Comfort A I Re Brochure 10610
Comfort A I Re Brochure 10610
Comfort A I Re Brochure 10610
: 2500 m2
: 50 men
: 220 m2
: 12 person
:
Sound Attenuator
Application:
Sound attenuator used to reduce the noise of generator or fan.
Accessories:
Flange .
Material:
We use galvanized iron sheet 0.6 - 1.2mm. glasswool, glass cloth
Dimension:
The size and dimension adapted with requirement.
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296
Diffuser
Slot Diffuser
Diffuser
Linear Diffuser
Round Diffuser
Exhaust Valve
Diffuser Perforated
DIFFUSER
Application:
Diffuser used as the adjustment of air flow and to supply diffusers of isothermal,
heated or cooled air installation which set on appearance (e.g. Bank, Mall, Office,
etc.) It is recommended that pressure reduction box be used with the diffuser.
Accessories:
Pressure reduction box, damper, etc.
Material:
We use Aluminum and steel as the material. Available in natural color and paint
protection, the color as request.
Dimension:
The photos above show some shapes of diffuser which we produce and the
dimension as request.
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296
Man Hole
Eeg Crate
Louver
RA Grille
GRILLE
Application:
Grille is used for intake and exhaust application in air conditioning system. It can
be used to secure a distribution of air and suited for installation onto walls and
ceiling.
Accessories:
Damper, plenum box, flexible duct, etc.
Material:
Available in steel, aluminum, stainless steel, etc. Steel grilles are protected
with paint, powder coating ( the color as request), etc.
Dimensions:
The pictures show some of our product. Almost all of the grilles are square and
rectangular but another shape as special request could be ordered.
GRILLE
Grille S type
Jet Diffuser
Application:
Jet diffuser used to supply air farther
than side diffuser. It usually used in
hall or ballroom (large room) which need
farther air throw.
Material:
Zincalum
0,8
mm
thickness
electrostatic
powder
coating, or
anodize aluminum , stainless steel could
be ordered.
Dimension:
The dimension and model vary as its
capacity.
Ball Diffuser
Jet Diffuser
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296
Damper
Round Damper
DAMPER
Application:
Damper used to adjust the volume of air flow into a ducting system.
Accessories:
Damper actuator : motor, gear, manual adjuster.
Material:
We use mild steel 1.2mm with zinc chromate. For the special request available
in Galvanized steel, stainless steel, aluminum, etc.
Dimension:
The size from (100x100)mm up to (2400x1200)mm or round damper
Application:
Non Return Damper is one way air flow, used
to relief air through an exhaust fan and shut
off while the fan stopped.
Accessories:
Adjustable counter weight to maintain a
positive pressure of the room.
Material:
We use Extruded aluminum frame and aluminum sheet for the blade with 0.6
mm thickness wall mounted NRD. Or mild steel frame and galvanized iron sheet
blade for duct mounted NRD.
Dimension:
The size from (150x150)mm up to (2400x1200)mm.
FIRE DAMPER
Fusible
link
Application :
Fire damper used to stop the air flow. In normal
condition, the damper is held open by the fusible
link. In case of fire, the fusible link will melt at
74o C and the damper close.
Material:
We use mild steel with 1,2 mm thickness and
coated with zinc chromate.
Dimension:
The dimension could adapted with requirement
DAMPER
Application:
These Dampers are used as a valve to flow or stop the hot air. These were used
in Batam, Indonesia for the tin manufacturing.
Material:
We use mild steel with 10 to 20 mm thickness and coated with paint which can
used at 600o Celsius. The thickness could be adapted with enquiry.
Dimension:
The dimension and the shape adapted with requirement.
Elbow
ELBOW
Application:
Elbow used to distribute the flow of fluids
in the corner which connected to ducting.
Accessories:
Socket or flange for duct connecting.
Material:
Available in
zinc alum, stainless steel,
mild steel, galvanized iron sheet, etc.
Dimension:
The shape of hole which flow the air can be
round or rectangular and the size as
request
Spiro Duct
Square Duct
DUCT
Application:
Duct to be used in air conditioning and ventilation system, as air transfer/ air
passages.
Material:
Galvanized iron steel, mild steel or stainless steel, with 0.4mm minimum
thickness depend on function.
Dimension:
The dimension is adaptable. rectangular, round or spiro duct are the variety of
duct shapes. System : TDF (Flange), Lockformed, sock or welded. Thinner
material is used for spiro duct than rolled round duct, resulting stronger and
lighter ducting system with less joint, because of longer pieces.
Housing Filter
Application:
Hepa filter box (filter housing) is
used
to
accomodate
hepa
filter,medium and pre filter without
leakage in between.
maaterial:
Stainless steel or mild steel with
1.2 1.5 mm thickness and coated
with paint or powder coating.
Dimension:
The
dimension and shape could
adapted with requirement.
FILTER
Application:
The filter generally used to clean up the air from
particle or the other pollutant.
Material:
Frame: aluminum, galvanized iron sheet , stainless steel
filter media: Syntetic Fibre,Aluminium
Dimension:
The dimension and the shape adapted with requirement.
Element Filter
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296
Cable Ladder
Cable Tray
CABLE LEADER/TRAY
Application:
These products used to support cable or pipe
and make them regular.
Accessories:
Hanger beam, bracket mounting, angle bracket,
hanger plate, etc.
Material:
These products shall be made from corrosion
resistant metal, metal with corrosion resistant
finish, or metal with protected against corrosion
by being coat with paint or powder coating.
Dimension:
The dimension could adapted with request and
some of the shapes we can see like the photos.
Hygrometer Box
Panel Box
PANEL BOX
Application:
As the compartment of electric power control and safety, electric
instrument. Fuses, circuit-breaker, hydrant box, telecommunication
instrument
Accessories:
Panel key, instrument, gauge, pilot-lamp etc.
Material:
Mild steel , Aluminum, GIS with powder coated finish, Stainless steel etc.
With various thickness
Dimension:
Will be adjusted as requirement .
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296
Oil Tank
Water Tank
TANK
Application:
The tank used to storage the oil or
water. This is not pressure tank.
Material:
This product used mild steel or stainless
steel.
Dimension:
This tank is our special product which
adapted with enquire both shape and
size.
Grease Trap
GREASE TRAP
Application:
The Grease trap generally used to
separate the grease from the water.
Material:
To keep the water hygienist, we use
the stainless steel 304 which could
prevent the corrosion or we can use
the aluminum. The thickness could
adapted with enquiry.
Dimension:
The dimension and the shape adapted
with requirement.
KITCHEN HOOD
KITCHEN HOOD
Application:
Kitchen Hood generally used in Hotels or restaurants
for
removing
impurities and excess heat with a high degree of grease filtration as well
as providing comfortable and hygienic working conditions.
Material:
Standard material stainless steel 304 2B or BA, thickness 0,8 ~ 1,5 mm. Also
aluminum, zinc alum are avaiable.
Dimension:
The dimension adapted with requirement, there are island type, wall type, with
or without fresh air
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296
Camera Housing
CAMERA HOUSING
Application:
Camera Housing used to put
the camera inside and it
usually outdoor camera so it
must protect
the camera
from rain (water) or sun light.
It is usually used
in
big
field, factory, supermarket to
watch the situation.
Material:
We use mild steel with 1.2 mm thickness and coated with powder coating.
Dimension:
The dimension and shape adapted with requirement.
FAN CUP
Fan Cup
Application:
Fan Cap used as air ventilation on outside wall
and prevent rain water coming in
Material:
We use mild steel
0,8 mm thickness ,electro
static powdercoating finish. Aluminum, stainless
steel also available.
Dimension:
The dimension and shape could be adapted to
match the requirement.
Plenum Box
PLENUM BOX
Plenum Box
Application:
Plenum box is designed to reduce the pressure or collect the air from the air
conditioner then distribute this to diffuser or other accessories.
Accessories:
Shut off damper could be added to the inlet spigot.
Material:
Available in galvanized iron sheet with Styrofoam insulation.
Dimension:
Almost all of the shape of plenum box as picture and the size can be adapted to
the request.
PT COMFORT AIRE ANEKA TEKNIK
AIR DISTRIBUTION AND OTHER TECHNICAL PRODUCTS
PHONE (021) 7402068; 7491264/5. FAX (021) 7355296