HORSEPOWER

Gross: 671 kW 899 HP @ 2000 rpm

Net: 664 kW 890 HP @ 2000 rpm

STANDARD EQUIPMENT

Air conditioner with heater and defroster

Air-suspension seat
Alternator, 100 A/24 V
Auto-priming system
Back-up alarm
Batteries, 200 Ah/4 x 12 V
Blower fan
Decelerator pedal
Dry-type air cleaner with dust evacuator
and dust indicator
Eight-roller track frames
Final drive case wear guard

Shoes, 710 mm 28" extreme service,

single-grouser
Starting motors, 2 x 7.5 kW/24 V
Steel cab
Steering control
Sun visor
TORQFLOW transmission
Track roller guards
VHMS (without orbcomm)
Warning horn
Water separator
Wet steering clutches

ROPS*:
Weight . . . . . . . . . . . . . . . . 940 kg 2,070 lb

Steel cab**:
Weight . . . . . . . . . . . . . . . . 455 kg 1,000 lb

Dimension:
Width . . . . . . . . . . . . . . . . . . 1940 mm 6'4"

Dimension:
Length. . . . . . . . . . . . . . . 1790 mm 5'10"
Width . . . . . . . . . . . . . . . . 1455 mm 4'9"
Height from compartment
floor to ceiling . . . . . . . . 1530 mm 5'0"

*Meets ISO 3471, SAE J1040 APR88, ROPS

standards.

OPERATING WEIGHT
108390 kg 238,960 lb

D475A-5E0

CRAWLER DOZER

Hinged underguard with front pull hook

Hydraulic track adjusters
Lighting system (including four front
and two rear lights)
Lockup torque converter
Mirror
Mirror, rearview
Muffler with rain cap
Perforated front mask
Radiator reserve tank
ROPS brackets
Seat belt
Segmented sprockets

**Meets ISO 3449 FOPS standard.

OPTIONAL EQUIPMENT
Variable giant ripper:
Variable, parallelogram single-shank ripper
ideal for ripping up tough material. Ripping
angle is variable. Ripping depth is adjustable
in four stages by a hydraulically controlled
pin puller.
Weight (including hydraulic
control unit) . . . . . . . . 7360 kg 16,230 lb
Beam length . . . . . . . . . . . . 1477 mm 4'10"
Maximum lift above ground . 1196 mm 3'11"
Maximum digging depth . . . . 1744 mm 5'9"

Additional cab heater

Battery isolator
Coal dozer
Counterweight
Double wiper
Dual tilt dozer
Fast fuel fill
Fire extinguisher

www.Komatsu.com

Hydraulics for ripper

Lattice front mask
Light for ripper
Orbcomm
Prelubrication
Push plate
Radio-AM/FM cassette
Safety glass

Multi-shank ripper:
Hydraulically controlled parallelogram ripper
with three shanks. Ripping angle variable
and depth adjustable in two stages.
Weight (including hydraulic
control unit) . . . . . . . . 9720 kg 21,430 lb
Beam length . . . . . . . . . . . . 3085 mm 10'1"
Maximum lift above ground . 1196 mm 3'11"
Maximum digging depth . . . . 1124 mm 3'8"

Shoes:
810 mm 32"
910 mm 36"
Spill guards
Strengthened Semi-U blade
Strengthened U blade
Track shoe slip control system

Printed in Japan 200801 IP.AD (10)

Photo may include optional equipment.

CEN00075-02

Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.

D475A-5E0 C R A W L E R D O Z E R

WALK-AROUND

HORSEPOWER
Gross: 671 kW 899 HP @ 2000 rpm
Net: 664 kW 890 HP @ 2000 rpm

Unique and unrivaled noise-suppression.

SAA12V140E-3 turbocharged
after-cooled diesel engine provide
an output of 664 kW 890 HP with excellent
productivity, while meeting EPA Tier 2
emission regulation.
See page 6.

Extra-low machine profile

provides excellent machine balance
and low center of gravity.

D475A-5E0

CRAWLER DOZER

Komatsu-integrated design
for the best value, reliability, and versatility.
Hydraulics, power train, frame, and all
other major components are engineered
by Komatsu. You get a machine whose
components are designed to work together
for higher production, greater reliability,
and more versatility.

Hydraulic drive radiator cooling

fan controlled automatically, reduces fuel
consumption and operating noise levels.
See page 6.

New hexagonal designed cab includes:

OPERATING WEIGHT
108390 kg 238,960 lb

Spacious interior
Comfortable ride with new cab damper mounting and K-Bogie
undercarriage
Excellent visibility
High capacity air conditioning system
PCCS (Palm Command Control System) lever controls
Pressurized cab
Adjustable armrest
Travel control console integrated with operator seat

BLADE CAPACITY
Semi-U: 27.2 m3 35.6 yd3
Full-U: 34.4 m3 45.0 yd3

ECMV (Electronic Controlled Modulation Valve)

controlled steering clutch/brake system
facilitates steering operation.
See page 5.

Preventative maintenance

Low noise
Operator noise: 70dB(A)
(Engine at Hi, cooling fan at 70%, and air conditioner OFF.)

Centralized service station

Enclosed hydraulic piping
Modular power train design
Oil pressure checking ports
See page 9.

Dynamic noise (outside): 110dB(A)

As per ISO 6395

See page 8.

VHMS (Vehicle Health Monitoring

System)
See page 9.

Simple hull frame

and monocoque track
frame with pivot shaft
for greater reliability.

Large blade capacities:

27.2 m3 35.6 yd3 (Semi-U
dozer) and 34.4 m3 45.0 yd3
(U dozer) See page 7.

The dual tilt dozer

(option) increases
productivity while
reducing operator
effort. See page 7.

Automatic lockup torque converter

saves fuel and increases speed and
power transmission efficiency on
long pushes. See page 6.

Rippers (option):
Variable giant
Multi-shank
See page 7.

New track link design

Low-drive, long-track, eight roller undercarriage

K-Bogie undercarriage system

reduces maintenance cost by

making turning pins easier, with
improved pin reuse. See page 9.

ensures outstanding grading ability and stability.

improves traction, component durability,

and operator comfort. See page 6.

Track shoe slip control system (option)

reduces operator fatigue. See page 7.

Photo may include optional equipment.

D475A-5E0 C R A W L E R D O Z E R

CRAWLER DOZER

PCCS (PALM COMMAND CONTROL SYSTEM)

D475A-5E0

Power Train Electronic Control System

Smooth and soft operation
D475A-5E0 utilizes a newly designed power train electronic control system. The controller registers the amount of operator

Komatsus new ergonomically designed control system PCCS creates an operating

environment with complete operator control.

control (movements of lever and operation of switches) along with machine condition signals from each sensor to acculately
calculate the control of the torque converter, transmission, steering clutches and brakes for optimized machine operation. The
ease of operation and productivity of the new D475A-5E0 is greatly improved through

Human-Machine Interface

ECMV (Electronic Controlled Modulation Valve) controlled transmission

Controller automatically adjusts each clutch engagement depending on travel

Palm command
electronic controlled
travel control joystick

Left-hand joystick

Ergonomically designed palm

Fuel control dial

conditions such as gear speed, revolution and shifting pattern. This provides

Engine revolution is controlled by electric signals, providing

shockless smooth clutch engagement, improved component reliability,

ease of operation eliminating maintenance of linkage and

improved component life and operator ride comfort.

relaxed posture and superb

shifting is simplified with

Time

ECMV (Electronic Controlled Modulation Valve) controlled steering clutches/brakes

Palm command PPC controlled

blade control joystick

provides the operator with a

fatigue. Transmission gear

Electronic Controlled
Modulation Valve (ECMV)
Conventional modulation valve

joionts.

command travel joystick

fine control without operator

Clutch pressure

these new features.

Blade and ripper

control joystick

Sensors monitor machine operating conditions, and electronically control steering clutches and brakes depending on type of

Blade control joystick uses the PPC (Proportional Pressure

job, such as size of load during dozing, incline angle of slope or load, providing smooth and ease of operation by reducing

Control) valve and the same palm command type joystick as

counter-steering on downhill travel, etc.

travel control joystick. PPC control, combined with the highly

Effect of ECMV steering clutches/brake control

reliable Komatsu hydraulic system, enables superb fine

thumb push buttons.

control. (Dual tilt and pitch operation are enabled by

Fully adjustable
suspension seat and
travel control console

depressing switch with a thumb. This is available when

installing optional dual tilt dozer.)

For improved rear visibility

Height adjustable blade control armrest

during return part of cycle, the operator can adjust the seat

Blade control armrest is height adjustable without any tools

15 to the right. The transmission and steering controls

in three stages, providing the operator with firm arm support

move with the seat for best operator comfort. The operator

and ideal armrest positioning.

seat is also tiltable for facilitating down hill dozing. The

When dozing and

turning, ECMV
automatically controls
stroke ratio of
steering clutches and
brakes depending on
degree of load,
enabling smooth
dozing and turning.

When dozing downhill, ECMV

automatically controls steering clutches
and brakes depending on incline of
machine or degree of load, reducing
counter-steering and producing
smooth dozing operation.

Position adjustable ripper control lever

Preset travel speed function

height. With an independently adjustable armrest, each

Ripper control lever is position adjustable, providing optimum

Preset travel speed selection function is standard equipment, enabling the operator to select fore and aft travel speed from

D475A operator can adjust control positions to his individual

operation posture for all operators during ripping operations

three preset patterns; F1-R1, F1-R2 and F2-R2 by using the UP/DOWN switch. When the F1-R2 or F2-R2 preset pattern is

preference, providing optimum operational posture for all

facing front or watching ripper point.

selected and the travel control is moved into forward or reverse, the machine travels in the preset gear range automatically.

travel control console has adjustments fore and aft, and for

operators.

This function reduces manual gear shifting frequency during machine operation, enabling the operator to focus on directional
and hydraulic control. Preset travel speed selection is especially helpful when used in combination with the Auto-Downshift
Function and reduces cycle times during repeated round trip operations.

Facing front

Outline of electronic control system

Indicator
Fuel
control
dial

Travel
control
lever

Blade
control
lever

Ripper
control
lever

UP

Service
switch

Auto shift
down switch

Heavy load

Light load

F1-R1 MODE
Press DOWN switch

Press UP switch

F1-R2 MODE
Press DOWN switch

Monitor panel
DOWN

Press UP switch

F2-R2 MODE

MONITOR SYSTEM

Deceleration
pedal

Transmission
controller

Engine controller

Transmission control
Torque converter control
Implement control

Steering controller

ECMV
ECMV
ECMV
ECMV
ECMV

Lockup

Auxiliary
valve

Fuel temp.
Water Engine oil
temp. pressure
Fuel control
valve unit

Engine

Torque converter

Auto downshift function

Controller monitors engine speed, travel gear and travel
speed. When load is applied and machine travel speed is
reduced, the controller automatically downshifts to optimum

Transmission
control valve
Engine
speed

ECMV
ECMV
ECMV
ECMV

When turned 15

Pitch
angle
sensor
Acceleration
sensor
Brake pedal
potentio meter

Electronic controlled
transmission

Transmission
output
speed
sensor

Actuated on heavy load

or steep slope

gear speed to provide high fuel efficiency. This function

provides comfortable operation and high productivity without
manual downshifting. (This function can be cancelled with

Electronic controlled
steering/brake system

cancel switch.)
5

D475A-5E0 C R A W L E R D O Z E R

CRAWLER DOZER

PRODUCTIVITY FEATURES

D475A-5E0

Large blade
Capacities of 27.2 m3 35.6 yd3 (Semi-U dozer) and 34.4 m3 45.0 yd3 (U dozer) yield

Engine

outstanding production. High-tensile-strength steel has been incorporated into the front and
sides of the blade for increased durability.

The Komatsu SAA12V140E-3 engine delivers 664 kW 890 HP

K-Bogie undercarriage system

Dual tilt dozer (option)

at 2000 rpm. These features, together with the heavy

New K-Bogie Undercarriage System combines prior

machine weight, make the D475A-5E0 a superior crawler

The dual tilt dozer increases productivity while reducing operator effort.

advantages with new additional features.

Optimum blade cutting angle for all types of materials and grades can be selected

dozer in both ripping and dozing production. The engine is

designed to surpass EPA Tier 2 emission regulation, and

Current features:

on-the-go for increased load and production.

K-Bogies that oscillate with two fulcrums assure large

Digging, hauling, and dumping are easy and smooth with less operator fatigue.

and air-to-air aftercooler to maximize fuel efficiency.

amount of track roller vertical travel. Impact load to

undercarriage components is minimized and durability of

Dozer tilt angle and tilt speed are twice that of a conventional single tilt system.

To minimize noise and vibration, the engine is mounted

to the main frame with rubber cushions.

components is improved since track rollers are always in

Rippers (option)

contact with track link.

The variable giant ripper features a long sprocket center-to-ripper point distance, making

features direct fuel injection, turbocharger,

Hydraulic drive radiator cooling fan

Fan rotation is automatically controlled depending on
coolant and hydraulic oil temperature, saving fuel
consumption and providing great productivity with a quiet
operating environment.

Track rollers follow track link movement to extend the

undercarriage life.
Excellent riding comfort is provided due to less vibration
and shock when traveling over rough terrain.
Features on new K-Bogie undercarriage system:

Automatic torque converter lockup system

New K-Bogies with front and rear single bogies are utilized

For greater efficiency during long pushes, the lockup

providing increased length of track on ground to improve

mode allows the system to automatically engage the torque

machine stability.

converter lockup clutch. Locking up the torque converter

transmits all the engine power directly to the transmission,

ripping operation easy and effective while maintaining high penetration force.
The variable giant ripper is a parallelogram single shank ripper ideal for ripping up tough
material. The ripping angle is variable, and the depth is adjustable in four stages by a
hydraulically controlled pin puller.
The multi-shank ripper is a hydraulically controlled parallelogram ripper with three shanks.
The ripping angle is variable and depth is adjustable in two stages.

The oscillating idler and increased sprocket lead angle

improve riding comfort when travelling over rough terrain.

increasing ground speed thus achieving efficiencies equal

to a direct drive. The result is efficient use of engine power,
less fuel consumption, and faster cycle times.

Fulcrum of major bogie

Fulcrum of minor bogie

Engine

Torque
converter

Transmission

Track shoe slip control system (option)

Eliminates the need for the operator to constantly control engine power output with the decelerator
while ripping. Operator fatigue is substantially reduced.
Lockup OFF

Lockup ON

Maneuverability is improved because the operator is free to focus on the ripping application without
having to monitor the track shoe slippage.

Track shoe slip

control panel

Repair costs are significantly lowered and undercarriage life is prolonged with the reduction in track
shoe slippage.
The track shoe slip control system will contribute to lower fuel costs, because the engine output is
automatically controlled to optimum levels for operation.

D475A-5E0 C R A W L E R D O Z E R

CRAWLER DOZER

D475A-5E0

EASY MAINTENANCE

WORKING ENVIRONMENT
Operator Comfort

Preventative Maintenance

Operator comfort is essential for safe and productive work. The D475A-5E0
provides the operator with a quiet, comfortable environment where the operator
can concentrate on the work at hand.

Preventative maintenance is the only way to ensure long service life from your equipment. Thats why Komatsu designed the
D475A-5E0 with conveniently located maintenance points to make necessary inspections and maintenance quick and easy.

Hexagonal pressurized cab

The cabs new hexagonal design and large tinted glass windows provide
excellent front, side, and rear visibility.
Improved cab sealing, air filters and increased internal air pressure combine to
prevent dust from entering the cab.
The floor mat and door sill are the same height to facilitate easy cleaning.
The high quality cab interior is fully lined with sound absorbing material.

Centralized service station

VHMS (Vehicle Health Monitoring System)

To ensure convenient maintenance, the transmission

and torque converter oil filters are both arranged next to
the power train oil level gauge.

VHMS controller monitors the health conditions of major

components and enables remote analysis of the machine
and its operation. This process is supported by the Komatsu
distributors, factory and design team. This contributes to
reduced repair costs and to maintaining maximum availability.

Monitor with self-diagnostic function

If the monitor finds abnormalities, corresponding warning
lamp blinks and warning buzzer sounds. When
abnormalities occur during operation, user code and service
meter are displayed alternately. When a high importance user
code is displayed, a caution lamp
blinks and warning buzzer sounds to
prevent the development of serious
problems.

Comfortable ride with new cab damper mounting

and K-Bogie undercarriage
D475A-5E0s cab mount uses a new cab damper
mounting which further improves viscous damper and
provides excellent shock and vibration absorption capacity
with its long stroke. The cab damper mounting, combined
with new K-bogie undercarriage, softens shocks and
vibrations while traveling over adverse condition that are
impossible to absorb with conventional cab mounting
methods. The soft spring cab damper isolates the cab
from machine body, suppressing vibrations and providing
a quiet, comfortable operating environment.

Satellite
communication (option)
Customer
job site
KOMATSU

Oil pressure checking ports

Internet

Pressure checking ports for power train components are

centralized to promote quick and simple diagnosis.

Gull-wing engine side covers

Gull-wing engine side covers facilitate engine maintenance
and filter replacement. Side covers are a thick
one-piece structure with bolt-on latch to improve durability
and repairability.

Operator noise: 70dB(A) (Engine at high idle, fan speed at 70%, and air conditioner OFF)
Dynamic noise (outside): 110dB(A) (As per ISO 6395)

WebCARE server
Komatsu
distributors

Personal
computer
terminal
(for downloading
data)

Improvement of visibility in rear of blade

Low Maintenance Costs

The shape of the blade heel and the position of the operator's
seat are changed so that the operator can check the ground in the rear of the
blade during dozing. Accordingly, the operator can work more accurately. In
addition, the position of the exhaust pipe is changed for better front visibility.

Track link with wedge ring

New suspension seat

D475A-5E0 uses a new air suspension seat. Fore and aft sliding rails and
suspension spring increasing strength and rigidity and reducing play of joints.
In addition to turning function for ripper operation, the seat is also tiltable to
facilitate down hill dozing.

Relocated air intake ports of air conditioner

The air conditioner fresh air inlet is located above the fender to prevent dust
from the undercarriage from entering the cab. The inside air recirculation inlet is
located behind the operator's seat, away from the dirt and dust of the floor mat,
to provide an increased cleaning/replacement interval.

Cab damper mounting

Rubber Boot
Rubber

New D475A-5E0 track links

feature reduced press-fit force
and a wedge ring. Conventional
track pins are retained only with
a large press-fit force. This results
in easier service with reduced pin
Track
damage when turning pins and
guiding
guard
bushings. The result is improved
undercarriage life and reduced
Wedge ring
maintenance cost through
reduced wear, greater pin
reusability, and reduced maintenance man-hours.

Flat face O-Ring seals

Pin press fitting
force +
wedge ring
holding force

Highly reliable electric circuit

Silicon Oil

Spring

The electrical circuit reliability is increased by utilizing dust,

vibration and corrosion resistant "DT connectors". The
reinforced electrical wiring harnesses include a circuit
breaker and are covered with a heat-resistant material to
increase mechanical strength, provide longer life, and
protect the system from damage.

Flat face O-ring seals are used to securely seal all

hydraulic hose connections and to prevent oil leakage.

Enclosed hydraulic piping

Hydraulic piping for the blade tilt cylinder is completely
housed in the push arm protecting it from damage.

Modular power train design

Power train components are sealed in a modular design
that allows the components to be dismounted and mounted
without oil spillage, making servicing work clean, smooth,
and easy.

Maintenance-free disc brakes

Wet disc brakes require less maintenance.

D475A-5E0 C R A W L E R D O Z E R

CRAWLER DOZER

SPECIFICATIONS

D475A-5E0

DIMENSIONS
SEMI-U DOZER WITH GIANT RIPPER

ENGINE

STEERING SYSTEM

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA12V140E-3

Type. . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injection
Aspiration . . . . . . . . . . . . . . . . . . Turbocharged, air-to-air aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Bore x stroke . . . . . . . . . . . . . . . . . 140 mm x 165 mm 5.51" x 6.50"
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . 30.48 ltr 1,860 in3
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronic
Horsepower
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . . Gross 671kW 899 HP
ISO 9249/SAE J 1349* . . . . . . . . . . . . . . . . . . Net 664kW 890 HP
Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000rpm
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Lubrication system
Method . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . Full-flow and bypass combined
*Net horsepower at the maximum speed of
radiator cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641 kW 860HP

TORQFLOW TRANSMISSION
Komatsu TORQFLOW transmission consists of a water-cooled,
3-element, 1-stage, 1-phase torque converter with lockup clutch
and a planetary gear, multiple-disc clutch transmission which is
hydraulically-actuated and force-lubricated for optimum heat
dissipation. Gearshift lock lever and neutral safety switch
prevent accidental starts.
Reverse
4.2 km/h
2.6 mph
8.0 km/h
5.0 mph
14.0 km/h
8.7 mph
D475A-5E0
Power Shift

Ton

kN

Forward
3.3 km/h
2.1 mph
6.2 km/h
3.9 mph
11.2 km/h
7.0 mph
US Ton

Gear
1st
2nd
3rd

1200 130 120

DRAWBAR PULL VS. SPEED

MAXIMUM USABLE PULL
DEPENDS ON TRACTION AND
WEIGHT OF TRACTOR
INCLUDING MOUNTED
EQUIPMENT

1100 120 110

1000 110 100

DRAWBAR PULL

900 100 90

800

90

700

80

600

70

70

F2(LOCK UP)

40

30
200

100 10

30

F3
F3(LOCK UP)

20

20

4
2

8
4

10
6

12

14 km/h
8

mph

TRAVEL SPEED

FINAL DRIVES
Double-reduction final drive of spur and planetary gear sets to
increase tractive effort and reduce gear tooth stresses for long final
drive life. Segmented sprocket teeth are bolt-on for easy replacement.

J
C
D
G.L
G

A
B

OPERATING WEIGHT
Tractor weight . . . . . . . . . . . . . . . . . . . . . . . . . 83590 kg 184,290 lb
Including steel cab, rated capacity of lubricant, coolant, full fuel
tank, operator, and standard equipment.

Operating weight . . . . . . . . . . . . . . . . . . . . . 108390 kg 238,960 lb

Including strengthened Semi-U tilt dozer, giant ripper, steel cab,
ROPS, operator, standard equipment, rated capacity of
lubricant, coolant, and full fuel tank.
Ground pressure . . . . . . . . . . . . . . . . 166 kPa 1.69 kg/cm2 24.0 psi

Extreme Service Track Shoes

Lubricated tracks. Unique seals prevent entry of foreign
abrasives into pin to bushing clearances to provide extended
service life. Track tension is easily adjusted with grease gun.
HYDRAULIC SYSTEM
Number of shoes (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Grouser height:
Single grouser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 mm 4.1"
Shoe width (standard) . . . . . . . . . . . . . . . . . . . . . . . . . . 710 mm 28"
Ground contact area . . . . . . . . . . . . . . . . . . . . . 64240 cm2 9,957 in2
Ground pressure (Tractor) . . . . . . . . . . 128 kPa 1.30 kg/cm2 18.5 psi
Number of track rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Extreme
service shoes

Additional
weight

Ground
contact area

810 mm
32"

920 kg
2,030 lb

73290 cm2
11,360 in2

910 mm
36"

1830 kg
4,030 lb

82340 cm2
12,762 in2

Tractor ground
pressure
113 kPa
1.15 kg/cm2
16.4 psi
102 kPa
1.04 kg/cm2
14.8 psi

Closed-center load sensing system (CLSS) designed for precise and

responsive control, and for efficient simultaneous operation.
Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank.
Plunger type hydraulic pump with capacity (discharge flow) of 542
ltr/min 143 U.S. gal/min at rated engine rpm.

Hydraulic cylinders . . . . . . . . . . . . . . . . . . . . . . Double-acting, piston

Number of cylinders
2
1
2
2

Blade lift
Blade tilt
Ripper lift
Ripper tilt

Bore
180 mm 7.09"
250 mm 9.84"
225 mm 8.86"
225 mm 8.86"

Relief valve setting . . . . . . . . . . . . . 27.5 MPa 280 kg/cm2 3,980 psi

Control valves:
Spool control valves for Semi-U tilt dozer and Full-U tilt dozer
Positions: Blade lift . . . . . . . . . . . . . . Raise, hold, lower, and float
Blade tilt. . . . . . . . . . . . . . . . . . . . . Right, hold, and left
Spool control valves for variable digging angle multi-shank ripper
and giant ripper.
Positions: Ripper lift . . . . . . . . . . . . . . . . . . Raise, hold, and lower
Ripper tilt. . . . . . . . . . . . . Increase, hold, and decrease

Hydraulic oil capacity (additional volume):

Semi-U tilt dozer . . . . . . . . . . . . . . . . . . . . . . 180 ltr
U tilt dozer . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 ltr
Ripper equipment (additional volume):
Giant ripper . . . . . . . . . . . . . . . . . . . . . . . . . . 130 ltr
Multi-shank ripper . . . . . . . . . . . . . . . . . . . . . 130 ltr

48 U.S. gal
48 U.S. gal
34 U.S. gal
34 U.S. gal

(REFILL)

441 U.S. gal

55.5 U.S. gal
32.0 U.S. gal

DOZER EQUIPMENT
Blade capacities are based on the SAE recommended practice J1265.

55.5 U.S. gal

19.8 U.S. gal

Overall
length with
dozer

Blade
capacity

Blade
length x height

Maximum
lift above
ground

Maximum
drop below
ground

Maximum
tilt
adjustment

Weight
Dozer
equipment

Ground pressure*

Semi-U
dozer

8705 mm
28'7"

27.2 m3
35.6 yd3

5265 mm x 2690 mm
17'3" x 8'10"

1620 mm
5'4"

1010 mm
3'4"

770 mm
2'6"

16500 kg
36,376 lb

166 kPa 1.69 kg/cm2

24.0 psi

U dozer

9205 mm
30'2"

34.4 m3
45.0 yd3

6205 mm x 2610 mm
20'4" x 8'7"

1620 mm
5'4"

1010 mm
3'4"

905 mm
3'

18800 kg
41,446 lb

169 kPa 1.72 kg/cm2

24.5 psi

Dual tilt
Semi-U dozer

8705 mm
28'7"

27.2 m3
35.6 yd3

5265 mm x 2690 mm
17'3" x 8'10"

1620 mm
5'4"

1010 mm
3'4"

1145 mm
3'9"

16950 kg
37,368 lb

166 kPa 1.69 kg/cm2

24.0 psi

Dual tilt
U dozer

9205 mm
30'2"

34.4 m3
45.0 yd3

6205 mm x 2610 mm
20'4" x 8'7"

1620 mm
5'4"

1010 mm
3'4"

1350 mm
4'5"

19250 kg
42,439 lb

170 kPa 1.73 kg/cm2

24.3 psi

10

10

K-Bogie Undercarriage
Lubricated track rollers are resiliently mounted to the track
frame with a bogie suspension system whose oscillating motion
is cushioned by rubber pads.

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1670 ltr

Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 ltr
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 ltr
Torque converter, transmission,
bevel gear, and steering system . . . . . . . . . 210 ltr
Final drive (each side) . . . . . . . . . . . . . . . . . . . . 75 ltr

F2

40
300

Suspension . . . . . . . . . . . . . Oscillating equalizer bar and pivot shaft

Track roller frame. . . . . . . . . . . . . . . Cylindrical, high-tensile-strength
steel construction
Rollers and idlers. . . . . . . . . . . . . . . . . . . . . . Lubricated track rollers

CAPACITY

50

9'1"
17'3"
14'11"
8'10"
14'10"
37'11"
12'2"
5'9"
3'11"
15'3"

Ground Clearance: 655 mm 2'2"

COOLANT AND LUBRICANT

F1(LOCK UP)

60

2770 mm
5265 mm
4546 mm
2690 mm
4524 mm
11565 mm
3720 mm
1744 mm
1196 mm
4646 mm

UNDERCARRIAGE

F1

50
400

Minimum turning radius . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 m 15'1"

80

60
500

PCCS lever, joystick-controlled, wet multiple-disc steering clutches

are spring-loaded and hydraulically released. Wet multiple-disc
steering brakes are spring-actuated, hydraulically released, and
require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.

A
B
C
D
E
F
G
H
I
J

*Ground pressure shows tractor, cab, ROPS, operator, giant ripper, standard equipment, and applicable blade.

11