

260.00

106.49

329.00

5000.00

94.65

435.00

55.49

4500.00

SUB HEAD : 6 - BRICK WORK

4600.00
5350.00

109

Code
No.

7903
7904
8655
8656
8657
9999

Description

Unit

Rate `

Machine moulded common burnt clay FPS (non modular)

bricks of class designation 12.5

1000 Nos

5000.00

1000 Nos

5250.00

Autoclaved aerated cement (AAC) blocks

cum

3200.00

Gypsum panel 666 X 500 X 100 mm size

sqm

480.00

kg

55.00

L.S.

1.78

Machine moulded common burnt clay tile bricks of class desognation 12.5

Bonding plaster for Gypsum panel

Sundries

110

SUB HEAD : 6 - BRICK WORK

6.0 BRICK WORK

Code No.

Description

6.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.1
Cement mortar 1:4 (1 cement : 4 coarse sand)
6.1.2
Cement mortar 1:6 (1 cement : 6 coarse sand)

6.2

6.3

6.4

6.5

6.6

6.7

6.8
6.9

6.10

6.11

Brick work with common burnt clay modular bricks of class designation
7.5 in foundation and plinth in:
6.2.1
Cement mortar 1:4 (1 cement : 4 coarse sand)
6.2.2
Cement Mortar 1:6 (1 cement : 6 coarse sand).

Unit

Rate `

cum
4,918.65 cum
4,677.25

cum
4,753.45 cum
4,541.05

Brick work with common burnt clay machine moulded perforated bricks
of class designation 12.5 conforming to IS: 2222 in superstructure above
plinth level up to floor five level in cement mortar 1:6 (1 cement : 6
coarse sand) :
6.3.1
With F.P.S.(non modular) bricks
cum 6.3.2
With Modular bricks
cum
Brick work with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in superstructure above plinth level up to floor V
level in all shapes and sizes in :
6.4.1
Cement mortar 1:4 (1 cement : 4 coarse sand)
cum 6.4.2
Cement mortar 1:6 (1 cement : 6 coarse sand)
cum
Extra for brick work / AAC block masonry / Tile brick masonry in
superstructure above floor V level, for each four floors or part thereof by
mechanical means.
cum
Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls with
necessary weep and vent holes including use of cores and cost of
providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3
mm section at
not less than 3 ties per sqm as per approved design.
sqm
Providing half brick masonry with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3
coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in
cavity wall
complete with 10 cm / 11.4 cm wide bitumen felt type 3 grade 1.
metre
Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick
of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand)
in superstructure above plinth level and upto floor five level.
sqm
Brick work in plain arches in superstructure above plinth level and upto
floor five level including centering and shuttering complete for span up to
6 metres with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand).
cum
Brick work in gauged arches in superstructure above plinth level and upto
floor five level in cement mortar 1:3 (1 cement : 3 coarse sand) including
centering and shuttering complete, for span up to 6 meters with
common
burnt clay F.P.S. (non modular) bricks of class designation 7.5.
cum
Extra for additional cost of centering for arches exceeding 6m span including
all shuttering, bolting, wedging and removal (Area of the soffit to
be measured).
sqm

5483.55 5560.40

188.85
517.60

5667.55 5426.15
289.05

8546.20

10185.85
101.15
446.65

SUB HEAD : 6 - BRICK WORK

111

Code
No.

6.12

6.13

6.14
6.15

6.16

6.17

6.18

6.19
6.20

6.21

6.22

6.23

6.24

Description

HALF BRICK MASONRY

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in foundations and plinth in :
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse
sand)
6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up to floor
V level.
6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
Extra for half brick masonry in superstructure, above floor V level for
every four floors or part thereof by mechanical means.
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at
every third course of half brick masonry.
BRICK TILE WORK
Tile brick masonry with common burnt clay F.P.S. (non modular) tile
bricks of class designation 10 in foundation and plinth in:
6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
Tile brick masonry with common burnt clay machine moulded tile
bricks of class designation 12.5 conforming to IS : 2690 (Part I) in
foundation
and plinth in cement mortar 1:6 (1 cement : 6 coarse sand).
Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks
of class designation 10 in superstructure above plinth level up to floor V
level in cement mortar 1:6 (1 cement : 6 coarse sand).
Deleted
Tile brick masonry with common burnt clay F.P.S. (non modular) tile
bricks of class designation 10 in plain arch work in superstructure
above plinth and upto floor five level in cement mortar 1:4 (1 cement : 4
coarse sand)
including centering and shuttering complete.
Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks
of class designation 10 in gauged arch work in superstructure above plinth
and upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand)
including centering and shuttering complete.
Tile brick masonry work 5 cm thick with common burnt clay F.P.S.
(non modular) tile bricks of class designation 10 in cement mortar 1:3 (1
cement : 6 coarse sand) in superstructure above plinth and upto floor
five level. HONEY COMB WORK
Honey-comb brick work 10 / 11.4 cm thick with common burnt clay
bricks of class designation 7.5 in super structure above plinth level upto
floor V level with cement mortar 1:4 (1 cement : 4 coarse sand).
Extra for laying brick work in or under water and/or liquid mud including
cost of pumping or bailing out water and removing slush etc.
complete.
NOTE :- The quantity will be calculated by multiplying the depth
measured from sub - soil water level up to the centre of gravity of brick
work under sub - water with the quantity of brick work in cum executed

Unit

Rate `

sqm
sqm

611.80
584.75

sqm
sqm

692.80
665.80

sqm

25.60

sqm

69.50

cum
cum

8145.35
7759.10
7804.25

cum
8553.90
cum

11500.20
cum

und
er
the
sub
soil
wat
e
The
dep
th
of
cen
tre
of
gra

vity
sha
ll
be
rec
kon
ed
corr
ect
to
0.1
m.
0.0
5 m
or
mor

e shall be taken as 0.1 m and less than 0.05 m ignored.

112

cum

13085.45

sqm

550.10

sqm

433.80

cum/mtr
depth

426.15

SUB HEAD : 6 - BRICK WORK

Code
No.

6.25
6.26

Description

Unit

Rate `

Extra for laying brick work in or under foul position.

cum

172.20

EXPOSED BRICK WORK

Brick work with common burnt clay selected F.P.S. (non modular)
bricks of class designation 7.5 in exposed brick work including making
horizontal and vertical grooves 10 mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand)
6.26.1
6.26.2

6.27

6.28

6.29

6.30

6.31

From ground level upto plinth level

Above plinth level upto floor V level

cum
7772.20 cum
5559.35

Brick work with common burnt clay modular bricks of class

designation 7.5 in exposed brick work including making horizontal and
vertical grooves 10mm wide 12 mm deep complete in cement mortar
1:6 (1 cement : 6 coarse sand).
6.27.1

From ground level upto plinth level

cum

4569.25

6.27.2

Above plinth level upto floor V level

cum

5318.15

Brick work with common burnt clay machine moulded modular bricks
of class designation 12.5 in exposed brick work including making
horizontal and vertical grooves 10 mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand).
6.28.1

From ground level upto plinth level

cum

4936.90

6.28.2

Above plinth level upto floor V level

cum

5685.85

Brick work with common burnt clay machine moulded F.P.S. (non
modular) bricks of class designation 12.5 in exposed brick work
including making horizontal and vertical grooves 10 mm wide 12 mm
deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).
6.29.1

From ground level upto plinth level

cum

4992.35

6.29.2

Above plinth level upto floor V level

cum

5712.20

Brick work with common burnt clay machine moulded perforated

F.P.S. (non modular) bricks of class designation 12.5 conforming IS :
2222 in exposed brick work including making horizontal and vertical
grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1
cement : 6 coarse sand).
6.30.1

From ground level upto plinth level

cum

4,762.85

6.30.2

Above plinth level upto floor V level

cum

5,511.75

Brick work with common burnt clay machine moulded perforated

modular bricks of class designation 12.5 conforming to IS : 2222 in
exposed brick work including making horizontal and vertical grooves 10
mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6
coarse sand).

4,852.05

6.31.1

From ground level upto plinth level

cum 6.31.2

Above plinth level upto floor V level

5601.00

cum
6.32

Brick work with clay flyash F.P.S. (non modular) brick of class
designation 7.5 in superstructure above plinth level up to floor five level
in :
6.32.1
6.32.2

6.33

Deleted

Cement mortar 1:4 (1

cement : 4 coarse sand)

Cement mortar 1:6

(1 cement : 6

coarse sand)

SUB HEAD : 6 - BRICK WORK

cum
cum

5,697.25
5,455.85

113

Code
No.

Description

Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in super structure
above plinth level up to floor V level in :
6.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse
sand)
6.35
Brick work with modular calcium silicate bricks machine moulded
conforming to IS:4139, class designation 10 average compressive
strength in super structure above plinth level up to floor V level in :
6.35.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.35.2 Cement mortar 1:6 (1 cement : 6 Coarse
sand)
6.36
Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in foundation and plinth :
6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand)
6.37
Brick work with modular extruded brunt fly ash clay sewer
bricks (conforming to IS : 4885) in arches in foundation and plinth in cement
mortar 1:3 ( 1 cement : 3 fine sand).
6.38
Providing and laying autoclaved aerated cement blocks masonry with 100
mm thick AAC blocks in super structure above plinth level up to floor V
level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate
includes providing and placing in position 2 Nos 6 mm dia M.S. bars at
every third
course of masonry work.

Unit

Rate `

cum
cum

6218.60
6006.20

cum
cum

6162.05
5949.60

cum

5460.50

6.34

6.39 Deleted
6.40
Providing and laying Gypsum panel partitions 100 mm thick with water
proof Gypsum panels of size 666x500x100 mm, made of calcite
phosphor Gypsum fixed with tongue and groove, jointed with bonding
plaster as per manufacturers specifications in superstructure above
plinth level up to floor V level. Gypsum blocks will have a minimum
compressive strength
of 9.3 kg/cm2
6.41
Extra for Gypsum panel Partitions in superstructure above floor V level
for every four floors or part thereof.
6.42
Deleted
6.43
Deleted
6.44
Brick edging 7cm wide 11.4 cm deep to plinth protection with
common burnt clay F.P.S. (non modular) bricks of class designation 7.5
including
grouting with cement mortar 1:4 (1 cement : 4 fine sand).
6.45
Half brick masonry with non modular fly ash bricks of class designation
10, conforming to IS : 12894, in super structure above plinth and upto
floor V level.
6.45.1 Cement mortar 1 : 3 (1 cement : 3 coarse
6.45.2 sand)
6.46
Deleted Cement mortar 1 : 4 (1 cement : 4 coarse
sand)

8515.35
cum

6386.95
cum

sqm

783.50

sqm

66.10

metre

38.15

sqm
sqm

778.15
751.10

114

SUB HEAD : 6 - BRICK WORK

SUB-HEAD : 7.0

STONE WORK

115

116

BASIC RATES (SH: 7.0 STONE

WORK)

Code
No.

Description

0011

Hire charges of Pump set of capacity 4000 litres/hour

0100

Bandhani

0101

Bhisti

0102

Blacksmith 1 st class

0103

Blacksmith 2nd class

0112

Carpenter 2nd class

0114

Beldar

0115

Coolie

0116

Fitter (grade 1)

0123

Mason (brick layer) 1 st class

0124

Mason (brick layer) 2nd class

0125

Mason (for plain stone work) 2nd class

0126

Mason (for ornamental stone work) 1 st class

0139

Skilled Beldar (for floor rubbing etc.)

0367

Portland Cement

0373

Cramp Gun metal 25x6x300 mm

0873

Copper pins 6 mm dia 7.5 cm long

1002

Mild steel round bar 12 mm dia and below

1007

Structural steel such as tees, angles channels and R.S. joists

1034

Bolts and nuts up to 300 mm in length

1154

Through and bond stone

1157

Stone for masonry work

1160

Red sand stone block

1161

White sand stone block

1163

White sand stone slab 75 mm thick (un-dressed)

1164

Red sand stone slab 40 mm thick (un-dressed)

1165

White sand stone slab 40 mm thick (un-dressed)

1169

Kota stone slab 25mm thick (rough chiseled)

1197

Second class kail wood in scantling

1215

Welding by electric plant

1225

Mild steel flat strap fitting

Unit

Rate `

day

600.00

day

363.00

day

363.00

day

435.00

day

399.00

day

399.00

day

329.00

day

329.00

day

435.00

day

435.00

day

399.00

day

399.00

day

435.00

day

363.00

tonne

6300.00

each

80.00

each

11.00

quintal

4500.00

quintal

4636.00

quintal

5600.00

100 Nos

1300.00

cum

900.00

10 cudm

65.00

10 cudm

70.00

sqm

350.00

sqm

180.00

sqm

200.00

sqm

290.00

10 cudm

260.00

cm
quintal

2.00
5000.00

SUB HEAD : 7- STONE WORK

117

Code
No.

1237
2204
2215
2216
2302
2750
4009
7339
7439
8683
8684
8698
9999

Description

Cutting marble or sand stone slab up to 50 mm thick by mechanical

device

Unit

Rate `

metre

10.00

Carriage of timber

cum

121.70

Carriage of Soling stone & masonry stone

cum

125.28

Carriage of stone blocks white & red sand stone & kota stone slab

tonne

94.65

Carriage of G.I.sheet and accessories

tonne

94.65

8 mm thick granite stone tiles (mirror polished of all shades)

sqm

700.00

Mild steel tubes hot finished welded type

kilogram

55.00

Stainless steel cramp

kilogram

340.00

8mm thick (mirror polished tiles machine cut edge) Raj Nagar white

sqm

500.00

Red sand stone gang saw cut 30 mm thick

sqm

460.00

White sand stone gang saw cut 30 mm thick

sqm

480.00

Stainless steel cramps (weight 260 grams) with nuts, bolts and
washer for dry stone cladding

each

90.00

Sundries

L.S.

1.78

118

SUB HEAD : 7- STONE WORK

BASIC RATES (SH: 7.0 STONE WORK

Code No.

Description

Unit

Rate `

cum

3,918.10

cum

4,664.85

cum
cum

371.95
1137.20

RANDOM RUBBLE MASONRY

7.1

7.2

7.3
7.4

7.5

7.6
7.6.1
7.7

7.8

7.9
7.10

7.11

7.12

Random rubble masonry with hard stone in foundation and plinth

including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse
sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level
with :
7.1.1
Cement mortar 1:6 (1 cement : 6 coarse sand)
Random rubble masonry with hard stone in superstructure above plinth
level and upto floor five level, including leveling up with cement concrete
1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm
nominal size) at window sills, ceiling level and the like.
7.2.1
Cement mortar 1:6 (1 cement : 6 coarse sand)
Deleted
Extra for random rubble masonry with hard stone in :
7.4.1
Square or rectangular
pillars
7.4.2
Circular pillars
Extra for random rubble masonry with hard stone curved on plan for a
mean radius not exceeding 6 m.
COURSED RUBBLE MASONRY
Coursed rubble masonry (first sort) with hard stone in foundation and
plinth with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
Coursed rubble masonry (second sort) with hard stone in foundation &
plinth with :
7.7.1
Cement mortar 1:6 (1 cement : 6 coarse sand)
Coursed rubble masonry with hard stone (first or second sort) in
superstructure above plinth level and upto floor five level.
7.8.1
Masonry work (first sort) , in cement mortar 1:6 (1 cement : 6
coarse sand)
7.8.2
Masonry work (second sort) , in cement mortar 1:6 (1 cement:
6 coarse sand)
Deleted
Extra for coursed rubble masonry with hard stone (first or second sort) in:
7.10.1 Square or rectangular
pillars
7.10.2 Circular pillars
Extra for coursed rubble masonry with hard stone (first or second sort)
curved on plan for a mean radius not exceeding 6 m.
ASHLAR MASONRY
Stone work in plain ashlar in super structure upto floor five level in
cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment matching the stone shade :

446.75
cum

4,527.55
cum

cum

4229.70

5263.60
cum
4,965.75
cum

cum
cum

413.70
1288.75

cum

486.45

SUB HEAD : 7- STONE WORK

119

Code No.

Description

7.12.1

Rate `

One face dressed

7.12.1.1 Red sand stone

cum

27848.00

7.12.1.2 White sand stone

cum

28621.00

7.12.2.1 Red sand stone

cum

36606.0

7.12.2.2 White sand stone

cum

7.12.2

7.13

Unit

Both face dressed

Stone work plain ashlar in arches in super structure upto floor V level in
cement mortar 1:3 (1 cement : 3 coarse sand) including centring,
shuttering and pointing with white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment matching the stone shade.
7.13.1 One face dressed

37380.0
0

7.13.1.1 Red sand stone

cum

7.13.1.2 White sand stone

cum
32310.00
33084.00

7.13.2

7.14

Both face dressed

7.13.2.1 Red sand stone

cum

41069.0

7.13.2.2 White sand stone

cum

Stone work plain ashlar in domes , in super structure upto floor V level
in cement mortar 1:3 (1 cement : 3 coarse sand) including centring,
shuttering and pointing with white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment matching the stone shade.
7.14.1 One face dressed

41842.0
0

7.14.1.1 Red sand stone

cum

7.14.1.2 White sand stone

cum
49340.00
50112.00

7.14.2

7.15

Both face dressed

7.14.2.1 Red sand stone

cum

71069.0

7.14.2.2 White sand stone

cum

0
71843.0

Stone work ashlar punched (ordinary) in superstructure upto floor five

level in cement mortar 1:6 (1 white cement : 6 coarse sand) including
pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade.
7.15.1 One face dressed

7.15.1.1 Red sand stone

cum

7.15.1.2 White sand stone

cum
26504.00
27278.00

7.15.2

Both faced punched

7.15.2.1 Red sand stone

7.15.2.2 White sand stone
7.16

Extra for stone work, random rubble / coursed rubble masonry /

ashlar masonry above floor V level for every four floors or part
thereof.

7.17
Extra for
plain ashlar or ashlar
punched in :

cum
7.17.1
7.18

34692.00

Square or rectangular pillars

cum

765.00

cum

1855.00

cum

1290.00

Extra for stone work; plain ashlar or ashlar punched curved on plan with
a mean radius not exceeding 6 m.

120

33918.00 cum

SUB HEAD : 7- STONE WORK

Code
No.

Description

Unit

Rate `

Extra for additional cost of centering for arches exceeding 6m span

including all strutting, bolting, wedging etc. and removal (area of soffit to
be measured).

sqm

446.65

Stone work ashlar sunk or moulded or sunk and moulded upto floor five
level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing
with white cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade :
7.20.1 Red sand stone

cum

38923.00

7.20.2

cum

39697.00

Extra for stone work ashlar sunk or moulded or sunk and moulded or
carved in :
7.21.1 Triangular or Square or rectangular pillars

cum

2420.00

7.21.2

Circular or polygonal pillars

cum

6854.00

7.22
cornices.

Extra for stone work ashlar sunk or moulded in

per metre

7.23

Stone work (machine cut edges) for wall lining etc. (veneer work) upto
10 metre height, backing filled with a grout of average 12 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment matching the stone shade : (To be secured to the backing and
the sides by means of cramps and pins which shall be paid for
separately) :
7.23.1 Red sand stone - exposed face fine dressed with rough backing.

7.19

SUNK, MOULDED, CARVED ASHLAR MASONRY

7.20

7.21

White sand stone

23.05

per cm girth
MISCELLANEOUS STONE WORK

2588.2

7.23.1.1 70 mm thick

sqm

7.23.1.2 60 mm thick

sqm

7.23.1.3 50 mm thick

sqm

7.23.1.4 40 mm thick

sqm

7.23.1.5 30 mm thick

sqm

0
2484.1
5
2380.3
5
2276.1
0
2172.00

7.23.2

Red sand stone - Exposed face machine cut and table

rubbed with rough backing.

7.23.2.1 70 mm thick

sqm

3452.85

7.23.2.2 60 mm thick

sqm

3348.80

7.23.2.3 50 mm thick

sqm

3245.00

7.23.2.4 40 mm thick

sqm

3140.75

7.23.2.5 30 mm thick

sqm

3036.60

7.23.3

White sand stone - exposed face fine dressed with rough

backing .

7.23.3.1 70 mm thick

7.23.3.4 40

7.23.3.2 60 mm thick

mm thick

7.23.3.3 50 mm thick

7.23.3.5 30
mm thick

sqm

2642.40

sqm

2530.60

sqm

SUB HEAD : 7- STONE WORK

2419.05
sqm

2306.80

sqm

2195.20

121

Code No.

Description

7.23.4

7.24
7.25

7.26

7.27

7.28

Unit

Rate `

White sand stone - Exposed face machine cut and table rubbed
with rough backing.

7.23.4.1 70 mm thick

sqm

3507.0

7.23.4.2 60 mm thick

sqm

7.23.4.3 50 mm thick

sqm

3395.2

7.23.4.4 40 mm thick

sqm

7.23.4.5 30 mm thick

sqm

3283.7

Extra for stone work (veneer work) curved on plan with a mean radius not
exceeding 6 m.

cum

Providing and fixing stainless steel cramps of required size and shape
for anchoring stone wall lining to the backing or securing adjacent
stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse
sand), including making the necessary chases in stone and holes in
walls wherever
required.

kg

Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge

shape as per design in cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases.

each

Providing and fixing copper pins 7.5 cm long 6 mm diameter for

securing adjacent stones in stone wall lining in cement mortar 1:2 (1
cement : 2
coarse sand), including making the necessary chases.

5
3059.8
5
1855.00

574.65
each
36.75

Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm

wide beyond the wall as measured along the slope in cement mortar 1:4
(1 cement : 4 coarse sand) with 12 mm diameter anchoring steel bar, 45
cm long, fixed in each stone and supported on and including with bricks
cove in cement mortar 1:4 (1 cement : 4 coarse sand), including
pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade :
7.28.1 Red sand stone :
7.28.1.1 With common burnt clay F.P.S.(non modular) bricks of class
designation 7.5

3171.4

31.75

sqm

1297.40
7.28.2

7.29

White sand stone :

7.28.2.1 With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

sqm

Providing and fixing horizontal chajja of stone 40 mm thick and upto 80

cm projection in cement mortar 1:4 (1 cement : 4 coarse sand),
including pointing in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the stone shade :
7.29.1 Red sand stone

sqm

7.29.2

sqm

White sand stone

7.30
30 mm red sand stone sun-shade (chisel-dressed) supported on red
sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse
sand), including finishing complete.

1329.35

797.60

sqm

825.45

Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and
moulded including providing and fixing with 4 Nos gun metal cramp
25x6
mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design.

979.95
each
2905.35

122

SUB HEAD : 7- STONE WORK

Code
No.

7.32

7.33

7.34

Description

Unit

Stone work, plain in copings, cornices, string courses and plinth

courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse
sand), including pointing with white cement mortar 1:2 (1 white cement :
2 stone dust) with an admixture of pigment matching the stone shade.
7.32.1 Red sand stone

cum

38249.00

7.32.2

cum

39022.00

Providing and fixing stone jali 40 mm thick throughout in cement mortar

1:3 (1 cement : 3 coarse sand), including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment,
matching the stone shade, jali slab without any chamfers etc.
7.33.1 Red sand stone

sqm

9522.70

7.33.2

sqm

9548.25

cum/ mtr
depth

426.10

White sand stone

White sand stone

Extra for laying stone work in or under water and/or liquid mud
including cost of pumping or bailing out water and removing slush etc.
complete.
NOTE :- The quantity will be calculated by multiplying the depth
measured from sub - soil water level up to the centre of gravity of stone
work under sub - water with the quantity of stone work in cum executed
under the sub - soil water. The depth of centre of gravity shall be
reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and
less than 0.05 m ignored.

7.35

Extra for laying stone work in or under foul position.

7.36

Wall lining butch work upto 10m height with Dholpur stone 40 mm thick
rough facing on the exposed surface with stone strips of minimum
length 300 mm and required width, including embedding every tenth
layer and bottom most layer in masonry or concrete after making
necessary chases of size 75x75 mm and by providing layer of 75 mm
thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3
coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment to match the shade of stone
complete as per direction of Engineer-in-charge.

7.37

7.38

7.39

Stone work (machine cut edges Veneer work) for wall lining upto 10 m
height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1
Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement
: 2 stone dust), including rubbing and polishing complete.
(To be secured to the backing and the sides by means of cramps and
pins which shall be paid for separately).
7.37.1 Kota stone slabs exposed face dressed and rubbed.
7.37.1.1 25 mm thick
Stone tile work for wall lining upto 10 m height with special adhesive over
12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand),
including pointing in white cement with an admixture of pigment to
match the stone shade.
7.38.1 8mm thick (mirror polished and machine cut edge)
7.38.1.1 Granite stone of any colour and shade
7.38.1.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra
black marble
Extra for stone work for wall lining on extrior walls of height more than10 m
from ground level for every additional height of 3 m or part there of.

Rate `

172.20
cum

1529.60
sqm

sqm

1679.10

sqm

1725.00

sqm

1486.90

sqm

83.35

SUB HEAD : 7- STONE WORK

123

Code
No.

7.40

7.41

7.42

Description

Unit

Rate `

STONE WORK IN DRY CLADDING

Providing and fixing dry cladding upto 10 metre heights with 30 mm
thick gang saw cut stone with (machine cut edges) of uniform colour
and size upto 1mx1m, fixed to structural steel frame work and/ or with
the help of cramps, pins etc. and sealing the joints with approved
weather sealant as per Architectural drawing and direction of Engineerin-charge.
(The steel frame work, stainless steel cramps and pins etc. shall be paid
for separately).
7.40.1 Red sand stone

sqm

2486.30

7.40.2

sqm

2520.00

White sand stone

Providing and fixing structural steel frame (for dry cladding with 30 mm
thick gang saw cut with machine cut edges sand stone) on walls at all
heights using M.S. square/ rectangular tube in the required pattern as
per architectural drawing, including cost of cutting, bending, welding etc.
The frame work shall be fixed to the wall with the help of M.S. brackets/
lugs of angle iron/ flats etc. which shall be welded to the frame and
embedded in brick wall with cement concrete block 1:2:4 (1 cement :2
coarse sand :4 graded stone aggregate 20 mm nominal size) of size
300x230x300 mm, including cost of necessary centring and shuttering
and with approved expansion hold fasteners on CC/RCC surface,
including drilling necessary holes. Approved cramps/ pins etc. shall be
welded to the frame work to support stone cladding, the steel work will
be given a priming coat of Zinc primer as approved by Engineerincharge and painted with two or more coats of epoxy paint (Shop
drawings shall be submitted by the contractor to the Engineer-in-charge
for approval before execution). The frame work shall be fixed in true
horizontal & vertical lines/planes. (Only structural steel frame work
shall be measured for the purpose of payment, stainless
steel cramps shall be paid for separately and nothing extra shall be paid). kg
Providing and fixing adjustable stainless steel cramps of approved quality,
required shape and size, adjustable with stainless steel nuts, bolts and
washer (total weight not less than 260 gms), for dry stone cladding fixed
on frame work at suitable location, including making necessary
recesses in stone slab, drilling required holes etc complete as per
direction of the
Engineer-in-charge.
each

143.55

206.15

124

SUB HEAD : 7- STONE WORK

SUB-HEAD : 8.0

MARBLE & GRANITE WORK

125

126

BASIC RATES (SH: 8.0 MARBLE & GRANITE WORK)

Code
No.

0013
0019
0100
0101
0102
011
4
011
5
011
6
0123
0126
0128
0139
0367
0368
0874
1034
1239
1240
2209
2216
2750
2751
7244
7245
7295
7297
7338
7339
7430
7431
7432
7452
7453
9999

Description

Unit

Rate `

Machine for rubbing of floors

day

350.00

Hand Grinder for mirror

polish Bandhani

day
day

250.00
363.00

Bhisti

day
day

363.00
435.00

day
day

329.00
329.00

Mason (brick layer) 1st class

day
day

435.00
435.00

Mason (for ornamental stone work) 1st class

Mate

day
day

435.00
363.00

Blacksmith 1st class

Beldar
Coolie
Fitter (grade 1)

Skilled Beldar (for floor rubbing

etc.) Portland Cement
White Cement
Black colour dark shade pigment
Bolts and nuts up to 300 mm in length
18 mm thick Flamed finish granite stone slab
18 mm thick Italian Marble stone slab, Perlato (slab area
up to 0.5 sqm).
Carriage of cement
Carriage of stone blocks white & red sand stone & kota stone slab
8 mm thick granite stone tiles (mirror polished of all shades)
8 mm thick marble tiles (polished) Raj Nagar
Table rubbed polished stone 18 mm thick (75x50cm) Agaria
Marble stone - 18 mm thick
Table rubbed polished stone 18mm thick (75x50cm) Granite
stone - 18 mm thick
Granite of any colour, 18 mm thick (slab area upto 0.50 sqm)
Granite of any colour, 18 mm thick (slab area above 0.50 sqm)
Gun metal cramp
Stainless steel cramp
Wedge expansion hold fastener 1/4" or 6 mm
Wedge expansion hold fastener 3/8" or 10 mm
Wedge expansion hold fastener 1/2" or 12 mm
Raj nagar plain white marble (table rubbed and polished) 18 mm
thick (slab area upto 0.50 sqm)
Raj nagar plain white marble (table rubbed and polished) 18 mm
thick (slab area more than 0.50 sqm)
Sundries

day
tonne

363.00
6300.00

tonne
kilogram

14000.0
0 55.00

quintal
sqm

5600.00
2000.00

sqm

3600.00

tonne
tonne

94.65
94.65

sqm
sqm

700.00
400.00

sqm

2000.00

sqm
sqm
sqm
kilogram
kilogram
each
each
each

2000.00
1900.00
2000.00
330.00
340.00
14.00
15.00
28.00

sqm

650.00

sqm

750.00

L.S.

1.78

SUB HEAD : 8- MARBLE & GRANITE WORK

127

Code
No.

8.1

Description

Unit

Rate `

Zebra black marble.

sqm

2782.65

8.1.1.1

Area of slab upto 0.50 sqm

sqm

2914.25

8.1.1.2

Area of slab over 0.50 sqm

Marble work gang saw cut (polished and machine cut) of thickness 18
mm for wall lining (veneer work), backing filled with a grout of average
12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including
pointing with white cement mortar 1:2 (1 white cement : 2 marble
dust) with an admixture of pigment to match the marble shade (To be
secured to the backing by means of cramps, which shall be paid for
separately).
8.1.1

8.2

Raj Nagar Plain white marble/ Udaipur green marble/

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills , facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete
at all levels.
8.2.1

Raj Nagar Plain white marble/ Udaipur green marble/

Zebra black marble

8.2.1.1

Area of slab upto 0.50 sqm

2341.55 sqm

8.2.1.2

Area of slab over 0.50 sqm

2463.55

8.2.2

Granite of any colour and

8.2.2.1

shade Area of slab upto 0.50

sqm

3866.00

8.2.2.2

sqm

sqm

3907.40

sqm

Area of slab over 0.50 sqm

8.3

8.4

8.5

8.6
8.7

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss
finish etc. complete as per design approved by Engineer-in-Charge.
8.3.1

Marble work

metre

136.10

8.3.2
work

Granite

metre

230.55

Extra for fixing marble /granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
based
adhesive, including cleaning etc. complete.

metre

247.40

Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in
marble/ Granite/stone work, including necessary holes for pillar taps
etc. including
moulding, rubbing and polishing of cut edges etc. complete.

each

386.60

Mirror polishing on marble work/Granite work/stone work where ever

required to give high gloss finish complete.

sqm

212.85

Providing and fixing cramps of required size & shape in RCC/ CC / Brick

masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand),

including drilling necessary hole in stones and embedding the cramp in
the hole (fastener to be paid separately).

128

8.7.1

Gunmetal cramps

kg

546.90

8.7.2

Stainless steel cramps

kg

574.65

SUB HEAD : 8- MARBLE & GRANITE WORK

Code
No.

8.8

Description

Unit

Rate `

each

26.85

each

28.35

each

43.80

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick

masonry surface backing including drilling necessary holes and the cost
of bolt etc complete.
8.8.1

Wedge expansion type

8.8.1.1

Fastener with threaded dia 6 mm

8.8.1.2

Fastener with threaded dia 10

mm

8.8.1.3

Fastener with threaded dia 12

mm
8.9

Stone tile (polished) work for wall lining over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm
including pointing in white cement complete.
8.9.1

8mm thick

8.9.1.1

Raj nagar plain white marble/ Udaipur green marble/ Zebra

8.9.1.2
8.10

8.11

8.12

1564.70

black marble

sqm

Granite of any colour and shade

sqm

1921.85

Providing and fixing stone slab with table rubbed, edges rounded
and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal
partitions by cutting a chase of appropriate width with chase cutter and
embedding the stone in the chase with epoxy grout or with cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6
mm nominal size) as per direction of Engineer-in-charge and finished
smooth.
8.10.1

White Agaria Marble Stone

sqm

3263.50

8.10.2

Granite Stone of approved shade

sqm

3263.50

sqm

7022.60

Providing and fixing machine cut, mirror / eggshell polished , Marble

stone work for wall lining (veneer work) including dado, skirting, risers of
steps etc., in required design and pattern wherever required, stones of
different finished surface texture, on 12 mm (average) thick cement
mortar 1:3 (1 cement : 3 oarse sand) laid and jointed with white cement
slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed
with pigment of matching shade, including rubbing, curing, polishing etc.
all complete as per Architectural drawings, and as directed by the
Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato,
Rosso verona, Fire Red
or Dark Emperadore etc.
Providing and laying flamed finish Granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of the
building all complete as per the architectural drawings with 18 mm thick
stone slab over 20 mm (average) thick base of cement mortar 1:4 (1
cement : 4 coarse sand) laid and jointed with cement slurry and pointing
with white cement slurry admixed with pigment of matching shade
including rubbing, curing and polishing etc. all complete as specified and
as directed by the Engineer-in-Charge :
a.

Flamed finish granite stone slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

SUB HEAD : 8- MARBLE & GRANITE WORK

sqm

3244.35

129

130

SUB HEAD : 9.0

WOOD & PVC WORK

131

132

BASIC RATES (SH: 9.0 WOOD & PVC WORK)

Code
No.

Description

Unit

Rate `

Bandhani

day

363.00

Blacksmith 1st class

day

435.00

Blacksmith 2nd class

day

399.00

Carpenter 1st class

day

435.00

Carpenter 2nd class

day

399.00

Beldar

day

329.00

Glazier

day

399.00

Mason (brick layer) 1st class

day

435.00

Mason (brick layer) 2nd class

day

399.00

Mistry

day

435.00

Painter

day

399.00

Carpenter (average)

day

417.00

Multi purpose fibre (high impact poly propelene reinforced) cement board
8 mm thick

sqm

260.00

Bamboo 25 mm dia 2.5 metre long

score

350.00

0341

Flat pressed 3 layer particle board (medium density) Grade 1,

12 mm thick

sqm

330.00

0346

Extra for veneered particle board with Teak veneering on one

side and commercial veneering on other side

sqm

270.00

Extra for veneered particle board with Commercial veneering on both sides sqm

180.00

Extra for veneered particle board with Teak veneering both sides

500.00

0100
0102
0103
0111
0112
0114
0119
0123
0124
0130
0131
0156*
0237
0305

0347
0348

sqm

0378

Brass butt hinges (light/ordinary type) : 125x70x4 mm

10 Nos

0379

Brass butt hinges (light/ordinary type) : 100x70x4 mm

860.00 10 Nos

0380

Brass butt hinges (light/ordinary type) : 75x40x2.5 mm

720.00 10 Nos

0381

Brass butt hinges (light/ordinary type) : 50x40x2.5 mm

450.00 10 Nos

0382

Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70

200.00 10 Nos

kg) 0383

Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56

3300.00 10 Nos

kg) 0384

Brass butt hinges (heavy type) :75x65x4.0 mm(0.20 kg)

2800.00 10 Nos

0385

Brass parliamentary hinges 150x125x27x5 mm

1000.00 10 Nos

0386

Brass parliamentary hinges 125x125x27x5 mm

2950.00 10 Nos

0387

Brass parliamentary hinges 100x125x27x5 mm

2600.00 10 Nos

0388

Brass parliamentary hinges 75x100x20x3.2 mm

2400.00 10 Nos

0400

Brass tower bolt (barrel type) 250x10 mm

1800.00 each

0401

Brass tower bolt (barrel type) 200x10 mm

240.00 each

0402

Brass tower bolt (barrel type) 150x10 mm

190.00 each

0403

Brass tower bolt (barrel type) 100x10 mm

150.00 each

0408

Brass handles 125 mm with plate 175x32 mm

100.00 each

0409

Brass handles 100 mm with plate 150x32 mm

150.00 each

0410

Brass handles 75 mm with plate 125x32 mm

140.00 each

0411

Brass door latch 300x16x5 mm (0.380 kg)

110.00
each

180.00

SUB HEAD : 9 - WOOD & PVC WORK

133

Code
No.

Description

Unit

Rate `

Brass door latch 250x16x5 mm (0.350 kg)

each

170.00

Brass mortice latch and lock 100x65 mm with 6 levers and a pair
of brass lever handles

each

390.00

Brass mortice latch 100x65mm with a pair of brass lever

each

330.00

handles Brass casement window fastener

each

0424

Brass casement stays (straight peg type) 300 mm weighing not

less than 0.33 kg

60.00

0425

Brass casement stays (straight peg type) 250 mm weighing not

less than 0.28 kg

each

145.00

0426

Brass casement stays (straight peg type) 200 mm weighing not

less than 0.24 kg

each

120.00

0412
0413
0414
0423

0431
0432
0433
0438
0447
0449
0450
0451
0452
0453
0555
0556
0557
0558
0568

Brass hasps and staples (safety type) 150 mm

each

110.00

Brass hasps and staples (safety type) 115 mm

10 Nos

800.00

Brass hasps and staples (safety type) 90 mm

10 Nos

670.00

Brass night latch

10 Nos

570.00

Brass cupboard knob or wardrobe knob 50

each

500.00

mm Brass screws 50 mm

each

100 Nos

Brass screws 30 mm

220.00 100 Nos

Brass screws 25 mm

170.00 100 Nos

Brass screws 20 mm

140.00 100 Nos

Chromium plated Brass handles 125 mm with plate 175 x32 mm

100.00 100 Nos

Chromium plated Brass handles 100 mm with plate 150 x 32 mm

95.00 each

Chromium plated Brass handles 75mm with plate 125x32 mm

200.00 each

Chromium plated Brass mortice latch and lock 100x65 mm with

6 levers and a pair of brass lever handles

175.00 each

Chromium plated Brass casement stays (straight peg type) 300

mm weighing not less than 0.33 kg

0570

Chromium plated Brass casement stays (straight peg type) 250

mm weighing not less than 0.28 kg

0571

Chromium plated Brass casement stays (straight peg type) 200

mm weighing not less than 0.24 kg

0584
0585
0586
0587
0588
0589
0590
0591
0592

150.00

Chromium plated brass casement window fastener

0569

0583

35.00

Brass screws 40 mm

each

600.00

each

100.00

each

170.00

each

140.00

Chromium plated Brass Wardrobe Knob 50 mm

each

125.00

Chromium plated Brass screws 50 mm

each

550.00

Chromium plated Brass screws 40 mm

each

50.00

Chromium plated Brass Night latch

Chromium plated Brass screws 30 mm

100 Nos

Chromium plated Brass screws 25 mm

250.00 100 Nos

Chromium plated Brass screws 20 mm

220.00 100 Nos

Chromium plated Brass curtain rod 12 mm dia 1.25mm

160.00 100 Nos

thick Chromium plated Brass curtain rod 20 mm dia

125.00 100 Nos

1.25mm thick

100.00 metre

Chromium plated Brass curtain rod 25 mm dia 1.25mm thick

200.00 metre
260.00

metre

134

370.00
SUB HEAD : 9 - WOOD & PVC WORK

Code No.

Description

Unit

Rate `

0594

Bright finished or black enameled mild steel butt hinges 125x65x 2.12 mm 10 Nos

0595

Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm 10 Nos

145.00

90.00 0596 Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm

10 Nos

65.00 0597 Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm

10 Nos

65.00
0608

Nickel plated bright finished mild steel piano hinges 1 mm thick

25 mm wide

metre

42.00

0635

Bright finished or black enameled mild steel screws 50 mm

100 Nos

68.00

0637

Bright finished or black enameled mild steel screws 40 mm

100 Nos

52.00

0638

Bright finished or black enameled mild steel screws 30 mm

100 Nos

42.00

0639

Bright finished or black enameled mild steel screws 25 mm

100 Nos

38.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 Nos

32.00

0641

Bright finished or black enameled mild steel bolts and nuts 50x 6 mm

8.00 0642

Oxidised mild steel butt hinges 125x65x2.12 mm

10 Nos

150.00 0643
butt hinges 100x58x1.90 mm

each

Oxidised mild steel

10 Nos

95.00

Oxidised mild steel butt hinges 75x47x1.70 mm

10 Nos

0645

Oxidised mild steel butt hinges 50x37x1.50 mm

10 Nos

0646

Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm

350.00 0647

0644
70.00
60.00
10 Nos

Oxidised mild steel

parliamentary hinges 125x125x27x2.8 mm

10 Nos

325.00 0648

Oxidised mild steel

parliamentary hinges 100x125x27x2.8 mm

10 Nos

240.00 0649

Oxidised mild steel

parliamentary hinges 75x100x20x2.24 mm

10 Nos

220.00 0650

Oxidised mild steel

single acting spring hinges 150 mm

each

120.00 0651

Oxidised mild steel

single acting spring hinges 125 mm

each

110.00 0652

Oxidised mild steel

single acting spring hinges 100 mm

each

90.00

Oxidised mild steel double acting spring hinges 150 mm

115.00 0654

each
Oxidised mild steel

double acting spring hinges 125 mm

each

double acting spring hinges 100 mm

each

120.00 0655

Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

0660

0653

Oxidised mild steel

95.00
metre

Oxidised mild steel sliding door bolt 300x16 mm

0656
50.00
each

100.00 0661Oxidised mild steel sliding door bolt 250x16 mm

each

95.00

0662

Oxidised mild steel door latch 300x20x6 mm

each

50.00

0663

Oxidised mild steel door latch 250x20x6 mm

each

42.00

0664

Oxidised mild steel tower bolt (barrel type) 250x10 mm

each

48.00

0665

Oxidised mild steel tower bolt (barrel type) 200x10 mm

each

42.00

0666

Oxidised mild steel tower bolt (barrel type) 150x10 mm

each

32.00

0667

Oxidised mild steel tower bolt (barrel type) 100x10 mm

each

27.00

0668

Oxidised mild steel handles 125 mm

each

20.00

0669

Oxidised mild steel handles 100 mm

each

18.00

0670

Oxidised mild steel handles 75 mm

each

0679

Oxidised mild steel hasps and staples (safety type) 150 mm

16.00
10 Nos

130.00 0680

Oxidised mild steel

hasps and staples (safety type) 115 mm

10 Nos

hasps and staples (safety type) 90 mm

10 Nos

SUB HEAD : 9 - WOOD & PVC WORK

110.00 0681

Oxidised mild steel

80.00

135

Code
No.

0682
0683
0684
0685
0686
0687
0688
0689
0690
0691
0692
0693

Description

Unit

Rate `

Oxidised mild steel screws 50 mm

100 Nos

80.00

Oxidised mild steel screws 40 mm

100 Nos

65.00

Oxidised mild steel screws 30 mm

100 Nos

50.00

Oxidised mild steel screws 25 mm

100 Nos

50.00

Oxidised mild steel screws 20 mm

100 Nos

38.00

Anodised Aluminium butt hinges 125x75x4 mm

10 Nos

590.00

Anodised Aluminium butt hinges 125x63x4 mm

10 Nos

540.00

Anodised Aluminium butt hinges 100x75x4 mm

10 Nos

530.00

Anodised Aluminium butt hinges 100x63x3.2 mm

10 Nos

520.00

Anodised Aluminium butt hinges 100x63x4 mm

10 Nos

520.00

Anodised Aluminium butt hinges 75x63x4 mm

10 Nos

510.00

Anodised Aluminium butt hinges 75x63x3.2 mm

10 Nos

490.00

Anodised Aluminium butt hinges 75x45x3.2 mm

10 Nos

400.00

Anodised Aluminium sliding door bolt 300x16 mm

each

170.00

Anodised Aluminium sliding door bolt 250x16 mm

each

135.00

Anodised Aluminium tower bolt (barrel type) 300x10

10 Nos

775.00

mm Anodised Aluminium tower bolt (barrel type)

10 Nos

495.00

200x10 mm Anodised Aluminium tower bolt (barrel

10 Nos

395.00

type) 150x10 mm Anodised Aluminium tower bolt

10 Nos

315.00

(barrel type) 100x10 mm

10 Nos

520.00

Anodised Aluminium handles 125 mm with plate 175 x 32

10 Nos

395.00

mm Anodised Aluminium handles 100 mm with plate 150 x 32

10 Nos

335.00

each

135.00

mm

sqm

1800.00

0714

Block board construction flush door with teak wood ply on both
faces 35 mm thick

sqm

1600.00

0715

Block board construction flush door with teak wood ply on both
faces 30 mm thick

sqm

1500.00

0717

Block board construction flush door with teak wood ply on both
faces 25 mm thick

sqm

1200.00

0718

Block board construction flush door with commercial ply on

both faces 35 mm thick

sqm

1050.00

0719

Block board construction flush door with commercial ply on

both faces 30 mm thick

sqm

960.00

0752

Block board construction flush door with commercial ply on

both faces 25 mm thick

sqm of door
area

315.00

Block board construction flush door lipping

sqm of door
area

120.00

Square vision panel in Block board construction flush door

sqm of door
area

195.00

Circular vision panel in Block board construction flush door

sqm of door
area

325.00

0694
0696
0697
0698
0700
0701
0702
0703
0704
0705
0706
0713

0753
0754
0755

mm Anodised Aluminium handles 75mm with plate 125 x 32

mm Anodised Aluminium kicking plate 50 cm long 100x3.15

Decorative type louvers in Block board construction flush door

136

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

0757
0759
0763
0834
0869
1003
1008
1015
1021
1022
118
9
119
0
119
9
1200
1211
1231
1238

2465

Description

2466

i
Rebate
cutting in
l
block board
constructio d
n flush door
s
D
t
e

r
a

w
o

2204
2205

v
4

2406
2407
2412
2413
2414
2449
2451
2452
2453
2454
2455
2456
2459
2464

m
G
l
u
e
Synthetic
enamel
paint in all
shades
except
black or
chocolate
shade
Plaster of
Paris

2
m
m
d
i
a
F
l
a
t
s
u

d metal 20x60 mm strands Hard drawn steel

wire fabric

t
o

Galvanised steel bolts & nuts 6 mm dia and 25 mm long

round head with slots

Unit

Rate `

sqm of door
area

90.00

sqm

430.00

Second class teak wood in scantling

Kg

70.00

Second class teak wood in planks

litre

160.00

Sal wood in scantling

Kg

4.50

Kiln seasoned selected sheesham wood planks

quintal

4400.00

G.I. plain washer for seam bolts

quintal

4200.00

Extra for selected planks of second class teakwood

sqm

300.00

Extra for selected planks of first class teakwood

sqm

440.00

10 Nos

25.00

Carriage of timber

Carriage of steel

10 cudm

660.00

Float glass sheet of nominal thickness 4 mm (weight not less

than 10 kg/sqm)

10 cudm

750.00

Float glass sheet of nominal thickness 5.5 mm (weight not less

than 13.50 kg/sqm)

10 cudm

530.00

10 cudm

650.00

Ply wood 5 ply with commercial ply on both faces 6 mm thick

100 Nos

30.00

12 mm commercial ply

10 cudm

150.00

18 mm thick block board with commercial ply veneering on both side

10 cudm

150.00

cum

121.70

tonne

94.65

sqm

345.00

65 mm size Brass cupboard lock 6 levers of approved

sqm

520.00

quality, 75 mm size Brass hanging type door stopper 150

sqm

450.00

mm

sqm

700.00

Hydraulic door closer bottle type M.S. body with necessary

accessories and screws complete

sqm

850.00

Anodised Aluminium hanging type door stopper

each

55.00

Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x

42 mm with screws, bolts, nuts and washers complete

each

70.00

each

80.00

Anodised Aluminium Casement stay 250 mm

each

85.00

Hollock wood in scantling

each

100.00

each

70.00

each

600.00

each

28.00

each

55.00

each

55.00

10 cudm

340.00

h
i
c
k
n
e
s
s
M
i
l
d
s
t
e

Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x

42 mm with screws, bolts, nuts and washers complete
Brass cupboard lock 6 levers of approved quality, 40 mm
size Brass cupboard lock 6 levers of approved quality, 50
mm size Brass cupboard lock 6 levers of approved quality,

e
x

SUB HEAD : 9 - WOOD & PVC WORK

137

Code
No.

Description

Unit

Rate `

Nickled Chromium Brass cupboard lock 40 mm size

each

70.00

Nickled Chromium Brass cupboard lock 50 mm size

each

80.00

Nickled Chromium Brass cupboard lock 65 mm size

each

90.00

Nickled Chromium Brass cupboard lock 75 mm size

each

115.00

Ply wood 5 ply with teak ply on both faces 9 mm thick

sqm

1050.00

2481

Ply wood 5 ply with teak ply on one face and commercial ply on another
face 9 mm thick

sqm

850.00

2483

Ply wood 7 ply with teak ply on one face and commercial ply on another
face 9 mm thick

sqm

950.00

2484

Pre-laminated with decorative lamination on both side exterior Grade - I

MDF Board 12 mm thick confirming to IS:14587

sqm

700.00

2485

Pre-laminated with decorative lamination on both side exterior Grade - I

MDF Board 18 mm thick confirming to IS:14587

sqm

750.00

sqm

1220.00

sqm

650.00

2468
2469
2470
2471
2480

2486

2487

Pre-laminnated with decorative lamination one side and other side balancing
lamination exterior Grade - I MDF Board 25 mm thick confirming to
IS:14587
Pre-laminated with decorative lamination one side and other side
balancing lamination exterior Grade I MDF Board 12 mm thick
confirming to IS:14587

2488

Pre-laminated with decorative lamination one side and other side

balancing lamination exterior Grade I MDF Board 18 mm thick
confirming to

875.00

IS:14587

sqm

2489

PVC edge bending tape 2.00 mm thick

metre

2500

Extra for selected planks of second class deodar wood

2504

cudm Kiln seasoning of timber

2505

Hollock wood in planks

7001

Brass 100mm mortice latch and lock with 6 levers without pair of handles

each

280.00

7003

Pair of Anodised Aluminium lever handles for 100 mm mortice latch and
lock

each

340.00

roll

135.00

7018

Joint tape roll

7019

Dash fastener / Chemical fastner

10
cum
10 cudm

30.00
110.00
750.00
390.00

each

15.00 7021 Primer ( for gypsum board)

litre

73.00 7023 Chromium plated brackets ( curtain rods)

each

7.00
7029

Galvanised wire mesh of average width of aperture 1.4 mm and nominal

dia of wire 0.63 mm

sqm

260.00

7032

Frosted glass sheet of nominal thickness 4 mm (weighing not less than

10 kg/sqm)

sqm

350.00

7033

Nickel plated M.S. pipe 25 mm dia

metre

90.00

7034

Nickel plated M.S. pipe 20 mm dia

metre

80.00

7035

Nickel plated M.S. Brackets for curtain rod 20 mm

each

8.00 7036

Nickel plated M.S - Brackets for curtain rod 25 mm

each

8.00 7040

Oxidised mild steel screws 35 mm

7042

Mild steel conduit pipe (heavy type) ISI marked-20 mm dia

100 Nos

50.00

metre

60.00

138

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

7043
7048
7049
7055
7056
7059
7060
7063
7064
7065
7137

7139

7143

7151

7154

7155

7157
7184
7269
7271
7272
7307

Description

Unit

Mild steel conduit pipe (heavy type) ISI marked-25 mm dia

metre Rawl plug 50 mm (designation 10 nos)
each Teak wood lipping of size 25x3 mm in pelmets
metre
Flat pressed 3 layer and graded particle board (medium density) Grade
1 conforming to IS : 3087 - 18 mm thick
sqm
Aluminium tee channel (heavy duty) with rollers and stop end
metre Aluminium hanging floor door stopper with twin rubber & stopper
each Hydraulic door closer tubular type Aluminium section body
each
Oxidised M.S.casement stay (straight peg type) 300 mm not less than
0.33 kg
each
Oxidised M.S.casement stay (straight peg type) 250 mm not less than
0.28 kg
each
Oxidised M.S. casement stay (straight peg type) 200 mm not less than
0.24 kg
each
Factory made 35 mm thick shutters with laminated veneer lumber styles
& rails as per TADS 15:1995 and panels of 12 mm thick plain type-I,
medium density flat pressed three layer, graded particle board (FPT-I)
as per IS:3087
bonded with BWP type synthetic resin adhesive, as per IS:848
sqm
Factory made 35 mm thick shutters with laminated veneer lumber styles
& rails as per TADS 15:1995 and panels of 12 mm thick both
sides prelaminated type-I, medium density flat pressed three layer,
graded particle board (FPT-I) as per IS:3087 bonded with BWP type
synthetic resin
adhesive, as per IS:848
sqm
Factory made 35 mm thick shutters with laminated veneer lumber styles
& rails as per TADS 15:1995 and panels of 12 mm thick one side
prelaminated type-I, and other side balancing lamination, medium
density flat pressed three layer, graded particle board (FPT - I) as per
IS:3087 bonded with
BWP type synthetic resin adhesive, as per IS:848
sqm
Factory made 30 mm thick shutters with laminated veneer lumber styles
& rails as per TADS 15:1995 and panels of sheet glass using 10 kg/
sqm
glass panes
sqm
Factory made 35 mm thick shutters with laminated veneer lumber styles
& rails as per TADS 15:1995 and panels of galvanised wire gauge with
average
width of aperture 1.4 mm in both directions with wire of dia 0.63 mm
sqm
Factory made 30 mm thick shutters with laminated veneer lumber styles
&rails as per TADS 15:1995 and panels of galvanised wire gauge with
average width of aperture 1.4 mm in both directions with wire of dia
0.63 mm
sqm
Laminated veneer lumber confirming to TADS 15:1995 manufactured in
factory in frames of doors, windows
10 cudm
Oxidised M.S. safety chain (weighing not less than 450 gms) for door
each

25 mm thick
particle
board
sqm IInd
class teak
wood lipping
25 mm wide
x 12 mm
thick
metre 25 mm
thick
melamine
faced
prelaminated
three layer
particle
board
sqm
For flush door
shutters Extra
for providing
teak
veneering on
one side
instead of
commercial
veneering
sqm

Rate `

7
0
.
0
0
1
0
.
0
0
2
4
.
0
0

440.00 52.00 68.00 850.00

25.00

2000.00

1700.00

22.00
20.00

1700.00

1850.00

1500.00

2050.00

SUB HEAD : 9 - WOOD & PVC WORK

730.00
60.00
480.00
40.00
940.00
340.00

139

Code
No.

7312
7313
7314
7315
7349
7366
7367
7369
7388
7443
7444
7445
7449
7451
7468
7477

7478

7479

7480

7486

Description

Unit

Expandable fastener with plastic sleeve and M.S. screws : 25 mm long

each

Expandable fastener with plastic sleeve and M.S. screws : 32 mm long

each

Expandable fastener with plastic sleeve and M.S. screws : 40 mm long

each

Expandable fastener with plastic sleeve and M.S. screws : 50 mm long

each

12 mm M.S. U beading

metre

Glass reinforced Gypsum ( GRG) board 12.5 mm thick

sqm

Galvanised M.S. sheet 0.5 mm thick pressed channel section of size

50x32 mm

metre

Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm

metre

Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt

each Aluminium single cleat of size 30x32x3 mm
each Aluminium grip strip of size 50x12x2 mm
each 25 mm thick prelaminated flush door shutter both side decorative
sqm Aluminium U beading
Kg Glass sheet (Pin headed) 4 mm thick
sqm
Veneered particle board with commercial veneering on both sides 12 mm
thick

sqm

Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick

sqm

Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 18 mm thick

sqm

Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 25 mm thick

sqm

Pre/aminated particle board with both sides decorative lamination, flat

pressed 3 layer & graded (medium density) Grade I, Type II conforming
to IS : 12823 (exterior grade) 12 mm thick sqm 780.00 7485 Oxidised
M.
S. hinges finished with nickel plating 50 mm (Over all width)

metre

7512

Oxidised M.S. hinges finished with nickel plating 65 mm (Over all width)

7513

metre PTMT handle 125x34x24 mm

7514

each PTMT handle 150x34x24 mm

7515

each PTMT butt hinges 75x60x10 mm

7516

each PTMT butt hinges 100x75x10 mm

7517

each PTMT Tower bolt 152x42x18 mm

7518

each PTMT Tower bolt 202x42x18 mm

7552

each PTMT door catcher 72x42 mm

7553

each Coir veneered board 4 mm thick

7555

sqm Coir veneered board 6 mm thick

7556

sqm Coir veneered board 12 mm thick

8001

sqm Coir veneered board 18 mm thick

sqm

24 mm thick
Factory made
shutters with
style, rails and
panels of PVC
extruded
sections in
white, grey or
wooden finish
sqm

0 15.00 15.00 250.00

Rate `

55.00

70.00 80.00 50.00 15.00 12.00 850.00 220.00 320.00

0
.
0

510.00

35.00
40.00
50.00
65.00

0
1

790.00

750.00

70.00

90.00

35.00

860.00

400.00

0
1
4
.
0

140

300.00

930.00

700.00
1050.0
0
2200.00
SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

8002
8003
8004
8006
8010
801
1
801
4
8100
8210
8211
8212
8214
8215
8216
8217
8218
8219
8220
8221
8222
8223
8224
8225
8678
8699
8700
8703
8704
8705

Description

Unit

Rate `

30 mm thick Factory made shutters with style, rails and panels of PVC
extruded sections in white, grey or wooden finish

sqm

2300.00

Factory made PVC rigid foam panelled shutter i/c carriage

sqm

2200.00

Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage

sqm

2600.00

Factory made PVC rigid foam sheet 1 mm thick

sqm

200.00

48mmX40mmX1.5mm thick Factory made door frame of PVC extruded

sections in white, grey or wooden finish

metre

160.00

Factory made door frame PVC extruded sheet i/c carriage

metre

370.00

Factory made door frame of size 50x47 mm with wall thickness 5 mm

made of single piece extruded profile

metre

500.00

Powder coated M.S. butt hinges 100 mm X58 mmX1.9 mm

10

90.00

Nos Stainless steel screws 50 mm

260.00

100 Nos Stainless steel screws 40 mm

208.00

100 Nos Stainless steel screws 30 mm

192.00

100 Nos Stainless steel screws 20 mm

151.00

100 Nos Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked

670.00

10 Nos Stainless steel butt hinges 100x58x1.9 mm IS: 12817 marked

510.00

10 Nos Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked

275.00

10 Nos Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked

190.00

10 Nos
Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :
12817 marked
Stainless steel butt hinges (heavyweight) 100x60x2.5 mm IS :
12817 marked

910.00
10 Nos
690.00
10 Nos
460.00

Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :

12817 marked

10 Nos

350.00

M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked.

10 Nos

200.00

M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked

10 Nos

100.00

M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked

10 Nos

90.00

M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked

10 Nos

48.00

metre

250.00

8 mm thick tapered edge calcium silicate board

sqm

400.00

10 mm thick calcium silicate board

sqm

150.00

1 mm thick 35 mm wide bright finished stainless steel piano hinges

Telescopic drawer channels 300 mm long

Stainless steel roller for sliding arrangement in racks/ cupboards/
cabinets shutter

set
9.00
each
150.00

50 mmX42 mmX2 mm thick Factory made door frame of PVC extruded

sections in white, grey or wooden finish

metre

25 mm thick factory made PVC flush door shutter i/c carriage

sqm

2200.00

8706
8707

Factory made glass reinforced plastic door frame 90 x 45 mm i/c carriage metre

8708

30 mm thick factory made glass fiber reinforced plastic panel door

shutter i/c carriage

8709

30 mm thick factory made solid PVC profile panelled door single piece

sqm

ex
tr
u
d
e

d profile decorative finish (wood grain printed on both side)

sqm

390.00
1900.00
2700.00

SUB HEAD : 9 - WOOD & PVC WORK

141

Code
No.

8710
8711
8712
8713
8714
8715
8716
8717
8719
8720
8721
8722
8723
8724
8725
8726
8727
8730
8734

Description

Unit

Factory made solid PVC door frame 62 x 32 mm i/c carriage

metre 28 mm factory made solid PVC panel door shutter i/c carriage
sqm
30 mm thick factory made solid PVC profile panelled door single piece
extruded profile non decorative finish
sqm
Fiber glass reinforced plastic chajja
sqm
Magnetic
catcher
triple
strip
vertical
type
each
Magnetic
catcher
double
strip
horizontal
type
each 100 mm mortice lock with 6 levers for aluminium door
each 12.5 mm thick Glass fibre reinforced Gypsum board
sqm
2nd class teak wood lipping / moulded beading or Taj beading of size
18 X 5 mm
metre
Ceiling sections 0.55 mm thick having a knurled web of 51.55 mm and
two flanges of 26 mm each with lips of 10.55 mm
Perimeter channel having one flange of 20 mm and another flange of
30 mm with thickness of 0.55 mm and web of length 27 mm
Nylon sleeves & wooden screws (40 mm)
Counter sunk ribbed head screw 25 mm
Nos 12 mm thick marine plywood conforming to IS: 710
sqm 12 mm thick fire retardant plywood conforming to IS: 5509
sqm 1.5 mm thick decorative laminated sheet
sqm 1.0 mm thick decorative laminated sheet
sqm
30 mm thick factory made glass fiber reinforced plastic flush door
shutter i/c carriage

metre
metre
each
100

sqm

8737

P.V.C. Single piece extruded door frame of profile size 50mm x47mm
with wall thickness of 5 mm
35 mm thick factory made solid panel PVC door shutter of single with
extruded profile non decorative finished (Matt finished)
35 mm thick factory made solid panel PVC door shutter of single
piece extruded profile decorative finished (wood grain finished)

8738

Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50 mm

dia wire

sqm

8739

Factory made door frame fire rated ( 60 minutes) made with 16 SWG
G.I. Sheet of section 143 mm x 57 mm duly filled with vermuculite
based concrete mix

metre

8735
8736

8740
8741
8742
8743
8744
8745

metre
sqm
sqm

Fire rated door shuttere made with 16 SWG G.I. sheet( 60 minutes)
without panel
sqm
Fire seal Putty
kg
Clear fire resistant glass panes 6mm thick (60 minutes)
sqm
G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/ m2) with
ceramic tape of suitable thickness and fire resistant primer coating
metre
Matrix Mineral Board
metre Panic Bar / latch (Double point)
each
65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded

section in
white,grey or
wooden finish
metre

Rate `

2150.00 3800.00 20.00 15.00 340.00 195.00

3
0
0

35.00

.
0

44.00

0
2
3
0
0
.
0

1050.00

27.00 2.00 80.00 850.00 880.00 500.00 380.00

2200.00

840.00

5300.00
750.00
21500.0
0

2150.00

280.00
65.00
5200.00

2600.00

340.00

360.00

142

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

Description

Unit

Rate `

8746

37 mm thick Factory made shutter with style,rails and panels pf PVC

extruded section in white or grey finish i/c carriage

sqm

2400.00

8747

75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC

extruded section in white,grey or wooden finish

metre

380.00

8748

37 mm thick Factory made fusion welded shutter with style,

rails and panels of PVC extruded section in wooden finish

sqm

2600.00

8750

Zinc alloy (white powder coated) casement handle for uPVC

windows

each

180.00

Zinc alloy (white powder coated) Touch Lock for uPVC windows

each

120.00

Zinc alloy rollers for uPVC windows

each

55.00

Zinc alloy rollers for uPVC door

each

90.00

Zinc alloy (white powder coated) casement lock for uPVC windows

each

110.00

8755

Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm

for uPVC windows

each

250.00

8756

Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm

for uPVC windows

each

300.00

8757

Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm

for uPVC windows

each

380.00

for uPVC windows

each

440.00

Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm

for uPVC windows

each

550.00

uPVC extruded profile casement window Frame (50 mm x 50 mm)

metre

175.00

8761

uPVC extruded profile casement window sash (Style and

Rail) (62 mm x 34 mm)

metre

160.00

8762

uPVC extruded profile casement window mullion (intermediate

section) (66 mm x 50 mm)

metre

195.00

length in between two shutters) (24 mm x 34.5 mm)

metre

54.00

uPVC extruded profile casement window glazing bead (12 mm x 18 mm)

metre

54.00

uPVC extruded profile casement window Frame ( 67 mm x 62 mm)

metre

245.00

75 mm)(Style,rail and intermediate section)

metre

275.00

uPVC extruded profile casement window glazing bead (35 mm x 18 mm)

metre

90.00

uPVC extruded profile Two Track Sliding frame (67 mm x 52 mm)

metre

258.00

uPVC extruded profile Sliding window Sash (60 mm x 44 mm)

metre

240.00

8751
8752
8753
8754

8758
8759
8760

8763
8764
8765
8766
8767
8768
8769
8770
8771
8772
8773
8775
9999

Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm

uPVC extruded profile casement window T profile (one vertical

uPVC extruded profile casement Window Sash/Mullion ( 67 mm x

uPVC extruded profile Sliding Interlock for Window (one vertical

length in each shutter) (45.5 mm x 28 mm)

metre

53.00

uPVC extruded profile Sliding Door Sash (80 mm x 44 mm)

metre

300.00

Aluminium Track on bottom rail for uPVC window

metre

28.00

Wool Pine for uPVC window

metre

20.00

Steel Galvanised tubular reinforcement for uPVC door/ window

metre

60.00

Sundries

L.S.

1.78

SUB HEAD : 9 - WOOD & PVC WORK

143

9.0 WOOD & PVC WORK

Code No.

Description

Unit

Rate `

Note :- Wood work items may be substituted with available species

of wood as per direction of Engineer-in-charge for which rates
shall be derived from the relevant items.
FRAMES AND TRUSSES
9.1

9.2

9.3

9.4

9.5

9.6

Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately).
9.1.1

Second class teak wood

9.1.2

Sal wood

9.1.3
wood

Kiln seasoned and chemically treated hollock

Providing laminated veneer lumber conforming to IS:14616 and TAD

-15: 2001( Part B) in factory made frames of doors, windows, clerestory
windows and other frames, wrought framed and fixing in position with
hold fast lugs or with dash fasteners of required dia & length ( hold fast
lugs or dash fastener shall be paid for separately).

cum
91496.90 cum
75558.60
cum

53698.60

cum

97153.60

Providing wood work in frames of false ceiling, partitions etc. sawn and
fixed in position :
9.3.1

Sal wood

cum

70880.90

9.3.2
wood

Kiln seasoned and chemically treated hollock

cum

48848.40

Extra for additional labour for circular works, such as in frames of fan
light :
9.4.1

Second class teak wood

9.4.2

Sal wood

9.4.3
wood

Kiln seasoned and chemically treated hollock

Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, including ISI marked M.S. pressed
butt hinges bright finished of required size with necessary screws,
excluding panelling which will be paid for separately, all complete as per
direction of Engineer-in-charge.
9.5.1
Second class teak wood
9.5.1.1 35 mm thick shutters
9.5.1.2 30 mm thick shutters
9.5.2
Kiln seasoned and chemically treated hollock
9.5.2.1 wood 35 mm thick shutters
9.5.2.2 30 mm thick shutters
9.5.3
Kiln seasoned selected planks of sheesham wood
9.5.3.1 35 mm thick shutters
9.5.3.2 30 mm thick shutters
Providing and fixing 35 mm thick factory made laminated veneer lumber
door shutter conforming to IS : 14616 and TADS 15:2001 (Part B),

cum
9149.45 cum
7555.55
cum

5369.45

sqm
2689.05 sqm
2406.30
sqm
1731.05 sqm
1581.00
sqm
sqm

2435.40
2172.05

including ISI marked M.S. pressed butt hinges bright finished of required
size with necessary screws, all complete as per directions of
Engineerin-charge and panelling with panels of :

144

SUB HEAD : 9 - WOOD & PVC WORK

Code No.

Description

9.6.1

9.6.2

9.6.3

9.7

12 mm thick plain grade - 1, medium density flat pressed three

layer particle board FPT - I or graded wood particle board
FPTI, IS : 3087 marked, bonded with BWP type synthetic resin
adhesive as per IS : 848 :
12 mm thick pre-laminated particle board (decorative
lamination on both sides) grade - 1, medium density flat
pressed, three layer particle board FPT - I or graded wood
particle board FPTI, conforming to IS : 3087, bonded with
BWP type synthetic resin adhesive as per IS : 848 and prelaminated conforming to IS :
12823, Grade 1, Type - II marked :
12 mm thick one side Pre-laminated particle board
(decorative lamination on one side and other sides balancing
lamination) grade - 1 medium density flat pressed, three layer
particle board PT - I or graded wood particle board FPT-1
conforming to IS : 3087 bonded with BWP type synthetic resin
adhesive as per IS: 848 and pre-laminated conforming to IS :
12823, Grade -1,
Type II marked :

Providing and fixing panelling or panelling and glazing in panelled or

panelled and glazed shutters for doors, windows and clerestory
windows (Area of opening for panel inserts excluding portion inside
grooves or rebates to be measured). Panelling for panelled or panelled
and glazed shutters 25 mm to 40 mm thick :
9.7.1
9.7.7.1
9.7.7.2
9.7.2
9.7.3
9.7.3.1
9.7.3.2
9.7.4
9.7.4.1
9.7.5
9.7.5.1
9.7.5.2

9.7.5.3

9.7.5.4
9.7.6
9.7.6.1
9.7.7

Unit

Rate `

2453.00
sqm

2685.30
sqm

2627.25

sqm

Second class
teak wood
sqm
Kiln
seasoned and
chemically
treated hollock
wood
sqm Ply wood
5 ply, 9 mm
thick
Decorative
plywood both
side
decorative
veneer (Type I)
conforming to
IS 1328 BWR
type
sqm
Decorative
plywood one
side
decorative
veneer and

commercial veneer
on other face
(Type 1)
conforming to IS
1328 BWR Type
sqm
Ply wood 7 ply, 9
mm thick
Decorative
plywood one side
decorative veneer
and commercial
veneer on other
face (Type 1)
conforming to IS
1328 BWR Type
sqm
Particle Board 12
mm thick
Plain particle board
flat pressed, 3
layer or graded
wood particle
board medium
density Grade I, IS
: 3087 marked
sqm
Veneered flat

pressed three layer or graded wood particle board with

commercial veneering on both sides conforming to IS:3097,
grade I
sqm
Pre-laminated particle board with decorative lamination on one
side and balancing lamination on other side, Grade I, Type
II
IS: 12823 marked
sqm
Pre-laminated particle board with decorative lamination on both
sides, Grade I, Type II, IS:12823 marked
sqm
Coir Veneer Board (conforming to IS 14842)
12 mm thick
Float glass panes
4 mm thick glass pane
5.5 mm thick glass panes

SUB HEAD : 9 - WOOD & PVC WORK

sqm
sqm
sqm

2155.60
1383.50

1934.20
1652.60

1793.40

920.50

1188.00

1511.80
1568.15
1441.40
1181.70
1406.75

145

Code No.

Description

9.7.8

9.8
9.9

Fly proof stainless steel grade 304 wire gauge with 0.5 mm
dia. wire and 1.4 mm wide aperture with matching wood
beading

Deleted.
Providing and fixing glazed shutters for doors, windows and clerestory
windows using 4 mm thick float glass panes, including ISI marked M.S.
pressed butt hinges bright finished of required size with necessary
screws.
9.9.1
Second class teak wood
9.9.1.1 35 mm thick
9.9.1.2 30 mm thick
9.9.2
Kiln seasoned and chemically treated hollock wood
9.9.2.1 35 mm thick
9.9.2.2 30 mm thick
9.9.3
Kiln seasoned selected planks of sheesham wood
9.9.3.1 35 mm thick
9.9.3.2 30 mm thick

Providing and fixing factory made laminated veneer lumber glazed

shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4
mm thick float glass panes for doors, windows and clerestory windows,
including ISI marked M.S. pressed butt hinges bright finished of required
size with necessary screws, all as per directions of Engineer-in-charge.
9.10.1 30 mm thick shutters
9.11
Extra for providing heavy sheet float glass panes instead of ordinary
float glass in glazed doors, windows and clerestory window shutters.
(Area of opening for glass panes excluding portion inside rebate shall be
measured)
9.11.1 5.5 mm thick instead of 4 mm thick.
9.12
Extra for providing frosted glass panes 4 mm thick instead of
ordinary float glass panes 4 mm thick in doors, windows and
clerestory window shutters. (Area of opening for glass panes excluding
portion inside rebate
shall be measured).
9.13
Deduct for providing pin headed glass panes instead of ordinary
float glass panes weighing 4 mm thick in doors, windows and
clerestory windows shutters (Area of opening for glass panes excluding
portion inside
rebate shall be measured).
9.14
Extra for providing ISI marked Stainless Steel butt hinges instead of
M.S. pressed butt hinges bright finished of required size with necessary screws.
(Shutter area to be measured).

Unit

Rate `

sqm

1602.40

sqm
3262.90 sqm
2939.75
sqm
2172.25 sqm
2000.70
sqm
sqm

2974.40
2691.05

sqm

2278.80

sqm

203.25

sqm

5.80

sqm

29.05

sqm

253.50

sqm

303.25

sqm

49.75

9.10

9.15

Deduct for not providing hinges in doors, windows or clerestory window

shutters with :
9.15.1 Stainless steel butt hinges with stainless steel screws :
9.15.1.1 For 2nd class teak wood and other class of wood shutters
9.15.2
ISI marked M.S. pressed butt hinges bright finished of
required size
9.15.2.1 For 2nd class teak wood and other class of wood shutters

9.16

146

Providing and fixing 25 mm thick shutters for cup board etc. :

9.16.1 Panelled or panelled & glazed shutters :

SUB HEAD : 9 - WOOD & PVC WORK

Code No.

9.17

9.18

9.19
9.20

9.21

Description

9.16.1.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws
9.16.1.2 Second class teak wood including ISI marked nickel plated
bright finished M.S. piano hinges with necessary screws
9.16.2 Glazed shutters :
9.16.2.1 Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws
9.16.2.2 Second class teak wood including ISI marked nickel plated
bright finished M.S. piano hinges with necessary screws
Providing and fixing flat pressed 3 layer particle board medium
density exterior grade (Grade I) or graded wood particle board IS : 3087
marked, to frame, backing or studding with screws etc. complete
(Frames, backing or studding to be paid separately) :
9.17.1 12 mm thick
9.17.2 18 mm thick
Providing and fixing Pre-laminated flat pressed 3 layer (medium
density) particle board or graded wood particle board IS : 3087 marked,
with one side decorative and other side balancing lamination Grade I,
Type II exterior grade IS : 12823 marked, in shelves with screws and
fittings wherever required, edges to be painted with polyurethane primer
(fittings to be paid separately).
9.18.1 18 mm thick
9.18.2 25 mm thick
Deleted
Providing and fixing ISI marked flush door shutters conforming to IS
: 2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated
bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
Providing and fixing ISI marked flush door shutters conforming to IS
: 2202 (Part I) non-decorative type, core of block board construction
with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
9.21.2
30 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws
9.21.3 25 mm thick (for cupboard) including ISI marked nickel
plated bright finished M.S. piano hinges with necessary
screws

Unit

Rate `

sqm

2760.25

sqm

2799.60
2746.10

sqm
2720.85
sqm

sqm
sqm

528.60
664.55

sqm
sqm

1202.00
1290.55

2606.45
sqm
2374.15
sqm
2109.35
sqm

sqm

1909.55

SUB HEAD : 9 - WOOD & PVC WORK

sqm

1735.35

sqm

1482.15

147

Code
No.

Description

Extra for Providing and fixing flush doors with decorative veneering
instead of non decorative ISI marked flush door shutters conforming to
IS: 2202 (Part I)
9.22.1 On one side only
9.23
Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door
shutter to be measured).
9.24
Extra for providing vision panel not exceeding 0.1 sqm in all type of
flush doors (cost of glass excluded) (overall area of door shutter
to be measured):
9.24.1 Rectangular or square
9.24.2 Circular
9.25
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door
shutters (overall area of door shutters to be measured).
9.25.1 Decorative type door

Unit

Rate `

sqm

394.90

sqm

365.85

sqm
sqm

139.40
226.50

sqm

377.50

sqm

104.55

9.22

9.26
9.27

Extra for cutting rebate in flush door shutters (Total area of the shutter to
be measured).
Providing and fixing wire gauge shutters using galvanized M.S. wire
gauge of average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm, for doors, windows and clerestory windows with
hinges and necessary screws :
9.27.1
35 mm thick shutters
9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of
required size
9.27.1.1.1 Second class teak wood
9.27.1.1.2 Kiln seasoned and chemically treated hollock wood
9.27.1.1.3 Kiln seasoned selected class of sheesham wood
9.27.1.2
9.27.1.2.1
9.27.1.2.2
9.27.1.2.3

With ISI marked stainless steel butt hinges of required size

Second class teak wood
Kiln seasoned and chemically treated hollock wood
Kiln seasoned selected class of sheesham wood

sqm
3063.05 sqm
2097.35
sqm
2807.40
sqm
3316.55 sqm
2350.85
sqm
3060.90

9.27.2
9.27.2.1

30 mm thick shutters
with ISI marked M.S. pressed butt hinges bright finished of
required size
9.27.2.1.1 Second class teak wood
9.27.2.1.2 Kiln seasoned and chemically treated hollock wood

sqm
2709.25 sqm
1883.95

9.27.2.1.3 Kiln seasoned selected class of sheesham wood

sqm
9.27.2.2 With ISI marked stainless steel butt hinges of required size
9.27.2.2.1 Second class teak wood
9.27.2.2.2 Kiln seasoned and chemically treated hollock
wood 9.27.2.2.3 Kiln seasoned selected class of sheesham
wood
9.28
Deleted. 9.29
Deleted.

9.30

2490.40
Deleted.

sqm

148

2962.75 sqm

2137.30

sqm

2743.90

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

9.31

Description

9.32
Providing 50x50x50 mm 2nd class teak wood plugs including cutting
brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making
good the walls etc.
9.33
Providing and fixing expandable fasteners of specified size with
necessary plastic sleeves and galvanised M.S. screws including
drilling holes in masonry work /CC/ R.C.C. and making good etc.
complete.

9.35

9.36

9.37

9.38

Rate `

sqm
sqm

2278.80
2046.50

each

20.65

each
each
each
each

15.90
18.15
21.65
22.80

sqm
sqm
sqm
sqm

4933.95
3206.80
2593.45
1672.30

Providing and fixing wire gauge laminated veneer lumber shutters

conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using
galvanised wire gauge with average width of aperture 1.4 mm in both
directions with wire of dia 0.63 mm as per IS :1568, for doors, windows
and clerestory windows, including ISI marked M.S. pressed butt hinges
bright finished of required size with necessary screws, as per directions
of Engineer-in-charge:
9.31.1 35 mm thick shutters
9.31.2 30 mm thick shutters
MISCELLANEOUS - WOOD WORK

9.34

Unit

9.33.1 25 mm long
9.33.2 32 mm long
9.33.3 40 mm long
9.33.4 50 mm long
Providing and fixing 2nd class teak wood plain lining tongued and
grooved, including wooden plugs complete with necessary screws and
priming coat on unexposed surface.
9.34.1 40 mm thick
9.34.2 25 mm thick
9.34.3 20 mm thick
9.34.4 12 mm thick
Providing and fixing in wall lining flat pressed three layer (medium
density) particle board or graded wood Pre-laminated one side
decorative lamination and other side balancing lamination Grade I,
Type II, IS : 12823 marked, including priming coat on unexposed
surface, with necessary fixing arrangement and screws etc. complete :
9.35.1
12 mm thick
9.35.2
18 mm thick
9.35.3 25 mm thick
Providing and fixing specified wood frame work consisting of battens
50x25 mm fixed with rawl plug and drilling necessary holes for rawl
plug etc. including priming coat complete.
9.36.1 Kiln seasoned and chemically treated hollock wood
Providing and fixing plywood 4 mm thick, one side decorative veneer
conforming to IS: 1328 (type-1), for plain lining / cladding with
necessary screws, including priming coat on unexposed surface with :
9.37.1 Decorative veneer facings of approved manufacture
Providing and fixing 4mm thick coir veneer board, ISI marked IS :
14842, plain lining with necessary screws, priming coat on unexposed
surface
etc., complete.

sqm
1177.40 sqm
1317.95
sqm
1407.35

cum

96783.70

sqm

1156.20

sqm

975.00

SUB HEAD : 9 - WOOD & PVC WORK

149

Code
No.

9.39

9.40

9.41

9.42

9.43

9.44

9.45
9.46

Description

Providing and fixing skirting with Pre-laminated (one side decorative

and other side balancing lamination) flat pressed 3 layer or graded
particle board (medium density) Grade I, Type II, IS :12823 marked, with
necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. and priming coat on unexposed
surface complete :
9.39.1 18 mm thick
9.39.2 25 mm thick
Providing and fixing wooden moulded beading to door and window
frames with iron screws, plugs and priming coat on unexposed
surface etc. complete :
9.40.1 2nd class teak wood
9.40.1.1 50x12 mm
9.40.1.2 50 x 20 mm
9.40.2 Kiln seasoned and chemically treated hollock wood
9.40.2.1 50x12 mm
90.35 9.40.2.2 50x20 mm
Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm
apart (frames to be paid separately), including fixing 50x12 mm
beading complete with :
9.41.1 Second class teak wood
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed
3 layer or graded wood particle board medium density grade I, IS :
3087 marked, including top cover of 6 mm commercial ply wood
conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia
( heavy type) curtain rod with nickel plated brackets, including fixing
with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood
cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet
and rawl plugs 75 mm long
etc. all complete.
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir
veneer board ISI marked IS : 14842, including top cover of 6 mm coir
veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain
rod with nickel plated brackets, including fixing with 25x3 mm M.S.
Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm
x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm
long etc. all
complete.

Unit

Rate `

sqm
sqm

1509.55
1599.00

metre
metre

117.95
156.85
metre
metre
110.85

sqm

1793.60

metre

372.75

metre

478.25

metre
metre

33.45
92.90

metre

49.00

Extra for using veneered particle board conforming to IS 3097 Grade I,

in item of pelmet 18mm thick 150mm wide.
9.44.1 Non decorative veneer on both sides
9.44.2 Particle board with decorative veneering on both
sides
Providing and fixing teak wood lipping of size 25x3 mm in pelmet.
Providing and fixing curtain rods of 1.25 mm thick chromium plated
brass plate, with two chromium plated brass brackets fixed with C.P.
brass screws and wooden plugs, etc., wherever necessary complete :
9.46.1
12 mm dia
9.46.2
20 mm dia

9.46.3 25
mm dia

metre

271.30 metre
metre

150

341.00
468.75

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

9.47

Description

Unit

Rate `

Providing and fixing nickel plated M.S. pipe curtain rods with nickel
plated brackets :

9.47.1 20 mm dia (heavy type)

metre
126.60
9.47.2 25 mm dia (heavy type)
metre
138.20
9.48
Providing and fixing M.S. grills of required pattern in frames of
windows etc. with M.S. flats, square or round bars etc. including priming
coat with approved steel primer all complete.
9.48.1
Fixed to steel windows by welding
kg
109.00
9.48.2
Fixed to openings /wooden frames with rawl plugs screws etc.
kg
116.90
9.49
Providing and fixing expanded metal 20x60 mm strands 3.25 mm
wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd
949.25
class teak wood and priming coat with approved steel primer all complete. sqm
9.50
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of
weight not less than 7.75 Kg per sqm to window frames etc. including
62x19 mm beading of second class teak wood and priming coat with
1118.10
approved steel
primer all complete.
sqm
9.51
Providing and fixing fly proof galvanized M.S. wire gauge to windows
and clerestory windows using wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia 0.63 mm all
complete.
9.51.1

With 2nd class teak wood beading 62X19 mm

sqm

861.65

9.51.2

With 12 mm mild steel U beading

sqm

578.30

sqm

110.35

each

117.35

cum
cum

69087.40
46573.20

each
each
each
each

33.65
25.80
20.80
11.75

9.52
Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight
not less than 7.75 Kg per sqm in panelled and glazed door and window shutter
instead of glass sheet 4 mm thick.
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to
frame with 10 mm diameter bolts, nuts and wooden plugs and
embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement
: 3 coarse sand:
6 graded stone aggregate 20mm nominal size).
9.54
Providing beams including hoisting, fixing in position and applying wood
preservative for the unexposed surfaces, etc. complete with :
9.54.1 Sal wood
9.54.2 Hollock wood
BRIGHT FINISHED M.S. FITTINGS
9.55

9.56

Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. complete :
9.55.1 125x65x2.12 mm
9.55.2 100x58x1.90 mm
9.55.3 75x47x1.70 mm
9.55.4 50x37x1.50 mm
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt
hinges with necessary screws etc. complete :
9.56.1 125x90x4.00 mm
9.56.2 100x75x3.50 mm

9.56.3

75x60x3.10 mm
9.56.4 50x40x2.50 mm

SUB HEAD : 9 - WOOD & PVC WORK

each
each
each
each

57.45
38.55
24.85
15.85

151

Code
No.

9.57

9.58

9.59

9.60

9.61

9.62

9.63

9.64

Description

Note: - In coastal areas, M.S. heavy weight butt hinges or stainless

steel hinges shall be used.
COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS
PER IS: 1378)
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with
necessary screws etc. complete.
9.57.1 125x65x2.12 mm
9.57.2 100x58x1.90 mm
9.57.3 75x47x1.70 mm
9.57.4 50x37x1.50 mm
Providing and fixing ISI marked oxidised M.S. pressed Parliamentary
hinges with necessary screws etc. complete :
9.58.1 150x125x27x2.80 mm
9.58.2 125x125x27x2.80 mm
9.58.3 100x125x27x2.80 mm
9.58.4 75x100x20x2.24 mm
Providing and fixing ISI marked oxidised M.S. single acting spring
hinges with necessary screws etc. complete :
9.59.1
150 mm
9.59.2
125 mm
9.59.3 100 mm
Providing and fixing oxidised M.S. double acting spring hinges with
necessary screws etc. complete.
9.60.1
150 mm
9.60.2
125 mm
9.60.3 100 mm
Providing M.S. Piano hinges ISI marked IS : 3818 finished with
nickel plating and fixing with necessary screws etc., complete.
9.61.1 Overall width 35 mm
9.61.2 Overall width 50 mm
9.61.3 Overall width 65 mm
Providing and fixing ISI marked oxidised M.S. sliding door bolts with
nuts and screws etc. complete :
9.62.1 300x16 mm
9.62.2 250x16 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black
finish, (Barrel type) with necessary screws etc. complete :
9.63.1 250x10 mm
9.63.2 200x10 mm
9.63.3 150x10 mm
9.63.4 100x10 mm
Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt
lock conforming to IS : 7534 with necessary screws bolts, nut and
washers
etc. complete.

Unit

Rate `

each
each
each
each

35.55
27.55
21.90
12.65

each
each
each
each

59.10
56.20
46.30
41.45

each
each
each

173.55
161.95
137.30

each
each
each

167.75
173.55
143.15

metre

174.35

metre
metre

165.05
180.15

each
each

173.20
166.20

each
each
each
each

66.95
58.65
45.85
39.10

each

76.80

152

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

9.65

9.66

9.67

9.68

9.69

Description

Providing and fixing ISI marked oxidised M.S. door latches conforming
to IS:5930 with screws etc. complete :
9.65.1 300x20x6 mm
9.65.2 250x20x6 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to
IS:4992 with necessary screws etc. complete :
9.66.1
125
mm 9.66.2
100 mm
9.66.3 75 mm
Providing and fixing oxidised M.S. hasp and staple (safety type)
conforming to IS : 363 with necessary screws etc. complete :
9.67.1
150 mm
9.67.2
115 mm
9.67.3 90 mm
Providing and fixing oxidised M.S. casement stays (straight peg
type) with necessary screws etc. complete.
9.68.1
300 mm weighing not less than 200 gms
9.68.2
250 mm weighing not less than 150 gms
9.68.3 200 mm weighing not less than 120 gms
Providing and fixing oxidised M.S. Safety chain with necessary fixtures
for doors, (weighting not less than 450 gms)

Unit

Rate `

each
each

69.60
60.30

each
28.90 each
26.40
each
24.05

each
each
each

23.85
20.90
17.45

each
each
each

36.20
32.70
30.40

each

78.00

each
each
each
each

112.45
89.05
55.60
33.00

each
each
each

140.35
109.95
77.10

each
each
each
each
110.90

420.50
137.10
352.50

STAINLESS STEEL FITTINGS

9.70

9.71

9.72

Providing and fixing IS : 12817 marked stainless steel butt hinges

with stainless steel screws etc. complete :
9.70.1 125x64x1.90 mm
9.70.2 100X58X1.90 mm
9.70.3 75x47x1.80 mm
9.70.4 50x37x1.50 mm
Providing and fixing IS : 12817 marked stainless steel butt hinges
(heavy weight) with stainless steel screws etc. complete :
9.71.1
125x64x2.50 mm
9.71.2
100x60x2.50 mm
9.71.3 75x50x2.50 mm
BRASS FITTINGS
Providing and fixing bright finished brass butt hinges with necessary
screws etc. complete :
9.72.1 125x85x5.5 mm (heavy type)
9.72.2 125x70x4 mm (ordinary type)
9.72.3 100x85x5.5 mm (heavy type)
9.72.4 100x70x4 mm (ordinary type)
9.72.5 75x65x4 mm (heavy type)
9.72.6 75x40x2.5 mm (ordinary type)
9.72.7 50x40x2.5 mm (ordinary type)

each
each

each
137.35
73.50
32.05

SUB HEAD : 9 - WOOD & PVC WORK

153

Code
No.

Description

Providing and fixing bright finished brass parliamentary hinges with

necessary screws etc. complete :
9.73.1 150x125x27x5 mm
9.73.2 125x125x27x5 mm
9.73.3 100x125x27x5 mm
9.73.4 75x100x20x3.2 mm
Providing and fixing bright finished brass tower bolts (barrel type) with
9.74
necessary screws etc. complete :
9.74.1 250x10 mm
9.74.2 200x10 mm
9.74.3 150x10 mm
9.74.4 100x10 mm
9.75
Providing and fixing bright finished brass door latch with necessary
screws etc. complete :
9.75.1 300x16x5 mm
9.75.2 250x16x5 mm
9.76
Providing and fixing bright finished brass 100 mm mortice latch and
lock with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.
9.77
Providing and fixing bright finished brass 100 mm mortice latch with
one dead bolt and a pair of lever handles of approved quality with necessary
screws etc. complete.
9.78
Providing and fixing bright finished brass night latch of approved quality
including necessary screws etc. complete.
9.79
Providing and fixing special quality bright finished brass cupboard or
ward robe locks with four levers of approved quality including necessary
screws etc. complete.
9.79.1 40 mm

Unit

Rate `

each
each
each
each

371.45
330.75
307.55
231.80

each
each
each
each

301.00
239.30
192.85
131.50

each
each

226.35
214.70

each

546.40

each

476.70

each

674.15

each

174.70

9.73

9.79.2
9.79.3
9.79.4
9.80
9.81

9.82
9.83

9.84

50 mm
65 mm
75 mm

Providing and fixing 50 mm bright finished brass cup board or wardrobe

knob of approved quality with necessary screws.
Providing and fixing bright finished brass handles with screws etc.
complete:
9.81.1 125 mm
9.81.2 100 mm
9.81.3 75 mm
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm),
with
necessary accessories and screws etc. complete.
Providing and fixing aluminium extruded section body tubular type
universal hydraulic door closer (having brand logo with ISI, IS : 3564,
embossed on the body, door weight upto 36 kg to 80 kg and door width
from 701 mm to

each
186.35 each
192.15
each
209.55
each

48.30

each
each
each

182.45
170.50
135.65

each

85.70

each

753.75

154

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

Description

1000 mm), with double speed adjustment with necessary accessories

and screws etc. complete.
Providing and fixing bright finished brass casement window fastener with
9.85
necessary screws etc. complete.
Providing and fixing bright finished brass casement stays (straight peg
9.86
type) with necessary screws etc. complete :
9.86.1 300 mm weighing not less than 330
gms 9.86.2 250 mm weighing not less than 280
gms 9.86.3 200 mm weighing not less than 240
gms
9.87
Providing and fixing bright finished brass hasp and
staple (safety type) with necessary screws etc.
complete :
9.87.1
150 mm
9.87.2
115 mm
9.87.3 90 mm
CHROMIUM PLATED BRASS FITTINGS
9.88
Providing and fixing chromium plated brass 100 mm mortice latch
and lock with 6 levers and a pair of lever handles of approved quality with
necessary screws etc. complete.
9.89
Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete.
9.90
Providing and fixing special quality chromium plated brass cupboard locks
with six levers of approved quality including necessary screws etc.
complete.
9.90.1 Size 40 mm
9.90.2 Size 50 mm
9.90.3 Size 65 mm
9.90.4 Size 75 mm
9.91
9.92

9.93
9.94

9.95

Unit

Rate `

each

1043.60

each

79.60

each
each
each

180.15
149.25
137.65

each
each
each

106.65
89.95
78.35

each

790.30

each

732.25

each
each
each
each

174.70
186.35
197.95
227.00

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe

knobs with nuts complete.
each
Providing and fixing chromium plated brass handles with necessary
screws etc. complete:
9.92.1
125 mm
each
9.92.2
100 mm
9.92.3 75 mm
each
Providing and fixing chromium plated brass casement window fastener
with necessary screws etc. complete.
each
Providing and fixing chromium plated brass casement stays (straight
peg type) with necessary screws etc. complete :
9.94.1
300 mm weighing not less than 330 gms
each
9.94.2
250 mm weighing not less than 280 gms
each
9.94.3 200 mm weighing not less than 240 gms
each
ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI
MARKED)
Providing and fixing ISI marked aluminium butt hinges anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade with necessary screws etc. complete:
9.95.1 125x75x4 mm

65.70

240.55
each
211.15
182.10
127.20

208.50
173.65
156.25

9.95.2

125x63x4 mm

SUB HEAD : 9 - WOOD & PVC WORK

each
each

108.85
103.00

155

Code No.

9.96

9.97

9.98

9.99

9.100

9.101

9.102

9.103

Description

Unit

Rate `

9.95.3 100x75x4 mm
9.95.4 100x63x4 mm
9.95.5 100x63x3.2 mm
9.95.6 75x63x4 mm
9.95.7 75x63x3.2 mm
9.95.8 75x45x3.2 mm
Note :- Aluminum hinges shall not be used in wooden shutters, stainless
steel hinges shall be preferred.
Providing and fixing aluminium sliding door bolts, ISI marked
anodised anodic coating not less than grade AC 10 as per IS : 1868),
transparent or dyed to required colour or shade, with nuts and screws
etc. complete :
9.96.1 300x16 mm
9.96.2 250x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868 )
transparent or dyed to required colour or shade, with necessary screws
etc. complete :
9.97.1 300x10 mm
9.97.2 250x10 mm
9.97.3 200x10 mm
9.97.4 150x10 mm
9.97.5 100x10 mm
Providing and fixing aluminium pull bolt lock, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent
or dyed of required colour and shade, with necessary screws bolts, nut
and washers
etc. complete.
Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15
mm, anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade, with necessary
screws etc. complete.
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm
9.100.2 100 mm
9.100.3 75 mm
Providing and fixing aluminium hanging floor door stopper, ISI
marked, anodised (anodic coating not less than grade AC 10 as per
IS : 1868) transparent or dyed to required colour and shade, with
necessary screws etc. complete.
9.101.1 Single rubber stopper
9.101.2 Twin rubber stopper
Providing and fixing aluminium casement stays, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent
or dyed to required colour and shade, with necessary screws etc. complete.
Providing and fixing bright finished brass 100 mm mortice latch and lock,
ISI marked, with six levers and a pair of anodised (anodic coating not
less than grade AC 10 as per IS : 1868) aluminium lever handles of
approved

each
each
each
each
each
each

93.10
91.90
91.90
81.30
78.95
68.50

each
each

229.65
189.00

each
each
each
each
each

112.10
95.25
79.25
65.35
52.35

each

76.80

each

169.20

each
each
each

69.80
55.10
46.95

each
each

37.50
83.95

each

74.95

quality with necessary screws etc. complete.

156

each

815.45

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

9.104

9.105

Description

Providing and fixing aluminium tee channels (heavy duty) with rollers &
stop end in pelmets as curtain rod.
GYPSUM BOARD PARTITIONS
Providing and fixing partition upto ceiling height consisting of G.I.
frame and required board, including providing and fixing of frame work
made of special section power pressed/ roll form G.I. sheet with zinc
coating of 120 gms/sqm(both side inclusive), consisting of floor and
ceiling channel 50mm wide having equal flanges of 32 mm and 0.50
mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre
to centre with dash fastener of 12.5 mm dia meter 50 mm length or
suitable anchor fastener or metal screws with nylon plugs and the
studs 48 mm wide having one flange of 34 mm and other flange 36
mm and 0.50 mm thick fixed vertically within flanges of floor and
ceiling channel and placed at a spacing of 610 mm centre to centre by
6 mm dia bolts and nuts, including fixing of studs along both ends of
partition fixed flush to wall with suitable anchor fastener or metal
screws with nylon plugs at spacing of 450 mm centre to centre, and
fixing of boards to both side of frame work by 25 mm long dry wall
screws on studs, floor and ceiling channels at the spacing of 300 mm
centre to centre. The boards are to be fixed to the frame work with joints
staggered to avoid through cracks, M.S. fixing channel of 99 mm width
(0.9 mm thick having two flanges of 9.5 mm each) to be provided at the
horizontal joints of two boards, fixed to the studs using metal to metal flat
head screws, including jointing and finishing to a flush finish with
recommended jointing compound, jointing tape, angle beads at corners
(25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer
suitable for board as per manufactures
specification and direction of engineer in charge all complete.

Unit

Rate `

metre

64.70

9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin

fire rated board conforming to IS: 2095: part I

sqm

1325.65

9.105.2 75mm overall thickness partition with 12.5 mm thick double skin
tapered edged plain Gypsum board conforming to IS: 2095: part I

sqm

1197.90

9.105.3 66mm overall thickness Partition with 8mm thick double skin
Calcium Silicate Board made with Calcareous & Siliceous
materials reinforced with cellulose fiber manufactured through
autoclaving process with Compressive Strength 225 kg/sq.cm,
Bending Strength 100 kg./ sq.cm
sqm
9.105.4 66mm overall thickness partition using 8mm thick double skin
non- asbestos multipurpose cement board reinforced with
cellulose fibre manufactured through autoclaving process
(High pressure steam cured) as per IS : 14862 with suitable
fibre
cement screws
9.106

1348.90
sqm

Providing and fixing PTMT handles with necessary screws etc. complete.
9.106.1 125x34x24 mm weighing not less than 23
9.106.2 gms

each

45.75

each

51.55

150x34x24 mm weighing not less than 26

gms
9.107

1325.65

Providing and fixing PTMT Butt hinges with necessary screws etc. complete.
9.107.1

9.107.2

75 x 60 x 10 mm
fitted with 5.5 mm
dia M.S. Bright Bar
Rod

weighing not less than 34 gms

each

71.30

100 x 75 x 10 mm fitted with 5.5 mm dia MS Bright Bar Rod

weighing not less than 53 gms

each

90.80

SUB HEAD : 9 - WOOD & PVC WORK

157

Code
No.

9.108

Description

Unit

Rate `

each

88.50

each

113.65

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42

mm with suitable washers weighing not less than 33 gms

each

43.60

Providing and fixing Bamboo jaffery/ fencing consisting of superior

quality 25 mm dia (Average) half cut bamboo placed vertically and fixed
together with three numbers horizontal running members of hollock
wood in scantling of section 50X25 mm, fixed with nails and G.I wire on
existing
support complete as per direction of Engineer-in-charge.

sqm

396.60

Providing and fixing wooden moulded corner beading of triangular

shape to the junction of panelling etc. with iron screws, plugs and
priming coat on unexposed surface etc. complete 2nd class teak wood.
9.111.1 50x50 mm (base and height)

metre

199.85

Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside
and necessary screws etc., complete.
9.108.1 152x42x18 mm weighing not less than 60
9.108.2 gms
202x42x18 mm weighing not less than 78
gms

9.109
9.110

9.111

9.112

Providing and fixing 2nd class teak wood lipping/ moulded beading or
taj beading of size 18X5 mm fixed with wooden adhesive of approved
quality and screws/ nails on the edges of the Pre-laminated particle
board as per
direction of Engineer-in-charge.
metre
9.113
Providing and fixing bright finished 100 mm mortice lock with 6 levers
without pair of handles of approved quality for aluminium door, with
necessary screws etc complete as per direction of Engineerin-charge.
each
9.114
Providing and fixing magnetic catcher of approved quality in cupboard
/ ward robe shutters, including fixing with necessary screws etc. complete.
9.114.1 Triple strip vertical type
each
9.114.2 Double strip (horizontal type)
each
9.115
Providing and fixing powder coated telescopic drawer channels 300
mm long with necessary screws etc. complete as per directions of Engineerincharge.
one set
9.116
Providing and fixing sliding arrangement in racks/
cupboards/cabinets shutter by with stainless steel rollers to run inside C or E
aluminium channel
section (The payment of C or E channel shall be made separately)
each
9.117
Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,
joints mitred and Plastic welded. The hinge side vertical of the frames
reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the
frame complete as per manufacturers specification and direction of
Engineerin-charge
9.117.
9.118
1
9.118.1
9.117.
2

61.80

465.95

28.60
22.80

198.95

12.60

Extruded
section
profile size
48x40 mm
metre
213.75

158

Extruded section profile size 42x50 mm

Providing and fixing to existing door frames.
24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm ( 0.2 mm) with inbuilt edging on both sides.
The styles and rails mitred and joint at the corners by means
of M.S. galvanised/plastic brackets of size 75x220 mm having
wall

metre

202.15

SUB HEAD : 9 - WOOD & PVC WORK

Code No.

Description

thickness 1.0 mm and stainless steel screws. The styles of the

shutter reinforced by inserting galvanised M.S. tube of size
20x20 mm and 1 mm ( 0.1 mm) wall thickness. The lock rail
made up of H section, a uPVC hollow section of size 100x24
mm and 2 mm ( 0.2 mm) wall thickness, fixed to the
shutter styles by means of plastic/galvanised M.S. U cleats.
The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness
of 20 mm and 1 mm ( 0.1 mm) wall thickness. The panels
filled vertically and tie bar at two places by inserting
horizontally 6 mm galvanised M.S. rod and fastened with
nuts and washers, complete as per manufacturers
specification and direction of Engineer-in-charge.
(For W.C. and bathroom door shutter).
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow section of
size 60x30 mm and wall thickness 2 mm ( 0.2 mm), with
inbuilt decorative moulding edging on one side. The styles
and rails mitred and joint at the corners by means of M.S.
galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws. The styles of
the shutter reinforced by inserting galvanised M.S. tube of
size 25x20 mm and 1 mm ( 0.1 mm) wall thickness. The
lock rail made up of H section, a uPVC hollow section of
size 100x30 mm and 2 mm ( 0.2 mm) wall thickness fixed
to the shutter styles by means of plastic/ galvanised M.S.
U cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm,
having over all thickness of 20 mm and 1 mm ( 0.1 mm) wall
thickness . The panels filled vertically and tie bar at two places
by inserting horizontally 6 mm galvanised M.S. rod and
fastened with nuts and washers, complete as per
9.118.3 manufacturers specification and direction of Engineer-in-charge.
25 mm thick PVC flush door shutters made out of a one piece
Multi chamber extruded PVC section of the size of 762 mm X
25 mm or less as per requirement with an average wall
thickness of 1 mm ( 0.3 mm). PVC foam end cap of size
23x10 mm are provided on both vertical edges to ensure the
overall thickness of 25 mm. M.S. tube having dimensions 19
mm x 19 mm and 1.0 mm ( 0.1 mm) is inserted along the
hinge side of the door. Core of the door shutter should be filled
with High Density Polyurethane foam. The Top & Bottom
edges of the shutter are covered with an end-cap of the size
25 mm X 11 mm. Door shutter shall be reinforced with
special polymeric reinforcements as per manufacturers
specification and direction of Engineer-in-charge to take up
necessary hardware and fixtures. Stickers indicating the
locations of hardware will be pasted at appropriate
places
9.119

Providing and fixing factory made P.V.C. door frame of size 50x47
mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC

Unit

Rate `

2718.60
sqm

2834.75
sqm

2718.60

sqm

foam sheet, mitred at corners and joined with 2 Nos of 150 mm long
brackets of 15x15 mm M.S. square tube, the vertical door frame
profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge,
EPDM rubber
SUB HEAD : 9 - WOOD & PVC WORK

159

Code
No.

9.120

9.121

9.122

Description

Unit

Rate `

metre

458.95

9.120.1 30 mm thick plain PVC door shutters

sqm

2749.60

9.120.2 30 mm thick pre laminated PVC door shutters

sqm

3214.20

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames
of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15
mm to receive shutter of 30 mm thickness .The laminate shall be
moulded with fire resistant grade unsaturated polyester resin and
chopped mat. Door frame laminate shall be 2 mm thick and shall be
filled with suitable wooden block in all the three legs. The frame shall be
covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady]
the frame.

metre

482.20

gasket weather seal to be provided through out the frame. The door
frame to be fixed to the wall using M.S. screws of 65/100 mm size,
complete as
per manufacturers specification and direction of Engineerin-Charge.
Providing and fixing factory made panel PVC door shutter consisting of
frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm
x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame
shall have a coat of steel primers of approved make and manufacture.
M.S. frame covered with 5 mm thick heat moulded PVC C channel of
size 30 mm thickness, 70 mm width out of which 50 mm shall be flat
and 20 mm shall be tapered in 45 degree angle on both side forming
styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm
shall be flat and 20 mm shall be tapered in 45 degree on the inner side
to form top and bottom rail and 115 mm wide PVC sheet out of which
75 mm shall be flat and 20 mm shall be tapered on both sides to form
lock rail. Top, bottom and lock rails shall be provided both side of the
panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be
provided as gap insert for top rail & bottom rail, paneling of 5 mm thick
both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the
styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet
beading on inner side, and joined together with solvent cement
adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be
stuck on the interior side of the C Channel using PVC solvent adhesive
etc. complete as per direction of Engineer-in-charge, manufacturers
specification & drawing.

Providing and fixing to existing door frames.

9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP laminate for
forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for
fixing of fittings, cast monolithically with 5 mm thick FRP
laminate for panels confor9.122.2 ming to IS: 14856, including fixing to frames.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush

door shutter in different plain and wood finish made with fire
retardant grade unsaturated polyester resin, moulded to 3 mm
thick FRP laminate all around, with suitable wooden blocks
inside at required places for fixing of fittings and
polyurethane foam (PUF)/ Polystyrene foam to be used as
filler material throughout the hollow panel, casted

sqm

monol
ithicall
y with
testin
g
param
eters
of
F.R.P.
lamin
ate
confor
ming
to
table 3 of

IS: 14856,
complete
as per direction of
Engineer-in-charge.
sqm
2401.15
2749.60

160

SUB HEAD : 9 - WOOD & PVC WORK

Code
No.

9.123

9.124

9.124.1

Description

Providing and fixing factory made door frame (single rebate) made out
of single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width
& 32 mm thickness, frame will be mitred & Jointed with self driven self
tapping screws of size 38 mm x 4 mm & PVC solvent cement , including
fixing the frame to wall with suitable dia & length anchor fastener as per
manufacturers specification and direction of Engineer-in-charge.

9.127

9.128

377.65

2691.55

Non decorative finish

sqm

9.124.2 Decorative finish (both side wood grained finish)

sqm

Providing and fixing PVC rigid foam sheet 1 mm thick on

existing door shutters (bathroom and W.C. doors) using
synthetic rubber
based adhesive.

Rate `

metre

Providing and fixing factory made 30 mm thick door shutter made of

solid PVC foam profile. The styles & rails shall be of size 75 mm x
30 mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power. The styles and
rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1
mm, painted with primer , all four corners of reinforcement to be
welded or sealed. Solid PVC extruded bidding (push fit type) will be set
inside the styles and the rails with a cavity, to receive single piece
extruded 5 mm PVC sheet as panel. The styles and rails will be mitred
cut and joint with the help of PVC solvent cement & self driven self
tapping screws. Single piece extruded solid PVC lock rail of size 100
mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in
the middle of the lock rail & fixed with styles with the help of PVC
solvent cement & self driven self tapping screws of size 100 mm x 8
mm complete as per manufacturers specifications and direction of
Engineer-in-charge.

9.125

9.126

Unit

3330.35

803.30
sqm

Providing and fixing 12 mm thick panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors, windows and
clerestory windows (area of opening for panel inserts excluding portion
inside grooves or rebates to be measured). Panelling for panelled or
panelled and glazed shutters 25 mm to 40 mm thick.
9.126.1 Marine plywood conforming to IS: 710

sqm

1627.95

9.126.2 Fire retardant plywood conforming to IS: 5509

sqm

1669.55

9.127.1 1.5 mm thick

sqm

829.70

9.127.2 1.0 mm thick

sqm

676.40

Providing & Fixing decorative high pressure laminated sheet of plain

/ wood grain in gloss / matt / suede finish with high density protective
surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.

Providing and fixing factory made Fiberglass Reinforced plastics

(F.R.P.) chajja 4 mm thick of required colour, size and design made
by Resin Transfer Moulding (RTM) Machine Technology, resulting in
void free compact laminate in single piece, having smooth gradual
slope curvature for easy drainage of water and duly reinforced by 2nos
vertically and 1nos horizontally 50x2 mm thick M.S. flat with 12 mm in
built hole for grouting on the existing wall along with the 50 mm flanges

duly inserted and sealed

SUB HEAD : 9 - WOOD & PVC WORK

161

Code
No.

9.129

9.130

Description

Unit

in the wall complete in one single piece casted monolithically, including

all necessary fittings . The FRP Chajja should be manufactured
using unsaturated Polyester resin as per IS: 6746, duly reinforced
with fibre glass chopped strand mat (CSM) as per IS: 11551 complete
with protective Gel coat U/V coating on Top for complete resistance
from the extreme of
temperature, weather & sunlight.

sqm

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated

flat pressed three layer particle board or graded wood particle board IS:
12823 marked, exterior grade (Grade l Type ll), having one side
decorative lamination and other side balancing lamination, including
IInd class teak wood lipping of 25 mm wide x12 mm thick with
necessary screws and bright finished stainless steel piano hinges,
complete as per direction of
the Engineer-in-Charge

5060.75

1629.75
sqm

Providing and fixing cup board shutters with 25 mm thick veneered

particle board IS : 3097 marked, exterior grade (Grade I), of
approved make, including IInd class teak wood lipping of 25 mm wide x
12 mm thick with necessary screws and bright finished stainless
steel piano hinges, complete as per direction of Engineer-in-Charge.
9.130.1 With decorative veneering on one side and commercial veneering
on other side
sqm
9.130.2 With non decorative veneering on both sides
9.131

9.133

1409.05

sqm

1304.55

sqm

1310.30

kg

442.35

Providing and fixing factory made shutters of Pre-laminated particle

board flat pressed three layer or graded wood particle board with
one side decorative finish and other side balancing lamination
conforming to IS: 12823 Grade l Type ll, of approved design, and edges
sealed with water resistant paint and lipped with aluminium U type
edge beading allround the shutter, including fixing with angle cleat, grip
strip, cadmium plated steel screws, including fixing of aluminium
hinges 100x63x4 mm etc. complete as per architectural drawing and
direction of Engineer-in-Charge (Cost of U beading and hinges will be
paid for separately).
9.131.1 25 mm thick

9.132

Rate `

Providing and fixing aluminum U beading of required size to Prelaminated/ flush door shutter, including fixing etc. complete as per
direction of
Engineer-in-charge.
Providing and fixing, in position concealed G.I. section for wall
paneling using board of required thickness fixed on the W profile (0.55
mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm
each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel
having one flange of 20 mm and another flange of 30 mm with thickness
of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the
floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully
threaded self-tapping dry wall screws. Board is fixed to the W
profile with 25 mm countersunk ribbed head screws @ 200 mm C/C.,
all complete as per the drawing & directions of engineer-in-charge, the
joints of the boards are finished with specially formulated jointing
compound and 48 mm wide jointing tape to provide seamless finish.
9.133.1

Tapered edge calcium silicate board made with calcareous

& siliceous materials reinforced with cellulose fiber

manufactured through autoclaving process to give stable

crystalline structure

162

SUB HEAD : 9 - WOOD & PVC WORK

Code No.

Description

Unit

Rate `

sqm

1002.15

sqm

823.20

sqm

740.15

with compressive strength 225 kg/ sq.cm, Bending strength

100 kg/sq.cm.
9.133.1.1 10mm thick
9.133.2

Multipurpose cement board reinforced with cellulose

fibre manufactured through autoclaving process (high
pressure
steam cured) as per IS : 14862 with suitable fibre cement screw.

9.133.2.1 18 mm thick
9.133.3

Gypsum board conforming to IS: 2095 Part - I .

9.133.3.1 12.5 mm thick

9.134

Providing and fixing wire gauge shutters using stainless steel grade 304
wire gauge with wire of dia 0.5 mm and average width of aperture 1.4
mm in both directions for doors, windows and clerestory windows
with necessary screws :
9.134.1

35 mm thick shutters

9. 134.1.1

with ISI marked M.S. pressed butt hinges bright finished of

required size

9. 134.1.1.1 Second class teak wood

sqm
3502.80 sqm

9. 134.1.1.2 Kiln seasoned and chemically treated hollock

wood
9. 134.1.1.3 Kiln seasoned selected class of sheesham wood
9. 134.1.2

2537.10
sqm

With ISI marked stainless steel butt hinges of required size

9. 134.1.2.1 Second class teak wood

sqm

9. 134.1.2.2 Kiln seasoned and chemically treated hollock

wood
9. 134.1.2.3 Kiln seasoned selected class of sheesham wood
9. 134.2

30 mm thick shutters

9.134.2.1

with ISI marked M.S. pressed butt hinges bright finished of

required size

3756.30 sqm
2790.60
sqm

9. 134.2.1.1 Second class teak wood

3149.00 sqm
2323.60

9. 134.2.1.3 Kiln seasoned selected class of sheesham wood

sqm

2930.15

9. 134.2.2.1 Second class teak wood

sqm

3402.50

9.134.2.2.2 Kiln seasoned and chemically treated hollock wood

sqm

2577.05

9.134.2.2.3 Kiln seasoned selected class of sheesham wood

sqm

3183.65

9. 134.2.2

9.136

3500.65

sqm

9. 134.2.1.2 Kiln seasoned and chemically treated hollock wood

9.135

3247.15

With ISI marked stainless steel butt hinges of required size

Providing and fixing fly proof stainless steel grade 304 wire gauge,
to windows and clerestory windows using wire gauge with average
width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete.
9.135.1

With 2nd class teak wood beading 62X19 mm

sqm

1600.95

9.135.2

With 12 mm mild steel U beading

sqm

1317.55

Providing and fixing fire resistant door frame of section 143 x 57 mm

having built in rebate made out of 16 SWG G.I. sheet (zinc coating not
less than 120 gm/sqm) duly filled with vermuculite based concrete mix,
suitable for mounting 60 minutes fire rated door shutters. The frame
is fitted with

SUB HEAD : 9 - WOOD & PVC WORK

163

Code
No.

9.137

9.138

Description

intumuscent fire seal strip of size 10x4 mm (minimum) alround the

frame and fixing with dash fastener of approved size and make,
including applying a coat of approved brand fire resistant primer etc.
complete as per direction of Engineer-in-charge (Dash fastener to be
paid for separately).

9.140

9.141

9.142

Rate `

metre

1250.05

Providing and fixing 50 mm thick glazed fire resistant door shutters of

60 minutes fire rating conforming to IS:3614 (Part-II), tested and
certified as per laboratory approved by Engineer-in-charge, with
suitable mounting on door frame, consisting of vertical styles, lock
rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16
SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR
insulation material and fixing with necessary stainless steel ball bearing
hinges of approved make, including applying a coat of approved fire
resistant primer etc. all complete
as per direction of Engineer-in-charge (panneling to be paid for separately). sqm

6268.20

Providing and fixing glazing in fire resistant door shutters, fixed panels,
ventilators and partitions etc., with G.I. beading of appropriate size,
made out of 20 SWG G.I.sheet (zinc coating not less than 120
gm/m2), fire resistant sealant, including applying a coat of approved fire
resistant primer on G.I. beading etc., complete all as per direction of
Engineer-in-charge.
9.138.1 With clear fire resistant glass panes 6mm thick of approved
brand, having minimum 60 minutes fire resistance

9.139

Unit

sqm

27658.70

Providing and fixing panic bar / latch (Double point) fitted with a single
body, Trim Latch & Lock on back side of the Panic Latch of reputed brand
and manufacture to be approved by the Engineer- in- charge, all complete. each

6133.20

Providing and fixing plain lining with necessary screws/nuts & bolts/
nails, including a coat of approved primer on one face, and fixed on
wooden / steel frame work, complete as per direction of Engineerincharge (Frame work shall be paid for separately).
9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type

sqm

Providing and fixing PVC Door Frame of size 50x47 mm with a wall
thickness of 5 mm ( 0.2 mm), made out of single piece extruded PVC
profile, with mitred cut joints and joint with 2 nos of PVC bracket of size
190 mm x 100 mm long arms of cross section size 35 x 15 mm & self
driven self taping screws, the vertical door profiles to be reinforced with
40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM
rubber gasket weather seal throughout the frame, including jointing
5 mm PVC frame strip with PVC solvent cement on the back of the
profile. The door frame to be fixed to the wall using 8 x100 mm long
anchor fasteners complete, all as per manufacturers specification and
direction of Engineer
-in- charge.

metre

35 mm thick factory made Solid panel PVC Door shutter, made out
of single piece extruded soild PVC profiles, 5 mm ( 0.2 mm) thick,
having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm,
out of which 75 mm shall be flat and 20 mm shall be tapered (on both
side), having one side thickness of 15 mm integrally extruded on the
hinge side of the profile for better screw holding power, including
reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles
& rails to be mitered cut & joint with the help of PVC solvent cement,
self driven self tapping screws & M.S. rectangular pipes bracket of size

1059.20

611.55

190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at

each corner. Single piece

164

SUB HEAD : 9 - WOOD & PVC WORK

Code No.

Description

Unit

Rate `

9.142.1 Non decorative finish (matt finish)

sqm

2700.20

9.142.2 Decorative finish (wood grained finish)

sqm

3222.90

extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of
which 75 mm to be flat and 20 mm to be tapered at both ends, having
15 mm solid core in middle of rail section integrally extruded, fixing the
styles & rails with the help of solvent and self driven self tapping screws
of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC
extruded sheet inserted in the door as panel, all complete as per
manufacturers specification and direction of Engineer-in-charge.

9.143

9.144

9.145

9.146

Providing and Fixing factory made uPVC door frame, made of uPVC
exturded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm
( 0.2 mm) , corners of the door frame to be mitred cut and jointed
with plastic brackets and stainless steel screws, reinforcing hinge side
vertical of the frames with PVC profile of Size 28 mm x 30 mm having
wall thickness 2 mm (0.2 mm), including providing & fixing 3 nos of 125
mm long stainless steel hinges to the frame, fixing the frame with jamb
with required number & size of anchor dash fastners, all complete as per
manufacturers
specification and direction of Engineer-in-charge.

metre

Providing and fixing 37 mm thick factory made PVC door shutter, styles
and rails made of PVC hollow section of size 100 mm x 37 mm with wall
thickness 2 mm ( 0.2 mm), with inbuilt bead on one side, styles and
rails mitered cut and joint at the corners by means of 2 nos of plastic
brackets of size 75 mm x 220 mm at each corner and stainless steel
screws, reinforcing the hinge side of style by inserting PVC profile of
size 28 mm x 30 mm, with wall thickness 2 mm ( 0.2 mm). Lockrail of
size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed
to the vertical styles. Providing with PVC snapfit beads and panel of
size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and
fastening with nuts and washers complete, all as per manufacturers
specification and direction
of Engineer-in-charge.

sqm

Providing and Fixing factory made PVC door frame made of PVC
extruded sections of size 75 mm x 53 mm, having wall thickness 2.0
mm ( 0.2 mm). Both verticals sides of the frame reinforced with PVC
profile of cross section size 28 mm x 30 mm x 2 mm thickness ( 0.2
mm) and 75 mm x 200 mm long, including reinforcing both ends of the
top frame with PVC profile. PVC Door Frame and PVC reinforcement
profile to be mitred cut, jointed and fusion welded together, including
providing and fixing 3 nos of 125 mm long stainless steel hinges to
frame, fixing the frame with jamb with required nos & sizes of anchor
dash fastener, all complete as per
manufacturers specification and direction of engineerin-charge.
Providing and fixing 37 mm thick factory made PVC Door shutter,
styles and rails made of PVC hollow extruded printed and laminated
section having overall dimension 115 mm x 37 mm with wall thickness
2 mm ( 0.2 mm) with inbuilt beading on one side, the styles and rails
mitred cut and joint at corners by inserting 2 nos PVC profile
reinforcement of size 75 mm x 200 mm long with cross section size of
28 mm x 30 mm having wall thickness 2 mm ( 0.2 mm). Styles, rails
and reinforcements to be fusion welded together. Only hinge side
vertical style to be reinforced with PVC profile reinforcement in full

metre

length
.
Printe
d and
lamin
ated
PVC
lock
rail of
size
110
mm x
37
mm
havin
g wall
thickn
ess 2
mm
( 0.2
mm)
to be

2950.90
422.85

469.30
SUB HEAD : 9 - WOOD & PVC WORK

165

Code
No.

9.147

Description

Unit

welded horizontally with the vertical styles after inserting PVC profile
reinforcement as in styles and rails, providing with PVC snap fit
beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos
6 mm dia bright steel rod horizontally with both side threaded and
tightened with check nuts and washers complete, all as per
manufacturers specification
and direction of engineer-in-charge.

sqm

Rate `

3183.20

Providing and Fixing factory made uPVC white colour casement/sliding

window / door, made of extruded profiles. Profiles of frames and sash
will be mitered cut and fusion welded at all corners, including drilling of
holes for fixing hardware and drainage of water etc., making
arrangement for fixing of hardware, EPDM gasket, 1.2 0.2 mm thick
galvanised steel profile to be inserted in required profile, frame will be
fixed to the wall with 8 mm x 100 mm long fasteners, all complete as
per direction of Engineer-in-charge. (Glazing, hardware hinges and
fitting etc. to be paid separately.)
Note :- Each member of window to be measured separately with clear
length.
9.147.1

Casement Window (Outward/Inward opening) with hinge System

9.147.1.1 Frame (50 mm x 50 mm)

metre

436.85

9.147.1.2 Sash (Style and Rail) (62 mm x 34 mm)

metre

418.55

9.147.1.3 Mullion (intermediate Section) (66 mm x 50 mm)

metre

461.25

(24 mm x 34.5 mm)

metre

100.15

9.147.1.5 Glazing bead (12 mm x 18 mm)

metre

130.65

metre

491.70

metre

528.30

metre

174.55

9.147.1.4 T Profile (one vertical length in between two shutters)

9.147.2

Casement Window (With friction hinge & outward opening)

9.147.2.1 Casement Frame (67 mm x 62 mm)

9.147.2.2 Casement Window Sash / Mullion (67 mm x 75 mm ) (style,
rail and intermediate section)
9.147.2.3 Casement Glazing bead (35 mm x 18 mm)
9.147.3

Sliding Window (Two Track, 2/4 Shutters)

9.147.3.1 Two Track Sliding Frame (67 mm x 52 mm)

9.147.3.2 Sliding window Sash (60 mm x 44 mm)

metre
586.20 metre
544.75

9.147.3.3 Sliding Interlock for Window (one vertical length in each

shutter)( 45.5 mm x 28 mm)
9.147.3.4 Sliding Glazing bead (35 mm x 18 mm)
9.147.4

metre

149.95

metre

174.55

Sliding Door (Two Track, 2/4 Shutters)

9.147.4.1 Two Track Sliding Frame (67 mm x 52 mm)

metre

562.40 9.147.4.2 Sliding Door Sash (80 mm x 44 mm)

metre
683.90

9.148

9.147.4.3 Sliding Interlock for Door (one vertical length in each shutter)
(45.5 mm x 28 mm)

metre

149.95

9.147.4.4 Sliding Glazing bead (35 mm x 18 mm)

metre

174.55

Providing and fixing stainless steel (SS-304 grade) friction hinges to

the side/ top hung uPVC windows, of approved quality, with

necessary stainless steel screws etc. as per direction of Engineer-incharge.

166

SUB HEAD : 9 - WOOD & PVC WORK

Code No.

Description

Unit

Rate `

9.148.1

200 x 19 x 1.9 mm

each

304.25

9.148.2

250 x 19 x 1.9 mm

each

362.35

9.148.3

300 x 19 x 1.9 mm

each

455.25

9.148.4

350 x 19 x 1.9 mm

each

524.95

9.148.5

400 x 19 x 1.9 mm

each

652.70

9.149

Providing and fixing casement handle made of zinc alloyed (white powder
coated) for uPVC casement window with necessary screws etc. complete. each

216.65

9.150

Providing and fixing zinc alloyed (white powder coated) touch lock for
uPVC sliding window with necessary screws etc. complete.

146.95
each

Providing and fixing steel roller for uPVC sliding window with necessary
screws etc. complete.

each

Providing and fixing steel roller for uPVC sliding door with necessary
screws etc. complete.

each

Providing and fixing steel (white power coated) crescent lock for uPVC
sliding window/ door with necessary screws etc. complete.

each

9.151
9.152
9.153
9.154

9.155

9.156

Providing and fixing frame work for partitions/ wall lining etc. made of
50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor
in a grid pattern with spacing @ 60 cm centre to centre both ways
(vertically & horizontally) or at required spacing near opening, with
necessary welding at junctions and fixing the frame to wall/ ceiling/
floors with steel dash fasteners of 8 mm dia, 75 mm long bolt,
including making provision for opening for doors, windows, electrical
conduits, switch boards etc., including providing with two coats of
approved steel primer etc. complete,
all as per direction of Engineer-in-charge.
Providing and fixing panelling or paneling and glazing in panelled
or panelled and glazed shutters for doors, windows and clerestory
windows ( area of opening for panel inserts excluding portion inside
grooves or rebated to be measured). Panelling for panelled and glazed
shutters 25mm to 40mm thick: Pre-laminated with decorative
lamination on both side
exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

112.10
135.35

94.60
kg

1441.40
sqm

Providing and fixing Pre -laminated medium density fibre board

exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or
studding with screws etc. complete ( Frames, backing or studding to
be paid separately).
9.156.1 Pre-laminated with decorative lamination on both side
exterior Grade - I MDF Board 12 mm thick confirming to
9.156.2 IS:14587
Pre-laminated with decorative lamination on both side
exterior Grade - I MDF Board 18 mm thick confirming to
IS:14587

9.157

71.45

Providing and fixing Pre-laminated medium density fibre board IS:

14587:1998 marked, with one side decorative lamination other side
balancing lamination Grade-I(exterior grade) in shelves with screws and
fittings wherever required, edges to be sealed with PVC edge bending
tape 2.00 mm thick of approved brand (fittings to be paid separately).

sqm

979.80

sqm

1042.65

9.157.1 Pre-laminated with decorative lamination one side and other

side balancing lamination exterior Grade - I MDF Board 18 mm
thick confirming to IS:14587

SUB HEAD : 9 - WOOD & PVC WORK

sqm

1394.55

167

Code No.

Description

Unit

9.157.2 Pre-laminated with decorative lamination one side and other

side balancing lamination exterior Grade - I MDF Board 25 mm
thick confirming to IS:14587

sqm

9.158

9.159

9.160

Rate `

1818.40

Providing and fixing in wall lining medium density fibre board

IS: 14587:1998 marked, Pre-laminated one side decorative
lamination and other side balancing lamination, with
necessary fixing arrangement and screws etc. complete.

1016.70

9.158.1 12 mm thick.

sqm

1304.15

9.158.2 18 mm thick.

sqm

1744.95

9.158.3 25 mm thick.

sqm

Providing and fixing 25mm thick pre-laminated medium density fibre

board exterior grade ( Grade-I) IS:14587:1998 marked one side
decorative and other side balancing lamination for cupboard shutters
edges to be sealed with PVC edge bending tape 2.00 mm thick of
approved brand including ISI marked nickeled plated bright finishing
M.S. piano hinges IS:3818
marked with necessary screwed complete.

sqm

1883.00

9.160.1 18 mm thick.

sqm

1670.00

9.160.2 25 mm thick.

sqm

2110.80

Providing and fixing skirting with Pre-laminated medium density fibre

board exterior grade (Grade-I) IS: 14587:1998 marked, (one side
decorative and other side balancing lamination) with necessary fixing
arrangements and screws, including drilling necessary holes for rawl
plugs etc. and edges to be sealed with PVC edge bending tape 2.00
mm thick of approved brand complete.

168

SUB HEAD : 9 - WOOD & PVC WORK

SUB HEAD : 10.0

STEEL WORK

169

170

Code
No.

0100
0101
0102
0103
011
2
011
4
011
6
011
9
0123
0124
0139
0595
0969
0973
0974
0975
0976
0977
0978
1002
1003
1007
1008
1009
1010
1011
1013
1019
1020
1034
1035
1036
1143
1214

1215
1221
1222

B
BASI
RA l
(10.a
STEc
SORK
k
Descrip
tion

B
a
n
d
h
a
n
i
B
h
i
s
t
i
B
l
a
c
k
s
m
i
t
h
1
s
t
c
l
a
s
s

s
m
i
t
h
2
n
d
c
l
a
s
s
C
a
r
p
e
n
t
e
r
2
n
d
c
l
a
s
s
B
e
l
d

a
r
F
i
t
t
e
r
(
g
r
a
d
e
1
)
G
l
a
z
i
e
r
M
a
s
o
n

r) 1 st class Mason (brick

layer) 2nd class
Skilled Beldar (for floor rubbing etc.)
Bright finished or black enameled mild steel butt hinges 100 x 58 x 1.90
mm
Pulley 25 mm dia
Rolling shutter made of 80x1.25 mm machine rolled laths
Top cover for rolling shutters 1.25 mm thick
27.5 cm long wire spring grade No. 2 for rolling shutters
Ball bearing for rolling shutters
Extra for mechanical devices chain and cranked operation for operating
rolling shutters: exceeding 10.00 sqm and up to 16.80 sqm area of door
Extra for mechanical devices chain and cranked operation for operating
rolling shutters: exceeding 16.80 sqm area of door
Mild steel round bar 12 mm dia and below
Mild steel round bar above 12 mm dia
Structural steel such as tees, angles channels and R.S. joists
Flats up to 10 mm in thickness
Flats exceeding 10 mm in thickness
Mild steel plates
Steel glazed door,window/ ventilator, all members viz. F7D, F4B,
K11 and K12B etc.
Mild steel sheets for tanks
Mild steel hooks
Mild steel rivets
Bolts and nuts up to 300 mm in length
Bolts and nuts above 300 mm in length
Iron pintels including welded pin
Steel beading
Welding by gas plant
Welding by electric plant
20 mm dia holding down bolts
Mild steel sheets with bolts and nuts to rest on pintels

(
b
r
i
c
k
l
a
y
e
SUB HEAD : 10 - STEEL WORK

Unit

Rate `

day
day
day
day
day
day
day
day
day
day
day

363.00
363.00
435.00
399.00
399.00
329.00
435.00
399.00
435.00
399.00
363.00

10 Nos
each
sqm
metre
each
each

90.00
40.00
1300.00
620.00
280.00
330.00

sqm

600.00

sqm
quintal
quintal
quintal
quintal
quintal
quintal

600.00
4500.00
4400.00
4636.00
4200.00
4300.00
4500.00

kg
quintal

52.00
5000.00

each
quintal

35.00
5200.00

quintal
quintal

5600.00
5800.00

each
metre

40.00
27.00

cm
cm

2.00
2.00

quintal
each

6000.00
130.00

171

Code
No.

1549
2205
2271
2406
2407
2506

2507

2508

2509

2510

4001
4002
4006
4007
4008
4009
4010
4011
4012
4013
7029
7044
7045
7046
7047
7068
8737
9999

Description

G.I. pipes 40 mm dia

Carriage of steel
Carriage of G.I. pipes below 100 mm dia
Float glass sheet of nominal thickness 4 mm (weight not less than 10
kg/ sqm)
Float glass sheet of nominal thickness 5.5 mm (weight not less than
13.50 kg/sqm)
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10
mm dia polyamide PA 6 grade sleave. Size 10 mm x 60 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10
mm dia polyamide PA 6 grade sleave. Size 10 mm x 80 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10
mm dia polyamide PA 6 grade sleave. Size 10 mm x 120 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10
mm dia polyamide PA 6 grade sleave. Size 10 mm x 140 mm
Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia
double threaded 6.8 grade counter sunk head screw comprising of 10
mm dia polyamide PA 6 grade sleave. Size 10 mm x 160 mm
Stainless steel (Grade-304)hollow section round/square tubes
Stainless steel bolts/square bar and plates
Pressed steel door frames (mild steel sheet 1.60 mm) Profile B
Pressed steel door frames (mild steel sheet 1.60 mm) Profile C
Pressed steel door frames (mild steel sheet 1.60 mm) Profile E
Mild steel tubes hot finished welded type
Mild steel tubes hot finished seamless type
Mild steel tubes electric resistant or induction butt welded
Circular C.I. Box for ceiling fan
Pulley 40 mm dia
Galvanised wire mesh of average width of aperture 1.4 mm and nominal
dia of wire 0.63 mm
Rolling shutters of 80x0.90 mm laths
Rolling shutters of 80x1.2 mm laths
Top cover of Rolling shutters 0.90 mm
thick Top cover of Rolling shutters 1.20 mm
thick
Extra for providing grilled rolling shutters with 8 mm dia M.S. rod
Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50 mm
dia wire
Sundries

Unit

Rate `

metre
tonne
tonne

220.00
94.65
94.65

sqm

345.00

sqm

520.00

10 Nos

260.00

10 Nos

300.00

10 Nos

365.00

10 Nos

460.00

10 Nos
kg
kg
metre
metre
metre
kilogram
kilogram
kilogram
each
each

575.00
350.00
130.00
230.00
250.00
270.00
55.00
65.00
72.00
62.00
32.00

sqm
sqm
sqm
metre
metre
sqm

260.00
1100.00
1200.00
330.00
350.00
270.00

sqm
L.S.

840.00
1.78

172

SUB HEAD : 10 - STEEL WORK

10.0 STEEL WORK

Code
No.

10.1

10.2

10.3

10.4

10.5

Description

Structural steel work in single section, fixed with or without connecting

plate, including cutting, hoisting, fixing in position and applying a
priming
coat of approved steel primer all complete.
Structural steel work riveted, bolted or welded in built up sections,
trusses and framed work, including cutting, hoisting, fixing in position
and applying
a priming coat of approved steel primer all complete.

Rate `
Unit

67.70
kg
73.95
kg

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm
size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,
handles,
including applying a priming coat of approved steel primer.

5291.30

sqm

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame

and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset
plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm
angle and T-iron guide at the top and bottom respectively, including
applying a priming
coat of approved steel primer.

3547.30

sqm

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6
mm angle iron and 3 mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a
priming coat of approved steel primer.

10.6

10.5.1

Using M.S. angels 40x40x6 mm for diagonal braces

sqm

3073.85

10.5.2

Using flats 30x6mm for diagonal braces and central cross piece

sqm

2906.65

Supplying and fixing rolling shutters of approved make, made of

required size M.S. laths, interlocked together through their entire length
and jointed together at the end by end locks, mounted on specially
designed pipe shaft with brackets, side guides and arrangements for
inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire
springs manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 -part 1 and M.S. top cover of required thickness
for rolling shutters.
10.6.1

80x1.25 mm M.S. laths with 1.25 mm thick top cover

sqm

10.6.2

80x1.20 mm M.S. laths with 1.20 mm thick top cover

2142.10 sqm

10.6.3

80x0.90 mm M.S. laths with 0.90 mm thick top cover

1921.40

10.7

Providing and fixing ball bearing for rolling shutters.

10.8

Extra for providing mechanical device chain and crank operation for
operating rolling shutters.

10.9

sqm

1797.50

each

438.95

10.8.1

Exceeding 10.00 sqm and upto 16.80 sqm in the area

sqm

724.85

10.8.2

Exceeding 16.80 sqm in area

sqm

724.85

Extra for providing grilled rolling shutters manufactured out of 8 mm

dia M.S. bar instead of laths as per design approved by Engineer-in- charge,
(area of grill to be measured).

SUB HEAD : 10 - STEEL WORK

sqm

313.60

173

Code
No.

10.10

10.11

10.12

10.13

10.14

Description

Fixing standard steel glazed doors, windows and ventilators in walls,

including fixing of float glass panes with glazing clips and special
metalsash putty of approved make, or metal beading with screws, (only
steel windows, glass panes cut to size and glazing clips or metal
beading with screws, shall be supplied by department free of cost.
10.10.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse
10.10.2 sand : 6 graded stone aggregate 20 mm nominal size)
Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)
Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators, side /top /centre hung, with beading and all
members such as F7D, F4B, K11 B and K12 B etc. complete of
standard rolled steel sections, joints mitred and flash butt welded and
sash bars tenoned and riveted, including providing and fixing of
hinges, pivots, including priming coat of approved steel primer, but
excluding the cost of other fittings, complete all as per approved
design, (sectional weight of only steel members shall be measured for
payment).
10.11.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse
10.11.2 sand : 6 graded stone aggregate 20 mm nominal size)
Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)
Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm
(box type), approved shape and section with screws instead of glazing
clips and metal sash putty, in steel doors, windows, ventilators and
composite
units.
Providing and fixing T-iron frames for doors, windows and ventilators of
mild steel Tee-sections, joints mitred and welded, including fixing
of necessary butt hinges and screws and applying a priming coat of
approved steel primer.
10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse
sand
:
6
graded
stone
aggregate
20
mm
nominal
size)
10.13.2
Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)
Providing and fixing pressed steel door frames conforming to IS:
4351, manufactured from commercial mild steel sheet of 1.60 mm
thickness, including hinges, jamb, lock jamb, bead and if required angle
threshold of mild steel angle of section 50x25 mm, or base ties of 1.60
mm, pressed mild steel welded or rigidly fixed together by mechanical
means, including M.S. pressed butt hinges 2.5 mm thick with mortar
guards, lock strikeplate and shock absorbers as specified and applying
a coat of approved steel primer after pre-treatment of the surface as
directed by Engineerin-charge: 10.14.1
Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb
10.14.1.2 Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)

Unit

Rate `

kg

36.40

kg

19.35

kg

114.15

kg

77.75

metre

38.55

kg

83.70

kg

80.15

metre

377.70

metre

369.45

10.14.2 Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb

174

metre

400.95

SUB HEAD : 10 - STEEL WORK

Code No.

10.15

Description

Unit

Rate `

metre

392.70

metre

424.20

metre

415.90

kg

139.10

kg

130.40

10.16.1 Hot finished welded type tubes

kg

102.90

10.16.2 Hot finished seamless type tubes

kg

115.10

10.16.3 Electric resistance or induction butt welded tubes

kg

123.65

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S.

bar, bent to shape with hooked ends in R.C.C. slabs or beams during
laying, including painting the exposed portion of loop, all as per
standard design
complete.

each

124.45

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box
for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5
mm thick M.S. sheet with its top surface hacked for proper bonding,
top lid shall be screwed into the cast iron/ M.S. sheet box by means of
3.3 mm dia round headed screws, one lock at the corners. Clamp shall
be made
of 12 mm dia M.S. bar bent to shape as per standard drawing.

each

142.95

Providing and fixing mild steel round holding down bolts with nuts and
washer plates complete.

kg

73.95

10.14.2.2 Fixing with carbon steel galvanised dash fastener of required

dia and size (to be paid for separately)
10.14.3 Profile E
10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb
10.14.3.2 Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)
Providing and fixing M.S. Tubular frames for doors, windows,
ventilators and cupboard with rectangular/ L-Type sections, made of
1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish,
with profiles of required size, including fixing of necessary butt hinges
and screws and applying a priming coat of approved steel primer.
10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse
sand
:
6
graded
stone
aggregate
20
mm
nominal
size)
10.15.2
Fixing with carbon steel galvanised dash fastener of required
dia and size (to be paid for separately)

10.16

10.17

10.18

10.19

Steel work in built up tubular ( round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.

10.20
98.25 10.21

Providing and fixing bolts including nuts and washers complete.

kg

Providing and fixing M.S. rivets of sizes in position.

kg
139.65

10.22

Welding by gas or electric plant including transportation of plant at site

etc. complete.
10.23

14.73. 10.24

Item Shifted to Sub head 14 as item

Item Shifted to Sub head 14 as
item 14.74.

10.25

Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

cm

2.85

primer using structural steel etc. as required.

10.25.1 In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete
SUB HEAD : 10 - STEEL WORK

kg

75.30

175

Code No.

Description

Unit

Rate `

kg

90.10

10.26.1 M.S. tube

kg

104.70

10.26.2 E.R.W. tubes

kg

129.15

10.26.3 G.I. pipes

kg

108.60

each
each
each
each
each

66.10
70.75
86.75
97.80
119.60

kg

619.40

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates

and similar works
10.26

10.27

10.28

10.29

10.30

Providing and fixing hand rail of approved size by welding etc. to

steel ladder railing, balcony railing, staircase railing and similar works,
including applying priming coat of approved steel primer.

Providing and fixing carbon steel galvanised ( minimum coating 5

micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield
strength 480 N/mm2), counter sunk head, comprising of 10 m dia
polyamide PA 6 grade sleeve, including drilling of hole in frame ,
concrete/ masonry, etc. as per direction of Engineer-in-charge.
10.27.1 10 x 60 mm
10.27.2 10 x 80 mm
10.27.3 10 x 120 mm
10.27.4 10 x 140 mm
10.27.5 10 x 160 mm
Providing and fixing stainless steel ( Grade 304) railing made of
Hollow tubes, channels, plates etc., including welding, grinding, buffing,
polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing
the railing with necessary accessories & stainless steel dash fasteners
, stainless steel bolts etc., of required size, on the top of the floor or the
side of waist slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of stainless
steel members shall be considered excluding fixing accessories such
as nuts, bolts, fasteners
etc.).
Providing & fixing fly proof wire gauze to windows, clerestory windows
& doors with M.S. Flat 15x3 mm and nuts & bolts complete.
10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm
aperture on both sides

sqm

538.30

10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides

sqm

Providing & fixing glass panes with putty and glazing clips in steel
doors, windows, clerestory windows, all complete with :
10.30.1 4.0 mm thick glass panes
10.30.2 5.5 mm thick glass panes

sqm
sqm

1277.60

764.45
988.00

176

SUB HEAD : 10 - STEEL WORK

SUB-HEAD : 11.0

FLOORING

177

178

BASIC RATES (11.0 FLOORING)

Code
No.

0002
0013
0100
0101
0103
0111
011
4
011
5
0123
0124
0126
0127
0130
0139
0295
0296
0297
0298
0313
0367
0368
0682
0784
0785

Unit

Rate `

Description

day

800.00

Hire charges of Concrete Mixer 0.25 to 0.40 cum with

day

350.00

Hopper Machine for rubbing of floors

day

363.00

Bandhani

day

363.00

Bhisti

day

399.00

Blacksmith 2nd class

day

435.00

Carpenter 1 st class

day

329.00

Beldar

day

329.00

Coolie

day

435.00

Mason (brick layer) 1 st class

day

399.00

Mason (brick layer) 2nd class

day

435.00

Mason (for ornamental stone work) 1 st class

day

435.00

Driver (for Road Roller, Concrete Mixer, Truck

day

435.00

etc.) Mistry

day

363.00

Skilled Beldar (for floor rubbing etc.)

cum

1175.00

Stone Aggregate (Single size) : 20 mm nominal size

cum

1175.00

Stone Aggregate (Single size) : 12.5 mm nominal

cum

1175.00

size

cum

1140.00

Stone Aggregate (Single size) : 10 mm nominal size

tonne

49600.0

Stone Aggregate (Single size) : 06 mm nominal size

tonne

Blown type petroleum bitumen of penetration 85/25 of approved

tonne

6300.00

100 Nos

14000.0

quality Portland Cement

White Cement

cum

0 80.00

Oxidised mild steel screws 50 mm

quintal

1000.00

Marble dust/ powder

quintal

220.00

kilogram

210.00

Marble chips up to 4 mm and down size White & black

Marble chips large size above 4 mm White & black

55.00

Black colour dark shade pigment

kilogram

0874

Red, chocolate, orange, buff or yellow (red oxide of iron) light

shade pigment

kilogram

75.00

0875

cum

70.00

Green or blue medium shade pigment

0788

0876
0982
0983
1007
1008
1149
1164
1165
1168

cum

1200.00

Coarse sand (zone III)

quintal

700.00

Fine sand (zone IV)

quintal

4636.00

Structural steel such as tees, angles channels and R.S. joists

metre

4200.00

Flats up to 10 mm in thickness

sqm

20.00

Glass strip 4 mm thick 40 mm deep

sqm

180.00

Red sand stone slab 40 mm thick (un-dressed)

sqm

200.00

White sand stone slab 40 mm thick (un-dressed)

Kota stone slab 20 mm to 25 mm thick (semi-polished)

300.00

SUB HEAD : 11 - FLOORING

179

Code
No.

118

2714
2715

Descripti
on

119

119

4
1201

1202

1203

1215

1227

1228
1229

1231

1240

a
k

1241
1242

1243

1244

1245

2201
2202

2203

2204
2205

2209

2211

2216

2261

2268

2500

2602

2708

2709
2710

S
e

2711

2712

2713

d
c
l
a
s
s
t
e
a
k
w
o
o
d
i
n
p
l
a
n
k
s
S
e
c
o
n
d
c
l
a
s
s
d

22 mm thick (light shade) Precast terrazzo tiles

Unit

Rate `

22 mm thick(medium shade) Precast terrazzo tiles

10 cudm

880.00

22 mm thick (dark shade)

10 cudm

750.00

Welding by electric plant

10 cudm

500.00

Chequered terrazzo tiles 22 mm thick(light shade)

sqm

350.00

Chequered terrazzo tiles 22 mm thick(medium

sqm

300.00

shade) Chequered terrazzo tiles 22 mm thick (dark

sqm

300.00

shade) Extra for selected planks of second class

cm

2.00

teakwood

sqm

275.00

18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5

sqm

300.00

sqm).

sqm

260.00

10 cudm

150.00

sqm

3600.0

kg

0 88.00

sqm

1200.0

Commercial LPG in cylinder

Glass mossaic tiles (20 mm x 20 mm x 4 mm ).

Tile fixing chemical adhesive

Cement Polymer Grout Compound

Acid for cleaning tiles

Carriage of bricks

kg

0 25.00

Carriage of stone aggregate below 40 mm nominal

kg

30.00

size Carriage of coarse sand

litre

18.00

Carriage of timber

1000 Nos

283.96

Carriage of steel

cum

106.49

Carriage of cement

cum

106.49

Carriage of tar / bitumen

cum

121.70

Carriage of stone blocks white & red sand stone & kota stone slab

tonne

94.65

Carriage of fine sand (1 part badarpur sand: 2 parts jamuna sand)

tonne

94.65

Carriage of marble dust and/or marble chips

tonne

106.49

Extra for selected planks of second class deodar wood

tonne

94.65

Common burnt clay F.P.S. (non modular) bricks class designation

cum

106.49

7.5 Truf Paver (500 x 500 x 40 mm)

cum

106.49

Ceremic Tiles Pieces for Crazy Flooring

10 cudm

110.00

White marble makrana second quality plain veined stone pieces

1000 Nos

4500.0

for crazy flooring

FS800H Grade Flooring Panel ( Size 600 mm x600 mm x32

mm) Zinc Electroplated Pedestals - 300 mm

Zinc Electroplated Pedestals - 450 mm

Zinc Electroplated Tube Stinger

each

Machine Screw for Fixing

each

172.00

each

750.00

each

140.00

each

136.25

sqm
quintal

0
1150.0
0

quintal

250.00

66.15

2.00

180

SUB HEAD : 11 - FLOORING

Code
No.

2750
2751
6001
6007
6010
6019
7024
7070
7071
7077
7236
7237
7254
7388
7801

Description

Unit

Rate `

8 mm thick granite stone tiles (mirror polished of all shades)

sqm

700.00

8 mm thick marble tiles (polished) Raj Nagar

sqm

400.00

White marble slab Makrana second quality plain veined 18 mm

sqm

2000.00

thick Pink marble slab plain 18 mm thick

sqm

800.00

Udaypur green marble slab plain 18 mm thick

sqm

800.00

Black Zebra marble slab plain 18 mm thick

sqm

500.00

Acid Proof cement

tonne

Chequered precast cement concrete tiles 22 mm thick using marble

8150.00

chips of size 6mm - Light shade using white cement

White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area

sqm

360.00

Acid and alkali resistant tiles 300x300 mm size, 10 mm thick

sqm

800.00

Precast chequered cement tiles 22 mm thick Dark shade using prdo-

10 Nos

nary cement

575.00

Precast chequered cement tiles 22 mm thick medium shade using

50% white cement 50% ordinary cement

sqm

235.00

Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt

sqm

540.00

Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and

litre

40.00

and designs of White, Ivory, grey, Fume Red brown etc.

each

50.00

sqm

300.00

sqm

400.00

sqm

450.00

sqm

500.00

sqm

1100.00

sqm

770.00

sqm

850.00

sqm

950.00

sqm

1600.00

kg

510.00

kg

20.00

L.S.

1.78

Hardening compound

7802

Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs
except White, Ivory, Grey, Fume Red Brown etc.

7803

Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in

all shades designs White, Ivory, Grey, Fume Red Brown etc.

7804

Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more

in all shades designs except White, Ivory, Grey, Fume Red Brown
etc.

7850

Agaria White marble slab plain 18 mm thick

8620

Vitrified floor tile 50x50 cm

8621

Vitrified floor tile 60x60 cm

8622

Vitrified floor tile 80x80 cm

8623

Vitrified floor tile 100x100 cm

8682

Epoxy Grout

8731

High polymer modified quickset tile adhesive per

9999

Sundries

SUB HEAD : 11 - FLOORING

181

11.0 FLOORING
Code No.

Description

11.1

Brick on edge flooring with bricks of class designation 7.5 on a bed of

12 mm cement mortar, including filling the joints with same mortar,
with common burnt clay non modular bricks:
11.1.1
1:4 (1 cement : 4 coarse sand)
11.1.2
1:6 (1cement : 6 coarse sand)
Dry brick on edge flooring in required pattern with bricks of class
designation 7.5 on a bed of 12 mm mud mortar, including filling joints
with Jamuna
sand, with common burnt clay non modular bricks.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate) finished with a floating coat of neat cement, including
cement slurry, but excluding the cost of nosing of steps etc. complete.
11.3.1
40 mm thick with 20 mm nominal size stone aggregate
52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12
mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix
: 2 graded stone aggregate 6 mm nominal size) by volume, hardening
compound mixed @ 2 litre per 50 kg of cement or as per manufacturers
specifications. This includes cost of cement slurry, but excluding the
cost
of nosing of steps etc. complete.
62 mm thick cement concrete flooring with concrete hardener topping,
under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) and top layer
12mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate, 6mm nominal size) by volume,
hardening compound mixed @ 2 litre per 50 kg of cement or as per
manufactures specifications. This includes cost of cement slurry, but
excluding the cost
of nosing of steps etc. complete.
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1
cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1
18 mm thick
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), including finishing complete.
Extra for making chequers of approved pattern on cement concrete floors,
steps, landing, pavements etc.

11.2

11.3

11.4

11.5

11.6

11.7
11.8

Unit

Rate `

sqm
sqm

672.00
630.10

sqm

498.95

sqm

353.35

sqm

535.25

sqm

588.90

sqm

377.25
5759.20

cum
33.25
sqm

TERRAZO FLOORING
11.9

40 mm thick marble chips flooring rubbed and polished to granolithic

finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and
top layer 6mm thick with white, black, chocolate, grey, yellow or green
marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by
volume, including cement slurry etc. complete :
11.9.1

Dark shade pigment with ordinary cement

11.9.2

Light shade pigment with white cement

182

sqm

584.25

sqm

627.05

SUB HEAD : 11 - FLOORING

Code No.

Description

Unit

Rate `

11.9.3

sqm
sqm
sqm
sqm

607.35
603.85
590.85
564.60

11.9.4
11.9.5
11.9.6
11.10

11.11

Medium shade pigment with 50% white cement and

50% ordinary cement
White cement without any pigment
Light shade pigment with ordinary cement
Ordinary cement without any pigment

40 mm thick marble chips flooring, rubbed and polished to granolithic

finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 9 mm thick with white, black, chocolate, grey, yellow or green
marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder : 7 marble chips) by
volume, including cement slurry etc. complete.
11.10.1
Dark shade pigment with Ordinary cement
11.10.2
601.10 Light shade pigment with white cement
11.10.3
Medium shade pigment with 50% white cement and 50% ordinary
11.10.4
cement
sqm
11.10.5
White cement without any pigment
11.10.6
631.35 Light shade pigment with ordinary cement
Ordinary cement without any pigment
sqm
40 mm thick marble chips flooring, rubbed and polished to granolithic
finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 12 mm thick with white, black, chocolate, grey yellow or green
marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by
volume, including cement slurry etc. complete :
11.11.
Dark shade pigment with ordinary cement
1
627.50 Light shade pigment with white cement
11.11.
2
Medium shade pigment with 50% white cement and 50% ordinary
cement
sqm
11.11.
3
White cement without any pigment
662.55 Light shade pigment with ordinary cement

634.20
sqm
sqm
607.70
574.10

sqm
sqm
713.10
673.60
sqm
sqm

11.11.4
11.11.5

sqm
sqm
662.20

640.65
Ordinary cement without any pigment

sqm

590.10

11.11.
6
11.12

Marble chips skirting up to 30 cm height, rubbed and polished to

granolithic finish, top layer 6 mm thick with white, black, chocolate,
grey, yellow or green marble chips of sizes from smallest to 4 mm
nominal size, laid in cement marble powder mix 3:1 (3 cement : 1
marble powder) by weight in proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume:
11.12.1

11.12.1.1 11.12.1.2

11.12.1.3 18 mm thick with under layer 12 mm thick in cement plaster

1:3 (1 cement : 3 coarse sand) :
Dark shade pigment with ordinary cement

sqm

806.55 Light shade pigment with white cement

sqm
849.35

Medium shade pigment with 50% white cement and 50%

ordinary cement

SUB HEAD : 11 - FLOORING

sqm

829.65

183

Code No.

11.13
11.14
11.15

11.16

11.17
11.18

11.19

Description

Unit

Rate `

11.12.1.4 White cement without any pigment

11.12.1.5 Light shade pigment with ordinary
11.12.1.6 cement
Ordinary cement without any pigment

sqm
826.10 sqm
813.15
sqm
787.75

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
11.13.1 40 mm wide and 4 mm thick
metre
50.05
Extra for laying terrazo flooring on staircase treads not exceeding 30 cm
in width, including cost of forming, nosing etc.
sqm
36.85
Crazy marble stone flooring, including filling the gaps with light shade
pigment with white cement marble powder mixture (3 parts of white
cement : 1 part of marble powder) by weight in proportion of 4:7 (4
cement marble powder mix : 7 white, black or white and black marble
chips of sizes from 1 mm to 4 mm nominal size by volume), with under
layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 12.5 mm nominal size), including rubbing,
polishing and cement slurry etc. complete :
11.15.1 18 mm thick crazy marble stone white, black or as specified
sqm
919.95
TILE FLOORING
Precast terrazo tiles 22 mm thick with graded marble chips of size
upto 12 mm, laid in floors, and landings, jointed with neat cement slurry
mixed with pigment to match the shade of the tiles, including rubbing
and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1
cement:4 coarse sand) :
11.16.1
Light shade pigment using white cement
sqm
1029.05
11.16.2
Medium shade pigment using 50% white cement and 50%
ordinary cement
sqm
943.70
11.16.3 Dark shade pigment using ordinary cement
sqm
918.65
11.16.4 Ordinary cement without any pigment
sqm
880.85
Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in
width.
sqm
46.00
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto
12 mm, in skirting and risers of steps not exceeding 30 cm in height, on
12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with
neat cement slurry mixed with pigment to match the shade of the tiles,
including rubbing and polishing complete with tiles of :
11.18.1
Light shade pigment using white cement
sqm
1316.15
11.18.2
Medium shades pigment using 50% white cement and 50%
ordinary cement
sqm
11.18.3 Dark shade pigment using ordinary cement
1220.05 sqm
11.18.4 Ordinary cement without any pigment
1182.50
sqm
1134.85
Chequered terrazo tiles 22 mm thick with graded marble chips of size
up to 6 mm in floors, jointed with neat cement slurry mixed with pigment
to match the shade of the tiles, including rubbing and polishing
complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse
sand) :
11.19.
2
1
11.19.

Light shade
pigment using
white cement

184

sqm
Medium shade pigment using 50% white cement, 50%
ordinary cement

933.25
sqm

943.70

SUB HEAD : 11 - FLOORING

Code No.

11.20

11.21

Description

Unit

Rate `

11.19.
Dark shade pigment using ordinary
3
cement
11.19.
Ordinary cement without any pigment
4
Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match
the shade of tiles, including rubbing and cleaning etc. complete, on 20
mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
11.20.1
Light shade pigment using white cement
11.20.2
Medium shade pigment using 50% white cement 50% Grey
cement

sqm
sqm

867.55
829.85

sqm

905.75

sqm

1112.50

11.20.3 Dark shade pigment using ordinary cement

11.20.4 Ordinary cement without any pigment
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of
approved make and colour using acid and/or alkali resisting mortar
bedding, and joints filled with acid and/or alkali resisting cement as per
IS : 4457, complete as per the direction of Engineer-in- Charge.
11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof
cement : 4 coarse sand)

sqm
sqm

695.95
658.15

11.21.1.1 Acid and alkali resistant tile

sqm

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof

cement : 4 coarse sand)
11.21.2.1 Acid and alkali resistant tile

1230.30

11.21.2

11.22

11.23

11.24
11.25

11.26

Tile work in skirting, risers of steps and dado up to 2 m height over 12

mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and
jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white
cement mixed with pigment of matching shade complete.
11.22.1 Marble tiles (polished) Raj Nagar
11.22.1 1 8 mm thick
STONE FLOORING
Marble stone flooring with 18 mm thick marble stone, as per sample of
marble approved by Engineer-in-charge, over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
jointed with grey cement slurry, including rubbing and polishing
complete with :
11.23.1 Makrana white second quality
11.23.2 Raj Nagar plain
11.23.3 Agaria White
11.23.4 Black Zebra
11.23.5 Udaipur green marble
11.23.6 Pink plain marble
Extra for pre finished nosing to treads of steps of marble stone.
Extra for marble stone flooring in treads of steps and risers using single
length up to 2.00 metre.
KOTA STONE FLOORING
Kota stone slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade
of the slab, including rubbing and polishing complete with base of

1293.00
sqm

sqm

sqm
sqm
sqm
sqm
sqm
sqm
metre
sqm

920.00

3360.45
1757.60
2158.30
1356.85
1757.60
1757.60
274.90
320.30

cement mortar 1 : 4 (1 cement : 4 coarse sand) :

11.26.1 25 mm thick
SUB HEAD : 11 - FLOORING

sqm

1141.40

185

Code
No.

11.27

11.28

11.29

11.30

11.31
11.32

Description

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3
coarse sand) and jointed with grey cement slurry mixed with pigment
to match
the shade of the slabs, including rubbing and polishing complete.
SAND STONE FLOORING
40 mm thick fine dressed stone flooring over 20 mm (average) thick
base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints
finished flush.
11.28.1 Red sand stone
11.28.2 White sand stone
40 mm thick fine dressed stone flooring over 20 mm (average) thick
base of cement mortar 1:5 (1 cement : 5 coarse sand), including
pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an
admixture of pigment to match the shade of stone.
11.29.1 Red sand stone
11.29.2 White sand stone
40 mm thick rubbed stone flooring over 20 mm (average) thick base
of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3 mm thick,
side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed
with pigment to match the shade of stone and pointing with same
mortar.
11.30.1 Red sand stone
11.30.2 White sand stone
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone
slab.
Extra for Kota stone/ sand stone in treads of steps and risers using single
length up to 1.05 metre.

Unit

Rate `

1191.25
sqm

sqm
sqm

582.80
608.35

sqm
sqm

686.45
712.00

sqm
sqm

752.65
778.20

metre

75.80

sqm

16.90

sqm
sqm

3332.85
2290.85
dados,
over
12 mm
thick
bed of
cemen
t
mortar
1:3 (1
cemen
t:3
coarse
sand)
and
jointin
g with
grey
cemen

WOODEN FLOORING
11.33

11.34

11.35

11.36

25 mm wooden planking, tongued and grooved in flooring, including

fixing with iron screws complete with :
11.33.1 Second class teak wood
11.33.2 Second class deodar wood
38 mm thick wood block flooring of first class teak wood laid over 25
mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 10 mm nominal size) to be paid
separately, coated with a thin layer of hot bitumen penetration 80/25
(blown type) @ 2.45 kg per sqm, including fixing blocks in position
after dipping in hot bitumen (blown type) up to half depth, planed,
levelled smooth and finished
complete.
Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs
of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum
three lugs to be provided), including necessary welding and applying a
priming
coat of approved primer on exposed surface etc. complete.
CERAMIC GLAZED TILES
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge, in skirting, risers of steps and

sqm

kg

t slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

sqm

7067.05

92.20

836.65

186

SUB HEAD : 11 - FLOORING

Code
No.

11.37

11.38

11.39

11.40

11.41

11.42

Description

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming
to IS : 15622 of approved make in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1
Cement : 4 Coarse sand), including pointing the joints with white cement
and matching
pigment etc, complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer), of 1st quality conforming
to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement
mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints
with white
cement and matching pigments etc., complete.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300
mm or more (thickness to be specified by the manufacturer), of 1st
quality conforming to IS : 15622, of approved make, in colours White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4
(1 Cement: 4 Coarse sand), including grouting the joints with white
cement and matching
pigments etc., complete.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300
mm or more (thickness to be specified by the manufacturer), of 1st
quality conforming to IS : 15622, of approved make, in all colours,
shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm
thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing
the joints with white
cement and matching pigments etc., complete.
VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS : 15622, of approved make, in all colours and
shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse
sand), including grouting the joints with white cement and matching
pigments etc., complete.
11.41.1 Size of Tile 500x500 mm
11.41.2 Size of Tile 600x600 mm
11.41.3 Size of Tile 800x800 mm
11.41.4 Size of Tile 1000x1000 mm
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse
sand) bedding in laying of floor tiles.

11.43
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high
polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477,
in average 3mm thickness.
11.44

Crazy ceramic tile flooring, with under layer 12 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm,
including filling the gaps with ordinary cement mixture & mixing with
synthetic polyester fibre, triangular in shape having specific gravity of
1.34 to 1.40, cross section size ranging from 10 to 40 micron & length
upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement
mortar, including providing and mixing water proofing material in mortar
@ 1 kg per 50 kg
of cement , all complete as per direction of Engineer-in-charge.

Unit

sqm

Rate `

785.40

904.45
sqm

950.05
sqm

1009.60

sqm

sqm
sqm
sqm
sqm

1310.70
1405.95
1522.85
2296.70

sqm

457.15

sqm

432.85

sqm

467.00

SUB HEAD : 11 - FLOORING

187

Code
No.

11.45

11.46

11.47

11.48

Description

Unit

Rate `

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on

150 mm thick sub grade of compacted bed of 20 mm thick nominal size
stone aggregate and base course and filling with 150 mm thick jamuna
sand, including spreading, well ramming, consolidating and finishing
smooth etc. all complete as per direction of Engineer-in-charge.

sqm

1831.15

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade, in
skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand), including grouting the joint with white cement
&
matching pigments etc. complete.
11.46.1

Size of Tile 500x500 mm

sqm

1320.15

11.46.2

Size of Tile 600x600 mm

sqm

1415.40

11.46.3

Size of Tile 800x800 mm

sqm

1534.45

11.46.4

Size of Tile 1000x1000 mm

sqm

2308.30

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by the manufacturer), with water absorption less than 0.08%
and conforming to IS: 15622, of approved brand & manufacturer, in all
colours and shade, in skirting, riser of steps, laid with cement based
high polymer modified quick set tile adhesive (water based) conforming
to IS: 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
11.47.1

Size of Tile 500x500 mm

sqm

1534.95

11.47.2

Size of Tile 600x600 mm

sqm

1630.20

11.47.3

Size of Tile 800x800 mm

sqm

1749.25

11.47.4

Size of Tile 1000x1000 mm

sqm

2523.10

Grouting the joints of flooring tiles having joints of 3 mm width,

using epoxy grout mix of 0.70 kg of organic coated filler of desired
shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling
/ grouting and finishing complete as per direction of Engineer-in-charge.
11.48.1

Size of Tile 500x500 mm

sqm

223.45

11.48.2

Size of Tile 600x600 mm

sqm

187.95

11.48.3

Size of Tile 800x800 mm

sqm

152.45

sqm

111.00

sqm
sqm
sqm
sqm

1471.45
1566.70
1685.75
2459.60

11.48.4
11.49

Size of Tile 1000x1000

mm
Providing and laying Vitrified tiles in floor with different sizes (thickness
to be specified by the manufacturer), with water absorption less than
0.08% and conforming to IS:15622 , of approved brand &
manufacturer, in all colours and shade, laid with cement based high
polymer modified quick set tile adhesive (water based) conforming to
IS : 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
11.49.1 Size of Tile 500x500 mm
11.49.2 Size of Tile 600x600 mm
11.49.3 Size of Tile 800x800 mm
11.49.4 Size of Tile 1000x1000 mm

188

SUB HEAD : 11 - FLOORING

Code
No.

11.50
11.51

11.52

11.53

11.54

Description

Unit

Deduct for not grouting the joints with white cement and matching pigment
in the items of fixing of vitrified tiles.
sqm
Providing and laying machine cut, mirror polished, Italian Marble stone
flooring laid in required pattern in linear portion of the building all
complete as per architectural drawings, with 18 mm thick stone slab laid
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm
including pointing with white cement slurry admixed with pigment to
match the marble shade including rubbing, curing and polishing etc. all
complete as specified and as directed by the Engineer-in-Charge. a. 18
mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or
Dark Emperadore
etc.
sqm
Providing and laying machine cut, mirror polished Marble stone flooring,
in required design (Simple geometrical, abstract etc.) and in patterns in
combination with Italian marble stones of different colours, shades and
finished surface texture etc., in linear portions of the building, all
complete as per the architectural drawings, with 18 mm thick stone
slab laid over 20 mm (average) thick base of cement mortar 1:4 (1
cement : 4 coarse sand) laid and jointed with white cement slurry @
4.4 kg/sqm including pointing with white cement slurry admixed with
pigment to match the marble shade including rubbing, curing and
polishing etc. all complete as specified and as directed by the Engineerin-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso
verona, Fire Red or Dark Emperadore
etc.

sqm

Providing and fixing Glass mossaic tiles at finished plain wall surface of
size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize
design as per direction of Engineer-in- Charge. The glass mosaic tiles
to be fixed on the wall surface with the help of approved adhesive
applied at the rate of 2.5 kg per sqm and grouting of the same. The rate
is inclusive of all operation, material and required pattern approved by
Engineer-inCharge:

sqm

Providing and fixing removable raised/false access flooring with system

and its components of approved make for different plenum height with
possible height adjustment upto 50 mm, comprising of modular load
bearing floor panels supported on G.I. rectangular stinger frame work
and G.I. Pedestal etc. all complete, as per the architectural drawings,
as specified and as directed by Engineer-in-charge consisting of :
a) P roviding at required spacing to form modular framework, pedestals
made out of GI tube of thickness minimum 2 mm and 25 mm outer
diameter, fully welded on to the G.I. Base plate of size 100mm x
100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal
head of size 75mmx75mmx3.5 mm welded with GI fully threaded
stud 16mm outer diameter with two GI Check nuts screwed on the stud
for level adjustment upto 50mm, locking and stabilizing the pedestal
head in position at the required level. The pedestals shall be fixed to
the subfloor (base) through base plate using epoxy based adhesive of
approved make or the machine screw with rawl plug.
b) S tringers system in all steel construction hot dipped galvanized of
rectangular size 570x20x30x0.80mm thick having holes at both ends for

securi
ng the
stringe
rs on
to the
pedest
al
head
using
fully
thread
ed
screw
s

Rate `

5520.40
8.50

5766.80

1752.60

SUB HEAD : 11 - FLOORING

189

Code No.

Description

Unit

Rate `

ensuring maximum lateral stability in all directions, the grid formed by

the pedestal and stringer assembly shall receive the floor panel, this
system shall provide adequate solid, rigid support for access floor panel,
the system shall provide a minimum clear uninterrupted clearance
between the bottom of the floor for electrical conduits and wiring etc. all
complete as per the architectural drawings, as specified and as
directed by the Engineer-in-charge.
c) P r oviding and fixing Access Floor panel of 600x600x32 mm medium
grade Filled Steel anti static high pressure Lamination of 800H grade
(FS800H). Access Floor panel shall be steel welded construction with
an enclosed bottom pan with uniform pattern of 64 hemispherical
cones. The top and bottom plates of Steel Gauges: top 0.6 mm and
bottom 0.7 mm fused spot welded together (minimum 64 welds in each
dome and 20 welds along each flange). The panel should be
Corroresist epoxy coated for lifetime rust protection and cavity formed
by the top and bottom plate is filled with Pyrogrip noncombustible
Portland cementitious core mixed with lightweight foaming compound.
The access floor shall be factory finished with Anti-static High
Pressure laminate with Non Warp technology upto 1mm thickness for
superior adhesion and Surface flatness within 0.75mm.The panel is to
withstand a Concentrated Load of 363 kgs applied on area 25mm x
25mm without collapse in the centre of the panel which is placed on
four steel blocks. The panel will withstand and Uniformly Distributed
Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all
complete as per the approved manufacturers specification and as per
the direction of Engineer-in-charge. All specification must be printed on
the side of the panel to ensure the quality of the product.
11.54.1

300 mm Finished Floor Height (FFH)

sqm

3999.55

11.54.2

450 mm Finished Floor Height (FFH).

sqm

3983.85

190

SUB HEAD : 11 - FLOORING

SUB-HEAD : 12.0

ROOFING

191

192

0231
Code
No.

BA
SIC
RA
TE
S
(12.
0
RO
OFI
NG
)

0232

0013
0100
0101
0102
0103
0111
011
2

Description

011

011

011

011

7
0122

0123

0124

0128
0130

0131

0139

0222

0223

i
n

0224

0225

0226
0227
0228
0229

f
f
l
o
o
r
s

0230
B

2nd class Carpenter

Unit

Rate `

2nd class Beldar

day

350.00

Coolie

day

363.00

Fitter (grade 1)

day

363.00

Assistant Fitter or 2nd class Fitter

day

435.00

Mason (for plaster of paris work) 1st class

day

399.00

Bhisti

Mason (brick layer) 1st class

day

435.00

Mason (brick layer) 2nd class

day

399.00

Mate

day

329.00

Mistry

day

329.00

Painter

day

435.00

Skilled Beldar (for floor rubbing etc.)

day

399.00

Seam bolts and nuts 6 mm dia and 25 mm long

day

435.00

Fibre (high impact poly propelene reinforced)

cement corrugated sheet 6 mm thick

day

435.00

day

399.00

Fibre (high impact poly propelene reinforced) cement

close fitting adjustable ridge

day

363.00

day

435.00

Fibre (high impact poly propelene reinforced) cement

corrugate serrated adjustable ridge

day

399.00

day

363.00

1 st class Carpenter

i
t
h
1
s

Fibre (high impact poly propelene reinforced) cement

plain wing adjustable ridge

Fibre (high impact poly propelene reinforced) cement

unserrated adjustable ridge for hips

Fibre (high impact poly propelene reinforced) cement

corrugated apron piece

l
a
s

Fibre (high impact poly propelene reinforced) cement

eaves filler piece

Fibre (high impact poly propelene reinforced) cement

north light curves

Fibre (high impact poly propelene reinforced)

cement ventilator curves

l
a

Fibre (high impact poly propelene reinforced)

cement barge boards 6 mm thick

10 Nos
40.00
sqm

250.00

metre

210.00

metre

210.00

metre

210.00

metre

300.00

metre

225.00

each

175.00

metre

310.00

each

418.00

metre

418.00

c
k
s
m
i
t
h

SUB HEAD : 12 - ROOFING

193

Code
No.

Description

Unit

Rate `

0233

Fibre (high impact poly propelene reinforced)

cement ridge finial

pair

165.00

0234

Fibre (high impact poly propelene reinforced)

cement special north light curves

each

560.00

0235

Fibre (high impact poly propelene reinforced) cement

S type louvers

each

260.00

0236

Fibre (high impact poly propelene reinforced)

cement board 6 mm thick

sqm

210.00

Stone Aggregate (Single size) : 20 mm nominal size

cum

1175.00

Stone Aggregate (Single size) : 10 mm nominal size

cum

1175.00

Bhusa

quintal

500.00

Paving bitumen of grade VG-10 of approved quality

tonne

50600.00

0295
0297
0308
0309
0314
0328
0332
0336
0341
0367
0368
0370
0452
0637
0765
0771
0811
0845
0865
0869
0870

Bitumen hot sealing compound : grade A

kilogram

28.00

White face insulating board:12 mm thick

sqm

360.00

Natural colour insulating board:12 mm thick

sqm

280.00

Flame retardant face insulating board: 12 mm thick

sqm

320.00

Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm

thick

sqm

330.00

Portland Cement

tonne

6300.00

White Cement

tonne

14000.00

Coal (steam)

quintal

400.00

Brass screws 25 mm

100 Nos

100.00

Bright finished or black enameled mild steel screws 40 mm

100 Nos

52.00

Hessian cloth

sqm

45.00

Kerosene oil

litre

48.00

Mud (dry)

cum

65.00

Roofing paint for iron sheets in red

litre

130.00

colour Pig lead

kilogram

120.00

Plaster of Paris

kilogram

4.50

each

12.00

kilogram

75.00

Plug

0875

Red, chocolate, orange, buff or yellow (red oxide of iron) light

shade pigment

0886

Standard holder bat clamps for sand cast iron or cast iron
pipes 150 mm dia

each

30.00

Sand Cast iron plain shoe 150 mm dia

0966

each

310.00

Coarse sand (zone III)

0982

cum

1200.00

Galvanised steel plain sheets

0992

quintal

5350.00

Standard quality hard board sheet 3 mm thick

0994

sqm

125.00

Standard quality hard board sheet 4.5 mm thick

sqm

150.00

0996

194

SUB HEAD : 12 - ROOFING

Code
No.

1001
1008
1015
1022
1023
1024
1025
1031
1032
1174
1175
1190
1196
1204
1207
1208
1209
1210
1211
1213
1219
1220
1331
1984
2202
2203
2204
2205
2207
2209
2211
2216
2273
2302
2308

Description

Unit

Spun yarn

kilogram

Flats up to 10 mm in thickness

Rate `

40.00

quintal

4200.00

sqm

300.00

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round

head with slots

10 Nos

25.00

Galvanised steel J or L hooks 8 mm dia

10 Nos

120.00

each

12.00

10 Nos

30.00

Galvanised steel bolts & nuts 10 mm dia and 27 cm long both

sides threaded with 4 galvanised steel nuts

each

25.00

Galvanised steel bolts 10 mm dia and 7 cm long with nuts

each

20.00

Red sand stone slab 45 mm to 50 mm thick (un-dressed)

sqm

175.00

White sand stone slab 45 mm to 50 mm thick (un-dressed)

sqm

220.00

Second class teak wood in planks

10 cudm

750.00

First class kail wood in planks

10 cudm

310.00

sqm

467.00

Mild steel expanded metal 20x60 mm strands

Galvanised steel bolts & nuts 10 mm dia and 125 mm long round
head with slots
Mild steel bolts 6 mm dia and 25 mm long with hexagonal head

Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm

thick
G.I. Limpet washer

100 Nos

35.00

Bitumen washer

100 Nos

30.00

G.I. plain washer thick

100 Nos

35.00

G.I. plain washer thin

100 Nos

32.00

G.I. plain washer for seam bolts

100 Nos

30.00

Water proofing materials

kilogram

35.00

Wire nails

kilogram

65.00

Wire mesh (rabbit)

sqm

45.00

M.S.Holder bat clamp of approved design for 100 mm S.C.I.

each

20.00

1000 Nos

5200.00

Carriage of stone aggregate below 40 mm nominal size

cum

106.49

Carriage of coarse sand

cum

106.49

Carriage of timber

cum

121.70

Carriage of steel

tonne

94.65

1000 Nos

170.38

Carriage of cement

tonne

94.65

Carriage of tar / bitumen

tonne

106.49

Carriage of stone blocks white & red sand stone & kota stone slab

tonne

94.65

Carriage of A.C.sheet and accessories

tonne

94.65

Carriage of G.I.sheet and accessories

tonne

94.65

Carriage of plaster of paris

tonne

94.65

pipe Common burnt clay F.P.S. bricks tile class designation 10

Carriage of brick tiles

SUB HEAD : 12 - ROOFING

195

Code
No.

3002
3004
3050
4009
4202
7009
7010
7011
7012
7013
7014
7015
7016
7017
7018
7019
7020
7021
7028
7030
7031
7050
7051
7052
7053
7090
7091
7187
7188

Description

Polyvinyle chloride sheet 400 micron thick

Stone ware spouts 100 mm dia 60 cm
long Galvanised steel corrugated sheets
Mild steel tubes hot finished welded type
Red oxide Zinc chromate primer
12.5 mm thick tapered edge gypsum plain borad

Unit

sqm each
quintal
kilogram litre
sqm metre
metre metre
metre

Galvanised Steel celling section (size 80x26x0.50

mm)
Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm)
Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm)
Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50

each each
kilogram
kilogram roll
each 100 Nos

mm)

litre sqm

Galvanised Steel connecting clips (2.64 mm dia and 230 mm

long GI wire)

sqm sqm

Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)

sqm sqm

Joint filler

sqm sqm

Joint finisher

sqm sqm

each

Joint tape roll

Dash fastener / Chemical fastner
All drive screws ( for gypsum board)
Primer ( for gypsum board)
12.5 mm thick Fully Perforated gypsum board

metre
metre
each

12.5 mm thick tapered edge gypsum fire resistant board

12.5 mm thick tapered edge gypsum moisture resistant board

each each

PU Primer

each

40 mm (average) PU spray having 40-45 kg/m3 density

GI wire netting 3/4" x 24 G
400 G polythene sheet
Expanded polystyrene type N- Normal
Expanded polystyrene type - SE
C.I. grating 150 mm dia, weighing not less than 440 gm

7189

uPVC pipes (working pressure 4 kg / cm 2 ) Single socketed pipe

75 mm dia

7190

uPVC pipes (working pressure 4 kg / cm 2 ) Single socketed pipe

110 mm dia

7191

uPVC pipes (working pressure 4 kg / cm 2 ) Rubber (Seal)

Ring 75 mm dia

7192

uPVC pipes (working pressure 4 kg / cm 2 ) Rubber (Seal)

Ring 110 mm dia

7193

UPVC
coupler
for
UPVC
drainage
pipes
110 mm

UPVC coupler for UPVC drainage pipes 75 mm

Rate `

0 40.00 5800.00 55.00 70.00 160.00 72.00 43.00 72.00 23.00

4
0.

4.50 3.50 27.00 24.00 135.00 15.00 60.00 73.00 430.00

255.00 285.00 41.00 421.00 27.00 15.00 140.00 170.00

28.00

196

18.00
72.00
20.00
135.00

36.00
55.00

SUB HEAD : 12 - ROOFING

Code
No.

7194
7195
7196
7197
7198
7199
7208
7209
7212
7213
7214
7215
7231
7232
7238
7266
7267
7268
7273
7385
7386
7388
7857
7904
8589
8590
8591
8592
8593
8594
8595
8597

Description

Unit

UPVC pushfit coupler (single) 75 mm thick

each

52.00

UPVC pushfit coupler (single) 110 mm thick

each

85.00

UPVC single equal Tee (without door) 75x75x75 mm

each

95.00

UPVC single equal Tee (without door) 110x110x110

each

130.00

mm UPVC single equal Tee (with door) 75x75x75 mm

each

118.00

UPVC single equal Tee (with door) 110x110x110 mm

each

180.00

uPVC bend 87.5 75 mm bend

each

58.00

uPVC bend 87.5 110 mm

each

95.00

bend UPVC plain shoe 75 mm

each

105.00

bend UPVC plain shoe 110 mm

each

210.00

bend UPVC pipe clip 75 mm

each

16.00

bend UPVC pipe clip 110 mm

each

30.00

bend

sqm

145.00

Resin Bonded Glass wool 16 kg/ m3: 50 mm thick

sqm

204.00

Resin Bonded Glass wool 24 kg/ m3: 50 mm thick

kg

250.00

High Albedo paint

1000 Nos

Pressed clay tiles 20mm thick 250x250 mm size

Rate `

12150.0
0

each

Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin

bonded) (600x600x12 mm)

each

120.00

Semi perforated ceiling tiles (600x600x12 mm)

sqm

120.00

Resin Bonded Rockwool 48 kg/m3

sqm

211.00

3 mm thick translucent white acrylic plastic sheet

sqm

570.00

12 mm thick particle board ceiling tile

each

260.00

Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt

each

50.00
77.00

P.T.M.T. Grating square slit 150 mm

Machine moulded common burnt clay tile bricks of class designation
12.5

1000 Nos

Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm

thick

sqm

Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm (3

metre long)

each

Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm

(3.00 metre long)

each

Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33

mm (1.2 metre long)

each

Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33

mm ( 0.6 metre long)

each
each

40.00

Galvanised Steel soffit cleat size 25x35x1.60 mm

each

4.00

5250.00
860.00
195.00
125.00
80.00

Wooden screws with plastic rawl plugs 35x8 mm

GI Metal Tile Clip in Plain Beveled edge global white colour tiles of
size 600x600 mm and 0.5 mm thick

1.00
sqm
895.00

SUB HEAD : 12 - ROOFING

197

Code
No.

8598
8599
8600
8601
8602

Description

Unit

Rate `

sqm

1000.00

sqm

810.00

sqm

910.00

mm and 12.5 mm thick

sqm

470.00

Gypsum Tiles Fully Perforated Square edge of Size 595x595

mm and 12.5 mm thick

sqm

485.00

GI Metal Tile Clip in Perforated Beveled edge global white colour

tiles of size 600x600 mm and 0.5 mm thick
GI Metal Tile Lay-in Plain Tegular edge global white color tiles
of Size 595x595 mm and 0.5 mm thick
GI Metal Tile Lay-in Perforated Tegular edge global white color
tiles of Size 595x595 mm and 0.5 mm thick
PVC Laminated Gypsum Tiles (Square edge) of Size 595x595

Spring T-section 24x34x0.45 mm (3.00 meter long)

8604
8605
8606
8607
8608
8609
8610
8611
8612
8613
8614
8615
8616
8617
8618
8667
8668
8669
8670
8671
8672
8673
8674
8675
8676
8677
8699
8784
9999

metre

C Wall angle section 20x30x20x0.50 mm (3.00 meter long)

180.00 metre

Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)

155.00 metre

Spring T-connector

165.00 each

C Carrier Connector

5.00 each

C Suspension Clip

11.00 each

Wire Coupling Clip

11.00 each

Main T ceiling sections 24x38x0.3 mm (3 metre long)

9.00 each

Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long)

190.00 each

Intermediate cross T-Section 24x25x0.3 mm (1.2 m long)

120.00 each

Intermediate cross T-Section 24x25x0.3 mm (0.6 m long)

75.00 each

Hanger rod 4 mm thick

35.00 each

Adjustment clip 85x30x0.8 mm

8.00 each

Soffit cleat (Size 27x37x25x1.60 mm)

6.00 each

Dash fastener 6 mm dia 50 mm long

4.00 each

UV stabilised 2 mm thick plain FRP sheet

11.00 sqm

UV stabilised 2 mm thick corrugated FRP sheet

470.00 sqm

Mangalore ridge tiles 20 mm thick

540.00 each

Mangalore tiles 20 mm thick

30.00 each

Precoated galvanised iron profile sheet 0.50 mm

12.00 sqm

TCT Precoated galvanised steel plain ridges

435.00 metre

Precoated galvanised steel flashings/aprons

440.00 metre

Precoated galvanised steel gutter

440.00 metre

Precoated galvanised steel north light

455.00 metre

curves Precoated galvanised steel barge

455.00 metre

board Precoated galvanised steel crimp

450.00 sqm

curve

475.00 sqm

8 mm thick tapered edge calcium silicate board

250.00 sqm
690.00

8 mm thick Calcium silicate perforated tiles of size 595 x595 mm

Sundries

L.S.

1.78

198

SUB HEAD : 12 - ROOFING

12.0 ROOFING
Code No.

Description

12.1

Providing corrugated G.S. sheet roofing including vertical / curved

surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm
diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead, including a coat of approved steel primer
and two coats of approved paint on overlapping of sheets complete (up
to any pitch in horizontal/ vertical or curved surfaces), excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.

Unit

Rate `

12.1.1

1.00 mm thick with zinc coating not less than 275 gm/m

sqm

12.1.2

0.80 mm thick with zinc coating not less than 275 gm/m

1030.50 sqm

12.1.3

0.63 mm thick with zinc coating not less than 275 gm/ m

875.45
sqm

12.2

743.45

Extra for straight cutting in C.G.S. sheet roofing for making opening
of area exceeding 40 sq. decimeter for chimney stacks, sky light etc. :
12.2.1

1.00 mm thick

metre

12.2.2

0.80 mm thick

44.35 metre

12.2.3

0.63 mm thick

35.50
metre

12.3

12.4

12.5

Extra for circular cutting in C.G.S. sheet roofing for making opening
of area exceeding 40 sq. decimeter :
12.3.1

1.00 mm thick

metre

12.3.2

0.80 mm thick

252.95 metre

12.3.3

0.63 mm thick

202.00
202.00

12.4.1

0.80 mm thick with zinc coating not less than 275 gm/m

metre

568.90

12.4.2

0.63 mm thick with zinc coating not less than 275 gm/m

metre

502.75

metre

1050.60

metre

436.05

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed

with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I.
limpet and bitumen washers complete :
1.60 mm thick with zinc coating not less than 350 gm/m

Providing and fixing of 40 cm overall width plain G.S. sheet fixed

with polymer coated J, or L hooks, bolts and nuts, G.I. limpet and
bitumen washer complete, bent to shape and fixed in wall with cement
mortar 1:3 (1cement : 3 coarse sand).
12.6.1

12.7

metre
Providing ridges or hips of width 60 cm overall width plain G.S.
sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm
dia G.I. limpet and bitumen washers complete.

12.5.1
12.6

35.50

1.00 mm thick with zinc coating not less than 275 gm/m

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain

G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and
washers etc., including making necessary connections with rain
water pipes complete.
12.7.1

0.80 mm thick with zinc coating not less than 275 gm/m

metre

534.60

12.7.2

0.63 mm thick with zinc coating not less than 275 gm/m

metre

479.50

SUB HEAD : 12 - ROOFING

199

Code
No.

Unit

Rate `

Providing high impact Polypropylene reinforced cement 6 mm thick

corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing
with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I.
plain and bitumen washers or with self drilling fastener and EPDM
washers etc. complete (excluding the cost of purlins, rafters and
trusses), including
cutting sheets to size and shape wherever required.

sqm

396.10

Extra for straight cutting in polypropylene reinforced cement corrugated,

semi-corrugated 6 mm thick sheet roofing for making openings
of area exceeding 40 square decimeter for chimney stacks, skylights etc.

metre

35.50

Extra for circular cutting in polypropylene reinforced cement corrugated/

semi-corrugated 6 mm thick sheet roofing for making openings
of area exceeding 40 square decimeter.

metre

98.05

12.11

Extra for providing and fixing wind ties of 40x 6 mm flat iron section.

metre

113.75

12.12

Providing and fixing ridges and hips in fibre cement high impact
polypropylene reinforced roofing with suitable fixing accessories or self
drilling fastener and EPDM washer etc. complete.

12.8

12.9

12.10

Description

SHEET ROOFING

12.12.1

Corrugated serrated adjustable ridges

metre

343.10

12.12.2

Plain wing adjustable ridges

metre

343.10

12.12.3

Close fitting adjustable ridges

metre

389.80

12.12.4

Unserrated adjustable hips

metre

468.35

ACCESSORIES
12.13

12.14
12.15

Providing and fixing fibre cement high impact polypropylene

reinforced roofing accessories in all colours with polymer coated J or L
hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and
bitumen washers or with self drilling fastener and EPDM washer etc.
complete:
12.13.1

Corrugated apron pieces

12.13.2

Eaves filler pieces

328.65 metre

12.13.3

North light curves

235.65 metre

12.13.4

Ventilator curves

439.35 metre

12.13.5

Barge boards

571.85 metre

12.13.6

Ridge finials

12.13.7

Special north light curves

12.13.8

S type louvers

Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and
washers etc. for fixing asbestos cement / G.S. sheets gutters with purlins.

552.65 pair
223.55 each
742.60
metre

334.35

metre

52.30

sqm

141.90

Painting top of roofs with bitumen of approved quality @ 17kg per 10

sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm,
including cleaning the slab surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil complete :
12.15.1

12.16

metre

With residual type petroleum bitumen of grade VG - 10

10 cm thick (average) mud phaska of damped brick earth on roofs laid

to slope consolidated and plastered with 25 mm thick mud mortar mixed
with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1

clay : 1 cow dung) and covered with flat tile bricks, grouted with cement
mortar 1:3

200

SUB HEAD : 12 - ROOFING

Code No.

Description

Unit

Rate `

sqm

551.00

sqm

553.20

sqm

10.90

(1 cement : 3 fine sand) mixed with 2% of integral water proofing

compound by weight of cement and finished neat :
12.16.1
12.17

With common burnt clay F.P.S.(non modular) brick tile of class

designation 10

10cm thick (average) mud phaska of damped brick earth on roofs laid
to slope consolidated and plastered with 25 mm thick mud mortar with
bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1
clay : 1 cow-dung) and covered with machine moulded tile bricks,
grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with
2% of integral water proofing compound by weight of cement and
finished neat.
12.17.1
With machine moulded common burnt clay F.P.S.
(non modular) brick tiles of class designation 12.5, conforming to
IS 2690

12.18

Extra for every additional 1 cm thickness of mud phaska.

12.19

Providing and laying brick tiles over mumty roofs, grouted with cement
mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water
proofing compound by weight of cement, over 12 mm layer of cement
mortar 1:3 (1 cement : 3 fine sand) and finished neat :

12.19.1

With common burnt clay F.P.S. (non modular) brick tiles of class designation 10

sqm

420.50

Providing and laying pressed clay tiles (as per approved pattern 20 mm
nominal thickness of approved size) on roofs jointed with cement mortar
1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing
compound, laid over a bed of 20 mm thick cement mortar 1:4 (1
cement :
4 coarse sand) and finished neat complete.

sqm

487.85

metre

143.10

each

186.65

sqm

470.45

sqm

527.95

12.20

12.21

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge), including
finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design :
12.21.1
12.22

12.23

In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400
micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement, rounding the edges and making and
finishing the outlet complete.
Providing sand stone slab for roofing and laying them in cement mortar
1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens
or structural steel sections (Karries or battens or structural steel sections
to be paid separately), including pointing the ceiling joints with cement
mortar 1:3 (1 cement : 3 fine sand ) complete :
12.23.1

Red sand stone slab

12.23.1.1 40 to 50 mm thick
12.23.2

White sand stone slab

12.23.2.1 40 to 50 mm thick

SUB HEAD : 12 - ROOFING

201

Code
No.

12.24

Description

12.24.2

582.50

sqm

684.75

sqm

633.65

sqm

645.85

sqm

492.55

metre

400.35

metre

215.15

metre

227.85

metre

221.50

Natural colour insulating board

White face insulating board

12.24.2.1 12 mm thick
12.24.3

Flame retardant face insulating board

12.24.3.1 12 mm thick
Providing and fixing flat pressed 3 layer medium density particle board
or graded particle board (Grade I) IS: 3087 marked, in ceiling with
necessary nails etc. complete (frame work to be paid separately) :
12.25.1

12 mm thick

Providing and fixing plain Multipurpose Cement board ( High

Pressure steam cured ) as per IS : 14862, with suitable screws for
fibre cement board in ceiling etc. complete (frame work to be paid
separately) :
12.26.1

12.27

sqm

Providing and fixing insulating board ceiling of approved quality with

necessary nails etc. complete (frame work to be paid separately) :
12.24.1.1 12 mm thick

12.26

Rate `

CEILING

12.24.1

12.25

Unit

6 mm thick cement board

Extra for Circular cutting including wastages in ceiling with:

12.27.1

2nd class teak wood planks 20 mm thick

12.27.2

Natural colour insulating board

12.27.2.1 12 mm thick
12.27.3

White face insulating board:

12.27.3.1 12 mm thick
12.27.4

Flame retardant face insulating board:

12.27.4.1 12 mm thick
12.27.5

Standard quality hard board sheet:

12.27.5.1 3 mm thick

metre

190.40 12.27.5.2 4.5 mm thick

metre
194.40

12.28

Extra for providing and fixing ceiling to curved surfaces in narrow widths

sqm

173.30

12.29

Providing and fixing false ceiling with 12 mm thick plain/ semi

perforated or with design ceiling tiles of BWP type phenol
formaldehyde synthetic resin bonded pressed particle board conforming
to IS:3087, finished with a coat of aluminium primer on both sides &
edges, including two coats of synthetic enamel paint of approved
quality on exposed face, fixed to a grid made out of anodised
aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm
size main runners, cross runners 23.5x19x1.5 mm fixed to main
runners placed 600 mm centre to centre both ways so as to form a grid
of 600 mm square. The frame work shall be suspended from ceiling by
level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means
of ceiling cleats and dash fastener. The suspenders shall be placed 600
x 1200 mm centre to centre including fixing to the frame with C.P brass
screws and applying a priming coat of zinc chromate yellow
primer (aluminium frame work shall be paid separately).

sqm

650.15

202

SUB HEAD : 12 - ROOFING

Code
No.

12.30

12.31

12.32

Description

Unit

Rate `

Extra for providing 3 mm thick translucent white acrylic plastic sheets of

approved quality in false ceiling instead of 12 mm thick plain or design
particle board ceiling tiles.

sqm

360.05

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to

a height of 5 m above floor level, over first class kail wood strips 25x6
mm with 10 mm gap in between and reinforced with rabbit wire mesh
fixed to wooden frame (frame work to be paid separately) :
12.31.1

Flat surfaces

sqm

828.45

12.31.2

Curved
surfaces

sqm

961.55

sqm

249.45

sqm per
metre height

102.10

Extra for sunk or raised mouldings in the plaster of Paris (Gypsum

anhydrous) ceiling.

12.33

Extra for providing plaster of Paris (Gypsum anhydrous) ceiling

above 5 metres height from floor level.

12.34

Providing fixing thermal insulation of ceiling (under deck insulation) with

Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg /
m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to
ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of
12.5 mm x
24 gauge wire mesh, for top most ceiling of building.

sqm

481.65

Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183. Density 16 kg/m3 , 50 mm thick, wrapped
in 200G Virgin Polythene bags placed over existing false ceiling and
held in
position by criss-crossing GI wire.

sqm.

240.40

12.35

12.36
Thermal Insulation of roofing with Expanded polystyrene fixed with
suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge:
12.36.1

With Type N - Normal 50 mm thick

sqm

226.75

12.36.2

With Type SE - Self Extinguishing type 50 mm thick

sqm

265.05

each

87.00

each

152.90

each

164.55

RAIN WATER SPOUT AND PIPE

12.37

Providing and fixing 100 mm diameter and 60 cm long rain water spout
in cement mortar 1:4 (1 cement : 4 fine sand).
12.37.1

12.38

Stone ware spout

Providing and fixing M.S. holder bat clamps of approved design to C.I.
or S.C.I. rain water pipes embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) and cost of cutting holes
and making good the walls etc. :
12.38.1
12.38.2

100 mm
diameter
150 mm
diameter

12.39

12.40

Providing lead caulked joints to sand cast iron rain water pipes and fittings:
12.39.1

100 mm dia Pipe

each

276.60

12.39.2

150 mm dia Pipe

each

382.60

Providing, fixing and embedding sand cast iron accessories for rain
water pipes in the masonry surrounded with 12 mm thick cement mortar

of the same mix, as that of masonry (lead caulking will be paid for
separately) :
12.40.1

Sand cast iron plain shoes :

12.40.1.1 150 mm diameter

SUB HEAD : 12 - ROOFING

each

396.35

203

Code
No.

12.41

12.42

Description

12.41.1

75 mm diameter

metre

145.70

12.41.2

110 mm diameter

metre

231.65

12.42.1.1 75 mm

each

108.65

12.42.1.2 110 mm

each

138.30

12.42.2.1 75 mm

each

127.20

12.42.2.2 110 mm

each

173.15

12.42.3.1 75x75x75 mm

each

222.00

12.42.3.2 110x110x110
mm

each

306.60

12.42.4.1 75x75x75 mm

each

195.30

12.42.4.2 110x110x110
mm

each

248.55

12.42.5.1 75 mm bend

each

113.25

12.42.5.2 110 mm bend

each

161.55

12.42.6.1 75 mm Shoe

each

167.85

12.42.6.2 110 mm Shoe

each

295.10

Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

12.42.2

12.42.3

12.42.4

12.42.5

12.42.6

12.44

Coupler

Single pushfit Coupler

Single tee with door

Single tee without door

Bend 87.5

Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips of approved design

to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length, including
cutting brick work and fixing in cement mortar 1:4 (1 cement : 4
coarse sand) and making good the wall etc. complete.
12.43.1

75 mm

each

172.80

12.43.2

110 mm

each

189.05

each

41.10

Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diameter and weighing not less than 440 grams.

12.45

Rate `

Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed pipes.

12.42.1

12.43

Unit

Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from M.S.
sheets and galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm
wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm
centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with

204

SUB HEAD : 12 - ROOFING

Code No.

Description

Unit

Rate `

6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels
45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to
which the ceiling section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm
centre to centre, shall be fixed in a direction perpendicular to G.I.
intermediate channel with connecting clips made out of 2.64 mm dia x
230 mm long G.I. wire at every junction, including fixing perimeter
channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm
long, the perimeter of ceiling fixed to wall/partition with the help of rawl
plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25 mm
at 230 mm c/c, including jointing and finishing to a flush finish of tapered
and square edges of the board with recomme-nded jointing compound ,
jointing tapes , finishing with jointing compound in 3 layers covering
upto 150 mm on both sides of joint and two coats of primer suitable for
board, all as per manufacturers specification and also including the cost
of making openings for light fittings, grills, diffusers, cutouts made with
frame of perimeter channels suitably fixed, all complete as per
drawings, specification and direction of the Engineer in Charge but
excluding the cost of painting with :
12.45.1
12.45.2

12.5 mm thick tapered edge gypsum plain board conforming

to IS: 2095- Part I

907.10
sqm
1022.95

12.5 mm thick tapered edge gypsum fire resistant board

conforming to IS: 2095- Part I

sqm

12.45.3

12.5 mm thick tapered edge gypsum moisture resistant board

sqm

12.45.4

Fully Perforated Gypsum Plaster Board of size 1200 x

2400x12.5 mm having approx. 15 % perforated area with
perforation size and pattern as approved by the Engineerincharge and as per manufacturers specification, with all 4
side tapered and backed by acoustical tissue with NRC value
not
less than 0.60

1059.50

1236.35
sqm

12.46
Providing and fixing to the inlet mouth of rain water pipe PTMT
(an Engineering Thermoplastic) grating square (Slit) 150 mm square with a
height of 8 mm and weighing not less than 100 gms.
12.47

each

98.05

Providing & fixing UV stabilised fiberglass reinforced plastic sheet

roofing up to any pitch, including fixing with polymer coated J or L
hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but
excluding the cost of purlins, rafters, trusses etc. The sheets shall be
manufactured out of 2400 TEX panel rovigs incorporating minimum
0.3% ultra-violet stabiliser in resin system under approximately 2400 psi
and hot cured. They shall be of uniform pigmentation and thickness
without air pockets and shall conform to IS 10192 and IS 12866.The
sheets shall be opaque or translucent, clear or pigmented, textured or
smooth as specified.
12.47.1

12.47.2

2 mm thick corrugated
(2.5" or 4.2" or 6") or

step-down (2" or 3"

2 mm thick flat

or 6" ) as specified
SUB HEAD : 12 - ROOFING

sqm

975.90

sqm

869.95

205

Code
No.

12.48

12.49

12.50

12.51

Description

Unit

Rate `

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm

nominal thickness and of approved size and as per approved pattern on
steel frame work complete (steel frame work to be paid separately).

sqm

303.65

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of
20mm thickness and of approved pattern on steel frame work complete
(steel
frame work to be paid separately).

sqm

135.65

Providing and fixing precoated galvanised iron profile sheets (size,

shape and pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25 microns minimum to
avoid scratches during transportation and should be supplied in single
length upto 12 metre or as desired by Engineerin-charge. The sheet
shall be fixed using self drilling / self tapping screws of size (5.5x 55
mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or
curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape
wherever required.

sqm

622.00

Providing and fixing precoated galvanised steel sheet roofing

accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-18
microns using self drilling/ self tapping screws complete :
12.51.1

Ridges plain (500 - 600mm)

metre

12.51.2

Flashings/ Aprons.( Upto 600

633.90 metre

12.51.3

mm) North light curves

609.05 metre

12.51.4

Barge board (Upto 300

663.65 metre

12.51.5

mm) Crimp curve

12.51.6

Gutter .(600 mm over all girth)

580.65 sqm
635.00
metre

12.52

Providing and fixing tiled false ceiling of approved materials of size

595x595 mm in true horizontal level, suspended on inter locking metal
grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/
sqm, both side inclusive) consisting of main T runner with suitably
spaced joints to get required length and of size 24x38 mm made
from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to
center and cross T of size 24x25 mm made of 0.30 mm thick
(minimum) sheet, 1200 mm long spaced between main T at 600 mm
center to center to form a grid of 1200x600 mm and secondary cross
T of length 600 mm and size 24x25 mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of the 1200x600 mm panel
to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and
laying false ceiling tiles of approved texture in the grid including,
required cutting/making, opening for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc. Main T runners to be
suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6
mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4
mm GI adjustable rods with galvanised butterfly level clips of size 85 x
30 x 0.8 mm spaced at 1200 mm center to center along main T,
bottom exposed width of 24 mm of all T-sections shall be pre-painted

815.00

with polyester paint, all complete for all heights as per specifications,
drawings and as directed by Engineer-in-charge.

206

SUB HEAD : 12 - ROOFING

Code No.

Description

12.52.1

12.52.2

12.52.3

12.52.4

GI Metal Ceiling Lay in plain Tegular edge Global white

color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm
drop; made of G I sheet having galvanizing of 100 gms/sqm
(both sides inclusive) and electro statically polyester powder
coated of thickness 60 microns (minimum), including factory
painted
after bending.
GI Metal Ceiling Lay in perforated Tegular edge global
white color tiles of size 595x595 mm and 0.5 mm thick with
8 mm drop; made of GI sheet having galvanizing of 100
gms/sqm (both sides inclusive) and 20% perforation area
with 1.8 mm dia holes and having NRC (Noise Reduction
Coefficient ) of 0.5, electro statically polyester powder
coated of thickness 60 microns (minimum), including factory
painted after bending and perforation, and backed with a
black Glass fiber acoustical
fleece.
12.5 mm thick square edge PVC Laminated Gypsum Tile of
size 595x595 mm, made of Gypsum plasterboard,
manufactured from natural gypsum as per IS 2095 part I and
laminated with white 0.16mm thick fire retardant PVC film on
the face side and 12micron metalized polyester on the back
side with all edges sealed with the face side PVC film which
goes around and wraps the edges and is bonded to the
edges and the back side metalized polyester film so as to
make the
tile a completely sealed unit.
12.5 mm thick fully Perforated Gypsum Board tile made from
plasterboard having glass fibre conforming to IS: 2095 part I,
of size 595x595 mm, having perforation of 9.7x9.7 mm at
19.4 mm c/c with center borders of 48 mm and the side
borders of 30 mm, backed with non woven tissue on the back
side, having an NRC ( Noise Reduction Coefficient) of 0.79,
with 50 mm
resin bonded glass wool backing.

12.53

Providing and Fixing 15 mm thick densified tegular edged eco friendly

light weight calcium silicate false ceiling tiles of approved texture
spintone/ cosmos / Hexa or equivalent of size 595 x 595 mm in true
horizontal level, suspended on inter locking metal grid of hot dipped
galvanised steel sections (galvanising @ 120 grams per sqm including
both side) consisting of main T runner suitably spaced at joints to get
required length and of size 24x38 mm made from 0.33 mm thick
(minimum) sheet, spaced 1200 mm centre to centre, and cross T of
size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long
spaced between mainT at 600 mm centre to centre to form a grid of
1200x600 mm and secondary cross T of length 600 mm and size 24
x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at
middle of the 1200x 600 mm panel to from grid of size 600x600 mm,
resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm made of 0.40 mm thick
(minimum) sheet with the help of rawl plugs at 450 mm centre to
centre with 25 mm long dry wall screws @ 230 mm interval and laying

Unit

Rate `

1551.55
sqm

1673.50
sqm

1136.90

sqm

1155.20

sqm

15 mm thick densified edges calicum silicate ceiling tiles of approved

texture (Spintone / Cosmos/hexa) in the grid, including, cutting/ making
opening for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc., wherever required. Main T runners to be suspended
from ceiling
SUB HEAD : 12 - ROOFING

207

Code
No.

12.54

Description

Unit

Rate `

using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with

12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable
rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced
at 1200 mm centre to centre along main T, bottom exposed with 24
mm of all T-sections shall be pre-painted with polyster baked paint, for
all heights, as per specifications, drawings and as directed by engineerin-charge.
Note :- Only calcium silicate false ceiling area will be measured from
wall to wall. No deduction shall be made for exposed frames/opening
(cut outs) having area less than 0.30 sqm.The calcium silicate ceiling
tile shall have NRC value of 0.50 (Minimum), light reflection >
85%, non-combustible as per B.S. 476 part IV, 100% humidity
resistance and also
having thermal conductivity <0.043 w/m 0 KC.

1649.15
sqm

Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm

module which includes providing and fixing C wall angle of size
20x30x20 mm made of 0.5 mm thick pre painted steel along the
perimeter of the room with help of nylon sleeves and wooden screws at
300 mm center to centre, suspending the main C carrier of size
10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help
of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C
carrier suspension clip and main carrier bracket at 1000 mm c/c.
Inverted triangle shaped Spring Tee having height of 24 mm and width
of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C
carrier and in direction perpendicular to it at 600 mm centers with help
of suspension brackets. Wherever the main C carrier and spring T have
to join, C carrier and spring T connectors have to be used. All sections
to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in
tiles into spring T with :
12.54.1

12.54.2

GI Metal Ceiling Clip in plain Beveled edge global white color

tiles of size 600x600 and 0.5 mm thick with 25 mm height,
made of G I sheet having galvanizing of 100 gms/sqm (both
sides inclusive) and electro statically polyester powder
coated of thickness 60 microns (minimum), including factory
painted
after bending.
GI Metal Ceiling Clip in plain Beveled edge global white color
tiles of size 600x600 and 0.5 mm thick with 25 mm height,
made of G I sheet having galvanizing of 100 gms/ sqm (both
sides inclusive) and 20% perforation area with 1.8 mm dia
holes and having NRC of 0.5, electro statically polyester
powder coated of thickness 60 microns (minimum),
including factory
painted after bending and perforation.

12.55

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm

x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70
and initial emittance > 0.75 on waterproof and sloped surface of terrace,
laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement
: 4 coarse sand) and grouting the joints with mix of white cement &
marble powder in ratio of 1:1, including rubbing and polishing of the
surface upto 3 cuts complete, including providing skirting upto 150 mm

1682.60
sqm

1810.65
sqm

height along
the parapet walls in the same manner.

sqm

1133.85

12.56
Providing and laying roof insulation with 40 mm thick impervious
sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming

208

SUB HEAD : 12 - ROOFING

Code
No.

12.57

12.58

Description

Unit

to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat
of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G
polythene sheet over PUF spray and providing a wearing course of
40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone
aggregate 20 mm nominal size) in chequered rough finish, in panels of
2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the
joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.

sqm

Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick,
wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel
plug & washers and held in position by criss crossing GI wire etc.
complete
as per directions of Engineer-in-Charge.

Rate `

1167.20

319.90
sqm

Providing and fixing tiled false ceiling of approved materials of size

595x595 mm in true horizontal level, suspended on interlocking metal
grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/
sqm, both side inclusive) consisting of main T runner with suitably
spaced joints to get required length and of size 24x38 mm made
from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to
center and cross T of size 24x25 mm made of 0.30 mm thick
(minimum) sheet, 1200 mm long spaced between main T at 600 mm
center to center to form a grid of 1200x600 mm and secondary cross
T of length 600 mm and size 24x25 mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of the 1200x600 mm panel
to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and
laying false ceiling tiles of approved texture in the grid including,
required cutting/making, opening for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc. Main T runners to be
suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6
mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4
mm GI adjustable rods with galvanized butterfly level clips of size 85 x
30 x 0.8 mm spaced at 1200 mm center to center along main T,
bottom exposed width of 24 mm of all T-sections shall be pre-painted
with polyester paint, all complete for all heights as per specifications,
drawings and as directed by Engineer-in-charge.
12.58.1

12.59

8 mm thick fully perforated calcium silicate board made with

Calcareous & Siliceous materials reinforced with cellulose
fiber manufactured through autoclaving process to give
stable crystalline structure with minimum compressive
strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of
size 595x595 mm, having perforation of dia. 10 mm with
minimum perforated area 18 % with non woven tissue on the
back side, having an NRC ( Noise Reduction Coefficient) of
0.85, with 50 mm thick
rockwool of 48 kg /cum backing.

Providing & fixing false ceiling at all height including providing & fixing
of framework made of special section, power pressed from M.S. sheets
and galvanised with zinc coating of 120 gms/ sqm (both side inclusive)
as per IS : 277 and consisting of angle cleat of size 25mm wide x
1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one

sqm

1365.55

flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long
with 6mm dia bolts, other flange of cleat fixed to the angle hangers of
25 x10 x0.50mm of
SUB HEAD : 12 - ROOFING

209

Code No.

Description

Unit

Rate `

12.59.1
a. 8 mm thick Calcium Silicate Board made with Calcareous
& Siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process.

sqm

1017.20

Providingand fixing thermal insulation of ceiling (under deck insulation)

with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3,
50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling
with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm
x 24
gauge wire mesh, for top most ceiling of building.

sqm

490.60

position by criss- crossing GI wire.

sqm

324.70

Providing and fixing thermal insulation with Resin Bonded rock wool
conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped
in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel plug &
washers and held and in position by criss cossing GI wire etc.
complete as per
directions of Engineer-in-Charge.

sqm

328.85

Providing and applying two coats of High Albedo paint having

minimum Solar Reflective Index (SRI) 108 (with solar reflectance
& thermal emittance tested as per ASTM) C 1549 and ASTM C 1371
respectively), VOC less than 10 cc/gm. The coating thickness and the
methodology of application shall strctly as per manufacturers
specifications and as approved by engineer In charge. Surface
preparation includes cleaning with metal wire brush to remove all dust,
fungus etc., washing with water all complete. The contractor shall give
guarantee for the perfomance of SRI and also the durabitity of coating,
all complete as per direction of
Engineer-in-incharge.

sqm

257.60

required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at
the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick
bottom wedge of 80mm with tapered flanges of 26 mm each having lips
of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to
G.I intermediate channel with connecting clip made out of 2.64mm dia x
230mm long G.I wire at every junction, including fixing perimeter
channels 0.50mm thick 27mm high having flanges of 20mm and 30mm
long, the perimeter of ceiling fixed to wall/ partitions with the help of
Rawl plugs at 450mm centre, with 25mm long dry wall screws @
230mm interval, including fixing of Calcium Silicate Board to ceiling
section and perimeter channels with the help of dry wall screws of size
3.5 x25mm at 230mm c/c, including jointing & finishing to a flush
finish of tapered and square edges of the board with recommended
jointing compounds, jointing tapes,finishing with jointing compounds in
three layers covering up to 150mm on both sides of joints and two
coats of primer suitable for boards, all as per manufactures
specification and also including the cost of making opening for light
fittings, grills, diffusers, cut outs made with frame of perimeter channels
suitably fixed, all complete as per drawings, specificaton and
direction of the Engineer in charge but excluding the cost of painting
with:

12.60

12.61

12.62

12.63

Providing and fixing thermal insulation with Resin bonded rock wool
conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200
G virgin Polythene bags placed over existing false ceilng and held in

210

SUB HEAD : 12 - ROOFING

SUB-HEAD : 13.0

FINISHING

211

212

BASIC RATES (13.0 FINISHING)

Code
No.

0101
0112
0114
0115
0122
0123
0131
0141
0155*
0156*
0324
0367
0368
0763
0771
0775
0776
0777
0801
0802
0803
0804
0805
0806
0807
0808
0815
0816
0818
0820
0821
0823
0826

Unit

Description

day day day

Bhisti

day day day

Carpenter 2nd class

day day day

Beldar

day litre

Coolie

tonne tonne

Mason (for plaster of paris work) 1 st class

kilogram litre

Mason (brick layer) 1 st class

quintal quintal

Painter

quintal litre

White Washer
Mason (average)

Kg litre

Carpenter
(average) Coal Tar

litre

Portland Cement
White Cement

litre

Glue
Kerosene oil

litre

Dehradun white lime

Satna lime

litre

Dry hydrated lime (factory made)

Silicon and acrylic emulsion

litre kilogram

Acrylic distemper 1st quality , having VOC content less than 50

kilogram litre

grams/ litre

litre

Acrylic emulsion , having VOC content less than 50 grams/ litre

Premium acrylic emulsion of interior grade, having VOC
content
less than 50 grams/ litre
Synthetic enamel paint , having VOC (Volatile Organic
Compound) content less than 150 grams/ litre
Ready mixed pink or grey primer on wood work (hard and soft
wood) having VOC content less than 50 grams/ litre
Ready mixed red oxide zinc chromatic on steel/ iron work,
having VOC content less than 250 grams/ litre
Water thinnable cement primer for interior wall surface,
having VOC content less than 50 grams/ litre
Dry distemper
Oil bound washable distemper/ Acrylic distemper
Linseed oil (double boiled)
Cement primer
Distemper primer
Pink primer (for wood)
Aluminium paint

litre

litre

litre

Rate `

99.00 329.00 329.00 435.00 435.00 399.00 363.00

417.00 417.00 30.00 6300.00 14000.00 70.00 48.00

6
40.00 250.00

3.
0
350.00

3
SUB HEAD : 13 - FINISHING

80.00
36.00

650.00 500.00 230.00 200.00

220.0
0
125.0
0

55.00
120.00
115.00

130.0
0

90.00
90.00
160.00

213

Descripti
on

0827

0828

0829

0830

Code
No.

8505

0831
0833

0834

0835

0850

0851

0855
0856

0857

0858

0859

0868

0869
0982

0999

1000

117

119

1213

1216

2202

2203
2209

2911

4201
4202

4203

4204

4205

4206

4207

7239
7240

7306

8504

c
r
r
o
s
i
v
e
b
i
t
u
m
i
n
o
u
s
p
a
i
n
t
(
b
l
a
c
k
)
B
l
a
c
k
J

except green Synthetic enamel paint in black or

Unit

Rate `

chocolate shade

litre

200.00

Synthetic enamel paint in all shades except black or chocolate shade

litre

115.00

Plastic emulsion paint

litre

100.00

White lead

litre

210.00

Water proofing cement paint

litre

145.00

Wax polish (ready made)

litre

180.00

Ordinary varnish

litre

160.00

Superior copal varnish

litre

210.00

Superior spar varnish

kilogram

150.00

Enamel
paint

Oil type wood preservative

kilogram

45.00

Premixed super white gypsum plaster.

kilogram

260.00

Plaster of Paris

litre

100.00

Coarse sand (zone

litre

190.00

III) Shellac

litre

190.00

Spirit

litre

150.00

Crushed stone 2.36 mm to 12.5 mm size

kg

7.00

kilogram

4.50

Second class kail wood in planks

e

Water proofing materials

Whiting

Carriage of stone aggregate below 40 mm nominal

size Carriage of coarse sand

Carriage of cement

10 cudm

1100.0

Stone chippings/ screenings 10/ 11.2 mm nominal size

kilogram

Aluminium primer
p
a
i
n
t

cum
kilogram
litre
cum

1200.0
0
300.00
70.00

quintal

260.00

Red oxide Zinc chromate primer

cum

35.00

Copper acetate

cum

600.00

Hydrochloric acid

tonne

106.49

Copper chloride

cum

106.49

Copper nitrate

litre

94.65

Ammonium chloride

litre

1250.0

Epoxy paint

kilogram

Fire retardant paint

kilogram

130.00

Aluminium T or L sections
a

kilogram

70.00

Multi surface paint

kilogram

300.00

Acrylic exterior paint

kilogram

35.00

litre

300.00

l
s
h
a
d
e
s

litre

220.00

kilogram

20.00

litre

250.00

litre

300.00
200.00
290.00
180.00

214

SUB HEAD : 13 - FINISHING

Code
No.

8506
8507
8509
8510
8733
9999

Description

Unit

Rate `

Premium Acrylic exterior paint

litre

240.00

Textured exterior paint

litre

240.00

Special Primer (C.W.)

litre

150.00

Metal Primer (U.G.)

litre

160.00

diameter 10-40 microns and specific gravity of 1.34 to

kg

400.00

1.40

L.S.

Synthetic ployster triangular fibre of length 6 mm, effective

Sundries

1.78

SUB HEAD : 13 - FINISHING

215

13.0 FINISHING
Code No.

Description

Unit

Rate `

sqm

163.35

sqm

149.45

sqm

189.40

sqm

172.80

sqm

228.10

sqm

206.50

Note :- Rates for external plaster are for height upto 10m from ground
level unless otherwise stated.
CEMENT PLASTER (IN FINE
SAND) 13.112 mm cement plaster of mix :

13.2

13.3

13.1.1
sand)

1:4 (1 cement: 4 fine

13.1.2
sand)

1:6 (1 cement: 6 fine

15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.1
sand)

1:4 (1 cement: 4 fine

13.2.2
sand)

1:6 (1 cement: 6 fine

20 mm cement plaster of mix :

13.3.1
sand)

1:4 (1 cement: 4 fine

13.3.2
sand)

1:6 (1 cement: 6 fine

CEMENT PLASTER (IN COARSE

SAND) 13.412 mm cement plaster of mix :

13.5

13.6

13.4.1

1:4 (1 cement: 4 coarse sand)

sqm

172.30

13.4.2

1:6 (1 cement: 6 coarse sand)

sqm

158.40

15 mm cement plaster on rough side of single or half brick wall of mix :

13.5.1

1:4 (1 cement: 4 coarse sand)

sqm

200.05

13.5.2

1:6 (1 cement: 6 coarse sand)

sqm

183.45

20 mm cement plaster of mix :

13.6.1

1:4 (1 cement: 4 coarse sand)

sqm

242.05

13.6.2

1:6 (1 cement: 6 coarse sand)

sqm

220.40

sqm

217.15

sqm

203.25

CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT

13.7

13.8

13.9

12 mm cement plaster finished with a floating coat of neat cement of mix :

13.7.1
sand)

1:3 (1 cement: 3 fine

13.7.2
sand)

1:4 (1 cement: 4 fine

15 mm cement plaster on rough side of single or half brick wall finished

with a floating coat of neat cement of mix :
13.8.1

1:3 (1 cement: 3 fine sand)

sqm

245.90

13.8.2

1:4 (1 cement: 4 fine sand)

sqm

229.30

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating

coat of neat cement.
13.9.1

12 mm cement plaster

sqm

226.10

13.9.2

20 mm cement plaster

sqm

303.60

13.10

216

15 mm cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a

floating coat of neat cement on the rough side of single or half brick wall.

sqm

256.60

SUB HEAD : 13 - FINISHING

Code
No.

Unit

Rate `

18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm
thick cement plaster 1:6 (1 cement : 6 fine sand).

sqm

240.55

18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick
cement
plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

sqm

258.90

13.13

12 mm cement plaster 1:2 (1 cement : 2 stone dust).

sqm

200.15

13.14

15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of

single or half brick wall.

sqm

233.35

20 mm cement plaster 1:2 (1 cement : 2 stone dust).

sqm

285.40

sqm

134.70

sqm

181.95

sqm

41.40

sqm

415.90

sqm

394.65

Per bag of
50 kg
cement used
in the mix

50.65

13.11

13.12

13.15

Description

CEMENT PLASTER IN TWO COATS

6 MM CEMENT PLASTER
13.16

6 mm cement plaster of mix :

13.16.1

1:3 (1 cement : 3 fine sand)

13.17
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a
floating coat of neat cement and thick coat of Lime wash on top of walls when dry
for bearing of R.C.C. slabs and beams.
13.18

Neat cement punning.

ROUGH CAST PLASTER

13.19

Rough cast plaster upto 10 m height above ground level with a mixture
of sand and gravel or crushed stone from 6 mm to 10 mm nominal
size, dashed over and including the fresh plaster in two layers, under
layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top
layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10%
finely grounded hydrated lime by volume of cement.
13.19.1

Ordinary cement finish using ordinary cement

PEBBLE DASH PLASTER

13.20

13.21

13.22

Pebble dash plaster upto 10 m height above ground level with a

mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal
size, dashed over and including fresh plaster in two layers under layer
12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10
mm cement plaster with cement mortar 1 : 3 (1 cement : 3 fine sand)
mixed with 10% finely
grounded hydrated lime by volume of cement.
Extra for providing and mixing water proofing material in
cement plaster work in proportion recommended by the
manufacturers.

Extra for plastering exterior walls of height more than 10 m from ground
level for every additional height of 3 m or part thereof.

13.23

13.24

sqm

37.95

Extra for plastering on circular work not exceeding 6 m in radius:

13.23.1

In one coat

sqm

18.80

13.23.2

In two coats

sqm

28.75

sqm

273.25

Extra for plastering done on moulding, cornices or architraves including

neat finish to line and level :
13.24.1 In one coat

SUB HEAD : 13 - FINISHING

217

Code No.

13.25

13.26

Description

Unit

Rate `

13.24.2 In two coats

Extra for plastering :
13.25.1
Spherical
13.25.2
ceiling Groined
13.25.3 ceiling
Flewing soffits
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.

sqm

449.90

sqm

sqm
70.15 sqm
76.35
46.10

sqm

110.95

sqm

43.70

ARTIFICIAL STONE PLASTER

13.27

Extra for lining out plaster to imitate stone or concrete blocks walling.
PLAIN CEMENT MORTAR BANDS

13.28

13.29

13.30

12 mm thick plain cement mortar bands in cement mortar 1:4 (1

cement: 4 fine sand) :
13.28.1 Flush Band
13.28.2 Sunk Band
13.28.3 Raised Band
13.28.4 Moulded Band
18 mm thick plain cement mortar band in cement mortar 1:4 (1
cement : 4 fine sand):

cm
cm
cm
cm

metre
metre
metre
metre

3.15
3.45
3.90
6.45

13.29.1

Flush Band

cm per metre

3.90

13.29.2

Sunk Band

cm per metre

4.25

13.29.3

Raised Band

cm per metre

4.85

13.29.4

Moulded Band

cm per metre

8.75

18 mm thick moulded cement mortar band in two coats under layer

12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6
mm thick with cement mortar 1:4 (1 cement : 4 fine sand).
cm per metre

8.75

per
per
per
per

POINTING OF BRICK WORK

13.31

Pointing on brick work or brick flooring with cement mortar 1:3 (1

cement: 3 fine sand) :
13.31.1

Flush / Ruled/ Struck or weathered pointing

sqm

106.35

13.31.2

Raised and cut pointing

sqm

172.45

sqm

145.65

POINTING ON TILE BRICK WORK

13.32

Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):
13.32.1

Flush/ Ruled/ Struck or weathered pointing

POINTING ON STONE WORK

13.33

13.34
13.35

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1

Flush/ Ruled pointing

sqm

152.85

13.33.2

Raised and cut pointing

sqm

276.70

sqm

295.40

sqm

86.85

Raised and cut pointing on stone work in white cement mortar 1:3 (1
white cement : 3 marble dust).
Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine
sand) :
13.35.1

Flush/ Ruled pointing

218

SUB HEAD : 13 - FINISHING

Code
No.

13.36

Description

Unit

Rate `

Extra for pointing on walls on the outside at height more than 10 m from
ground level for every additional height of 3 m or part there of.

sqm

5.55

sqm

16.20

sqm

6.60

New work (two or more coats) with a base coat of white washing
with lime
sqm

22.05

New work (two or more coats) with a base coat of whiting

sqm

21.70

sqm

68.60

sqm

89.70

sqm

50.65

sqm

35.85

sqm

57.85

sqm

146.45

sqm

90.00

sqm

94.95

INTERIOR FINISHING
13.37

White washing with lime to give an even shade :

13.37.1

New work (three or more coats)

13.38

Satna lime wash on walls with one coat.

13.39

Colour washing such as green, blue or buff to give an even shade :

13.39.1
13.39.2

13.40
Distempering with dry distemper of approved brand and manufacture
(two or more coats) of required shade on new work, over and including water
thinnable priming coat to give an even shade.
13.41

Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :
13.41.1

13.42

Distempering with 1st quality acrylic distemper (ready mixed) of

approved manufacturer, of required shade and colour
complete, as per manufacturers specification.
13.42.1

13.43

New work (two or more coats) over and including water tinnable priming coat with cement primer

Two or more coats on new work

Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface :
13.43.1

Water thinnable cement primer

EXTERIOR FINISHING
13.44

Finishing walls with water proofing cement paint of required shade :

13.44.1

13.45

New work (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing walls with textured exterior paint of required shade :

13.45.1
New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied @ 2.20kg/
10 sqm

13.46

Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1

13.47

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade :
13.47.1

13.48

New work (Two or more coat applied @ 1.67 ltr/10 sqm

over and including priming coat of exterior primer applied @
2.20
kg/ 10 sqm)

New work (Two or more coats applied @ 1.43 ltr/ 10 sqm

over and including priming coat of exterior primer applied @
2.20
kg/ 10 sqm)

Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :

SUB HEAD : 13 - FINISHING

219

Code No.

Description

13.48.1

13.48.2

13.48.3

Unit

Rate `

Two or more coats applied on walls @ 1.25 ltr/10 sqm over

and including one coat of Special primer applied @ 0.75 ltr /
10 sqm

sqm

100.00

Painting wood work with Deluxe Multi Surface Paint of

required shade. Two or more coat applied @ 0.90 ltr/10
sqm over an under coat of primer applied @0.75 ltr/ 10
sqm of approved
brand and manufacture

sqm

88.20

Painting Steel work with Deluxe Multi Surface Paint to give

an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm
over an under coat of primer applied @ 0.80 ltr/ 10 sqm of
approved
brand and manufacture

sqm

90.00

With ready mixed pink or Grey primer of approved brand and

manufacture on wood work (hard and soft wood)

sqm

32.95

With ready mixed aluminium primer of approved brand and

manufacture on resinous wood and plywood

sqm

36.45

brand and manufacture on steel galvanised iron/ steel works

sqm

27.00

With ready mixed red oxide zinc chromate primer of approved

brand and manufacture on steel work (second coat)

sqm

14.65

13.49

Deleted

13.50

Applying priming coat :

13.50.1
13.50.2
13.50.3
13.50.4

13.51

13.52

13.53

Painting with silicon & acrylic emulsion based water thinnable sealer
of approved brand and manufacture on wet or patchy portion of
plastered surfaces :
13.51.1

One coat

sqm

68.65

13.51.2

Two coats

sqm

109.25

Finishing with Epoxy paint (two or more coats) at all locations

prepared and applied as per manufacturers specifications including
appropriate priming coat, preparation of surface, etc. complete.
13.52.1

On steel work

sqm

116.55

13.52.2

On concrete work

sqm

121.15

sqm

78.50

sqm

27.00

sqm

26.80

Painting on G.S. sheet with synthetic enamel paint of approved brand

and manufacture of required colour to give an even shade :
13.53.1

13.54

13.55

With ready mixed red oxide zinc chromate primer of approved

New work (two or more coats) including a coat of approved

steel primer but excluding a coat of mordant solution

Applying a coat of mordant solution on G.S. sheet :

13.54.1 With a solution of 38 gms of copper acetate in a litre of soft
water
13.54.2
With a solution made of 13 gms of hydrochloric acid in a
solution of 13 gms each of copper chloride, copper nitrate
and ammonium chloride dissolved in a litre of soft water
Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture, over and including a priming of ready mixed zinc
chromate yellow primer on new work :

220

SUB HEAD : 13 - FINISHING

Code No.

Description

13.55.1
13.55.2

100 mm diameter
pipes

Unit

Rate `

metre

34.05

metre

50.85

metre
metre

38.65
57.60

sqm

31.90

sqm

247.65

sqm

31.75

sqm

80.50

sqm

74.40

sqm

106.25

sqm

65.80

sqm

77.05

sqm

61.40

sqm

75.05

Two or more coats of glue sizing with copal varnish over an

under coat of flatting varnish

sqm

114.70

Two or more coats glue sizing with spar varnish or an under

coat of flatting varnish

sqm

116.35

150 mm diameter
pipes
13.56

13.57

13.58

13.59
13.60

13.61

13.62

13.63

13.64

13.65

Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with synthetic enamel paint of approved brand and
manufacture and required colour over a priming coat of approved steel
primer on new work.
13.56.1 100 mm diameter pipes
13.56.2 150 mm diameter pipes
Painting with oil type wood preservative of approved brand and
manu-facture :
13.57.1 New work (two or more coats)
Providing and applying two coats of fire retardant paint on cleaned
wood / ply surface @ 3.5 sqm per litre per coat including preparation
of base surface as per recommendations of manufacturer to make the
surface
fire retardant.
Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar
per sqm in the first coat and second coat respectively.
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
13.60.1 Two or more coats on new work
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :
13.61.1 Two or more coats on new work
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :
13.62.1 Two or more coats on new work over an under coat of suitable
shade with ordinary paint of approved brand and manufacture
Painting with aluminium paint of approved brand and manufacture to
give an even shade .
13.63.1 Two or more coats on new work
Painting with acid proof paint of approved brand and manufacture of
required colour to give an even shade :
13.64.1 Two or more coats on new work
Painting with black anti-corrosive bitumastic paint of approved brand
and manufacture to give an even shade :
13.65.1

13.66

Floor painting with floor enamel paint of approved brand and

manufacture of required colour to give an even shade :
13.66.1

13.67

Two or more coats on new work

Two or more coats on new work

Varnishing with varnish of approved brand and manufacture :

13.67.1
13.67.2

SUB HEAD : 13 - FINISHING

221

Code
No.

13.68

Description

Two or more coats on new works including a coat of wood

filler

Polishing on wood work with ready mixed wax polish of approved brand
and manufacture :
13.69.1 New work

13.70

Floor polishing on masonry or concrete floors with wax polish of

approved brand and manufacture.

13.71

Lettering with black Japan paint of approved brand and manufacture

13.72

13.73

13.74
13.75
13.76

Washed stone grit plaster on exterior walls height upto 10 metre

above ground level, in two layers, under layer 12 mm cement plaster
1:4 (1 cement : 4 coarse sand ), furrowing the under layer with
scratching tool, applying cement slurry on the under layer @ 2 Kg of
cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1
cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in
panels with groove all around as per approved pattern, including
scrubbing and washing the top layer with brushes and water to expose
the stone chippings ,complete as per specification and direction of
Engineer-in- charge (payment for provo-ding grooves shall be made
separately).

13.78

sqm

193.95

sqm

85.15

sqm

39.60

per etter
per cm
height

2.45

sqm

553.45

Forming groove of uniform size in the top layer of washed stone grit
plaster as per approved pattern using wooden battens, nailed to the
under layer, including removal of wooden battens, repair to the edges
of panels and finishing the groove complete as per specifications and
direction of the Engineer-in-charge :
13.73.1

15 mm wide and 15 mm deep groove

metre

31.60

13.73.2

20 mm wide and 15 mm deep groove

metre

32.10

Extra for washed grit plaster on exterior walls of height more than 10 m
from ground level for every additional height of 3 m or part thereof.

sqm

83.35

Extra for washed stone grit plaster on circular work not exceeding 6 m in
radius (in two coats).

sqm

55.50

metre

70.75

Extra for using white cement in place of ordinary cement in the top layer
of the item of washed stone grit plaster.

sqm

89.45

Providing and applying 12 mm thick (average) premixed formulated

one coat gypsum lightweight plaster having additives and light
weight aggregates as vermiculite/ perlite respectively conforming to IS:
2547 (Part - 1 & II) 1976, applied on hacked / uneven background
such as bare brick/ block/ RCC work on walls & ceiling at all floors and
locations, finished
in smooth line and level etc. complete.

sqm

244.35

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in

the top layer of washed stone grit plastered surface as per approved
pattern, including providing and fixing aluminum channels of appropriate
size and thickness (not less than 2 mm), nailed to the under layer with
rust proof screws and nails and finishing the groove complete as per
specifications and direction of the Engineerin-Charge.

13.77

Rate `

French spirit polishing :

13.68.1

13.69

Unit

222

SUB HEAD : 13 - FINISHING

Code
No.

13.79

13.80

13.81

13.82

13.83

13.84

13.85

Description

Unit

Rate `

Extra for addition of synthetic Polyester triangular fibre of length 6

mm, effective diameter 10-40 microns and specific gravity of 1.34 to
1.40 in cement plaster/mortar by using 125 gms. of synthetic
Polyester triangular fibre for 50 Kgs. cement used in cement mortar
as per directions of Engineer-in-Charge.

Per Bag of
50 Kg of
cement

58.05

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered wall surface
to prepare the surface even and smooth complete.

sqm

89.65

Distempering with 1st quality acrylic distemper, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre, of approved
brand and m anufacture, including applying additional coats wherever
required, to achieve even shade and colour.
13.81.1

One coat

sqm

28.50

13.81.2

Two coats

sqm

45.70

Wall painting with acrylic emulsion paint, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre, of approved
brand and manufacture, including applying additional coats wherever
required, to achieve even shade and colour.
13.82.1

One coat

sqm

50.10

13.82.2

Two coats

Sqm

75.35

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/
litre of approved brand and manufacture, including applying additional
coats wherever required to achieve even shade and colour.
13.83.1

One coat

sqm

49.25

13.83.2

Two coats

Sqm

75.35

Painting with synthetic enamel paint, having VOC (Volatile Organic

Compound) content less than 150 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required to
achieve even shade and colour.
13.84.1

One coat

sqm

47.40

13.84.2

Two coats

sqm

71.60

sqm

36.10

With ready mixed red oxide zinc chromatic on steel / iron works
having VOC content less than 250 grams/ litre
sqm

30.80

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

35.85

Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content.
13.85.1
13.85.2
13.85.3

With ready mixed pink or grey primer on wood work (hard and
soft wood) having VOC content less than 50 grams/ litre

SUB HEAD : 13 - FINISHING

sqm

223

224

SUB-HEAD : 14.0

REPAIRS TO BUILDING

225

226

BASIC RATES (14.0 REPAIRS TO

BUILDING)

Code
No.

Description

0006

Hire charges of Spraying machine including electric

0011

charges Hire charges of Pump set of capacity 4000

0100

litres/hour Bandhani

0101

Bhisti

0102

Blacksmith 1 st class

0103

Blacksmith 2nd class

0111

Carpenter 1 st class

0112

Carpenter 2nd class

0114

Beldar

0115

Coolie

0117

Assistant Fitter or 2nd class Fitter

0119

Glazier

0123

Mason (brick layer) 1 st class

0124

Mason (brick layer) 2nd class

0128

Mate

0130

Mistry

0131

Painter

0141

White Washer

0155*

Mason (average)

0156*

Carpenter

0295

(average)

0297

Stone Aggregate (Single size) : 20 mm nominal

0302

size Stone Aggregate (Single size) : 10 mm

0308

nominal size Safeda ballies 125 mm diameter

0367

Bhusa

0389

Portland Cement

0390

Brass single acting spring hinges 150 mm

0391

Brass single acting spring hinges 125 mm

0392

Brass single acting spring hinges 100 mm

0393

Brass double acting spring hinges 150 mm

0394

Brass double acting spring hinges 125 mm

0404

Brass double acting spring hinges 100 mm

0405
0406
0417
0418

Unit

Rate `

day

250.00

day

600.00

day

363.00

day

363.00

day

435.00

day

399.00

day

435.00

day

399.00

day

329.00

day

329.00

day

399.00

day

399.00

day

435.00

day

399.00

day

363.00

day

435.00

day

399.00

day

363.00

day

417.00

day

417.00

cum

1175.00

cum

1175.0

metre

0 42.00

quintal

500.00

tonne

6300.0

each

each

320.00

each

280.00

each

180.00

each

520.00

each

380.00
330.00

each

150.00

each

130.00

Brass flush bolt 250 mm

each

90.00

Brass flush bolt 150 mm

10 Nos

170.00

Brass flush bolt 100 mm

Brass 150 mm floor door stopper (0.357kg)
Brass hard drawn hooks and eyes 300 mm

750.00

SUB HEAD : 14 - REPAIRS TO BUILDING

227

Code
No.

0419
0420
0421
0422
0423
0427
0428
0429
0430
0442
0444
0445
0446
0449
0450
0452
0524
0525
0526
0527
0528
0585
0586
0587
0589
0595
0597
0608
0637
0639
0640
0761
0771

Description

Unit

Rate `

Brass hard drawn hooks and eyes 250

10 Nos

700.00

mm Brass hard drawn hooks and eyes

10 Nos

645.00

200 mm Brass hard drawn hooks and

10 Nos

620.00

eyes 150 mm Brass hard drawn hooks

10 Nos

525.00

and eyes 100 mm Brass casement

each

60.00

window fastener

each

125.00

Brass quadrant stays 300 mm

10 Nos

175.00

Brass fanlight catch

10 Nos

195.00

Brass fanlight pivot

each

40.00

Brass chain with hook for fan light catch

each

310.00

Brass helical spring 150 mm

metre

115.00

Brass curtain rod 20 mm dia 1.25 mm thick

metre

135.00

Brass curtain rod 25 mm dia 1.25 mm thick

each

42.00

Brass brackets (curtain rods) 20 mm

100 Nos

220.00

Brass screws 50 mm

100 Nos

170.00

Brass screws 40 mm

100 Nos

100.00

Brass screws 25 mm
Chromium plated Brass butt hinges (heavy) type 75x65x4
mm (200gms)

10 Nos

1000.00

Chromium plated Brass butt hinges (light/ordinary) type 125x

70x4 mm

10 Nos

850.00

Chromium plated Brass butt hinges (light/ordinary) type 100x

70x4 mm

10 Nos

700.00

Chromium plated Brass butt hinges (light/ordinary) type 75x

40x2.5 mm

10 Nos

460.00

Chromium plated Brass butt hinges (light/ordinary) type 50x

40x2.5 mm

10 Nos

200.00

100 Nos

250.00

Chromium plated Brass screws 50 mm

100 Nos

220.00

Chromium plated Brass screws 40 mm

100 Nos

160.00

Chromium plated Brass screws 30 mm

100 Nos

100.00

Bright finished or black enameled mild steel butt hinges 100x

58x1.90 mm

10 Nos

90.00

Bright finished or black enameled mild steel butt hinges 50x

37x1.50 mm

10 Nos

55.00

Chromium plated Brass screws 20 mm

Nickel plated bright finished mild steel piano hinges 1 mm thick

25 mm wide

metre

42.00

100 Nos

52.00

Bright finished or black enameled mild steel screws 40 mm

100 Nos

38.00

Bright finished or black enameled mild steel screws 25 mm

100 Nos

32.00

Bright finished or black enameled mild steel screws 20 mm

quintal

525.00

litre

48.00

Fuel wood
Kerosene oil

228

SUB HEAD : 14 - REPAIRS TO BUILDING

Code
No.

0775
0811
0815
0816
0826
0827
0828
0829
0833
0835
0845
0851
0855
0856
0857
0858
0859
0863
0982
0999
1000

Description

Unit

Rate `

quintal

650.00

cum

65.00

Dry distemper

kilogram

36.00

Oil bound washable distemper/ Acrylic distemper

kilogram

55.00

Aluminium paint

litre

160.00

Acid proof paint (chocolate or black)

litre

200.00

Anticorrosive bituminous paint (black)

litre

115.00

Black Japan paint

litre

100.00

Synthetic enamel paint in black or chocolate shade

litre

180.00

Plastic emulsion paint

litre

210.00

Roofing paint for iron sheets in red

litre

130.00

colour Water proofing cement paint

kilogram

45.00

Wax polish (ready made)

kilogram

260.00

Ordinary varnish

litre

100.00

Superior copal varnish

litre

190.00

Superior spar varnish

litre

190.00

Oil type wood

litre

150.00

kilogram

30.00

Dehradun white lime

Mud (dry)

preservative Putty for

wood work Coarse sand
(zone III) Shellac
Spirit

cum

1200.00

kilogram

300.00

litre

70.00

Mild steel round bar above 12 mm dia

quintal

4400.00

Structural steel such as tees, angles channels and R.S. joists

quintal

4636.00

Flats up to 10 mm in thickness

quintal

4200.00

Galvanised steel J or L hooks 8 mm dia

10 Nos

120.00

Bolts and nuts up to 300 mm in length

quintal

5600.00

Red sand stone slab 45 mm to 50 mm thick (un-dressed)

sqm

175.00

Superior class teak wood such as Dandeli, Balarshah or

Malabar in planks

10 cudm

1100.00

118

Second class teak wood in scantling

10 cudm

660.00

Second class teak wood in planks

10 cudm

750.00

Second class deodar wood in planks

10 cudm

500.00

First class kail wood in planks

10 cudm

310.00

Sal wood in scantling

10 cudm

530.00

Bitumen washer

100 Nos

30.00

G.I. plain washer thick

100 Nos

35.00

Water proofing materials

kilogram

32.00

Welding by electric plant

cm

2.00

each

40.00

1003
1007
1008
1023
1034
117

1189
1190
1194
1196
1199
1208
1209
1213
1215
1314

C.P.brass chain with 32 mm dia rubber plug

SUB HEAD : 14 - REPAIRS TO BUILDING

229

Code
No.

Description

Unit

C.P.brass chain with 40 mm dia rubber

each

40.00

1000 Nos

283.96

Carriage of stone aggregate below 40 mm nominal

cum

106.64

size Carriage of coarse sand

cum

106.64

Carriage of timber

cum

121.88

Carriage of steel

tonne

94.65

Carriage of cement

tonne

94.65

Carriage of stone blocks white & red sand stone & kota stone slab

tonne

94.65

Carriage of rubbish

cum

106.49

2406

Float glass sheet of nominal thickness 4 mm (weight not less

than 10 kg/sqm)

sqm

345.00

2407

Float glass sheet of nominal thickness 5.5 mm (weight not less

than 13.50 kg/sqm)

sqm

520.00

10 cudm

340.00

Chromium plated Brass pull bolt lock (locking bolt) of size 85 mm x

42 mm with screws, bolts, nuts and washers complete

each

170.00

Common burnt clay F.P.S. (non modular) bricks class designation

1000 Nos

4500.00

7.5 Mild steel tubes hot finished welded type

kilogram

55.00

Red oxide Zinc chromate primer

litre

70.00

Dash fastener / Chemical fastner

each

15.00

Melamine polish

litre

300.00

Stainless steel pin.

kg

190.00

each

55.00

kilogram

45.00

Base Jack

each

180.00

Challies

each

800.00

Cup locks

each

80.00

Wheel 75 mm dia. 40 mm wide

each

65.00

Acrylic exterior paint

litre

180.00

Premium Acrylic exterior paint

litre

240.00

Textured exterior paint

litre

240.00

Primer for cement paint

litre

78.00

Sundries

L.S.

1.78

1315
2201
2202
2203
2204
2205
2209
2216
2264

2466
2467
2602
4009
4202
7019
7241
7340
7346
7387
7397
7398
7399
7442
8505
8506
8507
8508
9999

plug Carriage of bricks

Hollock wood in scantling

Double coupler
Spigot for standard jointing

Rate `

230

SUB HEAD : 14 - REPAIRS TO BUILDING

14.0 REPAIRS TO BUILDING

Code No.

Description

14.1

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5

sq. meters and under, including cutting the patch in proper shape,
raking out joints and preparing and plastering the swall urface of the
walls complete, including disposal of rubbish to the dumping ground
within 50 metres lead :

14.2

14.3

14.4

14.5

14.6

14.7

14.8

14.9
14.10
nails

Unit

Rate `

14.1.1

With cement mortar 1:4 (1 cement : 4 fine sand)

sqm

247.80

14.1.2
sand)

With cement mortar 1:4 (1cement: 4 coarse

sqm

259.15

each
each
each

790.75
487.35
354.80

each

156.10

sqm

494.05

Fixing chowkhats in existing opening including embedding chowkhats in

floors or walls cutting masonry for holdfasts, embedding hold fasts in
cement concrete blocks of size 15 x 10 x 10 cm with cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size), painting two coats of approved wood preservative to
sides of chowkhats and making good the damages to walls and floors
as required complete, including disposal of rubbish to the dumping
ground within 50 meters lead :
14.2.1
Door chowkhats
14.2.2
Window chowkhats
14.2.3
Clerestory window chowkhats
Fixing chowkhat in existing opening in brick / RCC wall with dash
fasteners/ Chemical fasteners of appropriate size (3 nos on each
vertical member of door chowkhat and 2 nos on each vertical member
of window chowkhats), including Cost of dash fasteners/ chemical fastener.
Making the opening in brick masonry including dismantling in floor
or walls by cutting masonry and making good the damages to walls,
flooring and jambs complete, to match existing surface i/c disposal of
mulba/ rubbish to the nearest municipal dumping ground.
14.4.1
For door/ window/ clerestory window
Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:
14.5.1

Float glass panes of thickness 4 mm

sqm

690.70

14.5.2

Float glass panes of thickness 5.5 mm

sqm

914.25

Renewing glass panes, with wooden fillets wherever necessary:

14.6.1

Float glass panes of thickness 4 mm

sqm

882.55

14.6.2

Float glass panes of thickness 5.5 mm

sqm

1106.10

Renewing glass panes and refixing existing wooden fillets:

14.7.1

Float glass panes of thickness 4 mm

sqm

734.50

14.7.2

Float glass panes of thickness 5.5 mm

sqm

958.10

Supplying and fixing new wooden fillets wherever necessary:

14.8.1
2nd class teak wood fillets
14.8.2
Hollock wood fillets
Renewal of old putty of glass panes (length)

metre
metre
metre

37.30
31.80
23.15

sqm

300.75

Refixing old glass panes with putty and

SUB HEAD : 14 - REPAIRS TO BUILDING

231

Code
No.

14.1
1
14.12

14.13

14.14

Description

Unit

Rate `

Fixing old glass panes with wooden fillets (excluding cost of fillets)

sqm

264.70

Providing and fixing 16 mm M.S. Fan clamps of standard shape and

size in existing R.C.C. slab, including cutting chase, anchoring
clamp to reinforcement bar, including cleaning, refilling, making good
the chase with matching concrete, plastering and painting the
exposed portion of
the clamps complete.

each

247.00

Regrading terracing of mud phaska covered with tiles or brick, in

cement by dismantling tiles or bricks, removing mud plaster, preparing
the surface of mud phaska to proper slope, relaying mud plaster gobri
leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement :
3 fine sand), including replacing unserviceable tiles or bricks with new
ones and disposal of unserviceable material to the dumping ground (the
cost of the new tiles
or brick excluded) within 50 metres lead.

sqm

282.10

sqm

561.30

cum

68145.70

14.16.1.1 Sal wood beams

cum

70367.60

14.16.1.2 Hollock wood beams

cum

47627.90

14.16.2.1 Sal wood beams

71408.1

cum 14.16.2.2 Hollock wood beams

cum

48643.5

Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1

cement : 4 coarse sand), including necessary repairs and cement
pointing with same mortar complete, including disposal of rubbish to
dumping ground within 50 metres of lead :
14.14.1

14.15

Renewing wooden battens in roofs, including making good the holes

in wall and painting with oil type wood preservative of approved brand
and manufacture complete, including removal of rubbish to the dumping
ground within 50 metres lead :
14.15.1

14.16

14.16.2

14.18

14.19

Sal wood battens

Renewing wooden beams in roofs including making good the holes

in walls and painting with oil type wood preservative of approved brand
and manufacture complete, including removal of rubbish to the dumping
ground within 50 metres lead :
14.16.1

14.17

Red/ white sand stone slabs 30 to 50 mm thick

Not exceeding 4.00 metres in length.

Above 4.00 metres and upto 5.00 metres length.

Raking out joints in lime or cement mortar and preparing the surface for
re-pointing or replastering, including disposal of rubbish to the dumping
ground within 50 metres lead.

0
sqm

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% of integral water proofing compound by weight of cement for
flat tile bricks on top of mud phaska :

26.55

14.18.1

With F.P.S. brick tiles

sqm

57.90

14.18.2

With modular brick tiles

sqm

59.05

Taking out wind ties from roof including cutting out rusted bolts, nuts etc.
and removing materials to any distance within compound and stacking.

kg

2.05

232

SUB HEAD : 14 - REPAIRS TO BUILDING

Code
No.

14.20

14.21

14.22

Description

Unit

Rate `

metre

74.10

kg

147.60

per wheel
per wheel

124.15
191.15

kilo litre

94.00

cum

403.30

cum

3824.30

14.26.1 Panelled or panelled & glazed shutters :

14.26.1.1 Superior class teak wood including nickel plated bright finished
M.S. piano hinges with necessary screws.
sqm

3442.10

Fixing of old wind tie with new fittings including painting two or more
coats with anticorrosive bitumastic paint of approved brand &
manufacturer over and including priming coat of ready mixed zinc
chromate yellow primer of
approved brand.
Renewing bottom rail and/or top runner of collapsible gate including
making good all damages and applying priming coat of zinc chromate
yellow primer
of approved brand and manufacturer.
Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and
fitting and fixing the same with necessary clamps, nuts and
bolts/welding and erection etc. complete.
14.22.1 Wheel 50 mm dia and below
14.22.2 Wheel above 50 mm dia
EARTH WORK

14.23

Pumping out water caused by springs, tidal or river seepage, broken

water mains or drains and the like.

14.24

Mud mortar made with local clay good

earth. BRICK WORK

14.25

Brick work with common burnt clay bricks of class designation 7.5 in
mud mortar
WOOD WORK

14.26

Providing and fixing 25 mm thick shutters for cup board etc. :

14.26.1.2 Ist class teak wood including nickel plated bright finished M.S.
piano hinges with necessary screws.

2904.35
sqm

14.26.2 Glazed shutters :

14.26.2.1 Superior class teak wood including nickel plated bright finished
M.S. piano hinges with necessary screws.
sqm
14.26.2.2 Ist class teak wood including nickel plated bright finished M.S.
piano hinges with necessary screws.
sqm
14.27

14.28

14.29

3538.65
2960.60

Providing and fixing plain jaffri door and window shutters including
bright or/and black enamelled M.S. butt hinges with necessary screws
35x10 mm laths placed 35 mm apart (frames to be paid separately),
including fixing 50x12 mm beading complete with :
14.27.1 Second class teak wood
Providing and fixing curtain rods of 1.25 mm thick brass plates with
two brass brackets fixed with brass screws and wooden plugs etc.
wherever necessary complete.
14.28.1 20 mm diameter.
14.28.2 25 mm diameter.

sqm

2996.95

metre
metre

211.90
235.10

Providing and fixing M.S. round or square bars with M.S. flats at required
spacing in wooden frames of windows and clerestory windows.

kg

70.20

SUB HEAD : 14 - REPAIRS TO BUILDING

233

Code
No.

14.30

14.31

14.32

14.33

Description

14.36
14.37
14.38
14.39
14.40

Rate `

Providing joists (karries) including hoisting, fixing in position and

applying wood preservative on unexposed surface etc. complete with :
14.30.1

Sal wood

cum

67117.50

14.30.2

Hollock wood

cum

44607.70

Providing and fixing bright finished brass single acting spring hinges
with necessary brass screws etc. complete :
14.31.1

150 mm

each

420.75

14.31.2

125 mm

each

374.25

14.31.3

100 mm

each

253.45

Providing and fixing bright finished brass double acting spring hinges
with necessary brass screws etc. complete :
14.32.1

150 mm

each

653.05

14.32.2

125 mm

each

490.40

14.32.3

100 mm

each

247.70

Providing and fixing bright finished brass flush bolts with necessary
brass screws etc. complete :
14.33.1

250 mm

each

192.05

14.33.2

150 mm

each

167.10

14.33.3

100 mm

each

120.65

each

210.75

14.34
Providing and fixing 150 mm bright finished floor brass door stopper
with rubber cushion, necessary brass screws etc. to suit shutter thickness
complete
14.35

Unit

Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.1

300 mm

each

90.35

14.35.2

250 mm

each

84.50

14.35.3

200 mm

each

78.15

14.35.4

150 mm

each

75.25

14.35.5

100 mm

each

64.20

Providing and fixing bright finished brass fan light pivot with necessary
brass screws etc. complete.

each

34.80

Providing and fixing 300 mm long bright finished brass chain with hook
for fan light including necessary brass screws etc. complete.

each

56.35

Providing and fixing bright finished brass quadrant stay 300 mm long with
necessary brass screws etc. complete.
each

155.05

Providing and fixing bright finished brass helical door spring (superior
quality).

each

401.25

each

139.40

Providing and fixing chromium plated brass butt hinges with necessary
chromium plated brass screws etc. complete.
14.40.1

125x70x4 mm (ordinary type)

14.40.2

100x70x4 mm (ordinary type)

14.40.3

75x65x4 mm (heavy type)

each
113.40
each

138.55

234

SUB HEAD : 14 - REPAIRS TO BUILDING

Code No.

Description

Unit

Rate `

14.40.4

each

75.85

each

32.10

each

210.35

14.40.5

75x40x2.5 mm (ordinary
type)
50x40x2.5 mm (ordinary
type)

14.41
Providing and fixing 85x42 mm chromium plated brass pull bolt lock
with necessary chromium plated brass screws, nuts, bolts and washers etc.
complete.
FINISHING
14.42

White washing with lime to give an even shade :

14.42.1

Old work (two or more coats)

sqm

9.70

14.42.2

Old work (one or more coats)

sqm

5.95

sqm

7.60

Distempering with dry distemper of approved brand and manufacture (one

or more coats) and of required shade on old work to give an even shade. sqm

28.20

14.43
Removing white or colour wash by scrapping and sand papering
and preparing the surface smooth including necessary repairs to scratches
etc. complete
14.44
14.45

Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :
14.45.1

Old work (one or more coats)

14.46
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface smooth
including necessary repairs to scratches etc. complete.
14.47

sqm

9.90

Old work (one or more coats)

sqm

40.55

metre

25.45

Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture over and including a priming coat of ready mixed
zinc chromate yellow primer on new work :
14.48.1

14.49

32.00

Painting on G.S. sheet with synthetic enamel paint of approved brand

and manufacture of required colour to give an even shade :
14.47.1

14.48

sqm

75 mm diameter pipes

Painting (one or more coats) on rain water, soil, waste and vent pipes
and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture on old work :
14.49.1

75 mm diameter pipes

metre

14.49.2

100 mm diameter pipes

12.45 metre

14.49.3

150 mm diameter pipes

16.35
metre

14.50

23.40

Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with aluminium paint of approved brand and manufacture
over a priming coat of ready mixed zinc chromate yellow primer on new
work :
14.50.1

75 mm diameter pipes

14.50.2

100 mm diameter

14.50.3

pipes
150 mm diameter
pipes

metre
26.55 metre
37.75
metre

56.25

14.51

Painting (one or more coats) on rain water, soil, waste and vent pipes
and fittings with synthetic enamel paint of approved brand and
manufacture and required colour on old work :
14.51.1

75 mm diameter pipes

SUB HEAD : 14 - REPAIRS TO BUILDING

metre

13.10

235

Code No.

Description

14.51.2
14.51.3

100 mm diameter
pipes

Unit

Rate `

metre

16.85

metre

24.10

sqm

24.65

sqm

52.50

sqm

48.50

sqm

42.45

sqm

50.15

sqm

40.95

sqm

98.25

sqm

43.25

150 mm diameter
pipes
14.52

Painting with oil type wood preservative of approved brand and manufacture:
14.52.1

14.53

Wall painting with plastic emulsion paint of approved brand and

manufacture to give an even shade :
14.53.1

14.54

One or more coats on old work

Painting with acid proof paint of approved brand and manufacture of

required colour to give an even shade :
14.56.1

14.57

One or more coats on old work

Painting with aluminium paint of approved brand and manufacture to

give an even shade :
14.55.1

14.56

One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture

of required colour to give an even shade :
14.54.1

14.55

Old work (one or more coats)

One or more coats on old work

Painting with black anti-corrosive bitumastic paint of approved brand

and manufacture to give an even shade :
14.57.1

One or more coats on old work

14.58

French spirit polishing :

14.58.1

One or more coats on old work

14.59

Polishing on wood work with ready made wax polish of approved brand
and manufacture :
14.59.1

14.60

14.61
14.62

14.63

Re-lettering with black Japan paint of approved brand and manufacture. Per letter
per cm
height
Painting (one or more coats) with black Japan paint of approved brand
and manufacture to give an even shade.

1.55

sqm

42.00

Providing and fixing C.P. brass chain and rubber plug complete for sink
or wash basin :
14.62.1

32 mm dia

each

63.10

14.62.2

40 mm dia

each

63.10

sqm

28.80

sqm

54.45

Distempering with 1st quality acrylic washable distemper (ready made)

of approved manufacturer and of required shade and colour complete.
as per manufacturers specification.
14.63.1

14.64

Old work

One or more coats on old work

Finishing walls with water proofing cement paint of required shade :

14.64.1

Old work (one or more coats applied @ 2.20 kg/10 sqm) over
priming coat of primer applied @ 0.80 litrs/10 sqm complete
including cost of Priming coat.

236

SUB HEAD : 14 - REPAIRS TO BUILDING

Code No.

14.65

Description

Unit

Rate `

14.64.2

sqm

36.95

Old work (Two or more coats on existing cement paint surface

applied @ 3.28 ltr/10 sqm.

sqm

125.00

Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

sqm

75.80

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on

existing cement paint surface

sqm

67.30

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

sqm

43.85

Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over
existing cement paint surface

sqm

73.35

Old work (one or more coats applied @ 0.83 ltr/10 sqm).

sqm

48.25

Finishing walls with textured exterior paint of required shade :

14.65.1
14.65.2

14.66

Finishing walls with Acrylic Smooth exterior paint of required shade :

14.66.1
14.66.2

14.67

Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade
14.67.1
14.67.2

14.68

Deleted.

14.69

Varnishing with varnish of approved brand and manufacture:

14.70

14.69.1

One or more coats with copal varnish

sqm

48.25

14.69.2

One or more coats with spar varnish

sqm

49.10

sqm

76.70

sqm

44.50

sqm

159.90

kg

482.05

each

47.05

Melamine polishing on wood work (one or more coat).

14.71

Varnishing with flatting varnish of approved brand and mamufacture one or more coats on old work.

14.72

Providing and fixing double scaffolding system (cup lock type) on

the exterior side, up to seven story height made with 40 mm dia M.S.
tube 1.5 m centre to centre, horizontal & vertical tubes joining with
cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and
M.S. staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required duration as
approved and removing it there after .The scaffolding system shall be
stiffened with bracings, runners, connection with the building etc
wherever required for inspection of work at required locations with
essential safety features for the workmen etc. complete as per
directions and approval of Engineerin-charge .The elevational area of the
scaffolding shall be measured for payment purpose
.The payment will be made once irrespective of duration of scaffolding.
Note: - This item to be used for maintenance work judicially, necessary
deduction for scaffolding in the existing item to be done.

14.73

Providing and fixing bright finished brass casement window fasteners or

peg stays to windows/ ventilators with necessary welding and machine
screws etc.
complete.

14.74

Providing and fixing 14 mm bright finished brass spring catch to steel

centre hung ventilators with necessary welding and machine screws etc.
complete.
Note :- Item no. 14.73 & 14.74 are brought from Sub head 10 Steel work
Item no. 10.23 & 10.24).

SUB HEAD : 14 - REPAIRS TO BUILDING

237

238

SUB-HEAD : 15.0

DISMANTLING
AND
DEMOLISHING

239

240

BASIC RATES (15.0 DISMANTLING AND DEMOLISHING)

Code
No.

0038
0039
0040
0041
0100
0101
0103
011
2
011
4
011
5
011
6
011
7
0123
0124
0128
0130
0139
0761
0771
2264
9999

Description

Unit

Rate `

Tractor with ripper attachment

day

1350.00

Tractor with trolley

day

1500.00

Air compressor 250 cfm with two leads for pneumatic cutters /

day

2000.00

hammers Joint cutting machine with 2-3 blades

day

1100.00

Bandhani

day

363.00

Bhisti

day

363.00

Blacksmith 2nd class

day

399.00

Carpenter 2nd class

day

399.00

Beldar

day

329.00

Coolie

day

329.00

Fitter (grade 1)

day

435.00

Assistant Fitter or 2nd class Fitter

day

399.00

Mason (brick layer) 1 st class

day

435.00

Mason (brick layer) 2nd class

day

399.00

Mate

day

363.00

Mistry

day

435.00

Skilled Beldar (for floor rubbing

day

363.00

quintal

525.00

Kerosene oil

litre

48.00

Carriage of rubbish

cum

106.49

Sundries

L.S.

1.78

etc.) Fuel wood

SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

241

15.0 DEMANTLING AND DEMOLISHING

Code
No.

Description

Unit

Rate `

15.1

Demolishing lime concrete manually/ by mechanical means and disposal

of material within 50 metres lead as per direction of Engineerin-charge.

cum

311.65

15.2

Demolishing cement concrete manually/ by mechanical means

including disposal of material within 50 metres lead as per direction of
Engineer - in - charge.
15.2.1

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

cum

892.70

15.2.2

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design

mix)

cum

550.50

15.3
Demolishing R.C.C. work manually/ by mechanical means
including stacking of steel bars and disposal of unserviceable material within 50
metres lead as per direction of Engineer - in- charge.

1302.30
cum

15.4
Demolishing R.B. work manually/ by mechanical means including
stacking of steel bars and disposal of unserviceable material within 50 metres

1163.70

lead as per direction of Engineer-in- charge.

15.5

15.6
15.7

15.8

15.9

15.10

cum

Extra for cutting reinforcement bars manually/ by mechanical means

in R.C.C. or R.B. work (Payment shall be made on the cross sectional area
of R.C.C. or R.B. work) as per direction of Engineer -in -charge.

450.45
sqm

Extra for scrapping, cleaning and straightening reinforcement from R.C.C.

or R.B. work.

3.55
kg

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
15.7.1

In mud mortar

cum

258.15

15.7.2

In lime mortar with old mughal bricks

cum

651.75

15.7.3

In lime mortar

cum

15.7.4

In cement mortar

311.65
cum

754.10

Removing mortar from bricks and cleaning bricks including stacking

within a lead of 50 m (stacks of cleaned bricks shall be measured) :
15.8.1

From brick work in mud mortar

1000 nos

1717.65

15.8.2

From brick work in lime mortar

1000 nos

1994.25

15.8.3

From brick work in cement mortar

1000 nos

2502.00

Demolishing stone rubble masonry manually/ by mechanical means

including stacking of serviceable material and disposal of unserviceable
material within 50 metres lead as per direction of Engineer-in-charge :
15.9.1

In lime mortar

cum

424.35

15.9.2

In cement mortar

cum

899.85

Dismantling dressed stone work ashlar face stone work, marble work
or precast concrete work manually/ by mechanical means including
stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-charge :

15.10.1

242

In lime mortar

cum

536.80

SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

Code No.

15.11

Description

Unit

Rate `

15.10.2

cum

1052.70

In lime mortar

cum

177.10

In cement mortar

cum

254.35

In cement mortar

Removing mortar from and cleaning stones and concrete articles (net
quantity of stacks of cleaned materials will be measured) :
15.11.
1
15.11.
2

15.12

15.13

15.14

15.15

Dismantling doors, windows and clerestory windows (steel or wood)

shutter including chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :
15.12.1

Of area 3 sq. metres and below

each

141.25

15.12.2

Of area beyond 3 sq. metres

each

193.85

Taking out doors, windows and clerestory window shutters (steel or

wood) including stacking within 50 metres lead :
15.13.1

Of area 3 sq. metres and below

each

54.80

15.13.2

Of area beyond 3 sq. metres

each

72.55

cum

1718.80

Dismantling wood work in frames, trusses, purlins and rafters up to

10 metres span and 5 metres height including stacking the material
within 50 metres lead :
15.14.1

Of sectional area 40 square centimetres and above

15.14.2

Of sectional area below 40 square centimetres

15.15.2

Of sectional area 40 square centimetres and above

Of sectional area below 40 square centimetres

Cum per
metre span

235.00

Metre per
metre span

0.65

Extra for dismantling trusses, rafters, purlins etc. of wood work for every
additional height of one metre or part thereof beyond 5 metres :
15.16.1
15.16.2

15.17

6.85

Extra for dismantling trusses, rafters, purlins etc. of wood work for every
additional span of one metre or part thereof beyond 10 metres :
15.15.1

15.16

metre

Of sectional area 40 square centimetres and above

Of sectional area below 40 square centimetres

Cum per
metre height

334.60

Metre per
metre height

1.30

Dismantling steel work in single sections including dismembering and

stacking within 50 metres lead in:
15.17.1

R.S. Joists

kg

1.30

15.17.2

Channels, angles, tees and flats

kg

0.90

15.18
Dismantling steel work in built up sections in angles, tees, flats
and channels including all gusset plates, bolts, nuts, cutting rivets, welding
etc. including dismembering and stacking within 50metres lead.

kg

2.15

15.19
Dismantling steel work manually/ by mechanical means in built up
sections without dismembering and stacking within 50 metres lead as per direction
of Engineer-in-charge.

kg

1.45

15.20

Extra for dismantling trusses, rafters, purlins etc. of steel work for every
Kg per
additional span of one metre or part thereof beyond 10 metres
metre span

0.30

SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

243

Code
No.

Description

Unit

15.21

Extra for dismantling trusses, rafters, purlins etc. of steel work for
every additional height of one metre or part thereof beyond 5
metres.

15.22

Extra for marking of structural steel work required to be re-erected.

15.23

Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.

Rate `

Kg per meter
height

0.30

kg

1.75

15.23.1

For thickness of tiles 10 mm to 25 mm

sqm

28.20

15.23.2

For thickness of tiles above 25 mm and up to 40 mm

sqm

43.95

15.24
Demolishing dry brick pitching in floors, drains etc. including
stacking serviceable material and disposal of unserviceable material within 50
metres lead :

cum

483.30

15.25
Dismantling stone slab flooring laid in cement mortar including
stacking of serviceable material and disposal of unserviceable material within 50
metres lead.

sqm

97.95

Demolishing brick tile covering in terracing including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.
sqm

40.80

15.26
15.27
15.28

Demolishing mud phaska in terracing and disposal of material within 50

metres lead.

cum

334.60

Dismantling roofing including ridges, hips, valleys and gutters etc.,

and stacking the material within 50 metres lead of :
15.28.1

G.S. Sheet

sqm

62.80

15.28.2

Asbestos sheet

sqm

29.50

Dismantling stone slab roofing over wooden karries or R.C.C.

battens (dismantling karries and battens to be paid for separately),
including stacking of serviceable material and disposal of
unserviceable material
within 50 metres lead.

cum

979.65

Dismantling jack arch roofing and floors including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.

sqm

93.40

15.31
Dismantling tiled roofing with battens, boarding etc. complete
including stacking of serviceable material and disposal of unserviceable material
within 50 metres lead.

sqm

77.35

15.32
Demolishing thatch roofing including mats, bamboo, jaffari etc.
complete including stacking of serviceable material and disposal of unserviceable
material within 50 metres lead.

sqm

21.40

metre

7.65

each

97.65

each

110.50

Cutting ballies or wooden posts of fencing at the point of projection above

the concrete or ground and stacking the same within 50 metres lead.
each

8.60

15.29

15.30

15.33
15.34

Dismantling wooden ballies in posts and struts including stacking within

50 metres lead.
Dismantling and stacking within 50 metres lead, fencing posts or
struts including all earth work and dismantling of concrete etc. in base of
:
15.34.1
15.34.2

T or L iron or
pipe
R.C.C.

15.35

15.36

244

Dismantling barbed wire or flexible wire rope in fencing including making

rolls and stacking within 50 metres lead.

kg

13.50

SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

Code
No.

15.37
15.38
15.39

15.40

Description

Unit

Rate `

Dismantling wooden trellis work excluding frames but including stacking

the serviceable material within 50 metres lead.

sqm

24.30

beading including stacking the serviceable material within 50 metres lead. sqm

28.40

Dismantling expanded metal or I.R.C. fabrics with necessary battens and

Dismantling wooden boardings in lining of walls and partitions, excluding
supporting members but including stacking within 50 metres lead :
15.39.1

Up to 10 mm thick

15.39.2

Thickness above 10 mm up to 25 mm

23.35 sqm

15.39.3

Thickness above 25 mm up to 40 mm

29.75

15.43

15.44

15.45

34.95

15.40.1

Thickness up to 40 mm

sqm

107.55

15.40.2

Thickness above 40 mm up to 75 mm

sqm

161.10

sqm

21.85

Dismantling C.I. or asbestos rain water pipe with fittings and clamps
including stacking the material within 50 metres lead :
15.42.1

75 to 80 mm dia pipe

15.42.2

100 mm dia pipe

27.70 metre

15.42.3

150 mm dia pipe

28.60

metre

metre

29.45

Dismantling manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-charge :
15.43.1

Water bound macadam road

sqm

81.60

15.43.2

bituminous road

sqm

159.05

Dismantling G.I. pipes (external work) including excavation and

refilling trenches after taking out the pipes, manually/ by mechanical
means including stacking of pipes within 50 metres lead as per
direction of Engineer-in-charge :
15.44.1

15 mm to 40 mm nominal bore

metre

57.85

15.44.2

Above 40 mm nominal bore

metre

65.25

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead
caulked joints, melting of lead and making into blocks including stacking
of pipes & lead at site within 50 metre lead as per direction of Engineerin-charge:
15.45.1

Up to 150 mm diameter

15.45.2

Above 150 mm dia up to 300 mm

dia

15.45.3

Above 300 mm diameter

15.46

sqm
Dismantling precast concrete or stone slabs in walls, partition walls
etc. including stacking within 50 metres lead :

15.41
Dismantling cement asbestos or other hard board ceiling or partition
walls including stacking of serviceable materials and disposal of unserviceable
materials within 50 metres lead.
15.42

sqm

Dismantling steel cylinder R.C. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

metre
168.60 metre
223.20
metre

289.55

breaking lead caulked joints, melting of lead and making into blocks
including stacking of pipes & lead at site within 50 metres lead as per
direction of Engineer-in-charge :
SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

245

Code No.

15.47

15.48

15.49

15.50

Description

Rate `

15.46.1

Up to 600 mm diameter

metre

271.90

15.46.2

Above 600 mm
diameter

metre

681.85

Dismantling asbestos cement pressure pipes including excavation and

refilling trenches after taking out the pipes manually/ by mechanical
means and stacking the pipes within 50 metres lead as per direction of
Engineer-in-charge :
15.47.1

Up to 150 mm diameter

metre

121.35

15.47.2

Above 150 mm diameter

metre

147.40

Taking out C.I. cover with frame from R.C.C. top slab of manholes
of various sizes including demolishing of R.C.C. work manually/
by mechanical means and stacking of useful materials near the site
and disposal of unserviceable materials within 50 metres lead as per
direction
of Engineer-in-charge.
Taking out C.I. cover with frame from R.C.C. top slab of inspection
chambers of various sizes including demolishing of R.C.C. work
manually/ by mechanical means and stacking of useful materials near
the site and disposal of unserviceable materials within 50 metres lead
as per direction
of Engineer-in-charge.

262.05
each

153.75
each

Dismantling of R.C.C. spun vent shaft including excavating the

cement concrete pit completely, taking out the shaft, refilling the
excavated gap, stacking the useful materials near the site and disposal
of unserviceable
materials within 50 metres lead.

15.51

Unit

1754.75

each

Dismantling of road gully chamber of various sizes including C.I.

grating with frame including stacking of useful materials near the site
and disposal of unserviceable materials within 50 metres lead
including refilling the
excavated gap.

each

15.52
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious
China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

each

15.53

15.54

354.45

Dismantling of C.I. sluice valve including stacking of useful materials

within a lead of 50 metres
15.53.1

Up to 150 mm diameter

each

128.55

15.53.2

Above 150 mm diameter

each

455.75

each

275.00

Dismantling of spindle fire hydrant including stacking of useful materials

within 50 metres lead.

15.55

357.30

Dismantling of cement concrete platform along with curtain walls and

base concrete etc. including stacking of useful materials near the site
and disposal of unserviceable materials within 50 metres lead :
15.55.1

120 x 120 cm (outside to outside)

each

15.55.2

210 x 120 cm (outside to outside)

404.20 each

15.55.3

320 x 120 cm (outside to outside)

620.05
each

877.45

15.56

246

Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
within 50
metres lead.

sqm

20.05

SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

Code
No.

15.57

15.58

15.59

15.60

Description

Unit

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed

glazing and false ceiling including disposal of unserviceable surplus
material and stacking of serviceable material with in 50 meters lead
as directed by
Engineer-in-charge.

sqm

Demolishing R.C.C. work by mechanical means and stockpiling at

designated locations and disposal of dismantled materials up to a lead
of 1 kil ometre, stacking serviceable and unserviceable material
separately
including cutting reinforcement bars.
Dismantling of flexible pavement (bituminous courses) by mechanical
means and disposal of dismantled material up to a lead of 1 kilometre,
as
per direction of Engineer-in-charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled
or waste materials by mechanical means, including loading,
transporting, unloading to approved municipal dumping ground or as
approved by Engineer-in-charge, beyond 50 m initial lead, for all leads
including all lifts
involved.

Rate `

21.85

1374.50
cum
204.75
cum
123.70

cum

SUB HEAD : 15 - DISMENTLING AND DEMOLISHING

247

248

SUB-HEAD : 16.0

ROAD WORK

249

250

BASIC RATES (SH: 16.0 ROAD

WORK)

Code
No.

Description

0001

Hire charges of Coaltar Boiler 900 to 1400 litres

0002

Hire charges of Concrete Mixer 0.25 to 0.40 cum with

0003

Hopper Hire charges of Diesel Road Roller - 8 to 10 tonne

0004

Production cost of concrete by batch mix plant

0005

Hire charges of Diesel Truck - 9 tonne

0007

Hire charges of Coaltar Sprayer

0008

Hire charges of Barber green, drying, mixing and Asphalt

Plant, with accessories, capacity 30/45 tonne

0009

Pumping charges of concrete including Hire charges of pump,

piping work & accessories etc.

0013
0014
0016
0017
0018
0021
0022
0029
0030
0033
0038
0041
0042
0043
0045
0046
0047
0048
0049
0050
0051
0052
0053
0054
0055
0056
0057
0058
0059
0060

Machine for rubbing of floors

Front end loader capacity 1.00 cum
Mastic Cooker
Hire and running charges of tipper
Hire and running charges of loader
Pin vibrator
Surface Vibrator
Carriage of concrete by transit mixer
Generator 250 KVA
Paint applicator
Tractor with ripper attachment
Joint cutting machine with 2-3 blades
C.C .batch mix plant
Road sweeper
Slip form paver with sensor
Water tanker 5000 litre
Concrete joint cutting machine
Texturing machine
Dozer D-80-A 12
Motor Grader 3.35 metre blade
Hydraulic Excavator of 1 cum bucket
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum tonne
Vibratory roller 8 to 10 tonne
Smooth Wheeled Roller 8 to 10 tonne
Tandem Road Roller
Water Tanker 5 to 6 KL capacity
Air compressor
Wet Mix Plant 60 TPH
Mechanical Broom Hydraulic

Unit

Rate `

day

830.00

day

800.00

day

1500.00

cum

350.00

day

1700.00

day

250.00

day

7700.00

cum
day
day
day
day
day
day
day

150.00
350.00
5000.00
750.00
1700.00
5000.00
350.00
400.00
km/cum
30.00 day
2300.00 day
750.00 day
1350.00 day
1100.00 day
10000.00 day
550.00 day
13000.00 day
1000.00 day
900.00 day
925.00 hour
1750.00 hour
2450.00 hour
1200.00 hour
900.00 km
3.00 hour
1300.00 hour
450.00 hour
1150.00 hour
150.00 hour
325.00 hour
1200.00
hour
360.00

SUB HEAD : 16 - ROAD WORK

251

Code
No.

0061
0062
0063
0064
0065
0066
0068
0069
0070
0071

Description

Unit

Rate `

Emulsion Pressure Distributor @ 1750 sqm per

hour Hot mix Plant -120 TPH capacity

hour

800.00

hour

23700.00

Hot mix Plant 100 TPH Capacity

hour

17500.00

Paver finisher Hydrostatic with sensor control 100

TPH Paver finisher Mechanical 100 TPH

hour

2700.00

hour

1000.00

Batching and Mixing Plant @ 75 cum per hour

hour

2500.00

Concrete Paver finisher with 40 HP Motor and

hour

2900.00

sensor Generator 250 KVA

hour

700.00

Generator 100 KVA/125 KVA

hour

500.00

Truck 5.5 cum/ 10 tonnes

tonne km

3.00

Road sweeper (Mechamical Broom) @ 1250 sqm per hour

hour

360.00

Drum Type HMP of 60-90 TPH capacity @ 75 tonne per

hour actual output

hour

14000.00

Day

1300.00

Bandhani
Bhisti

day

363.00

day

363.00

Blacksmith 1 st class

day

435.00

Blacksmith 2nd class

day

399.00

Chowkidar

day

329.00

Beldar

day

329.00
329.00

0115

Coolie
Mason (brick layer) 1 st class

day
day

435.00

0123

Mason (brick layer) 2nd class

day

399.00

0124

Mason (for ornamental stone work) 1 st class

day

435.00

0126

Mate
Mistry

day

363.00

day

435.00

Painter
Sprayer (for bitumen, tar etc.)

day

399.00

0131

day

363.00

0138

Skilled Beldar (for floor rubbing etc.)

day

363.00

0139

Mason (average)

day

417.00

0155*

Operator (Pile/ Special machine)

day

417.00

0157

Brick Aggregate (Single size) : 50 mm nominal size

cum

600.00

0286

Brick Aggregate (Single size) : 40 mm nominal size

cum

600.00

0287

Stone Aggregate (Single size) : 63 mm nominal size

cum

1050.00

0291

Stone Aggregate (Single size) : 50 mm nominal size

cum

1050.00

0292

Stone Aggregate (Single size) : 40 mm nominal size

cum

1050.00

0293

Stone Aggregate (Single size) : 25 mm nominal size

cum

1050.00

0294

Stone Aggregate (Single size) : 20 mm nominal size

cum

1175.00

Stone Aggregate (Single size) : 12.5 mm nominal size

cum

1175.00

Stone Aggregate (Single size) : 10 mm nominal size

cum

1175.00

0075
0076
0083
0100
0101
0102
0103
0113
0114

0128
0130

0295
0296
0297

Hire charges of TATA 407 or equivalent for local shifting.

252

SUB HEAD : 16 - ROAD WORK

Code
No.

0298
0304
0309
0310
0312
0313
0314
0317
0323
0349
0364
0365
0367
0369
0370
0371
0374
0588
0777
0784
0810
0979
0982
0983
1003
1005
1007
1008
1013
1021
1028
1029
1030

Description

Unit

Rate `

Stone Aggregate (Single size) : 06 mm nominal

cum

1140.00

size Bajri

cum

1150.00

Paving bitumen of grade VG-10 of approved

tonne

50600.00

quality Bitumen emulsion

tonne

39040.00

Bitumen grade PMB - 40

tonne

59000.00

Blown type petroleum bitumen of penetration 85/25 of

approved quality

tonne

49600.00

kilogram

28.00

Premoulded joint filler 12 mm thick

sqm

350.00

Separation Membrane of impermeable plastic sheeting 125 micron

thick

sqm

12.00

litre
each

50.00
20.00

each
tonne

18.00
6300.00

sqm
quintal

30.00
400.00

kg
sqm

125.00
500.00

100 Nos
quintal

125.00
230.00

cum
cum

1000.00
450.00

cum
cum

30.00
1200.00

cum
quintal

700.00
4400.00

quintal
quintal

4759.00
4636.00

quintal
quintal

4200.00
5000.00

sqm
each

440.00
70.00

quintal
each

5200.00
19.00

Bitumen hot sealing compound : grade A

Curing compound
Wire brush
Soft brush
Portland Cement
Plastic sheath,1.25 mm thick for dowel bars
Coal (steam)
Sealant primer
Pre moulded Joint filler, 25 mm thick for expansion joint.
Chromium plated Brass screws 25 mm
Dry hydrated lime (factory made)
Marble dust/ powder
Moorum
Royalty for good earth
Coarse sand (zone III)
Fine sand (zone IV)
Mild steel round bar above 12 mm dia
Twisted steel/ deformed bars
Structural steel such as tees, angles channels and R.S. joists
Flats up to 10 mm in thickness
Mild steel sheets for tanks
Hard drawn steel wire fabric
Straining bolts
Galvanised steel barbed wire
Galvanised steel turn buckles
Boundary stone top chisel dressed 15x15x90 cm

1151
1158

Stone for pitching 15 cm x 22.5 cm

1159
1179

Crushed stone 2.36 mm to 12.5 mm size

1235
1241

Commercial LPG in cylinder

Stone dust
Diesel oil

each
cum

70.00
450.00

cum
cum

1100.00
1100.00

litre
kg

55.49
88.00

SUB HEAD : 16 - ROAD WORK

253

Code
No.

1980
2200
2201
2202
2203
2205
2206
2208
2209
2211
2215
2216
2241
2260
2261
2265
2267
2302
2311
2314
2335
2342
2602
2704
2901
2902
2903
2904
2908
2909
2910
2911
2914
2916
5001
6501
7254
7255
7256
7280

Description

Unit

Fly ash

cum

8.00

Carriage of steam coal

tonne

121.70

1000 Nos

283.96

cum

106.49

size Carriage of coarse sand

cum

106.49

Carriage of steel

tonne

94.65

Carriage of stone aggregate 40 mm nominal size and

cum

115.75

above Carriage of lime

cum

106.49

Carriage of cement

tonne

94.65

Carriage of tar / bitumen

tonne

106.49

Carriage of Soling stone & masonry stone

cum

125.28

Carriage of stone blocks white & red sand stone & kota stone slab

tonne

94.65

Carriage of good earth

cum

133.11

Carriage of brick aggregate

cum

115.75

Carriage of fine sand (1 part badarpur sand: 2 parts jamuna

cum

106.49

sand) Carriage of moorum

cum

106.49

Carriage of stone dust

cum

106.49

Carriage of G.I.sheet and

tonne

94.65

accessories Carriage of red bajri

cum

106.49

Carriage of barbed wire

tonne

94.65

cum

106.49

quintal

10.65

Carriage of bricks
Carriage of stone aggregate below 40 mm nominal

Carriage of Jamuna sand

Carriage of Solvent /

Rate `

Diesel.

1000 Nos

4500.00

Common burnt clay F.P.S. (non modular) bricks class designation

kilogram

225.00

7.5 Aluminium Strip 40 mm wide and 2 mm thick

cum

1000.00

Stone Aggregate (Single size) : 100 mm nominal size

cum

1000.00

Stone Aggregate (Single size) : 80 mm nominal size

cum

1150.00

Stone chippings/ screenings 4.75 mm nominal size

cum

1150.00

Stone chippings/ screenings 150 micron nominal size

cum

450.00

Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm

cum

470.00

size Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm

cum

1250.00

size Stone chippings/ screenings 12.5/ 13.2 mm nominal

cum

1250.00

size Stone chippings/ screenings 10/ 11.2 mm nominal size

kilometre

25.00

tonne

50600.0

Paving Asphalt VG 10 of approved

litre

0 253.00

quality Mobil oil

cum

600.00

Sand zone V (Jamuna)

litre

40.00

Hardening compound

litre

120.00

Road marking paint (spirit based)

litre

170.00

Solvent

Superior quality road marking paint ( water based )

Waste plastic additive

tonne

40000.00

254

SUB HEAD : 16 - ROAD WORK

Code
No.

7295
7296
7297
7309
7318
7382
7426
7739
7741
7742
7773
7774
7893
7895
7896
8685
8686
8687
8688
8689
8690
8691
8692
8693
8694
8695
8696
8697
8785
9999

Description

Unit

Rate `

Granite of any colour, 18 mm thick (slab area upto 0.50 sqm)

sqm

1900.00

Granite of any colour, 30 mm thick (slab area upto 0.50 sqm)

sqm

2300.00

Granite of any colour, 18 mm thick (slab area above 0.50

sqm

2000.00

sqm) Paving Asphalt of grade VG-30 of approved quality

tonne

41000.0

kilogram

0 38.00

Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887

tonne

29800.0

Cats eye

each

0 180.00

Modified Bitumen Refinery produced CRMB -

tonne

52674.0

55 Modified Bitumen Refinery produced CRMB

tonne

- 60

tonne

52747.0

Bitumen emulsion medium setting (M.S.) confirming to IS :

sqm

8887 Coloured inter locking C.C. paver Block

each

39283.0

Stone size 10x10x7.50cm

sqm

0 500.00

Tactile tile

sqm

9.00

Matt finished vitrified tile 100x100 x16 mm

sqm

900.00

Vitrified tile

each

930.00

Delineator

cum

510.00

Precast C.C. Kerb stone M

kg

275.00

-Thermoplastic paint

kg

4100.00

Plasticizer / super plasticizer

Glass beads

sqm

60.00

Interlocking C.C. paver block ( 60 mm thick, M-30)

sqm

60.00
350.00

High intensity retro - reflective sheet

Punched tape concertina coil 600 m dia 10 m openable
length (Total length 90 m)
RBT reinforced barbed wire
Turn buckle and strengthening bolt each

bundle

1525.00

metre
set
each

750.00
9.00
40.00

Precast pavement slab 450 x 450 x 50 mm (M - 30)

Chain link fabric fencing mesh of size 50x50 mm made of G.I.
wire of dia 4 mm

sqm

70.00

Chain link fabric fencing mesh of size 50x50 mm made of G.I.

wire of dia 4 mm, PVC coated to outer dia 5 mm

sqm

258.00

Chain link fabric fencing mesh of size 25x25 mm made of

G.I. wire of dia 3 mm

sqm

285.00

sqm
L.S.

340.00

Interlocking C.C. paver block ( 80 mm thick, M-30)

Sundries

466.65
1.78

SUB HEAD : 16 - ROAD WORK

255

16.0 ROAD WORK

Code
No.

Description

Unit

Rate `

Preparation and consolidation of sub grade with power road roller of 8 to

12 tonne capacity after excavating earth to an average of 22.5 cm
depth, dressing to camber and consolidating with road roller including
making good the undulations etc. and re-rolling the sub grade and
disposal of
surplus earth with lead upto 50 metres.

sqm

81.29

Extra for compaction of earth work in embankment under optimum

moisture conditions to give at least 95% of the maximum dry density
(proctor density).

cum

10.15

ROADS
16.1

16.2

16.3

Supplying and stacking at site.

16.3.1

90 mm to 45 mm size stone aggregate

cum

1310.45

16.3.2

63 mm to 45 mm size stone aggregate

cum

1348.20

16.3.3

53

cum

1354.00

16.3.4

aggregate

cum

657.10

16.3.5

Over burnt (Jhama) brick aggregate 120 mm to 40

cum

680.35

16.3.6

mm Over burnt (Jhama) brick aggregate 90 mm to 45

cum

1558.15

16.3.7

mm Stone screening 13.2 mm nominal size (Type A)

cum

1471.00

16.3.8

Stone screening 11.2 mm nominal size (Type B)

cum

1459.40

16.3.9

Red bajri

cum

320.90

16.3.10

Good earth

cum

646.35

cum

425.05

cum

328.60

cum

328.60

sqm

14.90

metre

124.30

mm

to

22.4

mm

size

stone

Moorum
16.4

16.5

16.6

Laying, spreading and compacting stone aggregate of specified sizes to

WBM specifications in uniform thickness, hand picking, rolling with 3
wheeled road / vibratory roller 8-10 tonne capacity in stages to proper
grade and camber, applying and brooming requisite type of screening /
binding material to fill up interstices of coarse aggregate, watering and
compacting to the required density .
Laying water bound macadam sub-base with brick aggregate and
blinding material, earth etc. including screening, sorting and spreading
to template and consolidation with light power road-roller etc. complete.
(payment for brick aggregate and moorum etc. to be made separately)
16.5.1
mm

Over burnt (Jhama) brick aggregate 120 mm to 40

16.5.2

Over burnt (Jhama) brick aggregate 90 mm to 45 mm

Supplying, stacking and Spreading 6 mm thick red bajri, watering and

rolling complete including preparation of the surface and rolling.
16.6.1

16.7

Brick edging in full brick width and half brick depth including excavation,
refilling and disposal of surplus earth lead upto 50 metres.
16.7.1

16.8

With road roller/ hand roller

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Brick edging laid lengthwise with half brick depth including excavation,

refilling and disposal of surplus earth lead upto 50 metres :

256

SUB HEAD : 16 - ROAD WORK

Code No.

Description

Unit

Rate `

metre

35.40

sqm

13.75

roller.

sqm

129.35

Dry stone pitching 22.5 cm thick including supply of stones and preparing
surface complete.

sqm

422.80

sqm

438.40

16.8.1
16.9

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Scarifying metalled (water-bound) road surface including disposal of

rubbish, lead upto 50 m and consolidation of the aggregate received
from
scarifying with power road roller of 8 to 10 tonne capacity.

16.10

Making bajri path including preparation of subgrade, supplying and

laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding
material consisting of 12 mm moorum and 12 mm red bajri consolidated
with road

16.11
16.12

Dry brick pitching half brick thick in drains including supply of bricks and
preparing the surface complete :
16.12.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

16.13
Cutting road and making good the same including supply of extra
quantities of materials i.e. aggregate, moorum screening, red bajri and labour
required.

16.14

16.13.1

bituminous portion

cum

2447.70

16.13.2

Water bound
macadam

cum

1276.10

Cutting bajri paths and making good the same including supply of extra
quantities of brick aggregate, moorum and red bajri required.

120.15
sqm

FENCING
16.15

Supplying at site :

16.15.1

R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5

coarse sand : 3 graded stone aggregate 12.5 mm nominal
size) with wooden plugs or 6mm bar nibs wherever required
as per direction of Engineer-incharge (cost of earth works in
excavation, concrete works in foundation to be paid
separately).

16.15.2

16.16
16.17

cum

Welded steel wire fabric of required width having rectangular mesh

painted with two or more coats of enamel paint of
approved shade over a coat of primer (Priming & Painting
to
be paid for separately).

kg

Supplying and fixing turn buckles and straining bolts for barbed wire
fencing. each

set

Fencing with R.C.C. post placed at required distance, embedded in

cement concrete blocks, every 15th post, last but one end post and
corner post shall be strutted on both sides and end post one side only,
provided with horizontal lines and two diagonals of barbed wire
weighing 9.38 kg per 100 metres (minimum), between the two posts
fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire
tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C.
posts, struts, earth work and concrete to be paid for separately) :Payment to be made per metre cost of total length of barbed wire
used.

20469.55

66.05
155.35

16.18

16.17.1 With G.I. barbed wire

Fencing with angle iron post placed at required distance embedded in
cement concrete blocks, every 15th post, last but one end post and
corner post shall be strutted on both sides and end post on one side
only and

SUB HEAD : 16 - ROAD WORK

metre

8.40

257

Code No.

16.19

16.20

16.21
16.22

16.23

16.24

Description

Unit

provided with horizontal lines and two diagonals interwoven with

horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum),
between the two posts fitted and fixed with G.I. staples, turn buckles
etc. complete. (Cost of posts, struts, earth work and concrete work
to be paid for separately). Payment to be made per metre cost of total
length of barbed wire used.
16.18.1 With G.I. barbed wire
Supplying at site Angle iron post & strut of required size including
bottom to be split and bent at right angle in opposite direction for 10 cm
length
and drilling holes upto 10 mm dia. etc. complete.

metre

12.95

Kg.

70.90

sqm

28.15

per cm height
per letter

4.30

Welded steel wire fabric fencing with posts of specified material and of
standard design placed and embedded in cement concrete blocks
45x45x 60 cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone
aggregate 40 mm nominal size), every 15th post, last but one end post
and corner post shall be strutted on both sides and end post on one
side only and struts embedded in cement concrete blocks 70x45x50
cm of the same mix, provided with welded steel wire fabric fixed
between the posts fitted and fixed with G.I. staples on wooden plugs or
tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel
wire fabric, painting, earth work in
excavation and concrete to be paid for separately).
ROAD SIGNS
Engraving letters in hard stone

Rate `

Providing and fixing 15x15x90 cm boundary stone of hard stone with top
30 cm chisel dressed on all four sides including top (cost of excavation,
refilling and concrete etc. to be paid for separately).
Providing and fixing 15 cm dia at top, 20 cm at bottom and 90 cm high
precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand:
3 graded stone aggregate 20 mm nominal size) boundary stone as
per standard design, including finishing smooth with cement mortar
1:3 (1 cement : 3 fine sand) (cost of excavation, refilling and concreting
to be
paid for separately).
Providing and fixing precast reinforced cement concrete 1:1.5:3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal
size) kilometre stone as per standard design, including finishing smooth
in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of
earth work, concrete in foundation, painting and lettering etc. which shall
be paid for separately.
16.24.1
35x111x25 cm size
16.24.2
50x152.5x25 cm size
16.24.3 35x93.5x18 cm size

each

135.75

each

461.40

each
1804.75 each
3307.20
each
1216.15

SURFACE DRESSING
16.25

Surface dressing on new surface with paving bitumen of grade VG - 10

of approved quality using 2.25 kg of bitumen per sqm with 1.65 cum of
stone chippings 13.2 mm nominal size per 100 sqm of road surface,
including
consolidation with road roller of 6 to 8 tonne capacity etc. complete:

sqm

192.85

16.26

258

Surface dressing on new surface in two coats with bitumen of grade VG

-10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum
of stone chippings 13.2 mm nominal size per 100 sqm of road surface
for first

SUB HEAD : 16 - ROAD WORK

Code
No.

16.27

16.28

Description

Unit

Rate `

coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone
chippings 11.2 mm nominal size per 100 sqm of road surface for second
coat, including consolidation of each coat separately with road roller of 6
to 8 tonne capacity etc. complete.

sqm

260.20

Surface dressing on old surface with hot bitumen of grade VG - 10 of

approved quality using 1.95 kg of bitumen per sqm with 1.50 cum of
stone chippings 11.2 mm nominal size per 100 sqm of road surface,
including
consolidation with road roller of 6 to 8 tonne capacity, etc. complete.

sqm

159.60

sqm

141.25

sqm

90.05

Surface dressing one coat on new surface with bitumen of specified

grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum of stone
chippings 13.2 mm nominal size per 100 sqm of road surface, including
consolidation with road roller of 6 to 8 tonne capacity , etc. complete :
16.28.1

16.29

Using bitumen emulsion (minimum 50% bitumen content-RS

grade conforming to IS : 8887)

Surface dressing one coat on old surface with bitumen of specified

grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone
chippings 11.2 mm nominal size per 100 sqm of road surface, including
consolidation with road roller of 6 to 8 tonne capacity etc. complete :
16.29.1

Using bitumen emulsion (minimum 50% bitumen content-RS

grade conforming to IS : 8887)

PREMIX CARPET
16.30

16.31

Providing and applying tack coat using hot straight run bitumen of grade
VG - 10, including heating the bitumen, spraying the bitumen with
mechanically operated spray unit fitted on bitumen boiler, cleaning and
preparing the existing road surface as per specifications :
16.30.1

On W.B.M. @ 0.75 Kg / sqm

sqm

53.75

16.30.2

On bituminous surface @ 0.50 Kg /

sqm

sqm

38.75

16.31.1.1 On W.B.M / W.M.M. @ 0.4kg/sqm

sqm

15.30

16.31.1.2 On bituminous surface @

0.25kg/sqm

sqm

10.10

sqm

19.70

Providing and applying tack coat using bitumen emulsion conforming to

IS: 8887, using emulsion pressure distributer including preparing the
surface & cleaning with mechanical broom.
16.31.1

16.31.2

With rapid setting bitumen emulsion

With medium setting bitumen emulsion

16.31.2.1 On W.B.M / W.M.M. @ 0.4kg/sqm

16.31.2.2 On bituminous surface @ 0.25kg/sqm

sqm
12.85

Note : Use of item no. 16.31.1 shall be restricted only for sites at sub
zero temperature or for emergency applications.
16.32

2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone
chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm
and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2
mm and 11.2 mm size respectively, including a tack coat with hot

straight run bitumen, including consolidation with road roller of 6 to 9

tonne capacity etc. complete (tack coat to be paid for separately).
SUB HEAD : 16 - ROAD WORK

259

Code No.

Description

16.32.1
16.32.2

Unit

With paving Asphalt grade VG - 10 heated and then mixed

with solvent at the rate of 70 grams per kg of asphalt

sqm

173.25 With paving Asphalt grade VG - 30 with no solvent

sqm
154.25

16.32.3
With Refinery Modified Bitumen CRMB 55 conforming to
IRC: SP: 53
16.33

sqm

176.70

With paving Asphalt grade VG - 10 heated and then mixed

with solvent at the rate of 70 grams per kg of asphalt

sqm

211.60

16.33.2

With paving Asphalt grade VG - 30 with no solvent

sqm

187.85

16.33.3

With Refinery Modified Bitumen CRMB 55 conforming to

2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone
chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and
52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm
and 11.2 mm size respectively, including a tack coat with hot straight
run bitumen, including consolidation with road roller of 6 to 9 tonne
capacity etc. complete (tack coat to be paid for separately).
16.33.1

IRC: SP: 53
16.34

16.35

Rate `

sqm

215.95

2 cm premix carpet surfacing with 2.4 cum of stone chippings 11.2 mm

nominal size per 100 sqm and bitumen emulsion (medium setting min.
65% bitumen content) complying with IS : 8887, using 96 kg per cum of
chippings, including consolidation with road roller of 6 to 9 tonne
capacity
etc. complete.

sqm

164.35

2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm

nominal size per 100 sqm and bitumen emulsion (medium setting min.
65% bitumen contents) complying with IS : 8887, using 96 kg per cum of
chippings of road surface, including consolidation with road roller etc.
complete.

sqm

200.60

sqm

455.85

sqm

649.05

16.36

Providing and laying Bitumen Penetration Macadam with hard stone

aggregate of quality, size and grading as specified, with bitumen of
suitable penetration grade, including required key aggregate as specified,
spreading coarse aggregate with the help of self propelled/ tipper tail
mounted aggregate spreader and applying bitumen by a pressure
distributor and then spreading key aggregate with the help of aggregate
spreader complete, including consolidation with road roller of minimum 8
to 10 tonne capacity to achieve specified values of compaction and
surface accuracy :
16.36.1
For 50mm compacted thickness using coarse aggregate of
size 50-20 mm graded @ 0.60 cum per 10 sqm key
aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm.
With paving
16.36.2 asphalt grade VG - 10 @ 50 kg/ 10 sqm.
For 75 mm compacted thickness in two layers using stone
aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm
key aggregate of size 20.0 mm graded @ 0.18 cum per 10
sqm.
With paving asphalt grade VG - 10 @ 68 kg/10 sqm.
MASTIC AND BITUMASTIC WEARING COURSE
16.37

Providing and laying bitumen mastic wearing course (as per

specifications) with industrial bitumen of grade 85/25 conforming to IS :

702, prepared by using mastic cooker and laid to required level and
slope, including providing antiskid surface with bitumen precoated fine
grained hard stone chipping of approved size at the rate of 0.005 cum
per 10 sqm and at approximate

260

SUB HEAD : 16 - ROAD WORK

Code No.

16.38

16.39

Description

spacing of 10 cm centre to centre in both directions, pressed into

surface protruding 1 mm to 4 mm over mastic surface, including cleaning
the surface, removal of debris etc. all complete. (Considering bitumen
using 10.2% as per MORTH specification).
16.37.1 25 mm thick
16.37.2 40 mm thick
2.5 cm thick bitumastic sheet with hot bitumen of approved quality,
using stone chippings (60% with 12.5 mm nominal size and 40% with
10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand @ 1.65
cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of
stone chippings and @ 128 kg/cum of sand over a tack coat with hot
straight run bitumen, including consolidation with road roller of 8 to 10
tonne etc. complete. (tack coat to be paid separately) :
16.38.1 With paving Asphalt grade VG - 10 heated and then mixed
with solvent at the rate of 70 grams per kg of asphalt
16.38.2 With paving Asphalt grade VG - 30
16.38.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC:
SP : 53
4 cm thick bitumastic sheet with hot bitumen of approved quality, using
stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm
nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum
per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone
chippings and @ 128 kg/cum of sand over a tack coat with hot straight
run bitumen, including consolidation with road roller of 8 to 10 tonne
etc. complete. (tack coat to be paid separately) :
16.39.1 With paving Asphalt grade VG - 10 heated and then mixed
with solvent at the rate of 70 grams per kg of asphalt
16.39.2 With paving asphalt grade VG - 30 with no solvent
16.39.3

With Refinery Modified Bitumen CRMB 55 conforming to

IRC: SP : 53

Unit

Rate `

sqm
sqm

962.45
1539.95

sqm
sqm

289.60
249.65

sqm

296.90

sqm
sqm

445.75
382.60

sqm

457.30

SEAL COAT
16.40

16.41

Providing and laying seal coat of premixed fine aggregate ( passing 2.36
mm and retained on 180 micron sieve) with bitumen using 128 kg of
bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60
cum of fine aggregate per 100 sqm of road surface, including rolling and
finishing with road roller all complete.

sqm

Providing and laying seal coat over prepared surface of road with
bitumen heated in bitumen boiler fitted with the spray set spraying using
98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum
of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and
retained on 2.36 mm sieve) per 100 sqm of road surface, including
rolling and finishing
with power road roller all complete.

sqm

Note : Seal coat items to be operated only with the prior approval of
Chief Engineer concerned.
CONCRETE PAVEMENT
16.42

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 40 mm nominal size) in pavements, laid to required slope
and camber in panels as required including consolidation finishing and
tamping
complete.

cum

100.35
77.10

5450.45
SUB HEAD : 16 - ROAD WORK

261

Code
No.

Description

16.43

Unit

Rate `

cum

6,795.00

cum

7143.45

cum

234.05

cum

489.00

litre

46.45

Providing and laying design mix cement concrete of M-30 grade, in

roads/ taxi tracks/ runways, using cement content as per design mix,
using coarse sand and graded stone aggregate of 40 mm nominal size
in appropriate proportions as per approved & specified design criteria,
providing dowel bars with sleeve/ tie bars wherever required, laying at
site, spreading and compacting mechanically by using needle and
surface vibrators, levelling to required slope/ camber, finishing with
required texture, including steel form work with sturdy M.S. channel
sections, curing, making provision for contraction/ expansion,
construction & longitudinal joints ( 10 mm wide x 50 mm deep) by
groove cutting machine, providing and filling joints with approved joint
filler and sealants, complete all as per direction of Engineer-in-charge
(Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid
separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/
less cement used as per design mix is payable/ recoverable separately.
16.43.1
16.43.2

16.43A

Cement concrete prepared with batch mixing machine

Cement concrete manufactured in automatic batching
plant (RMC plant) i/c transportation to site in transit mixer

Annexure A to Item number

16.43 16.43B

Annexure B to Item
number 16.43

16.44

Extra for providing and mixing hardening compound of approved

quality as per manufacturers specification in cement concrete.

16.45

Providing and fixing in position pre-moulded joint filler in

expansion joints.

16.46

Providing and laying in position bitumen hot sealing compound for

expansion joints etc.
16.46.1

Using grade A sealing compound. per cm

per cm depth
per cm width
per m length

2.45

depth
per cm width
per m length

2.05

PAINTING ROAD / RUNWAY MARKING

16.47

Painting runway/taxi track/apron marking with adequate nos of coats to

give uniform finish with road marking paint of superior make as
approved by the Engineer-in-charge, i/c cleaning the surface of all dirt,
scales, oil, grease and other foreign material etc. and lining out
complete.
16.47.1
16.47.2

New work (Two or more

coats)

sqm

109.30

sqm

68.50

sqm

122.15

sqm

79.60

Old work (One or more coats)

16.48

Painting road surface marking with adequate nos of coats to give

uniform finish with ready mixed road marking paint conforming to IS :
164, on bituminous surface in white/yellow shade, including cleaning the
surface of all dirt, scales, oil, grease and foreign material etc. complete.
16.48.1
16.48.2

New work (Two or more

coats)
Old work (One or more coats)

MISCELLANEOUS

262

SUB HEAD : 16 - ROAD WORK

Code
No.

16.49

16.50

Description

Unit

Making bell mouth opening/ entrance of size 100x50x50 cm for

drainage pipe under footpath, including providing cement concrete 1:3:6
(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size) for shape of bell mouth, including plastering providing and fixing
precast R.C.C./
S.F.R.C. slab including plastering with cement mortar 1:3
(1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the
slab & bell mouth including centring, shuttering & neat cement punning
inside the bell mouth etc. all complete.

each

Providing and fixing Glow studs of size 100x20 mm made of heavy duty
body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High
impact polystyrene) or ABS having electronically welded microprismatic lens with abrasion resistant coating as approved by Engineer
in charge. The glow stud shall support a load of 13635 kg tested in
accordance with ASTM D4280. The slope of retro- reflective surface shall
be 35 (+/-5) degress to base .The reflective panels on both sides with at
least 12 cm of reflective area up each side. The luminance intensity
should be as per the specification and shall be tested as
described in ASTM I: 809 as recommended in BS: 873 part 4 :
1973. The studs shall be fixed to the Road surface using the adhesive
conforming to IS, as per procedure recommended by the
manufacturer complete and as per direction of
Engineer-in-charge.

Rate `

1807.85

243.00
each

16.51
Preparation of sub-base road pavement with commercial dry lime
(slaked), fly ash stabilised soil with a mix of 3% lime, 12% fly ash and 85% local
suitable soil by weight, so as to achieve minimum field C.B.R. of 20,
including mixing, rolling with road roller curing etc. all complete.
16.51.1
16.52

Minimum thickness 15 cm

cum

Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime:
2 fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size), including finishing with 10mm thick cement mortar 1:3 (1 cement :
3 coarse sand) in foot paths, including preparation of sub grade with a
hand rammer, laying 10 mm thick leveling course of fine sand (jamuna
sand) and filling the joints with fine sand.

cum

16.52X

Sub Analysis X for sub analysis item Number 16.52Y

cum

16.52Y

Sub Analysis Y for Item Number 16.52

cum

16.53

Providing and fixing concertina coil fencing with punched tape

concertina coil 600 mm dia 10 metre openable length ( total length 90
m), having 50 nos rounds per 6 metre length, upto 3 m height of wall
with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and
with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I.
staples and G.I. clips to retain horizontal, including necessary bolts or
G.I. barbed wire tied to angle iron, all complete as per direction of
Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core
(2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape
(0.52 mm thick) and weight 43.478 gm/ metre
(cost of M.S. angle, C.C. blocks shall be paid separately)

metre

664.20
16.54
Providing and
laying Dense
Graded
Bituminous
Macadam
using crushed

6537.00
2008.60
2625.95
287.05

SUB HEAD : 16 - ROAD WORK

263

Code No.

Description

Unit

Rate `

stone aggregates of specified grading, premixed with bituminous binder

and filler, transporting the hot mix to work site by tippers, laying with
paver finisher equiped with electronic sensor to the required grade,
level and alignment and rolling with smooth wheeled, vibratory and
tandem rollers as per specifications to achieve the desired compaction
and density, complete as per specificatons and directions of Engineerin-Charge.
16.54.1

16.54.2

50 to 100 mm average compacted thickness with bitumen of

grade VG-30 @5% (percentage by weight of total mix) and
lime filler @ 2% (percentage by weight of Aggregate)
prepared
in Batch Type Hot Mix Plant of 100-120 TPH capacity.
50 to 100 mm average compacted thickness with bitumen of
grade VG-30 @5% (percentage by weight of total mix) and
lime filler @ 2% (percentage by weight of Aggregate)
prepared
in Drum Type Hot Mix Plant of 60-90 TPH capacity.

16.55

8790.95
cum
8555.10

cum

Providing and laying bituminous macadam using crushed stone

aggregates of specified grading premixed with bituminous binder,
transported to site by tippers, laid over a previously prepared surface
with paver finisher equiped with electronic sensor to the required grade,
level and alignment and rolling with smooth wheeled, vibratory and
tandem rollers as per specifications to achieve the desired compaction
and density, complete as per specificatons and directions of Engineer-inCharge.
16.55.1

50 to 100 mm average compacted thickness with bitumen of

grade VG-30 @ 3.5 0% (percentage by weight of total mix)

6742.35

prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. cum
16.55.2

50 to 100 mm average compacted thickness with bitumen of

grade VG-30 @3.50% (percentage by weight of total mix)
prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

16.56

6517.95
cum

Providing and laying semi- dense Bituminous concrete using crushed

stone aggregates of specified grading, premixed with bituminous binder
and filler, transporting the hot mix to work site by tippers, laying with
paver finisher equiped with electronic sensor to the required grade, level
and alignment and rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction and density as per
specification, complete and as per directions of Engineer-in-Charge.
16.56.1

16.56.2

25 mm compacted thickness with bitumen of grade VG- 30

@5% (percentage by weight of total mix) and lime filler @
2% (percentage by weight of Aggregate) prepared in Batch
Type
Hot Mix Plant of 100-120 TPH capacity.
25 mm compacted thickness with bitumen of grade VG- 30
@5% (percentage by weight of total mix) and lime filler @
2% (percentage by weight of Aggregate) prepared in Drum

sqm

220.50

T
y
16.57

264

pe
Hot Mix Plant of 60-90 TPH capacity.

sqm

214.60

Providing and laying Bituminous concrete using crushed stone

aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site by tippers, laying with paver
finisher equiped with electronic sensor to the required grade, level and
alignment and rolling with
SUB HEAD : 16 - ROAD WORK

Code No.

Description

Unit

Rate `

smooth wheeled, vibratory and tandem rollers to achieve the desired

compaction and density as per specification, complete and as per
directions of Engineer-in-Charge.
16.57.1

16.57.2

16.57.3

16.57.4

16.57.5

16.57.6

16.57.7

16.57.8

16.58
Deleted.

16.59

40/50 mm compacted thickness with bitumen of grade VG-30

@5.5% (percentage by weight of total mix) and lime filler @
3% (percentage by weight of Aggregate) prepared in Batch
Type Hot Mix Plant of 100-120 TPH capacity.

cum

40/50 mm compacted thickness with bitumen of grade VG-30

@5.5% (percentage by weight of total mix) and lime filler @
3% (percentage by weight of Aggregate) and waste plastic
additive @8% (percentage by weight of bitumen) prepared in
Batch Type Hot Mix Plant of 100- 120 TPH capacity.

cum

40/50 mm compacted thickness with bitumen of grade PMB40 @5.5% (percentage by weight of total mix) and lime filler
@ 3% (percentage by weight of Aggregate) prepared in
Batch
Type Hot Mix Plant of 100-120 TPH capacity.
40/50 mm compacted thickness with bitumen of grade
CRMB-60 @5.5% (percentage by weight of total mix) and
lime filler @ 3% (percentage by weight of Aggregate)
prepared in Batch
Type Hot Mix Plant of 100-120 TPH capacity.
40/50 mm compacted thickness with bitumen of grade VG-30
@5.5% (percentage by weight of total mix) and lime filler @
3% (percentage by weight of Aggregate) prepared in drum
Type
Hot Mix Plant of 60-90 TPH capacity.

9597.65

10079.30

12306.80
cum
11365.70
cum
9356.85

cum

40/50 mm compacted thickness with bitumen of grade VG-30

@5.5% (percentage by weight of total mix) and lime filler @
3% (percentage by weight of Aggregate) and waste plastic
additive @8% (percentage by weight of bitumen) prepared in
drum Type Hot Mix Plant of 60-90 TPH capacity.

cum

40/50 mm compacted thickness with bitumen of grade PMB40 @5.5% (percentage by weight of total mix) and lime filler
@ 3% (percentage by weight of Aggregate) prepared in drum
Type
Hot Mix Plant of 60-90 TPH capacity.

cum

40/50 mm compacted thickness with bitumen of grade

CRMB-60 @5.5% (percentage by weight of total mix) and
lime filler @ 3% (percentage by weight of Aggregate)
prepared in Drum
Type Hot Mix Plant of 60-90 TPH capacity.

cum

Manufacturing, supplying and fixing retro reflective sign boards made up

of 2 mm thick aluminium sheet, face to be fully covered with high
intensity encapsulated type heat activated retro reflective sheeting
conforming to type - IV of ASTM-D 4956-01 in blue and silver white
or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on
substrate by an adhesive backing which shall be activated by applying

9838.50

12066.00

11124.90

heat and pressure conforming to class -2 of ASTM-D-4956-01 and

fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c
to back support frame of M.S. angle
SUB HEAD : 16 - ROAD WORK

265

Code No.

Description

Unit

Rate `

iron of size 25x25x3 mm along with theft resistant measures, mounted

and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post
made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate
of size 100x100x5 mm at the bottom end and including making holes
in pipes, angles flats, providing & fixing M.S. message plate of required
size, steel work to be painted with two or more coats of synthetic
enamel paint of required shade and of approved brand & manufacture
over priming coat of zinc chromate yellow primer (vertical MS-Tee
support to be painted in black and white colours).Backside of aluminium
sheet to be painted with two or more coats of epoxy paint over and
including appropriate priming coat including all leads and lifts etc.
complete as per drawing , specification and direction of Engineerincharge.
16.59.1
16.59.2

16.60

sqm

4912.35

Cautionary /warning sign boards of equilateral triangular shape

having each side of 900 mm with support length of 3650 mm

sqm

3587.20

Manufacturing, supplying and fixing retro reflective overhead signage

boards made up of 2 mm thick aluminium sheet, face to be fully covered
with high intensity and encapsulated lens type heat activated retro
reflective sheeting conforming to type - III of ASTM-D-4956-01 as
approved by Engineer-in-charge, letters, borders etc. as per IRC : 672001 in silver white with blue colour back ground and with high intensity
grade, pasted on substrate by pressure sensitive adhesive backing
which shall be activated by applying pressure conforming to class II of
ASTM-D-4956-01 and fixing the same to the plate of structural frame
work by means of suitable sized aluminium alloys, rivets or bolts &
nuts @ 300 mm centre to centre all along the periphery as well as in
two vertical rows along with theft resistant measures, including the cost
of painting with two or more coats of epoxy paint in grey colour on the
back side of aluminium sheet including appropriate priming coat. The
rate includes the cost of rounding off the corners, lowering down the
structural frame work from the gantry, fixing and erecting the same in
position all complete as per drawings, specification and direction of the
engineer-in-charge.(Structural frame work including M.S. plate to be
provided separately. Rectangular area of the sheet only shall be
measured for payment).
16.60.1

16.61

Mandatory/ Regulatory sign boards of 900 mm diametre with

support length of 3750 mm

Overhead informatory road signage

Providing Retro-reflective regulatory sign board of size 900 mm dia

meter made out of 2 mm thick aluminium sheet, face to be fully covered
with high intensity encapsulated lens type retro -reflective sheeting as
approved by Engineer-in-charge . Letter, symbols, borders etc. will be
as per IRC - 67 with required colour scheme on the boards and with
the high intensity grade A. The aluminium sheet to be riveted to M.S.
frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1
No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m
long welded to the frame with adequate anti-theft arrangement .Sheet
work to be painted with two or more coats of synthetic enamel paint
over an under coat (primer) and back side of aluminium sheet to be
painted with two or more coats of epoxy paint including appropriate
priming coat complete in all respects

sqm

4725.40

as per direction of Engineer-in-charge.

266

sqm

5441.30

SUB HEAD : 16 - ROAD WORK

Code
No.

Description

Unit

Rate `

Providing and applying 2.5 mm thick road marking strips (retroreflective)

of specified shade/ colour using hot thermoplastic material by fully/
semi automatic thermoplastic paint applicator machine fitted with profile
shoe, glass beads dispenser, propane tank heater and profile shoe
heater, driven by experienced operator on road surface including
cost of material, labour,T&P, cleaning the road surface of all dirt,
seals, oil, grease and foreign material etc. complete as per direction of
Engineer-in-charge and
accordance with applicable specifications.

sqm

486.35

16.64

Providing, laying and making kerb channel 30 cm wide and 50 mm thick

with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone
aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40
mm nominal size, well rammed and consolidated and grouted with fine
sand, including finishing the top smooth etc. complete and as per
direction
of Engineer-in-charge.

sqm

354.20

16.65

Providing and laying 75 mm thick compacted bed of dry brick aggregate

of 40 mm thick nominal size including spreading, well ramming,
consolidating and grouting with jamuna sand, including finishing smooth
etc. complete as per direction of Engineer-in-charge.

sqm

120.60

Providing and fixing post delineators made of ABS round body fitted
with 2 nos 100 mm dia high reflective reflectors and mounted on MS
pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be
installed
as per direction of Engineer-in-charge.

each

561.30

each

16.70

16.62

16.63

16.66

Excavating holes upto 0.10 cum, including getting out the excavated
soil, then returning the soil as deported in layers not exceeding 20 cm in
depth, including consolidating and deposited layer by ramming
watering etc., disposing of surplus excavated soil as directed with in a
lead of 50 mm and lift upto 1.5 m.
16.66.1
16.67

16.68

16.69

All kind of soil

Providing and fixing at or near ground level factory made RCC

pavement slab of M-30 grade of size 450x450x50 mm, including
reinforcement with 6 mm dia M.S. bars 4 nos on each side, including
setting in position in footpath to the required level and line over a bed of
20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand),
having joint thickness not more than 5mm except on curve, including
filling of joints with same cement mortar and making grooves etc.
complete as per direction of Engineerin-charge.

sqm

Providing and laying 60mm thick factory made cement concrete

interlocking paver block of M -30 grade made by block making machine
with strong vibratory compaction, of approved size, design & shape, laid
in required colour and pattern over and including 50mm thick compacted
bed of coarse sand, filling the joints with fine sand etc. all complete as
per
the direction of Engineer-in-charge.

sqm

Providing and laying at or near ground level factory made kerb stone of
M-25 grade cement concrete in position to the required line, level and
curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),
including making joints with or without grooves (thickness of joints
except at sharp curve shall not to more than 5mm), including making

draina
ge
openin
g
where
ver
requir
ed
compl
ete
etc. as
per
directi
on of
Engin
eer-incharg
e
(lengt
h of
finishe
d kerb

edging shall be measured for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

cum

643.45

602.20

5295.90
SUB HEAD : 16 - ROAD WORK

267

Code
No.

16.70

Description

Unit

Rate `

sqm

544.10

sqm

577.05

Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 25x25 mm made of G.I. wire of dia 3 mm including
strengthening with 2 mm dia wire or nuts, bolts and washers as
required complete as
per the direction of Engineer-in-charge.

sqm

644.10

Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at
site.

cum

668.20

Dry stone pitching 22.5 cm thick laid in courses and required profile with
hammer dressed stones having no side less than 15 cm, with minimum
depth of 20 cm including preparing the bedding surface etc. all
complete.
(Payment for Stone to be made separately).

sqm

249.70

Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or
nuts, bolts and washers as required complete as per the direction of
Engineer-in-charge.
16.70.1
16.70.2

16.71

16.72
16.73

16.74

Made of G.I. wire of dia 4 mm

Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer
dia not less than 5 mm in required colour and shade

75 mm thick back filling for pitching including supplying of required

materials and consolidation etc. complete with :
16.74.1

Moorum

16.74.2

Stone aggregate 20 mm nominal

size

16.74.3

Stone aggregate 40 mm nominal

size
16.75

Providing and laying C.C. pavement of mix M-25 with ready mixed
concrete from batching plant. The ready mixed concrete shall be laid
and finished with screed board vibrator , vacuum dewatering process
and finally finished by floating, brooming with wire brush etc. complete
as per specifications and directions of Engineer-incharge. (The panel
shuttering work shall be
aid for separately).

sqm
55.30 sqm
120.00
sqm

6848.85
cum

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/ recoverable
separately).
16.76
16.77

16.78

206.50

Deduct for using of M-20 grade concrete instead of M-25 grade concrete
in C.C. pavement.

cum

Scarifying the existing bituminous road surface to a depth of 50 mm and

disposal of scarified material within all lifts and lead upto 1km (by mechanical means).

sqm

Construction of granular sub-base by providing close graded Material

conforming to specifications, mixing in a mechanical mix plant at OMC,
carriage of mixed material by tippers to work site, for all leads & lifts,
spreading in uniform layers of specified thickness with motor grader on
prepared surface and compacting with vibratory power roller to achieve
the desired density, complete as per specifications and directions of
Engineer-in-Charge.
16.78.1

109.95

3.15

16.78.2

268

With material conforming to Grade-I (size range 75 mm to 0.075

mm) having CBR Value-30
cum

2119.90

With material conforming to Grade-II (size range 53 mm to

0.075 mm ) having CBR Value-25

2124.85
cum

SUB HEAD : 16 - ROAD WORK

Code No.

Description

16.78.3
16.79

16.80

16.81

With material conforming to Grade-III (size range 26.5 mm to

0.075 mm ) having CBR Value-20

Providing, laying, spreading and compacting graded stone aggregate

(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)
specification including premixing the material with water at OMC in for
all leads & lifts, laying in uniform layers with mechanical paverfinisher in
sub- base / base course on well prepared surface and compacting with
vibratory roller of 8 to 10 tonne capacity to achievethe desired density,
complete as per specifications and directions of Engineer-in-Charge.
Construction of dry lean cement concrete sub base over a prepared
sub-grade with coarse and fine aggregate conforming to IS:383, the
size of coarse aggregate not exceeding 25 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as per
specifications, cement content not to be less than 150 Kg/cum, optimum
moisture content to be determined during trial length construction,
concrete strength not to be less than 10 Mpa at 7 days, mixed in a
batching plant, transported to site, for all leads & lifts, laid with a
mechanical paver, compacting with 8-10 tonne vibratory roller, finishing
and curing etc. complete as per direction
of Engineer-incharge.

Unit

Rate `

cum

2127.65

cum.

cum

Providing and erecting 2.00 metre high temporary barricading at site as

per drawing/ direction of Engineer-in-Charge which includes writing and
painting, arrangement for traffic diversion such as traffic signals during
construction at site for day and night, glow lamps, reflective signs,
marking, flags, caution tape as directed by the Engineer-in- Charge. The
barricading provided shall be retained in position at site continuously i/c
shifting of barricading from one location to another location as many
times as required during the execution of the entire work till its
completion. Rate include its maintenance for damages, painting, all
incidentals, labour materials, equipments and works required to execute
the job. The barricading shall not be removed without prior approval of
Engineer-in-Charge.
(Note :- One time payment shall be made for providing barricading from
start of work till completion of work i/c shifting. The barricading provided
shall remain to be the property of the contractor on completion of the
work).
16.81X
metre 16.81Y

metre

Sub analysis item for material component of Item No. 16.81

Sub analysis item for fabrication charges of Item No. 16.81
metre

16.82

16.83

Taking out existing kerb stones of all types from footpath/ central verge,
including removal of mortar etc., disposal of unserviceable material to
the dumping ground, for which payment shall be made separately and
stacking of serviceable material within 50 metre lead as per direction of
Engineerin-Charge.
Taking out existing CC interlocking paver blocks from footpath/ central
verge, including removal of rubbish etc., disposal of unserviceable
material to the dumping ground, for which payment shall be made
separately and stacking of serviceable material within 50 metre lead as
per direction of

En
gi
ne
erinCh
ar
ge
.
sq
m

metre

Layin
g old
ceme
nt
cocre
te
interl
ockin
g
paver
block
s of
any
desig
n/
shap
e laid
in
requir
ed
line,
level,
curva
ture,
colou
r and
patter
n
over
and
includ
ing
50
mm
thick
comp
acted
bed
of
coars

e sand, filling the joints with fine sand

2119.75

3291.55

1467.00
42.20
836.70

14.35

48.30
SUB HEAD : 16 - ROAD WORK

269

Code
No.

16.85

16.86

Description

Unit

Rate `

etc. all complete as per the direction of Engineerin-charge. (Old CC

paver blocks shall be supplied by the department free of cost).

sqm

195.70

Laying at or near ground level old kerb stones of all types in position to
the required line, level and curvature, jointed with cement mortar 1:3 (1
cement : 3 coarse sand), including making joints with or without grooves
(thickness of joints, except at sharp curve, shall not be more than 5
mm), including making drainage opening wherever required etc.
complete as per direction of Engineer-in-charge. (Length of finished
kerb edging shall be measured for payment). (Old kerb stones shall
be supplied by the
department free of cost)

metre

44.30

Providing and laying gang saw cut 18 mm thick, mirror polished pre
moulded and pre polished machine cut granite stone of required size
and shape of approved shade, colour and texture in footpath, flooring cut
granite stone of required size and shape of approved shade, colour and
texture in footpath, flooring in road side plazas and similar locations,
laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse
sand) including grouting the joints with white cement mixed with
matching pigment, epoxy touch ups etc. complete as per direction of
Engineer-in-Charge.
16.86.1

16.87

16.89

16.90

sqm

3148.55

sqm

3636.40

Providing and laying gang saw cut 30 mm thick, mirror polished pre
moulded and pre polished machine cut granite stone of required size
and shape o f approved shade, colour and texture in footpath, flooring in
road side plazas and similar locations, laid over 20mm thick base of
cement mortar 1:4 (1cement : 4 coarse sand) including grouting the
joints with white cement mixed with matching pigment, epoxy touch
ups etc. complete as per direction of Engineer-in-Charge.
16.87.1

16.88

Area less than 0.50 sqm.

Area less than 0.50 sqm.

Providing and laying matt finished vitrified tile of size 100x100x16mm

having water absorption less than 0.5% and conforming to IS: 15622 of
approved make in all colours and shades in out door floors such as
footpath, court yard multi models etc., laid on 20mm thick base of
cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns
including grouting the joints with white cement mixed with matching
pigments etc. complete as
direction of Engineer-in-Charge.

sqm

Providing and laying matt finished vitrified tile of size 300x300x9.8mm

having with water absorption less than 0.5% and conforming to IS:
15622 of approved make in all colours and shades in for outdoor floors
such as footpath, court yard, multi modals location etc., laid on 20mm
thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes
& patterns including grouting the joints with white cement mixed with
matching pigments etc. complete
as per direction of Engineer-in-Charge.

sqm

Providing and laying tactile tile (for vision impaired persons as per
standards) of size 300x300x9.8mm having with water absorption less
than 0.5% and conforming to IS: 15622 of approved make in all colours
and shades in for outdoor floors such as footpath, court yard, multi
modals location etc., laid on 20mm thick base of cement mortar 1:4
(1cement : 4 coarse sand) in all shapes & patterns including grouting
the joints with white cement mixed with matching pigments etc.
complete as per direction

of
E
n
gi
ne
er
inC
h
ar
ge
.
sq
m

986.35

1474.20

1439.35

270

SUB HEAD : 16 - ROAD WORK

Code
No.

16.91

16.92

16.93

16.94

Description

Unit

Providing and laying factory made coloured chamfered edge Cement

Concrete paver blocks of required strength, thickness & size/shape,
made by table vibratory method using PU mould, laid in required colour
& pattern over 50mm thick compacted bed of fine sand, compacting
and proper embedding/laying of inter locking paver blocks into the sand
bedding layer through vibratory compaction by using plate vibrator,
filling the joints with jamuna sand and cutting of paver blocks as per
required size and pattern, finishing and sweeping extra sand in
footpath, parks, lawns, drive ways or light traffic parking etc. complete
as per manufacturers specifications & direction of Engineerin-Charge.
60mm thick C.C. paver block of M-35
grade with approved colour, design & pattern.

sqm

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and
chisel dressed on top, for paving in floors, drains etc. laid over 20mm
thick base mortar 1:4 (1cement:4 coarse sand) with joints 10mm wide
filled with same mortar including ruled pointing etc. complete as per
direction of engineer-in charge.

sqm

Providing and placing in position 100mm thick factory made machine

batched & machine mixed Precast RCC Rectangular Covers on drains
of footpath of various sizes,of M-25 grade cement concrete for RCC
work, including cost of centering, shuttering, reinforcement of 8mm dia
TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways ,
neat cement punning on finished surface, properly encased on all
edges with 1.6 mm thick , 100mm wide MS sheet duly painted over
priming coat , reinforcement to be welded at edges with MS sheet and
providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all
leads & lift, handling at site etc. all
complete as per direction of Engineer-in-Charge.
Providing and laying factory made chamfered edge Cement Concrete
paver blocks of required strength, thickness & size/shape, made by
table vibratory method, to attain superior smooth finish using PU or
equivalent moulds, laid in required Grey colour & pattern over 50mm
thick compacted bed of coarse sand, compacting and proper
embedding / laying of inter locking paver blocks into the sand bedding
layer through vibratory compaction by using plate vibrator, filling the
joints with jamuna sand and cutting of paver blocks as per required size
and pattern, finishing and sweeping extra sand in footpath, parks,
lawns, drive ways or light traffic parking etc. all complete as per
manufacturers specifications & direction of Engineer -in-Charge: (a) 80
mm thick c.c. paver block of M-30 grade with approved color design
and pattern.

Rate `

740.35

1375.20

2090.30
sqm

737.70
sqm

SUB HEAD : 16 - ROAD WORK

271

272

SUB-HEAD : 17.0

SANITARY INSTALLATIONS

273

274

BASIC RATES (SH: 17.0 SANITARY INSTALLATIONS)

Code
No.

0100
0101
0103
011
2
011
4
011
5
011
6
011
7
0123
0124
0128
0131
0295
0297
0367
0586
0588
0828
0830
0834
0982
1007
1309
1315
1330
1331
1332
1334
1335
1350
1363
1369
1373
1374
1392
1396
1397
1532
1533
1534

1535

Descript
ion

B
a
n
d
h
a
n
i
B
h
i
s
t
i
B
l
a
c
k
s
m
i
t
h
2
n
d
c
l
a
s
s
C
a
r
p
e
n
t
e
r

2
n
d
c
l
a
s
s
B
e
l
d
a
r
Coolie
Fitter (grade
1)
A
s
s
i
s
t
a
n
t
F
i
t
t
e
r
o
r
2
n
d
c
l
a
s
s

F
i
t
t
e
r
M
a
s
o
n
(
b
r
i
c
k
l
a
y
e
r
)
1
s
t
c
l
a
s
s

ick layer) 2nd class Mate

Painter
Stone Aggregate (Single size) : 20 mm nominal
size Stone Aggregate (Single size) : 10 mm
nominal size Portland Cement
Chromium plated Brass screws 40 mm
Chromium plated Brass screws 25 mm
Anticorrosive bituminous paint (black)
Enamel paint
Synthetic enamel paint in all shades except black or chocolate shade
Coarse sand (zone III)
Structural steel such as tees, angles channels and R.S. joists
C.I. bracket for wash basin and sinks
C.P.brass chain with 40 mm dia rubber plug
Clamps and M.S. stays including bolts and nuts for 100 mm pipe
M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe
M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe
Clamps and M.S. stays including bolts and nuts for 50 mm pipe
Clamps and M.S. stays including bolts and nuts for 75 mm pipe
Mosquito proof coupling of approved design
Vitreous china foot rests 250x130x30 mm
S.C.I. gully or nahani grating 100 mm dia
Rubber insertions for 80 mm dia pipe joints
Rubber insertions for 100 mm dia pipe
joints Mirror of superior make glass 60x45
cm Vitreous china pedestal for wash basin
Pig lead
Flush pipe with union spreaders and clamps all in C.P. brass
for single stall
Flush pipe with union spreaders and clamps all in C.P. brass for
double stall
Flush pipe with union spreaders and clamps all in C.P. brass for
range of three stall
Flush pipe with union spreaders and clamps all in C.P. brass for
range of four stall

M
a
s
o
n
(
b
r

SUB HEAD : 17 - SANITARY INSTALLATIONS

Unit

Rate `

day
day
day
day
day
day
day
day
day
day
day
day
cum
cum
tonne
100 Nos
100 Nos
litre
litre
litre
cum
quintal
pair
each
each
each
each
each
each
each
pair
each
each
each
each
each
kilogram

363.00
363.00
399.00
399.00
329.00
329.00
435.00
399.00
435.00
399.00
363.00
399.00
1175.00
1175.00
6300.00
220.00
125.00
115.00
210.00
160.00
1200.00
4636.00
70.00
40.00
35.00
20.00
18.00
28.00
30.00
30.00
100.00
18.00
15.00
18.00
310.00
700.00
90.00

each

270.00

each

400.00

each

520.00

each

600.00

275

Code
No.

1540
1541
1542
1543
1614
1616
1617
1620
1621
1624
1625
1627
1628
1630
1631
1633
1634
1636
1637
1639
1640
1653
1656
1659
1662
1666
1667
1669
1670
1672
1673
1674
1677
1682
1683
1685
1686
1863

Description

Unit

Rate `

Flush pipe and spreaders G.l. for single set of one squatting plate urinal
Flush pipe and spreaders G.l. for range of two squatting plates urinal
Flush pipe and spreaders G.l. for range of three squatting plates urinal
Flush pipe and spreaders G.l. for range of four squatting plates urinal
G.I. inlet connection
S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
75 mm dia
S.C. I. soil, waste and vent single socketed pipe 1.80 metres long:
100 mm dia
S.C.I. plain bend 75 mm dia
S.C.I. plain bend 100 mm dia
S.C.I. bend with access door 75 mm dia
S.C.I. bend with access door 100 mm dia
S.C.I. plain single equal junctions 75x75x75 mm dia
S.C.I. plain single equal junctions 100x100x100 mm dia
S.C.I. single equal junctions 75x75x75 mm dia with access door
S.C.I. single equal junctions 100x100x100 mm dia with access door
S.C.I. plain double equal junctions 75x75x75x75 mm dia
S.C.I. plain double equal junctions 100x100x100x100 mm dia
S.C.I. double equal junctions 75x75x75x75 mm dia with access door
S.C.I. double equal junctions 100x100x100x100 mm dia with
access door
Slotted cowl (terminal guard ) 75 mm dia
Slotted cowl (terminal guard) 100 mm dia
Sand cast iron S&S plain single unequal junctions: 100x100x
75 mm dia
Sand cast iron S&S single unequal junctions: 100x100x75 mm dia
with access door
Sand cast iron S&S plain double unequal junctions: 100x100x75x
75 mm dia
Sand cast iron S&S double unequal junctions: 100x100x75x75 mm
dia with access door
Sand cast iron heel rest bend 75 mm dia
Sand cast iron heel rest bend 100 mm dia
S.C.I. single equal invert branch of required degree 75x75x75 mm dia
S.C.I. single equal invert branch of required degree 100x100x
100 mm dia
S.C.I. double equal invert branch of required degree 75x75x75x
75 mm dia
S.C.I. double equal invert branch of required degree 100x100x100x
100 mm dia
S.C.I. single unequal invert branch of required degree 100x100x
75 mm dia
S.C.I. double unequal invert branch of required degree 100x100x
75x75 mm dia
S.C.I.
door
pieces
75
mm
each
S.C.I.
door
pieces
100
mm
each
S.C.I.
collar
75
mm
each
S.C.I.
collar
100
mm
each
Fire clay kitchen sink: 600x450x250 mm

each
each
each
each
each

175.00
250.00
300.00
390.00
65.00

each

950.00

each
each
each
each
each
each
each
each
each
each
each
each

1150.00
170.00
350.00
200.00
252.00
265.00
450.00
278.00
376.00
346.00
520.00
425.00

each
each
each

550.00
151.00
190.00

each

370.00

each

400.00

each

550.00

each
each
each
each

550.00
220.00
250.00
320.00

each

410.00

each

410.00

each

550.00

each

495.00

each
dia
dia
dia
dia

570.00
275.00
400.00
113.00
143.00
1350.00

each

276

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code
No.

1871
1872
1875
1876
1881
1885
1889
1891
1893
1895
1896
1897
1898
1913
1915
1947
1949
1950
1951
1952
1953
1954
1955
1965

1970
2202
2203
2205
2209
3213
3228
3229
3617
3620
3621
3624
3625
3628
3629
3634
3635
3640

Description

White vitreous china laboratory sink 450x300x150

mm White vitreous china laboratory sink
600x450x200 mm
White plastic seat (solid) with lid C.P. brass hinges and rubber
buffers Black plastic seat (solid) with lid C.P. brass hinges and
rubber buffers Spun yarn
15 mm C.P. brass tap
C.P. brass toilet paper holder of standard size
C.I. trap for standard urinal with vent arm with operating and
other couplings in C.P. brass: 50 mm dia
C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 80 mm dia
C.P. brass trap 40 mm dia
100 mm S.C.I. trap with vent heel
100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet
100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet
Vitreous china lipped front urinal
Vitreous china squatting plate urinal
Vitreous china flat back wash basin 630x450 mm
Vitreous china angle back wash basin 600x480 mm
Vitreous china angle back wash basin 400x400 mm
C.P. brass waste 32 mm
C.P. brass waste 40 mm
Vitreous china Indian type W.C. pan size 580 mm
Vitreous china orrisa type W.C. pan size 580 mm
Vitreous china pedestal type water closet
White vitreous china dual purpose closet (Anglo Indian W.C.) suitable
for use as squatting pan or European type water closet as per manufacturers specifications
Vitreous china foot rests 250x125x25 mm
Carriage of stone aggregate below 40 mm nominal size
Carriage of coarse sand
Carriage of steel
Carriage of cement
Vitreous china Surgeon type wash basin of size 660x460 mm
600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size
Vitreous china flat back wash basin 550x400 mm
C.P. Brass union 40mm dia
C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres
long:100 mm dia
C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres
long:75 mm dia
S.C.I. S&S bends with access door 100 mm dia
S.C.I. S&S bends with access door 75 mm dia
S.C.I. S&S bend 100 mm dia
S.C.I. S&S bend 75 mm dia
S.C.I. S&S heel rest sanitary bend 100 mm dia
S.C.I. S&S heel rest sanitary bend 75 mm dia
S.C.I. S&S single equal junctions 100x100x100 mm

Unit

Rate `

each
each
each
each
kilogram
each
each

820.00
1525.00
330.00
310.00
50.00
250.00
225.00

each

170.00

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

225.00
250.00
315.00
275.00
218.00
460.00
1280.00
725.00
725.00
425.00
80.00
95.00
450.00
780.00
700.00

each

1300.00

pair
cum
cum
tonne
tonne
each

100.00
106.49
106.49
94.65
94.65
1100.00

each
each
each

250.00
550.00
195.00

each

1196.00

each
each
each
each
each
each
each
each

1035.00
290.00
240.00
265.00
195.00
296.00
250.00
472.00

SUB HEAD : 17 - SANITARY INSTALLATIONS

277

Code
No.

3641
3644
3645
3650
3651
3654
3655
3660
3664
3670
3674
3681
3682
3685
3686
3690
3695
3699
3707
3708
3712
3713
3716
3717
3728
3729
3733
3734
3738
3739
3746
3747
3749
4202
7004
7005
7006
7048
7072

Description

Unit

Rate `

S.C.I. S&S single equal junctions 75x75x75 mm

S.C.I. S&S single equal junctions with access door 100x100x
100 mm
S.C.I. S&S single equal junctions with access door 75x75x75 mm
S.C.I. S&S double equal junctions 100x100x100x100 mm
S.C.I. S&S double equal junctions 75x75x75x75 mm
S.C.I. S&S double equal junctions with access door 100x100x
100x100 mm
S.C.I. S&S double equal junctions with access door 75x75x75x
75 mm
S.C.I. S&S single unequal junctions 100x100x75 mm
S.C.I. S&S single unequal junctions with access door 100x100x
75 mm
S.C.I. S&S double unequal junctions 100x100x75x75 mm
S.C.I. S&S double unequal junctions with access door 100x100x
75x75 mm
S.C.I. S&S single equal invert branch of required degree 100x100x
100 mm dia
S.C.I. S&S single equal invert branch of required degree 75x75x
75 mm dia
S.C.I. S&S double equal invert branch of required degree 100
100x100x100 mm dia
S.C.I. S&S double equal invert branch of required degree 75x75x
75x75 mm dia
S.C.I. S&S single unequal invert branch of required degree 100x
100x75 mm dia
S.C.I. S&S double unequal invert branch of required degree 100x
100x75x75 mm dia
S.C.I. S&S, 75 mm offset for 75 mm dia pipe
S.C.I. S&S, 150 mm offset for 75 mm dia pipe
S.C.I. S&S, 150 mm offset for 100 mm dia pipe
S.C.I. S&S, 114 mm offset for 75 mm dia pipe
S.C.I. S&S, 114 mm offset for 100 mm dia pipe
S.C.I. S&S, 152 mm offset for 75 mm dia pipe
S.C.I. S&S, 152 mm offset for 100 mm dia pipe
S.C.I. S&S door pieces 100 mm dia
S.C.I. S&S door pieces 75 mm dia
S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm
S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm
S.C.I. S&S, collars 100 mm
S.C.I. S&S, collars 75 mm
S.C.I. S&S, 75 mm offset for 75 mm dia pipe
S.C.I. S&S, 75 mm offset for 100 mm dia pipe
Vitreous china toilet paper holder of standard size
Red oxide Zinc chromate primer
Vitreous china flat back wash basin 450x300 mm
Vitreous china 10 litres low level cistern without fittings
Vitreous china 10 litres low level cistern with fittings
Rawl plug 50 mm (designation 10 nos
Wall mounted water closet

each

330.00

each
each
each
each

495.00
373.00
620.00
462.00

each

615.00

each
each

480.00
570.00

each
each

640.00
800.00

each

850.00

each

425.00

each

323.00

each

530.00

each

425.00

each

545.00

each
each
each
each
each
each
each
each
each
each
each

725.00
225.00
285.00
390.00
300.00
383.00
358.00
465.00
400.00
295.00
350.00
each
300.00 each
250.00 each
170.00 each
218.00 each
363.00 each
150.00 litre
70.00 each
425.00 each
925.00 each
1600.00 each
10.00
each
4650.00

278

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code
No.

7073
7074
7075
7076
7095
7096
7097
7098
7101
7102
7103
7104
7105
7106
7107
7112
7113
7114
7115
7116
7117
7118
7119
7120
7123
7126
7127
7358
7359
7361
7363
7364

Description

Unit

Rate `

Adjustable Vetrious China Cistern with fittings

White Vetrious China Waterless Urinal
Cistern with fittings for Waterless Urinal
White Vetrious Urinal
Stainless steel kitchen sink - with drain board bowl depth 250 mm
Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl
depth 225 mm
Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl
depth 200 mm
Stainless steel kitchen sink - with drain board 510x1040 mm bowl
depth 178 mm
Stainless steel kitchen sink - without drain board 610x510 mm bowl
depth 200 mm
Stainless steel kitchen sink - without drain board 610x460 mm
bowl depth 200 mm
Stainless steel kitchen sink - without drain board 470x420 mm
bowl depth 178 mm
Coloured Orissa pattern W.C. pan 580x440 mm
Coloured Pedestal type W.C. pan 580x440 mm (European type)
Coloured Vitreous china 10 lit. low level cistern
Coloured (other than black) solid P.V.C. seat in European W.C. pan
Circular shape 450 mm dia Mirror with Plastic moulded frame
Rectangular shape 453x357 mm Mirror with Plastic moulded frame
Oval shape 450x350 mm (outer dimensions) Mirror with Plastic
moulded frame
Rectangular shape 1500x450 mm Mirror with Plastic moulded frame
Hard board 6 mm thick
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia
with length not less than 700 mm i/c PVC waste fittings
Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia
with length not less than 700 mm i/c PVC waste fittings
Flexible (coil shaped) PVC waste pipe for sink and washbasin
32 mm dia with length not less than 700 mm i/c PVC waste fittings
Flexible (coil shaped) PVC waste pipe for sink and wash basin
40 mm dia with length not less than 700 mm i/c PVC waste fittings
Coloured High density polyethylene / poly propylene 10 lit. (full
flush) capacity controlled low level flushing cistern with fittings
White Vitreous china 10 litre (full flush) capacity controlled low level
flushing cistern with all fittings
Coloured Vitreous china 10 litre (full flush) capacity controlled
low level flushing cistern with all fittings
Flushing Cistern P.V.C. 10 litre capacity ( low level ) (White) ( with
fittings, accessories and flush pipe)
P.V.C. automatic flushing cistern 5 litre capacity
P.V.C. automatic flushing cistern 10 litre capacity
15 mm C.P. brass tap with elbow operation lever
White glazed fire clay draining board 600x450x25 mm

each
2500.00
each
15000.00
each
3400.00
each
14000.00
each
5185.00
each

4950.00

each

4250.00

each

3000.00

each

3150.00

each

2845.00

each
2120.00
each
1320.00
each
1150.00
each
1720.00
each
550.00
each
450.00
each
300.00
each
each
sqm

350.00
700.00
175.00

each

30.00

each

35.00

each

28.00

each

30.00

each

685.00

each

975.00

each

1500.00

each
each
each
530.00
700.00

640.00
490.00
each

each

550.00

SUB HEAD : 17 - SANITARY INSTALLATIONS

279

Code
No.

7375
7376
7377
7378
7379
7491
7492
7493
7494
7503
7504
7505
7506
7507
7508
7805
7806
7807
7808
7809
7858
9999

Description

G.I. flush pipe and C.P. brass spreader including C.P.

connecting pipe Single lipped urinal
G.I. flush pipe and C.P. brass spreader including C.P.
connecting pipe Range of two lipped urinals
G.I. flush pipe and C.P. brass spreader including C.P.
connecting pipe Range of three lipped urinals
G.I. flush pipe and C.P. brass spreader including
C.P.connecting pipe Range of four lipped urinals
White vitreous china clay half stall urinal flat back 580x380x350 mm
or angle back 450x375x350 mm with waste fittings as per IS: 2556
PTMT - Waste Coupling 31/32 mm
PTMT - Waste Coupling 38/40 mm
PTMT - Bottle Trap 31/32 mm
PTMT - Bottle Trap 38/40 mm
PTMT Liquid Soap Container of 400 ml capacity
PTMT Towel Ring 215x200x37 mm
PTMT- Towel Rail (450 mm)
PTMT - Towel Rail (600 mm)
PTMT Shelf 450x124x36 mm
PTMT - Urinal Spreader 15 mm
Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan
724 mm X 578 mm
Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X
355 mm
Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X
345 mm
Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet
Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet
P.T.M.T. Urinal cock 15 mm dia
Sundries

Unit

Rate `

each

465.00

each

1050.00

each

1250.00

each

1900.00

each
each
each
each
each
each
each
each
each
each
each

1600.00
62.00
88.00
390.00
410.00
185.00
152.00
242.00
292.00
314.00
150.00

each

3800.00

each

1850.00

each
each
each
each
L.S.

1850.00
435.00
468.00
120.00
1.78

280

SUB HEAD : 17 - SANITARY INSTALLATIONS

17.0 SANITARY INSTALLATIONS

Code No.

Description

17.1

Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors
wherever required:
17.1.1
White Vitreous china Orissa pattern W.C. pan of size 580x440
mm with integral type foot rests
17.1.2
Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size
585x480 mm with flush pipe and integrated type foot rests

17.2

17.3

17.4

17.5

Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever required :
17.2.1
W.C. pan with ISI marked white solid plastic seat and lid
17.2.2
W.C. pan with ISI marked black solid plastic seat and lid
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm
flush bend, overflow arrangement with specials of standard make and
mosquito proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and making good
the walls and floors wherever required :
17.3.1
W.C. pan with ISI marked white solid plastic seat and lid
17.3.2
W.C. pan with ISI marked black solid plastic seat and lid
Providing and fixing white vitreous china flat back or wall corner
type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I
clamps complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :
17.4.1
One urinal basin with 5 litre white P.V.C. automatic flushing
cistern
17.4.2
Range of two urinal basins with 5 litre white P.V.C. automatic
flushing cistern
17.4.3
Range of three urinal basins with 10litre white P.V.C. automatic
flushing cistern
17.4.4
Range of four urinal basins with 10 litre white P.V.C. automatic
flushing cistern
Providing and fixing white vitreous china flat back half stall urinal of
size 580x380x350 mm with white PVC automatic flushing cistern, with
fittings, standard size C.P. brass flush pipe, spreaders with unions and
clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap
with outlet grating and other couplings in C.P. brass, including painting
of fittings and cutting and making good the walls and floors wherever
required :

Unit

Rate `

3392.80
each
6900.55
each

each
each

3317.30
3294.05

each
each

4784.60
4761.35

3326.10
each
5399.40
each
7210.50
each
10045.40
each

17.5.1

Single half stall urinal with 5 litre P.V.C. automatic flushing

cistern

SUB HEAD : 17 - SANITARY INSTALLATIONS

each

6591.10

281

Code No.

Description

Unit

Rate `

17.5.2

each

10332.25

each

13411.10

each

16360.25

each

4869.95

each

7399.70

each

9952.55

each

12225.05

17.5.3
17.5.4

17.6

17.7

Range of two half stall urinals with 5 litre P.V.C.

automatic flushing cistern
Range of three half stall urinals with 10 litre
P.V.C.automatic flushing cistern
Range of four half stall urinals with 10 litre P.V.C. automatic
flushing cistern

Providing and fixing one piece construction white vitreous china

squatting plate with an integral longitudinal flushing pipe, white P.V.C.
automatic flushing cistern, with fittings, standard size G.I. / PVC flush
pipe for back and front flush with standard spreader pipes with fittings,
G.I clamps and C.P. brass coupling complete, including painting of
fittings and cutting and making good the walls and floors etc. wherever
required :
17.6.1
Single squatting plate with 5 litre P.V.C. automatic
flushing cistern
17.6.2
Range of two squatting plates with 5 litre P.V.C. automatic
flushing cistern
17.6.3
Range of three squatting plates with 10 litre P.V.C.
automatic flushing cistern
17.6.4
Range of four squatting plates with 10 litre P.V.C. automatic
flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P.
brass pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.1
White Vitreous China Wash basin size 630x450 mm with a
pair of 15 mm C.P. brass pillar taps
17.7.2
White Vitreous China Wash basin size 630x450 mm with a
single 15 mm C.P. brass pillar tap
17.7.3
White Vitreous China Wash basin size 550x400 mm with a
pair of 15 mm C.P. brass pillar taps
17.7.4
White Vitreous China Flat back wash basin size 550x 400 mm
with single 15 mm C.P. brass pillar tap
17.7.5
17.7.6
17.7.7
17.7.8

17.7.9

17.7.10
17.7.11

each
each
each
each

White Vitreous China Angle back wash basin size 600 x 480
mm with single 15 mm C.P. brass pillar tap

each

White Vitreous China Angle back wash basin size 400 x 400
mm with single 15 mm C.P. brass pillar tap

each

White Vitreous China Flat back wash basin size 450x 300 mm
with single 15 mm C.P. brass pillar tap

each

White Vitreous China Surgeon type wash basin of size

660x460 mm with a pair of 15 mm C.P. brass pillar taps
with elbow
including operated levers

each

White Vitreous China Surgeon type wash basin of size

660x460 mm with single 15 mm C.P. brass pillar taps with
elbow operated
levers ISI marked

each

Stainless Steel AISI-304(18/8) Round basin 405x355 mm with

single 15 mm C.P. brass pillar tap

each

Stainless Steel
AISI-304(18/8)
Wash basin
530x345 mm
with
single 15 mm
C.P. brass
pillar tap
each

2331.15

2010.35

2010.35

1661.90

3812.05

2968.60
2127.90
1807.10

1661.90
3317.05
3317.05

282

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code
No.

17.8
17.9

Description

Unit

Rate `

each

979.95

each

2442.60

17.10.1.1 510x1040 mm bowl depth 250 mm

each

7052.15

17.10.1.2 510x1040 mm bowl depth 225 mm

each

6779.20

17.10.1.3 510x1040 mm bowl depth 200 mm

each

5966.15

17.10.1.4 510x1040 mm bowl depth 178 mm

each

4514.25

17.10.2.1 610x510 mm bowl depth 200 mm

each

4343.45

17.10.2.2 610x460 mm bowl depth 200 mm

each

3989.20

17.10.2.3 470x420 mm bowl depth 178 mm

each

3147.10

Providing and fixing white vitreous china laboratory sink with C.I.
brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste
and 40mm C.P. brass trap with necessary C.P. brass unions
complete, including painting of fittings and brackets, cutting and making
good the wall wherever required :
17.11.1 Size 450x300x150 mm
17.11.2 Size 600x450x200 mm

each
each

2343.90
3162.75

each

1017.95

Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings.
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain
with rubber plug, 40 mm C.P. brass waste complete, including
painting the fittings and brackets, cutting and making good the walls
wherever required:
17.9.1

17.10

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets, cutting and making good
the walls wherever required :
17.10.1

17.10.2

17.11

17.12

17.14

Kitchen sink without drain board

White glazed fire clay draining board of size 600x450x 25 mm

Providing and fixing white vitreous china water closet squatting pan
(Indian type) :
17.13.1

Long pattern W.C. pan of size 580 mm

each

1022.00

17.13.2

Orissa pattern W.C. pan of size 580x440 mm

each

1405.30

each

627.20

Extra for using coloured W.C. pan instead of white W.C. pan :
17.14.1

17.15

Kitchen sink with drain board

Providing and fixing draining board with C.I. brackets including

painting of brackets, cutting and making good the walls wherever
required :
17.12.1

17.13

White glazed fire clay kitchen sink of size 600x450x 250 mm

Orissa pattern W.C. pan 580x440 mm

Providing and fixing white vitreous china pedestal type (European type/
wash down type) water closet pan.

17.16
Extra for using coloured pedestal type W.C pan (European type) with
low level cistern of same colour instead of white vitreous china W.C pan and
cistern.
17.17

1312.40
each
1446.05
each

Providing and fixing a pair of white vitreous china foot rests of standard
pattern for squatting pan water closet :
17.17.1

250x130x30 mm

pair

163.15

SUB HEAD : 17 - SANITARY INSTALLATIONS

283

Code No.

17.18

17.19

17.20

Description

Unit

Rate `

17.17.2

pair

163.15

250x125x25 mm

Providing and fixing P.V.C. low level flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings
and fixtures complete.
17.18.1

10 litre capacity - White

each

865.05

17.18.2

10 litre capacity - coloured

each

921.05

Providing and fixing controlled flush, low level cistern made of vitreous
china with all fittings complete.
17.19.1

10 litre (full flush) capacity-white

each

1604.10

17.19.2

10 litre (full flush) capacity-coloured

each

2213.90

Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete :
17.20.1

White solid plastic seat with lid

each

411.00

17.20.2

Black solid plastic seat with lid

each

387.75

each

666.50

each

103.20

each

891.10

each

2424.10

17.20.3 Coloured (other than black & white) solid plastic seat with lid
17.21

Deleted.

17.22

Providing and fixing G.I. inlet connection for flush pipe connecting with
W.C. pan.

17.23
Providing and fixing white vitreous china flat back or wall corner
type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes
respectively.
17.24

Providing and fixing white vitreous china squatting plate urinal with integral
rim longitudinal flush pipe.

17.25

17.26

Providing and fixing white vitreous china wash basin including making
all connections but excluding the cost of fittings :
17.25.1

Flat back wash basin of size 630x450 mm

each

973.00

17.25.2

Flat back wash basin of size 550x400 mm

each

769.70

17.25.3

Angle back wash basin of size 600x480 mm

each

973.00

17.25.4

Angle back wash basin of size 400x400 mm

each

624.55

17.25.5

Flat back wash basin of size 450x300 mm

each

624.55

17.25.6

Surgeon type wash basin of size 660x460 mm

each

1408.55

each

1673.95

Providing and fixing kitchen sink including making all connections

excluding cost of fittings.
17.26.1

17.27

17.28

284

White glazed fire clay sink of size 600x450x250 mm

Providing and fixing white vitreous china laboratory sink including

making all connections excluding cost of fittings :
17.27.1

Size 450x300x150 mm

each

1058.35

17.27.2

Size 600x450x200 mm

each

1877.20

each

76.75

Providing and fixing P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code No.

Description

Unit

Rate `

17.28.1.2 40 mm dia
17.28.2 Flexible pipe
17.28.2.1 32 mm dia
74.45 17.28.2.2 40 mm dia

each

82.60

17.29

Providing and fixing 100 mm sand cast Iron grating for gully trap.

each

each
each
76.75
29.50

17.30

Providing and fixing in position 25 mm diameter mosquito proof coupling

of approved municipal design.

each

38.60

Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board ground
fixed
to wooden cleats with C.P. brass screws and washers complete.

each

793.95

each
each
each
each

884.10
727.90
783.95
1332.45

each

543.80

17.31

17.32

17.33

17.34

17.35

Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved
make and shade with 6 mm thick hard board backing :
17.32.1 Circular shape 450 mm dia
17.32.2 Rectangular shape 453x357 mm
17.32.3 Oval shape 450x350 mm (outer dimensions)
17.32.4 Rectangular shape 1500x450 mm
Providing and fixing 600x120x5 mm glass shelf with edges round
off, supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc.,
complete.
Providing and fixing toilet paper holder :
17.34.1

C.P. brass

each

415.90

17.34.2

Vitreous china

each

334.55

17.35.1.1 Sand cast iron S&S pipe as per IS: 1729

metre

859.00

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe
as per IS: 3989

metre

917.75

17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

metre

709.10

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989
Providing and filling the joints with spun yarn, cement slurry and cement
mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

metre

791.30

17.36.1

75 mm dia pipe

each

65.70

17.36.2

100 mm dia pipe

each

77.40

Providing and fixing soil, waste and vent pipes :

17.35.1

100 mm dia

17.35.2 75mm diameter :

17.36

17.37

Providing and fixing M.S. holder-bat clamps of approved design to Sand

Cast iron/cast iron (spun) pipe embedded in and including cement
concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size), including cost of cutting
holes and making good the walls etc. :
17.37.1
17.37.2

For 100 mm dia

pipe

For 75 mm dia pipe

each

152.90

SUB HEAD : 17 - SANITARY INSTALLATIONS

each

150.60

285

Code
No.

17.38

Description

Unit

Rate `

each

341.55

each

385.70

17.38.2.1 Sand cast iron S&S as per IS - 1729

each

272.05

17.38.2.2 Sand cast iron S&S as per IS- 3989

each

318.50

each

434.50

each

335.75

17.39.2.1 Sand cast iron S&S as per IS -1729

each

219.75

17.39.2.2 Sand cast iron S&S as per IS - 3989

each

248.80

each

318.35

each

371.75

Providing and fixing bend of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts complete.
17.38.1

100 mm dia

17.38.1.1 Sand cast iron S&S as per IS 1729

17.38.1.2 Sand cast iron S&S as per IS 3989
17.38.2

17.39
degree.

75 mm dia

Providing and fixing plain bend of required

17.39.1

100 mm dia

17.39.1.1 Sand cast iron S&S as per IS 1729

17.39.1.2 Sand cast iron S&S as per IS : 3989
17.39.2

17.40

75 mm dia

Providing and fixing heel rest sanitary bend

17.40.1

100 mm dia

17.40.1.1 Sand cast iron S&S as per IS 1729

17.40.1.2 Sand cast iron S&S as per IS 3989
17.40.2

75 mm dia
17.40.2.1 Sand cast iron S&S as per IS - 1729

each

277.85 17.40.2.2 Sand cast iron S&S as per IS - 3989

each
312.70

17.41

Providing and fixing double equal junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts
complete :
17.41.1

100x100x100x100 mm

17.41.1.1 Sand cast iron S&S as per IS - 1729

each

687.40

17.41.1.2 Sand cast iron S&S as per IS - 3989

each

762.90

17.41.2

75x75x75x75 mm

17.41.2.1 Sand cast iron S&S as per IS - 1729

17.41.2.2 Sand cast iron S&S as per IS - 3989
17.42
degree.

Providing and fixing double equal plain junction of required

17.42.1 100x100x100x100 mm
17.42.1.1 Sand cast iron S&S as per IS - 1729
17.42.1.2 Sand cast iron S&S as per IS - 3989

17.42.2
75x75x75x7
5 mm
17.42.2.1
Sand cast
iron S&S as
per IS 1729

17.42.2.2 Sand cast iron S&S as per IS - 3989

286

each

533.35

each

597.25

each

631.95

each

748.10

each

424.20

each

558.90

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code
No.

17.43

Description

Unit

Rate `

each

485.60

each

623.80

17.43.2.1 Sand cast iron S&S as per IS - 1729

each

362.65

17.43.2.2 Sand cast iron S&S as per IS - 3989

each

472.95

each

550.65

each

576.20

17.44.2.1 Sand cast iron S&S as per IS - 1729

each

330.10

17.44.2.2 Sand cast iron S&S as per IS - 3989

each

405.60

17.45.1.1 Sand cast iron S&S as per IS - 1729

each

687.70

17.45.1.2 Sand cast iron S&S as per IS - 3989

each

1036.15

17.46.1.1 Sand cast iron S&S as per IS - 1729

each

666.80

17.46.1.2 Sand cast iron S&S as per IS - 3989

each

957.15

17.47.1.1 Sand cast iron S&S as per IS - 1729

each

513.45

17.47.1.2 Sand cast iron S&S as per IS - 3989

each

792.20

each

457.70

Providing and fixing single equal plain junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete.
17.43.1

100x100x100 mm

17.43.1.1 Sand cast iron S&S as per IS 1729

17.43.1.2 Sand cast iron S&S as per IS 3989
17.43.2

17.44
degree :

75x75x75 mm

Providing and fixing single equal plain junction of required

17.44.1

100x100x100 mm

17.44.1.1 Sand cast iron S&S as per IS 1729

17.44.1.2 Sand cast iron S&S as per IS 3989
17.44.2

17.45

Providing and fixing double unequal junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts
complete:
17.45.1

17.46
degree :

100x100x75x75 mm

Providing and fixing single unequal junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts
complete :
17.47.1

17.48

100x100x75x75 mm

Providing and fixing double unequal plain junction of required

17.46.1

17.47

75x75x75 mm

100x100x75 mm

Providing and fixing single unequal plain junction of required degree :

17.48.1

100x100x75 mm

17.48.1.1 Sand cast iron S&S as per IS - 1729

17.48.1.2 Sand cast iron S&S as per IS - 3989

17.49

each

690.00

17.49.1.1 Sand cast iron S&S as per IS - 1729

each

666.80

17.49.1.2 Sand cast iron S&S as per IS 3989

each

643.55

Providing and fixing double equal plain invert branch of required degree:
17.49.1

100x100x100x100 mm

SUB HEAD : 17 - SANITARY INSTALLATIONS

287

Code No.

Description

17.49.2

Unit

Rate `

75x75x75x75 mm
17.49.2.1 Sand cast iron S&S as per IS - 1729

each

498.50 17.49.2.2 Sand cast iron S&S as per IS - 3989

each
515.95

17.50

Providing and fixing single equal plain invert branch of required

degree : 17.50.1

100x100x100 mm

17.50.1.1 Sand cast iron S&S as per iron

1729

each

504.15

each

521.60

17.50.2.1 Sand cast iron S&S as per IS - 1729

each

394.00

17.50.2.2 Sand cast iron S&S as per IS - 3989

each

397.45

17.50.1.2 Sand cast iron S&S as per IS - 3989

17.50.2

17.51
degree :

75x75x75 mm

Providing and fixing double unequal invert branch of required

17.51.1

100x100x75x75 mm
17.51.1.1 Sand cast iron S&S as per IS - 1729

each

690.00 17.51.1.2 Sand cast iron S&S as per IS - 3989

each
870.05

17.52

Providing and fixing single unequal plain invert branch of required

degree : 17.52.1

17.53
1729

17.52.1.1 Sand cast iron S&S as per IS - 1729

each

602.90

17.52.1.2 Sand cast iron S&S as per IS - 3989

each

660.95

17.53.1.1 With 75 mm dia pipe

each

275.50

17.53.1.2 With 100 mm dia

pipe

each

443.95

17.53.2.1 With 75 mm dia pipe

each

376.40

17.53.2.2 With 100 mm dia

pipe

each

472.80

17.53.3.1 With 75 mm dia pipe

each

452.90

17.53.3.2 With 100 mm dia pipe

each

577.20

each

283.65

each

364.35

Providing and fixing sand cast iron S&S off sets as per IS:
17.53.1

17.53.2

17.53.3

17.54

100x100x75 mm

76 mm off sets

114 mm off sets

152 mm off sets

Providing and fixing sand cast iron S&S off sets as per IS: 3989 :
17.54.1 75 mm off sets
17.54.1.1 With 75 mm dia pipe
17.54.2 150 mm off sets
17.54.2.1 With 75 mm dia pipe

17.54.2.2 With 100 mm dia pipe

17.55

288

each

486.30

Providing and fixing door piece, insertion rubber washer 3mm thick,
bolts & nuts complete :

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code No.

Description

Unit

Rate `

each

513.45

each

513.45

each

359.15

each

382.40

each

248.65

each

434.50

each

197.70

each

370.75

each

194.05

each

318.35

17.57.2.1 Sand cast iron S&S as per IS - 1729

each

153.55

17.57.2.2 Sand cast iron S&S as per IS - 3989

each

219.75

each
each
each

243.75
205.30
163.40

each
each
each

68.60
57.15
52.15

17.55.1

100 mm

17.55.1.1 Sand cast iron S&S as per IS 1729

17.55.1.2 Sand cast iron S&S as per IS 3989
17.55.2

75 mm

17.55.2.1 Sand cast iron S&S as per IS 1729

17.55.2.2 Sand cast iron S&S as per IS 3989
17.56

Providing and fixing terminal guard :

17.56.1

100 mm

17.56.1.1 Sand cast iron S&S as per IS 1729

17.56.1.2 Sand cast iron S&S as per IS 3989
17.56.2

75 mm

17.56.2.1 Sand cast iron S&S as per IS 1729

17.56.2.2 Sand cast iron S&S as per IS 3989
17.57

Providing and fixing collar :

17.57.1

100 mm

17.57.1.1 Sand cast iron S&S as per IS 1729

17.57.1.2 Sand cast iron S&S as per IS 3989
17.57.2

17.58

17.59

17.60

75 mm

Providing lead caulked joints to sand cast iron/centrifugally cast (spun)

iron pipes and fittings of diameter :
17.58.1 100 mm
17.58.2 75 mm
17.58.3 50 mm
Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter :
17.59.1 100 mm
17.59.2 75 mm
17.59.3 50 mm
Providing and fixing trap of self cleansing design with screwed down
or hinged grating with or without vent arm complete, including cost of
cutting and making good the walls and floors :
17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1
17.60.1.2
1729
17.60.2
17.60.2.1
3989
17.60.2.2
1729

Sand cast iron S&S as per IS: 3989

Sand Cast Iron S&S as per IS:
100 mm inlet and 75 mm outlet
Sand cast iron S&S as per IS -

each
each

982.55
796.70

each
each

1020.90
730.50

Sand Cast Iron S&S as per IS-

SUB HEAD : 17 - SANITARY INSTALLATIONS

289

Code
No.

17.61

Description

Cutting chases in brick masonry walls for following diameter sand cast
iron/ centrifugally cast (spun) iron pipes and making good the same with
cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone
aggregate 12.5 mm nominal size), including necessary plaster and
pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
17.61.1
100 mm dia
17.61.2
75 mm dia
17.61.3 50 mm dia

Painting C.I. cistern with bitumastic or any other anti-corrosive paint

inside and white paint over a coat of zinc chromate yellow primer (of
approved quality ) on the outside surface of the cistern, flush pipe,
other fittings,
etc. complete for new work.
17.63
Re-painting C.I. cistern with bitumastic or any other anti-corrosive
paint inside and white paint on the outside surface of the cistern, flush
pipe, other fittings, etc. complete, including polishing of wooden seat
and lid
and cleaning of W.C. pan with acid wherever necessary.
17.64
Repainting C.I. cistern with synthetic enamel paint of approved
colour, brand and manufacture on the outside surface of cistern, flush pipe, other
fittings etc. complete.
17.65
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent
pipes and fittings with two coats of synthetic enamel paint of any colour
such as chocolate grey, or buff etc. over a coat of primer (of approved
quality) for ew work :
17.65.1 100 mm diameter
17.65.2 pipe

Unit

Rate `

metre
332.00 metre
237.60
metre
151.80

17.62

each

445.20

each

313.65

each

132.25

metre

38.65

metre

29.50

75 mm diameter pipe
17.66

17.67
17.68

17.69

Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste,
vent pipes and fittings with one coat of synthetic enamel paint of any
colour such as chocolate, grey or buff etc :
17.66.1 100 mm diameter pipe
metre
17.66.2 75 mm diameter pipe
metre
Repainting bath tub of size 1700x730x430 mm with enamel paint.
each
Providing and fixing vitreous china dual purpose closet suitable for
use as squatting pan or European type water closet (Anglo Indian W.C
pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10
litre low level flushing cistern with fitting and brackets, 40 mm flush
bend, 20 mm over flow pipe, with specials of standard make and
mosquito proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and making good the
walls and floors wherever required:
17.68.1
White vitreous china dual purpose WC pan with white solid
plastic seat and lid with white vitreous china flushing cistern
and C.P. flush bend.
each
Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm breadth
weighing not less than 45 gms
each
17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth,

19.30
14.45
444.90

6510.60

113.95

weighing not less

290

than 60 gms

each

144.15

SUB HEAD : 17 - SANITARY INSTALLATIONS

Code
No.

17.70

Description

Unit

Rate `

each

494.90

each

518.15

each

228.85

each

218.50

each

483.45

each

541.50

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm
height of approved quality and colour, weighing not less than 300 gms.

each

567.05

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm

with 1/2" BSP thread and shapes, weighing not less than 60 gms.

each

188.20

each

156.05

Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1

17.71

17.72

17.73

17.74
17.75
17.76

Bottle trap 31mm single piece moulded with height of 270

mm, effective length of tail pipe 260 mm from the centre of
the waste coupling, 77 mm breadth with 25 mm minimum
water seal,
17.70.2 weighing not less than 260 gms
Bottle trap 38 mm single piece moulded with height of 270
mm, effective length of tail pipe 260 mm from the centre of
the waste coupling, 77 mm breadth with 25 mm minimum
water
seal, weighing not less than 263 gms
Providing and fixing PTMT liquid soap container 109 mm wide, 125
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour,
weighing not less than 105 gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm
long, 200 mm wide with minimum distances of 37 mm from wall
face with concealed fittings arrangement of approved quality and
colour, weighing
not less than 88 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm
wide and effective height of 88 mm, weighing not less than
170 gms
17.73.2 600 mm long towel rail with total length of 645 mm, width 78
mm and effective height of 88 mm, weighing not less than
190
gms

Providing and fixing PTMT urinal cock of approved quality and colour.
17.76.1

15 mm nominal bore, 80 mm long, 42 mm high and 30mm

wide with BSP female threads weighing not less than 48 gms

17.77

Providing and fixing M.S. holder bat clamp of approved design to

sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets
made of 50x5 mm flat of specified shape, projecting 75 mm outside the
wall surface and fixed on wall with 4nos, 6mm dia expansion hold
fasteners, including drilling necessary holes in brick wall/ CC/ RCC
surface and the cost of bolts etc. The pipes shall be fixed to the
already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S.
flats of specified shape and of total length 420 mm and shall be fixed
with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each
side of the pipe.
17.77.1
17.77.3
17.77.2

Total bracket
length 580 mm of
approved shape
and design
(for single 100 mm
dia pipe)

each

197.80

Total bracket length 810 mm of approved shape and design

(for two 100 mm dia pipes)

each

240.30

Total bracket length 1040 mm of approved shape and design

(for three 100 mm dia pipes)

each

282.75

SUB HEAD : 17 - SANITARY INSTALLATIONS

291

Code
No.

17.78

17.79

17.80

Description

Unit

Providing and fixing white vitreous china extended wall mounting water
closet of size 780x370x690 mm of approved shape including providing
& fixing white vitreous china cistern with dual flush fitting, of flushing
capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover,
and cistern
fittings, nuts, bolts and gasket etc complete.

each

10100.90

Providing & fixing white vitreous china water less urinal of size 600 x
330 x 315 mm having antibacterial /germs free ceramic surface, fixed
with
cartridge having debris catcher and hygiene seal.
Providing and fixing white vitreous china battery based infrared sensor
operated urinal of approx. size 610 x 390 x 370 mm having pre & post
flushing with water (250 ml & 500 ml consumption), having water inlet
from back side, including fixing to wall with suitable brackets all as per
manufacturers specification and direction of Engineer-in-charge.

Rate `

21835.55
each

16724.95
each

292

SUB HEAD : 17 - SANITARY INSTALLATIONS

SUB-HEAD : 18.0

WATER SUPPLY

293

294

1468

r
BAS
IC o
RAp
ES e
(S
18
W B
ER e
l
SUP
PL d

Code
No.

0010
011
4
011
5
011

Descript
ion

Coolie

0123

0124

Fitter (grade
1)

0761

6
011

0771
1301

1304

1305

1307

1339

1340

1342

1343
1360

1361

1362
1373

1374

1375

1376

1377

1378

1379

1380
1381

1382

1383

1384

1397

1464

1466

A
s
s
i
s
t
a
n
t
F
i
t
t
e
r
o
r
2
n
d
c
l
a
s

s Mason (brick layer) 2nd class

Fuel wood

Unit

Rate `

Kerosene oil

day

800.00

Bleaching powder

day

329.00

Surface box for stop cock

day

329.00

Surface box for sluice valve

day

435.00

Surface box for water meter

day

399.00

Brass bib-cock 15 mm dia

day

435.00

Brass bib-cock 20 mm dia

day

399.00

Brass stop-cock 15 mm dia

quintal

525.00

Brass stop-cock 20 mm dia

litre

48.00

C.I.mouth, brass ferrule 15 mm

quintal

1750.00

dia C.I.mouth, brass ferrule 20

each

125.00

mm dia C.l.mouth, brass ferrule

each

210.00

25 mm dia

each

250.00

Rubber insertions for 80 mm dia pipe joints

each

210.00

Rubber insertions for 100 mm dia pipe

each

225.00

joints Rubber insertions for 125 mm dia

each

210.00

pipe joints Rubber insertions for 150 mm

each

280.00

dia pipe joints Rubber insertions for 200

each

140.00

mm dia pipe joints Rubber insertions for

each

160.00

250 mm dia pipe joints Rubber insertions

each

220.00

for 300 mm dia pipe joints Rubber

each

15.00

insertions for 350 mm dia pipe joints

each

18.00

Rubber insertions for 400 mm dia pipe

each

20.00

joints Rubber insertions for 450 mm dia

each

20.00

pipe joints Rubber insertions for 500 mm

each

25.00

dia pipe joints Rubber insertions for 600

each

40.00

mm dia pipe joints Pig lead

each

45.00

S & S.C.I. standard specials upto 300 mm dia (heavy

each

50.00

class) S & S.C.I. standard specials over 300 mm dia

each

73.00

(heavy class)

each

92.00

each

110.00

each

125.00

kilogram

90.00

quintal

3600.00

quintal

3700.00

quintal

5500.00

1
s
t

Flanged C.I. standard specials upto 300 mm dia (heavy class)

SUB HEAD : 18 - WATER SUPPLY

295

Code
No.

1470
1472
1545
1546
1547
1548
1549
1550
1551
1552
1555
1559
1608
1612
1641
1642
1643
1644
1645
1646
1647
1648
1649
1687

Description

Flanged C.I. standard specials over 300 mm dia (heavy

ats

class) Casing pipe 100 mm dia

G.I. pipes 15 mm

flo

20

dia G.I. pipes 20

mm dia G.I. pipes

25

dia

H.

mm

dia

G.I.

pipes 32 mm dia
G.I. pipes 40 mm

P.

dia G.I. pipes 50

or

mm dia G.I. pipes

L.P

65

mm

dia

G.I.

pipes 80 mm dia

bal

G.I. back (jam) nuts 25 mm

dia G.I. back (jam) nuts 65

val

mm dia G.I. tees (equal) 25

ve

mm

wit

G.I. tees (equal) 65 mm

G.I. Union 15 mm nominal
bore

G.I.

Union

20

mm

nominal bore G.I. Union 25

mm nominal bore G.I. Union
32 mm nominal bore G.I.
Union 40 mm nominal bore
G.I. Union 50 mm nominal
bore

G.I.

Union

65

mm

nominal bore G.I. Union 80

1688

mm nominal bore

1689

Polyethylene water storage tank with cover and suitable

locking arrangement per

1690

pol

yth

en
e

flo

ats

25

m
m

dia

Unplasticised P.V.C. connection pipe with brass union 30 cm

long 15 mm bore

Unplasticised P.V.C. connection pipe with brass union 30 cm

long 20 mm bore

Brass full way

valve with C.I.
wheel
(screwed end)
25 mm dia

Unplasticised P.V.C. connection pipe with brass union 45 cm

long 15 mm bore

1881

Unplasticised P.V.C. connection pipe with brass union 45 cm

long 20 mm bore

1882

S.C.I. hand pump

1922

Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia

1923

Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia

1924

Spun yarn

1927

Strainer brass 40 mm dia 1.5 metre long

H.P. or L.P. ball valve with polythene floats: 15 mm

1693
1878
1879

each kilogram each each each each

Unit

Rate `

0.00

275.00

metre

365.00

metre

460.00

metre

0.

10.00

metre

22.00

metre

45.00

metre

280.00

metre

55.00

metre

5.

75.00

metre

85.00

each

120.00

each

185.00

each

220.00

each

5.

430.00

each

510.00

each

each

each

each

5.

each

each

each

quintal

each

5.30
30.00
35.00
35.00

6
litre

0.

48.00

670.00

50.00

60.00

50.00

0.

600.00

210.00

each

305.00

each

330.00

each

350.00

each
each
each

296

SUB HEAD : 18 - WATER SUPPLY

Code
No.

1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1940
1941
1942
1943
1944
1945
1956
1957
1958
1959
1960
1961
1962
1963
1964
2271
2272
2309
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328

Description

Brass full way valve with C.I. wheel (screwed end) 32 mm dia
Brass full way valve with C.I. wheel (screwed end) 40 mm dia
Brass full way valve with C.I. wheel (screwed end) 50 mm dia

Carriage
of Spun
iron S & S
pipes 500
mm dia

Unit

each each
each each
each each

Brass full way valve with C.I. wheel (screwed end) 65 mm dia

each each

Brass full way valve with C.I. wheel (screwed end) 80 mm dia

each each

Gunmetal non-return valve-horizontal (screwed end) 25 mm

each each

dia Gunmetal non-return valve-horizontal (screwed end) 32

each each

mm dia Gunmetal non-return valve-horizontal (screwed end)

each each

40 mm dia Gunmetal non-return valve-horizontal (screwed

each each

end) 50 mm dia Gunmetal non-return valve-horizontal

each each

(screwed end) 65 mm dia Gunmetal non-return valve-

each each

horizontal (screwed end) 80 mm dia C.I. sluice valve (with

each each

caps) class I: 100 mm dia

each each

C.I. sluice valve (with caps) class I : 125 mm dia

tonne tonne

C.I. sluice valve (with caps) class I: 150 mm dia

tonne

C.I. sluice valve (with caps) class I : 200 mm dia

100 metre 100

C.I. sluice valve (with caps) class I : 250 mm dia

metre

100

C.I. sluice valve (with caps) class I: 300 mm dia

metre

100

Bolts and nuts 16 mm dia 60 mm long

metre

100

Bolts and nuts 16 mm dia 65 mm long

metre

100

Bolts and nuts 20 mm dia 65 mm long

metre

100

Bolts and nuts 20 mm dia 70 mm long

metre

100

Bolts and nuts 20 mm dia 75 mm long

metre

100

Bolts and nuts 20 mm dia 80 mm long

metre

Bolts and nuts 24 mm dia 85 mm long

100 metre

Bolts and nuts 24 mm dia 90 mm long

Bolts and nuts 27 mm dia 100 mm long
Carriage of G.I. pipes below 100 mm
dia
Carriage of Stainless Steel pipes below 100 mm
dia Carriage of Cast Iron fittings
Carriage of Spun iron S & S pipes 100 mm dia
Carriage of Spun iron S & S pipes 125 mm dia
Carriage of Spun iron S & S pipes 150 mm dia
Carriage of Spun iron S & S pipes 200 mm dia
Carriage of Spun iron S & S pipes 250 mm dia
Carriage of Spun iron S & S pipes 300 mm.
dia Carriage of Spun iron S & S pipes 350 mm
dia Carriage of Spun iron S & S pipes 400 mm
dia Carriage of Spun iron S & S pipes 450 mm
dia

00 480.00 620.00 1080.00 1620.00 330.00 450.00

21

19

560.00 820.00 1490.00 2120.00 2410.00 2600.00

15.

2586.19

3600.00 7500.00 10980.00 15500.00 12.00 12.00 15.00

97

0.

15.00 16.00 18.00 28.00 32.00 38.00 94.65 94.65 94.65

25

232.76 310.91 387.93 631.03 896.73 1108.37 1551.71

86.

Rate `

SUB HEAD : 18 - WATER SUPPLY

297

Code
No.

2329
2330
2331
2332
2333
2334
2341
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2355
2356
2357
3080
3084
3088
3092
3096
3300
3311
3314
3317
3320
3321
3326
3327
7257
7258
7259
7260
7261

Description

Carriage of Spun iron S & S pipes 600mm

dia Carriage of C.I. pipes 500 mm dia
Carriage of R.C.C. pipes 900 mm dia

C.P.
Brass
angle
valve 15
mm

Unit

100 metre 100

metre 100
metre 100

Carriage of R.C.C. pipes 1000 mm dia

metre 100

Carriage of R. C. C. pipes 1100 mm

metre 100

dia Carriage of R.C.C. pipes 1200 mm

dia Carriage of pig lead

metre tonne
100 metre 100

Carriage of Ductile Iron pipes (k7) 100 mm

metre 100

dia Carriage of Cast iron pipes 150 mm dia

metre 100

Carriage of Cast iron ptpes 200 mm dia

metre 100

Carriage of Cast iron pipes 250 mm dia

metre 100

Carriage of Cast iron pipes 300 mm dia

metre 100

Carriage of Cast iron pipes 350 mm dia

metre 100

Carriage of Cast iron pipes 400 mm dia

metre 100

Carriage of Cast iron pipes 450 mm dia

metre 100

Carriage of Cast iron pipes 500 mm dia

metre 100

Carriage of Cast iron pipes 600 mm dia

metre 100

Carriage of Cast iron pipes 700 mm dia

metre 100

Carriage of Cast iron pipes 800 mm dia

metre 100

Carriage of Cast iron pipes 900 mm dia

metre each

Carriage of Cast iron pipes 1000 mm dia

each each

Gunmetal non-return valve - vertical (screwed end) 25 mm

each each

dia Gunmetal non-return valve - vertical (screwed end) 32

each each

mm dia Gunmetal non-return valve - vertical (screwed end)

each each

40 mm dia Gunmetal non-return valve - vertical (screwed

each each

end) 50 mm dia Gunmetal non-return valve - vertical

each each

(screwed end) 65 mm dia Gunmetal non-return valve -

each each

vertical (screwed end) 80 mm dia C.I.sluice valve (with

each each

caps) class II : 100 mm dia

each

C.I.sluice valve (with caps) class II : 125 mm

dia C.I.sluice valve (with caps) class II : 150
mm dia C.I.sluice valve (with caps) class II :
200 mm dia C.I.sluice valve (with caps) class II
: 250 mm dia C.I.sluice valve (with caps) class
II : 300 mm dia 15 mm Battery Based Sensor
Pillar Cock
C.P. Brass bibcock 15 mm
C.P. Brass long nose bibcock 15 mm
C.P. Brass long body bibcock 15 mm
C.P. Brass stop cock (concealed) 15
mm

29 2586.19 5818.93 7758.57 7758.57 7758.57 94.65

51

232.76 387.93 631.03 896.73 1108.37 1551.73

3.0

2115.97 2586.19 2586.19 3879.29 3879.29 3879.29

5818.93 7758.57 360.00 520.00 750.00 1010.00

9.

1710.00 2890.00 2910.00 3500.00 4300.00 9210.00

Rate `

417.00

14800.00 18500.00 5822.00 375.00 657.00 501.00

298

SUB HEAD : 18 - WATER SUPPLY

Code
No.

7400
7401
7402
7403
7405
7406
7407
7408
7409
7410
7411
7412
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7495
7496
7497
7498
7499
7500
7501
7509
7651
7652
7653
7654

Description

Unit

Rate `

15 mm PTMT bib cock

each

120.00

15 mm PTMT bib cock with flange (fancy)

each

133.00

15 mm PTMT bib-cock long body with

each

160.00

flange 15 mm dia PTMT stop cock(male

each

120.00

thread)

each

150.00

20 mm dia PTMT stop cock

each

180.00

PTMT pillar cock

each

PTMT push cock 15 mm dia

117.00

each

PTMT push cock 12 mm dia 20 mm BSP

90.00

each

PTMT grating 100 mm dia

35.00 each 240.00

PTMT Pillar cock (fancy) 15 mm foam flow

each

125 mm grating with waste hole

42.00

Rectangular type with openable circular lid 150 mm size 18 mm

high with 100 mm dia (110 gm)

each

122.00

Double acting air valve 50 mm

each

4000.00

Double acting air valve 80 mm

each

5200.00

Double acting air valve 100 mm

each

6800.00

Water meter (including testing charges) 80 mm

each

2130.00

Water meter (including testing charges) 100 mm

each

3300.00

Water meter (including testing charges) 150 mm

each

5000.00

Water meter (including testing charges) 200 mm

each

5400.00

Dirt box strainer 80 mm

each

2810.00

Dirt box strainer 100 mm

each

4580.00

Dirt box strainer 150 mm

each

5810.00

Dirt box strainer 200 mm

each

8250.00

PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium

Rod & H.D. Ball

each

162.00

PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium

Rod & H.D. Ball

each

198.00

PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium

Rod & H.D. Ball

each

420.00

PTMT Ball Cock 40mm complete with Epoxy Coated Aluminium

Rod & H.D. Ball

each

810.00

PTMT Ball Cock 50mm complete with Epoxy Coated

Aluminium Rod & H.D. Ball

each

1150.00

PTMT Angle Stop cock with Flange 15 mm

each

150.00

PTMT Swiveling shower 15 mm

each

110.00

PTMT Soap Dish/Holder 138x102x75 mm

each

130.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia

metre

950.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150 mm dia

metre

1200.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia

metre
1650.00

metre

3250.00

SUB HEAD : 18 - WATER SUPPLY

299

Code
No.

7655
7656
7657
7658
7659
7660
7662
7663
7664
7665
7666
7668
7669
7670
7671
7672
7673
7674
7675
7676
7677
7678
7679
7680
7681
7682
7683
7684
7685
7686
7687
7688
7689
7690
7691
7692
7693

Description

Unit

Rate `

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia

metre

2920.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia

metre

3550.00

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia

metre

4500.00

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia

metre

5200.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia

metre

6580.00

Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia

metre

7930.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia

metre

11900.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia

metre

12000.00

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 900 mm dia

metre

14500.00

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia

metre

16300.00

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia

each

30.00

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia

each

38.00

Rubber Gaskets Conforming to 1.S 5382 of S.B.R quality 200 mm

each

66.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm

each

78.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm

each

115.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm

each

132.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm

each

240.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm

each

280.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm

each

305.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm

each

380.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm

each

575.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm

each

690.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm

each

760.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm

each

1000.00

dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000

each

1200.00

Ductile Iron K - 12 specials suitable for push on jointing up to

600 mm dia
Ductile Iron K - 12 specials suitable for push on jointing over
600 mm dia

quintal

13000.00

quintal

18000.00

Ductile Iron specials suitable for mechanical jointing as per

I.S. 9523 - up to 600 mm dia

quintal

13700.00

Ductile Iron Specials suitable for mechanical jointing as per

I.S. 9523 over 600 mm dia

quintal

19650.00

metre

2180.00

Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia

metre

3500.00

Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia

metre

4110.00

Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia

metre

3425.00

Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia

metre

6960.00

Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia

metre

8800.00

Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia

metre

10610.00

Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia

metre

12900.00

mm dia

Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia

300

SUB HEAD : 18 - WATER SUPPLY

Code
No.

Description

Unit

Rate `

Ductile Iron Pipe Class K-9 flanges and welding 500 mm

metre

15100.00

dia Ductile Iron Pipe Class K-9 flanges and welding 600

metre

20630.00

mm dia Ductile Iron Pipe Class K-9 flanges and welding

metre

25600.00

700 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

900.00

100 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

1120.00

125 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

1350.00

150 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

2300.00

200 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

3000.00

250 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

4050.00

300 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

4850.00

350 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

6400.00

400 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

7750.00

450 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

9000.00

500 mm dia S&S Centrifugally (Spun) C.I. Pipe class LA

metre

12595.00

S&S Centrifugally (Spun) C.I. Pipe Specials as per IS

1538 suitable for lead jointing up to 300 mm dia

quintal

5450.00

S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538

suitable for lead jointing over 300 mm dia

quintal

8200.00

S&S Centrifugally (Spun) C.I. Pipe specials suitable for

mechanical joint as per I.S. 13382 up to 300 mm dia

quintal

9000.00

S&S Centrifugally (Spun) C.I. Pipe Specials suitable for

mechanical joint as per I.S. 13382 over 300 mm dia

quintal

9500.00

Screwed double flanged centrifugally cast (spun) C.I. Pipe

of Class B conforming to I.S. 1536, - 100 mm dia

metre

1375.00

Screwed double flanged centrifugally cast (spun) C.I. Pipe

of Class B conforming to I.S. 1536, - 150 mm dia

metre

2150.00

7714

Screwed double flanged centrifugally cast (spun) C.I. Pipe

of Class B conforming to I.S. 1536, - 200 mm dia

metre

3400.00

7715

Screwed double flanged centrifugally cast (spun) C.I. Pipe of

Class B conforming to I.S. 1536, - 250 mm dia

metre

4100.00

7716

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class

B conforming to I.S. 1536, - 300 mm dia

metre

5240.00

7717

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class

B conforming to I.S. 1536, - 350 mm dia

metre

6600.00

7718

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class

B conforming to I.S. 1536, - 400 mm dia

metre

8550.00

7719

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class

B conforming to I.S. 1536, - 450 mm dia

metre

10900.00

7720

Screwed double flanged centrifugally cast (spun) C./. Pipe of

Class B conforming to I.S. 1536, - 500 mm dia

metre

13560.00

7721

Screwed double flanged centrifugally cast (spun) C.I. Pipe of

Class B conforming to I.S. 1536, - 600 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia

metre
metre

18800.00
775.00

7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713

7722

600 mm dia

SUB HEAD : 18 - WATER SUPPLY

301

Code
No.

Description

Unit

Rate `

7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734
7735
7859
7861
7862

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900 mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm
dia P.T.M.T. Bib cock with nozzle 15 mm
P.T.M.T. Stop cock (concealed) 15 mm
15 mm nominal bore and 30 cm length PVC connection pipe
with P.T.M.T. Nuts
15 mm nominal bore and 45 cm length PVC connection pipe with
P.T.M.T. Nuts

each

32.00

7863

P.T.M.T. extension nipple 15

each

40.00

mm P.T.M.T. extension nipple

each

32.00

20

each

38.00

7864
7865
7866
8300
8301
8302
8303
8304
8305
8625
8626
8627
8628
8629
8630
8631
8633

mm

P.T.M.T.

extension

nipple 25 mm

metre
1120.00 metre
1550.00 metre
2100.00 metre
2900.00 metre
3445.00 metre
4015.00 metre
4852.00 metre
5735.00 metre
7480.00 metre
9613.00 metre
12100.00 metre
16070.00 metre
17032.00 each
145.00 each
158.00

each

57.00

1216 mm PE-AL-PE Composite pressure pipe

metre

1620 mm PE-AL-PE Composite pressure pipe

95.00 metre

2025 mm PE-AL-PE Composite pressure pipe

125.00 metre

2532 mm PE-AL-PE Composite pressure pipe

160.00 metre

3240 mm PE-AL-PE Composite pressure pipe

205.00 metre

4050 mm PE-AL-PE Composite pressure pipe

340.00 metre

Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4

-16 mm Outer dia
Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4
-20 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-25 mm outer dia
Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4
-32 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-40 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-50 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-63 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4
-90 mm Outer dia

375.00
metre

37.00

metre

57.00

metre

88.00

metre

142.00

metre

213.00

metre

333.00

metre

513.00

metre

302

1066.00
SUB HEAD : 18 - WATER SUPPLY

Code
No.

8634
8635
8636
8637
8638
8639
8640
8641
8642
8643
8644
8645
8701
8702

Description

Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11

-110 mm Outer dia
Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11160 mm Outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 mm inner dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia
Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia
SS pipe 304 grades with press fit technology as per JIS 3448
standard 48.60 mm outer dia
Coupling/Socket fittings for 15.88 mm outer dia SS pipe

Unit

Rate `

metre

1200.00

metre
metre
55.00
68.00
95.00
130.00
185.00
300.00
910.00

2500.00

metre
metre

metre
metre
metre
metre
metre
metre
metre
1300.00
1800.00
2150.00

metre
680.00 each
57.00

8779

SS pipe 304 grades with press fit technology as per JIS 3448
standard 15.88 mm outer dia

8780

SS pipe 304 grades with press fit technology as per JIS 3448
standard 22.22 mm outer dia

metre

144.00

8781

SS pipe 304 grades with press fit technology as per JIS 3448
standard 28.58 mm outer dia

metre

254.00

8782

SS pipe 304 grades with press fit technology as per JIS

3448 standard 34.00 mm outer dia

metre

330.00

8783

SS pipe 304 grades with press fit technology as per JIS 3448
standard 42.70 mm outer dia

metre

468.00

Coupling/Socket fittings for 28.58 mm outer dia SS pipe

metre

582.00

Coupling/Socket fittings for 34.00 mm outer dia SS pipe

each

88.00

Coupling/Socket fittings for 42.70 mm outer dia SS pipe

each

108.00

Coupling/Socket fittings for 48.60 mm outer dia SS pipe

each

231.00

Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe

each

330.00

Reducer for 28.58 mm X 15.88 mm outer Dia SS pipe

each

446.00

Reducer for 28.58 mm X 22.22 mm outer Dia SS pipe

each

103.00

Reducer for 34.00 mm X 15.88 mm outer Dia SS pipe

each

141.00

Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe

each

145.00

Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe

each

234.00

Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe

each

237.00

Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe

each

237.00

Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe

each

Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe

359.00

each

Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe

362.00

each

362.00

each

8786
8787
8788
8789
8790
8791
8792
8793
8794
8795
8796
8797
8798
8799
8800
8801

Coupling/Socket fittings for 22.22 mm outer dia SS pipe

87.00

SUB HEAD : 18 - WATER SUPPLY

each

468.00

303

Description

mm X 22.22 mm

Reducer for 48.60 mm X 22.22 mm outer Dia SS

outer dia SS pipe

pipe Reducer for 48.60 mm X 28.58 mm outer Dia

Reducing Tee for

SS pipe Reducer for 48.60 mm X 34.00 mm outer

8804

42.70

Dia SS pipe Reducer for48.60 mm X 42.70 mm outer

8805

Dia SS pipe Slip Coupling / Socket 15.88 mm outer

28.58 mm outer

8806

dia SS pipe Slip Coupling / Socket 22.22 mm outer

8807

dia SS pipe Slip Coupling / Socket 28.58 mm outer

8808

dia SS pipe Slip Coupling / Socket 34.00 mm outer

8809

dia SS pipe Slip Coupling / Socket 42.70 mm outer

8810

dia SS pipe Slip Coupling / Socket 48.60 mm outer

8811

dia SS pipe Elbow 90o for 15.88 mm outer dia SS

8812

pipe

8813

Elbow 90o for 22.22 mm outer dia SS

8814

pipe Elbow 90o for 28.58 mm outer dia

8815

SS pipe Elbow 90o for 34.00 mm outer

8816

dia SS pipe Elbow 90o for 42.70 mm

Code
No.

8802
8803

8817
8818
8819
8820
8821
8822
8823
8824
8825

outer dia SS pipe

Elbow 90o for 48.60 mm outer dia SS pipe
Reducing Elbow 90o for 22.22 mm X 15.88 mm outer dia SS
pipe Reducing Elbow 90o for 28.58 mm X 15.88 mm outer dia
SS pipe Reducing Elbow 90o for 28.58 mm X 22.22 mm outer
dia SS pipe Reducing Elbow 90o for 34.00 mm X 22.22 mm
outer dia SS pipe Reducing Elbow 90o for 34.00 mm X 28.58
mm outer dia SS pipe Reducing Elbow 90o for 42.70 mm X
34.00 mm outer dia SS pipe Equal Tee for 15.88 mm outer dia

8826

SS pipe

8827

Equal Tee for 22.22 mm outer dia SS

8828

pipe Equal Tee for 28.58 mm outer dia

8829

SS pipe Equal Tee for 34.00 mm outer

8830

dia SS pipe Equal Tee for 42.70 mm

8831

outer dia SS pipe Equal Tee for 48.60

8832

mm outer dia SS pipe

8833

Reducing Tee for 22.22 mm X 15.88 mm outer dia SS

8834

pipe Reducing Tee for 28.58 mm X 15.88 mm outer dia

8835

SS pipe Reducing Tee for 28.58 mm X 22.22 mm outer

8836

dia SS pipe Reducing Tee for 34.00 mm X 15.88 mm

8837

outer dia SS pipe Reducing Tee for 34.00 mm X 22.22

8838

mm outer dia SS pipe Reducing Tee for 34.00 mm X

8839

28.58 mm outer dia SS pipe Reducing Tee for 42.70 mm

X 15.88 mm outer dia SS pipe Reducing Tee for 42.70

mm

dia SS pipe
Reducing Tee for 42.70
mm X 34.00 mm outer
dia SS pipe

Unit
Rate `

e
a
c
h
4
7
0.

304

00 each

474.00 each 479.00 each

113.00 each
each

184.00 each

522.00

each

280.00

349.00

each

291.00

86.00 each

each

548.00

236.00 each

490.00 each 609.00 each

each

153.00 each

211.00 each

429.00

each

558.00

each

657.00 each

808.00 each

148.00

each

564.00

each

216.00 each 221.00 each

321.00 each

each

819.00

396.00 each 698.00 each

159.00

each

each

821.00

231.00 each 296.00 each

617.00

each

each

822.00

each

830.00

864.00 each

1028.00 each

225.00

SUB HEAD : 18 - WATER SUPPLY

Code
No.

8840
8841
8842
8843
8844
8845
8846
8847
8848
8849
8850
8851
8852
8853
8854
8855
8856
8857
8858
8859
8860
8861
8862
8863

Description

Unit

Rate `

Reducing Tee for 48.60 mm X 15.88 mm outer dia SS

each

894.00

pipe Reducing Tee for 48.60 mm X 22.22 mm outer dia

each

913.00

SS pipe Reducing Tee for 48.60 mm X 28.58 mm outer

each

920.00

dia SS pipe Reducing Tee for 48.60mm X 34.00 mm

each

958.00

outer dia SS pipe Reducing Tee for 48.60mm X 42.70mm

each

993.00

each

286.00

Male thread Tee for 22.22 mm outer dia X 15 mm nominal

dia threaded

each

344.00

Male thread Tee for 22.22 mm outer dia X 20 mm nominal

dia threaded

each

368.00

Male thread Tee for 28.58 mm outer dia X 15 mm nominal

dia threaded

each

414.00

Male thread Tee for 28.58 mm outer dia X 20 mm nominal

dia threaded

each

432.00

Male thread Tee for 28.58 mm outer dia X 20 mm nominal

dia threaded

each

483.00

Male thread Tee for 34.00 mm outer dia X 15 mm nominal

dia threaded

each

602.00

Male thread Tee for 34.00 mm outer dia X 20 mm nominal

dia threaded

each

651.00

Male thread Tee for 34.00 mm outer dia X 25 mm nominal

dia threaded

each

777.00

Male thread Tee for 34.00 mm outer dia X 32 mm nominal

dia threaded

each

981.00

Male thread Tee for 42.70 mm outer dia X 15 mm nominal

dia threaded

each

919.00

Male thread Tee for 42.70 mm outer dia X 20 mm nominal

dia threaded

each

941.00

Male thread Tee for 42.70 mm outer dia X 25 mm nominal

dia threaded

each

1024.00

Male thread Tee for 42.70 mm outer dia X 32 mm nominal

dia threaded

each

1137.00

Male thread Tee for 42.70 mm outer dia X 40 mm nominal

dia threaded

each

1381.00

Male thread Tee for 48.60 mm outer dia X 15 mm nominal

dia threaded

each

1000.00

Male thread Tee for 48.60 mm outer dia X 20 mm nominal

dia threaded

each

1030.00

Male thread Tee for 48.60 mm outer dia X 25 mm nominal

dia threaded

each

1074.00

Male thread Tee for 48.60 mm outer dia X 32 mm nominal

dia threaded

each

1290.00

outer dia SS pipe

Male thread Tee for 15.88 mm outer dia X 15 mm nominal
dia threaded

SUB HEAD : 18 - WATER SUPPLY

305

Code
No.

Description

Unit

Rate `

8864

Male thread Tee for 48.60 mm outer dia X 40 mm nominal

dia threaded

each

1431.00

8865

Male thread Tee for 48.60 mm outer dia X 50 mm nominal

dia threaded

each

1749.00

8866

Female thread Tee for 15.88 mm outer dia X 15 mm nominal

dia threaded

each

292.00

8867

Female thread Tee for 22.22 mm outer dia X 15 mm nominal

dia threaded

each

344.00

8868

Female thread Tee for 22.22 mm outer dia X 20 mm nominal

dia threaded

each

356.00

8869

Female thread Tee for 28.58 mm outer dia X 15 mm nominal

dia threaded

each

445.00

8870

Female thread Tee for 28.58 mm outer dia X 20 mm nominal

dia threaded

each

455.00

8871

Female thread Tee for 28.58 mm outer dia X 25 mm nominal

dia threaded

each

498.00

8872

Female thread Tee for 34.00 mm outer dia X 15 mm nominal

dia threaded

each

668.00

8873

Female thread Tee for 34.00 mm outer dia X 20 mm nominal

dia threaded

each

679.00

8874

Female thread Tee for 34.00 mm outer dia X 25 mm nominal

dia threaded

each

766.00

8875

Female thread Tee for 34.00 mm outer dia X 32 mm nominal

dia threaded

each

910.00

8876

Female thread Tee for 42.70 mm outer dia X 15 mm nominal

dia threaded

each

894.00

8877

Female thread Tee for 42.70 mm outer dia X 20 mm nominal

dia threaded

each

910.00

8878

Female thread Tee for 42.70 mm outer dia X 25 mm nominal

dia threaded

each

1022.00

8879

Female thread Tee for 42.70 mm outer dia X 32 mm nominal

dia threaded

each

1067.00

8880

Female thread Tee for 42.70 mm outer dia X 40 mm nominal

dia threaded

each

1162.00

8881

Female thread Tee for 48.60 mm outer dia X 15 mm nominal

dia threaded

each

1065.00

8882

Female thread Tee for 48.60 mm outer dia X 20 mm nominal

dia threaded

each

1076.00

8883

Female thread Tee for 48.60 mm outer dia X 25 mm nominal

dia threaded

each

1115.00

8884

Female thread Tee for 48.60 mm outer dia X 32 mm nominal

dia threaded

each

1184.00

8885

Female thread Tee for 48.60 mm outer dia X 40 mm nominal

dia threaded

each

1233.00

306

SUB HEAD : 18 - WATER SUPPLY

Code
No.

Description

Unit

Rate `

8886

Female thread Tee for 48.60 mm outer dia X 50 mm nominal

dia threaded

each

1366.00

8887

Female threaded Connector/Adapter for 15.88 mm outer dia

X 15 mm nominal threaded

each

190.00

8888

Female threaded Connector/Adapter for 22.22 mm outer dia X

15 mm nominal threaded

each

230.00

8889

Female threaded Connector/Adapter for 22.22 mm outer dia X

20 mm nominal threaded

each

237.00

8890

Female threaded Connector/Adapter for 28.58 mm outer dia X

15 mm nominal threaded

each

277.00

8891

Female threaded Connector/Adapter for 28.58 mm outer dia X

20 mm nominal threaded

each

286.00

8892

Female threaded Connector/Adapter for 28.58 mm outer dia X

25 mm nominal threaded

each

337.00

8893

Female threaded Connector/Adapter for 34.00 mm outer dia

X 25 mm nominal threaded

each

409.00

8894

Female threaded Connector/Adapter for 34.00 mm outer dia X

32 mm nominal threaded

each

538.00

8895

Female threaded Connector/Adapter for 42.70 mm outer dia X

32 mm nominal threaded

each

576.00

8896

Female threaded Connector/Adapter for 42.70 mm outer dia X

40 mm nominal threaded

each

681.00

8897

Female threaded Connector/Adapter for 48.60 mm outer dia X

40 mm nominal threaded

each

838.00

8898

Female threaded Connector/Adapter for 48.60 mm outer dia X

50 mm nominal threaded

each

965.00

8899

Male threaded Connector/Adapter for 15.88 mm outer dia X

15 mm nominal threaded

each

193.00

8900

Male threaded Connector/Adapter for 22.22 mm outer dia X

15 mm nominal threaded

each

227.00

8901

Male threaded Connector/Adapter for 22.22 mm outer dia X

20 mm nominal threaded

each

248.00

8902

Male threaded Connector/Adapter for 28.58 mm outer dia X

20 mm nominal threaded

each

313.00

8903

Male threaded Connector/Adapter for 28.58 mm outer dia X

25 mm nominal threaded

each

320.00

8904

Male threaded Connector/Adapter for 34.00 mm outer dia X

25 mm nominal threaded

each

461.00

8905

Male threaded Connector/Adapter for 34.00 mm outer dia X

32 mm nominal threaded

each

565.00

8906

Male threaded Connector/Adapter for 42.70 mm outer dia

X 32 mm nominal threaded

each

649.00

8907

Male threaded Connector/Adapter for 42.70 mm outer dia

X 40 mm nominal threaded

each

726.00

SUB HEAD : 18 - WATER SUPPLY

307

Code
No.

Description

Unit

Rate `

8908

Male threaded Connector/Adapter for 48.60 mm outer dia

X 40 mm nominal threaded

each

840.00

8909

Male threaded Connector/Adapter for 48.60 mm outer dia

X 50 mm nominal threaded

each

1138.00

8910

Valve Connector for 15.88 mm outer dia X 15 mm nominal dia

threaded

each

234.00

8911

Valve Connector for 22.22 mm outer dia X 15 mm nominal dia

threaded

each

276.00

8912

Valve Connector for 22.22 mm outer dia X 20 mm nominal dia

threaded

each

295.00

8913

Valve Connector for 28.58 mm outer dia X 25 mm nominal dia

threaded

each

424.00

8914

Valve Connector for 34.00 mm outer dia X 32 mm nominal dia

threaded

each

629.00

8915

Valve Connector for 42.70 mm outer dia X 40 mm nominal dia

threaded

each

875.00

8916

Valve Connector for 48.60 mm outer dia X 50 mm nominal dia

threaded

each

1176.00

8917

Female Threaded Elbow 90 for 15.88 mm outer dia X 15

mm nominal dia threaded

each

205.00

8918

Female Threaded Elbow 90 for 22.22 mm outer dia X 15

mm nominal dia threaded

each

275.00

8919

Female Threaded Elbow 90 for 22.22 mm outer dia X 20

mm nominal dia threaded

each

284.00

8920

Female Threaded Elbow 90 for 28.58 mm outer dia X 25

mm nominal dia threaded

each

421.00

8921

Female Threaded Elbow 90 for 34.00 mm outer dia X 32

mm nominal dia threaded

each

733.00

8922

Female Threaded Elbow 90 for 42.70 mm outer dia X 32

mm nominal dia threaded

each

920.00

8923

Female Threaded Elbow 90 for 42.70 mm outer dia X 40

mm nominal dia threaded

each

995.00

8924

Female Threaded Elbow 90 for 48.60 mm outer dia X 40

mm nominal dia threaded

each

1103.00

8925

Female Threaded Elbow 90 for 48.60 mm outer dia X 50

mm nominal dia threaded

each

1286.00

8926

Male Threaded Elbow 90 for 15.88 mm outer dia X 15

mm nominal dia threaded

each

216.00

8927

Male Threaded Elbow 90 for 22.22 mm outer dia X 15

mm nominal dia threaded

each

273.00

8928

Male Threaded Elbow 900 for 22.22 mm outer dia X 20

mm nominal dia threaded

each

288.00

8929

Male Threaded Elbow 900 for 28.58 mm outer dia X 25

mm nominal dia threaded

each

377.00

308

SUB HEAD : 18 - WATER SUPPLY

Code
No.

Description

Unit

Rate `

8930

MaleThreaded Elbow 90 for 34.00 mm outer dia X 25

mm nominal dia threaded

each

605.00

8931

Male Threaded Elbow 90 for 34.00 mm outer dia X 32

mm nominal dia threaded

each

736.00

8932

Male Threaded Elbow 90 for 42.70 mm outer dia X 32

mm nominal dia threaded

each

934.00

8933

Male Threaded Elbow 90 for 42.70 mm outer dia X 40

mm nominal dia threaded

each

1060.00

8934

Male Threaded Elbow 90 for 48.60 mm outer dia X 40

mm nominal dia threaded

each

1190.00

8935

Male Threaded Elbow 90 for 48.60 mm outer dia X 50

mm nominal dia threaded

each

1449.00

Cap for 15.88 mm outer dia pipe

each

45.00

Cap for 22.22 mm outer dia pipe

each

64.00

Cap for 28.58 mm outer dia pipe

each

84.00

Cap for 34.00 mm outer dia pipe

each

173.00

Cap for 42.70 mm outer dia pipe

each

253.00

Cap for 48.60 mm outer dia pipe

each

330.00

Pipe Bridge for 15.88 mm outer dia pipe

each

214.00

Pipe Bridge for 15.88 mm outer dia pipe

each

271.00

Pipe Bridge for 28.58 mm outer dia pipe

each

407.00

Sundries

L.S.

1.78

8936
8937
8938
8939
8940
8941
8942
8943
8944
9999

SUB HEAD : 18 - WATER SUPPLY

309

18.0 WATER SUPPLY

Code No.

Description

Unit

Rate `

PE - AL - PE COMPOSITE PRESSURE PIPES

18.1

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)

Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized
with carbon black having thermal stability for hot & cold water supply,
capable to withstand temperature up to 80 0C, including all special
fittings of composite material (engineering plastic blend and brass
inserts wherever required) e.g. elbows, tees, reducers, couplers &
connectors etc., with clamps at 1.00 metre spacing. This includes
testing of joints complete as per direction of the Engineer in charge.
Internal work - Exposed on wall

18.2

18.1.1

1216 (16 mm OD) pipe

metre

216.50

18.1.2

1620 (20 mm OD) pipe

metre

269.20

18.1.3

2025 (25 mm OD) pipe

metre

329.45

18.1.4

2532 (32 mm OD) pipe

metre

409.95

18.1.5

3240 (40 mm OD) pipe

metre

641.95

18.1.6

4050 (50 mm OD) pipe

metre

694.80

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)

Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized
with carbon black having thermal stability for hot & cold water supply,
capable to withstand temperature up to 80 0C, including all special
fittings of composite material (engineering plastic blend and brass
inserts wherever required) e.g. elbows, tees, reducers, couplers &
connectors etc., with clamps at 1.00 metre spacing. This includes the
costs of cutting chases and including testing of joints complete as per
direction of the engineer in charge.
Concealed work, including cutting chases and making good the wall etc.

18.3

18.2.1

1216 (16 mm OD) pipe

metre

351.30

18.2.2

1620 (20 mm OD) pipe

metre

412.25

18.2.3

2025 (25 mm OD) pipe

metre

483.40

18.2.4

2532 (32 mm OD) pipe

metre

574.85

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)

Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized
with carbon black having thermal stability for hot & cold water supply,
capable to withstand temperature up to 80 0C, including all special
fittings of composite material (engineering plastic blend and brass
inserts wherever required) e.g. elbows, tees, reducers, couplers &
connectors etc., with trenching, refilling and testing of joints complete
as per direction of the engineer in charge.
External work
18.3.1

1216 (16 mm OD) pipe

metre

204.05

18.3.2

1620 (20 mm OD ) pipe

metre

249.35

18.3.3

2025 (25 mm OD ) pipe

metre

18.3.4

2532 (32 mm OD ) pipe

302.20
metre

370.15

310

SUB HEAD : 18 - WATER SUPPLY

Code No.

Description

18.3.5
pipe

3240 (40 mm OD )

18.3.6
pipe

4050 (50 mm OD )

Unit

Rate `

metre

584.50

metre

637.35

PP- R PIPES
18.4

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)

pipes SDR 7.4, U V stabilized & anti - microbial fusion welded, having
thermal stability for hot & cold water supply, including all PP - R plain &
brass threaded polypropylene random fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes testing of joints complete as
per direction of Engineer in Charge.
Internal work - Exposed on wall

18.5

18.4.1

PN - 16 Pipe, 16 mm OD

metre

128.90

18.4.2

PN - 16 Pipe, 20 mm OD

metre

166.55

18.4.3

PN - 16 Pipe, 25 mm OD

metre

220.75

18.4.4

PN - 16 Pipe, 32 mm OD

metre

314.80

18.4.5

PN - 16 Pipe, 40 mm OD

metre

450.15

18.4.6

PN - 16 Pipe, 50 mm OD

metre

631.35

Providing and fixing 3 layer PP-R (Poly propylene Random

copolymer) pipes SDR 7.4, U V stabilized & anti - microbial fusion
welded, having thermal stability for hot & cold water supply, including
all PP - R plain & brass threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing. This includes the cost
of cutting chases and making good the same including testing of
joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls
etc.,

18.6

18.5.1

PN - 16 Pipe, 16 mm OD

metre

233.40

18.5.2

PN - 16 Pipe, 20 mm OD

metre

274.05

18.5.3

PN - 16 Pipe, 25 mm OD

metre

337.05

18.5.4

PN - 16 Pipe, 32 mm OD

metre

446.80

116.45

Providing and fixing 3 layer PP-R (Poly propylene Random

copolymer) pipes, U V stabilized & anti - microbial fusion welded,
having thermal stability for hot & cold water supply, including all PP R plain & brass threaded polypropylene random fittings, including
trenching, refilling & testing of joints complete as per direction of
Engineer in Charge. External work
18.6.1

PN - 16 Pipe, 16 mm OD (SDR - 7.4)

metre

18.6.2

PN - 16 Pipe, 20 mm OD (SDR - 7.4)

metre

18.6.3

PN - 16 Pipe, 25 mm OD (SDR - 7.4)

146.65

metre

18.6.4

PN - 16 Pipe, 32 mm OD (SDR - 7.4)

198.95

metre

18.6.5

PN - 16 Pipe, 40 mm OD (SDR - 7.4)

280.45

metre

18.6.6

PN - 16 Pipe, 50 mm OD (SDR - 7.4)

392.75

metre

18.6.7

PN - 16 Pipe, 63 mm OD (SDR - 7.4)

573.95

metre

18.6.8

PN - 16 Pipe, 75 mm OD (SDR - 7.4)

862.90

metre

18.6.9

PN - 16 Pipe, 90 mm OD (SDR - 7.4)

1145.25

metre

1726.50

SUB HEAD : 18 - WATER SUPPLY

311

Code No.

Description

18.6.10
18.6.11

PN - 10 Pipe, 110 mm OD (SDR 11)

Unit

Rate `

metre

1928.85

metre

3,954.75

metre

163.50

PN - 10 Pipe, 160 mm OD (SDR 11)

C.P.V.C. PIPES
18.7

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of
Engineer in Charge.
Internal work - Exposed on wall
18.7.1

15 mm nominal outer dia

Pipes 18.7.2

20 mm nominal outer

metre

190.55

dia Pipes 18.7.3

25 mm nominal outer

metre

231.30

dia Pipes 18.7.4

32 mm nominal outer

metre

296.70

dia Pipes 18.7.5

40 mm nominal outer

metre

407.90

metre

581.55

metre

270.00

dia Pipes
18.7.6
Pipes
18.8

50 mm nominal outer dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer in
Charge.
Concealed work, including cutting chases and making good the walls
etc.
18.8.1

15 mm nominal outer dia

Pipes 18.8.2

20 mm nominal outer

metre

296.40

dia Pipes 18.8.3

25 mm nominal outer

metre

351.30

metre

422.40

dia Pipes
18.8.4
Pipes
18.9

32 mm nominal outer dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement ,trenching ,refilling & testing of
joints complete as per direction of Engineer in Charge.
External work
18.9.1

18.9.7 18.9.8 18.9.9

15 mm nominal outer dia

18.9.2

18.9.10

Pipes 20 mm nominal

18.9.3

outer dia Pipes 25 mm

18.9.4

nominal outer dia Pipes

18.9.5

32 mm nominal outer dia

18.9.6

Pipes 40 mm nominal

outer dia Pipes 50

metre

143.65

metre

mm nominal outer

163.30

metre

dia Pipes 62.50

209.50

metre

mm nominal inner

262.35

metre

dia Pipes 75 mm

350.50

metre

nominal inner dia

524.10

metre

Pipes 100 mm

1462.35

metre

nominal inner dia

2051.25

metre

Pipes

2834.80

150 mm nominal
inner dia Pipes

metre

312

3426.25

SUB HEAD : 18 - WATER SUPPLY

Code
No.

18.10

Description

Unit

Rate `

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c
cutting and making good the walls etc.
Internal work - Exposed on wall

18.11

18.12

18.10.1

15 mm dia nominal bore

metre

215.10

18.10.2

20 mm dia nominal bore

metre

249.30

18.10.3

25 mm dia nominal bore

metre

304.15

18.10.4

32 mm dia nominal bore

metre

343.20

18.10.5

40 mm dia nominal bore

metre

425.65

18.10.6

50 mm dia nominal bore

metre

527.20

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,
i/c making good the walls etc. concealed pipe, including painting with
anti corrosive bitumastic paint, cutting chases and making good the wall
:
18.11.1

15 mm dia nominal bore

metre

306.05

18.11.2

20 mm dia nominal bore

metre

333.85

Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
External work

18.13

18.14

18.12.1

15 mm dia nominal bore

metre

186.25

18.12.2

20 mm dia nominal bore

metre

209.95

18.12.3

25 mm dia nominal bore

metre

257.30

18.12.4

32 mm dia nominal bore

metre

281.05

18.12.5

40 mm dia nominal bore

metre

334.15

18.12.6

50 mm dia nominal bore

metre

399.50

18.12.7

65 mm dia nominal bore

metre

524.25

18.12.8

80 mm dia nominal bore

metre

637.05

Making connection of G.I. distribution branch with G.I. main of

following sizes by providing and fixing tee, including cutting and
threading the pipe etc. complete :
18.13.1

25 to 40 mm nominal bore

each

367.75

18.13.2

50 to 80 mm nominal bore

each

761.10

each

315.50

each

260.60

each

280.95

Fixing water meter and stop cock in G.I. pipe line including cutting
and threading the pipe and making long screws etc. complete (cost of
water
meter and stop cock to be paid separately).
BRASS FITTINGS

18.15

Providing and fixing brass bib cock of approved quality :

18.15.1
18.15.2

15 mm nominal
bore
20 mm nominal
bore

18.16

Providing and fixing brass stop cock of approved quality :

18.16.1

18.16.2

15 mm nominal bore

20 mm nominal
bore

each

SUB HEAD : 18 - WATER SUPPLY

260.60

each

344.85

313

Code
No.

18.17

18.18

18.19

Description

Unit

Rate `

Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
18.17.1

25 mm nominal bore

each

428.85

18.17.2

32 mm nominal bore.

each

501.50

18.17.3

40 mm nominal bore

each

585.50

18.17.4

50 mm nominal bore

each

750.75

18.17.5

65 mm nominal bore

each

18.17.6

80 mm nominal bore

1287.75
each

1920.60

Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
18.18.1

15 mm nominal bore

each

288.50

18.18.2

20 mm nominal bore

each

409.90

18.18.3

25 mm nominal bore

each

449.95

18.19.1.1 Horizontal

each

411.25

18.19.1.2 Vertical

each

446.10

18.19.2.1 Horizontal

each

553.30

18.19.2.2 Vertical

each

634.60

18.19.3.1 Horizontal

each

683.75

18.19.3.2 Vertical

each

904.45

18.19.4.1 Horizontal

each

988.70

18.19.4.2 Vertical

each

1209.40

18.19.5.1 Horizontal

each

18.19.5.2 Vertical

1769.60

Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
18.19.1

18.19.2

18.19.3

18.19.4

18.19.6

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

each

2025.15

18.19.6.1 Horizontal

2504.30

each 18.19.6.2 Vertical

3398.65

80 mm nominal bore

each
18.20

Providing and fixing brass ferrule with C.I. mouth cover including boring
and tapping the main :
18.20.1

15 mm nominal

18.20.2

bore 20

18.20.3

mm nominal bore
25 mm nominal

bore

each

245.95 each

283.40
each

18.21

366.80

Providing and fixing uplasticised PVC connection pipe with brass unions
: 18.21.1 30 cm length

314

SUB HEAD : 18 - WATER SUPPLY

Code No.

Description

Unit

Rate `

18.21.1.1 15 mm nominal
bore

each

60.10

each

65.90

18.21.2.1 15 mm nominal bore

each

68.60

18.21.2.2 20 mm nominal bore

each

83.70

each

72.05

each

86.35

18.21.1.2 20 mm nominal
bore
18.21.2

18.22
:

45 cm length

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

18.22.1
18.22.2

100 mm
diameter
150 mm
diameter

C.I/ DUCTILE IRON PIPES & SPECIALS

18.23

Laying in position centrifugally cast (spun) iron S&S or flanged

pipes (excluding cost of pipe).

quintal

137.40

18.24

Laying in position S&S or flanged C.I. special such as tees, bends,

collars, tapers and caps etc.(excluding cost of specials).

quintal

255.40

18.25

Providing and laying S&S C.I. standard specials such as tees,

bends, collars, tapers, caps etc. (Heavy class) :

18.26

18.27

18.25.1

Up to 300 mm dia

quintal

4447.80

18.25.2

Over 300 mm dia

quintal

4563.95

Providing and laying flanged C.I. standard specials such as tees,

bends, collars, tapers, caps etc., suitable for flanged jointing as per IS :
1538 :
18.26.1

Up to 300 mm dia

quintal

6654.65

18.26.2

Over 300 mm dia

quintal

7003.10

Providing and laying S&S centrifugally cast (spun) iron pipes (Class
LA) conforming to IS - 1536 :
18.27.1

100 mm dia pipe

metre

1075.25

18.27.2

125 mm dia pipe

metre

1339.95

18.27.3

150 mm dia pipe

metre

1616.75

18.27.4

200 mm dia pipe

metre

2743.50

18.27.5

250 mm dia pipe

metre

3582.15

18.27.6

300 mm dia pipe

metre

4829.35

18.27.7

350 mm dia pipe

metre

5792.95

18.27.8

400 mm dia pipe

metre

7630.60

18.27.9

450 mm dia pipe

metre

9239.55

18.27.10

500 mm dia pipe

metre

18.27.11

600 mm dia pipe

10726.85
metre

18.28

Providing lead caulked joints to spun iron or C.I. pipes and specials,

14998.40

including testing of joints but excluding the cost of pig lead :

18.28.1

100

mm

diameter

each

204.85

18.28.2

pipe

mm

each

302.30

18.28.3

diameter

150

each

307.60

18.28.4

mm diameter pipe

each

408.00

125
pipe

200 mm diameter
pipe
SUB HEAD : 18 - WATER SUPPLY

315

Code No.

Description

Unit

Rate `

diameter

each

509.70

mm

each

613.85

pipe

350

each

632.10

pipe

each

825.05

diameter

each

925.00

mm

each

979.00

500

each

1320.60

quintal

10464.50

18.28.5

250

mm

18.28.6

pipe

18.28.7

diameter

18.28.8

mm

diameter

18.28.9

400

mm

300

18.28.10 pipe
18.28.11

diameter

450
pipe

mm diameter pipe
600 mm diameter
pipe
18.29

Supplying pig lead at site of work.

18.30

Providing flanged joints to double flanged C.I./ D.I. pipes and specials,
including testing of joints :
18.30.1

80 mm diameter pipe

each

118.85

18.30.2

100 mm diameter pipe

each

195.70

18.30.3

125 mm diameter pipe

each

198.00

18.30.4

150 mm diameter pipe

each

234.55

18.30.5

200 mm diameter pipe

each

240.35

18.30.6

250 mm diameter pipe

each

359.00

18.30.7

300 mm diameter pipe

each

364.80

18.30.8

350 mm diameter pipe

each

499.45

18.30.9

400 mm diameter pipe

each

712.55

18.30.10 450 mm diameter pipe

each

882.05

18.30.11 500 mm diameter pipe

each

1004.55

18.30.12 600 mm diameter pipe

each

1178.95

each
each

3308.60
3921.30

each
each

3565.85
4643.15

each
each

4843.60
5694.00

each
each

9515.65
11579.00

C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES

18.31
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
18.31.1 100 mm diameter
18.31.1.1 Class I
18.31.1.2 Class II
18.31.2 125 mm diameter
18.31.2.1 Class I
18.31.2.2 Class II
18.31.3 150 mm diameter
18.31.3.1 Class I
18.31.3.2 Class II
18.31.4 200 mm diameter
18.31.4.1 Class I
18.31.4.2 Class II
18.31.5 250 mm diameter
18.31.5.1 Class I

18.31.5.2
Class II

each

13950.50
18.31.6

316

each

18520.65

300 mm diameter
SUB HEAD : 18 - WATER SUPPLY

Code
No.

18.32

Description

18.31.6.1 Class I
each 18.31.6.2 Class II
each
Constructing masonry Chamber 30x30x50 cm inside, in brick work in
cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.
surface box 100x100 x75 mm (inside) with hinged cover fixed in cement
concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), i/c necessary excavation, foundation
concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate
40mm nominal size ) and inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12mm thick, finished with a floating coat of
neat cement complete as per standard design :
18.32.1

18.33

19378.55
23025.60

each

1157.75

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

each

6754.30

each

11672.35

each

16095.10

Constructing masonry Chamber 90x90x100 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180
mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :
5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and
inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12
mm thick, finished with a floating coat of neat cement complete as per
standard design :
18.34.1

18.35

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

Rate `

Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.
surface box 100mm top diameter, 160 mm bottom diameter and 180
mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal
size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement
: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12
mm thick, finished with a floating coat of neat cement complete as per
standard design :
18.33.1

18.34

Unit

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

Constructing masonry Chamber 120x120x100 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with
C.I. surface box 100 mm top diameter, 160 mm bottom diameter and
180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
, i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm
thick, finished with a floating coat of neat cement complete as per
standard design :
18.35.1

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

18.36

Constructing masonry Chamber 60x60x75 cm, inside in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I.

SUB HEAD : 18 - WATER SUPPLY

317

Code No.

Description

Unit

Rate `

each

6431.70

each

6039.95

surface box 350x350 mm top and 165 mm deep ( inside) with chained
lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) , i/c necessary excavation,
foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone
aggregate 40 mm nominal size) and inside plastering with cement
mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a
floating coat of neat cement complete as per standard design :
18.36.1

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

18.37

Constructing masonry Chamber 60x45x50 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter
complete with C.I. double flap surface box 400x200x200 mm (inside)
with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c
necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine
sand:10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm
thick, finished with a floating coat of neat cement complete as per
standard design :
18.37.1

18.38

18.39

18.40

With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

Painting G.I. pipes and fittings with synthetic enamel white paint with
two coats over a ready mixed priming coat, both of approved quality for
new work :
18.38.1 15 mm diameter pipe
18.38.2 20 mm diameter pipe
18.38.3 25 mm diameter pipe
18.38.4 32 mm diameter pipe
18.38.5 40 mm diameter pipe
18.38.6 50 mm diameter pipe
Repainting G.I. pipes and fittings with synthetic enamel white paint
with one coat of approved quality :
18.39.1 15 mm diameter pipe
18.39.2 20 mm diameter pipe
18.39.3 25 mm diameter pipe
18.39.4 32 mm diameter pipe
18.39.5 40 mm diameter pipe
18.39.6 50 mm diameter pipe
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic
paint of approved quality :
18.40.1
18.40.5
18.40.2
18.40.3
18.40.4

metre
metre
11.35
14.95
17.70
21.00
metre

metre
metre
metre
7.4 metre
metre
10.15
metre

9.60
metre
metre
metre
24.75

4.95
5.75
8.75

12.00

15 mm diameter pipe 20
mm diameter pipe 25
mm diameter pipe 32
mm diameter pipe

40 mm diameter
pipe

metre
5.80

318

metre

6.85 metre
metre
10.40
metre

8.75

11.85

SUB HEAD : 18 - WATER SUPPLY

Code No.

Description

18.40.6
18.40.7
18.40.8

18.41

18.42

18.43
18.44
18.45
18.46

18.47

50 mm diameter
pipe 65 mm
diameter pipe
80 mm diameter
pipe
Providing and filling sand of grading zone V or coarser grade, allround
the G.I. pipes in external work :
18.41.1 15 mm diameter pipe
18.41.1A Sub analysis itemfor sand filling
18.41.2 component 20 mm diameter pipe
18.41.3 25 mm diameter pipe
18.41.4 32 mm diameter pipe
18.41.5 40 mm diameter pipe
18.41.6 50 mm diameter pipe
18.41.7 65 mm diameter pipe
18.41.8 80 mm diameter pipe
18.41.9 100 mm diameter
18.41.10 pipe
150 mm diameter pipe
Boring with 100 mm diameter casing pipe for hand pump / tubewell, in
all soils except ordinary hard rocks requiring blasting, including
removing the casing pipe after the hand pump / tube well is lowered and
tested :
18.42.1 Up to 6 metres depth
18.42.2 Beyond 6 m and up to 12 m depth
18.42.3 Beyond 12 m and up to 18 m depth

Unit

metre
14.15 metre
17.45
metre
20.25

metre
66.40 cum
897.00 metre
67.30 metre
69.05 metre
70.85 metre
71.75 metre
74.45 metre
117.50 metre
121.10 metre
128.25
metre
191.05

metre
323.05 metre
383.60
metre
446.50

Providing and placing in position filters of 40 mm diameter G.I. pipe with

brass strainer of approved quality.
metre
Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe
for tube well including cleaning and priming the tube well.
metre
Providing and placing in position hand pump of approved quality for 40
mm diameter G.I. pipe complete with all accessories.
each
Providing and fixing G.I. Union in G.I. pipe including cutting and
threading the pipe and making long screws etc. complete (New work) :
18.46.1
15 mm nominal bore
18.46.2
20 mm nominal bore
18.46.3
25 mm nominal bore
18.46.4
32 mm nominal bore
18.46.5
40 mm nominal bore
18.46.6
50 mm nominal bore
18.46.7
65 mm nominal bore
18.46.8 80 mm nominal bore
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and
threading the pipe and making long screws, including excavation,

Rate `

each
each
each
each
240.75
316.25
392.40
636.30
each

593.65
309.30
904.05

165.25
188.50
200.10
each
each
each
729.25

refilling the earth or cutting of wall and making good the same complete
wherever required :
18.47.1
15 mm nominal
18.47.2
bore 20
18.47.3
mm nominal bore
25 mm nominal
bore
SUB HEAD : 18 - WATER SUPPLY

each
360.50 each
383.70
each
395.30

319

Code No.

Description

Unit

18.47.4
18.47.5
18.47.6
18.47.7
18.47.8

18.48

32
mm nominal
each
bore
40
each
mm nominal
bore
511.45
50
mm nominal
bore
65
each
mm nominal bore
each
80 mm nominal
bore
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, ISI : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
per litre

Rate `

436.00
each
658.60
902.55
995.45

7.25

C.P. BRASS F ITTINGS

18.49

18.50

18.51

Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :
18.49.1 15 mm nominal bore
Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.

each

459.50

18.50.1

each

796.70

each

610.65

each

619.75

each

507.70

15mm nominal bore, 86 mm long, weighing not less than 88

gms

each

156.05

15 mm nominal bore, 122mm long, weighing not less than 99

gms

each

171.15

15 mm nominal bore, 165 mm long, weighing not less than

110 gms

each

202.50

15 mm nominal bore, 90 mm long, weighing not less than 93

gms

each

185.10

15 mm nominal bore, 86 mm long, weighing not less than

88 gms

each

156.05

20 mm nominal bore, 89 mm long, weighing not less than 88

gms

each

190.90

Concealed stop cock, 15 mm nominal bore, 108 mm long,

weighing not less than 108 gms

each

200.20

Providing and fixing C.P. brass long body bib cock of approved
quality conforming to IS standards and weighing not less than 690 gms.
18.51.1

18.52

15 mm nominal bore

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS:8931.
18.52.1

15 mm nominal bore

18.53
Providing and fixing C.P. brass angle valve for basin mixer and
geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
18.53.1

15mm nominal bore

PTMT FITTINGS
18.54

Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1
18.54.2
18.54.3
18.54.4

18.55

Providing and fixing PTMT stop cock of approved quality and colour.
18.55.1
18.55.2
18.55.3

18.56

Providing and fixing PTMT pillar cock of approved quality and colour .

320

SUB HEAD : 18 - WATER SUPPLY

Code No.

Description

Unit

Rate `

15 mm nominal bore, 107 mm long, weighing not less than

110 gms

each

228.70

15 mm nominal bore, 125 mm long foam flow, weighing not

less than 120 gms

each

298.40

15 mm nominal bore, 98 mm long, weighing not less than 75

gms

each

152.55

15 mm nominal bore, 80 mm long, weighing not less than 46

gms

each

121.20

18.58.1.1 100 mm nominal dia

each

49.25

18.58.1.2 125 mm nominal dia with 25 mm waste

hole

each

57.35

each

150.30

18.56.1
18.56.2
18.57

Providing and fixing PTMT, push cock of approved quality and colour.
18.57.1
18.57.2

18.58

Providing and fixing PTMT grating of approved quality and

colour. 18.58.1

18.58.2

Circular type

Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner

hinged round grating
AIR VALVE & WATER METER (BULK TYPE)
18.59

18.60

18.61

Providing and fixing C.I. double acting air valve of approved quality with
bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if
required will be paid separately) :
18.59.1

50 mm dia

each

4778.30

18.59.2

80 mm dia

each

6172.10

18.59.3

100 mm dia

each

8110.05

Providing and fixing enclosed type water meter (bulk type) conforming
to IS : 2373 and tested by Municipal Board complete with bolts, nuts,
rubber insertions etc. (The tail pieces if required will be paid separately)
:
18.60.1

80 mm dia nominal bore

each

3114.85

18.60.2

100 mm dia nominal bore

each

4654.40

18.60.3

150 mm dia nominal bore

each

6814.15

18.60.4

200 mm dia nominal bore

each

7397.85

3635.90

Providing and fixing C.I. dirt box strainer for bulk type water meter
with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373
:
18.61.1

80 mm dia

each

18.61.2

100 mm dia

each

18.61.3

150 mm dia

5872.35

18.61.4

200 mm dia

7432.45
each

18.62

Providing and fixing PTMT Ball cock of approved quality, colour and
make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.
plastic ball.
18.62.1

18.62.2

each
10385.60

15 mm nominal
bore, 105 mm
long, weighing not

less than
138 gms

each

232.75

20 mm nominal bore, 120 mm long, weighing not less than

SUB HEAD : 18 - WATER SUPPLY

321

Code No.

Description

18.62.3
18.62.4
18.62.5

18.63
18.64

Unit

Rate `

198 gms

each

285.60

25 mm nominal bore, 152mm long, weighing not less than 440

gms

each

40 mm nominal bore, 206mm long, weighing not less than 690

gms

each

554.50
1007.45

50 mm nominal bore, 242mm long, weighing not less than 1240

gms
each

1402.40

Providing and fixing PTMT angle stop cock 15mm nominal bore,weighing
not less than 85gms

each

190.90

Providing and fixing PTMT swivelling shower, 15 mm nominal bore,

weighing not less than 40 gms

each

141.75

each

164.95

18.65
Providing and fixing PTMT soap Dish Holder having length of
138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms.
18.66
Providing and laying S&S C.I. Standard specials such as tees,
bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 :

18.67

18.68

18.69

18.70

18.66.1

Up to 300 mm dia

quintal

6596.55

18.66.2

Above 300 mm dia

quintal

9790.70

Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS
: 13382 :
18.67.1

Up to 300 mm dia

quintal

10719.90

18.67.2

Above 300 mm dia

quintal

11300.65

Providing and laying D.I. specials of class K-12 suitable for push-on
jointing as per IS : 9523 :
18.68.1

Up to 600 mm dia

quintal

15365.90

18.68.2

Above 600 mm dia

quintal

21173.40

Providing and laying D.I. Specials of Class K - 12 suitable for

mechanical jointing as per IS : 9523 :
18.69.1

Up to 600 mm dia

quintal

16178.95

18.69.2

Above 600 mm dia

quintal

23089.90

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or

Ductile Iron Pipes including testing of joints and the cost of rubber
gasket :
18.70.1

100 mm dia pipes

joint

61.85

18.70.2

150 mm dia pipes

joint

96.15

18.70.3

200 mm dia pipes

joint

18.70.4

250 mm dia pipes

146.00

joint

18.70.5

300 mm dia pipes

177.25

joint

18.70.6

350 mm dia pipes

237.55

joint

18.70.7

400 mm dia pipes

257.30

joint

18.70.8

450 mm dia pipes

417.40

joint

18.70.9

500 mm dia pipes

481.20

joint

322

518.90
SUB HEAD : 18 - WATER SUPPLY

Code No.

18.71

Description

Unit

Rate `

18.70.10 600 mm dia pipes

joint

666.65

18.70.11

650 mm dia pipes

joint

934.75

18.70.12 700 mm dia pipes

joint

18.70.13 800 mm dia pipes

1068.30

joint

18.70.14 900 mm dia pipes

1177.35

joint

18.70.15 1000 mm dia

pipes

1508.10
joint

1775.05

Providing and laying Double Flanged (screwed / welded) Centrifugally

(Spun) Cast Iron, Class B (IS : 1536) :
18.71.1

100 mm dia C.I. Double Flanged

metre

1636.85

18.71.2

Pipe

Double

metre

2562.45

18.71.3

Flanged Pipe 200 mm dia C.I.

metre

4043.80

18.71.4

Double Flanged Pipe 250 mm dia

metre

4889.90

18.71.5

C.I. Double Flanged Pipe 300 mm

metre

6250.25

18.71.6

dia C.I. Double Flanged Pipe 350

metre

7870.50

18.71.7

mm dia C.I. Double Flanged Pipe

metre

18.71.8

400 mm dia C.I. Double Flanged

10184.60

metre

18.71.9

Pipe

Double

12967.40

metre

18.71.10 Flanged Pipe 500 mm dia C.I.

16102.60

150

450

mm

mm

dia

dia

C.I.

C.I.

Double Flanged Pipe

metre

22314.60

600 mm dia C.I. Double Flanged

Pipe
18.72

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes
conforming to IS : 8329 :
18.72.1

18.72.19

100 mm dia Ductile Iron

18.72.2

18.72.20

Class K-7 pipes 150 mm

18.72.3

dia Ductile Iron Class K-

18.72.4

7 pipes 200 mm dia

18.72.5

Ductile Iron Class K-7

18.72.6

pipes 250 mm dia

18.72.7

Ductile Iron Class K-7

18.72.8

pipes 300 mm dia

18.72.9

Ductile Iron Class K-7

18.72.10

pipes 350 mm dia

18.72.11

Ductile Iron Class K-7

18.72.12

pipes 400 mm dia

18.72.13

Ductile Iron Class K-7

18.72.14

pipes 450 mm dia

18.72.15

Ductile Iron Class K-7

18.72.16

pipes 500 mm dia

18.72.17

Ductile Iron Class K-7

18.72.18

pipes 600 mm dia

Ductile Iron Class K-

Iron Class K-9 pipes

metre

924.05

7 pipes 700 mm dia

metre

Ductile Iron Class K-

1336.70

metre

7 pipes 800 mm dia

1849.00

metre

Ductile Iron Class K-

2503.55

metre

7 pipes 900 mm dia

3447.75

metre

Ductile Iron Class K-

4110.05

metre

7 pipes 1000 mm dia

4795.60

metre

Ductile Iron Class K-

5791.20

metre

7 pipes 100 mm dia

6837.70

metre

Ductile Iron Class K-

8923.50

metre

9 pipes 150 mm dia

11470.10

metre

Ductile Iron Class K-

14433.80

metre

9 pipes 200 mm dia

19121.30

metre

Ductile Iron Class K-

20351.20

metre

9 pipes 250 mm dia

1130.55

metre

Ductile Iron Class K-

1434.40

metre

9 pipes 300 mm dia

1973.45

metre

Ductile Iron Class K-

3851.25

metre

9 pipes

3487.55

350 mm dia Ductile

metre

SUB HEAD : 18 - WATER SUPPLY

4250.90

323

Code No.

Description

Unit

Rate `

18.72.21 400 mm dia Ductile Iron Class K-9

metre

5381.60

18.72.22 pipes 450 mm dia Ductile Iron Class K-

metre

6222.30

18.72.23 9 pipes 500 mm dia Ductile Iron Class

metre

7850.60

18.72.24 K-9 pipes 600 mm dia Ductile Iron

metre

9487.50

18.72.25 Class K-9 pipes 700 mm dia Ductile

metre

18.72.26 Iron Class K-9 pipes 750 mm dia

13105.45

metre

18.72.27 Ductile Iron Class K-9 pipes 800 mm

14222.75

metre

18.72.28 dia Ductile Iron Class K-9 pipes 900

14395.10

metre

18.72.29 mm dia Ductile Iron Class K-9 pipes

17373.30

1000 mm dia Ductile Iron Class K-9

pipes
18.73

18.74

18.75

18.76

19544.90

2564.75

Providing and laying Double Flanged (Screwed / Welded) Centrifugally

(Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
18.73.1

100 mm dia Ductile Iron Double

metre

18.73.2

Flanged 150 mm dia Ductile Iron

metre

18.73.3

Double Flanged 200 mm dia Ductile

4114.55

18.73.4

Iron Double Flanged 250 mm dia

18.73.5

Ductile Iron Double Flanged 300 mm

metre

4070.15

18.73.6

dia Ductile Iron Double Flanged 350

metre

8201.90

18.73.7

mm dia Ductile Iron Double Flanged

metre

18.73.8

400 mm dia Ductile Iron Double

10364.80

metre

18.73.9

Flanged 450 mm dia Ductile Iron

12496.50

metre

18.73.10 Double Flanged 500 mm dia Ductile

15189.00

metre

18.73.11

Iron Double Flanged 600 mm dia

17772.00

metre

Ductile Iron Double Flanged

24280.20

700 mm dia Ductile Iron Double

Flanged

metre

30114.80

metre
4841.85

Providing and fixing unplasticised P.V.C. connection pipe with PTMT

Nuts, collar and bush of approved quality and colour.
18.74.1

15 mm nominal bore with 30cm length

each

62.45

18.74.2

15 mm nominal bore with 45 cm length

each

74.70

Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour.
18.75.1

15 mm nominal bore, weighing not less than 32 gms

each

44.15

18.75.2

20 mm nominal bore, weighing not less than 40 gms

each

51.15

18.75.3

25mm nominal bore, weighing not less than 62 gms

each

73.20

each

207.95

each

193.00

Cutting holes up to 30x30 cm in walls including making good the same:

18.76.1

18.77

metre

With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe etc.
with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20
mm nominal size), including finishing complete so as to make it leak proof.

18.78

Making chases up to 7.5x7.5 cm in walls including making good and

finishing with matching surface after housing G.I. pipe etc.

metre

85.70

18.79
Making hole up to 20x20 cm and embedding pipes up to 150 mm
diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse

324

SUB HEAD : 18 - WATER SUPPLY

Code
No.

18.80

18.81

18.82

Description

Unit

sand 6 graded stone aggregate 20 mm nominal size) including disposal

of malba.
metre

Rate `

130.80

Disinfecting C.I. water mains by flushing with water containing

bleaching powder @ 0.5 gms per litre of water and cleaning the same
with fresh water, operation to be repeated three times including getting
the sample of water from the disinfected main tested in the municipal
laboratory.
18.80.1

80 mm diameter C.I. pipe

100 metre

704.00

18.80.2

100 mm diameter C.I. pipe

100 metre

926.60

18.80.3

125 mm diameter C.I. pipe

100 metre 1159.95

18.80.4

150 mm diameter C.I. pipe

100 metre 1395.40

18.80.5

200 mm diameter C.I. pipe

100 metre 1868.90

18.80.6

250 mm diameter C.I. pipe

100 metre 2361.00

18.80.7

300 mm diameter C.I. pipe

100 metre 2641.60

18.80.8

350 mm diameter C.I. pipe

100 metre 2933.85

18.80.9

400 mm diameter C.I. pipe

100 metre 3244.80

18.80.10 450 mm diameter C.I. pipe

100 metre 3562.50

18.80.11 500 mm diameter C.I. pipe

100 metre

3899.60

18.80.12 600 mm diameter C.I. pipe

100 metre

4591.55

Extra for every operation of disinfecting the C.I. main by flushing

with water containing bleaching powder @ 0.5 gms per litre of water
and cleaning the same with fresh water, including getting the samples of
water tested in the municipal laboratory :
18.81.1

80 mm diameter C.I. pipe

100 metre

258.05

18.81.2

100 mm diameter C.I. pipe

100 metre

315.95

18.81.3

125 mm diameter C.I. pipe

100 metre

386.85

18.81.4

150 mm diameter C.I. pipe

100 metre

452.25

18.81.5

200 mm diameter C.I. pipe

100 metre

689.90

18.81.6

250 mm diameter C.I. pipe

100 metre

796.65

18.81.7

300 mm diameter C.I. pipe

100 metre

899.00

18.81.8

350 mm diameter C.I. pipe

100 metre 1057.75

18.81.9

400 mm diameter C.I. pipe

100 metre 1218.95

18.81.10 450 mm diameter C.I. pipe

100 metre 1386.10

18.81.11

500 mm diameter C.I. pipe

100 metre

1555.05

18.81.12 600 mm diameter C.I. pipe

100 metre

1902.00

Dismantling old C.I. pipes including excavation and refilling trenches

after taking out the pipes, breaking lead caulked joints, melting of
lead and making into blocks, including stacking of pipes at site lead up
to 50 metre:
18.82.1

80 mm diameter C.I. pipe

18.82.2

100 mm diameter C.I.

18.82.3

pipe 125 mm diameter

18.82.4

C.I. pipe

150 mm diameter C.I.

pipe

metre

162.00

metre
168.70

SUB HEAD : 18 - WATER SUPPLY

metre

175.10

metre

181.70

325

Code No.

Description

Unit

Rate `

18.82.5

200 mm diameter C.I.

metre

202.60

18.82.6

pipe 250 mm diameter

metre

223.10

18.82.7

C.I.

mm

metre

241.10

18.82.8

diameter C.I. pipe 350

metre

257.90

18.82.9

mm diameter C.I. pipe

metre

273.50

18.82.10 400 mm diameter C.I.

metre

289.55

18.82.11

metre

303.55

metre

328.25

pipe

300

pipe 450 mm diameter

18.82.12 C.I.

pipe

500

mm

diameter C.I. pipe

600 mm diameter C.I.
pipe
18.83

Labour for cutting C.I. pipe with steel saw.

18.83.1

80 mm diameter C.I. pipe

Each cut

57.00

18.83.2

100 mm diameter C.I.

Each cut

76.65

18.83.3

pipe 125 mm diameter

Each

18.83.4

C.I. pipe 150 mm

106.75

Each

cut

18.83.5

diameter C.I. pipe 200

144.15

Each

cut

18.83.6

mm diameter C.I. pipe

192.25

Each

cut

18.83.7

250 mm diameter C.I.

238.50

Each

cut

18.83.8

pipe 300 mm diameter

286.65

Each

cut

18.83.9

C.I. pipe 350 mm

332.90

Each

cut

18.83.10 diameter C.I. pipe 400

380.75

Each

cut

18.83.11

mm diameter C.I. pipe

427.30

Each

cut

18.83.12 450 mm diameter C.I.

475.15

pipe 500 mm diameter

Each cut

cut

565.75

C.I. pipe
600 mm diameter C.I.
pipe
18.84

Providing & fixing chrome plated brass battery based infrared sensor
operated pillar cock, having foam flow technology.
18.84.1

18.85

15 mm nominal bore

each

6778.90

Providing and fixing Stainless Steel pipe and fitting of grade AISI 304
as per JIS standard 3448 complete with press type fitting (fitting shall
be paid for separately) i/c fixing of the pipe with clamps at 1.00 m
spacing including cutting and making good the walls including testing
of joints complete as per direction of Engineer -in-charge. (The pipe
length inserted in the fitting shall not be measured for payment) Inernal
work - Exposed on wall
18.85.1

18.85.6

15.88 mmouter diapipe

18.85.2

22.22 mm outer dia Pipe

18.85.3

28.58 mm outer dia Pipe

18.85.4

34.00 mm outer dia Pipe

18.85.5

42.70 mm outer dia Pipe

48.60 mm outer dia

Pipe

metre

475.90 metre

248.70 metre

644.20 metre

382.90 metre

783.50
metre

18.86

326

903.05

Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as
per JIS standard 3448 complete with press type fitting (fitting shall be
paid for separately) i/c fixing of the pipe with clamps at 1.00m spacing
and also including cutting of chases and making good the walls
including testing of
SUB HEAD : 18 - WATER SUPPLY

Code No.

Description

Unit

Rate `

joints complete as per direction of Engineer -in-charge. (The pipe length

inserted in the fitting shall not be measured for payment) Internal work
-Concealed Pipe

18.87

18.86.1

15.88 mm outer dia .Pipes.

metre

333.85

18.86.2

22.22 mm Outer dia pipes

metre

468.00

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Coupling/Socket

18.88

18.87.1

For 15.88 mm outer dia pipe

each

66.20

18.87.2

For 22.22 mm outer dia pipe

each

102.20

18.87.3

For 28.58 mm outer dia pipe

each

125.45

18.87.4

For 34.00 mm outer dia pipe

each

268.30

18.87.5

For 42.70 mm outer dia pipe

each

383.30

18.87.6

For 48.60 mm outer dia pipe

each

518.05

Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of Providing
and fixing required Stainless Steel Fitting of press fit design of grade
AISI 304 conforming toJWWA G116 standard with V-profile or M-profile
and with O-ring sealing gasket of EPDM material of required dia as per
dirction of Engineer-in-charge.
Reducer
18.88.1

For 22.22 mm x 15.88 mm outer dia pipe

each

119.65

18.88.2

For 28.58 mm x 15.88 mm outer dia pipe

each

163.75

18.88.3

For 28.58 mm x 22.22 mm outer dia pipe

each

168.40

18.88.4

For 34.00 mm x 15.88 mm outer dia pipe

each

271.80

18.88.5

For 34.00 mm x 22.22 mm outer dia pipe

each

275.30

18.88.6

For 34.00 mm x 28.58 mm outer dia pipe

each

275.30

18.88.7

For 42.70 mm x 15.88 mm outer dia pipe

each

417.00

18.88.8

For 42.70 mm x 22.22 mm outer dia pipe

each

420.45

18.88.9

For 42.70 mm x 28.58 mm outer dia pipe

each

420.45

18.88.10 For 42.70 mm x 34.00 mm outer dia pipe

each

449.50

18.88.11

each

For 48.60 mm x 15.88 mm outer dia pipe

18.88.12 For 48.60 mm x 22.22 mm outer dia pipe

543.60

each

18.88.13 For 48.60 mm x 28.58 mm outer dia pipe

545.90

each

18.88.14 For 48.60 mm x 34.00 mm outer dia pipe

550.55

each

18.88.15 For 48.60 mm x 42.70 mm outer dia pipe

556.35
each

18.89

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of required
dia as

606.30

SUB HEAD : 18 - WATER SUPPLY

327

Code
No.

Description

Unit

Rate `

18.89.1 For 15.88 mm outer dia pipe

each

131.25

18.89.2 For 22.22 mm outer dia pipe

each

213.70

18.89.3 For 28.58 mm outer dia pipe

each

274.10

18.89.4 For 34.00 mm outer dia pipe

each

405.35

18.89.5 For 42.70 mm outer dia pipe

each

569.15

18.89.6 For 48.60 mm outer dia pipe

each

707.35

per dirction of Engineer-incharge. Slip Coupling/ Socket

18.90

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of required
dia as per dirction of Engineer-in-charge.
Elbow 90o

18.91

18.90.1

For 15.88mm outer dia pipe

each

99.90

18.90.2

For 22.22 mm outer dia pipe

each

177.70

18.90.3

For 28.58 mm outer dia pipe

each

245.10

18.90.4

For 34.00 mm outer dia pipe

each

498.30

18.90.5

For 42.70 mm outer dia pipe

each

763.10

18.90.6

For 48.60 mm outer dia pipe

each

938.50

Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of required
dia as per dirction of Engineer-in-charge.
Reducing Elbow 90o

18.92

18.91.1

For22.22 mm x 15.88 mm outer dia pipe

each

171.90

18.91.2

For 28.58 mm x 15.88 mm outer dia pipe

each

250.90

18.91.3

For 28.58 mm x 22.22 mm outer dia pipe

each

256.70

18.91.4

For 34.00 mm x 22.22 mm outer dia pipe

each

372.85

18.91.5

For 34.00 mm x 28.58 mm outer dia pipe

each

459.95

18.91.6

For 42.70 mm x 34.00 mm outer dia pipe

each

810.75

Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of required
dia as per dirction of Engineer-in-charge.
Equal Tee
18.92.1

For 15.88 mm outer dia

each

184.70

18.92.2

pipe For 22.22 mm outer

each

268.30

18.92.3

dia pipe For 28.58 mm

each

343.80

18.92.4

outer dia pipe Details of

each

716.65

18.92.5

Cost for one no. For 42.70

each

18.92.6

mm outer dia pipe

1,003.55

For 48.60 mm outer dia

pipe

each

1,194.00

328

SUB HEAD : 18 - WATER SUPPLY

Code
No.

18.93

Description

Unit

Rate `

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of required
dia as per dirction of Engineer-in-charge.
Reducing Tee

18.94

18.93.1

For 22.22 mm x 15.88 mm outer dia pipe

each

261.35

18.93.2

For 28.58 mm x 15.88 mm outer dia pipe

each

325.20

18.93.3

For 28.58 mm x 22.22 mm outer dia pipe

each

338.00

18.93.4

For 34.00 mm x 15.88 mm outer dia pipe

each

636.50

18.93.5

For 34.00 mm x 22.22 mm outer dia pipe

each

648.10

18.93.6

For 34.00 mm x 28.58 mm outer dia pipe

each

655.10

18.93.7

For 42.70 mm x 15.88 mm outer dia pipe

each

951.25

18.93.8

For 42.70 mm x 22.22 mm outer dia pipe

each

953.60

18.93.9

For 42.70 mm x 28.58 mm outer dia pipe

each

954.75

18.93.10 For 42.70 mm x 34.00 mm outer dia pipe

each

964.05

18.93.11 For 48.60 mm x 15.88 mm outer dia pipe

each

1,038.40

18.93.12 For 48.60 mm x 22.22 mm outer dia pipe

each

1,060.45

18.93.13 For 48.60 mm x 28.58 mm outer dia pipe

each

1,068.60

18.93.14 For 48.60 mm x 34.00 mm outer dia pipe

each

18.93.15 For 48.60 mm x 42.70 mm outer dia pipe

1,112.70
each

1,153.35

Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile or
M-profile and with O-ring sealing gasket of EPDM material of required
dia as per dirction of Engineer-in-charge.
Male Thread Tee
18.94.1

For 15.88 mm outer dia x 15 mm nominal dia threaded

each

332.20

18.94.2

For 22.22 mm outer dia x 15 mm nominal dia threaded

each

399.55

18.94.3

For 22.22 mm outer dia x 20 mm nominal dia threaded

each

427.45

18.94.4

For 28.58 mm outer dia x 15 mm nominal dia threaded

each

480.85

18.94.5

For 28.58 mm outer dia x 20 mm nominal dia threaded

each

18.94.6

For 28.58 mm outer dia x 25 mm nominal dia threaded

501.75

each

18.94.7

For 34.00 mm outer dia x 15 mm nominal dia threaded

561.00

each

18.94.8

For 34.00 mm outer dia x 20 mm nominal dia threaded

699.20

each

18.94.9

For 34.00 mm outer dia x 25 mm nominal dia threaded

756.15

each

18.94.10 For 34.00 mm outer dia x 32 mm nominal dia threaded

902.50

each

18.94.11

For 42.70 mm outer dia x 15 mm nominal dia threaded

1,139.45

each

18.94.12 For 42.70 mm outer dia x 20 mm nominal dia threaded

1,067.40

each

18.94.13 For 42.70 mm outer dia x 25 mm nominal dia threaded

1,092.95

each

18.94.14 For 42.70 mm outer dia x 32 mm nominal dia threaded

1,189.40

each

18.94.15 For 42.70 mm outer dia x 40 mm nominal dia threaded

1,320.65

each

18.94.16 For 48.60 mm outer dia x 15 mm nominal dia threaded

1,604.05

each

1,161.50

SUB HEAD : 18 - WATER SUPPLY

329

Code No.

Description

Unit

18.94.17 For 48.60 mm outer dia x 20 mm nominal dia

each

Rate `

18.94.18 threaded For 48.60 mm outer dia x 25 mm nominal

18.94.19 dia threaded For 48.60 mm outer dia x 32 mm

1,196.35

each

1,247.45

each

1,498.35

each

18.94.20 nominal dia threaded For 48.60 mm outer dia x 40

18.94.21 mm nominal dia threaded
For 48.60 mm outer dia x 50 mm nominal dia
threaded

1,662.10
18.95

each

2,031.45

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Female Thread Tee
18.95.1

For 15.88 mm outer dia x15 mm nominal dia threaded

each

339.15

18.95.2

For 22.22 mm outer dia x 15 mm nominal dia threaded

each

399.55

18.95.3

For 22.22 mm outer dia x 20 mm nominal dia threaded

each

413.50

18.95.4

For 28.58 mm outer dia x 15 mm nominal dia threaded

each

516.85

18.95.5

For 28.58 mm outer dia x 20 mm nominal dia threaded

each

528.50

18.95.6

For 28.58 mm outer dia x 25 mm nominal dia threaded

each

578.45

18.95.7

For 34.00 mm outer dia x 15 mm nominal dia threaded

each

775.90

18.95.8

For 34.00 mm outer dia x 20 mm nominal dia threaded

each

788.65

18.95.9

For 34.00 mm outer dia x 25 mm nominal dia threaded

each

889.70

18.95.10 For 34.00 mm outer dia x 32 mm nominal dia threaded

each

1,056.95

18.95.11 For 42.70 mm outer dia x 15 mm nominal dia threaded

each

1,038.40

18.95.12 For 42.70 mm outer dia x 20 mm nominal dia threaded

each

1,056.95

18.95.13 For 42.70 mm outer dia x 25 mm nominal dia threaded

each

1,187.05

18.95.14 For 42.70 mm outer dia x 32 mm nominal dia threaded

each

1,239.30

18.95.15 For 42.70 mm outer dia x 40 mm nominal dia threaded

each

1,349.65

18.95.16 For 48.60 mm outer dia x 15 mm nominal dia threaded

each

1,237.00

18.95.17

For 48.60 mm outer dia x 20 mm nominal dia threaded

each

18.95.18

For 48.60 mm outer dia x 25 mm nominal dia threaded

1,249.75

each

18.95.19

For 48.60 mm outer dia x 32 mm nominal dia threaded

1,295.05

each

18.95.20

For 48.60 mm outer dia x 40 mm nominal dia threaded

1,375.20

each

18.95.21 For 48.60 mm outer dia x 50 mm nominal dia threaded

1,432.15
each

18.96

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Female Thread Connector/ Adapter

1,586.60

18.96.1

For 15.88 mm outer dia x 15 mm nominal dia threaded

each

18.96.2

For 22.22 mm outer dia x 15 mmnominal dia threaded

each

18.96.3

For 22.22 mm outer dia x 20 mm nominal dia threaded

267.15

each

18.96.4

For 28.58 mm outer dia x 15 mm nominal dia threaded

275.30

each

18.96.5

For 28.58 mm outer dia x 20 mm nominal dia threaded

321.75
each

330

220.70

332.20

SUB HEAD : 18 - WATER SUPPLY

Code No.

Description

Unit

Rate `

18.96.6

For 28.58 mm outer dia x 25 mm nominal dia

each

391.45

18.96.7

threaded For 34.00 mm outer dia x 25 mm nominal

each

475.05

18.96.8

dia threaded For 34.00 mm outer dia x 32 mm

each

624.90

18.96.9

nominal dia threaded For 42.70 mm outer dia x 32

each

669.00

18.96.10 mm nominal dia threaded For 42.70 mm outer dia x

each

791.00

18.96.11

each

973.35

each

1,120.85

40 mm nominal dia threaded For 48.60 mm outer dia

18.96.12 x 40 mm nominal dia threaded

For 48.60 mm outer dia x 50 mm nominal dia
threaded
18.97

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Male Thread Connector/ Adapter

18.98

18.97.1

For 15.88 mm outer dia x 15 mm nominal dia threaded

each

224.15

18.97.2

For 22.22 mm outer dia x 15 mm nominal dia threaded

each

263.65

18.97.3

For 22.22 mm outer dia x 20 mm nominal dia threaded

each

288.05

18.97.4

For 28.58 mm outer dia x 20 mm nominal dia threaded

each

363.55

18.97.5

For 28.58 mm outer dia x 25 mm nominal dia threaded

each

371.70

18.97.6

For 34.00 mm outer dia x 25 mm nominal dia threaded

each

535.45

18.97.7

For 34.00 mm outer dia x 32 mm nominal dia threaded

each

656.25

18.97.8

For 42.70 mm outer dia x 32 mm nominal dia threaded

each

753.80

18.97.9

For 42.70 mm outer dia x 40 mm nominal dia threaded

each

843.25

18.97.10 For 48.60 mm outer dia x 40 mm nominal dia threaded

each

975.65

18.97.11 For 48.60 mm outer dia x 50 mm nominal dia threaded

each

1,321.80

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Valve Connector
18.98.1

For 15.88 mm outer dia x 15 mm nominal dia threaded

each

271.80

18.98.2

For 22.22 mm outer dia x 15 mm nominal dia threaded

each

320.55

18.98.3

For 22.22 mm outer dia x 20 mm nominal dia threaded

each

342.65

18.98.4

For 28.58 mm outer dia x 25 mm nominal dia threaded

each

492.50

18.98.5

For 34.00 mm outer dia x 32 mm nominal dia threaded

each

730.60

18.98.6

For 42.70 mm outer dia x 40 mm nominal dia threaded

each

18.98.7

For 48.60 mm outer dia x 50 mm nominal dia threaded

1,016.30
each

18.99

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Female Threaded Elbow 90O

1,365.90

18.99.1

For 15.88 mm outer dia x 15 mm nominal dia threaded

SUB HEAD : 18 - WATER SUPPLY

each

238.10

331

Code No.

18.100

Description

Unit

Rate `

18.99.2

For 22.22 mm outer dia x 15 mm nominal dia

each

319.40

18.99.3

threaded For 22.22 mm outer dia x 20 mm nominal

each

329.85

18.99.4

dia threaded For 25.58 mm outer dia x 25 mm

each

489.00

18.99.5

nominal dia threaded For 34.00 mm outer dia x 32

each

851.40

18.99.6

mm nominal dia threaded For 42.70 mm outer dia x

each

18.99.7

32 mm nominal dia threaded For 42.70 mm outer dia

1,068.60

each

18.99.8

x 40 mm nominal dia threaded For 48.60 mm outer

1,155.70

each

18.99.9

dia x 40 mm nominal dia threaded

1,281.15

For 48.60 mm outer dia x 50 mm nominal dia

threaded

each

1,493.70

18.100.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

each

250.90

18.100.2 For 22.22 mm outer dia x 15 mm nominal dia threaded

each

317.10

18.100.3 For 22.22 mm outer dia x 20 mm nominal dia threaded

each

334.50

18.100.4 For 28.58 mm outer dia x 25 mm nominal dia threaded

each

437.90

18.100.5 For 34.00 mm outer dia x 25 mm nominal dia threaded

each

702.70

18.100.6 For 34.00 mm outer dia x 32 mm nominal dia threaded

each

854.85

18.100.7 For 42.70 mm outer dia x 32 mm nominal dia threaded

each

1,084.85

18.100.8 For 42.70 mm outer dia x 40 mm nominal dia threaded

each

1,231.20

18.100.9 For 48.60 mm outer dia x 40 mm nominal dia threaded

each

1,382.20

18.100.10 For 48.60 mm outer dia x 50 mm nominal dia threaded

each

1,683.00

18.101.1 For 15.88 mm outer dia pipe

each

52.25

18.101.2 For 22.22 mm outer dia pipe

each

74.35

18.101.3 For 28.58 mm outer dia pipe

each

97.55

18.101.4 For 34.00 mm outer dia pipe

each

200.95

18.101.5 For 42.70 mm outer dia pipe

each

293.85

18.101.6 For 48.60 mm outer dia pipe

each

383.30

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Male Threaded Elbow 90O

18.101

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Cap

18.102

Providing and fixing required Stainless Steel Fitting of press fit design of
grade AISI 304 conforming to JWWA G116 standard with V-profile or Mprofile and with O-ring sealing gasket of EPDM material of required dia
as per dirction of Engineer-in-charge.
Pipe Bridge
18.102.1
18.102.2

18.102.3

For 15.88 mm outer dia

pipe For 22.22 mm outer

dia pipe
For 28.58 mm outer
dia pipe

332

each

248.55

each

314.75

each

472.75

SUB HEAD : 18 - WATER SUPPLY

SUB-HEAD : 19.0

DRAINAGE

333

334

BASIC RATES (SH: 19.0 DRAINAGE)

Code
No.

0101
0103
0114
0115
0123
0124
0285
0287
0362
0367
0983
1003
1006
1336
1337
1352
1353
1354
1355
1356
1357
1364
1366
1367

Unit

Rate `

day

363.00

day

399.00

day

329.00

day

329.00

day

435.00

day

399.00

cum

600.00

cum

600.00

cum

500.00

tonne

6300.00

cum

700.00

quintal

4400.00

quintal

4500.00

Description

Bhisti
Blacksmith 2nd class
Beldar
Coolie
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Brick Aggregate (Single size) : 63 mm nominal size
Brick Aggregate (Single size) : 40 mm nominal size
Brick bats
Portland Cement
Fine sand (zone IV)
Mild steel round bar above 12 mm dia
Mild steel square bars
Clearing eye with chain and lid 100 mm dia
Clearing eye with chain and lid 150 mm dia
C.I. cover and frame 300x300 mm inside
C.I.cover without frame 300x300 mm inside i/c cover of 4.50 kg
Rectangular cover 455x610 mm with frame (low duty)
Rectangular cover 455x610 mm without frame (low duty)
500 mm dia cover with frame (medium duty)
500 mm dia cover without frame (medium duty)
C.I. grating 100x100 mm
C.I. grating 150x150 mm

each

44.00

each

50.00

each

300.00

each

225.00

each

1500.00

each

1000.00

each

4750.00

each

2300.00

each

15.00

each

25.00

each

30.00

C.I. grating 180x180 mm

1617

S.C. I. soil, waste and vent single socketed pipe 1.80 metres
long: 100 mm dia

each

1150.00

1618

S.C.I. soil, waste and vent single socketed pipe1.80 metres long:
150 mm dia

each

1750.00

each

350.00

each

600.00

each

450.00

metre

200.00

metre

210.00

1621
1622
1628
1700
1701

S.C.I. plain bend 100 mm dia

S.C.I. plain bend 150 mm dia
S.C.I. plain single equal junctions 100x100x100 mm dia
R.C.C. pipes NP2 class 100 mm dia
R.C.C. pipes NP2 class 150 mm dia

SUB HEAD : 19 - DRAINAGE

335

Code
No.

1702
1703
1704
1705
1706
1707
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738

Description

Unit

Rate `

R.C.C. pipes NP2 class 250 mm dia

metre

260.00

R.C.C. pipes NP2 class 300 mm dia

metre

300.00

R.C.C. pipes NP2 class 450 mm dia

metre

400.00

R.C.C. pipes NP2 class 500 mm dia

metre

580.00

R.C.C. pipes NP2 class 600 mm dia

metre

920.00

R.C.C. pipes NP2 class 700 mm dia

metre

1050.00

R.C.C. pipes NP2 class 800 mm dia

metre

1170.00

R.C.C. pipes NP2 class 900 mm dia

metre

1280.00

R.C.C. pipes NP2 class 1000 mm dia

metre

1590.00

R.C.C. pipes NP2 class 1100 mm dia

metre

1875.00

R.C.C. pipes NP2 class 1200 mm dia

metre

1925.00

R.C.C. collars NP2 class 100 mm dia

each

30.00

R.C.C. collars NP2 class 150 mm dia

each

35.00

R.C.C. collars NP2 class 250 mm dia

each

50.00

R.C.C. collars NP2 class 300 mm dia

each

55.00

R.C.C. collars NP2 class 450 mm dia

each

100.00

R.C.C. collars NP2 class 500 mm dia

each

115.00

R.C.C. collars NP2 class 600 mm dia

each

140.00

R.C.C. collars NP2 class 700 mm dia

each

150.00

R.C.C. collars NP2 class 800 mm dia

each

200.00

R.C.C. collars NP2 class 900 mm dia

each

235.00

R.C.C. collars NP2 class 1000 mm dia

each

280.00

R.C.C. collars NP2 class 1100 mm dia

each

300.00

R.C.C. collars NP2 class 1200 mm dia

each

350.00

RCC pipe 450 mm dia NP-3 spigot

metre

1496.00

RCC pipe 600 mm dia NP-3 spigot

metre

1995.00

RCC pipe 900 mm dia NP-3 spigot

metre

3150.00

RCC pipe 1000 mm dia NP-3 spigot

metre

3885.00

RCC pipe 1200 mm dia NP-3 spigot

metre

5040.00

RCC pipe 1800 mm dia NP-3 spigot

metre

9450.00

RCC pipe 450 mm dia NP-4 spigot

metre

1733.00

RCC pipe 600 mm dia NP-4 spigot

metre

2310.00

RCC pipe 900 mm dia NP-4 spigot

metre

4595.00

RCC pipe 1000 mm dia NP-4 spigot

metre

5565.00

RCC pipe 1200 mm dia NP-4 spigot

metre

6510.00

336

SUB HEAD : 19 - DRAINAGE

Code
No.

1739
1854
1855
1856
1858
1859
1881
1900
1902
1904
2201
2209
2224
2225
2226
2228
2229
2260
2261
2272

Description

Unit

Rate `

RCC pipe 1800 mm dia NP-4 spigot

metre

13650.00

Stoneware pipes grade A (60 cm long) 100 mm dia

each

50.00

Stoneware pipes grade A (60 cm long) 150 mm dia

each

80.00

Stoneware pipes grade A (60 cm long) 200 mm dia

each

135.00

Stoneware pipes grade A (60 cm long) 250 mm dia

each

220.00

Stoneware pipes grade A (60 cm long) 300 mm dia

each

240.00

kilogram

50.00

S.W. gully trap P type 100x100 mm

each

90.00

S.W. gully trap P type 150x100 mm

each

130.00

S.W. gully trap P type 180x150 mm

each

225.00

1000 Nos

283.96

tonne

94.65

Carriage of S.W. pipes 100 mm dia

100 metre

141.98

Carriage of S.W. pipes 150 mm dia

100 metre

283.96

Carriage of S.W. pipes 200 mm dia

100 metre

473.27

Carriage of S.W. pipes 250 mm dia

100 metre

811.33

Carriage of S.W. pipes 300 mm dia

100 metre

1014.16

Spun yarn

Carriage of bricks
Carriage of cement

Carriage of brick aggregate

cum

115.75

Carriage of fine sand (1 part badarpur sand: 2 parts

jamuna sand)

cum

106.49

Carriage of Stainless Steel pipes below 100 mm dia

tonne

94.65

2275

Carriage of R.C.C. pipes 100 mm dia

100 metre

232.76

2281

Carriage of R.C.C. pipes 150 mm dia

100 metre

387.93

2287

Carriage of R.C.C. pipes 250 mm dia

100 metre

896.73

2290

Carriage of R.C.C. pipes 300 mm dia

100 metre

1108.37

2299

Carriage of R.C.C. pipes 450 & 500 mm dia

100 metre

2586.19

2303

Carriage of R.C.C. pipes 600,700,750 & 800 mm dia

100 metre

3879.29

2331

Carriage of R.C.C. pipes 900 mm dia

100 metre

5818.93

2332

Carriage of R.C.C. pipes 1000 mm dia

100 metre

7758.57

2333

Carriage of R. C. C. pipes 1100 mm dia

100 metre 7758.57

2334

Carriage of R.C.C. pipes 1200 mm dia

100 metre

7758.57

2336

Carriage of R.C.C. pipe above 1200 mm dia and upto 1800 mm dia

100 metre

7758.57

2602
7.5

Common burnt clay F.P.S. (non modular) bricks class designation

1000 Nos

4500.00

each

9000.00

3860

560 mm dia cover with frame (Heavy duty)

each

5000.00

3861

560 mm dia cover without frame (Heavy duty)

SUB HEAD : 19 - DRAINAGE

337

Code
No.

Description

Unit

Rate `

S.C.I. Tee 150 mm

each

600.00

S.W. intercepting trap 100 mm dia

each

190.00

S.W. intercepting trap 150 mm dia

each

250.00

7130

Rectangular shape 600x450 mm precast R.C.C. manhole

cover with frame - L.D. - 25

each

750.00

7131

Square shape 450x450 mm precast R.C.C. manhole cover with

frame - L.D. - 25

each

650.00

7132

Circular shape 450 mm dia precast R.C.C. manhole cover with

frame - L.D. - 25

each

600.00

7133

Rectangular shape 500x500 mm precast R.C.C. manhole cover

with frame - M.D. - 10

each

700.00

7134

Circular shape 500 mm dia precast R.C.C. manhole cover with

frame -M.D.-10

each

600.00

7135

Circular shape 560 mm dia precast R.C.C. manhole cover with

frame - H.D. - 20

each

1100.00

7136

Circular shape 560 mm dia precast R.C.C. manhole cover with

frame - E.H.D. - 35

each

1225.00

Plastic encapsulated M.S. foot rest 30x20x15 cm

each

115.00

Precast R.C.C. grating with frame 500x450 mm horizontal grating

each

650.00

Precast R.C.C. grating with frame 450x100 mm vertical grating

each

325.00

SS pipe 304 grades with press fit technology as per JIS 3448
standard 48.60 mm outer dia

metre

680.00

7087
7128
7129

7354
7380
7381
8701

Sundries
9999

L.S.

1.78

338

SUB HEAD : 19 - DRAINAGE

19.0 DRAINAGE
Code No.

Description

Unit

Rate `

NOTE : - The rates given for all the items under sub-head Drainage
are applicable to work executed in soils above sub- soil water level.
Extra allowance has to be made for work under sub- soil water level.
STONE WARE PIPES AND FITTINGS
19.1

19.2

19.3

19.4

Providing, laying and jointing glazed stoneware pipes class SP-1 with
stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine
sand) including testing of joints etc. complete :
19.1.1

100 mm diameter

metre

206.55

19.1.2

150 mm diameter

metre

314.35

19.1.3

200 mm diameter

metre

462.15

19.1.4

250 mm diameter

metre

696.50

19.1.5

300 mm diameter

metre

770.40

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand

: 10 graded stone aggregate 40 mm nominal size) all-round S.W.
pipes including bed concrete as per standard design :
19.2.1

100 mm diameter S.W. pipe

metre

592.60

19.2.2

150 mm diameter S.W. pipe

metre

724.70

19.2.3

200 mm diameter S.W. pipe

metre

844.85

19.2.4

250 mm diameter S.W. pipe

metre

977.00

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand

: 10 graded stone aggregate 40 mm nominal size) up to haunches of
S.W. pipes including bed concrete as per standard design :
19.3.1

100 mm diameter S.W. pipe

metre

281.65

19.3.2

150 mm diameter S.W. pipe

metre

456.45

19.3.3

200 mm diameter S.W. pipe

metre

536.55

19.3.4

250 mm diameter S.W. pipe

metre

624.60

19.3.5

300 mm diameter S.W. pipe

metre

720.70

Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight C.I.
cover with frame o f 300 x300 mm size (inside) the weight of cover to
be not less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design:
19.4.1

100x100 mm size P type

19.4.1.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

each

19.4.1.2

With Sewer bricks conforming to IS : 4885

each

19.4.2

150 x 100 mm size P type

1571.25
1641.70

SUB HEAD : 19 - DRAINAGE

339

Code No.

Description

Unit

Rate `

19.4.2.1

With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5

each

1594.35

each

1664.80

19.4.2.2
19.4.3

With sewer bricks conforming to IS : 4885

180x150 mm size P type

19.4.3.1

With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5

each

1678.85

each

1749.30

19.4.3.2 With Sewer bricks conforming to IS : 4885

19.5

19.6

Dismantling of old S.W. pipes including breaking of joints and bed

concrete stacking of useful materials near the site within 50 m lead and
disposal of unserviceable materials into municipal dumps :
19.5.1

100 mm diameter

metre

32.50

19.5.2

150 mm diameter

metre

35.90

19.5.3

200 mm diameter

metre

38.20

19.5.4

250 mm diameter

metre

40.50

19.5.5

300 mm diameter

metre

42.80

19.5.6

350 mm diameter

metre

49.30

19.5.7

400 mm diameter

metre

53.90

19.5.8

450 mm diameter

metre

56.15

Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.
complete :
19.6.1

100 mm dia. R.C.C. pipe

metre

318.50

19.6.2

150 mm dia. R.C.C. pipe

metre

348.30

19.6.3

250 mm dia. R.C.C. pipe

metre

468.60

19.6.4

300 mm dia. R.C.C. pipe

metre

506.35

19.6.5

450 mm dia. R.C.C. pipe

metre

705.90

19.6.6

500 mm dia. R.C.C. pipe

metre

934.10

19.6.7

600 mm dia. R.C.C. pipe

metre

19.6.8

700 mm dia. R.C.C. pipe

1379.45

metre

19.6.9

800 mm dia. R.C.C. pipe

1562.70

metre

19.6.10

900 mm dia. R.C.C. pipe

1748.75

metre

19.6.11

1000 mm dia. R.C.C. pipe

1962.85

metre

19.6.12

1100 mm dia. R.C.C. pipe

2433.05

metre

19.6.13

1200 mm dia. R.C.C. pipe

2868.75
metre

19.7

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :

4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

3061.30

floating coat of neat cement and making channels in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4

340

SUB HEAD : 19 - DRAINAGE

Code No.

Description

Unit

Rate `

graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :
19.7.1

Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions, total
weight of cover and frame to be not less than 38 kg (weight
of cover 23 kg and weight of frame 15 kg) :

19.7.1.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

each

19.7.1.2

With Sewer bricks conforming to IS : 4885

each

19.7.2

Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight
of cover 58 kg and weight of frame 58 kg) :

19.7.2.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

each

19.7.2.2

With Sewer bricks conforming to IS : 4885

each

19.7.3

Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (heavy duty) 560 mm internal diameter, total
weight of cover and frame to be not less than 208 kg (weight
of cover 108 kg and weight of frame 100 kg) :

19.7.3.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

each

With Sewer bricks conforming to IS : 4885

each

19.7.3.2
19.8

8691.25

18304.45
18808.40

22876.75
23310.25

Extra for depth for manholes :

19.8.1

Size 90x80 cm

19.8.1.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

metre

19.8.1.2

With Sewer bricks conforming to IS : 4885

metre

19.8.2

Size 120x90 cm

19.8.2.1

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

metre

With Sewer bricks conforming to IS : 4885

metre

19.8.2.2
19.9

8507.00

Constructing brick masonry circular type manhole 0.91 m internal dia at

bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse
sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with a floating coat of neat cement,
foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size), and making necessary channel
in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a floating coat of neat
cement, all complete as per standard design :

5638.20
6174.65

6753.65
7393.00

SUB HEAD : 19 - DRAINAGE

341

Code No.

Description

19.9.1

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD20 grade designation) 560 mm internal diameter conforming
to I.S. 12592, total weight of cover and frame to be not less
than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal
size)
including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :

19.9.1.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

each

With Sewer bricks conforming to IS : 4885

each

19.9.1.2
19.10

19.10.2

8738.55
9025.15

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

metre

4842.40

With Sewer bricks conforming IS : 4885

metre

5291.55

Constructing brick masonry circular manhole 1.22 m internal dia at

bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4
coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3
(1 cement : 3 coarse sand) finished with a floating coat of neat
cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size) and making necessary channel
in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a floating coat of neat
cement, all complete as per standard design :
19.11.1

19.12

Rate `

Extra depth for circular type manhole 0.91m internal dia (at bottom)
beyond 0.91 m to 1.67 m
19.10.1

19.11

Unit

1.68 m deep with SFRC Cover and frame (heavy duty HD-20
grade designation) 560 mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less
than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal
size) including centering, shuttering all complete.
(Excavation, foot rests and 12 mm thick cement plaster at
the external surface shall be paid for separately) :

19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5

each

19.11.1.2 With Sewer bricks conforming IS : 4885

each

16467.90
17166.25

Extra depth for circular type manhole 1.22 m internal dia (at bottom)
beyond 1.68 m to 2.29 m :
19.12.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5
metre

19.12.2

With Sewer bricks conforming IS : 4885

metre

6270.70
6856.95

19.13
Constructing brick masonry circular manhole 1.52 m internal dia at
bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand)

342

SUB HEAD : 19 - DRAINAGE

Code No.

Description

Unit

Rate `

inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with a floating coat of neat cement, foundation
concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40
mm nominal size) and making necessary channel in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement, all
complete as per standard design :
19.13.1

19.14

19.15

19.16

19.17

2.30 m deep with SFRC Cover and frame (heavy duty HD- 20
grade designation) 560 mm internal diameter conforming to
I.S. 12592, total weight of cover and frame to be not less than
182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete. (Excavation, foot
rests and 12 mm thick cement plaster at the external
surface shall be paid for separately) :

19.13.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5

34976.25
each

19.13.1.2 With Sewer bricks conforming IS : 4885

each

36969.05

Extra depth for circular type manhole 1.52 m internal dia (at bottom)
beyond 2.30 m :
19.14.1

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

19.14.2

With Sewer bricks conforming IS : 4885

metre

14842.95

metre

16358.95

Providing M.S. foot rests including fixing in manholes with 20x20x10

cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) as per standard design :
19.15.1

With 20x20 mm square bar

each

275.50

19.15.2

With 20 mm diameter round bar

each

242.05

each

311.60

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar
conforming to IS: 1786, having minimum cross section as 23 mmx25
mm and over all minimum length 263 mm and width as 165 mm with
minimum 112 mm space between protruded legs having 2 mm tread on
top surface by ribbing or chequering besides necessary and adequate
anchoring projections on tail length on 138 mm as per standard drawing
and suitable to with stand the bend test and chemical resistance test as
per specifications and having manufactures permanent identification
mark to be visible even after fixing, including fixing in manholes with
30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 20 mm nominal
size) complete as per design.
Replacement of M.S. foot rests in manholes including dismantling
concrete blocks and fixing with 20x20x10 cm cement concrete blocks
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size):
19.17.1

19.17.2

With 20x20 mm square

bar

diameter round bar

With 20 mm
SUB HEAD : 19 - DRAINAGE

each

323.70

each

290.25

343

Code
No.

19.18

Description

19.18.2
19.18.3

455 x 610 mm rectangular C.I. cover (light duty) the weight

of the cover to be not less than 23 kg

each

00 mm diameter C.I. cover (medium duty) the weight of the

cover to be not less than 58 kg

each

560 mm diameter C.I. cover (heavy duty) the weight of the

cover to be not less than 108 kg

each

5886.70

1131.70
each

19.19.1.2 Square shape 450 mm internal dimensions

each

19.19.1.3 Circular shape 450 mm internal diameter

each

960.90
902.80

M D - 10

19.19.2.1 Square shape 450 mm internal dimension

each

1080.10

19.19.2.2 Circular shape 500 mm internal diameter

each

909.25

each

1511.55

19.19.4.1 Circular shape 560 mm internal dia

each

1656.70

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap
(standard pattern) the weight of cover to be not less than 4.5 kg

each

278.40

H D - 20

19.19.3.1 Circular shape 560 mm internal diameter

19.19.4

19.22

2745.15

19.19.1.1 Rectangular shape 600x450 mm internal dimensions

19.19.3

19.21

1222.15

Providing and fixing in position pre-cast R.C.C. manhole cover and

frame of required shape and approved quality 19.19.1 L D- 2.5

19.19.2

19.20

Rate `

Supplying and fixing C.I. cover without frame for manholes :

19.18.1

19.19

Unit

EHD - 35

Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cement plastered on both sides with
cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating
coat of neat cement and making necessary channels for the drain etc.
complete :
19.21.1

For pipes 100 to 250 mm diameter

each

364.60

19.21.2

For pipes 250 to 300 mm diameter

each

436.20

19.21.3

For pipes 350 to 450 mm diameter

each

636.40

Providing sand cast iron drop connection externally for 60 cm drop

from branch sewer line to main sewer manhole including inspection and
cleaning eye with chain and lid, sand cast iron drop pipe and bend
encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand
: 10 graded stone aggregate 40 mm nominal size) with all centering
and shuttering required, cutting holes in walls and making good with
brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered
with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the
manhole wall, lead caulked joints between sand cast iron pipes and

fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between
sand cast iron tee and S.W. pipe, making required channels complete
as per standard design and specifications :

344

SUB HEAD : 19 - DRAINAGE

Code No.

Description

Unit

Rate `

19.22.1

each

6203.05

each

8544.30

metre

1903.05

metre

2508.70

19.22.2

100 mm dia sand cast iron drop

connection
150 mm dia sand cast iron drop
connection

19.23

Extra for depths beyond 60 cm of sand cast iron drop connection complete:
19.23.1
19.23.2

For 100 mm dia sand cast iron drop

connection
For 150 mm dia sand cast iron drop
connection

19.24

19.25

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,
including stacking of useful materials near the site and disposal of
unserviceable materials into municipal dumps within 50 m lead :
19.24.1

Rectangular manhole 90x80 cm and 45 cm deep

each

937.25

19.24.2

Rectangular manhole 120x90 cm and 90 cm deep

each

1645.75

19.24.3

Rectangular arch type manhole 140x90 cm and 2.45 m deep

each

3113.50

19.24.4

Circular manhole 122 cm diameter and 1.68 m deep

each

2385.15

Extra for depth of manholes dismantled :

19.25.1

Rectangular manhole 90x80 cm and beyond 45 cm depth

metre

750.30

19.25.2

Rectangular manhole 120x90 cm and beyond 90 cm depth

metre

893.60

19.25.3

Rectangular arch type manhole 140x90 cm and beyond

2.45 m depth (up to 4.25 m depth)

metre

723.40

Circular manhole 122 cm diameter and beyond 1.68 m depth

(up to 2.29 m depth)

metre

816.00

19.25.4
19.26

Raising manhole cover and frame slab to required level including

dismantling existing slab and making good the damage as required
(Raising depth of manhole to be paid separately) :
19.26.1
19.26.2
19.26.3
19.26.4

19.27

each

1597.15

Rectangular manhole 120x90 cm with circular cover 500 mm

dia of grade MD - 10

each

Rectangular manhole 120x90 cm with circular cover 560 mm

dia of grade HD - 20

each

Circular manhole 140 cm dia with circular cover 600 mm dia

of grade EHD - 35

each

2503.55
2329.40
213.65

Constructing brick masonry road gully chamber 50x45x60 cm with

bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame complete as
per standard design :
19.27.1

19.28

Rectangular manhole 90x80 cm with rectangular cover 600

450 mm of grade LD - 2.5

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Constructing brick masonry road gully chamber 45x45x77.5 cm with

each

3957.50

bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast

R.C.C. vertical grating complete as per standard design :

SUB HEAD : 19 - DRAINAGE

345

Code No.

Description

19.28.1
19.29

each

4408.95

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

each

7501.45

each

4692.05

each

5375.20

each

6238.20

metre

3924.65

metre

4280.80

metre

4984.10

each

18309.50

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with
1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10
graded stone aggregate 40 mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished
smooth with a floating coat of neat cement on walls and bed concrete
etc. complete as per standard design:
19.30.1

Inside dimensions 455x610 mm and 45 cm deep for

single pipe line :

19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.30.2

Inside dimensions 500x700 mm and 45 cm deep for pipe

line with one or two inlets :

19.30.2.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.30.3

Inside dimensions 600x 850 mm and 45 cm deep for pipe line

with three or more inlets :

19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.31

Rate `

Constructing brick masonry road gully chamber 110x50x77.5 cm

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame and
vertical grating complete as per standard design :
19.29.1

19.30

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Unit

Extra for depth beyond 45 cm of brick masonry chamber

: 19.31.1 For 455x610 mm size
19.31.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.31.2

For 500x700 mm size

19.31.2.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.31.3

For 600x850 mm size

19.31.3.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
19.32

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design.
19.32.1

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

346

SUB HEAD : 19 - DRAINAGE

Code
No.

19.33

19.34

19.35

Description

Unit

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including

S.W. drain pipe 100 mm diameter and 1.20 m long complete as per
standard
design.

each

2082.45

Providing and fixing S.W. intercepting trap in manholes with stiff mixture
of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints
etc. complete :
19.34.1

100 mm dia

each

289.40

19.34.2

150 mm dia

each

392.85

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.
pipes including collars/spigot jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine sand) including testing of
joints etc. complete
19.35.1

450 mm dia RCC pipes.

metre

1920.50

19.35.2

600 mm dia RCC pipes.

metre

2504.60

19.35.3

900 mm dia RCC pipes.

metre

3944.25

19.35.4

1000 mm dia RCC pipes. (Laying by mannual/ machenical

means)

metre

4879.20

1200 mm dia RCC pipes. (Laying by mannual/

machenical means)

metre

6410.20

1800 mm dia RCC pipes. (Laying by mannual/ machenical

means)

metre

11758.15

19.35.5
19.35.6
19.36

Rate `

Providing and laying Non Pressure NP-4 class (Heavy duty)

R.C.C. pipes including collars/spigot jointed with stiff mixture of
cement mortar in the proportion of 1:2 (1 cement : 2 fine sand)
including testing of joints etc. complete
19.36.1

450 mm dia RCC pipes.

metre

2195.75

19.36.2

600 mm dia RCC pipes.

metre

2870.45

19.36.3

900 mm dia RCC pipes.

metre

5622.60

19.36.4

1000 mm dia RCC pipes.(Laying by mannual/ machenical

means)

metre

6830.55

1200 mm dia RCC pipes. (Laying by mannual/ machenical

means)

metre

8117.60

1800 mm dia RCC pipes. (Laying by mannual/ machenical

means)

metre

16583.20

19.36.5
19.36.6

SUB HEAD : 19 - DRAINAGE

347

348

SUB-HEAD : 20.0

PILE WORK

349

350

BASIC RATES (SH: 20.0 PILE WORK)

Code
No.

0015
0017
0018
0024

Hire and running charges of Tripod and Mechanical Winch

machine complete with power unit and accessories
Hire and running charges of tipper

Rate `

day
day

6000.00
1700.00

day

5000.00

day

34000.00

IV)
includin
g
prepara
tion of
pile
head
etc. for
Single
pile up
to 50
tonne
capacity

day

Hire and running charges of loader

Hire and running charges of hydraulic piling rig with power unit etc. including complete accessories and shifting at site

0025

Hire and running charges of light crane

0026

Hire and running charges of bentonite pump

0027

Hire and running charges of vibrating pile driving hammer complete

with power unit and accessories

0028

Hire and running charges of crane 20 tonne capacity

0080

Hire and running charges of drill machine up to 400 mm dia

(including cost of mobile oil, diesel consumption in ordinary soil and
operator)

0081

Pile Integrity testing equipment

0114

Beldar

0130

Mistry

0160

Technician

7181

C.I. pile shoe

7182

M.S. clamps for pile shoe

7183

Bentonite

7246

Vertical load testing (initial) of piles in accordance with IS : 2911 (PartIV) including installation of loading platform and preparation of pile
head or construction of test cap and dismantling of test cap after test
etc. complete as per specification and up to 50 tonne capacity pile

7247

Vertical load testing (initial) of piles in accordance with IS : 2911 (PartIV) including installation of loading platform and preparation of pile
head or construction of test cap and dismantling of test cap after test
etc. complete as per specification & above 50 tonne and up to 100
tonne

7248

Vertical load testing (initial) of piles in accordance with IS : 2911 (PartIV) including installation of loading platform and preparation of pile
head or construction of test cap and dismantling of test cap after test
etc. complete as per specification & group of two or more up to 50
tonne

7249

Unit

Description

Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-

day
day
day
day
day
day
day
day kilogram
kilogram
tonne

per test

per test

per test

per test

2200.00

45.0
0

4200.00

3100.0
48500.00
0

35000.00
9300.00

15000.00
33200.0
0

7500.00
3000.00
329.00
435.00
700.00 50.00
SUB HEAD : 20 - PILE WORK

40300.0
0

351

Code
No.

7250

7251

Description

Unit

Rate `

Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Single pile above 50 tonne
capacity pile and up to 100 tonne capacity pile

per test

23000.00

Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Group of two piles up to
50

per test

29500.00

Lateral load testing of single pile in accordance with IS : 2911 part -IV
for determining safe allowable lateral load on pile up to 50 tonne
capacity

per test

15000.00

per test

23600.00

Lateral load testing of single pile in accordance with IS : 2911 part -IV
for determining safe allowable lateral load on pile above 50 tonne
capacity

L.S.

tonne capacity each

7252
7253
9999

Sundries

1.78

352

SUB HEAD : 20 - PILE WORK

20.0 PILE WOPRK

Code No.

Description

20.1

Providing, driving and installing driven cast-in-situ reinforced cement

concrete piles of grade M-25 of specified diameter and length below the
pile cap, to carry safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of shoe and the length
of pile to be embedded in the pile cap etc. all complete. (Length of pile
for payment shall be measured from top of shoe to the bottom of pile
cap) :

20.2

Unit

Rate `

20.1.1

400 mm dia piles

metre

1,926.55

20.1.2

450 mm dia piles

metre

2,361.15

20.1.3

500 mm dia piles

metre

2,846.80

20.1.4

550 mm dia piles

metre

3,090.20

20.1.5

750 mm dia piles

metre

5,236.45

20.1.6

1000 mm dia piles

metre

8,637.30

20.1.7

1200 mm dia piles

metre

20.1.8

1500 mm dia piles

11,160.70
metre

15,729.05

Boring, providing and installation bored cast-in-situ reinforced cement

concrete piles of grade M-25 of specified diameter and length below the
pile cap, to carry a safe working load not less than specified, excluding
the cost of steel reinforcement but including the cost of boring with
bentonite solution and temporary casing of appropriate length for
setting out and removal of same and the length of the pile to be
embedded in the pile cap etc. by percussion drilling using Direct
mud circulation (DMC) or Bailer and chisel technique by
tripod and mechanical Winch Machine all complete, including
removal of excavated earth with all its lifts and leads (length of pile for
payment shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tubewell boring mchine shall not
be used .

20.2A

20.2.1

Deleted

20.2.2

Deleted

metre

1,665.35

20.2.3

450 mm dia piles

metre

1,953.85

20.2.4

500 mm dia. piles

metre

2,671.00

20.2.5

600 mm dia piles

metre

4,022.95

20.2.6

750 mm dia piles

Boring, providing and installation bored cast-in-situ reinforced cement

concrete piles of garde M-25 of specified diameter and length below pile
cap, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite
solution and temporary casing of appropriate length for setting out and
removal of same and the length of the pile to be embedded in the pile
cap etc. by Crawler mounted, telescopic boom hydraulic pilling
Rig all complete, including removal of excavated earth with all its lifts
and leads (length of pile for payment shall be measured up to bottom of
pile cap).

SUB HEAD : 20 - PILE WORK

353

Code No.

Description

Unit

Rate `

Note: Truck Mounted rotary/TMR/Tube well boring machine shall

not be used.

20.3

20.2A.1

600 mm dia piles

metre

3,629.25

20.2A.2

750 mm dia piles

metre

5,215.40

20.2A.3

1000 mm dia piles

metre

8,683.15

20.2A.4

1200 mm dia piles

metre

20.2A.5

1500 mm dia piles

11,334.45
metre

16,241.80

Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in M-25 cement concrete,
to carry a safe working load not less than specified, excluding the cost
of steel reinforcement but including the cost of boring with bentonite
solution and the length of the pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be measured upto to the
bottom of pile cap) :
20.3.1

300 mm dia piles

metre

2,123.15

20.3.2

400 mm dia piles

metre

2,569.05

20.3.3

450 mm dia piles

metre

2,835.95

20.3.4

550 mm dia piles

metre

3,153.35

20.4
Extra over item No. 20.3 for providing additional bulb in under reamed
piles, under specified dia meter (Only the quantity of extra bulbs are to be paid).
20.4.1

300 mm dia piles

20.4.2

400 mm dia piles

20.4.3

450 mm dia piles

20.4.4

550 mm dia piles

each
1,474.95

each

1,674.65

each

1,795.20
20.5

each

1,983.40

Providing, driving and installing driven Pre-cast reinforced cement

concrete piles of specified diameter and length below the pile cap in M25 cement concrete to carry safe working load not less than specified.
With a central through preformed hole with M.S. black pipe of dia, 40
mm for grouting with cement sand grouting of mix 1:2 (1 cement : 2
coarse sand) under sufficient positive pressure to ensure complete filling
including centring, shuttering, driving and removing the steel casing pipe
and lifting casing etc. complete but excluding the cost of steel
reinforcement. (Length of pile for payment shall be measured from top of
the shoe to the bottom of pile cap).
20.5.1

400 mm dia piles

metre

2,438.50

20.5.2

450 mm dia piles

metre

2,930.45

20.5.3

500 mm dia piles

metre

20.5.4

550 mm dia piles

3,112.30

20.5.5

750 mm dia piles

20.5.6

1000 mm dia piles

metre
3,505.15

metre

6,424.25

metre
20.6

8,719.50
Vertical load testing of piles in accordance with IS 2911 (Part IV)
including installation of loading platform by Kentledge method and
preparation of pile head or construction of test cap and dismantling of
test cap after test etc. complete as per specification & the direction of
Engineer in-charge.
Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic

354

SUB HEAD : 20 - PILE WORK

Code No.

Description

Unit

Rate `

method of testing.
Note: 2. Testing agency shall submitt the design of loading platform for
the approval of Engineer-in-charge.
20.6.1

Single pile upto 50 tonne Safe capacity

per test 38,561.80

20.6.1.1

Initial test (Test Load 2.5 times the Safe capacity)

per test 17,422.50

20.6.1.2

Routine test (Test Load 1.5 times the Safe capacity)

20.6.2

Single pile above 50 tonne and upto 100 tonne Safe

per test 46,808.45

20.6.2.1

capacity Initial test (Test Load 2.5 times the Safe capacity)

per test 26,714.50

20.6.2.2

Routine test (Test Load 1.5 times the Safe capacity)

20.6.3

Group of two or more piles upto 50 tonne Safe

per test 56,332.80

20.6.3.1

capacity Initial test (Test Load 2.5 times the Safe

per test 34,264.20

20.6.3.2

capacity)
Routine test (Test Load 1.5 times the Safe capacity)

20.7

20.8

20.9

Cyclic vertical load testing of pile in accordance with IS Code of practice

IS: 2911 (part IV) by Kentledge method including preparation of pile
head etc for.
20.7.1

Single pile

per test 17,422.50

20.7.1.1

Upto 50 tonne Safe capacity pile

per test 26,714.50

20.7.1.2

Above 50 tonne and upto 100 tonne Safe capacity

20.7.2

pile Group of two or more piles

20.7.2.1

Upto 400 tonne Safe capacity of group

per test 34,264.20

Lateral load testing of single pile in accordance with IS Code of practice

IS : 2911 (Part IV) for determining safe allowable lateral load on pile :
20.8.1

Upto 50 tonne capacity pile

per test 17,422.50

20.8.2
pile

Above 50 tonne and upto 100 tonne capacity

per test 27,411.40

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic
Echo Test method in accordance with IS 14893 including surface
preparation of pile top by removing soil, mud, dust & chipping lean
concrete lumps etc. and use of computerised equipment and high skill
trained personal for conducting the test & submission of results, all
complete as per direction
of Engineer-in-charge.
Note :- The inclusion of the above item in the schedule of work shall be
judiciously decided by the technical sanctioning authority, keeping in
view the quality control, type of soil strata & importance of the project.

per test

745.50

SUB HEAD : 20 - PILE WORK

355

356

SUB-HEAD : 21.0

ALUMINIUM WORK

357

358

BASIC RATES (SH: 21.0 ALUMINIUM WORK)

Code
No.

0100
0111
0112
0114
0116
0123
0124
0139
0589
0689
0992

Unit

Rate `

day

363.00

day

435.00

day

399.00

day

329.00

day

329.00

day

435.00

day

399.00

day

363.00

100 Nos

100.00

10 Nos

530.00

quintal

5350.00

Description

Bandhani
Carpenter 1 st class
Carpenter 2nd class
Beldar
Fitter (grade 1)
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Skilled Beldar (for floor rubbing etc.)
Chromium plated Brass screws 20 mm
Anodised Aluminium butt hinges 100x75x4 mm
Galvanised steel plain sheets

2406

Float glass sheet of nominal thickness 4 mm (weight not less than

10 kg/sqm)

sqm

345.00

2407

Float glass sheet of nominal thickness 5.5 mm (weight not less than
13.50 kg/sqm)

sqm

520.00

2408

Float glass sheet of nominal thickness 8 mm (weight not less than

20.00 kg/sqm)

sqm

740.00

kilogram

225.00

each

280.00

each

15.00

each

10.00

kilogram

200.00

2704
7001
7019
7048
7306
7313
7347
7348
7388
7389
7390
7391
7392
7393
7394
7395

Aluminium Strip 40 mm wide and 2 mm thick

Brass 100mm mortice latch and lock with 6 levers without pair of
handles
Dash fastener / Chemical fastner
Rawl plug 50 mm (designation 10 nos)
Aluminium T or L sections
Expandable fastener with plastic sleeve and M.S. screws : 32 mm long
Cadmium plated full threaded steel screws (30x4 mm dia)
Aluminium washer 2 mm thick 15 mm dia
Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt
Anodising 15 microns on aluminium sections
Neoprene/EPDM rubber gasket
Anodising 25 microns on aluminium sections
Powder coating 50 microns on aluminium sections
Polyester powder coating 50 microns on aluminium sections
Double action hydraulic floor spring with stainless steel cover plate
6 mm dia G.I. adjustable hangers including clips (up to 1.2 m length)

each

11.00

100 Nos

28.00

100 Nos

10.00

each

50.00

kilogram

40.00

metre

25.00

kilogram

50.00

kilogram

64.00

kilogram

70.00

each

1550.00

each

28.00

SUB HEAD : 21 - ALUMINIUM WORK

359

Code
No.

7396
7477

7480

Description

Unit

Rate `

Double action hydraulic floor spring with brass cover plate

each

1700.00

Prelaminated particle board with one side decorative and other side
balancing lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick

sqm

750.00

Pre/aminated particle board with both sides decorative lamination, flat

pressed 3 layer & graded (medium density) Grade I, Type II
conforming
to IS : 12823 (exterior grade) 12 mm thick

790.00
sqm

8646

Silicon sealant

8647

Stainless steel screws 30 mm x4 mm

8648

Hermetically sealed double glazed unit made with 6 mm thick clear float
glass both side having 12 mm air gap

sqm

Stainless steel (SS 304 grade) adjustable friction window stay 205 x 19
mm

each

Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19
mm

each

Stainless steel (SS 304 grade) adjustable friction window stay 355 x 19
mm

each

Stainless steel (SS 304 grade) adjustable friction window stay 510 x 19
mm

each

Stainless steel (SS 304 grade) adjustable friction window stay 710 x 19
mm

each

2.60

8654

Masking tape

metre

42.00

8660

Aluminium casement window fastener (Anodised AC 15 )

each

43.00

8661

Aluminium casement window fastener (powder coated )

each

42.00

8662

Aluminium casement window fastener (polyester powder coated)

each

52.00

8663

Aluminium round shape handle (anodised AC 15)

each

58.00

8664

Aluminium round shape handle (powder coated)

each

62.00

8665

Aluminium round shape handle (polyester powder coated)

each

35.00

8666

Stainless steel screws 25 mm x4 mm

100 Nos

250.00

8774

Aluminium Grill

kg

20.00

8776

Stainless steel dash fastener of 8 mm dia and 75 mm long bolt

each

1900.00

8778

Toughened glass 12 mm thickness

sqm

1.78

9999

Sundries

L.S.

8649
8650
8651
8652
8653

cartridge

340.00

100 Nos

32.00
2350.00
185.00
225.00
290.00
515.00
925.00

360

SUB HEAD : 21 - ALUMINIUM WORK

21.0 ALUMINIUM WORK

Code No.

Description

21.1

Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733
and IS: 1285, fixing with dash fasteners of required dia and size,
including necessary filling up the gaps at junctions, i.e. at top, bottom
and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and
jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / paneling, C.P. brass / stainless
steel screws, all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing, paneling and dash fasteners
to be paid for separately) :
For fixed portion

21.1.1.1

21.1.1.2

Anodised aluminium (anodised transparent or dyed to

required shade according to IS: 1868, Minimum anodic
coating of grade
AC 15)

kg

348.50

21.1.1.3

Powder coated aluminium (minimum thickness of powder

coating 50 micron)

kg

377.75

21.1.2

Polyester powder coated aluminium (minimum thickness of

polyester powder coating 50 micron)

kg

385.10

Anodised aluminium (anodised transparent or dyed to

required shade according to IS: 1868, Minimum anodic
coating of grade
AC 15)

kg

405.90

Powder coated aluminium (minimum thickness of powder

coating 50 micron)

kg

435.75

Polyester powder coated aluminium (minimum thickness of

polyester powder coating 50 micron)

kg

443.20

21.1.2.2
21.1.2.3

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision
for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be
paid for separately)

Providing and fixing 12 mm thick prelaminated particle board flat

pressed three layer or graded wood particle board conforming to IS:
12823 Grade l Type ll, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws
etc. complete as per architectural drawings and directions of engineerin-charge.
21.2.1
21.2.2

21.3

Rate `

21.1.1

21.1.2.1

21.2

Unit

Pre-laminated particle board with decorative lamination on one

side and balancing lamination on other side

1040.95
sqm

Pre-laminated particle board with decorative lamination on both

sides
sqm

Providing and fixing glazing in aluminium door, window, ventilator

1089.75

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of
engineer-in-charge.

SUB HEAD : 21 - ALUMINIUM WORK

361

Code No.

Description

Unit

Rate `

(Cost of aluminium snap beading shall be paid in basic item):

21.4

21.5

21.6

21.7

21.3.1

With float glass panes of 4.0 mm thickness

sqm

828.75

21.3.2

With float glass panes of 5.50 mm thickness

sqm

1054.20

21.3.3

With float glass panes of 8 mm thickness

sqm

1338.40

Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS : 6315, having brand logo
embossed on the body / plate with double spring mechanism and door
weight upto 125 kg, for doors, including cost of cutting floors,
embedding in floors as required and making good the same matching to
the existing floor finishing and cover plates with brass pivot and single
piece M.S. sheet outer box with slide plate etc. complete as per the
direction of Engineer-in-charge.
21.4.1

With stainless steel cover plate minimum 1.25 mm thickness

each

2039.00

21.4.2

With brass cover plate minimum 1.25 mm thickness

each

2213.20

Providing and fixing powder coated aluminium work (minimum

thickness of powder coating 50 micron) consisting of tee/ angle sections,
of approved make conforming to IS : 733 in frames of false ceiling
including aluminium angle cleats with necessary C.P. brass/ stainless
steel sunk screws, aluminium perimeter angles fixed to wall with
stainless steel rawl plugs @ 450 mm centre to centre and fixing the
frame work to G.I. level adjusting hangers 6 mm dia. with necessary
cadmium plated machine screws all complete as per approved
architectural drawings and direction of the Engineer-incharge (level
adjusting hangers, ceiling cleats and expansion
hold fasteners to be paid for separately).

kg

468.40

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto

1200mm length), fixed to roof slabs by means of ceiling cleats made out
of G.I. flat 40x3mm size 60 mm long and stainless steel expandable
dash fastener of 12.5 mm dia and 50 mm long, complete as per
direction of Engineer in-charge.

each

107.00

21.7.1
Anodised aluminium sheet 2.5mm thick (anodised
transparent or dyed to required shade according to IS: 1868,
Minimum
anodic coating of grade AC 15)

kg

480.25

Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)

kg

509.50

Providing and fixing machine moulded aluminium covering of

approved pattern & design, made out of machine cut aluminium sheet
and machine holed for receiving dash fastener, over expansion
joints on vertical surfaces/ceiling floors, the fixing on plate in one row
on one side of joint only shall be done with stainless steel dash
fasteners of 8 mm dia and 75 mm long bolt including providing
aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of
200mm centre to centre including drilling holes in the receiving surface
and providing expandable plastic sleeves in holes etc. complete as per
direction of Engineer-in-charge.

21.7.2
21.8

Filling the gap in between aluminium frame & adjacent RCC/ Brick/
Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.
21.8.1

362

Upto 5mm depth and 5 mm width

metre

88.75

SUB HEAD : 21 - ALUMINIUM WORK

Code
No.

21.9

21.10

21.11

21.12

Description

Unit

Extra for applying additional anodic coating AC 25 instead of AC 15 to

aluminium extruded sections.
21.9.1

For fixed portion

kg

11.60

21.9.2

For shutters of doors, windows & ventilators

kg

11.60

Providing and fixing double glazed hermetically sealed glazing in

aluminium windows, ventilators and partition etc. with 6 mm thick clear
float glass both side, having 12 mm air gap, including providing
EPDM gasket, perforated aluminium spacers, desiccants, sealant
(Both primary and secondary sealant) etc. as per specifications,
drawings and direction of
Engineer-in-charge complete.
Providing and fixing stainless steel (SS 304 grade) adjustable
friction windows stays of approved quality with necessary stainless steel
screws etc. to the side hung windows as per direction of Engineerincharge complete.
21.11.1 205 X 19 mm
21.11.2 255 X 19 mm
21.11.3 355 X 19 mm
21.11.4 510 X 19 mm
21.11.5 710 X 19 mm
Providing and fixing aluminium tubular handle bar 32 mm outer dia,
3.0 mm thick & 2100 mm long with SS screws etc .complete as per
direction of Engineer-in-Charge.

3487.10

each
each
each
each
each

228.75
275.25
350.70
612.05
1088.30

Anodized (AC 15 ) aluminium tubular handle bar

each

463.00

21.12.2

Powder coated minimum thickness 50 micron aluminium

tubular handle bar

each

508.55

Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

each

519.95

each

418.65

kg

312.20

21.13
Providing and fixing 100mm brass locks (best make of approved
quality) for aluminium doors including necessary cutting and making good etc.
complete.

21.15

sqm

21.12.1

21.12.3

21.14

Providing and fixing anodised aluminium (anodised transparent or

dyed to required shade according to IS: 1868. Minimum anodic coating
of grade AC 15) sub frame work for windows and ventilators with
extruded built up standard tubular sections of approved make
conforming to IS: 733 and IS: 1285, fixed with dash fastener of required
dia and size (Dash fastener
to be paid for separately).
Providing and fixing aluminium casement windows fastener of required
length for aluminium windows with necessary screws etc. complete.
21.15.1
21.15.2

Anodized (AC 15) aluminium

each

54.00 Powder coated minimum thickness 50 micron aluminium

21.15.3

each
55.15

Polyester powder coated minimum thickness 50 micron

aluminium
21.16

Rate `

each

54.00

Providing and fixing aluminium round shape handle of outer dia 100 mm
with SS screws etc. complete as per direction of Engineerin-charge
21.16.1

21.16.2

Anodized (AC 15 )
aluminium

Powder coated
minimum thickness

50 micron aluminium

SUB HEAD : 21 - ALUMINIUM WORK

each

65.60

each

72.60

363

Code No.

Description

21.16.3
21.17

21.18

Polyester powder coated minimum thickness 50 micron

aluminium

Providing and fixing anodised aluminium grill (anodised transparent

or dyed to required shade according to IS: 1868 with minimum anodic
coating of grade AC 15) of approved design/pattern, with approved
standard section and fixed to the existing window frame with C.P. brass/
stainless steel screws @ 200 mm centre to centre, including cutting
the grill to proper opening size for fixing and operation of handles and
fixing approved anodised aluminium standard section around the
opening, all complete as per requirement and direction of Engineer-incharge. (Only weight of
grill to be measured for payment).
Providing and fixing 12 mm thick frameless toughened glass door
shutter of approved brand and manufacture, including providing and
fixing top & bottom pivot & spring type fixing arrangement and making
necessary holes etc. for fixing required door fittings, all complete as
per direction of Engineer-in-charge (Door handle, lock and
stopper etc.to be paid
separately).

Unit

Rate `

each

77.25

403.35
kg

4746.25
sqm

364

SUB HEAD : 21 - ALUMINIUM WORK

SUB-HEAD : 22.0

WATER PROOFING

365

366

BASIC RATES (SH: 22.0 WATER

PROOFING)

Carriag
e of
cement

Unit

Code
No.

Description

0002

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

0012

Vibrator (Needle type 40 mm)

0101

Bhisti

0114

Beldar

0115

Coolie

0123

Mason (brick layer) 1 st class

0124

Mason (brick layer) 2nd class

0125

Mason (for plain stone work) 2nd class

0128

Mate

0130

Mistry

0131

Painter

0155*

Mason (average)

0159

Skilled torch operator for laying tack

0285

Brick Aggregate (Single size) : 63 mm nominal size

0295

Stone Aggregate (Single size) : 20 mm nominal size

0296

Stone Aggregate (Single size) : 12.5 mm nominal size

0297

Stone Aggregate (Single size) : 10 mm nominal size

0313
0316

Blown type petroleum bitumen of penetration 85/25 of approved

quality

sqm

0318

Bitumen solution primer of approved quality

sqm

0319

Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I

sqm

0322

Bitumen felt as per IS 7193 Grade II

tonne

0367

Bitumen felt :Type 3 grade 1

quintal

0370

Portland Cement

cum

0982

Coal (steam)

sqm

1169

Coarse sand (zone III)

cum

1177

Kota stone slab 25mm thick (rough chiseled)

1213

Stone grit 6 mm and down size or pea sized gravel

1241

Water proofing materials

tonne

2200

Commercial LPG in cylinder

cum

2202

Carriage of steam coal

cum

2203

Carriage of stone aggregate below 40 mm nominal size

tonne

2209

Carriage of coarse sand

day
day
day
day
day
day
day
day
day
day
day
day
day
cum
cum
cum
cum
tonne
litre

kilogram
kg

Rate `

800.0
0
350.0
0
363.0
0
329.0
0

0
399.00
399.00
363.00
435.00
399.00
417.00
435.00
600.00

1175.0
0
49600.0
0
50.0
0

6300.00
400.00
1200.00
290.00
1140.00

70.0
0

35.00

80.0
0

121.70

70.0
0

106.49

88.00

106.49

329.0
0

1175.00

435.0

1175.00

94.65

SUB HEAD : 22 - WATER PROOFING

367

Code
No.

2211
2216
2260
3002
7233
7427
7428
7429
8200
8201
8203
8204
8205
8206
8207
8501
8502
9999

Description

Unit

Rate `

Carriage of tar / bitumen

tonne

106.49

Carriage of stone blocks white & red sand stone & kota stone slab

tonne

94.65

Carriage of brick aggregate

cum

115.75

Polyvinyle chloride sheet 400 micron thick

sqm

40.00

Fibre glass tissue reinforcement Type II Grade

sqm

100.00

metre

415.00

Water stops Serrated with central bulb (225 mm wide, 8-11 mm

metre

390.00

thick) Water stops Dumb bell with central bulb

metre

375.00

Kickers

sqm

80.00

A.P.P. modified polymeric felt (two layers) 1.5 mm thick

sqm

98.00

A.P.P. modified polymeric felt (two layers) 2 mm thick

sqm

100.00

A.P.P. modified 2 mm thick membrane reinforced with glass fibre

sqm

200.00

matt A.P.P. modified 3 mm thick membrane reinforced with glass

sqm

214.00

fibre matt A.P.P. modified 3 mm thick membrane reinforced with

litre

90.00

polyester matt Bitumen primer for bitumen membrane

sqm

45.00
kilogram

Geotextile 120 grams per sqm

150.00 sqm

membrane Polymer modified

44.00

cementation coating Fibre glass cloth

Sundries

L.S.

1.78

368

SUB HEAD : 22 - WATER PROOFING

22.0 WATER PROOFING

Code No.

Description

22.1

Providing and laying integral cement based treatment for water proofing
on horizontal surface at all depth below ground level for under ground
structures as directed by Engineer-in-Charge and consisting of : i) Ist
layer of 22 mm to 25 mm thick approved and specified rough stone
slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3
coarse sand) mixed with water proofing compound conforming to
IS:2645 in the recommended proportion over the leveling course
(leveling course to be paid separately). Joints sealed and grouted with
cement slurry mixed with water proofing compound. ii) 2nd layer of 25
mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with
water proofing compound in recommended proportions. iii) Finishing
top with stone aggregate of 10 mm to 12 mm nominal size spreading
@ 8 cudm/sqm thoroughly embedded in the 2nd layer.
22.1.1

22.2

22.4

Rate `

sqm

1022.45

sqm

1243.25

sqm

522.90

metre

490.20

Providing and laying integral cement based treatment for water proofing
on the vertical surface by fixing specified stone slab 22 mm to 25 mm
thick with cement slurry mixed with water proofing compound
conforming to IS:2645 in recommended proportions with a gap of 20
mm (minimum) between stone slabs and the receiving surfaces and
filling the gaps with neat cement slurry mixed with water proofing
compound and finishing the exterior of stone slab with cement mortar
1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement
punning mixed with water proofing compound in recommended
proportion complete at all levels and as directed by Engineer-incharge :
22.2.1

22.3

Using rough kota stone.

Unit

Using rough Kota stone

Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and the like
consisting of:
(i)

Ist course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS
2645 in recommended proportions including rounding off
junction of vertical and horizontal surface.

(ii)

IInd course of 20 mm cement plaster 1:3 (1 cement : 3

coarse sand) mixed with water proofing compound in
recommended proportion including rounding off junction
of vertical and horizontal surface.

(iii)

IIIrd course of applying blown or residual bitumen applied hot

at 1.7 kg. per sqm of area.

(iv)

IVth course of 400 micron thick PVC sheet. (Overlaps at

joints of PVC sheet should be 100 mm wide and pasted to
each
other with bitumen @ 1.7 kg/sqm).

Providing and Placing in position suitable PVC water stops conforming

to IS:12200 for construction/ expansion joints between two RCC
members and fixed to the reinforcement with binding wire before
pouring concrete etc. complete :
22.4.1

Serrated with central bulb (225 mm wide, 8-11 mm thick)

SUB HEAD : 22 - WATER PROOFING

369

Code No.

22.5

22.6

Description

22.4.2
thick)

Dumb bell with central bulb (180 mm wide, 8 mm

22.4.3

Kickers (320 mm wide, 5 mm thick)

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing
cement compound consisting of applying : a) First layer of slurry of
cement @ 0.488 kg/sqm mixed with water proofing cement compound
@ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b)
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water
proofing cement compound @ 0.126 kg/sqm. This layer will be
allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all
joints, corners, junctions of pipes
and masonry with polymer mixed slurry.

Rate `

metre

461.15

metre

443.75

sqm

283.10

sqm

390.35

Providing and laying water proofing treatment on roofs of slabs by

applying cement slurry mixed with water proofing cement compound
consisting of applying: a) after surface preparation, first layer of slurry
of cement @ 0.488 kg/sqm mixed with water proofing cement
compound @ 0.253 kg/ sqm. b) laying second layer of Fibre glass cloth
when the first layer is still green. Overlaps of joints of fibre cloth should
not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of
slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement
compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will
be allowed to air cure for 4 hours followed by water curing for 48 hours.
The entire treatment will be taken upto 30 cm on parapet wall and
tucked into groove in parapet all around. d) fourth and final layer of
brick tiling with cement mortar (which will be paid for separately. For
the purpose of measurement the entire treated
surface will be measured.

22.7

Unit

Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations: a) Applying a
slurry coat of neat cement using 2.75 kg/sqm of cement admixed with
water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto
300 mm height including cleaning the surface before treatment. b)
Laying brick bats with mortar using broken bricks/brick bats 25 mm to
115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge over 20 mm thick layer of cement
mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of walls and
slabs c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge including laying glass fibre cloth of approved quality
in top layer of plaster and finally finishing the surface with trowel with
neat cement slurry and making pattern of 300x300 mm square 3 mm
deep. e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

370

SUB HEAD : 22 - WATER PROOFING

Code No.

Description

Unit

Rate `

sqm

1019.05

sqm

356.05

Providing and laying six courses water proofing treatment with

bitumen felt over roofs consisting of first, third and fifth course of blown
bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20
and 1.45 Kg per square metre of area respectively, second and fourth
courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian
based self finished bitumen felt) conforming to IS : 1322 and sixth and
final course of stone grit 6 mm and down size or pea sized gravel
spread at 6 cubic dm per sqm including preparation of surface but
excluding grading,
complete.

sqm

553.90

Providing and laying six courses water proofing treatment with

bitumen felt over roofs consisting of first, third and fifth courses of blown
or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per
square metre of area respectively, second and fourth courses of roofing
felt type 2 grade I (fibre base self finished bitumen felt) six and final
courses of stone grit 6 mm and down size or pea sized gravel spread at
6cu.dm per sqm including
preparation of surface, excluding grading, compete.

sqm

608.55

Providing and laying six courses water proofing treatment with bitumen
felt over roofs consisting of first, third and fifth courses of blow or/ and
residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre
of area respectively, second and fourth courses of roofing felt type 2
grade II (glass fibre base self finished bitumen felt) and sixth and final
course of stone grit 6 mm and down size or pea sized gravel spread at 6
cubic dm
per sqm including preparation of surface but excluding grading, complete.

sqm

608.80

Supplying and applying bituminous solution primer on roof and or wall

surface at 0.24 litre per sqm.

sqm

31.40

operations to be done in order and as directed and specified by the

Engineer-in-Charge :
22.7.1
22.8

With average thickness of 120 mm and minimum thickness at

khurra as 65 mm.

Providing and laying four courses water proofing treatment with bitumen
felt over roofs consisting of first and third courses of blown bitumen
85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square
metre of area for each course, second course of roofing felt type 3
grade-I (hessian based self finished bitumen felt) and fourth and final
course of stone grit 6 mm and down size or peasized gravel spread
at 6 cubic diameter per square metre including preparation of surface
but excluding grading complete with :
22.8.1

Bitumen felt (hessian base) type 3 grade I conforming to IS :

1322

22.9

22.10

22.11

22.12
22.13

Deduct for omitting in water proofing treatment final course of spreading

stone grit 6 mm down size or pea sized gravel :
22.13.1
22.13.2

22.14

at 6 cudm per sqm

at 8 cudm per sqm

Grading roof for water proofing treatment with

22.14.1

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

sqm
14.55 sqm
18.55

stone aggregate 20 mm nominal size)

SUB HEAD : 22 - WATER PROOFING

cum

5570.55

371

Code No.

Description

Unit

Rate `

22.14.2

cum

9205.70

cum

8238.25

Providing and laying in situ seven course water proofing treatment with
APP (Atactic poly-propylene) modified Polymeric memberane over roof
consisting of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd, 4th &
6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of
blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th
layers of roofing membrane APP modified Polymeric membrane 1.5 mm
thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with
centre core as 20 micron HMHDPE film sandwiched on both sides with
polymeric mix and the polymeric mix is protected on both side with 20
micron HMHDPE film. 7th, the top most layer shall be finished with brick
tiles of class designation 10 grouted with cement mortar 1:3 (1cement :
3 fine sand) mixed with 2% integral water proofing compound by weight
of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine
sand)
and finished neat (item of laying brick tiles shall be paid for separately).

sqm

526.25

Providing and laying in situ five course water proofing treatment with
APP (Atactic Polypropylene) modified Polymeric memberane over
roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd
& 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of
blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of
roofing membrane APP modified Polymeric membrane 2.0 mm thick of
3.00 Kg/ sqm weight consisting of five layers prefabricated with centre
core as 100 micron HMHDPE film sandwiched on both sides with
polymeric mix and the polymeric mix is protected on both side with 20
micron HMHDPE film. 5th, the top most layer shall be finished with brick
tiles of class designation 10 grouted with cement mortar 1:3 (1 cement
: 3 fine sand) mixed with 2% integral water proofing compound by
weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement :
3 fine sand) and finished neat
(item of laying brick tiles shall be paid for separately).

sqm

356.90

Providing and laying in situ seven course water proofing treatment

with APP (Atactic Polypropylene) modified Polymeric memberane over
roof consisting of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd,
4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall
consist of blown type bitumen of grade 85/25 conforming to IS : 702,
3rd and 5th layers of roofing membrane APP modified Polymeric
membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five
layers prefabricated with centre core as 100 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix is
protected on both side with 20 micron HMHDPE film. 7th, the top most
layer shall be finished with brick tiles of class designation 10 grouted
with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral
water proofing compound by weight of cement over a 12 mm layer of
cement mortar 1:3 ( 1 cement : 3 fine sand)
and finished neat (item of laying brick tiles shall be paid for separately).

sqm

572.25

22.14.3

Cement mortar 1:3 (1 cement : 3 coarse

sand)
Cement mortar 1:4 (1cement : 4 coarse sand)

22.15

22.16

22.17

22.18

Providing and fixing APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 2 mm thick water proofing membrance, black
finished reinforced with glass fibre matt consisting of a coat of bitumen

primer for

372

SUB HEAD : 22 - WATER PROOFING

Code No.

22.19

Description

Unit

Rate `

bitumen membrane @ 0.40 litre/sqm by the same membrance

manufacture of density at 25C, 0.87 - 0.89 kg/ litre and viscocity 70 160 cps. Over the primer coat the layer of membrane shall be laid
using Butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane
shall be as under: Joint strength in longitudinal and transverse direction
at 23C as 350/300 N/ 5 cm. Tear strength in longitudinal and
transverse direction as 60/80N. Softening point of membrane not less
than 150C. Cold flexibility shall be upto -2C when tested in
accordance with ASTM, D - 5147. The laying of membrane shall be got
done through the authorised applicator of the manufacture of
membrane.
22.18.1 2mm (for corrugated roof sheets)

sqm

279.70

sqm

407.50

sqm

425.35

sqm

74.85

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer, 3 mm thick water proofing membrane, black
finished reinforced with glass fibre matt consisting of a coat of bitumen
primer for bitumen membrane @ 0.40 litre/sqm by the same membrane
manufactured of density at 25C, 0.87 - 0.89 kg/litre and viscocity 70
-160 cps. Over the primer coat the layer of membrane shall be laid
using butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane
shall be as under : Joint strength in longitudinal and transverse direction
at 23C as 350/300 N/5 cm. Tear strength in longitudinal and transverse
direction as 60/80N. Softening point of membrane not less than 150C.
Cold flexibility shall be upto -2C when tested in accordance with ASTM,
D - 5147. The laying of membrane shall be got done through the
authorised applicator of the manufacturer of membrane :
22.19.1

22.20

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black
finished reinforced with non-woven polyester matt consisting of a coat of
bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same
membrane manufacture of density at 25C, 0.87-0.89 kg/ litre and
viscocity 70-160 cps. Over the primer coat the layer of membrane
shall be laid using Butane Torch and sealing all joints etc, and
preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23C as 650/ 450N/5cm. Tear
strength in longitudinal and transverse direction as 300/250N. Softening
point of membrane not less than 150C. Cold flexibility shall be upto
-2C when tested in accordance with ASTM, D -5147. The laying of
membrane shall be got done through the authorised applicator of the
manufacturer of membrane :
22.20.1

22.21

3 mm thick

3 mm thick

Extra for covering top of membrane with Geotextile, 120 gsm non
woven, 100% polyester of thickness 1 to 1.25 mm bonded to the
membrane with intermittent touch by heating the membrane by
Butane Torch as per
manufactures recommendation.

SUB HEAD : 22 - WATER PROOFING

373

374

SUB-HEAD : 23.0

PUBLISHED
SEPARATEL
Y

375

376

SUB-HEAD : 24.0

RAIN WATER HARVESTING

&
TUBEWELLS

377

378

BASIC RATES (SH: 24.0 RAIN WATER HARVESTING & TUBEWELLS)

Code
No.

Description

Unit

Rate `

Hire charges of Diesel Truck - 9 tonne

day

1700.00

Air compressor 250 cfm with two leads for pneumatic

cutters/hammers

day

2000.00

day

7500.00

0113

Hire and running charges of drill machine up to 400 mm dia

(including cost of mobile oil, diesel consumption in ordinary soil and
operator)

day

329.00

0114

Chowkidar

day

329.00

0123

Beldar

day

435.00

0124

Mason (brick layer) 1 st class

day

399.00

1235

Mason (brick layer) 2nd class

litre

55.49

7743

Diesel oil

7744

M.S. pipe 150 mm dia casing pipe

7745

M.S. pipe 200 mm dia casing pipe

7746

PVC blind pipe 150 mm dia as per IS: 12818

7747

PVC blind pipe 200 mm dia as per IS: 12818

7748

M.S. cap 150 mm dia

7749

M.S. cap 200 mm dia

7750

M.S bail plug 150 mm dia

7751

M.S bail plug 200 mm dia

7752

PVC slotted pipe 150 mm dia as per IS: 12818

7753

PVC slotted pipe 200 mm dia as per IS: 12818

7754

Boulder 50 mm to 200 mm

7755

Gravel 5 mm to 10 mm

7756

Gravel 1.5 mm to 2 mm

7757

Gravel 3 mm to 6 mm

7758

M.S. pipe 100 mm dia casing pipe

7759

uPVC blind pipe 100 mm dia as per IS: 12818

7760

uPVC slotted pipe 100 mm dia as per IS: 12818

7761

M.S. cap 100 mm dia

7762

M.S. bail plug 100 mm dia

7763

Precast R.C.C. perforated slab

7764

Water supply tanker of 5000 litre capacity

7765

M.S. socket 100 mm dia

7766

M.S. socket 150 mm dia

7772

M.S. socket 200 mm dia

9999

Pea Gravel

0005
0040
0080

Sundries

metre
1060.00 metre
1300.00 metre
500.00 metre
750.00 each
160.00 each
200.00 each
200.00 each
220.00 metre
450.00 metre
700.00 cum
350.00 cum
700.00 cum
650.00 cum
680.00 metre
770.00 metre
360.00 metre
380.00 each
130.00 each
160.00 each
800.00 each
800.00 each
180.00 each
220.00 each
280.00 cum
750.00
L.S.

1.78

SUB HEAD : 24 - RAIN WATER HARVESTING & TUBEWELLS

379

24.0 RAIN WATER HARVESTING & TUBEWELLS

Code No.

Description

24.1

Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per direction
of Engineer -in-charge, upto 90 metre depth below ground level.

24.2

24.3

Unit

Rate `

24.1.1

All types of soil

metre

407.10

24.1.1.1

300 mm dia

metre

445.25

24.1.1.2

350 mm dia

metre

569.90

24.1.1.3

400 mm dia

24.1.2

Rocky strata including Boulders

24.1.2.1

300 mm dia

24.1.2.2

350 mm dia

24.1.2.3

400 mm dia

metre
920.10 metre
958.00
metre

1,090.55

Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per direction
of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below
ground level.
24.2.1

All types of soil

metre

474.90

24.2.1.1

300 mm dia

metre

527.70

24.2.1.2

350 mm dia

metre

712.40

24.2.1.3

400 mm dia

24.2.2

Rocky strata including Boulders

metre

988.50

24.2.2.1

300 mm dia

metre

24.2.2.2

350 mm dia

1021.90

24.2.2.3

400 mm dia

metre

Supplying, assembling, lowering and fixing in vertical position in bore

well, unplasticized PVC medium well casing (CM) pipe of required
dia, conforming to IS: 12818, including required hire and labour charges,
fittings & accessories etc. all complete, for all depths, as per direction of
Engineer -in-charge.
24.3.1

100 mm nominal size dia

metre

24.3.2

150 mm nominal size dia

424.20 metre

24.3.3

200 mm nominal size dia

587.05
metre

24.4

1287.80

Supplying, assembling, lowering and fixing in vertical position in bore

well unplasticized PVC medium well screen (RMS) pipes with ribs,

878.60

conforming to IS: 12818, including hire & labour charges, fittings &
accessories etc. all complete, for all depths, as per direction of
Engineer-in-charge.

380

SUB HEAD : 24 - RAIN WATER HARVESTING & TUBEWELLS

Code No.

Description

24.4.1
dia 24.4.2
24.4.3
dia
24.5

24.6

Unit

100 mm nominal size

metre

150 mm nominal

447.65 metre

size dia

528.95

200 mm nominal size

metre

820.80

cum

504.15

cum

910.65

cum

852.60

Gravel packing in tubewell construction in accordance with IS:

4097, including providing gravel fine/ medium/ coarse, in required
grading & sizes as per actual requirement, all complete as per direction
of Engineerin-charge.

cum

987.85

Providing and fixing factory made precast RCC perforated drain

covers, having concrete of strength not less than M-25, of size 1000 x
450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos
cross sectional T.M.T. hoop bars, including providing 50 mm dia
perforations @ 100 to 125 mm c/c, including providing edge binding with
M.S. flats of size 50 mm
mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

each

960.20

metre

978.70

metre

1,335.40

metre

1,638.55

Supplying, filling, spreading & leveling stone boulders of size range 5

cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all
complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5 mm to
10 mm, in the recharge pit, over the existing layer of boulders, in
required thickness, for all leads & lifts, all complete as per direction of
Engineer-incharge.

24.7
Supplying, filling, spreading & leveling coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads
& lifts, all complete as per direction of Engineer -in-charge.
24.8

24.9

24.10

Rate `

Supplying, assembling, lowering and fixing in vertical position in bore

well, ERW (Electric Resistance Welded) FE 410 mild steel screwed
and socketed/ plain ended casing pipes of required dia, conforming
to IS: 4270, of reputed & approved make, including painted with outside
surface with two coats of anticorrosive paint of approved brand and
manufacture, including required hire & labour charges, fittings &
accessories, all complete, for all depths, as per direction of Engineerin-charge.
24.10.1

100 mm nominal size dia having minimum wall thickness

5.00 mm

24.10.2

150 mm nominal size dia having minimum wall thickness

5.00 mm

24.10.3

200 mm nominal size dia having minimum wall thickness

5.40 mm

24.11

Supplying, assembling, lowering and fixing in vertical position in bore

well, ERW (Electric Resistance Welded) FE 410 plain slotted (having
slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel
ended pipe (type A) of required dia, conforming to IS: 8110, of
reputed and approved make, having wall thickness not less than 5.40
mm, including painted with outside surface with two coats of

anticorrosive bitumestic paint of approved brand and manufacture,

including hire & labour charges, fittings & accessories, all complete, for
all depths, as per direction of Engineer -in-charge.
24.11.1

100 mm nominal size dia

SUB HEAD : 24 - RAIN WATER HARVESTING & TUBEWELLS

metre

1,041.15

381

Code No.

24.12

24.13

24.14

24.15

Description

24.11.
2

150 mm nominal size

dia

24.11.
3

200 mm nominal size

dia

Development of tube well in accordance with IS : 2800 (part I) and IS:

11189, to establish maximum rate of usable water yield without sand
content (beyond permissible limit), with required capacity air
compressor, running the compressor for required time till well is
fully developed, measuring yield of well by V notch method or any
other approved method, measuring static level & draw down etc. by
step draw down method, collecting water samples & getting tested
in approved laboratory, i/c disinfection of tubewell, all complete,
including hire & labour charges of air compressor, tools &
accessories etc., all as per requirement and
direction of Engineer-in-charge.

Unit

Rate `

metre

1,418.65

metre

1,722.45

hour

677.10

Providing and fixing suitable size threaded mild steel cap or spot
welded plate to the top of bore well housing/ casing pipe, removable
as per requirement, all complete for borewell of:
24.13.1

100 mm dia

each

158.55

24.13.2

150 mm dia

each

195.15

24.13.3

200 mm dia

each

243.90

Providing and fixing M.S. clamp of required dia to the top of

casing/housing pipe of tubewell as per IS: 2800 (part I), including
necessary bolts & nuts f required size complete.
24.14.1

100 mm clamp

each

1,107.80

24.14.2

150 mm clamp

each

1,170.95

24.14.3

200 mm clamp

each

1,329.35

Providing and fixing Bail plug/ Bottom plug of required dia to the
bottom of pipe assembly of tubewell as per IS:2800 (part I).
24.15.1

100 mm dia

each

196.20

24.15.2

150 mm dia

each

242.65

24.15.3

200 mm dia

each

265.85

382

SUB HEAD : 24 - RAIN WATER HARVESTING & TUBEWELLS

SUB-HEAD : 25.0

CONSERVATION
OF
HERITAGE BUILDING

383

384

BASIC RATES (SH: 25.0 CONSERVATION OF HERITAGEBUILDINGS)

Code
No.

0101
0103
0114
0115
0116
0124
0155*
0159
0773
1034
1182
2205
4009
7346
7387
7397
7398
7399
7767
7768
7769
7770
7771
7775
9999

Description

Unit

Rate `

Bhisti

day

363.00

Blacksmith 2nd class

day

399.00

Beldar

day

329.00

Coolie

day

329.00

Fitter (grade 1)

day

435.00

Mason (brick layer) 2nd class

day

399.00

Mason (average)

day

417.00

Skilled torch operator for laying tack

day

435.00

Unslaked lime

quintal

300.00

Bolts and nuts up to 300 mm in length

quintal

5600.00

Surkhi

cum

700.00

Carriage of steel

tonne

94.65

kilogram

55.00

each

55.00

kilogram

45.00

Base Jack

each

180.00

Challies

each

800.00

Cup locks

each

80.00

Stone cleaning chemical approved by ASI

litre

165.00

Water repallent chemical approved by

litre

1587.00

ASI

litre

1020.00

Stone surface strengthening chemical approved by

litre

68.00

ASI Turpentine oil

litre

161.00

Liquid Amonia 5%

kilogram

630.00

Mild steel tubes hot finished welded type

Double coupler
Spigot for standard jointing

Sodium pentachlorophenate
Sundries

L.S.

1.78

SUB HEAD : 25 - CONSERVATION OF HERITAGE BUILDINGS

385

25.0 CONSERVATION OF HERITAGE BUILDINGS

Code
No.

25.1

25.2

25.3

25.4

25.5

Description

Unit

Rate `

Raking out joints of stone masonry surface to the required width and
depth, with due care and precaution, by mechanical / manual means,
including preparing and cleaning the surface for re-pointing/ refilling of
joints, including disposal of rubbish to the dumping ground within 50
metre
lead.

sqm

26.55

Providing and fixing double scaffolding system (cup lock type) on the
exterior side of building/structure, upto 25 metre height, above ground
level, including additional rows of scaffolding in stepped manner as per
requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre
centre to centre, horizontal & vertical tubes joint with cup & lock system
with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in
the scaffolding for working platform etc. and maintaining it in a
serviceable condition for execution of work of cleaning and/ or pointing
and/ or applying chemical and removing it thereafter. The scaffolding
system shall be stiffened with bracings, runners, connecting with the
building etc, wherever required, if feasible, for inspection of work at
required locations with essential safety features for the workmen etc.,
complete as per directions
and approval of Engineer-in-charge.

sqm

159.90

Note:- (1) The elevational area of the scaffolding shall be measured for
payment purpose.
(2) The payment will be made once only for execution of all
items for such works.
Cleaning the sand stone surface and removing dirt, dust, bird dropping,
grease, oil, algae, fungus, monkey beats, vegetable growth etc.,
including providing, applying and washing the surface with liquid
Ammonia Chemical of 5% solution and other chemical cleaning
agent as approved by Archaeological Survey of India/ Engineerincharge, of approved brand and manufacturer, with the help of
required scrubbers and also cleaning with machine operated water jet
mixed with desired quantity of fine silica where ever required, without
causing any scratching/ damage to the stone surface and finally
washing the surface with clean water with the help of pressure jet
machine, complete in all respect, including taking all precautions
to safeguard ventilators, windows, doors etc. by suitable covering so
as to avoid any damage to the building/ structure, all as per direction of
Engineer-in-charge (The rate is inclusive of all materials &
labours involved except scaffolding).

sqm

81.75

Providing and applying antifungal wash treatment using 3% solution of

sodium pentachlorophenate, of reputed brand and manufacturer, on
cleaned sand stone surface at desired locations as per direction of
Engineer-in-charge (The rate is inclusive of all materials & labours
involved
except scaffolding).

sqm

33.75

Ruled / Flush pointing on Red sand stone masonry surface with lime,
surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5
surkhi (50% red and 50% light yellow surkhi ):1/2 marble dust}. (The
rate
is inclusive of all materials & labours involved except scaffolding).

sqm

143.55

386

SUB HEAD : 25 - CONSERVATION OF HERITAGE BUILDINGS

Code
No.

25.6

25.7

25.8

Description

Unit

Rate `

(The rate is inclusive of all materials & labours involved except scaffolding). sqm

143.55

Applying two or more coat of Ethyl Silicate chemical as approved by

Archaeological Survey of India/ Engineer-in-charge, of approved brand
and manufacturer, with brush or spray on the existing stone masonry
surface till there is no further absorption of chemical by stone surface,
including protecting the applied surface from direct sunlight by suitable
means during application, all complete as per direction of the Engineerin-Charge (The rate is inclusive of all materials & labours involved
except
scaffolding).

sqm

264.80

Applying breathable, non-reactive, antifungal, and water repellant

Silane/ Siloxane chemical as approved by Archaeological Survey
of India/ Engineer-in-charge, of approved brand and manufacture,
diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part
of approved chemical :12 Part of Turpentine oil), on the existing sand
stone masonry surface with two or more coats to give uniform
application of chemical on the surface, all complete as per direction of
Engineer-In-charge (The rate
is inclusive of all materials & labours involved except scaffolding).

sqm

81.10

Ruled/ Flush pointing on White sand stone masonry surface with lime,
surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime : 1.5
surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}.

SUB HEAD : 25 - CONSERVATION OF HERITAGE BUILDINGS

387

388

SUB-HEAD : 26.0

STRUCTURAL GLAZING
AND ALUMINIUM
COMPOSITE PANEL

389

390

BASIC RATES (SH: 26.0 STRUCTURAL GLAZING AND ALUMINIUM COMPOSITE PANEL)
Code
No.

Description

Unit

Rate `

Structural sealant - 6 mm x 12 mm

metre

35.00

Spacer tape 6.4 mm thick x 6 mm wide

metre

20.00

Weather Sealant - Non Staining (600 ml)

each

460.00

Weather Sealant - Normal (300 ml)

each

145.00

MS Brackets/Aluminium Alloy Brackets

kg

100.00

Silicon Gasket in Kg (Above 50 g / m)

kg

605.00

EPDM Gasket in Kg (Above 60 g / m)

kg

160.00

Anchor Fastner - M10

each

110.00

2613

SS Bolt with washer of sizes for structural glazing / ACP

Cladding

each

35.00

2614

each

5.00

SS Screws of sizes for structural glazing / ACP Cladding

2615

metre

25.00

Protective Tape

2616

kg

66.00

GI flashing - 1.2 mm Thick

2617

6 mm thick High performance glass

2618

6 mm thick clear heat strengthened glass

2619

6 mm thick clear heat strengthened glass

2620

ARMS GS HD -TOP HUNG -20"-TYPE P-COUPLE

2621

Connection Block

2622

Curtain wall striker

2623

Adjustable Fastening Pawl

2624

Corner drive

2625

Top wedge Block

2626

Glass wool Denisity 48 Kg / m3 with Black Glass Tissue (BGT)

2627

SS Screws - # 8 x 19

2628

Weather Sealant - DC 789

2629

Cement Board

2630

Baker rod

2631

4 mm thick ACP

2632

Fire Stop

2634

GI/Aluminium Sheet (0.8 mm thick)

7306

Aluminium T or L sections

7392

Powder coating 50 microns on aluminium sections

8654

Masking tape

8945

4 Point faade glass bracket

2605
2606
2607
2608
2609
2610
2611
2612

sqm

2000.00

sqm

770.00

each

145.00

pair

1570.80

each

39.35

each

105.00

each

38.25

each

294.95

each

135.00

sqm

230.00

each

10.00

cartridge

135.00

sqm

250.00

metre

5.00

sqm

1200.00

metre

565.00

kg

55.00

kilogram

200.00

kilogram

64.00

metre
Nos

2.60
3318.00

SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

391

Code
No.

8946
8947
8948
8949
9999

Description

Unit

Rate `

2 Point faade glass bracket

Nos

1659.00

1 Point faade glass bracket

Nos

1404.00

Flate head bolt

Nos

400 fin plate at top

651.00

Pair
5931.00

Sundries
L.S.

1.78

392

SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

26.0 STRUCTURAL GLAZING AND ALUMINIUM COMPOSITE PANEL

Code
No.

26.1

26.2

Description

Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved
shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per
BS 1474,including super durable powder coating of 60-80 microns
conforming to AAMA 2604 of required colour and shade as approved
by the Engineer-in-Charge. (The item includes cost of material such as
cleats, sleeves, screws etc. necessary for fabrication of extruded
aluminium frame work. Nothing extra
shall be paid on this account).
Designing, fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for all heights and all
levels, including:
a)

Structural analysis & design and preparation of shop drawings for

the specified design loads conforming to IS 875 part III (the system
must passed the proof test at 1.5 times design wind pressure
without any failure), including functional design of the aluminum
sections for fixing glazing panels of various thicknesses, aluminium
cleats, sleeves and splice plates etc. gaskets, screws, toggles,
nuts, bolts, clamps etc., structural and weather silicone sealants,
flashings, fire stop (barrier)-cum-smoke seals, microwave cured
EPDM gaskets for water tightness, pressure equalisation & drainage
and protection against fire hazard including:

b) Fabricating and supplying serrated M.S. hot dip galvanised /

Aluminium alloy of 6005 T5 brackets of required sizes, sections and
profiles etc. to accommodate 3 Dimentional movement for
achieving perfect verticality and fixing structural glazing system
rigidly to the RCC/ masonry/structural steel framework of building
structure using stainless steel anchor fasteners/ bolts, nylon
seperator to prevent bimetallic contacts with nuts and washers etc.
of stainless steel grade 316, of the required capacity and in required
numbers.
c) Providing and filling, two part pump filled, structural silicone sealant
and one part weather silicone sealant compatible with the structural
silicone sealant of required bite size in a clean and controlled factory
/ work shop environment , including double sided spacer tape,
setting blocks and backer rod, all of approved grade, brand and
manufacture, as per the approved sealant design, within and all
around the perimeter for holding glass.
d) Providing and fixing in position flashings of solid aluminium sheet 1
mm thick and of sizes, shapes and profiles, as required as per the
site conditions, to seal the gap between the building structure and
all its interfaces with curtain glazing to make it watertight.
e)

Making provision for drainage of moisture/ water that enters the

curtain glazing system to make it watertight, by incorporating
principles of pressure equalization, providing suitable gutter profiles
at bottom (if required), making necessary holes of required sizes
and of required numbers etc. complete. This item includes cost
of all inputs of designing, labour for fabricating and installation of

Unit

Rate `

kg

338.25

aluminium grid,
SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

393

Code No.

Description

Unit

Rate `

sqm

2,556.15

installation of glazed units, T&P, scaffolding and other incidental

charges including wastages etc., enabling temporary structures and
services, cranes or cradles etc. as described above and as
specified. The item includes the cost of getting all the structural
and functional design including shop drawings checked by a
structural designer, dully approved by Engineer-in-charge. The
item also includes the cost of all mock ups at site, cost of all
samples of the individual components for testing in an approved
laboratory, field tests on the assembled working structural glazing
as specified, cleaning and protection till the handing over of the
building for occupation. In the end, the Contractor shall provide a
water tight structural glazing having all the performance
characteristics etc. all complete as required, as per the Architectural
drawings, as per item description, as specified, as per the approved
shop drawings and as directed by the Engineerin-Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow
boxes, extruded aluminium section capping for fixing in the grooves of
the curtain glazing and vermin proof stainless steel wire mesh shall
be paid for separately under relevant items under this subhead.
However, for the purpose of payment, only the actual area of structural
glazing (including width of grooves ) on the external face shall be
measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on
structural glazing system if area of structural glazing exceeds 2500
Sqm from the certified laboratories accreditated by NABL(National
Accreditation Board for Testing and Calibration Laboratories),
Department of Science & Technologies, India. Cost of testing is
payable separately. The NIT approving authority will decide the
necessity of testing on the basis of cost of the work, cost of the test
and importance of the work. Performance Testing of Structural glazing
system Tests to be conducted in the NBL Certified laboratories
1.

Performance Laboratory Test for Air Leakage Test (-50pa to

300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method
for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.0105 testing method for a range upto 2000 ml

26.3

4.

Structural Performance Deflection and deformation by static air

pressure test (1.5 times desing wind pressure without any failure) as
per ASTME-330-10 testing method for a range upto 50 mm

5.

Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09

testing method for Qualitative test Tests to be conducted on site
6. Onsite Test for Water Leakage for a pressure range 50 kpa to
240 kpa (35psi)
upto 2000ml

Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass (double
glazed) vision panel units of size and shape as required and specified,
comprising of an outer heat strengthened float glass 6mm thick, of
approved colour and shade with reflective soft coating on surface # 2 of

approved colour and shade, an inner Heat strengthned clear float glass
6mm thick, spacer tube

394

SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

Code
No.

26.4

26.5

Description

Rate `

12mm wide, dessicants, including primary seal and secondary seal

(structural silicone sealant) etc. all complete for the required
performances, as per the Architectural drawings, as per the approved
shop drawings, as specified and as directed by the Engineer-in-Charge.
The IGUs shall be assembled in the factory/ workshop of the glass
processor. (Payment for fixing of IGU Panels in the curtain glazing is
included in cost of item No.26.2) For payment, only the actual area of
glass on face # 1 of the glass panels (excluding the areas of the
grooves and weather silicone sealant) provided and fixed in position,
shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft
coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear
Glass of approved make having properties as visible Light transmittance
(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection
external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of
3.0 to 3.3 W/m2 degree K etc. The properties of performance glass
shall be decided by
technical sanctioning authority as per the site requirement.
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such as heavy
duty stainless steel friction hinges, min 4 -point cremone locking sets
with stainless steel plates, handles, buffers etc. including necessary
stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete
as per the Architectural drawings, as per the approved shop drawings,
as specified
and as directed by the Engineerin- Charge.
Providing, fabricating and supplying shadow box of required size and
shape, for fixing in the spandrel portion of the structural glazing, in
linear as well as curvilinear portions of the building by providing semi
-rigid, inorganic, non-combustible fibre glass wool insulation 50 mm
thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer
shall have facing (factory bonded on surface # 1of the fibre glass
insulation layer), of black non-woven fibre glass tissue of nominal
thickness 0.5 mm and nominal mass not less than 60 gm / sqm, made
of randomly oriented glass fibres distributed in a binder by a wet-lay
process including fixing 1.5 mm thick solid aluminum sheet backing
using, 6 mm thick cement board including SS
rivets, nuts, bolts, washers etc complete.

26.6

Unit

Providing and supplying Spandrel Glass Panels comprising of 6 mm

thick heat strengthened monolithic float glass of approved colour and
shade with reflective soft coating on surface # 2 of approved colour and
shade so as to match the colour and shade of the IGUs in the vision
panels etc. ,all complete for the required performances as specified, as
per the Architectural drawings, as per the approved shop drawings, as
specified, and as directed by the Engineer- in-Charge. For payment,
only the actual area of glass on face # 1 of the glass panels (but
excluding the area of grooves and weather silicone sealant) provided
and fixed in position, shall be measured in sqm.(Payment for fixing of
Spandrel Glass Panels in the curtain glazing is included in cost of
relevent Item*).

4,090.95
sqm

3,062.25
sqm

1634.50

sqm

(i) Coloured tinted float glass 6mm thick substrate with reflective soft
coating on face # 2, having properties as visible Light transmittance
(VLT) of 25 to 35%, Light reflection internal 10 to 15%, light reflection
external 10 to
SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

395

Code
No.

26.7

Description

20%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m
degree K etc. The properties of performance glass shall be decided by
technical sanctioning authority as per the site requirement.

Unit

Rate `

sqm

2997.25

Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves for
linear as well as curvilinear portions of the building, for all heights and
all levels etc. including:
a) Structural analysis & design and preparation of shop drawings for
pressure equalisation or rain screen principle as required, proper
drainage of water to make it watertight including checking of all the
structural and functional design.
b) Providing, fabricating and supplying and fixing panels of aluminium
composite panel cladding in pan shape in metalic colour of approved
shades made out of 4mm thick aluminium composite panel material
consisting of 3mm thick FR grade mineral core sandwiched between
two Aluminium sheets (each 0.5mm thick). The aluminium composite
panel cladding sheet shall be coil coated, with Kynar 500 based
PVDF / Lumiflon based fluoropolymer resin coating of approved colour
and shade on face # 1 and polymer (Service) coating on face # 2 as
specified using stainless steel screws, nuts, bolts, washers, cleats,
weather silicone sealant, backer rods etc.
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip
Galvanised with serrations and serrated washers to arrest the wind load
movement, fasteners, SS 316 Pins and anchor bolts of approved make
in SS 316, Nylon separators to prevent bi-metallic contacts all
complete required to perform as per specification and drawing The
item includes cost of all material & labour component, the cost of all
mock ups at site, cost of all samples of the individual components for
testing in an approved laboratory, field tests on the assembled working
curtain wall with aluminium composite panel cladding, cleaning and
protection of the curtain wall with aluminium composite panel cladding
till the handing over of the building for occupation. Base frame work for
ACP cladding is payable under the relevant aluminium item.s The
Contractor shall provide curtain wall with aluminium composite panel
cladding, having all the performance characteristics all complete , as
per the Architectural drawings, as per item description, as specified, as
per the approved shop drawings and as directed by the Engineer-inCharge. However, for the purpose of payment, only the actual area on
the external face of the curtain wall with Aluminum Composite Panel
Cladding (including width of groove) shall be measured
in sqm. up to two decimal places.

26.8

Design supply & installation of suspended Spider Glozing system

designed to withstand the wind pressure as pr IS 875 (Part-III). The
Suspended System held with Spider Fittings of SS-316 Grade Steel
of approved manufacturer with glass panel having 12 mm thick clear
toughened glass held together with SS- 316 Grade Stainless steel
Spider & bolt assembly with laminated glass fins 21 mm thick. The
Glass fins and glass panel assembly shall be connected to Slab/beams
by means of SS- 316 Grade stainless steel brackets & Anchor bolts and
at the bottom using SS channel of 50x25x2mm using fastener & anchor
bolts, non staining weather sealants of approved make, Teflon/ nylon
bushes and separators to prevent bi-metallic

sqm

3775.30

396

SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

Code No.

Description

Unit

Rate `

contacts, all complete to perform as per specification and approved

drawings. The complete system to be designed to accommodate
thermal expansion & seismic movements etc. The joints between glass
panels (6 to 8 mm) and gaps at the perimeter & in U channel of the
assembly to be filled with non staining weather sealant, so as to make
the entire system fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing
including approval from structural designer, labour, T&P, scaffolding,
other incidental charges including wastage, enabling temporary
services all fitting fixers nut bolts, washer, Buffer plates, fastener,
anchors, SS channel laminated glass etc. all complete. For the purpose
of payment, actual elevation area of Glazing including thickness of
joints and the portion of Glass panel
inside the SS channel shall be measured.

3429.90
sqm

SUB HEAD : 26 - STRUCTURAL GLASING AND ALUMINIUM COMPOSITE PANEL

397

398

COEFFICIENTS
FOR CEMENT
CONSUMPTION

399

400

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

3.0 MORTAR
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

3.1

Cement Mortar 1:1 (1 cement : 1 fine sand).

cum

10.20

3.2

Cement mortar 1:2 (1 cement : 2 fine sand).

cum

6.80

3.3

Cement mortar 1:3 (1 cement : 3 fine sand).

cum

5.10

3.4

Cement mortar 1:4 (1 cement : 4 fine sand).

cum

3.80

3.5

Cement mortar 1:5 (1 cement : 5 fine sand).

cum

3.10

3.6

Cement mortar 1:6 (1 cement : 6 fine sand).

cum

2.50

3.7

Cement mortar 1:2 (1 cement : 2 coarse sand).

cum

6.80

3.8

Cement mortar 1:3 (1 cement : 3 coarse sand).

cum

5.10

3.9

Cement mortar 1:4 (1 cement : 4 coarse sand).

cum

3.80

3.10

Cement mortar 1:5 (1 cement : 5 coarse sand).

cum

3.10

3.11

Cement mortar 1:6 (1 cement : 6 coarse sand).

cum

2.50

3.12

Cement mortar 1:2 (1 cement : 2 stone dust).

cum

6.80

3.13

Cement mortar 1:2 (1 cement : 2 marble dust).

cum

6.80

3.14

Cement mortar 1:5 (1 cement : 5 marble dust).

3.15

White cement mortar 1:2 (1 white cement : 2 marble dust).

cum

6.80*

3.16

White cement mortar 1:3 (1 white cement : 3 marble dust).

cum

5.10*

3.17

White cement mortar 1:5 (1 white cement : 5 marble dust).

cum

3.10*

3.10

* denotes the White Cement.

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-3.0 MORTAR

401

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

4.0 CONCRETE WORK
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

cum

6.10

1:1:3 (1 Cement : 1 coarse sand : 3 graded stone

aggregate 20 mm nominal size)
cum

4.00

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.20

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone

aggregate 40 mm nominal size)

cum

3.20

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

2.20

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone

aggregate 40 mm nominal size)

cum

2.20

1:3:6 (1 Cement : 3 fine sand : 6 graded stone

aggregate 40 mm nominal size)

cum

2.20

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size)

cum

1.70

1:4:8 (1 cement : 4 fine sand : 8 graded stone

aggregate 40 mm nominal size)

cum

1.70

1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size)

cum

1.30

1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size)

cum

1.30

1:2:3:9 (1 ordinary portland cement : 2 Fly ash :

3 coarse sand : 9 graded stone aggregate 40 mm
nominal size)

cum

1.70

1:2:4:11 (1 ordinary portland cement : 2 fly

ash : 4 coarse sand : 11 graded stone aggregate
40 mm nominal size)

cum

1.30

1:1:2 (1 cement : 1 coarse sand : 2 graded stone

aggregate 20 mm nominal size)

cum

6.10

1:1:3 (1 cement:1 coarse sand:3 graded stone

aggregate 20 mm nominal size)

cum

4.00

CEMENT CONCRETE (CAST - IN- SITU)

4.1

P/L cement concrete - all works upto plinth level :

4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
4.1.6
4.1.7
4.1.8
4.1.9
4.1.10
4.1.11
4.1.12

4.1.13

4.2

P/L cement concrete in retaining walls, return walls etc.:

4.2.1
4.2.2

402

1:1:2 (1 Cement : 1 coarse sand : 2 graded stone

aggregate 20 mm nominal size)

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-4.0 CONCRETE WORK

Code
No.

Description

4.2.3
4.2.4
4.2.5
4.2.6
4.2.7
4.2.8
4.4

Unit

Quantity of cement
per unit quantity of
work (Quintals)

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.20

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 40 mm nominal size)

cum

3.20

1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

2.20

1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 40 mm nominal size)

cum

2.20

1:3:6 (1 cement : 3 fine sand : 6 graded stone

aggregate 40 mm nominal size)

cum

2.20

1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size)

cum

1.30

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.20

1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

2.20

1:1:3 (1 cement:1 coarse sand:3 graded stone

aggregate 20 mm nominal size)

cum

4.05

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.19

1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

2.19

cum

3.25

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.76

1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

2.76

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

2.099

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size)

cum

1.693

P/L cement concrete in kerbs, steps etc.:

4.4.1
4.4.2

CEMENT CONCRETE (PRE-CAST)

4.5

P/L precast cement concrete string or lacing courses,

copings etc.:
4.5.1
4.5.2
4.5.3

4.6

P/L precast cement concrete in kerbs, edgings etc.:

4.6.1

4.7

P/L precast cement concrete solid blocks:

4.7.1
4.7.2

4.8

1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

P/L precast cement concrete hollow blocks:

4.8.1
4.8.2

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-4.0 CONCRETE WORK

403

Code
No.
4.9

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

Precasting and placing in position 125 mm dia Bollards

600 mm high. each 0.097
DAMP- PROOF COURSE

4.10

P/L D.P.C. 40 mm thick with C.C. (1:2:4).

sqm

0.13

4.11

P/L D.P.C. 50 mm thick with C.C. (1:2:4).

sqm

0.16

sqm

0.11

MISCELLANEOUS
4.17

Making plinth protection 50 mm thick of cement concrete 1:3:6

4.19

P/L Ready mixed concrete using flyash:

4.20

404

4.19.1

All works upto plinth level

4.19.1.1

M-15 grade plain cement concrete

cum

2.40

4.19.1.2

M-10 grade plain cement concrete

cum

2.20

4.19.2

All works above plinth and upto floor V level

4.19.2.1

M-15 grade plain cement concrete

cum

2.40

4.19.2.2

M-10 grade plain cement concrete

cum

2.20

P/L ready mix plain cement concrete :

4.20.1

All works upto plinth level

4.20.1.1

M-15 grade plain cement concrete

cum

2.40

4.20.1.2

M-10 grade plain cement concrete

cum

2.20

4.20.2

All works above plinth and upto floor V level

4.20.2.1

M-15 grade plain cement concrete

cum

2.40

4.20.2.2

M-10 grade plain cement concrete

cum

2.20

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-4.0 CONCRETE WORK

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

5.0 REINFORCED CEMENT CONCRETE
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

1:1:2 (1 cement : 1 coarse sand : 2 graded stone

aggregate 20 mm nominal size)

cum

6.10

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone

aggregate 20 mm nominal size)

cum

4.00

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.20

1:1:2 (1 cement : 1 coarse sand : 2 graded stone

aggregate 20 mm nominal size)

cum

6.10

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone

aggregate 20 mm nominal size)

cum

4.00

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

cum

3.20

CAST-IN-SITU
5.1

P/L R.C.C. upto plinth level :

5.1.1
5.1.2
5.1.3

5.2

R.C.C work in walls etc.:

5.2.1
5.2.2
5.2.3

5.3

R.C.C. (1:2:4) work in beams etc.

cum

3.20

5.4

R.C.C. (1:2:4) work in kerbs, steps etc.

cum

3.20

5.5

R.C.C. (1:2:4) work in arches,domes etc.

cum

3.20

5.6

R.C.C. (1:2:4) work in chimneys & shafts.

cum

3.20

5.7

R.C.C. (1:2:4) work in well-steining.

cum

3.20

5.8

R.C.C. (1:1.5:3) work in vertical and horizontal fins individually

or forming box louvers, facias and eaves boards.

cum

4.00

P/F precast R.C.C. (1:2:4) work in string courses, bands,

copings, bed plates, anchor blocks, plain window sills etc.

cum

3.19

P/F precast R.C.C. (1:2:4) in small lintels not exceeding

1.5m clear span.

cum

3.16

P/F precast R.C.C. (1:2:4) in mouldings as in cornices,

windows sills etc.

cum

3.19

5.15

P/F precast R.C.C. (1:2:4) in lintels, beams and bressumers etc. cum

3.19

5.16

P/F precast R.C.C. (1:2:4) in shelves.

cum

3.80

5.17

P/F precast R.C.C. (1:2:4) in vertical & horizontal fins individually

or forming box louvers.
cum

4.36

PRE - CAST R.C.C.

5.12
5.13
5.14

5.18

Fixing precast cement concrete Jali (1:2:4).

5.18.1

50 mm thick

100 sqm

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-5.0 REINFORCED CONCRETE WORK

1.64*

405

Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

5.18.2

40 mm thick

100 sqm

1.64*

5.18.3

25 mm thick

100 sqm

1.64*

Encasing rolled steel sections, in beams and columns, with

cement concrete (1:2:4).

cum

3.20

Encasing rolled steel section in grillages with cement

concrete (1:2:4).

cum

3.20

100 sqm

3.67

* Cement for fixing only.

ENCASING ROLLED STEEL SECTION
5.19
5.20

MISCELLANEOUS
5.23
5.24

Smooth finishing of exposed surface of R.C.C. work with

6 mm thick cement mortar (1:3).
Rendering smooth the top of suspended floors, landings and
staircases with cement mortar (1:2). 100sqm 4.17

5.27

Providing and filling in position bitumen mix filler.

per cm depth
per cm width
per 100m

DESIGN MIX CONCRETE

5.33

P/L Design mix concrete (M-25).

5.34

Extra for providing richer mixes at all floor levels :

5.34.1
5.34.2
5.34.3

0.00032
3.30*

cum

Providing M-30 grade concrete instead of M-25 grade

B.M.C/ R.M.C.
cum

0.10*

Providing M-35 grade concrete instead of M-25 grade

B.M.C./ R.M.C.
cum

0.20*

Providing M-40 grade concrete instead of M-25 grade

B.M.C./ R.M.C.
cum

0.30*

5.36

P/F precast R.C.C. in waffle units.

cum

4.16*

5.37

P/L RMC manufactured in fully automatic batching plant

M-25 grade R.C.C.

cum

3.30*

5.40

P/L design mix cement concrete M-25 using Fly ash.

* Actual weight for design mix will be worked out taking into
consideration the cement requirement as per particular
mix design.

cum

3.30*

5:47:1

P/F factory made precast RCC M.40 doors & windows

Mtrs.

0.049

5:47:2

P/F factory made precast RCC M.40 doors & windows

Mtrs.

0.044

5:47:3

P/F factory made precast RCC M.40 doors & windows

Mtr.

0.041

5.48

Providing and laying RCC for construction of piers abutments

portal frames etc.

Cum

. 4.80

Constructing cost insitu RCC diaphram wall by providing ..

Cum.

4.14

5.49

406

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-5.0 REINFORCED CONCRETE WORK

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

6.0 BRICK WORK
Code
No.
6.1

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

Brick work in foundation & plinth with non modular bricks.

6.1.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

0.95 6.1.2

Cement mortar 1:6 (1 cement : 6 coarse sand)

cum
0.625

6.2

Brick work in foundation & plinth with modular bricks.

6.2.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

0.836 6.2.2

Cement mortar 1:6 (1 cement : 6 coarse sand)

cum
0.55

6.3

6.4

Brick work with machine moulded perforated bricks.

6.3.1

With non modular bricks.

cum

0.625

6.3.2

With modular bricks.

cum

0.55

Brick work in superstructure.

6.4.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

0.95 6.4.2

Cement mortar 1:6 (1 cement : 6 coarse sand)

cum
0.625

6.7

Half brick masonry in cement mortar (1:3) for closing cavity

5 to 7.5 cm wide in cavity wall.

6.8

Brick work 7 cm in cement mortar (1:3).

6.9&
6.10

Brick work in plain & gauged arches in cement mortar (1:3).

100 metre

3.86

100 sqm

9.23

cum

1.28

HALF BRICK MASONRY

6.12&
6.13

Half brick masonry in foundations & plinth and superstructure.

6.12.1
&
6.13.1

Cement mortar 1:3 (1 cement : 3 coarse sand)

100 sqm

14.28

6.12.2
&
6.13.2

Cement mortar 1:4 (1 cement : 4 coarse sand)

100 sqm

10.64

BRICK TILE WORK

6.16

ile brick masonry in foundation and plinth. :

6.16.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

1.52 6.16.2

Cement mortar 1:6 (1 cement : 6 coarse sand)

cum
1.00

6.17&
6.18
6.20 &

Tile brick masonry with m/c moulded tiles in cement mortar

1:6 (1 cement : 6 coarse sand).
Tile brick masonry with tile bricks in plain/gauged arches

cum

1.00

6.21

work in in cement mortar (1:4).

6.22

Tile brick masonry work 5 cm thick in cement mortar (1:3).

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-6.0 BRICK WORK

cum

1.33

100 sqm

7.65

407

Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

HONEY COMB WORK

6.23

Honey-comb brick work 10/11.4 cm thick in cement mortar 1:4. 100 sqm

6.56

EXPOSED BRICK WORK

6.26

Brick work with selected bricks in cement mortar (1:6).

cum

0.625

6.27

Brick work with modular bricks in cement mortar (1:6).

cum

0.55

6.28

Brick work with machine moulded modular bricks in cement

mortar (1:6).

cum

0.55

Brick work with m/c moulded F.P.S. bricks in cement

mortar (1:6).

cum

0.625

Brick work with machine moulded perforated F.P.S. bricks in

cement mortar (1:6).

cum

0.625

Brick work with machine moulded perforated modular bricks in

cement mortar (1:6).

cum

0.55

6.29
6.30
6.31
6.32

6.34

6.35

6.36

Brick work with clay flyash F.P.S. brick.

6.32.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

0.95

6.32.2

Cement mortar 1:6 (1 cement : 6 coarse sand)

cum

0.625

Brick work with non modular fly ash lime bricks (FALG Bricks) in :
6.34.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

0.95

6.34.2

Cement mortar 1:6 (1 cement : 6 Coarse sand)

cum

0.625

Brick work with modular calcium silicate bricks

machine moulded in :
6.35.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

cum

0.836

6.35.3

Cement mortar 1:6 (1 cement : 6 Coarse sand)

cum

0.55

Cement Mortar 1:4 ( 1 cement : 4 coarse sand)

cum

0.836

Brick work with modular extruded burnt fly ash clay sewer
bricks in cement mortar (1:3).

cum

1.275

Autoclaved aerated cement blocks masonry with 100mm

thick AAC blocks in cement mortar (1:4).

cum

0.57

Brick work with modular extruded burnt fly ash clay

sewer bricks in :
6.36.1

6.37
6.38
6.44

Brick edging 7 cm wide in cement mortar (1:4). 100 metre 0.137

6.45

Half brick masonry with non modular FALG bricks.

408

6.45.1

Cement mortar 1:3 (1 cement :3 coarse sand).

100 sqm

14.28

6.45.2

Cement mortar 1:4 (1 cement :4 coarse sand).

100 sqm

10.64

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-6.0 BRICK WORK

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

7.0 STONE WORK
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

cum

0.825

cum

0.750

cum

0.750

Stone work in plain ashlar in cement mortar (1:6) including

pointing with white cement mortar (1:2).

cum

0.54

7.13&
7.14

Stone work plain ashlar in arches/domes in cement mortar (1:3)

including pointing with white cement mortar (1:2).

cum

1.07

7.15

Stone work ashlar punched in cement mortar 1:6) including

pointing with white cement mortar (1:2).

cum

0.54

cum

0.54

RANDOM RUBBLE MASONRY

7.1&
7.2

Random rubble masonry with cement mortar (1:6).

COURSED RUBBLE MASONRY

7.6

Coursed rubble masonry (first sort) with :

7.6.1

7.7

Cement mortar 1:6 (1 cement : 6 coarse sand)

Coursed rubble masonry (second sort) with :

7.7.1

Cement mortar 1:6 (1 cement : 6 coarse sand)

ASHLAR MASONRY
7.12

SUNK, MOULDED, CARVED ASHLAR MASONRY

7.20

Stone work sunk and / or moulded including pointing with white

cement mortar (1:2).
MISCELLANEOUS STONE WORK

7.23

7.25

Stone work (machine cut edges) for wall lining etc. (veneer
work) in cement mortar (1:3) including pointing in white cement
mortar (1:2).
100 sqm

9.18 + 1.56*

P/F stainless steel cramps in stone wall lining in cement

mortar (1:2).

kg

0.07

7.26

P/F stone dowels 10x5x2.50 cm in cement mortar (1:2) .

each

0.007

7.27

P/F copper pins 7.5 cm long 6 mm diameter in stone wall

lining in cement mortar (1:2).

each

0.007

7.28
7.29

P/F sloping chajja of stone 40 mm thick and upto 80 cm wide in

cement mortar (1:4) i/c pointing in white cement mortar (1:2). 100 sqm
P/F horizontal chajja of stone 40 mm thick and upto 80 cm
projection in cement mortar (1:4) i/c pointing in white cement
mortar (1:2).

5.59
4.94 + 0.03*

100 sqm

7.30

P/F 30 mm red sand stone sun-shade with cement mortar 1:4

including finishing complete.
100 sqm

7.31

Providing and fixing red sand stone brackets 55x22.5x45cm.

100nos

2.19
3.02

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-7.0 STONE WORK

409

Code
No.

7.32

Description

Unit
Quantity of
cement per unit quantity
of
work (Quintals)

Stone work, plain in copings, cornices, string courses etc.

in Cement mortar 1:6 including pointing with white cement
mortar (1:2).
cum

7.36

7.37

7.38

Wall lining butch work with Dholpur stone 40 mm thick,

in cement mortar (1:3) including ruled pointing in cement
mortar (1:2).

100 sqm

Stone work ( machine cut edges) for wall lining with grout of
12 mm thick in cement mortar (1:3) and jointed with Cement
mortar (1:2).

100 sqm

Stone tile work for wall lining with 12 mm thick bed in cement
mortar (1:3).

sqm

0.54
15.50 +1.70*

13.744
10.44 + 1.70*

STONE WORK IN DRY CLADDING

7.41

P/F structural steel frame (for dry stone cladding) embedded

in brick wall with cement concrete block (1:2:4)

* White cement

1.05
100kg

410

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-7.0 STONE WORK

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

8.0 MARBLE & GRANITE WORK
Code
No.
8.1
8.2

8.4

8.7

8.9

Description

Unit

Marble work 18 mm thick for wall lining in cement mortar 1:3 100
including pointing with white cement mortar 1:2.
sqm
P/F 18mm thick gang saw cut mirror polished premoulded and
prepolished) machine cut for kitchen platforms, vanity counters
100 etc. laid over 20mm thick base cement mortar 1:4.
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm
with epoxy 100 resin based adhesive including cleaning etc.
complete.

Quantity of cement
per unit quantity of
work (Quintals)
8.67 + 1.70*

sqm

9.12

metre

1.27

P/F cramps in RCC/ CC backing with cement mortar 1:2 .

8.7.1

Gunmetal cramps

kg

0.0635

8.7.2

Stainless steel cramps

kg

0.0701

Stone tile work for wall lining over 12mm thick bed of cement
mortar (1:3) and cement slurry @ 3.3 kg/sqm including
pointing 100 in white cement complete.

8.11

P/F Machine cut Mirror/edge polished

8.12

P/L flamed finish granite stone flooring

* White cement

sqm

10.44 + 1.90*

100 Sqm.

8.16 + 3.30*

100 sqm.

13.50

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-8.0 MARBLE & GRANITE WORK

411

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

9.0 WOOD AND P.V.C. WORK
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

MISCELLANEOUS - WOOD WORK

9.32

P/F 50x50x50 mm 2nd class teak wood plugs in

cement mortar 1:3.

100 nos.

0.01

9.34
9.46

P/F 2nd class teak wood plain lining with wooden plugs.
P/F curtain rods of 1.25 mm thick chromium plated brass
brackets with wooden plugs, etc.

100 sqm

0.055

100 metre

0.01

9.47

Providing and fixing nickel plated M.S. pipe curtain

rods with nickel plated brackets.

100 metre

0.01

9.53

Providing 40x5 mm flat iron hold fast 40 cm long

with cement concrete block 30x10x15cm 1:3:6 mix.

100 nos

1.10

412

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-8.0 WOOD AND PVC WORK

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

10.0 MARBLE & GRANITE WORK
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

10.4

P/F 1 mm thick M.S. sheet sliding-shutters with frame.

100 sqm

0.35

10.5

P/F 1 mm thick M.S. sheet door with frame.

100 sqm

0.35

10.6

Supplying and fixing rolling shutters.

100 sqm

0.35

10.10.1 & Fixing standard steel glaze door windows etc.

10.11.1

100 kg

0.13

10.13.1

P/F T iron froms for doors windows & ventilators

100 kg

0.11

10.15

Providing and fixing M.S. Tubular frames for doors,

windows, ventilators and cupboard with 15x3 mm lugs
10 cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6 mix.

100 kg

0.28

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-10.0 STEEL WORK

413

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

11.0 FLOORING
Code
No.
11.1

11.3

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

Brick on edge flooring.

11.1.1

1:4 (1 cement : 4 coarse sand)

sqm

0.1850

11.1.2

1:6 (1cement : 6 coarse sand)

sqm

0.1285

40mm thick with 20mm nominal size stone aggregate sqm

0.17

Cement concrete flooring 1:2:4.

11.3.1

11.4

52 mm thick cement concrete flooring.

sqm

0.231

11.5

62 mm thick cement concrete flooring.

sqm

0.263

11.6

Cement plaster skirting with cement mortar (1:3).

sqm

0.14

11.7

Cement concrete pavement with C.C. (1:2:4).

cum

3.20

sqm

0.1695

Light shade pigment with white cement

0.129+0.0405*

TERRAZO FLOORING
11.9

40 mm thick marble chips flooring with under layer 34 mm

thick cement concrete (1:2:4).
11.9.1

Dark shade pigment with ordinary cement

11.9.2

sqm
11.9.3

11.10

Medium shade pigment with 50% white cement and

50% ordinary cement

0.1492+0.0202*
sqm

11.9.4 White cement without any pigment

sqm

0.129+0.0202*

11.9.5 Light shade pigment with ordinary cement

sqm

0.1695

11.9.6 Ordinary cement without any pigment

sqm

0.1695

sqm

0.1783

11.10.2

Light shade pigment with white cement

0.1205+0.0578*

11.10.3

sqm

40 mm thick marble chips flooring with under layer 31mm

thick cement concrete 1:2:4.
11.10.1

Dark shade pigment with Ordinary cement

Medium shade pigment with 50% white cement and

50% ordinary cement

0.1494+0.0289*
sqm

0.1205+0.0578*

11.10.5

White cement without any pigment

0.1783

11.10.6

sqm Light shade pigment with ordinary cement

0.1783

11.10.4

sqm
Ordinary cement without any pigment
11.11

sqm

40 mm thick marble chips flooring with under layer 28 mm thick

cement concrete 1:2:4.
11.11.

1
11.11.
2
11.11.

Dark shade pigment

with ordinary cement

11.11.4

sqm Light shade

pigment with white
cement

sqm
Medium shade
pigment with 50%
white cement
and 50% ordinary

414

cement

sqm

0.1907

White cement without any pigment

sqm

0.1097+0.081*
0.1502+0.0405*
0.1097+0.081*

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-11.0 FLOORING

Code
No.

Description

11.11.
5

Unit

Quantity of cement
per unit quantity of
work (Quintals)

Light shade pigment with ordinary cement

sqm

0.1097

Ordinary cement without any pigment

sqm

0.1097

11.11.
6
11.12

Marble chips skirting :

11.12.1

18 mm thick with under layer 12 mm thick in

cement plaster 1:3 (1 cement : 3 coarse sand) :

11.12.1.1 Dark shade pigment with ordinary cement

0.1292
sqm

0.0887+0.0405*

11.12.1.2

Light shade pigment with white cement

11.12.1.3

sqm

Medium shade pigment with 50% white cement

11.12.1.4 and 50% ordinary cement

sqm

0.1292

11.12.1.5

White cement without any pigment

0.1292

11.12.1.6

sqm Light shade pigment with ordinary cement

0.109+0.0203*
0.109+0.0405*

sqm
Ordinary cement without any pigment
11.15

sqm

Crazy marble stone flooring.

11.15.1

18 mm thick crazy marble stone white, black

or as specified
* White Cement

sqm

0.1200+0.0405*

sqm

0.0895+0.044*

TILE FLOORING
11.16

Precast terrazo tiles 22mm thick in floors, and landings

on 20mm thick bed of cement mortar (1:4).
11.16.1

Light shade using white cement

11.16.2

Medium shade using 50%white cement and

50% ordinary cement

11.18

11.16.3

Dark shade using ordinary cement

11.16.4

Ordinary cement without any pigment

sqm
0.0917+0.0220* sqm
0.0939
sqm

0.0939

sqm

0.0734+0.066*

Precast terrazo tiles 22 mm thick in skirting and

risers of steps.
11.18.1

Light shade using white cement.

11.18.2

Medium shades using 50% white cement and

50% ordinary cement.

11.18.3

Dark shade using ordinary cement

11.18.4

Ordinary cement without any pigment

sqm
0.1064+0.033* sqm
0.1394
sqm

11.19

0.1394

Chequered terrazo tiles 22 mm thick in floors on 20

mm thick bed of cement mortar (1:4).
11.19.1

11.19.2

11.19.3

11.19.4

Light shade using white cement

sqm

Medium shade using 50% white cement,

50% ordinary cement

sqm

Dark shade using ordinary cement

0.0917+0.024* sqm

Ordinary cement without any pigment

0.0939
sqm

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-11.0 FLOORING

0.0895+0.044*

0.0939

415

Code
No.
11.20

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

sqm

0.1291+0.066*

Chequerred precast cement concrete tiles 22 mm thick

in foot path on 20 mm thick bed of cement mortar (1:4).
11.20.1

Light shade using white cement

11.20.2

Medium shade using 50% white cement 50%

Grey cement

11.20.3

Dark shade using ordinary cement

11.20.4

Ordinary cement without any pigment

sqm
0.1621+0.033* sqm
0.1951
sqm

11.21

Providing and fixing 10mm thick acid and or alkali resistant tiles.
11.21.1

In flooring on a bed of 10 mm thick mortar 1:4

(1 acid proof cement : 4 coarse sand)

11.21.1.1 Acid and alkali resistant tile

11.21.2

11.22

0.1951

0.0786**
sqm

In dado/skirting on 12 mm thick mortar 1:4

(1 acid proof cement : 4 coarse sand)

0.0862**

11.21.2.1 Acid and alkali resistant tile

sqm

Tile work in skirting, risers of steps etc. with 8 mm thick

marble tile.

sqm

0.1044

STONE FLOORING
11.23

Marble stone flooring with 18 mm thick marble stone over

20 mm thick cement mortar (1:4).

0.13512
sqm

KOTA STONE FLOORING

11.26
11.27

Kota stone slab flooring over 20 mm thick bed of cement

mortar (1:4).

sqm

0.1491

Kota stone slabs 20 mm thick in risers of steps, skirting etc.

laid on 12 mm (average) thick cement mortar 1:3.

sqm

0.1374

SAND STONE FLOORING

11.28
11.29

40 mm thick fine dressed stone flooring over 20 mm (average)

thick base of cement mortar 1:5 with joints finished flush.
40 mm thick fine dressed stone flooring over 20 mm
(average) thick base of cement mortar 1:5 including pointing
with
cement mortar 1:2.

11.30
40 mm thick rubbed stone flooring over 20 mm (average)
thick base of cement mortar 1:5 with joints 3mm thick, side buttered
with cement mortar 1:2.

0.0775
sqm
0.0931
sqm
0.0931
sqm

CERAMIC GLAZED TILES

11.36
11.37

0.1242

P/F 1st quality ceramic glazed wall tiles over 12 mm thick

bed of cement Mortar (1:3).

sqm

P/L ceramic glazed floor tiles laid on 20 mm thick Cement

Mortar (1:4).

sqm

0.1242

416

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-11.0 FLOORING

Code
No.
11.38
11.39&
11.40

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

P/L ceramic glazed floor tiles laid on 20mm thick bed

of Cement Mortar (1:4).

sqm

0.1242

P/L rectified Glazed Ceramic floor tiles laid on 20mm thick

cement mortar (1:4).

sqm

0.1242

VITRIFIED FLOOR TILES

11.41

P/L vitrified floor tile laid on 20mm thick cement mortar (1:4).

sqm

0.1242

11.44

Crazy ceramic tile flooring.

sqm

0.0646

11.46

P/L vitrified tile in skirting in cement mortar (1:3).

sqm

0.088

11.51

P/L Machine cut, Mirror polished, Italian Marble stone flooring

Sqm.

0.085 + 0.05*

11.52

P/L Machine cut Mirror polished Marble stone flooring

Sqm.

0.085 + 0.05*

* White cement
** Acid alkali resistant cement.

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-11.0 FLOORING

417

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

12.0 ROOFING
Code
No.
12.16
12.17
12.19
12.20

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

10 cm thick mud phaska with flat tile bricks grouted with

cement mortar (1:3).

100 sqm

3.11

10cm thick mud phaska with machine moulded tile bricks

grouted with cement mortar (1:3).

100 sqm

3.11

Providing and laying brick tiles over mumty roofs grouted with
cement mortar (1:3).

100 sqm

9.13

Providing and laying pressed clay tiles on roofs jointed with

cement mortar (1:4).

100 sqm

9.92

12.21

Providing gola 75x75 mm in cement concrete (1:2:4).

metre

0.031

12.22

Making khurras 45x45 cm with average minimum thickness

of 5 cm cement concrete (1:2:4).

each

0.06

100 sqm

0.74

Providing and fixing M.S. holder bat clamps in cement concrete

blocks 10x10x10cm of 1:2:4 mix.

each

0.005

P/F heat resistant tile on roof with cement mortar (1:4) and
filling joints with white cement marble mix.

sqm

0.1367

12.23
12.38
12.55

Providing sand stone slab for roofing and laying cement

mortar (1 : 4).

* White cement

418

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-12.0 ROOFING

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

13.0 FINISHING
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

CEMENT PLASTER (IN FINE SAND)

13.1

13.2

13.3

12 mm cement plaster:
13.1.1

1:4 (1 cement : 4 fine sand)

100 sqm

5.47

13.1.2

1:6 (1 cement : 6 fine sand)

100 sqm

3.60

15 mm cement plaster:
13.2.1

1:4 (1 cement : 4 fine sand)

100 sqm

6.54

13.2.2

1:6 (1 cement : 6 fine sand)

100 sqm

4.30

20 mm cement plaster :
13.3.1

1:4 (1 cement : 4 fine sand)

100 sqm

8.51

13.3.2

1:6 (1 cement : 6 fine sand)

100 sqm

5.60

CEMENT PLASTER (IN COARSE SAND)

13.4

13.5

13.6

12 mm cement plaster :
13.4.1

1:4 (1 cement : 4 coarse sand)

100 sqm

5.47

13.4.2

1:6 (1 cement : 6 coarse sand)

100 sqm

3.60

15 mm cement plaster :
13.5.1

1:4 (1 cement : 4 coarse sand)

100 sqm

6.54

13.5.2

1:6 (1 cement : 6 coarse sand)

100 sqm

4.30

20 mm cement plaster :
13.6.1

1:4 (1 cement : 4 coarse sand)

100 sqm

8.51

13.6.2

1:6 (1 cement : 6 coarse sand)

100 sqm

5.60

CEMENT PLASTER WITH A FLOATING COAT OF

NEAT CEMENT
13.7

13.8

13.9

12 mm cement plaster finished with a floating coat

of neat cement :
13.7.1

1:3 (1 cement : 3 fine sand)

100 sqm

9.54

13.7.2

1:4 (1 cement : 4 fine sand)

100 sqm

7.67

15 mm cement plaster finished with a floating coat

of neat cement :
13.8.1

1:3 (1 cement : 3 fine sand)

100 sqm

10.97

13.8.2

1:4 (1 cement : 4 fine sand)

100 sqm

8.74

Cement plaster (1:3) finished with a floating coat

of neat cement.
13.9.1

12 mm Cement Plaster

100 sqm

9.54

13.9.2

20 mm Cement Plaster

100 sqm

13.62

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-13.0 FINISHING

419

Code
No.
13.10

Description

15 mm cement plaster (1:3) finished with a floating coat of

neat cement.

Unit

Quantity of cement
per unit quantity of
work (Quintals)
10.97

100 sqm

CEMENT PLASTER IN TWO COATS

13.11

18 mm cement plaster in two coats under layer 12 mm

thick cement plaster 1:5 finished with a top layer 6mm thick
cement plaster 1:6.

100

18 mm cement plaster in two coats under layer 12 mm

thick cement plaster 1:5 and a top layer 6mm thick cement
plaster (1:3).

100 sqm

13.13

12 mm cement plaster 1:2 (1 cement : 2 stone dust).

100 sqm

13.14

15 mm cement plaster 1:2 (1 cement : 2 stone dust).

100 sqm

13.15

20 mm cement plaster 1:2 (1 cement : 2 stone dust).

100 sqm

13.12

sqm 6.26

8.13
9.79
11.70
15.23

6 MM CEMENT PLASTER
13.16

6 mm cement plaster of mix :

13.16.1

1:3 (1 cement : 3 fine sand)

13.17

6 mm cement plaster (1:3) finished with a floating coat

of neat cement.

13.18

Neat cement punning

100 sqm

3.67

100 sqm

5.87

100 sqm

2.20

100 sqm

11.59

100 sqm

11.59

ROUGH CAST PLASTER

13.19

Rough cast plaster in two layers, under layer 12 mm

cement plaster (1:4) and top layer 10mm cement
plaster (1:3).
PEBBLE DASH PLASTER

13.20

Pebble dash plaster in two layers, under layer 12mm

cement plaster 1:4 and top layer 10mm cement plaster with
cement mortar (1:3).
PLAIN CEMENT MORTAR BANDS

100

13.28

12 mm thick plain cement mortar bands in cement

mortar (1:4) : (Flush /Sunk / Raised / Moulded Band).

13.29

18 mm thick plain cement mortar band in cement mortar (1:4). 100 metre
1cm wide

13.30

18 mm thick moulded cement mortar band in two coats

under layer 12mm thick with cement mortar 1:5, top layer
6mm thick with cement mortar (1:4).

metre
1cm wide
0.053

0.076

100
metre
1cm wide

0.07

POINTING OF BRICK WORK

13.31

Pointing on brick work with cement mortar (1:3) :

13.31.1

Flush / Ruled/ Struck or weathered pointing

100 sqm

1.53

13.31.2

Raised and cut pointing

100 sqm

2.04

420

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-13.0 FINISHING

Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

POINTING ON TILE BRICK WORK

13.32

Pointing on tile brick work with cement mortar (1:3).

13.32.1

Flush/ Ruled/ Struck or weathered pointing

100 sqm

2.35

POINTING ON STONE WORK

13.33

Pointing on stone work with cement mortar (1:3).

13.33.1

Flush/ Ruled pointing

100 sqm

1.17

13.33.2

Raised and cut pointing

100 sqm

2.35

Raised and cut pointing on stone work in white cement

mortar (1:3).

00 sqm

2.35*

13.35

Pointing on stone slab ceiling with cement mortar (1:2).

100 sqm

1.02

13.72

Washed stone grit plaster on exterior walls in two

layers, under layer 12mm cement plaster (1:4), top layer
15mm
cement plaster 1:1/2:2.

100 sqm

17.472

13.34

Note: - cement consumption for pointing is same for

modular & non modular bricks.
* White cement

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-13.0 FINISHING

421

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

14.0 REPAIR TO BUILDING
Code
No.
14.1
14.2

14.12

Description

Repairs to plaster of thickness 12 mm to 20 mm in patches

with cement mortar 1:4.

Unit

Quantity of cement
per unit quantity of
work (Quintals)

100 sqm

6.95

Fixing chowkhats in existing opening with hold fasts

in cement concrete blocks with cement concrete
1:3:6.
14.2.1

Door chowkhats

each

0.12

14.2.2

Window chowkhats

each

0.06

14.2.3

Clerestory window chowkhats

each

0.03

each

0.016

Providing and fixing 16 mm M.S. Fan clamps in existing

R.C.C. slab.

14.13

Regrading terracing of mud phaska to proper slope.

100 sqm

3.11

14.14

Replacing sand stone slabs in roofing in cement mortar 1:4.

100 sqm

0.78

14.15

Renewing wooden battens in roofs & making good the holes

in walls.

cum

0.36

Renewing wooden beams in roofs & making good the holes

in walls.

cum

0.13

100 sqm

0.76

14.16
14.18

Flush pointing with cement mortar 1:3 for flat tile bricks on
top of mud phaska.

422

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-14.0 REPAIR TO BUILDING

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

16.0 ROAD WORK
Code
No.

Description

Unit
Quantity of
cement per unit quantity of
work (Quintals)

FENCING
16.23
16.24

P/F boundary stone including finishing smooth with cement

mortar (1:3).

each

0.082

P/F precast R.C.C. kilometre stone including finishing

smooth in cement mortar (1:3).
16.24.1

35x111x25 cm size

16.24.2

50x152.5x25 cm size

16.24.3

35x93.5x18 cm size

CONCRETE PAVEMENT
16.42

Cement concrete (1:2:4) in pavements.

16.43

Providing and laying design mix cement concrete of M-30

grade, in roads/ taxi tracks/ runways, using cement content
as per design mix.

each
0.37 each
0.698
each

0.23

cum

3.20

cum

3.40

10 nos

6.60

sqm

0.05

metre

0.11

100 sqm

7.75

cum

0.05

cum
cum

3.30
1.50
100 metre
0.3723 Sqm.
0.09 Sqm.
0.09 Sqm.
0.12 Sqm.
0.12 Sqm.
0.12 Sqm.
1.85

MISCELLANEOUS
16.49
16.52

16.63
16.67

16.69
16.75
16.80
16.85
16.86
16.87
16.88
16.89
16.90
16.92
16.93

Making bell mouth opening including providing cement

concrete (1:3:6) & plastering with cement mortar (1:3).
Providing and fixing precast lime fly ash concrete blocks
including finishing with 10mm thick cement mortar (1:3), in
foot paths.
P/L kerb channel 30cm wide and 50mm thick of cement
concrete (1:3:6).
Providing and fixing factory made RCC pavement slab of M30 grade in footpath over a bed of 20mm average thick
cement mortar (1:5).
Providing and laying factory made kerb stone of M-25
grade jointed with cement mortar (1:3).
Providing and laying C.C. pavement of mix M-25 with
ready mixed concrete.
Dry lean cement concrete sub base.
Laying old kerb stones, jointed with cement mortar (1:3).
P/L gang saw cut 18 mm thick, morror polished
P/L gang saw cut 30 mm thick mirror polished
P/L Matt finished vitrified tile of size
P/L Matt finished vitrifid tile of size
P/L tactile tile
P/F 10x10x7.5 cm. granite stone block
Providing and Placing in position 100mm thick precast
RCC covers on drain of footpath

Sqm.

0.352

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-16.0 ROAD WORK

423

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

17.0 SANITARY INSTALLATIONS
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

each

0.05

One urinal basin with 5 litre white P.V.C. automatic

flushing cistern

each

0.025

Range of two urinal basins with 5 litre white P.V.C.

automatic flushing cistern

each

0.04

Range of three urinal basins with 10litre white P.V.C.

automatic flushing cistern

each

0.067

Range of four urinal basins with 10 litre white P.V.C.

automatic flushing cistern

each

0.095

Single half stall urinal with 5 litre P.V.C. automatic

flushing cistern

each

0.051

Range of two half stall urinals with 5 litre P.V.C.

automatic flushing cistern

each

0.102

Range of three half stall urinals with 10 litre P.V.C.

automatic flushing cistern

each

0.153

Range of four half stall urinals with 10 litre P.V.C.

automatic flushing cistern

each

0.203

17.1/17.2/ Fixing Indian type W.C. pan.

17.3
17.4

Fixing white vitreous china urinal basin :

17.4.1
17.4.2
17.4.3
17.4.4

17.5

Fixing white vitreous china flat back half stall urinal :

17.5.1
17.5.2
17.5.3
17.5.4

17.6

Fixing one piece construction white vitreous china squatting plate :

17.6.1
17.6.2
17.6.3
17.6.4

Single squatting plate with 5 litre P.V.C. automatic

flushing cistern

each

0.051

Range of two squatting plates with 5 litre P.V.C.

automatic flushing cistern

each

0.102

Range of three squatting plates with 10 litre P.V.C.

automatic flushing cistern

each

0.153

Range of four squatting plates with 10 litre P.V.C.

automatic flushing cistern

each

0.203

17.7

Fixing wash basin with C.I. brackets. each 0.025

17.8

Fixing white vitreous china pedestal for wash basin.

each

0.016*

17.9/
17.10/
17.11

Fixing kitchen sink with C.I. brackets.

each

0.025

17.12

Fixing draining board with C.I. brackets.

each

0.014

424

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-17.0 SANITARY INSTALLATIONS

Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

17.13

Fixing White vitreous china water closet squatting pan.

each

0.025

17.17

Fixing a pair of white vitreous china foot rests.

each

0.025

17.23

Fixing white vitreous china flat urinal basin.

each

0.01

17.24

Fixing white vitreous china squatting plate urinal.

each

0.02

17.25

Fixing white vitreous china wash basin.

each

0.015

17.26/
17.27

Fixing kitchen sink.

each

0.015

17.37

Providing and fixing M.S. holder-bat clamps.

each

0.005

17.59

Providing and fixing M.S. stays and clamps.

each

0.005

17.60

Providing and fixing trap of self-cleansing design.

each

0.025

17.61

Cutting chases in brick masonry walls for sand cast

iron/ centrifugally cast (spun) iron pipes and making
good the same with C.C.(1:3:6).
17.61.1

100 mm dia

100 metre

5.40

17.61.2

75 mm dia

100 metre

3.70

17.61.3

50 mm dia

100 metre

1.87

* White Cement.

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-17.0 SANITARY INSTALLATIONS

425

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

18.0 WATER SUPPLY
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

18.1/18.4/ Providing and fixing G.I./ PE-AL-PE/ PP-R pipes.

18.7/18.10 Internal work - Exposed on wall
18.10.1

15 mm dia nominal bore

100 metre

0.05

18.10.2

20 mm dia nominal bore

100 metre

0.06

18.10.3

25 mm dia nominal bore

100 metre

0.07

18.10.4

32 mm dia nominal bore

100 metre

0.075

18.10.5

40 mm dia nominal bore

100 metre

0.08

18.10.6

50 mm dia nominal bore

100 metre

0.08

100 metre

0.88

Constructing masonry Chamber 30x30x50 cm, for

stop cock.

each

0.26

Constructing masonry Chamber 60x60x75 cm, for

sluice valve.

each

1.44

Constructing masonry Chamber 90x90x100 cm, for

sluice valve.

each

2.48

Constructing masonry Chamber 120x120x100 cm, for

sluice valve.

each

3.50

Constructing masonry Chamber 60x60x75 cm, for fire

hydrants.

each

1.30

Constructing masonry Chamber 60x45x50 cm, for

water meter.

each

1.34

Cutting holes up to 30x30 cm in walls including making

good the same.

100 nos.

2.92

Cutting holes up to 15x15 cm in R.C.C. floors and roofs

and repairing the hole after insertion of drain pipes etc.
with cement concrete (1:2:4).

100 nos.

0.70

18.2/18.5/ P/F concealed pipes.

18.8/18.11
18.32
18.33
18.34
18.35
18.36
18.37
18.76
18.77

18.78

Making chases up to 7.5x7.5 cm in walls i/c finishing.

100 metre

0.88

18.79

Making hole up to 20x20 cm and embedding pipes up to

150 mm diameter in masonry and filling with cement
concrete (1:3:6).

100 metre

4.90

426

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-18.0 WATER SUPPLY

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

18.0 WATER SUPPLY
Code
No.
19.1

19.2

19.3

Description

Unit

Jointing glazed stoneware pipes with stiff mixture of

cement mortar in the proportion of (1:1).
19.1.1

100 mm diameter

100 metre

2.17

19.1.2

150 mm diameter

100 metre

3.23

19.1.3

200 mm diameter

100 metre

4.33

19.1.5

250 mm diameter

100 metre

5.40

19.1.6

300 mm diameter

100 metre

6.47

Laying cement concrete (1:5:10) alround S.W. pipes:

19.2.1

100 mm diameter S.W. pipe

100 metre

19.24

19.2.2

150 mm diameter S.W. pipe

100 metre

23.53

19.2.3

200 mm diameter S.W. pipe

100 metre

27.43

19.2.5

250 mm diameter S.W. pipe

100 metre

31.72

9.14

Laying cement concrete (1:5:10) upto haunches of

S.W. pipes:
19.3.1

100 mm diameter S.W. pipe

100 metre

19.3.2

150 mm diameter S.W. pipe

100

19.3.3

200 mm diameter S.W. pipe

14.82

100

metre

19.3.5

250 mm diameter S.W. pipe

17.42

100

metre

19.3.6

300 mm diameter S.W. pipe

20.28
100 metre

19.4

19.6 P/L

Quantity of cement
per unit quantity of
work (Quintals)

metre

23.40

Providing and fixing square-mouth S.W. gully trap :

19.4.1

100x100 mm size P type

19.4.2

150 x 100 mm size P type.

19.4.3

180x150 mm size P type

each
0.27 each
0.26
each

0.25

NP2 class R.C.C. pipes with collars jointed with

stiff mixture of cement mortar in the proportion of (1:2):
19.6.1

100 mm dia. R.C.C. pipe

100 metre

0.50

19.6.2

150 mm dia. R.C.C. pipe

100 metre

0.60

19.6.3

250 mm dia. R.C.C. pipe

100 metre

0.90

19.6.4

300 mm dia. R.C.C. pipe

100 metre

1.10

19.6.5

450 mm dia. R.C.C. pipe

100 metre

2.40

19.6.6

500 mm dia. R.C.C. pipe

100 metre

2.60

19.6.7

600 mm dia. R.C.C. pipe

100 metre

3.20

19.6.8

700 mm dia. R.C.C. pipe

100 metre

3.70

19.6.9

800 mm dia. R.C.C. pipe

100 metre

4.20

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-19.0 DRAINAGE

427

Code
No.

19.7

19.8

19.9

Description

19.11

900 mm dia. R.C.C. pipe

100 metre

4.90

19.6.11

1000 mm dia. R.C.C. pipe

100 metre

5.50

19.6.12

1100 mm dia. R.C.C. pipe

100 metre

6.10

19.6.13

1200 mm dia. R.C.C. pipe

100 metre

6.80

each

2.92

each

4.73

Constructing brick masonry manhole in cement mortar (1:4).

19.7.1

Inside size 90x80 cm and 45 cm deep

19.7.2&
19.7.3

Inside size 120x90 cm and 90 cm.deep

Extra for depth for manholes

19.8.1

Size 90x80 cm

metre

1.26

19.8.2

Size 120x90 cm

metre

1.52

each

2.75

metre

1.40

each

5.39

metre

1.43

each

10.86

metre

3.11

Constructing brick masonry circular type manhole 0.91

m internal dia at bottom and 0.56m dia at top in cement
mortar (1:4).

19.13

0.91 m deep

Extra depth for circular type manhole 0.91m internal dia

(at bottom) with beyond 0.91m to 1.67m
Constructing brick masonry circular manhole 1.22m
internal dia at bottom and 0.56m dia at top in cement
mortar (1:4).
19.11.1

19.12

Quantity of cement
per unit quantity of
work (Quintals)

19.6.10

19.9.1
19.10

Unit

1.68 m deep

Extra depth for circular type manhole 1.22m internal dia

(at bottom) beyond 1.68 m to 2.29 m.
Constructing brick masonry circular manhole 1.52 m
internal dia at bottom and 0.56 m dia at top in cement mortar
(1:4).
19.13.1

2.30 m deep

19.14

Extra depth for circular type manhole 1.52 m internal

dia (at bottom) beyond 2.30 m.

19.15

Providing M.S. foot rests including fixing in manholes

with 20x20x10 cm cement concrete blocks (1:3:6).

19.16

Providing orange colour safety foot rest.

19.17

Replacement of M.S. foot rests in manholes with

20x10x10 cm C.C. blocks (1:3:6) mix.

19.19

Providing and fixing in position precast R.C.C.

manhole cover and frame.

100 nos.
0.88 100 nos
1.98
100 nos

0.88

19.19.1.1 Rectangular shape 600x450mm internal dimensions

each

0.128

19.19.1.2 Square shape 450mm internal dimensions

each

0.096

19.19.1.3 Circular shape 450mm internal diameter

each

0.096

19.19.1 L D- 2.5

428

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-19.0 DRAINAGE

Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

19.19.2.1 Square shape 450mm internal dimension

each

0.128

19.19.2.2 Circular shape 500mm internal diameter

each

0.096

each

0.096

each

0.096

19.19.2

19.19.3

M D - 10

H D - 20

19.19.3.1 Circular shape 560 mm internal diameter

19.19.4

EHD - 35

19.19.4.1 Circular shape 560 mm internal dia

19.21

19.22

19.23

19.27
19.28
19.29
19.30

Making connection of drain or sewer line with existing

manhole and making good the walls, floors with C.C.
(1:2:4) mix.
19.21.1

For pipes 100 to 250 mm diameter

each

19.21.2

For pipes 250 to 300 mm diameter

0.056 each

19.21.3

For pipes 350 to 450 mm diameter

0.095
0.153

Providing sand cast iron drop connection externally for

60 cm drop from branch sewer line to main sewer manhole. :
19.22.1

100 mm dia sand cast iron drop connection

each

0.34

19.22.2

150 mm dia sand cast iron drop connection

each

0.46

Extra for depths beyond 60 cm of sand cast iron

drop connection. :
19.23.1

For 100 mm dia. sand cast iron drop connection

metre

0.21

19.23.2

For 150 mm dia. sand cast iron drop connection

metre

0.26

Constructing brick masonry road gully chamber 50x45x

60cm in cement mortar (1:4).

each

0.93

Constructing brick masonry road gully chamber 45x45x

77.5 cm in cement mortar (1:4).

each

0.82

Constructing brick masonry road gully chamber 110x50x

77.5 cm in cement mortar (1:4).

each

1.66

Inside dimensions 455x610 mm and 45 cm deep

for single pipe line

each

0.90

Inside dimensions 500x700 mm and 45 cm

deep for pipe line with one or two inlets

each

1.02

Inside dimensions 600x 850 mm and 45 cm deep

for pipe line with three or more inlets

each

1.27

Constructing brick masonry chamber for underground

C.I. inspection chamber and bends in cement mortar (1:4).
19.30.1
19.30.2
19.30.3

19.31

each

Extra for depth beyond 45 cm of brick masonry chamber :

19.31.1

For 455x610 mm size

metre

0.87

19.31.2

For 500x700 mm size

metre

0.95

19.31.3

For 600x850 mm size

metre

1.12

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-19.0 DRAINAGE

429

Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

each

0.072

19.34.1 100 mm dia

each

0.013

19.34.2 150 mm dia

each

0.019

19.32

Making soak pit 2.5 m diameter 3.0 metre deep.

19.34

Providing and fixing S.W. intercepting trap in

manholes with stiff mixture of cement mortar (1:1).

19.35

19:36

P/L Non pressure Np-3 class

19:35:1

a) 450 mm dia RCC pipe

100 Mtrs.

1.20

19:35:2

a) 600 mm dia R.C.C. pipe

100 mtrs.

1.60

19:35:3

a) 900 mm dia R.C.C. pipe

100 mtrs.

2.50

19:35:4

a) 1000 mm dia RCC pipe

100 mtrs.

2.80

19:35:5

a) 1200 mm dia RCC pipe

100 mtrs.

3.40

19:35:6

a) 1800 mm dia RCC pipe

100 mtrs.

4.90

P/L Non pressure Np-4 class

19:36:1

450 mm dia RCC pipes

100 mtrs.

1.20

19:36:2

600 mm dia RCC pipes

100 mtrs.

1.60

19:36:3

900 mm dia RCC pipes

100 mtrs.

2.50

19:36:4

1000 mm dia RCC pipes

100 mtrs.

2.80

19:36:5

1200 mm dia RCC pipes

100 mtrs.

3.40

19:36:6

1800 mm dia RCC pipes

100 mtrs.

4.90

430

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-19.0 DRAINAGE

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

20.0 PILE WORK
Code
No.
20.1

20.2

20.2A

20.3

Description

Providing, driving and installing driven cast-in-situ

reinforced cement concrete piles of grade M -25.

Unit
Quantity of
cement per unit quantity
of
work (Quintals)

20.1.1

400 mm dia piles

metre

0.414

20.1.2

450 mm dia piles

metre

0.525

20.1.3

500 mm dia piles

metre

0.648

20.1.4

550 mm dia piles

metre

0.784

20.1.5

750 mm dia piles.

metre

1.456

20.1.6

1000 mm dia piles

metre

2.590

20.1.7

1200 mm dia piles

metre

3.729

20.1.8

1500 mm dia piles

metre

5.83

Boring, providing and installing bored cast-in-situ reinforced

cement concrete piles of grade M -25 by tripod and
mechanical winch machine.
20.2.3

450 mm dia piles

metre

0.525

20.2.4

500 mm dia. piles

metre

0.648

20.2.5

600 mm dia piles

metre

0.932

20.2.6

750 mm dia piles.

metre

1.456

Boring, providing and installing bored cast-in-situ

reinforced cement concrete piles of grade M -25 by
crawler mounted,
telescopic boom hydraulic pilling Rig.

metre

1.456

20.2A.1

600 mm dia piles

metre

0.932

20.2A.2

750 mm dia piles

metre

1.456

20.2A.3

1000 mm dia piles

metre

2.590

20.2A.4

1200 mm dia piles

metre

3.729

20.2A.5

1500 mm dia pile

metre

5.830

Boring, Providing and installing cast in situ single under

reamed piles of grade M -25.
20.3.1

300 mm dia piles

metre

0.257

20.3.2

400 mm dia piles

metre

0.488

20.3.3

450 mm dia piles

metre

0.629

20.3.4

550 mm dia piles

metre

0.792

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-20.0 PILE WORK

431

20.4

20.5

432

Extra for providing additional bulb in under reamed piles.

20.4.1

300 mm dia piles

each

0.109

20.4.2

400 mm dia piles

each

0.208

20.4.3

450 mm dia piles

each

0.267

20.4.4

550 mm dia piles

each

0.396

Providing, driving and installing driven Pre-cast

reinforced cement concrete piles of grade M -25.
20.5.1

400 mm dia piles

metre

0.414

20.5.2

450 mm dia piles

metre

0.525

20.5.3

500 mm dia piles

metre

0.648

20.5.4

550 mm dia piles

metre

0.784

20.5.5

750 mm dia piles

metre

1.795

20.5.6

1000 mm dia piles

metre

2.590

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-20.0 PILE WORK

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

22.0 WATER PROOFING
Code
No.
22.1

Description

Using rough kota stone

sqm

0.342

sqm

0.443

P/L integral cement based treatment for water proofing

on the vertical surface. :
22.2.1

22.3

Quantity of cement
per unit quantity of
work (Quintals)

P/L integral cement based treatment for water proofing

on horizontal surface. :
22.1.1

22.2

Unit

Using rough Kota stone

P/L water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C., kitchen and the like
consisting of:
i)

Ist course of applying cement slurry @ 4.4 kg/sqm

ii)

IInd course of 20mm cement plaster (1:3)

iii)

IIIrd course of applying blown or residual bitumen applied

hot at 1.7 Kg. per sqm of area

iv)

IVth course of 400 micron thick PVC sheet

sqm

0.158

P/L water proofing treatment in sunken portion of WCs,

bathroom etc.

sqm

0.0123

22.6

P/L water proofing treatment on roofs.

sqm

0.0195

22.7

P/L integral cement based water proofing treatment

on roofs, balconies, terraces etc. :

22.5

22.7.1

22.14

With average thickness of 120mm and

minimum thickness at khurra as 65 mm sqm
0.387

Grading roof for water proofing treatment with

22.14.1

Cement concrete 1:2:4

cum

3.20

22.14.2

Cement mortar 1:3

cum

5.10

22.14.3

Cement mortar 1:4

cum

3.80

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-22.0 WATER PROOFING

433

1.0 COEFFICIENTS FOR CEMENT CONSUMPTION

23.0 HORTICULTURE & LANDSCAPING
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

23.30

Providing circular cement concrete pots.

100 nos

4.00

23.31

Providing square cement concrete pots.

100 nos

2.30

434

COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-23.0 HORTICULTURE & LANDSCAPING

COEFFICIENT
S FOR
BITUMEN
CONSUMPTIO
N

435

436

2.0 COEFFICIENTS FOR BITUMEN CONSUMPTION

16.0 ROAD WORK
Code
No.

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

Surface dressing on new surface with paving

bitumen of grade VG -10.

sqm

0.0225

Surface dressing on new surface in two coats with

bitumen of grade VG -10.

sqm

0.029

Surface dressing on old surface with hot bitumen of

grade VG -10.

sqm

0.0195

sqm

0.0195

sqm

0.0122

SURFACE DRESSING
16.25
16.26
16.27
16.28

Surface dressing one coat on new surface :

16.28.1

16.29

Using bitumen emulsion

Surface dressing one coat on old surface :

16.29.1

Using bitumen emulsion

PREMIX CARPET
16.30

16.31

16.32
16.33

Providing and applying tack coat with bitumen of grade

VG-10 :
16.30.1

On W.B.M. @ 0.75 Kg / sqm

sqm

0.0075

16.30.2

On bituminous surface @ 0.50 Kg / sqm

sqm

0.0050

Providing and applying tack coat using bitumen

emulsion (Rapid Setting):
16.31.1

On W.B.M @ 0.4kg/sqm

sqm

0.0040

16.31.2

On bituminous surface @ 0.25kg/sqm

sqm

0.0025

2 cm premix carpet surfacing with paving asphalt

VG-10/VG-30/modified bitumen CRMB 55.

sqm

2.5 cm premix carpet surfacing with paving asphalt

VG-10/VG-30/modified bitumen CRMB 55.

sqm

0.033*

2 cm premix carpet surfacing with bitumen emulsion.

0.0388*

16.34
sqm 16.35

0.0144
0.018

2.5 cm premix carpet surfacing with bitumen emulsion.

sqm

16.36

Providing and laying Bitumen Penetration Macadam :

16.36.
16.36.2

For 50mm compacted thickness with paving

asphalt VG-10 @ 50 kg/10 sqm

sqm

0.05

For 75 mm compacted thickness in two layers

with paving asphalt VG-10 @ 68 kg/10 sqm

sqm

0.068

MASTIC AND BITUMASTIC WEARING COURSE

16.37

Providing and laying bitumen mastic wearing course:

16.37.1

5 mm thick

sqm

0.0586

16.37.2

40 mm thick

sqm

0.0938

COEFFICIENTS FOR BITUMEN CONSUMPTION S.H.-16.0 ROAD WORK

437

Code
No.
16.38

16.39

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

sqm

0.0303

sqm

0.0479

sqm

0.0077

sqm

0.0098

50 to 100 mm average compacted thickness with

bitumen of grade VG-30 @ 5% (percentage by
weight of total mix) and lime filler @ 2%
(percentage by weight of Aggregate) prepared in
Batch Type Hot Mix
Plant of 100-120 TPH capacity.

cum

1.5438

50 to 100 mm average compacted thickness with

bitumen of grade VG-30 @ 5% (percentage by
weight of total mix) and lime filler @ 2%
(percentage by weight of Aggregate) prepared in
Drum Type Hot Mix
Plant of 60-90 TPH capacity.

cum

1.5438

50 to 100 mm average compacted thickness with

bitumen of grade VG-30 @ 3.50% (percentage by
weight of total mix) prepared in Batch Type Hot Mix
Plant of 100-120 TPH capacity.

cum

0.7683

50 to 100 mm average compacted thickness with

bitumen of grade VG-30 @ 3.50% (percentage by
weight of total mix) prepared in Drum Type Hot Mix
Plant of 60-90 TPH capacity.

cum

0.7683

2.5 cm thick bitumastic sheet with hot bitumen,

paving asphalt VG-10/VG-30/modified bitumen CRMB
55.
4 cm thick bitumastic sheet with hot bitumen,
paving asphalt VG-10/VG-30/modified bitumen
CRMB 55.
SEAL COAT

16.40

P/L seal coat using 128 kg of bitumen of grade VG-10.

16.41

P/L seal coat using 98 kg of bitumen of grade VG-10.

16.54

P/L Dense Bituminous macadam :

16.54.1

16.54.2

16.55

Providing and laying Bituminous Macadam.

16.55.1

16.55.2

16.56

Providing and laying Semi Dense Bituminous concrete

16.56.1

16.56.2

16.57

25 mm compacted thickness with bitumen of grade

VG-30 @ 5% (percentage by weight of total mix)
and lime filler @ 2% (percentage by weight of
Aggregate) prepared in Batch Type Hot Mix Plant of
100-120 TPH
capacity.
100 sqm

2.884

25 mm compacted thickness with bitumen of grade

VG-30 @ 5% (percentage by weight of total mix)
and lime filler @ 2% (percentage by weight of
Aggregate) prepared in Drum Type Hot Mix Plant of
60-90 TPH
capacity.
100 sqm

2.884

P/L Bituminous Concrete :

16.57.1

40/50 mm compacted thickness with bitumen of

grade VG-30 @ 5.5% (percentage by weight of total
mix) and lime filler @ 3% (percentage by weight of

Aggregate) prepared in Batch Type Hot Mix Plant of

100- 120 TPH capacity.

438

cum

1.296

COEFFICIENTS FOR BITUMEN CONSUMPTION S.H.-16.0 ROAD WORK

Code
No.

Description

16.57.2

16.57.3

16.57.4

16.57.5

16.57.6

16.57.7

16.57.8

Unit

Quantity of cement
per unit quantity of
work (Quintals)

40/50 mm compacted thickness with bitumen of

grade VG-30 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) and waste plastic
additive @ 8% (percentage by weight of bitumen)
prepared in Batch
Type Hot Mix Plant of 100-120 TPH capacity.

cum

1.296

40/50 mm compacted thickness with bitumen of

grade PMB-40 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) prepared in Batch Type Hot
Mix Plant of
100-120 TPH capacity.

cum

1.296

40/50 mm compacted thickness with bitumen of

grade CRMB-60 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) prepared in Batch Type Hot
Mix Plant
of 100-120 TPH capacity.

cum

1.296

40/50 mm compacted thickness with bitumen of

grade VG-30 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) prepared in drum Type Hot
Mix Plant of
60-90 TPH capacity.

cum

1.296

40/50 mm compacted thickness with bitumen of

grade VG-30 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) and waste plastic additive @
8% (percen-tage by weight of bitumen) prepared in
drum Type
Hot Mix Plant of 60-90 TPH capacity.

cum

1.296

40/50 mm compacted thickness with bitumen of

grade PMB-40 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) prepared in drum Type Hot
Mix Plant of
60-90 TPH capacity.

cum

1.296

40/50 mm compacted thickness with bitumen of

grade CRMB-60 @ 5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by
weight of Aggregate) prepared in Drum Type Hot
Mix Plant
of 60-90 TPH capacity.

cum

1.296

* Including tack coat

COEFFICIENTS FOR BITUMEN CONSUMPTION S.H.-16.0 ROAD WORK

439

2.0 COEFFICIENTS FOR BITUMEN CONSUMPTION

22.0 WATER PROOFING
Code
No.
22.3
22.6
22.8

Description

Unit

Quantity of cement
per unit quantity of
work (Quintals)

P/L water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C., kitchen and the like.

sqm

0.017

P/L water proofing treatment on roofs with cement slurry

& fibre glass cloth.

sqm

0.01

sqm

0.029

sqm

0.041

sqm

0.0435

P/L in situ seven course water proofing treatment with

APP (1.5 mm thick @ 2.25 kg./sqm).

sqm

0.036

P/L in situ five course water proofing treatment with

APP (2.00 mm thick @ 3.00 kg./sqm).

sqm

0.024

P/L in situ seven course water proofing treatment with

APP (2.00 mm thick @ 3.00 kg./sqm).

sqm

0.036

sqm

0.036

sqm

0.024

sqm

0.036

P/L four courses water proofing treatment with

bitumen felt over roofs:
22.8.1

22.9

Bitumen felt (hessian base)type 3 grade I

P/L six courses water proofing treatment with bitumen felt

over roofs applied hot @ 1.45, 1.20 & 1.45 for 1st, 3rd and
5th course.

22.10&
P/L six courses water proofing treatment with bitumen felt
22.11
over roofs applied hot @ 1.45, 120 & 1.70 for 1st, 3rd
and
5th course.
22.15
22.16
22.17
22.18

P/F APP.
22.18.1

22.19

P/L APP modified prefabricated five layer, 3 mm thick

water proofing membrane. Tear strength in longitudinal and
transverse direction as 60/80N.
22.19.1

22.20

2 mm (for corrugated roof sheets)

3 mm thick

P/L APP modified prefabricated five layer 3 mm thick

water proofing membrane. Tear strength in longitudinal and
transverse direction as 300/250N.
22.20.1

3 mm thick

440

COEFFICIENTS FOR BITUMEN CONSUMPTION S.H.-22.0 WATER PROOFING

S.No

Correction Slip No.

Reference No.

Contents in Brief

441

S.No

442

Correction Slip No.

Reference No.

Contents in Brief