Ies Ec Syllabus

www.gate2016.
info
ELECTRONICS & TELECOMMUNICATION ENGINEERING
(For both objective and conventional type papers)
PAPER I
1. Materials and Components :
Structure and properties of Electrical Engineering materials; Conductors, Semiconductors and
Insulators, magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Super-conducting
materials. Passive components and characteristics Resistors, Capacitors and Inductors; Ferrites,
Quartz crystal Ceramic resonators, Electromagnetic and Electromechanical components.
2. Physical Electronics, Electron Devices and ICs :
Electrons and holes in semiconductors, Carrier Statistics, Mechanism of current flow in a
semiconductor, Hall effect; Junction theory; Different types of diodes and their characteristics;
Bipolar Junction transistor; Field effect transistors; Power switching devices like SCRs, GTOs,
power MOSFETS; Basics of ICs - bipolar, MOS and CMOS types; basic of Opto Electronics.
3. Signals and Systems :
Classification of signals and systems: System modelling in terms of differential and difference
equations; State variable representation; Fourier series; Fourier transforms and their application
to system analysis; Laplace transforms and their application to system analysis; Convolution and
superposition integrals and their applications; Z-transforms and their applications to the analysis
and characterisation of discrete time systems; Random signals and probability, Correlation
functions; Spectral density; Response of linear system to random inputs.
4. Network theory :
Network analysis techniques; Network theorems, transient response, steady state sinusoidal
response; Network graphs and their applications in network analysis; Tellegen's theorem. Two
port networks; Z, Y, h and transmission parameters. Combination of two ports, analysis of
common two ports. Network functions : parts of network functions, obtaining a network function
from a given part. Transmission criteria : delay and rise time, Elmore's and other definitions
effect of cascading. Elements of network synthesis.
5. Electromagnetic Theory :
Analysis of electrostatic and magnetostatic fields; Laplace's and Poisson's equations; Boundary
value problems and their solutions; Maxwell's equations; application to wave propagation in
bounded and unbounded media; Transmission lines : basic theory, standing waves, matching
applications, microstrip lines; Basics of wave guides and resonators; Elements of antenna theory.
6. Electronic Measurements and instrumentation :
Basic concepts, standards and error analysis; Measurements of basic electrical quantities and
parameters; Electronic measuring instruments and their principles of working : analog and
digital, comparison, characteristics, application. Transducers; Electronic measurements of non
electrical quantities like temperature, pressure, humidity etc; basics of telemetry for industrial
use.
www.gate2016.info
ELECTRONICS & TELECOMMUNICATION ENGINEERING
(For both objective and conventional type papers)
PAPER II
1. Analog Electronic Circuits :
Transistor biasing and stabilization. Small signal analysis. Power amplifiers. Frequency
response. Wide banding techniques. Feedback amplifiers. Tuned amplifiers. Oscillators.
Rectifiers and power supplies. Op Amp, PLL, other linear integrated circuits and applications.
Pulse shaping circuits and waveform generators.
2. Digital Electronic Circuits :
Transistor as a switching element; Boolean algebra, simplification of Boolean functions,
Karnaguh map and applications; IC Logic gates and their characteristics; IC logic families :
DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic
Circuits; Half adder, Full adder; Digital comparator; Multiplexer Demulti-plexer; ROM an their
applications. Flip flops. R-S, J-K, D and T flip-flops; Different types of counters and registers
Waveform generators. A/D and D/A converters. Semiconductor memories.
3. Control Systems :
Transient and steady state response of control systems; Effect of feedback on stability and
sensitivity; Root locus techniques; Frequency response analysis. Concepts of gain and phase
margins: Constant-M and Constant-N Nichol's Chart; Approximation of transient response from
Constant-N Nichol's Chart; Approximation of transient response from closed loop frequency
response; Design of Control Systems, Compensators; Industrial controllers.
4. Communication Systems :
Basic information theory; Modulation and detection in analogue and digital systems; Sampling
and data reconstructions; Quantization & coding; Time division and frequency division
multiplexing; Equalization; Optical Communication : in free space & fiber optic; Propagation of
signals at HF, VHF, UHF and microwave frequency; Satellite Communication.
5. Microwave Engineering :
Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides
and other Microwave Components and Circuits, Microstrip circuits, Microwave Antennas,
Microwave Measurements, Masers, lasers; Microwave propagation. Microwave Communication
Systems terrestrial and Satellite based.
6. Computer Engineering :
Number Systems. Data representation; Programming; Elements of a high level programming
language PASCAL/C; Use of basic data structures; Fundamentals of computer architecture;
Processor design; Control unit design; Memory organisation, I/o System Organisation.
Microprocessors : Architecture and instruction set of Microprocessors 8085 and 8086, Assembly
language Programming. Microprocessor Based system design : typical examples. Personal
computers and their typical uses.

Ies Ec Syllabus

Uploaded by

Copyright:

Available Formats

Ies Ec Syllabus

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ies Ec Syllabus

Uploaded by

Copyright:

Available Formats

www.gate2016.

You might also like