33PF Disc - 9411682
33PF Disc - 9411682
33PF Disc - 9411682
MCCHU Series
Features:
Capacitance has linear temperature coefficient
Capacitance high stability
Low lost at wide range of frequency
Specification Table
Capacitance Range
1 pF to 820 pF
Capacitance Tolerance
5%
-25C to 85C
50 V
C 30 pF : Q 1,000
C <30 pF : Q 400 +20C
10,000 M minimum
Dielectric Strength
Testing Parameters
Dimensions : Millimetres
Capacitance Chart
Temperature
Characteristics
Capacitance
Rated
Voltage
(V)
Part
Diameter
Range
(pF)
5
MCCH
+60
PPM / C
Maximum Dimension
Tolerance
0.5 - 47
51 - 75
U
(50)
82 - 100
3.5
5.5
6.5
J (> = 10 pF)
7.5
120 - 150
8.5
Dimensions : Millimetres
150
Temperature
Characteristics
Code
Rated
Voltage
Part
Diameter
Capacitance
Code
Tolerance
Code
Lead
Configuration
Code - Bulk
www.element14.com
www.farnell.com
www.newark.com
Page <1>
16/06/12 V1.1
Rated Voltage
MCCH (NPO)
T.C. (PPM / C) or Capacitance
Change (%)
U
Voltage
+60 PPM / C
Part Diameter
50 V
Capacitance Code
Code
Diameter (mm)
Code
Capacitance (pF)
150
15
220
22
330
33
470
47
680
68
101
100
151
150
221
220
Tolerance Code
Code
Tolerance
5%
Straight
2.5
25
Dimensions : Millimetres
Part Number
Capacitor, 15 PF 50 V
MCCHU5150J5
Capacitor, 22 PF 50 V
MCCHU5220J5
Capacitor, 33 PF 50 V
MCCHU5330J5
Capacitor, 47 PF 50 V
MCCHU5470J5
Capacitor, 68 PF 50 V
MCCHU6680J5
Capacitor, 100 PF 50 V
MCCHU7101J5
Capacitor, 150 PF 50 V
MCCHU8151J5
Capacitor, 220 PF 50 V
MCCHU0221J5
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
Page <2>
16/06/12 V1.1