DL Bop Brochure

DL Annular BOP
Camerons lightweight annular blowout preventer
amerons DL Annular BOP allows reliable

performance in a shorter height and lighter
weight than comparable annular preventers.
The unique design of the DL BOP does not require

wellbore assist. The annular can close on drillpipe or
large tubulars without reducing operating pressure,
which minimizes risk of indention or damage to casing.
Sizes: 7-1/16 to 21-1/4
Working Pressures: 2000 to 10,000 psi
Dual configurations available for certain sizes
Functionality
Closing pressure forces the operating piston and pusher
plate upward to displace the solid elastomer donut and
force the packer to close inward. As the packer closes,
interlocking-steel reinforcing inserts rotate inward to form
a continuous support ring of steel at the top and bottom
of the packer. The inserts remain in contact with each
other whether the packer is open, closed on pipe, or
closed on open hole.
Features
A quick-release top with a one-piece split lock ring
permits quick packer changeout with no loose parts
involved. The design also provides visual indication of
whether the top is locked or unlocked
Components subject to wear are field-replaceable and
the entire operating system may be removed in the field
for immediate changeout, without removing the BOP
from the stack
Twin seals separated by a vented chamber positively
isolate the BOP operating system from wellbore pressure.
High-strength polymer bearing rings prevent metal-tometal contact and reduce wear between all moving parts
of the operating system
Available with a three-inch gas bleed port that runs from
the inner diameter to the outer diameter
Packers for DL BOPs have the capacity to strip pipe as
well as close and seal on any size object that fits in the
wellbore. These packers will also close and seal on open
hole at half working pressure
Stripping packers are available and reference information
is available in TC9609 E-24
Popular sizes of the DL BOP are available with highperformance CAMULAR annular packer subassemblies
Manufactured to comply with NACE specification
MR-01-75 for H2S service
Packer with interlocking segments
Packer, stripping
DL BOP dual configuration
Access Flaps
Quick-Release Top
Packer Inserts
Locking Groove in Body

Packer
Donut
Pusher Plate
Vent
Opening Hydraulic Ports
Outer Cylinder Lock-down
Opening Piston
Closing Side of Piston

Closing Hydraulic Ports
Vent
Vent
Bore
DL BOP Dimensional Information

Size and Working
Pressure
Height (in./mm)
Diameter (in./mm)
Weight (lb/kg)
Gal/L to Close
Gal/L to Open
7-1/16" 3000 psi
23.94/557
27.88/708
2738/1241
1.69/6
1.39/5
7-1/16" 5000 psi
25.50/647
27.88/708
2778/1260
1.69/6
1.39/5
7-1/16" 10,000 psi
34.22/869
37.38/949
7255/3290
2.94/11
2.55/9
7-1/16" 15,000 psi
44.75/1136
43.25/1098
12,000/5443
6.94/26
6.12/23
7-1/16" 20,000 psi
50.75/1289
48/1219
17,716/8035
8.38/31
7.56/28
11" 3000 psi
32.50/825
41.25/1047
8255/3744
5.65/21
4.69/17
11" 5000 psi
34.94/887
41.25/1047
8447/3831
5.65/21
4.69/17
11" 10,000 psi
41.06/1042
48.50/1231
13,954/6239
10.15/38
9.05/34
11" 15,000 psi
62.50/1587
61/1549
36,500/16,556
23.50/88
21.3/80
13-5/8" 3000 psi
36.69/931
52.38/1330
12,855/5830
12.12/45
10.34/39
13-5/8" 5000 psi
40.19/1020
52.38/1330
16,215/7355
12.12/45
10.34/39
13-5/8" 10,000 psi
49.09/1246
61/1549
27,262/12,365
18.10/68
16.15/61
16-3/4" 3000 psi
47/1193
60.50/1536
25,950/11,770
22.30/84
19.00/71
16-3/4" 5000 psi
49/1244
60.50/1536
26,300/11,929
22.30/84
19.00/71
18-3/4" 5000 psi
60.81/1544
62/1574
29,560/13,408
35.60/134
29.00/109
18-3/4" 10,000 psi
70.50/1790
67/1701
40,940/18,570
51.00/193
45.10/170
20-3/4" 3000 psi
54.75/1390
66/1676
29,500/13,380
40.50/153
28.40/107
21-1/4" 2000 psi
53.31/1354
66/1676
29,000/13,154
40.50/153
28.40/107
21-1/4" 5000 psi
64.84/1646
71.69/1820
36,000/16,329
40.50/153
28.40/107
4601 Westway Park Blvd

Houston, Texas 77041
USA
Tel 1 281 606 6000
Learn more about annular BOP solutions at:
www.c-a-m.com or email [email protected]
ENVIRONME
N
XCELLEN
LE
CE
TA
TH SAFETY
AL
A
HE
ND
CA
HSE Policy Statement

At Cameron, we are committed ethically, financially and personally to a
working environment where no one gets hurt and nothing gets harmed.
MERON
2015 Cameron | CAMERON is a registered trademark of Cameron. CAMULAR is a trademark of Cameron. | 6/15 AD01591DRL

DL Bop Brochure

Uploaded by

Copyright:

Available Formats

DL Bop Brochure

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DL Bop Brochure

Uploaded by

Copyright:

Available Formats

DL Annular BOP

Camerons lightweight annular blowout preventer

amerons DL Annular BOP allows reliable

The unique design of the DL BOP does not require

Packer with interlocking segments

DL BOP dual configuration

Locking Groove in Body

Outer Cylinder Lock-down

Closing Side of Piston

DL BOP Dimensional Information

7-1/16" 3000 psi

7-1/16" 5000 psi

7-1/16" 10,000 psi

7-1/16" 15,000 psi

7-1/16" 20,000 psi

11" 3000 psi

11" 5000 psi

11" 10,000 psi

11" 15,000 psi

13-5/8" 3000 psi

13-5/8" 5000 psi

13-5/8" 10,000 psi

16-3/4" 3000 psi

16-3/4" 5000 psi

18-3/4" 5000 psi

18-3/4" 10,000 psi

20-3/4" 3000 psi

21-1/4" 2000 psi

21-1/4" 5000 psi

4601 Westway Park Blvd

HSE Policy Statement

You might also like