Ms 01 180
Ms 01 180
Ms 01 180
com
Contents
Swagelok Hose and Flexible
Tubing Nomenclature, 4
Metal Hose
Fluoropolymer Hose
Contents
WSeries PTFE Hose, 46
Nylon Hose
Options
Covers, 83
Testing, 83
Tags, 84
Approvals, 84
USeries PFA Hose, 50
PFA Tubing
PFASeries PFA Tubing, 61
Polyethylene Hose
7PSeries Polyethylene Hose, 77
Vinyl Tubing
LTSeries Vinyl Tubing, 63
Rubber Hose
PB Series Rubber Hose, 79
Hose Connectors
HC SeriesEnd Connections for
Soft Tubing and Hose, 64
Flexible Tubing
A single-layered flexible conduit
through which fluid is conveyed from
one point to another.
Bend Radius
The radius of the bent section of
hose, measured to the center line or
inside of the curved section.
Minimum Dynamic Bend Radius
The smallest bend radius that a hose
is rated to perform in a dynamic
application.
Conductivity
The ability of a material to transmit
or conduct an electrical charge.
Swagelok hoses constructed with a
metallic braid layer have the potential
to be conductive hoses. For quick
reference in this catalog, these hoses
are indicated with the symbol (M) in the
hose description.
Permeation
The movement of a liquid, gas, or
vapor through a solid. All materials
are permeable to a degree and
should be tested for application
compatibility prior to installation.
SW
AG
ELO
K
Static Dissipation
The ability of a material to conduct
an electrical charge to ground. Select
Swagelok hoses are constructed with
carbon black-filled nylon, PTFE, or PFA
core material for static dissipation. For
quick reference in this catalog, these
hoses are indicated with the omega
symbol () in the hose description.
SWAGELOK
Hose
A multiple-layered flexible conduit
through which fluid is conveyed from
one point to another.
SWAGELOK
Dynamic Application
An application in which the hose
flexes or changes position.
Static Application
An application in which the hose is
stationary and does not move in any
plane.
Inside
bend radius
Center line
bend radius
Burst Pressure
The pressure at which leakage
occurs when exposed to a laboratory
burst test.
Splices
Splices consist of a connector
fitting and crimp collars that join two
lengths of hose to form assemblies.
Splices may be required to obtain
longer hose lengths of fluoropolymer
hose (B, X, S, C, N, W, F, and U
series), as noted in the Ordering
Information for each series.
Splice dimensions shown in the
table at right are for reference
only and are subject to change.
Additional overall hose length may
be needed to compensate for the
effect of splices on hose minimum
bend radius. For more information,
contact your authorized Swagelok
sales and service representative.
Nominal
Hose Size
in. (mm)
1/8 (3.2)
1/4 (6.4)
3/8 (9.6)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
1 1/2 (38.1)
2 (50.8)
End Connection
The fitting that is assembled
onto each end of the hose to
provide a means of installation
into a fluid system.
Core
The innermost material of the hose
that carries the system media, often
referred to as the wetted surface.
Spring Guard
A helical metal spring used to
protect the hose from abrasion,
overbending, and kinking.
Reinforcement
Material used to
reinforce the core
and increase its
pressure-containing
capacity.
Cover
The outermost material of a hose, used to
protect the reinforcement and core from
environmental conditions and wear.
Core
Reinforcement
Cover
Page
Metal Hose
FM
Convoluted 316L SS
316L SS braid
10
FJ
Convoluted 316L SS
16
FL
Convoluted 316L SS
321 SS braid
21
25
30
304 SS braid
36
Convoluted 321 SS
Fluoropolymer Hose
304 SS braid standard; 316L SS
and alloy 400 braid available
Smooth-bore PTFE
Smooth-bore PTFE
Smooth-bore PTFE
38
Smooth-bore PTFE
Silicone
40
Convoluted PTFE
No cover standard;
silicone cover available
42
Convoluted,
carbon black-filled PTFE
Insulating wrap
and aramid fiber braid
44
Smooth-bore,
carbon black-filled PTFE
Silicone
46
Smooth-bore PTFE
Fiber braid
48
Smooth-bore PFA
302 SS braid
Silicone
50
61
63
PFA Tubing
PFA
Smooth-bore PFA
Vinyl Tubing
LT
NG
Smooth-bore,
static dissipative nylon
Fiber braid
67
7R
Smooth-bore nylon
Fiber braid
71
8R
Smooth-bore nylon
Fiber braid
71
7N
Smooth-bore,
nonconductive nylon
Fiber braid
72
8N
Smooth-bore,
nonconductive nylon
Fiber braid
72
77
Blue Buna N
(other colors available)
79
Nylon Hose
Polyethylene Hose
7P
Smooth-bore polyethylene
Fiber braid
Rubber Hose
PB
Smooth-bore Buna N
Carbon black-filled PTFE core is available for applications that require static dissipation.
Carbon black-filled PFA core is available for applications that require static dissipation.
Temperature
Range
F (C)
900
500
325 to 850
(62.0)
(34.4)
(200 to 454)
520
450
325 to 800
(35.8)
(31.0)
(200 to 426)
1/8
3/16
FM
FJ
FL
CT
T
B
X
S
3000
(206)
3000
(206)
1/4
3/8
1/2
3100
2000
1800
Metal Hose
1500
1200
950
(213)
(137)
(124)
(103)
(65.4)
1600
1470
1110
860
680
680
(110)
(101)
(76.4)
(59.2)
(46.8)
(46.8)
1500
(103)
(6.8)
(1.7)
(1.7)
3000
2500
2000
(206)
(172)
(137)
(103)
(68.9)
3500
3000
1800
1250
1000
(241)
(206)
(124)
(86.1)
(68.9)
3500
3000
1800
1250
1000
(241)
(206)
(124)
(86.1)
(68.9)
1500
1100
750
(103)
(75.7)
(51.6)
1 1/4
25
(18.9)
(82.6)
(82.6)
25
PFA
1200
100
275
3/4
(1.7)
(1.7)
Fluoropolymer Hose
1500
1000
1250
750
375
(86.1)
(51.6)
(25.8)
750
750
500
(51.6)
(51.6)
(34.4)
800
650
450
325
(55.1)
(44.7)
(31.0)
(22.3)
275
180
125
(18.9)
(12.4)
(8.6)
25
(1.7)
325 to 850
(200 to 454)
70 to 1000
(20 to 537)
Page
10
16
21
25
30
36
38
700
525
(48.2)
(36.1)
65 to 450
(53 to 230)
40
42
44
46
48
300
300
250
(20.6)
(20.6)
(17.2)
PFA Tubing
83
61
(5.7)
1 1/2
(4.2)
200
150
65 to 400
(13.7)
(10.3)
(53 to 204)
70 to 400
(20 to 204)
50
61
Vinyl Tubing
LT
40
30
25
15
10
(2.7)
(2.0)
(1.7)
(1.0)
(0.68)
5000
5000
(344)
(344)
2750
2250
2000
(189)
(155)
(137)
5000
4000
(344)
(275)
2750
2250
2000
(189)
(155)
(137)
2750
2250
2000
(189)
(155)
(137)
(103)
350
300
300
Rubber Hose
300
300
(24.1)
(20.6)
(20.6)
(20.6)
40 to 165
(40 to 73)
63
Nylon Hose
NG
7R
8R
7N
8N
7P
PB
3500
2250
2000
(241)
(155)
(137)
2250
(155)
Polyethylene Hose
1500
1500
(103)
(20.6)
T series hose with alloy 400 braid is rated to 1500 psig (103 bar).
C series hose is rated from 20 to 340F (28 to 171C) in the 1 1/2 and 2 in. nominal hose sizes.
PB series hose is rated from 20 to 200F (28 to 93C) in the 1 in. nominal hose size.
40 to 150
(40 to 65)
40 to 200
(40 to 93)
40 to 200
(40 to 93)
40 to 200
(40 to 93)
40 to 200
(40 to 93)
10 to 150
(23 to 65)
40 to 200
(40 to 93)
67
71
71
72
72
77
79
Orientation
Clarify space constraint concerns. Hose assemblies
with elbows and union ball joints may help resolve space
constraint issues.
Pressure
Identify the minimum and maximum pressures (or vacuum)
within and outside the hose assembly.
Desired Flow
Consider desired flow. Hose connection size, core tube
construction, and routed installation may impact flow.
Material
Identify the system media and the environment to which the
hose assembly will be exposed. This will help determine
the materials of construction best suited to the application
demands and whether the hose requires a static dissipative
core.
Drainability
Consider core construction as this will impact drainability.
Movement
Confirm whether the hose assembly will be installed
in dynamic applications as this will require different
considerations than a static application.
Length
Determine the most likely route for installation of the hose,
and use this to identify length requirements.
Test Reports
Identify the need for documentation in the form of test
reports.
Special Testing
Many applications may require testing to requirements
different from the production tests listed. For example, metal
hose assemblies undergo an inboard helium leak test to a
maximum leak rate of 1 3 10 5 stdcm3/s. If your application
uses liquid at a positive pressure, you may request an
additional hydrostatic proof test.
Special Marking
Discuss special marking requirements; there are different
options available to readily identify hose assemblies.
Documentation and Regulatory Requirements
Identify the need for special regulatory approvals or
documentation.
Additional Protection and Covers
Identify whether covers are necessary for additional
protection of the hose assemblies or surrounding systems.
Additional Considerations
Use of hose and tubing within applications and handling
Cautions
Cleanliness
Identify the need for cleanliness. Ease of cleaning the
internal surfaces of the hose, as well as maintaining outside
cleanliness may be of concern.
End Connection
Identify the type of end connections which are most
compatible with the system requirements. End connections
differ with regard to materials of construction and pressure
ratings.
Minimum
straight
length
Correct
Incorrect
Machine Tolerance
Allow for changes in length resulting from machine motion
and tolerances.
Correct
Incorrect
Bend
radius
Correct
Motion Absorption
Distribute movement and prevent bends smaller than the
hoses minimum bend radius by providing sufficient hose
length.
Lengthen
Incorrect
Shorten
Incorrect
Hose Strain
Elbows and adapters can be used to relieve hose strain.
Correct
Correct
Incorrect
Incorrect
10
METAL
Features
All-metal hose promotes corrosion resistance.
316L SS braid
316 SS end
connections
Weld
Technical Data
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Dynamic
Temperature
Range
F (C)
Working
Pressure at
325 to 100F
Vacuum to ...
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
(200 to 37C)
1/4 (6.4)
0.28 (7.1)
0.53 (13.5)
2.25 (5.72)
10.0 (25.4)
3100 (213)
12 400 (854)
0.33 (0.49)
3/8 (9.7)
0.42 (10.6)
0.69 (17.5)
3.00 (7.62)
12.0 (30.5)
2000 (137)
8 000 (551)
0.29 (0.43)
1/2 (12.7)
0.53 (13.5)
0.85 (21.6)
4.50 (11.4)
16.0 (40.6)
1800 (124)
7 200 (496)
0.45 (0.67)
3/4 (19.0)
0.80 (20.3)
1.15 (29.1)
6.00 (15.2)
17.0 (43.2)
325 to 850
1500 (103)
6 000 (413)
0.62 (0.92)
1 (25.4)
1.03 (26.0)
1.45 (36.9)
6.75 (17.1)
20.0 (50.8)
(200 to 454)
1200 (82.6)
4 800 (330)
0.77 (1.15)
1 1/4 (31.8)
1.30 (33.0)
1.75 (44.5)
4.50 (11.4)
23.0 (58.4)
950 (65.4)
3 800 (261)
1.05 (1.56)
1 1/2 (38.1)
1.53 (38.9)
2.02 (51.3)
5.25 (13.3)
26.0 (66.0)
900 (62.0)
3 600 (248)
1.18 (1.76)
2 (50.8)
2.05 (52.1)
2.57 (65.3)
6.75 (17.1)
32.0 (81.3)
500 (34.4)
2 000 (137)
1.66 (2.47)
Pressure-Temperature Ratings
Ratings are based on ASME Code for Pressure Piping, B31.1 Power Piping, and ASME Boiler and Pressure Vessel Code.
Nominal Hose Size, in.
1/4
3/8
Temperature, F (C)
1/2
3100
2604
2356
2170
2015
(213)
(179)
(162)
(149)
(138)
2000 (137)
1680 (115)
1520 (104)
1400 (96.4)
1300 (89.5)
1800
1512
1368
1260
1170
(124)
(104)
(94.2)
(86.8)
(80.6)
600
700
800
850
1922
1829
1767
1736
(132)
(126)
(121)
(119)
1240
1180
1140
1120
1116
1062
1026
1008
(76.8)
(73.1)
(70.6)
(69.4)
(315)
(371)
(426)
(454)
3/4
1 1/4
1 1/2
(85.4)
(81.3)
(78.5)
(77.1)
744
708
684
672
(51.2)
(47.8)
(47.1)
(46.3)
950
798
722
665
618
(65.4)
(54.9)
(49.7)
(45.8)
(42.5)
900 (62.0)
756 (52.0)
684 (47.1)
630 (43.4)
585 (40.3)
500
420
380
350
325
(34.4)
(28.9)
(26.1)
(24.1)
(22.3)
589
561
542
532
(40.5)
(38.6)
(37.3)
(36.6)
558 (38.4)
531 (36.5)
513 (35.3)
504 (34.7)
310
295
285
280
(21.3)
(20.3)
(19.6)
(19.2)
11
Tube
Fitting
Size
in.
NPT
Size
in.
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
Overall
Length
OAL
in. (cm)
12.0 (30.5)
36.0 (91.4)
18.0 (45.7)
36.0 (91.4)
18.0 (45.7)
48.0 (122)
18.0 (45.7)
48.0 (122)
24.0 (61.0)
60.0 (152)
Ordering
Number
SS-FM4SL4PM4-12
SS-FM4SL4PM4-36
SS-FM6SL6PM6-18
SS-FM6SL6PM6-36
SS-FM8SL8PM8-18
SS-FM8SL8PM8-48
SS-FM12SL12PM12-18
SS-FM12SL12PM12-48
SS-FM16SL16PM16-24
SS-FM16SL16PM16-60
Live
Length
L
in. (cm)
8.26 (21.0)
32.3 (82.0)
14.2 (36.1)
32.2 (81.8)
13.6 (34.5)
43.6 (111)
13.4 (34.0)
43.4 (110)
18.8 (47.8)
54.8 (139)
Dimensions
Minimum
Inside
Diameter
in. (mm)
Maximum
Outside
Dimension
in. (mm)
0.19
(4.8)
0.28
(7.1)
0.41
(10.4)
0.66
(16.0)
0.88
(22.4)
0.95 (24.1)
1.09 (27.7)
1.23 (31.3)
1.74 (44.2)
2.03 (51.6)
Tube
Fitting
Size
in.
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
Overall
Length
OAL
in. (cm)
12.0 (30.5)
36.0 (91.4)
18.0 (45.7)
36.0 (91.4)
18.0 (45.7)
48.0 (122)
18.0 (45.7)
48.0 (122)
24.0 (61.0)
60.0 (152)
Ordering
Number
SS-FM4SL4SL4-12
SS-FM4SL4SL4-36
SS-FM6SL6SL6-18
SS-FM6SL6SL6-36
SS-FM8SL8SL8-18
SS-FM8SL8SL8-48
SS-FM12SL12SL12-18
SS-FM12SL12SL12-48
SS-FM16SL16SL16-24
SS-FM16SL16SL16-60
Live
Length
L
in. (cm)
8.12 (20.6)
32.1 (81.5)
14.0 (35.6)
32.0 (81.3)
13.5 (34.3)
43.5 (110)
13.3 (33.8)
43.3 (110)
18.7 (47.5)
54.7 (139)
Dimensions
Minimum
Inside
Diameter
in. (mm)
0.19
(4.8)
0.28
(7.1)
0.41
(10.4)
0.66
(16.0)
0.88
(22.4)
Maximum
Outside
Dimension
in. (mm)
0.95 (24.1)
1.09 (27.7)
1.23 (31.3)
1.74 (44.2)
2.03 (51.6)
METAL
12
METAL
Nominal Tube
Hose Adapter
Size
Size
in.
in.
1/4
Overall
Length
OAL
in. (cm)
12.0 (30.5)
24.0 (61.0)
36.0 (91.4)
48.0 (122)
1/4
Live
Length
L
in. (cm)
8.48 (21.5)
20.5 (52.1)
32.5 (82.6)
44.5 (113)
Ordering
Number
SS-FM4TA4TA4-12
SS-FM4TA4TA4-24
SS-FM4TA4TA4-36
SS-FM4TA4TA4-48
Dimensions
Minimum
Inside
Diameter
in. (mm)
Maximum
Outside
Dimension
in. (mm)
0.16
0.75
(4.1)
(19.0)
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Typical Ordering Number
SS - FM 4 TA4 PM4 - 28 F
5
or
71CM-F
cm
in.
1 Material
4 End Connections
End Connections
SS = 316 stainless steel
2 Hose
4
6
8
12
=
=
=
=
1/4
3/8
1/2
3/4
16
20
24
32
=
=
=
=
1
1 1/4
1 1/2
2
6 Options
13
Tube
Nominal
Adapter
Hose Size
Size
Designator
Dimensions, in. (mm)
1/4
4
3/8
6
1/2
8
3/4
12
1
16
Dimensions, mm (in.)
6
4
10
6
12
8
End
Connection
Designator
A
1.76
1.82
2.22
2.35
2.69
TM6
TM10
TM12
44.4 (1.75)
47.0 (1.85)
57.2 (2.25)
4.1 (0.16)
7.1 (0.28)
8.9 (0.35)
19.0 (0.75)
23.5 (0.93)
26.7 (1.05)
End
Connection
Designator
Dimensions
Minimum
Inside
Diameter
Maximum
Outside
Dimension
SL4
SL6
SL6
SL8
SL10
SL12
SL16
SL20
SL24
SL32
1.94 (49.3)
2.00 (50.8)
2.02 (51.3)
2.24 (56.9)
2.27 (57.7)
2.35 (59.7)
2.64 (67.1)
4.04 (103)
4.75 (121)
5.72 (145)
SM6
SM8
SM10
SM12
30.2
50.3
51.6
59.7
(44.7)
(46.2)
(56.4)
(59.7)
(68.3)
Dimensions, mm (in.)
6
4
8
4
10
6
12
8
(1.19)
(1.98)
(2.03)
(2.35)
0.16
0.27
0.37
0.58
0.80
Maximum
Outside
Dimension
TA4
TA6
TA8
TA12
TA16
Dimensions
Minimum
Inside
Diameter
(4.1)
(6.9)
(9.4)
(14.7)
(20.3)
0.19 (4.8)
0.28 (7.1)
0.41
0.50
0.63
0.88
1.09
1.34
1.88
(10.4)
4.8
6.4
7.9
9.7
(0.19)
(12.7)
(16.0)
(22.4)
(27.7)
(34.0)
(47.8)
(0.25)
(0.31)
(0.38)
0.75
0.93
1.05
1.38
1.69
(19.0)
(23.6)
(26.7)
(35.1)
(42.9)
0.95
0.95
1.09
1.23
0.95
1.74
2.03
2.23
2.61
3.48
(24.1)
20.6
20.6
27.9
31.3
(0.81)
(24.1)
(27.7)
(31.3)
(24.1)
(44.2)
(51.6)
(58.9)
(66.3)
(88.4)
(0.81)
(1.10)
(1.23)
Furnished with silver-plated front ferrule and uncoated back ferrule which are required for performance
above 450F (232C).
Rotatable Male
VCR Metal Gasket
Face Seal Fittings
VCR
Size
in.
1/4
1/2
3/4
1
Nominal
Hose Size
Designator
4
8
12
16
End
Connection
Designator
RM4
RM8
RM12
RM16
A
2.60
2.83
4.19
4.80
(66.0)
(71.9)
(106)
(122)
METAL
End Connections
14
METAL
VCR
Size
in.
1/4
1/2
3/4
1
Nominal
Hose Size
Designator
4
8
12
16
End
Connection
Designator
RF4
RF8
RF12
RF16
2.00
2.16
4.15
4.76
VCO
Size
in.
1/4
1/2
Nominal
Hose Size
Designator
4
8
End
Connection
Designator
VF4
VF8
Swivel
Size
in.
1/4
3/8
1/2
Nominal
Hose Size
Designator
4
6
8
End
Connection
Designator
AS4
AS6
AS8
NPT
Size
in.
1/4
3/8
1/2
3/4
Nominal
Hose Size
Designator
4
6
8
12
End
Connection
Designator
PF4
PF6
PF8
PF12
A
(50.8)
(54.9)
(105)
(121)
A
1.81
1.87
2.18
2.21
(46.0)
(47.5)
(55.4)
(56.1)
15
NPT and
ISO/BSP
Tapered
Size
in.
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
Nominal
Hose Size
Designator
4
6
6
4
8
12
16
20
24
32
A
0.75 in.
(19.0 mm)
1/4
1/2
4
8
Tube
Butt Weld
Wall
Size
Thickness
in.
in.
1/4
0.035
3/8
0.035
1/2
0.049
3/4
0.049
1
0.065
End
Connection
Designator
PM4
PM4
PM6
PM8
PM8
PM12
PM16
PM20
PM24
PM32
A
NPT
1.80
1.81
1.81
1.99
2.15
2.22
2.54
2.06
2.47
2.92
(45.7)
(46.0)
(46.0)
(50.6)
(54.6)
(56.4)
(64.5)
(52.3)
(62.7)
(74.2)
ISO/BSP Tapered
MT4
1.80 (45.7)
MT8
2.16 (54.9)
Nominal
Hose Size
Designator
4
6
8
12
16
End
Connection
Designator
TB4
TB6
TB8
TB12
TB16
(46.0)
0.94 (23.9)
1.09 (27.7)
1.09 (27.7)
1.02 (25.8)
1.23 (31.3)
1.74 (44.2)
2.03 (51.6)
2.03 (51.6)
2.47 (62.6)
3.19 (81.0)
0.28 (7.1)
0.47 (11.9)
0.94 (23.9)
1.23 (31.3)
A
1.90
1.89
2.04
2.12
2.23
(48.3)
(48.0)
(51.8)
(53.8)
(56.6)
(7.1)
(7.1)
(9.7)
(11.9)
(11.9)
(16.0)
(22.4)
(27.7)
(34.0)
METAL
16
METAL
Features
General purpose all-metal hose.
304 SS braid
316L SS core
Weld
316 SS
end connections
Technical Data
Minimum Center Line
Bend Radius
in. (cm)
Working
Pressure at
325 to 300F
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
1600 (110)
6400 (440)
0.11 (0.16)
1470 (101)
5880 (405)
0.20 (0.30)
1110 (76.4)
4500 (310)
0.22 (0.33)
325 to 800
860 (59.2)
3440 (237)
0.37 (0.55)
(200 to 426)
680 (46.8)
2720 (187)
0.50 (0.74)
11.8 (30.0)
680 (46.8)
2720 (187)
0.61 (0.91)
3.90 (9.91)
13.4 (34.0)
520 (35.8)
2080 (143)
0.85 (1.26)
5.10 (13.0)
15.4 (39.1)
450 (31.0)
1800 (124)
1.10 (1.65)
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
1/4 (6.4)
0.25 (6.4)
0.47 (11.9)
1.00 (2.54)
4.33 (11.0)
3/8 (9.7)
0.38 (9.5)
0.68 (17.3)
1.20 (3.05)
5.91 (15.0)
1/2 (12.7)
0.50 (12.7)
0.81 (20.5)
1.50 (3.81)
6.50 (16.5)
3/4 (19.0)
0.75 (19.0)
1.20 (30.5)
2.10 (5.33)
8.86 (22.5)
1 (25.4)
1.00 (25.4)
1.50 (38.0)
2.70 (6.86)
10.2 (25.9)
1 1/4 (31.8)
1.25 (31.8)
1.80 (45.7)
3.10 (7.87)
1 1/2 (38.1)
1.50 (38.1)
2.13 (54.0)
2 (50.8)
2.00 (50.8)
2.66 (67.5)
Pressure-Temperature Ratings
Ratings are based on ASME Code for Pressure Piping B31.3, Process Piping.
Nominal Hose Size, in.
1/4
3/8
Temperature F (C)
1/2
3/4
1 1/4
1 1/2
1600
1488
1376
1296
700 (371)
750 (398)
800 (426)
(110)
(102)
(94.8)
(89.2)
1470
1367
1264
1191
(101)
(94.1)
(87.1)
(82.0)
1110
1032
955
899
(76.4)
(71.1)
(65.7)
(61.9)
860 (59.2)
800 (55.1)
740 (50.9)
697 (47.9)
680
632
585
551
855 (58.8)
833 (57.3)
821 (56.5)
662 (45.6)
645 (44.4)
636 (43.8)
524 (36.0)
510 (35.1)
503 (34.6)
(46.8)
(43.5)
(40.2)
(37.9)
680
632
585
551
(46.8)
(43.5)
(40.2)
(37.9)
520 (35.8)
484 (33.3)
447 (30.8)
421 (29.0)
450
419
387
365
524 (36.0)
510 (35.1)
503 (34.6)
400 (27.5)
390 (26.8)
385 (26.5)
347 (23.8)
338 (23.2)
333 (22.9)
(31.0)
(28.8)
(26.6)
(25.1)
17
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Typical Ordering Number
SS - FJ 4 TA4 PM4 -
28 F
in.
1 Material
4 End Connections
End Connections
SS = 316 stainless steel
2 Hose
4
6
8
12
=
=
=
=
1/4
3/8
1/2
3/4
16
20
24
32
=
=
=
=
1
1 1/4
1 1/2
2
5 Overall Length
5
or
71CM-F
cm
6 Options
METAL
18
METAL
End Connections
Swagelok Tube Adapters
End Connections
with Hex Flat
Preswaged
Nuts and Ferrules
Over 1 in. / 25 mm
Tube
Nominal
Adapter
Hose Size
Size
Designator
Dimensions, in. (mm)
1/4
4
3/8
6
1/2
8
3/4
12
1
16
1 1/4
20
1 1/2
24
2
32
End
Connection
Designator
Dimensions, mm (in.)
6
4
8
4
10
6
12
8
18
12
25
16
32
20
38
24
TA4
TA6
TA8
TA12
TA16
TA20
TA24
TA32
1.52
1.81
2.16
2.50
2.99
3.91
4.47
5.45
(38.6)
TM6
TM8
TM10
TM12
TM18
TM25
TM32
TM38
39.0
39.2
53.3
64.8
61.0
75.9
87.4
97.3
(1.54)
(46.0)
(54.9)
(63.5)
(75.9)
(99.3)
(114)
(138)
(1.54)
(2.10)
(2.55)
(2.40)
(2.99)
(3.44)
(3.83)
Dimensions
Minimum
Inside
Diameter
0.18
0.27
0.37
0.58
0.80
1.02
1.25
1.72
(4.6)
4.1
5.6
7.1
8.9
14.0
19.8
26.4
31.8
(0.16)
(6.9)
(9.4)
(14.7)
(20.3)
(25.9)
(31.8)
(43.7)
(0.22)
(0.28)
(0.35)
(0.55)
(0.78)
(1.04)
(1.25)
Maximum
Outside
Dimension
0.54
0.78
0.93
1.32
1.63
2.18
2.61
3.48
(13.7)
13.7
13.7
19.8
25.5
33.5
41.4
58.0
69.6
(0.54)
(19.8)
(23.6)
(33.5)
(41.4)
(55.2)
(66.3)
(88.4)
(0.54)
(0.78)
(1.00)
(1.32)
(1.63)
(2.28)
(2.74)
Furnished with nut, preswaged silver-plated front ferrule, and uncoated back ferrule which are required
for performance above 450F (232C).
Tube
Nominal
Fitting
Hose Size
Size
Designator
Dimensions, in. (mm)
1/4
4
3/8
6
1/2
8
3/4
12
1
16
1 1/4
20
1 1/2
24
2
32
End
Connection
Designator
Dimensions, mm (in.)
6
4
8
10
12
18
25
32
38
4
6
8
12
16
20
24
SL4
SL6
SL8
SL12
SL16
SL20
SL24
SL32
A
1.87
2.07
2.43
2.62
3.20
3.79
4.25
5.22
(47.5)
(52.6)
(61.7)
(66.6)
(81.3)
(96.3)
(108)
(133)
SM6
47.5 (1.87)
SM8
SM10
SM12
SM18
SM25
SM32
SM38
48.3
53.3
61.7
66.5
81.3
97.8
111
(1.90)
(2.10)
(2.43)
(2.62)
(3.20)
(3.85)
(4.36)
Dimensions
Minimum
Inside
Diameter
0.19
0.28
0.41
0.63
0.88
1.09
1.35
1.82
(4.8)
4.8
6.4
7.9
9.7
15.0
21.8
28.7
33.8
(0.19)
(7.1)
(10.4)
(16.0)
(22.4)
(27.7)
(34.3)
(46.2)
(0.25)
(0.31)
(0.38)
(0.59)
(0.86)
(1.13)
(1.33)
Maximum
Outside
Dimension
0.65
0.80
1.02
1.32
1.63
2.03
2.47
3.19
(16.6)
16.2
17.4
20.9
25.5
31.3
40.5
53.4
63.8
(0.64)
Furnished with silver-plated front ferrule and uncoated back ferrule which are required for
performance above 450F (232C).
(20.3)
(25.8)
(33.5)
(41.4)
(51.6)
(65.6)
(81.0)
(0.69)
(0.82)
(1.00)
(1.23)
(1.60)
(2.10)
(2.51)
19
Rotatable Male
VCR Metal Gasket
Face Seal Fittings
Rotatable Female
VCR Metal Gasket
Face Seal Fittings
VCR
Size
in.
1/4
1/2
3/4
1
Nominal
Hose Size
Designator
4
8
12
16
End
Connection
Designator
RM4
RM8
RM12
RM16
VCR
Size
in.
1/4
1/2
3/4
1
Nominal
Hose Size
Designator
4
8
12
16
End
Connection
Designator
RF4
RF8
RF12
RF16
VCO
Size
in.
1/4
1/2
3/4
1
Nominal
Hose Size
Designator
4
8
12
16
End
Connection
Designator
VF4
VF8
VF12
VF16
Swivel
Size
in.
1/4
3/8
1/2
3/4
1
Nominal
Hose Size
Designator
4
6
8
12
16
End
Connection
Designator
AS4
AS6
AS8
AS12
AS16
NPT
Size
in.
1/4
3/8
1/2
3/4
1
1 1/2
Nominal
Hose Size
Designator
4
6
8
12
16
24
End
Connection
Designator
PF4
PF6
PF8
PF12
PF16
PF24
A
1.69
2.00
2.63
2.97
(42.9)
(50.8)
(66.8)
(75.4)
A
1.69
2.00
2.63
2.97
(42.9)
(50.8)
(66.8)
(75.4)
A
1.15
1.31
1.57
1.73
(29.2)
(33.3)
(39.9)
(43.9)
A
1.55
1.79
1.95
2.27
2.64
(39.4)
(45.5)
(49.5)
(57.7)
(67.1)
A
1.60
1.84
2.45
2.41
2.92
3.28
(46.0)
(46.7)
(62.2)
(61.2)
(74.2)
(83.3)
METAL
20
METAL
NPT and
ISO/BSP
Tapered
Size
in.
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
A
0.75 in.
(19.0 mm)
Nominal
Hose Size
Designator
End
Connection
Designator
4
6
8
12
16
20
24
32
PM4
PM6
PM8
PM12
PM16
PM20
PM24
PM32
4
6
8
12
16
20
24
Tube
Butt Weld
Wall
Size
Thickness
in.
in.
1/4
0.035
3/8
0.035
1/2
0.049
3/4
0.049
1
0.065
A
NPT
1.70
1.91
2.32
2.45
3.05
3.14
3.38
3.63
(92.2)
0.28
0.38
0.47
0.63
0.88
1.09
1.34
1.81
ISO/BSP Tapered
MT4
1.70 (43.2)
MT6
1.91 (48.5)
MT8
2.32 (58.9)
MT12
2.45 (62.2)
MT16
3.05 (77.5)
MT20
3.14 (79.8)
MT24
3.38 (85.9)
0.28
0.38
0.47
0.63
0.88
1.09
1.34
(7.1)
Nominal
Hose Size
Designator
4
6
8
12
16
(43.2)
(48.5)
(58.9)
(62.2)
(77.5)
(79.8)
(85.9)
End
Connection
Designator
TB4
TB6
TB8
TB12
TB16
A
1.64
1.82
2.04
2.14
2.46
(41.7)
(46.2)
(51.8)
(54.4)
(62.5)
(9.7)
(11.9)
(16.0)
(22.4)
(27.7)
(34.0)
(46.0)
(9.7)
(11.9)
(16.0)
(22.4)
(27.7)
(34.0)
0.65 (16.6)
0.80 (20.3)
1.02 (25.8)
1.32 (33.5)
1.63 (41.4)
2.03 (51.6)
2.47 (62.6)
2.76 (70.0)
0.65
0.80
1.02
1.32
1.63
2.03
2.47
(16.6)
(20.3)
(25.8)
(33.5)
(41.4)
(51.6)
(62.6)
21
applications.
321 SS braid
316 SS
end connections
Weld
316L SS core
Technical Data
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
1/4 (6.4)
0.24 (6.1)
1/2 (12.7)
0.47 (11.9)
Working
Pressure at
325 to 100F
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
Static
Dynamic
Temperature
Range
F (C)
0.47 (11.9)
1.00 (2.54)
5.50 (14.0)
325 to 850
1500 (103)
6000 (413)
0.12 (0.18)
0.82 (20.8)
1.75 (4.45)
7.00 (17.8)
(200 to 454)
1200 (82.6)
4800 (330)
0.24 (0.36)
(200 to 37C)
Vacuum to ...
psig (bar)
Pressure-Temperature Ratings
Testing
(315)
(371)
(426)
(454)
1/4
1/2
Working Pressure
Vacuum to ... psig (bar)
1500
1260
1140
1050
975
(103)
(86.8)
(78.5)
(72.3)
(67.1)
1200
1008
912
840
780
(82.6)
(69.4)
(62.8)
(57.8)
(53.7)
930
885
855
840
(64.0)
(60.9)
(58.9)
(57.8)
744
708
684
672
(51.2)
(48.7)
(47.1)
(46.3)
METAL
Features
22
METAL
OAL
Nominal
Tube
Hose
Adapter
Size
Size
Dimensions, in.
1/4
1/4
1/2
1/2
Dimensions, mm
1/4 in.
1/2 in.
12
Overall
Length
OAL
in. (cm)
12.0 (30.5)
24.0 (61.0)
36.0 (91.4)
48.0 (122)
12.0 (30.5)
24.0 (61.0)
36.0 (91.4)
48.0 (122)
SS-FL4TA4TA4-12
SS-FL4TA4TA4-24
SS-FL4TA4TA4-36
SS-FL4TA4TA4-48
SS-FL8TA8TA8-12
SS-FL8TA8TA8-24
SS-FL8TA8TA8-36
SS-FL8TA8TA8-48
Live
Length
L
in. (cm)
8.48 (21.5)
20.5 (52.1)
32.5 (82.6)
44.5 (113)
7.50 (19.0)
19.5 (49.5)
31.5 (80.0)
43.5 (110)
cm (in.)
50.0 (19.7)
100 (39.4)
150 (59.1)
50.0 (19.7)
100 (39.4)
150 (59.1)
SS-FL4TM6TM6-50CM
SS-FL4TM6TM6-100CM
SS-FL4TM6TM6-150CM
SS-FL8TM12TM12-50CM
SS-FL8TM12TM12-100CM
SS-FL8TM12TM12-150CM
cm (in.)
41.1 (16.2)
91.2 (35.9)
141 (55.6)
38.6 (15.2)
88.6 (34.9)
139 (54.7)
Ordering
Number
Dimensions
Minimum
Maximum
Inside
Outside
Diameter
Dimension
in. (mm)
0.16
0.66
(4.1)
(16.8)
0.37
1.01
(9.4)
(25.7)
mm (in.)
4.1
16.8
(0.16)
(0.66)
8.9
25.7
(0.35)
(1.01)
23
SS - FL 4 TA4 PM4 - 28 F
in.
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables below.
2 Hose
4 = 1/4
8 = 1/2
5 Overall Length
5
or
71CM-F
cm
6 Options
For multiple options, add designators in
alphanumeric order with a dash between
each designator. For hose lengths
specified in centimeters, insert a dash as
shown prior to the first option designator.
CRN = Lanyard tag with CRN
F = Fire jacket
F1 = Thermosleeve
H7 =Helium leak test (1 107 std
cm3/s)
N3 = Nitrogen pressure test
T = Lanyard tag
T2 = Two lanyard tags
W = Hydrostatic test
End Connections
Swagelok Tube Adapters
Tube
Nominal
Adapter
Hose Size
Size
Designator
Dimensions, in. (mm)
1/4
4
4
3/8
8
1/2
8
Dimensions, mm (in.)
6
4
8
4
4
10
8
12
8
Tube
Nominal
Fitting
Hose Size
Size
Designator
Dimensions, in. (mm)
1/4
4
3/8
8
1/2
8
Dimensions, mm (in.)
6
4
10
8
12
8
End
Connection
Designator
Minimum
Inside
Diameter
Maximum
Outside
Dimension
0.16 (4.1)
0.66
0.66
1.01
1.01
TA4
TA6
TA6
TA8
1.76
1.79
2.03
2.25
(44.7)
TM6
TM8
TM10
TM10
TM12
44.4
45.2
45.2
51.3
57.4
(1.75)
(45.5)
(51.6)
(57.2)
0.27 (6.9)
0.37 (9.4)
(16.8)
(25.7)
(25.7)
8.9 (0.35)
16.8 (0.66)
16.8 (0.66)
16.8 (0.66)
25.7 (1.01)
25.7 (1.01)
Minimum
Inside
Diameter
Maximum
Outside
Dimension
SL4
SL6
SL8
1.94 (49.3)
2.22 (56.4)
2.33 (59.2)
0.19 (4.8)
0.28 (7.1)
0.41 (10.4)
0.80 (20.3)
1.23 (31.3)
1.23 (31.3)
SM6
SM10
SM12
49.3 (1.94)
56.4 (2.22)
59.2 (2.33)
4.8 (0.19)
7.9 (0.31)
9.7 (0.38)
20.3 (0.80)
31.3 (1.23)
31.3 (1.23)
End
Connection
Designator
(1.78)
(1.78)
(2.02)
(2.26)
4.1 (0.16)
5.6 (0.22)
(16.8)
7.1 (0.28)
24
METAL
Nominal
Hose Size
Designator
4
8
End
Connection
Designator
RM4
RM8
Minimum
Inside
Diameter
0.18 (4.6)
0.40 (10.2)
Maximum
Outside
Dimension
0.73 (18.4)
1.09 (27.7)
A
2.60 (66.0)
2.88 (73.2)
VCR
Size
in.
1/4
1/2
Nominal
Hose Size
Designator
4
8
End
Connection
Designator
RF4
RF8
VCO
Size
in.
1/4
Nominal
Hose Size
Designator
4
End
Connection
Designator
VF4
1/2
NPT and
ISO/BSP
Tapered
Size
in.
Nominal
Hose Size
Designator
End
Connection
Designator
1/4
3/8
1/2
4
8
8
PM4
PM6
PM8
1/4
1/2
4
8
MT4
MT8
Rotatable Female
VCR Metal Gasket
Face Seal Fittings
A
0.75 in.
(19.0 mm)
Tube
Butt Weld
Wall
Size
Thickness
in.
in.
1/4
0.035
1/2
0.049
VF8
Nominal
Hose Size
Designator
4
8
A
NPT
1.80 (45.7)
2.02 (51.3)
2.21 (56.1)
ISO/BSP Tapered
1.80 (45.7)
2.21 (56.1)
End
Connection
Designator
TB4
TB8
0.80 (20.3)
1.23 (31.3)
1.23 (31.3)
0.28 (7.1)
0.47 (11.9)
0.80 (20.3)
1.23 (31.3)
25
up to 100psig (6.8bar).
321 SS cuff
Weld
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Working
Nominal
Temperature
Pressure
Tubing Wall
Range
109 torr to ... Thickness
F (C)
psig(bar)
in. (mm)
100 (6.8)
Form-fit-and-stay
Tubing
Weight
lb/ft (kg/m)
1/4
0.25 (6.4)
0.38 (9.5)
0.04 (0.06)
3/8
0.38 (9.5)
0.58 (14.7)
1/2
0.50 (12.7)
0.71 (17.9)
70 to 1000
3/4
0.75 (19.0)
1.08 (27.4)
(20 to 537)
1.00 (25.4)
1.36 (34.5)
0.23 (0.34)
1 1/2
1.50 (38.1)
1.92 (48.7)
0.34 (0.51)
0.07 (0.10)
0.006 (0.15)
25 (1.7)
Material
316 SS
316 SS
XBA adapter
XOA adapter
304 SS
Temperature
Range
F (C)
70 to 1000
(20 to 537)
70 to 400
(20 to 537)
70 to 400
(20 to 204)
0.19 (0.28)
Testing
Availability
Factory welded
(20 to 204)
70 to 1000
0.09 (0.13)
Factory welded or
field assembly
Field assembly
METAL
Features
26
METAL
T
L
Nominal
Tube
Size
T
in.
1/4
3/8
1/2
3/4
1 1/2
Ordering
Number
321-4-X-2
321-4-X-4
321-4-X-6
321-4-X-12
321-4-X-24
321-6-X-1
321-6-X-3
321-6-X-6
321-6-X-12
321-6-X-24
321-8-X-1
321-8-X-3
321-8-X-6
321-8-X-12
321-8-X-24
321-8-X-36
321-12-X-1
321-12-X-3
321-12-X-6
321-12-X-12
321-12-X-24
321-12-X-36
321-16-X-1
321-16-X-3
321-16-X-6
321-16-X-12
321-16-X-24
321-16-X-36
321-24-X-1
321-24-X-3
321-24-X-6
321-24-X-12
321-24-X-24
321-24-X-36
Cuff
Length
A
Maximum
Outside
Diameter
B
0.75
0.38
(19.0)
(9.7)
0.75
0.58
(19.0)
(14.7)
1.00
0.71
(25.4)
(18.0)
1.00
1.08
(25.4)
(27.4)
1.00
1.36
(25.4)
(34.5)
1.00
1.92
(25.4)
(48.8)
Live Length, L
Compressed
1.50 (38.1)
3.25 (82.6)
4.75 (121)
9.00 (229)
18.0 (457)
0.75 (19.0)
2.50 (63.5)
4.75 (121)
9.00 (229)
18.0 (457)
0.75 (19.0)
2.50 (63.5)
4.75 (121)
9.00 (229)
18.0 (457)
24.0 (610)
0.75 (19.0)
2.50 (63.5)
4.75 (121)
9.00 (229)
18.0 (457)
24.0 (610)
0.75 (19.0)
2.50 (63.5)
4.75 (121)
9.00 (229)
18.0 (457)
24.0 (610)
0.75 (19.0)
2.50 (63.5)
4.75 (121)
9.00 (229)
18.0 (457)
24.0 (610)
Manufactured
2.00 (50.8)
4.00 (102)
6.00 (152)
12.0 (305)
24.0 (610)
1.00 (25.4)
3.00 (76.2)
6.00 (152)
12.0 (305)
24.0 (610)
1.00 (25.4)
3.00 (76.2)
6.00 (152)
12.0 (305)
24.0 (610)
36.0 (914)
1.00 (25.4)
3.00 (76.2)
6.00 (152)
12.0 (305)
24.0 (610)
36.0 (914)
1.00 (25.4)
3.00 (76.2)
6.00 (152)
12.0 (305)
24.0 (610)
36.0 (914)
1.00 (25.4)
3.00 (76.2)
6.00 (152)
12.0 (305)
24.0 (610)
36.0 (914)
Extended
3.00 (76.2)
6.00 (152)
9.00 (229)
18.0 (457)
36.0 (914)
1.50 (38.1)
4.50 (114)
9.00 (229)
18.0 (457)
36.0 (914)
1.50 (38.1)
4.50 (114)
9.00 (229)
18.0 (457)
36.0 (914)
54.0 (1370)
1.50 (38.1)
4.50 (114)
9.00 (229)
18.0 (457)
36.0 (914)
54.0 (1370)
1.50 (38.1)
4.50 (114)
9.00 (229)
18.0 (457)
36.0 (914)
54.0 (1370)
1.50 (38.1)
4.50 (114)
9.00 (229)
18.0 (457)
36.0 (914)
54.0 (1370)
Maximum
Angular
Displacement
180
Angular displacement based on nominal live length, as manufactured. Angular displacement is not recommended for
applications involving pressure surges.
360
90
225
360
45
180
360
30
90
180
360
20
90
180
360
15
60
120
240
360
27
3 2 1 - 4 - X - 36 F M R - H L T
1 Material
Tubing
321 = 321 stainless steel
2 Tube OD, in.
4
6
8
12
16
24
=
=
=
=
=
=
1/4
3/8
1/2
3/4
1
1 1/2
3 Tubing
X = CT series convoluted metal tubing
6 Options
5 End Connections
XBA adapter
Female VCR
Male VCR
Female VCO
Male VCO
Second End
Connection
None
XBA adapter
Female VCR
Male VCR
Female VCO
None
Female VCR
Male VCR
Male VCO
None
Male VCR
None
Female VCO
Male VCR
Male VCO
None
Male VCO
Designator
-B1
-B2
FRB
MRB
FOB
FR
DFR
FMR
FRMO
MR
DMR
FO
DFO
FOMR
FMO
MO
DMO
METAL
Ordering Information
28
METAL
Rotatable Male
VCR Metal Gasket
Face Seal Fittings
VCR
Size
in.
1/4
3/8
1/2
VCR
Size
in.
1/4
3/8
1/2
VCO
Size
in.
1/4
3/8
1/2
VCO
Size
in.
1/4
3/8
1/2
XBA Adapters
Adapter
Size
in.
1/4
3/8
1/2
3/4
1
1 1/2
A
1.55
1.58
1.94
2.03
2.31
3.06
(39.4)
(40.1)
(49.3)
(51.6)
(58.7)
(77.7)
29
Brazing material
METAL
XBA Adapters
Ordering Information and Dimensions
Select an adapter ordering number.
XBA adapter
Convoluted
tubing ID
C T
0.25 in.
(6.4 mm)
vacuum tubing.
XBA adapters allow for connecting to socket and butt weld
T
in.
Ordering
Number
1/4
304-4-XBA
0.94 (23.9)
0.69 (17.5)
0.16 (4.1)
3/8
304-6-XBA
1.00 (25.4)
0.75 (19.0)
0.28 (7.1)
1/2
304-8-XBA
1.19 (30.2)
0.94 (23.9)
0.38 (9.7)
3/4
304-12-XBA
1.28 (32.5)
1.03 (26.2)
0.60 (15.2)
304-16-XBA
1.56 (39.6)
1.31 (33.3)
0.85 (21.6)
1 1/2
304-24-XBA
2.31 (58.7)
2.06 (52.3)
1.35 (34.3)
XOA Adapters
XOA adapter
Convoluted
tubing ID
C T
0.12 in.
reusable.
Material is 304 stainless steel.
(3.1 mm)
T
in.
Ordering
Number
1/4
304-4-XOA
3/8
304-6-XOA
1/2
304-8-XOA
3/4
304-12-XOA
304-16-XOA
1 1/2
304-24-XOA
C
0.16 (4.1)
0.28 (7.1)
0.38 (9.7)
1.00 (25.4)
0.60 (15.2)
0.85 (21.6)
1.35 (34.3)
30
FLUOROPOLYMER
177.1550 and 3-A for contact with water, food, and beverage.
for details.
PTFE core
Technical Data
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Minimum Inside
Bend Radius
in. (cm)
Outside
Diameter
in. (mm)
Static
Dynamic
Temperature
Range
F (C)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Working
Pressure at
70F (20C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
0.19 (4.8)
0.31 (7.9)
1.50 (3.81)
2.00 (5.08)
450 (230)
3000 (206)
12 000 (826)
0.08 (0.12)
3/8 (9.5)
0.31 (7.9)
0.44 (11.1)
3.50 (8.89)
5.00 (12.7)
450 (230)
2500 (172)
10 000 (689)
0.12 (0.17)
1/2 (12.7)
0.41 (10.3)
0.56 (14.3)
4.50 (11.4)
6.00 (15.2)
450 (230)
2000 (137)
8 000 (551)
0.15 (0.22)
3/4 (19.0)
0.63 (15.9)
0.81 (20.6)
6.00 (15.2)
7.50 (19.0)
450 (230)
1500 (103)
6 000 (413)
0.28 (0.41)
1 (25.4)
0.88 (22.2)
1.03 (26.2)
9.00 (22.9)
11.3 (28.7)
400 (204)
1000 (68.9)
4 000 (275)
0.39 (0.58)
450 (230)
1500 (103)
6 000 (413)
0.08 (0.12)
65 to 450
(53 to 230)
0.19 (4.8)
0.31 (7.9)
1.50 (3.81)
2.00 (5.08)
65 to 450
(53 to 230)
Pressure-Temperature Ratings
Testing
Braid Material
Nominal Hose Size
in.
Temperature F (C)
65 (53)
0 (17) to 100 (37)
200 (93)
300 (148)
400 (204)
450 (230)
304 SS
(TH and TC)
1/4
2250
3000
1740
1560
1440
1380
3/8
1/2
Alloy 400
(TL4)
3/4
1/4
31
OAL
Nominal
Tube
Hose
Adapter
Size
Size
Dimensions, in.
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
Dimensions, mm
1/4 in.
1/2 in.
12
Overall
Length
OAL
in. (cm)
8.00 (20.3)
14.0 (35.6)
20.0 (50.8)
26.0 (66.0)
38.0 (96.5)
50.0 (127)
62.0 (157)
74.0 (188)
122 (310)
14.0 (35.6)
20.0 (50.8)
26.0 (66.0)
38.0 (96.5)
50.0 (127)
62.0 (157)
74.0 (188)
14.5 (36.8)
26.5 (67.3)
38.5 (97.8)
50.5 (128)
62.5 (159)
74.5 (189)
26.5 (67.3)
38.5 (97.8)
39.5 (100)
51.5 (131)
SS-4BHT-6
SS-4BHT-12
SS-4BHT-18
SS-4BHT-24
SS-4BHT-36
SS-4BHT-48
SS-4BHT-60
SS-4BHT-72
SS-4BHT-120
SS-6BHT-12
SS-6BHT-18
SS-6BHT-24
SS-6BHT-36
SS-6BHT-48
SS-6BHT-60
SS-6BHT-72
SS-8BHT-12
SS-8BHT-24
SS-8BHT-36
SS-8BHT-48
SS-8BHT-60
SS-8BHT-72
SS-12BHT-24
SS-12BHT-36
SS-16BHT-36
SS-16BHT-48
Live
Length
L
in. (cm)
4.72 (12.0)
10.7 (27.2)
16.7 (42.4)
22.7 (57.7)
34.7 (88.1)
46.7 (119)
58.7 (149)
70.7 (180)
119 (302)
10.4 (26.4)
16.4 (41.7)
22.4 (56.9)
34.4 (87.4)
46.4 (118)
58.4 (148)
70.4 (179)
10.0 (25.4)
22.0 (55.9)
34.0 (86.4)
46.0 (117)
58.0 (147)
70.0 (178)
21.0 (53.3)
33.1 (84.1)
32.3 (82.0)
44.3 (113)
cm (in.)
35.6 (14.0)
66.0 (26.0)
96.5 (38.0)
67.3 (26.5)
97.8 (38.5)
SS-4MBHT-12
SS-4MBHT-24
SS-4MBHT-36
SS-8MBHT-24
SS-8MBHT-36
cm (in.)
27.2 (10.7)
57.6 (22.7)
88.1 (34.7)
54.2 (21.3)
84.7 (33.3)
Ordering
Number
Dimensions
Minimum
Maximum
Inside
Outside
Diameter
Dimension
in. (mm)
0.16
0.54
(4.1)
(13.7 )
0.27
0.73
(6.9)
(18.5)
0.36
0.86
(9.1)
(21.8)
0.53
1.04
(13.5)
(26.4)
0.80
1.36
(20.3)
(34.5)
mm (in.)
4.1
13.7
(0.16)
(0.54)
8.4
21.8
(0.33)
(0.86)
FLUOROPOLYMER
32
FLUOROPOLYMER
Dimensions
Nominal
Hose
Size
in.
VCO
Size
in.
1/4
1/4
1/2
1/2
Overall
Length
OAL
in. (cm)
13.5
(34.3)
(64.8)
25.5
37.5
(95.3)
13.5
(34.3)
(64.8)
25.5
37.5
(95.3)
49.5
(126)
Ordering
Number
SS-4BHO-12
SS-4BHO-24
SS-4BHO-36
SS-8BHO-12
SS-8BHO-24
SS-8BHO-36
SS-8BHO-48
Live
Length
L
in. (cm)
10.1 (25.7)
22.1 (56.1)
34.1 (86.6)
9.5 (24.1)
21.5 (54.6)
33.5 (85.1)
45.5
(116)
Minimum
Inside
Diameter
in. (mm)
Maximum
Outside
Dimension
in. (mm)
0.16
0.80
(4.1)
(20.3)
0.36
1.16
(9.1)
(29.5)
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Typical Ordering Number
SS - TH 4 TA4 SL2 - 28 Z
5
or
71CM-Z
cm
in.
1 Material
End Connections
SS = 316 stainless steel
C20 = Alloy 20
M = Alloy 400
INC = Alloy 600
HC = Alloy C-276
TI = Titanium, grade 4
2 Hose
TH =T series PTFE hose with 304 SS
braid
TC =T series carbon black-filled
PTFE hose with 304 SS braid
()
TL =T series PTFE hose with
alloy400 braid (1/4in. hose
size only)
4 End Connections
6 Options
4=
6=
8=
12 =
16 =
1/4
3/8
1/2
3/4
1
33
Tube
Nominal
Adapter
Hose Size
Size
Designator
Dimensions, in. (mm)
1/4
4
6
3/8
8
1/2
8
12
3/4
16
12
1
16
Dimensions, mm (in.)
6
4
8
4
10
6
12
8
18
12
25
16
VCO
Size
in.
1/4
End
Connection
Designator
Dimensions, mm (in.)
6
4
10
6
12
8
18
12
0.73 (18.5)
(9.1)
0.86
1.04
1.36
1.34
1.36
(21.8)
(0.16)
13.7
13.7
15.5
20.1
26.4
34.5
(0.54)
TM6
TM8
TM10
TM12
TM18
TM25
42.2 (1.66)
50.5 (1.99)
52.3 (2.06)
67.1 (2.64)
67.6 (2.66)
89.7 (3.53)
4.1
4.1
6.9
8.4
13.5
19.0
(41.7)
(44.2)
(59.4)
(57.4)
(69.1)
(84.6)
(74.4)
A
1.69
1.76
2.02
2.15
2.75
2.72
(42.9)
(44.7)
(51.3)
(54.6)
(69.9)
(69.1)
0.27 (6.9)
(91.7)
End
Connection
Designator
0.54 (13.7)
0.36
0.53
0.56
0.58
0.80
Tube
Nominal
Fitting
Hose Size
Size
Designator
Dimensions, in. (mm)
1/8
4
1/4
4
3/8
6
1/2
8
3/4
12
3/4
0.16 (4.1)
1.64
1.74
2.34
2.26
2.72
3.33
2.93
3.61
End
Connection
Designator
VF4
VF8
VF8
VF12
VF12
VF16
Maximum
Outside
Dimension
TA4
TA6
TA6
TA8
TA12
TA12
TA16
TA16
Nominal
Hose Size
Designator
4
6
8
12
16
16
1/2
Dimensions
Minimum
Inside
Diameter
SL2
SL4
SL6
SL8
SL12
1.93
1.97
2.20
2.50
2.81
(49.0)
SM6
SM10
SM12
SM18
50.0
57.2
63.5
71.4
(1.97)
(50.0)
(55.9)
(63.5)
(71.4)
(2.25)
(2.50)
(2.81)
(13.5)
(14.2)
(14.7)
(20.3)
(0.16)
(0.27)
(0.33)
(0.53)
(0.75)
(26.4)
(34.5)
(34.0)
(34.5)
(0.54)
(0.61)
(0.79)
(1.04)
(1.36)
Dimensions
Minimum
Inside
Diameter
0.09
0.16
0.27
0.36
0.58
(2.3)
4.1
6.9
9.1
14.7
(0.16)
(4.1)
(6.9)
(9.1)
(14.7)
(0.27)
(0.36)
(0.58)
Maximum
Outside
Dimension
0.65
0.65
0.87
1.09
1.31
(16.6)
16.6
22.1
27.6
33.1
(0.65)
(16.6)
(22.1)
(27.6)
(33.1)
(0.87)
(1.09)
(1.31)
FLUOROPOLYMER
End Connections
34
Female
NPT and
ISO/BSP
Tapered
Size
in.
1/4
FLUOROPOLYMER
3/8
1/2
3/4
1/4
1/2
Male
NPT and
ISO/BSP
Tapered
Size
in.
4
8
Nominal
Hose Size
Designator
PF4
PF4
PF6
PF8
PF12
End
Connection
Designator
(46.7)
(49.5)
(63.3)
(63.8)
A
NPT
1.88
1.91
2.17
1.91
2.17
2.39
2.41
2.41
3.00
3.26
0.16
0.27
0.27
0.36
0.58
(4.1)
(6.9)
(6.9)
(9.1)
(14.7)
0.16 (4.1)
0.36 (9.1)
(82.8)
ISO/BSP Tapered
MT4
1.88 (47.8)
MT8
2.39 (60.7)
MT12
2.41 (61.2)
MT16
3.26 (82.8)
0.16
0.36
0.58
0.80
(4.1)
VCR
Size
in.
1/4
1/2
3/4
1
Nominal
Hose Size
Designator
4
8
12
16
End
Connection
Designator
RF4
RF8
RF12
RF16
(47.8)
(48.5)
(55.1)
(48.5)
(55.1)
(60.7)
(61.2)
(61.2)
(76.2)
A
1.84
2.24
2.46
3.39
(46.7)
(56.9)
(62.5)
(86.1)
0.87 (22.1)
1.02 (25.8)
1.23 (31.3)
1.52 (38.7)
0.87 (22.1)
1.23 (31.3)
4
8
12
16
(47.8)
0.16
0.27
0.28
0.27
0.36
0.36
0.47
0.58
0.63
0.80
1/4
1/2
3/4
1
3/4
A
NPT
1.88
1.84
1.95
2.49
2.51
ISO/BSP Tapered
FT4
1.88 (47.8)
FT8
2.49 (63.3)
PM4
PM4
PM4
PM6
PM6
PM8
PM8
PM12
PM12
PM16
1/2
4
6
6
8
12
End
Connection
Designator
4
6
8
6
8
8
12
12
16
16
1/4
3/8
Nominal
Hose Size
Designator
(6.9)
0.80 (20.3)
(7.1)
(6.9)
(9.1)
(9.1)
(11.9)
(14.7)
(16.0)
(20.3)
(9.1)
(14.7)
(20.3)
0.80 (20.3)
1.02
1.23
1.23
1.31
1.60
(25.8)
0.80
1.02
1.23
1.60
(20.3)
(31.3)
(31.3)
(33.1)
(40.5)
(25.8)
(31.3)
(40.5)
35
A
PTFE hose image update with dimension
lines
AS
Sanitary Kwik-Clamps
JIC
Flare
Size
in.
1/4
3/8
1/2
Nominal
Hose Size
Designator
4
6
8
End
Connection
Designator
AN4
AN6
AN8
JIC
Swivel
Size
in.
1/4
3/8
1/2
Nominal
Hose Size
Designator
4
6
8
End
Connection
Designator
AS4
AS6
AS8
KwikClamp
Size
in.
1/2
3/4
1
1 1/2
Nominal
Hose Size
Designator
8
12
16
16
End
Connection
Designator
KC8
KC12
KC16
KC24
A
2.15
2.17
2.95
2.39
(54.6)
(55.1)
(74.9)
(60.7)
Working pressure and temperature ratings of hoses with sanitary Kwik-Clamp end connections may be
limited by the gasket material and clamp. Maximum pressure rating is 300 psig (20.6 bar).
FLUOROPOLYMER
36
FLUOROPOLYMER
for details.
304 SS braid
PTFE core
316 SS end
connections
Technical Data
Minimum Inside
Bend Radius
in. (cm)
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
1/8 (3.2)
0.125 (3.2)
0.25 (6.4)
1.50 (3.81)
3.75 (9.52)
Temperature
Range
F (C)
65 to 450
(53 to 230)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Working
Pressure at
65 to 450F
450 (230)
(53 to 230C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
3000 (206)
12 000 (826)
0.05 (0.07)
Pressure-Temperature Ratings
Temperature
F (C)
Working Pressure
psig (bar)
3000 (206)
Testing
37
SS - BT 2 TA2 PM2 - 28 MB
in.
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables on pages 52 to
60
2 Hose
BT = B series PTFE hose
2 = 1/8
5 Overall Length
5
or
71CM - MB
cm
6 Options
For multiple options, add designators in
alphanumeric order with a dash between
each designator. For hose lengths
specified in centimeters, insert a dash as
shown prior to the first option designator.
F = Fire jacket
Splices
SP1 = 1 splice
SP2 = 2 splices
Mat Tags
MA = Gray
MO = Orange
MB = Blue
MP = Purple
MC = Brown MR = Red
MG = Green MW = White
MK = Black MY = Yellow
MN = Pink
Other Tags
T = Lanyard tag
T2 = Two lanyard tags
Specify text for tags. see Hose Tag
Text table, page 84.
See page83 for detailed descriptions
of options.
FLUOROPOLYMER
Build a hose assembly ordering number by combining the designators in the sequence shown below.
38
FLUOROPOLYMER
for details.
304 SS braid
Fiber braid
PTFE core
316 SS
end connections
Technical Data
Nominal
Hose Size
in. (mm)
Minimum Inside
Bend Radius
in. (cm)
Working
Pressure at
70F (20C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
1/4 (6.4)
0.25 (6.4)
0.46 (11.7)
1.25 (3.18)
4.20 (10.7)
450 (230)
3500 (241)
14 000 (964)
0.13 (0.19)
3/8 (9.6)
0.38 (9.6)
0.57 (14.5)
1.75 (4.44)
4.40 (11.2)
450 (230)
3000 (206)
12 000 (826)
0.17 (0.25)
1/2 (12.7)
0.50 (12.7)
0.76 (19.3)
2.50 (6.35)
6.38 (16.2)
450 (230)
1800 (124)
7 200 (496)
0.24 (0.36)
3/4 (19.0)
0.75 (19.0)
1.00 (25.4)
3.50 (8.89)
4.55 (11.6)
200 (93)
1250 (86.1)
5 000 (344)
0.36 (0.54)
1.00 (25.4)
1.32 (33.5)
5.50 (14.0)
7.15 (18.2)
150 (65)
1000 (68.9)
4 000 (275)
1.1 (1.6)
1 (25.4)
Temperature
Range
F (C)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
65 to 450
(53 to 230)
Pressure-Temperature Ratings
Nominal Hose Size, in.
1/4
Temperature, F (C)
0 65 (53) to 100 (37)
200 (93)
300 (148)
400 (204)
450 (230)
3/8
1/2
3/4
(241)
(241)
(238)
(224)
(220)
3000
2345
1965
1810
1675
(206)
(161)
(135)
(124)
(115)
1800
1800
1790
1665
1665
(124)
(124)
(123)
(114)
(114)
1250
1135
1010
900
900
(86.1)
(78.2)
(69.5)
(62.0)
(62.0)
1000
1000
895
895
895
(68.9)
(68.9)
(61.6)
(61.6)
(61.6)
39
FLUOROPOLYMER
Testing
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
SS - XT 8
TA8 KC16 - 28 MB
5
or
71CM - MB
cm
in.
1 Material
4 End Connections
End Connections
SS = 316 stainless steel
2 Hose
XT = X series PTFE hose
XC =X series carbon black-filled
PTFE hose ()
4=
6=
8=
12 =
16 =
1/4
3/8
1/2
3/4
1
5 Overall Length
hose.
Longer assemblies may be spliced;
specify splices under Options. See
page 4 for more information about
splices.
6 Options
40
FLUOROPOLYMER
for details.
Silicone
cover
304 SS braid
Fiber braid
PTFE core
316 SS
end connections
Technical Data
Minimum Inside
Bend Radius
in. (cm)
Temperature
Range
F (C)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Working
Pressure at
70F (20C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
1/8 (3.2)
0.125 (3.2)
0.42 (10.7)
1.50 (3.81)
3.75 (9.52)
450 (230)
3000 (206)
12 000 (826)
0.09 (0.13)
1/4 (6.4)
0.25 (6.4)
0.55 (14.0)
1.25 (3.18)
4.20 (10.7)
450 (230)
3500 (241)
14 000 (964)
0.19 (0.28)
3/8 (9.6)
0.38 (9.6)
0.71 (18.0)
1.75 (4.44)
4.40 (11.2)
65 to 450
450 (230)
3000 (206)
12 000 (826)
0.25 (0.37)
1/2 (12.7)
0.50 (12.7)
0.86 (21.8)
2.50 (6.35)
4.55 (11.6)
(53 to 230)
450 (230)
1800 (124)
7 200 (496)
0.34 (0.51)
3/4 (19.0)
0.75 (19.0)
1.12 (28.4)
3.50 (8.89)
6.38 (16.2)
200 (93)
1250 (86.1)
5 000 (344)
0.47 (0.70)
1.55 (39.4)
5.50 (14.0)
7.15 (18.2)
150 (65)
1000 (68.9)
4 000 (275)
1.8 (2.7)
Pressure-Temperature Ratings
Nominal Hose Size, in.
1/8
1/4
Temperature, F (C)
0 65 (53) to 100 (37)
200 (93)
300 (148)
400 (204)
450 (230)
3/8
1/2
3/4
(206)
(206)
(179)
(175)
(140)
3500
3500
3435
3320
3320
(241)
(241)
(236)
(228)
(228)
3000
2650
2510
2495
2320
(206)
(182)
(172)
(171)
(159)
1800
1800
1800
1800
1800
(124)
(124)
(124)
(124)
(124)
1250
1250
1250
1250
1100
(86.1)
(86.1)
(86.1)
(86.1)
(75.7)
1000
1000
1000
1000
1000
(68.9)
(68.9)
(68.9)
(68.9)
(68.9)
41
Ordering Information
FLUOROPOLYMER
SS - ST 8
End Connections
SS = 316 stainless steel
2 Hose
2
4
6
8
12
16
=
=
=
=
=
=
TA8 KC16 - 28 PB
1 Material
in.
4 End Connections
hose.
Longer assemblies may be spliced;
specify splices under Options. See
page 4 for more information about
splices.
5
or
71CM - PB
cm
6 Options
42
for details.
316 SS
end connections
Technical Data
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
1/2
3/4
1
1 1/2
2
0.50
0.75
1.00
1.50
2.00
0.76
1.00
1.32
2.03
2.46
(12.7)
(19.0)
(25.4)
(38.1)
(50.8)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
(12.7)
(19.0)
(25.4)
(38.1)
(50.8)
0.50 (12.7)
0.75 (19.0)
1.00 (25.4)
(19.3)
(25.4)
(33.5)
(51.6)
(62.5)
0.88 (22.4)
1.12 (28.4)
1.47 (37.3)
Minimum Inside
Bend Radius
in. (cm)
Static
2.50
3.00
5.50
6.00
7.50
(6.35)
(7.62)
(14.0)
(15.2)
(19.0)
2.50 (6.35)
3.00 (7.62)
5.50 (14.0)
Temperature
Range
Dynamic
F (C)
Without Silicone Cover
3.75 (9.52)
65 to 450
3.90 (9.91)
(53 to 230)
7.15 (18.2)
7.80 (19.8)
20 to 340
(28 to 171)
9.75 (24.8)
With Silicone Cover
3.75 (9.52)
65 to 450
3.90 (9.91)
(53 to 230)
7.15 (18.2)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Working
Burst
Pressure
Pressure
at 70F (20C) at 70F (20C)
psig (bar)
psig (bar)
450 (230)
450 (230)
200 (93)
150 (65)
1500
1100
750
700
525
450 (230)
450 (230)
200 (93)
1500 (103)
1100 (75.7)
750 (51.6)
(103)
(75.7)
(51.6)
(48.2)
(36.1)
6000
4400
3000
2800
2100
(144)
0.20 (0.30)
0.28 (0.42)
0.47 (0.70)
0.83 (1.2)
1.02 (1.5)
6000 (413)
4400 (303)
3000 (206)
0.28 (0.42)
0.40 (0.60)
0.72 (1.1)
(413)
(303)
(206)
(192)
Pressure-Temperature Ratings
Without Silicone Cover
Hose Style
Nominal Hose Size, in.
1/2
3/4
Temperature, F (C)
65 (53)
20 (28)
0 (17) to 100 (37)
200 (93)
300
340
400
450
(148)
(171)
(204)
(230)
1 1/2
1/2
3/4
(103)
(103)
(103)
(103)
1100
1100
1100
1100
(75.7)
(75.7)
(75.7)
(75.7)
750
750
750
700
(51.6)
(51.6)
(51.6)
(48.2)
675 (46.5)
700 (48.2)
435 (29.9)
525 (36.1)
525 (36.1)
525 (36.1)
1500
1500
1500
1500
(103)
(103)
(103)
(103)
1100 (75.7)
1100 (75.7)
1100 (75.7)
1100 (75.7)
750
750
750
750
(51.6)
(51.6)
(51.6)
(51.6)
1500
1500
1500
1500
(103)
(103)
(103)
(103)
1100
1030
960
900
(75.7)
(70.9)
(66.1)
(62.0)
620
600
565
490
(42.7)
(41.3)
(38.9)
(33.7)
405 (27.9)
330 (22.7)
495 (34.1)
485 (33.4)
1500
1500
1500
1485
(103)
(103)
(103)
(102)
1095
1075
1050
925
620
595
555
405
(42.7)
(40.9)
(38.2)
(27.7)
Hose with carbon black-filled PTFE core (CC series) is limited to 20 to 340F (28 to 171C).
(75.4)
(74.0)
(72.3)
(63.7)
Bulk
Hose
Weight
lb/ft (kg/m)
43
FLUOROPOLYMER
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
SS - CT 8
TA8 KC16 - 28 MB
in.
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables on pages 52 to
60.
2 Hose
CT = C series convoluted PTFE hose
CC = C series convoluted, carbon
black-filled PTFE hose (1 1/2 and
2 in. sizes only) ()
JT = C series convoluted PTFE hose
with silicone cover (1/2, 3/4, and
1 in. sizes only)
8
12
16
24
32
=
=
=
=
=
1/2
3/4
1
1 1/2
2
5 Overall Length
hose
300in. or 762cm for 11/2 and 2in.
hose.
Longer assemblies may be spliced;
specify splices under Options. See
page 4 for more information about
splices.
5
or
71CM -MB
cm
6 Options
For multiple options, add designators in
alphanumeric order with a dash between
each designator. For hose lengths
specified in centimeters, insert a dash as
shown prior to the first option designator.
A = Armor guard
F = Fire jacket
G6 = Spiral guard, black
G7 = Spiral guard, blue
G8 = Spiral guard, yellow
Splices
SP1 = 1 splice
SP2 = 2 splices
Mat Tags
MA = Gray
MO = Orange
MB = Blue
MP = Purple
MC = Brown MR = Red
MG = Green MW = White
MK = Black MY = Yellow
MN = Pink
Other Tags
T = Lanyard tag
T2 = Two lanyard tags
Specify text for tags. see Hose Tag
Text table, page 84.
See page83 for detailed descriptions
of options.
44
FLUOROPOLYMER
Insulating wrap
for details.
Convoluted bore,
carbon black-filled PTFE core
316 SS
end connections
Technical Data
Minimum Inside
Bend Radius
in. (cm)
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
3/8 (9.6)
0.41 (10.4)
0.73 (18.5)
2.50 (6.35)
4.00 (10.2)
1/2 (12.7)
0.53 (13.5)
0.86 (21.8)
3.50 (8.89)
5.25 (13.3)
3/4 (19.0)
0.75 (19.0)
1.12 (28.4)
4.50 (11.4)
5.85 (14.9)
Static
Dynamic
Pressure-Temperature Ratings
Nominal Hose Size, in.
Temperature, F (C)
65 (53)
0 (17) to 100 (37)
200 (93)
300 (148)
400 (204)
450 (230)
3/8
Working
1250 (86.1)
1250 (86.1)
500 (34.4)
365 (25.1)
165 (11.3)
140 (9.6)
1/2
Pressure,
720 (49.6)
750 (51.6)
340 (23.4)
235 (16.1)
160 (11.0)
130 (8.9)
3/4
psig (bar)
375 (25.8)
375 (25.8)
275 (18.9)
165 (11.3)
85.0 (5.8)
80.0 (5.5)
Temperature
Range
F (C)
65 to 450
(53 to 230)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Working
Pressure at
70F (20C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
450 (230)
1250 (86.1)
5000 (344)
0.12 (0.18)
400 (204)
750 (51.6)
3000 (206)
0.15 (0.22)
375 (25.8)
1500 (103)
0.19 (0.28)
45
Testing
FLUOROPOLYMER
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
SS - NC 8 TA8 KC16 - 28 MB
5
or
71CM - MB
in.
1 Material
4 End Connections
End Connections
SS = 316 stainless steel
2 Hose
NC =N series convoluted-bore,
carbon black-filled PTFE hose
with insulating wrap ()
6 = 3/8
8 = 1/2
12 = 3/4
5 Overall Length
6
cm
6 Options
46
FLUOROPOLYMER
for details.
Silicone
cover
Insulating wrap
304 SS braid
Fiber braid
316 SS
end connections
Technical Data
Minimum Inside
Bend Radius
in. (cm)
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
3/8 (9.6)
0.35 (8.9)
0.75 (19.0)
2.75 (6.98)
4.40 (11.2)
1/2 (12.7)
0.50 (12.7)
0.92 (23.4)
4.25 (10.8)
6.38 (16.2)
3/4 (19.0)
0.75 (19.0)
1.19 (30.2)
6.75 (17.1)
8.00 (20.3)
Pressure-Temperature Ratings
Nominal Hose Size, in.
Temperature, F (C)
65 (53) to 450 (230)
3/8, 1/2
3/4
500 (34.4)
Temperature
Range
F (C)
65 to 450
(53 to 230)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Working
Pressure at
70F (20C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
450 (230)
750 (51.6)
3000 (206)
0.29 (0.43)
200 (93)
750 (51.6)
3000 (206)
0.35 (0.52)
500 (34.4)
2000 (137)
0.50 (0.74)
47
Ordering Information
FLUOROPOLYMER
SS - WC 8
5
or
71CM-BL PG
cm
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables on pages 52 to
60.
7 Options
For multiple options, add designators
in alphanumeric order with a dash
between each designator.
2 Hose
WC =W series carbon black-filled
PTFE hose with silicone-cover
and insulating wrap ()
A = Armor guard
F = Fire jacket
G6 = Spiral guard, black
G7 = Spiral guard, blue
G8 = Spiral guard, yellow
Splices
SP1 = 1 splice
SP2 = 2 splices
Mat Tags
MA = Gray
MO = Orange
MB = Blue
MP = Purple
MC = Brown MR = Red
MG = Green MW = White
MK = Black MY = Yellow
MN = Pink
Perma Tags
PA = Gray
PO = Orange
PB = Blue
PP = Purple
PC = Brown
PR = Red
PG = Green
PW = White
PK = Black PY = Yellow
PN = Pink
Other Tags
T = Lanyard tag
T2 = Two lanyard tags
6 = 3/8
8 = 1/2
12 = 3/4
5 Overall Length
Inches or centimeters, in whole
numbers. Include CM as shown for
centimeter lengths.
48
for details.
FLUOROPOLYMER
Fiber braid
PTFE core
316 SS
end connections
Technical Data
Minimum Inside
Bend Radius
in. (cm)
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
1/4 (6.4)
0.25 (6.4)
0.41 (10.4)
2.75 (6.99)
5.50 (14.0)
3/8 (9.6)
0.38 (9.6)
0.55 (14.0)
3.25 (8.26)
5.20 (13.2)
1/2 (12.7)
0.50 (12.7)
0.70 (17.8)
5.25 (13.3)
7.88 (20.0)
3/4 (19.0)
0.75 (19.0)
0.94 (23.9)
6.50 (16.5)
8.45 (21.5)
Working
Pressure at
70F (20C)
psig (bar)
Burst
Pressure at
70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
800 (55.1)
3200 (220)
0.06 (0.09)
65 to 450
650 (44.7)
2600 (179)
0.09 (0.13)
(53 to 230)
450 (31.0)
1800 (124)
0.13 (0.19)
325 (22.4)
1300 (89.6)
0.18 (0.27)
Temperature
Range
F (C)
Pressure-Temperature Ratings
Nominal Hose Size, in.
Temperature, F (C)
65 (53)
0 (17) to 100 (37)
200 (93)
300 (148)
400 (204)
450 (230)
1/4
455
800
700
330
160
160
3/8
1/2
3/4
325
325
185
175
175
160
(22.3)
(22.3)
(12.7)
(12.0)
(12.0)
(11.0)
49
Testing
FLUOROPOLYMER
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
SS - FT 8 TA8 KC16 - 28 MB
in.
1 Material
4 End Connections
End Connections
SS = 316 stainless steel
2 Hose
FT = F series PTFE hose
FC =F series carbon black-filled
PTFE hose ()
4
6
8
12
=
=
=
=
1/4
3/8
1/2
3/4
5 Overall Length
5
or
71CM - MB
cm
6 Options
50
FLUOROPOLYMER
Silicone cover
for details.
PFA core
302 SS braid
316 SS
end connections
Technical Data
Minimum Inside
Bend Radius
in. (cm)
Vacuum
(28.5 in.Hg
[96.5 kPa])
Rated to ...
F (C)
Burst
Pressure at
Bulk
70F (20C) Hose Weight
psig (bar)
lb/ft (kg/m)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Static
Dynamic
1/2 (12.7)
0.50 (12.7)
0.80 (20.3)
1.50 (3.81)
4.50 (11.4)
400 (204)
300 (20.6)
1200 (82.6)
0.20 (0.30)
3/4 (19.0)
0.75 (19.0)
1.12 (28.6)
2.50 (6.35)
6.50 (16.5)
400 (204)
300 (20.6)
1200 (82.6)
0.38 (0.57)
250 (121)
250 (17.2)
1000 (68.9)
0.63 (0.94)
250 (121)
200 (13.7)
800 (55.1)
0.88 (1.3)
150 (65)
150 (10.3)
600 (41.3)
1.3 (1.9)
1 (25.4)
1.00 (25.4)
1.46 (37.0)
4.00 (10.2)
5.20 (13.2)
1 1/2 (38.1)
1.50 (38.1)
2.01 (51.1)
7.00 (17.8)
9.10 (23.1)
2 (50.8)
2.00 (50.8)
2.51 (63.8)
7.00 (17.8)
9.10 (23.1)
Temperature
Range
F (C)
Working
Pressure at
70F (20C)
psig (bar)
Nominal
Hose Size
in. (mm)
65 to 400
(53 to 204)
Pressure-Temperature Ratings
Nominal Hose Size, in.
1/2
Temperature, F (C)
65 (53)
0 (17) to 100 (37)
200 (93)
300 (148)
400 (204)
3/4
1 1/2
(13.7)
(20.6)
(19.2)
(14.4)
(11.0)
115
300
300
270
195
(7.9)
(20.6)
(20.6)
(18.6)
(13.4)
250
250
250
230
175
(17.2)
(17.2)
(17.2)
(15.8)
(12.0)
200
200
200
200
200
(13.7)
(13.7)
(13.7)
(13.7)
(13.7)
150
150
150
150
150
(10.3)
(10.3)
(10.3)
(10.3)
(10.3)
51
FLUOROPOLYMER
Ordering Information
Custom Hose Assemblies
Build a hose assembly ordering number by combining the designators in the sequence shown below.
SS - UT 8
TA8 KC16 - 28 PB
in.
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables on pages 52 to
60.
2 Hose
UT =U series PFA hose with silicone
cover
UC =U series carbon black-filled PFA
hose with silicone cover ()
8
12
16
24
32
=
=
=
=
=
1/2
3/4
1
1 1/2
2
5 Overall Length
hose
300in. or 762cm for 11/2 and 2in.
hose.
Longer assemblies may be spliced;
specify splices under Options. See
page 4 for more information about
splices.
5
or
71CM - PB
cm
6 Options
For multiple options, add designators in
alphanumeric order with a dash between
each designator. For hose lengths
specified in centimeters, insert a dash as
shown prior to the first option designator.
A = Armor guard
F = Fire jacket
G6 = Spiral guard, black
G7 = Spiral guard, blue
G8 = Spiral guard, yellow
Splices
SP1 = 1 splice
SP2 = 2 splices
Mat Tags
MA = Gray
MO = Orange
MB = Blue
MP = Purple
MC = Brown MR = Red
MG = Green MW = White
MK = Black MY = Yellow
MN = Pink
Perma Tags
PA = Gray
PO = Orange
PB = Blue
PP = Purple
PC = Brown
PR = Red
PG = Green
PW = White
PK = Black PY = Yellow
PN = Pink
Other Tags
T = Lanyard tag
T2 = Two lanyard tags
Specify text for tags. See Hose Tag
Text table, page 84.
See page83 for detailed descriptions
of options.
52
FLUOROPOLYMER
Over 1 in. / 25 mm
Tube
Nominal
Adapter
Hose Size
Size
Designator
Dimensions, in. (mm)
1/8
2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
Dimensions, mm (in.)
3
2
6
10
12
18
25
38
50
4
6
8
12
16
24
32
End
Connection
Designator
A
Max
TA2
1.86 (47.2)
TA4
TA6
TA8
TA12
TA16
TA24
TA32
1.96
2.42
2.91
3.53
3.78
5.22
6.82
(49.8)
(61.5)
(73.9)
(89.7)
(96.0)
(133)
(173)
TM3
47.8 (1.88)
TM6
TM10
TM12
TM18
TM25
TM38
TM50
50.3
62.0
74.4
90.2
96.5
133
173
(1.98)
(2.44)
(2.93)
(3.55)
(3.80)
(5.24)
(6.81)
Dimensions
Minimum
Inside
Diameter
0.070
(1.7)
0.16 (4.0)
0.26 (6.6)
0.34 (8.6)
0.54 (13.7)
0.78 (19.8)
1.24 (31.4)
1.68 (42.6)
1.7
4.0
6.6
8.6
13.7
19.8
31.4
42.6
(0.070)
(0.16)
(0.26)
(0.34)
(0.54)
(0.78)
(1.24)
(1.68)
Maximum
Outside
Dimension
0.55
0.59
0.82
1.04
1.35
1.75
2.20
2.74
(14.0)
14.0
15.0
20.8
23.1
34.3
44.5
55.9
69.6
(0.55)
Pressure
Rating
psig (bar)
(15.0)
(20.8)
(26.4)
(34.3)
Determined
by hose
(44.5)
(55.9)
(69.6)
(0.59)
(0.82)
(0.91)
(1.35)
Determined
by hose
(1.75)
(2.20)
(2.74)
Tube
Nominal
Fitting
Hose Size
Size
Designator
Dimensions, in. (mm)
1/8
2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
Dimensions, mm (in.)
3
2
6
10
12
18
25
38
50
4
6
8
12
16
24
32
End
Connection
Designator
A
Max
SL2
1.88 (47.8)
SL4
SL6
SL8
SL12
SL16
SL24
SL32
2.02
2.48
2.81
3.44
3.61
5.12
6.72
(51.3)
(63.0)
(71.4)
(87.4)
(91.7)
(130)
(171)
SM3
48.5 (1.91)
SM6
SM10
SM12
SM18
SM25
SM38
SM50
51.3
64.5
71.9
78.0
91.7
133
169
(2.02)
(2.54)
(2.83)
(3.07)
(3.61)
(5.24)
(6.65)
Dimensions
Minimum
Inside
Diameter
0.070
(1.7)
0.16 (4.0)
0.26 (6.6)
0.34 (8.6)
0.54 (13.7)
0.78 (19.8)
1.24 (31.4)
1.68 (42.6)
1.7
4.0
6.6
8.6
13.7
19.8
31.4
42.6
(0.070)
(0.16)
(0.26)
(0.34)
(0.54)
(0.78)
(1.24)
(1.68)
Maximum
Outside
Dimension
0.55
0.59
0.82
1.04
1.35
1.75
2.46
3.18
(14.0)
14.0
16.3
20.8
26.4
34.3
44.5
63.5
80.8
(0.55)
Pressure
Rating
psig (bar)
(15.0)
(20.8)
(26.4)
(34.3)
Determined
by hose
(44.5)
(62.5)
(80.8)
(0.64)
(0.82)
(1.04)
(1.35)
(1.75)
(2.50)
(3.18)
Determined
by hose
53
NPT
Size
in.
1/8
Nominal
Hose Size
Designator
2
End
Connection
Designator
PF2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
PF4
PF6
PF8
PF12
PF16
PF24
PF32
NPT
with JIC
Union
Size
in.
1/8
Nominal
Hose Size
Designator
2
End
Connection
Designator
FU2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
FU4
FU6
FU8
FU12
FU16
FU24
FU32
NPT
Size
in.
1/8
Nominal
Hose Size
Designator
2
End
Connection
Designator
PM2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
PM4
PM6
PM8
PM12
PM16
PM24
PM32
NPT
with JIC
Union
Size
in.
1/8
Nominal
Hose Size
Designator
2
End
Connection
Designator
MU2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
MU4
MU6
MU8
MU12
MU16
MU24
MU32
A
Max
1.76 (44.7)
1.85
2.31
2.66
3.32
3.44
4.19
4.88
(47.0)
(58.7)
(67.6)
(84.3)
(87.4)
(106)
(124)
A
Max
2.38 (60.5)
2.61
3.07
3.59
4.47
4.77
6.12
7.05
(66.3)
(78.0)
(91.2)
(114)
(121)
(155)
(179)
A
Max
1.70 (43.2)
1.91
2.31
2.72
3.26
3.45
4.24
5.12
(48.5)
(58.7)
(69.1)
(82.8)
(87.6)
(108)
(130)
A
Max
2.37 (60.2)
2.70
3.19
3.71
4.52
4.75
5.88
7.08
(68.6)
(81.0)
(94.2)
(115)
(121)
(149)
(180)
Pressure
Rating
psig (bar)
Determined
by hose
FLUOROPOLYMER
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
54
B
A
KwikClamp
Size
in.
1/2
FLUOROPOLYMER
3/4
1 1/2
2 1/2
Nominal
Hose Size
Designator
4
6
8
6
8
12
8
12
16
8
12
16
24
32
16
24
32
24
32
End Connection
Designator
Standard
Surface
KC8
KC8
KC8
KC12
KC12
KC12
KC16
KC16
KC16
KC24
KC24
KC24
KC24
KC24
KC32
KC32
KC32
KC40
KC40
Electropolished
KE8
KE8
KE8
KE12
KE12
KE12
KE16
KE16
KE16
KE24
KE24
KE24
KE24
KE24
KE32
KE32
KE32
KE40
KE40
Pressure
Rating
psig (bar)
1500 (103)
1500 (103)
500 (34.4)
500 (34.4)
450 (31.0)
400 (27.5)
The B dimension is also the maximum outside dimension of the hose assembly.
Hose assembly maximum outside dimension is 1.33 in. (33.8 mm).
Sanitary Kwik-Clamp
90 Elbows
C
KwikClamp
Size
in.
1/2
End Connection
Designator
Nominal
Hose Size Standard ElectroDesignator Surface polished
8
KR8
RE8
A
Max
2.92 (74.2)
0.34 (8.6)
0.98 (25.0)
Pressure
Rating
psig (bar)
1500 (103)
3/4
12
KR12
RE12
3.45 (87.6)
1.63 (41.4)
16
KR16
RE16
4.10 (104)
2.02 (51.3)
500 (34.4)
1 1/2
24
KR24
RE24
5.90 (150)
2.77 (70.4)
500 (34.4)
32
KR32
RE32
7.56 (192)
3.51 (89.2)
450 (31.0)
The C dimension is also the maximum outside dimension of the hose assembly.
Hose assembly maximum outside dimension is 1.33 in. (33.8 mm).
Sanitary Kwik-Clamp
45 Elbows
C
KwikClamp
Size
in.
End Connection
Designator
Nominal
Hose Size Standard ElectroDesignator Surface polished
A
Max
Pressure
Rating
psig (bar)
1/2
KA8
AE8
3.05 (77.5)
0.70 (17.8)
0.34 (8.6)
3/4
12
KA12
AE12
3.85 (97.8)
0.69 (17.6)
0.98 (25.0)
1500 (103)
16
KA16
AE16
4.02 (102)
0.81 (20.5)
500 (34.4)
1 1/2
24
KA24
AE24
5.60 (142)
1.03 (26.2)
500 (34.4)
32
KA32
AE32
7.03 (179)
1.27 (32.3)
450 (31.0)
The C dimension is also the maximum outside dimension of the hose assembly.
Hose assembly maximum outside dimension is 1.33 in. (33.8 mm).
55
Tube
Butt
Weld
Size
in.
1/2
3/4
Wall
Thickness
in.
0.049
0.049
Nominal
Hose Size
Designator
8
12
1
1 1/2
2
0.065
0.095
0.109
16
24
32
SAE 37
(JIC)
Female
Swivel
Size
in.
1/8
Nominal
Hose Size
Designator
2
End
Connection
Designator
AS2
1/4
3/8
1/2
3/4
1
1 1/2
2
4
6
8
12
16
24
32
AS4
AS6
AS8
AS12
AS16
AS24
AS32
Female
Cam and
Groove
Size
in.
3/4
1
1 1/2
2
Nominal
Hose Size
Designator
12
16
24
32
End
Connection
Designator
GF12
GF16
GF24
GF32
End
Connection
Designator
TB8
TB12
TB16
TB24
TB32
(117)
A
Max
4.03 (102)
4.53 (115)
5.39 (137)
6.30 (160)
A
Max
1.43 (36.3)
1.57
1.97
2.28
2.92
2.93
3.72
4.61
(39.8)
(50.0)
(57.9)
(74.2)
(74.4)
(94.5)
Pressure
Rating
psig (bar)
Determined
by hose
FLUOROPOLYMER
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
250 (17.2)
Male
Cam and
Groove
Size
in.
3/4
1
1 1/2
2
Nominal
Hose Size
Designator
12
16
24
32
End
Connection
Designator
GM12
GM16
GM24
GM32
A
Max
2.92 (74.2)
3.54 (89.9)
4.40 (112)
5.15 (131)
Pressure
Rating
psig (bar)
250 (17.2)
56
Tube
Nominal
Stub
Wall
Hose Size
Size
Thickness Designator
Dimensions, in. (mm)
1/8
0.035
2
FLUOROPOLYMER
1/4
3/8
1/2
3/4
1
1 1/2
2
0.035
0.049
0.065
0.075
0.095
0.134
0.188
Dimensions, mm (in.)
3
0.80
6
8
8
10
12
12
18
25
38
50
0.80
1.8
0.90
1.3
2.0
1.5
2.0
2.5
3.5
5.0
End
Connection
Designator
4
6
8
12
16
24
32
A
Max
TN2
1.84 (46.7)
TN4
TN6
TN8
TN12
TN16
TN24
TN32
1.94
2.37
2.88
3.47
3.65
4.97
6.32
(49.3)
(60.2)
(73.2)
(88.1)
(92.7)
(126)
(161)
TE3
38.6 (1.52)
4
4
6
6
6
8
12
16
24
32
TE6
TE8
TE8
TE10
TE12
TE12
TE18
TE25
TE38
TE50
40.1
40.1
56.9
58.4
64.3
72.9
85.6
94.0
118
148
VCO
Size
in.
1/4
Nominal
Hose Size
Designator
4
End
Connection
Designator
VF4
A
Max
1.67 (42.4)
1/2
3/4
1
8
12
16
VF8
VF12
VF16
2.18 (55.4)
2.79 (70.9)
2.67 (67.8)
VCR
Size
in.
1/4
Nominal
Hose Size
Designator
4
End
Connection
Designator
RF4
A
Max
1.76 (44.7)
1/2
3/4
1
8
12
16
RF8
RF12
RF16
2.37 (60.2)
3.08 (78.2)
3.20 (81.3)
(1.58)
(1.58)
(2.24)
(2.30)
(2.53)
(2.87)
(3.37)
(3.70)
(4.65)
(5.83)
Dimensions
Minimum
Inside
Diameter
0.050 (1.2)
0.17 (4.3)
0.27 (6.8)
0.34 (8.6)
0.59 (14.9)
0.80 (20.3)
1.22 (30.9)
1.62 (41.1)
1.3
4.3
5.3
6.1
7.1
7.9
8.9
13.7
19.6
30.7
39.9
(0.051)
(0.17)
(0.21)
(0.24)
(0.28)
(0.31)
(0.35)
(0.54)
(0.77)
(1.21)
(1.57)
Maximum
Outside
Dimension
0.55
0.59
0.82
1.04
1.35
1.75
2.20
2.74
(14.0)
14.0
15.0
15.0
20.8
21.8
21.8
26.4
34.3
44.5
55.9
69.6
(0.55)
Pressure
Rating
psig (bar)
(15.0)
(20.8)
(26.4)
(34.3)
Determined
by hose
(44.5)
(55.9)
(69.6)
(0.59)
(0.59)
(0.82)
(0.86)
(0.86)
(1.04)
Determined
by hose
(1.35)
(1.75)
(2.20)
(2.74)
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
57
B
A
Sanitary
Clamp
Size
in.
1/2
3/4
1
1 1/2
2
Nominal
End
Hose Size Connection
Designator Designator
8
TS8
12
TS12
16
TS16
24
TS24
32
TS32
Male Pipe
Thread,
ISO/BSP
Tapered
Size
in.
1/4
3/8
Nominal
Hose Size
Designator
4
6
End
Connection
Designator
MT4
MT6
1/2
3/4
1
1 1/2
2
8
12
16
24
32
MT8
MT12
MT16
MT24
MT32
ISO/BSP
Parallel,
60 Male
Cone
Size
in.
1/4
3/8
Nominal
Hose Size
Designator
4
6
End
Connection
Designator
MS4
MS6
1/2
3/4
1
1 1/2
2
8
12
16
24
32
MS8
MS12
MS16
MS24
MS32
Female
Pipe
Thread,
ISO/BSP
Tapered
Size
in.
1/4
3/8
Nominal
Hose Size
Designator
4
6
End
Connection
Designator
FT4
FT6
1/2
3/4
1
1 1/2
2
8
12
16
24
32
FT8
FT12
FT16
FT24
FT32
A
Max
1.91 (48.5)
2.31 (58.7)
2.72
3.26
3.45
4.25
5.12
(69.1)
(82.8)
(87.6)
(108)
(130)
A
Max
1.99 (50.5)
2.38 (60.5)
2.65
3.37
3.38
4.21
5.16
(67.3)
(85.6)
(85.9)
(107)
(131)
A
Max
1.85 (47.0)
2.32 (58.9)
2.67
3.37
3.45
4.15
4.99
(67.8)
(85.6)
(87.6)
(105)
(127)
Maximum
Outside
Dimension
1.04 (26.4)
1.35 (34.3)
1.98 (50.3)
2.20 (55.9)
2.74 (69.6)
Pressure
Rating
psig (bar)
3100 (213)
2800 (192)
1200 (82.6)
1200 (82.6)
650 (44.7)
FLUOROPOLYMER
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
58
FLUOROPOLYMER
JIS(A)/ISO 2852-Type
Sanitary
B
A
ISO/BSP
Parallel
Thread
Size
in.
1/4
3/8
Nominal
Hose Size
Designator
4
6
End
Connection
Designator
FS4
FS6
1/2
3/4
1
1 1/2
2
8
12
16
24
32
FS8
FS12
FS16
FS24
FS32
Swivel
ISO/BSP
Parallel
Thread,
30 Cone
Size
in.
1/4
Nominal
Hose Size
Designator
4
End
Connection
Designator
BS4
3/8
1/2
6
8
BS6
BS8
Swivel
ISO/BSP
Parallel
Thread,
60 Cone
Size
in.
1/4
Nominal
Hose Size
Designator
4
End
Connection
Designator
BM4
3/8
1/2
6
8
BM6
BM8
JIS(A)/ISO
2852-Type
Sanitary
Size
8A
10A
15A
Nominal
Hose Size
Designator
6
8
12
End
Connection
Designator
JS8
JS10
JS15
A
Max
2.06 (52.3)
2.57 (65.3)
2.84
3.39
3.46
4.29
4.95
(72.1)
(86.1)
(87.9)
(109)
(126)
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
Pressure
Rating
psig (bar)
Determined
by hose
B, Flange
Outside
Diameter
Pressure
Rating
psig (bar)
1.34 (34.0)
500 (34.4)
The B dimension is also the maximum outside dimension of the hose assembly.
ISO-KF
Vacuum
Flange
Size
mm
16
25
40
50
Nominal
End
Hose Size Connection
Designator Designator
12
KF16
16
KF25
24
KF40
32
KF50
A
Max
71.1 (2.80)
68.6 (2.70)
82.6 (3.25)
106 (4.16)
Dimensions, mm (in.)
Minimum
B, Flange
Inside
Outside
Diameter
Diameter
13.7 (0.54)
30.0 (1.18)
19.8 (0.78)
40.0 (1.57)
31.4 (1.24)
55.0 (2.16)
42.6 (1.68)
75.0 (2.95)
Maximum
Outside
Dimension
34.3 (1.35)
44.5 (1.75)
55.9 (2.20)
75.2 (2.96)
Pressure
Rating
bar (psig)
10.0 (145)
59
B
A
Sanitary
DIN 11864-3
Form A
Size
mm
10
15
20
25
40
50
Nominal
Hose Size
Designator
6
8
12
12
16
24
32
End
Connection
Designator
DB10
DB15
DB15
DB20
DB25
DB40
DB50
A
Max
51.8 (2.04)
56.9 (2.24)
70.4 (2.77)
60.5 (2.38)
67.3 (2.65)
83.6 (3.29)
101 (3.97)
Dimensions, mm (in.)
Minimum
B, Flange
Inside
Outside
Diameter
Diameter
6.6 (0.26)
35.6 (1.40)
8.6 (0.34)
34.0 (1.34)
13.7 (0.54)
34.0 (1.34)
13.7 (0.54)
50.3 (1.98)
19.8 (0.78)
50.3 (1.98)
31.4 (1.24)
64.0 (2.52)
42.6 (1.68)
77.5 (3.05)
Pressure
Rating
bar (psig)
40.0 (580)
24.8 (360)
The B dimension is also the maximum outside dimension of the hose assembly.
Female
DIN 11851
with Nut
Size
mm
15
20
25
40
50
Nominal
Hose Size
Designator
8
12
16
24
32
End
Connection
Designator
DF15
DF20
DF25
DF40
DF50
ASME Class
150 Lap
Joint Flange
Size
in.
1/2
Nominal
Hose Size
Designator
8
End
Connection
Designator
GA8
3/4
1
1 1/2
2
12
16
24
32
GA12
GA16
GA24
GA32
JIS 10K
Lap Joint
Flange
Size
mm
15
20
25
40
50
Nominal
Hose Size
Designator
8
12
16
24
32
End
Connection
Designator
HA15
HA20
HA25
HA40
HA50
DIN PN10
Lap Joint
Flange
Size
mm
15
20
25
40
50
Nominal
Hose Size
Designator
8
12
16
24
32
End
Connection
Designator
FA15
FA20
FA25
FA40
FA50
A
Max
57.4 (2.26)
73.7 (2.90)
70.6 (2.78)
87.6 (3.45)
106 (4.19)
Dimensions, mm (in.)
Minimum
Maximum
Inside
Outside
Diameter
Dimension
8.6 (0.34)
44.2 (1.74)
13.7 (0.54)
54.4 (2.14)
19.8 (0.78)
63.2 (2.49)
31.4 (1.24)
78.2 (3.08)
42.6 (1.68)
92.2 (3.63)
(129)
A
Max
69.9 (2.75)
86.6 (3.41)
85.9 (3.38)
104 (4.09)
123 (4.86)
Dimensions, mm (in.)
Minimum
Maximum
Inside
Outside
Diameter
Dimension
8.6 (0.34)
95.3 (3.75)
13.7 (0.54)
100 (3.95)
19.8 (0.78)
125 (4.93)
31.4 (1.24)
140 (5.52)
42.6 (1.68)
155 (6.11)
A
Max
69.9 (2.75)
86.6 (3.41)
88.9 (3.50)
121 (4.76)
123 (4.86)
Dimensions, mm (in.)
Minimum
Maximum
Inside
Outside
Diameter
Dimension
8.6 (0.34)
95.3 (3.75)
13.7 (0.54)
105 (4.14)
19.8 (0.78)
115 (4.54)
31.4 (1.24)
150 (5.92)
42.6 (1.68)
165 (6.51)
A
Max
2.75 (69.9)
3.41
3.38
4.09
5.06
(86.6)
(85.9)
(104)
Pressure
Rating
bar (psig)
40.0 (580)
24.8 (360)
Pressure
Rating
psig (bar)
275 (18.9)
Pressure
Rating
bar (psig)
9.7 (142)
Pressure
Rating
bar (psig)
10.0 (145)
FLUOROPOLYMER
60
FLUOROPOLYMER
Sanitary
I-Line
Male
Size
in.
1
1 1/2
2
Nominal
Hose Size
Designator
16
24
32
End
Connection
Designator
MD16
MD24
MD32
Pressure
Rating
psig (bar)
1220 (84.0)
1220 (84.0)
900 (62.0)
Sanitary
I-Line
Female
Size
in.
1
1 1/2
2
Nominal
Hose Size
Designator
16
24
32
End
Connection
Designator
FD16
FD24
FD32
Pressure
Rating
psig (bar)
1220 (84.0)
1220 (84.0)
900 (62.0)
Nominal
Hose Size
Designator
4
6
8
8
12
12
16
16
24
32
End
Connection
Designator
DA10
DA10
DA10
DA15
DA15
DA20
DA25
DA32
DA40
DA50
Sanitary
(DIN
32676)
Size
mm
10
316L SS material with a 15in.
(0.38 m) Ra max surface
finish prior to crimp.
15
20
25
32
40
50
A
Max
46.0 (1.81)
56.1 (2.21)
56.6 (2.23)
58.9 (2.32)
72.6 (2.86)
72.6 (2.86)
72.6 (2.86)
72.6 (2.86)
84.6 (3.33)
113 (4.44)
Dimensions, mm (in.)
Minimum
B, Flange
Inside
Outside
Diameter
Diameter
4.0 (0.16)
34.0 (1.34)
6.6 (0.26)
34.0 (1.34)
8.6 (0.34)
34.0 (1.34)
11.1 (0.44)
34.0 (1.34)
13.7 (0.54)
34.0 (1.34)
13.7 (0.54)
34.0 (1.34)
19.8 (0.78)
50.5 (1.99)
19.8 (0.78)
50.5 (1.99)
31.4 (1.24)
50.5 (1.99)
42.6 (1.68)
64.0 (2.52)
Pressure
Rating
bar (psig)
15.8 (230)
The B dimension is also the maximum outside dimension of the hose assembly.
Hose assembly maximum outside dimension is 69.6 mm (2.74 in.).
B
A
Sanitary
(ISO 2852)
Size
mm
12
13
20
26
25
40
50
Nominal
Hose Size
Designator
8
6
12
12
16
24
32
End
Connection
Designator
ES12
ES13
ES20
ES26
ES25
ES40
ES50
A
Max
58.4 (2.30)
54.1 (2.13)
72.6 (2.86)
73.9 (2.91)
72.4 (2.85)
88.9 (3.50)
106 (4.16)
Dimensions, mm (in.)
Minimum
B, Flange
Inside
Outside
Diameter
Diameter
8.6 (0.34)
34.0 (1.34)
6.6 (0.26)
34.0 (1.34)
13.7 (0.54)
34.0 (1.34)
13.7 (0.54)
50.5 (1.99)
19.8 (0.78)
50.5 (1.99)
31.4 (1.24)
64.0 (2.52)
42.6 (1.68)
64.0 (2.52)
The B dimension is also the maximum outside dimension of the hose assembly.
Hose assembly maximum outside dimension is 64.3 mm (2.53 in.).
Hose assembly maximum outside dimension is 69.6 mm (2.74 in.).
Pressure
Rating
bar (psig)
103 (1500)
34.4 (500)
34.4 (500)
31.0 (450)
61
Designed for use with both Swagelok PFA tube fittings and
Type II.
Flexible tubing commonly used where chemical
compatibility is desired.
PFA
Technical Data
Pressure ratings are for properly grooved Swagelok PFA tubing used with Swagelok PFA
tube fittings and for Swagelok PFA tubing used with metal Swagelok tube fittings.
Fractional Tubing
Metric Tubing
100 (37)
200 (93)
300 (148)
400 (204)
(13.7)
0.062
1/4
3/8
1/2
Working Pressure
psig (bar)
275
180
125
3/4
83
61
(18.9)
(5.7)
(4.2)
(12.4)
(8.6)
245
180
245
155
115
73
54
(16.8)
(12.4)
(16.8)
(10.6)
(7.9)
(5.0)
(3.7)
145
110
145
93
68
43
32
(9.9)
(7.5)
(9.9)
(6.4)
(4.6)
(2.9)
(2.2)
87
64
87
48
32
19
13
(5.9)
(4.4)
(5.9)
(3.3)
(2.2)
(1.3)
(0.89)
47
34
47
11
11
5.0
3.0
(3.2)
(2.3)
(3.2)
(0.75)
(0.75)
(0.34)
(0.20)
Tubing Wall, mm
Nominal
Tube Size
mm
Temperature
C (F)
20 (70)
50 (122)
100 (212)
150 (302)
200 (392)
1.5
12
8.9
10
12
6
8
Working Pressure
bar (psig)
7.0
5.7
19
14
(174)
(129)
(101)
(82)
(275)
(203)
10
12
11
8.9
(159)
(129)
9.7
7.1
5.5
4.6
15
11
8.7
7.1
(140)
(103)
(79)
(66)
(217)
(159)
(126)
(103)
6.1
4.4
3.4
2.8
9.5
6.9
5.3
4.4
(88)
(63)
(49)
(40)
(137)
(100)
(76)
(63)
3.8
2.5
1.8
1.4
5.9
4.0
2.9
2.2
(55)
(36)
(26)
(20)
(85)
(58)
(42)
(31)
2.2
1.3
0.8
0.6
3.4
2.0
1.3
0.9
(31)
(18)
(11)
(8.7)
(49)
(29)
(18)
(13)
62
Nominal
Tube Size
Dimensions
1/8 in.
1/4 in.
PFA
3/8 in.
Length
Nominal Wall
Thickness
ft (m)
in.
100 (30.5)
PFA-T2-030-100
500 (152)
PFA-T2-030-500
100 (30.5)
0.030
PFA-T4-047-100
0.047
PFA-T4-062-100
0.062
50 (15.2)
PFA-T6-062-50
100 (30.5)
PFA-T6-062-100
0.062
50 (15.2)
PFA-T8-062-50
100 (30.5)
PFA-T8-062-100
3/4 in.
50 (15.2)
PFA-T12-062-50
0.062
1 in.
50 (15.2)
PFA-T16-062-50
0.062
1/2 in.
Dimensions
0.062
mm
m (ft)
6 mm
8 mm
30 (98.4)
10 mm
12 mm
PFA-T6M-1M-30M
1.0
PFA-T6M-1.5M-30M
1.5
PFA-T8M-1M-30M
1.0
PFA-T8M-1.5M-30M
1.5
PFA-T10M-1M-30M
1.0
PFA-T10M-1.5M-30M
1.5
PFA-T12M-1M-30M
1.0
PFA-T12M-1.5M-30M
1.5
Custom sizes, wall thickness, and lengths are available. Contact your
authorized Swagelok representative.
Groove Cutter
Tube
Size
in.
Ordering
Number
1/8
MS-GC-2
1/4
MS-GC-4
3/8
MS-GC-6
1/2
MS-GC-8
63
transparency is desired.
assembly.
vacuum-service applications.
HC series
end connection
Tubing insert
Hose clamp
Nominal Nominal
Inside
Outside Temperature
Diameter Diameter
Range
in.
in.
F (C)
Working Pressure
at 70F (20C)
psig (bar)
Bulk
Tubing
Weight
lb/ft (kg/m)
Ordering
Number
VINYL
Standard Wall
1/8
1/4
40 (2.7)
0.02 (0.03)
LT-2-4
3/16
5/16
30 (2.0)
0.03 (0.04)
LT-3-5
1/4
3/8
25 (1.7)
0.04 (0.05)
LT-4-6
3/8
1/2
15 (1.0)
0.05 (0.07)
LT-6-8
1/2
5/8
10 (0.68)
0.06 (0.08)
LT-8-10
40 to 165
(40 to 73)
Thick-Wall Vacuum
1/4
3/8
5/8
40 to 165
7/8
(40 to 73)
0.13 (0.20)
Vacuum service over
entire temperature range 0.27 (0.41)
LT-4-10V
LT-6-14V
Pressure-Temperature Ratings
Nominal Tubing Size
in.
Standard Wall
1/8
Temperature F (C)
40 (40 ) to 70 (20)
80 (26)
100 (37)
120 (48)
140 (60)
160 (71)
165 (73)
3/16
1/4
3/8
1/2
(2.7)
(2.6)
(2.2)
(1.6)
16 (1.1)
8.4 (0.57)
6.4 (0.44)
30
29
24
18
(2.0)
(1.9)
(1.6)
(1.2)
12 (0.82)
6.3 (0.43)
4.8 (0.33)
25
24
20
15
(1.7)
(1.6)
(1.3)
(1.0)
10 (0.68)
5.3 (0.36)
4.0 (0.27)
15
14
12
9.0
(1.0)
(1.0)
(0.82)
(0.62)
6.0 (0.41)
3.2 (0.21)
2.4 (0.16)
10
10
8.0
6.0
(0.68)
(0.68)
(0.55)
(0.41)
4.0 (0.27)
2.1 (0.14)
1.6 (0.11)
See next page for connectors, sleeves, hose clamps, and tubing inserts.
64
pressure applications.
pressure applications.
Ordering Information
Add SS for 316 stainless steel or B for brass to the basic ordering number.
Example: SS-2-HC-1-2
For end connection barb dimensions, see page 66. To determine the cut length of bulk hose for field
assembly, subtract dimension B for each end connection from the desired overall length.
Male Pipe Threads,
NPT and ISO/BSP Tapered
(ISO 7)
B
NPT and
ISO/BSP
Tapered
Size
in.
Nominal
Tubing
ID
in.
Basic
Ordering
Number
Maximum
Outside
Dimension
NPT
1/8
Vinyl
1/4
3/8
1/2
3/4
1/8
-2-HC-1-2
1.08 (27.4)
3/16
-3-HC-1-2
1.27 (32.2)
1/4
-4-HC-1-2
1.47 (37.3)
5/16
-5-HC-1-2
1.55 (39.4)
0.19 (4.8)
0.13 (3.3)
0.68 (17.3)
0.13 (3.3)
0.19 (4.8)
1/8
-2-HC-1-4
1.26 (32.0)
0.08 (2.0)
3/16
-3-HC-1-4
1.45 (36.8)
0.13 (3.3)
1/4
-4-HC-1-4
1.65 (41.9)
5/16
-5-HC-1-4
1.73 (43.9)
3/8
-6-HC-1-4
1.73 (43.9)
1/2
-8-HC-1-4
1.80 (45.7)
1/4
-4-HC-1-6
1.66 (42.2)
0.87 (22.1)
0.19 (4.8)
5/16
-5-HC-1-6
1.74 (44.2)
0.87 (22.1)
0.19 (4.8)
3/8
-6-HC-1-6
1.74 (44.2)
0.87 (22.1)
0.30 (7.6)
1/2
-8-HC-1-6
1.81 (46.0)
0.87 (22.1)
0.38 (9.7)
5/8
-10-HC-1-6
1.88 (47.8)
0.90 (22.9)
0.38 (9.7)
1/4
-4-HC-1-8
1.85 (47.0)
1.06 (26.9)
0.19 (4.8)
5/16
-5-HC-1-8
1.96 (49.8)
1.09 (27.7)
0.19 (4.8)
3/8
-6-HC-1-8
1.96 (49.8)
1.09 (27.7)
0.30 (7.6)
1/2
-8-HC-1-8
2.03 (51.6)
1.09 (27.7)
0.38 (9.7)
5/8
-10-HC-1-8
2.07 (52.6)
1.09 (27.7)
0.47 (11.9)
3/4
-12-HC-1-8
2.14 (54.4)
1.09 (27.7)
0.47 (11.9)
0.86 (21.8)
0.19 (4.8)
0.51 (12.9)
0.65 (16.6)
0.19 (4.8)
0.30 (7.6)
0.28 (7.1)
5/8
-10-HC-1-12
2.07 (52.6)
1.09 (27.7)
0.50 (12.7)
3/4
-12-HC-1-12
2.14 (54.4)
1.09 (27.7)
0.63 (16.0)
-16-HC-1-12
2.38 (60.5)
1.19 (30.2)
0.63 (16.0)
3/4
-12-HC-1-16
2.43 (61.7)
-16-HC-1-16
2.57 (65.3)
1/8
-2-HC-1-2RT
1.28 (32.5)
0.88 (22.4)
0.08 (2.0)
1/4
-4-HC-1-2RT
1.47 (37.3)
0.68 (17.3)
0.19 (4.8)
1.38 (35.1)
0.63 (16.0)
0.88 (22.4)
0.80 (20.3)
0.80 (20.3)
1.23 (31.3)
1.02 (25.8)
1.23 (31.3)
1.23 (31.3)
1.60 (40.5)
1.60 (40.5)
ISO/BSP Tapered
1/8
1/4
3/8
1/2
1/4
-4-HC-1-4RT
1.65 (41.9)
3/8
-6-HC-1-4RT
1.73 (43.9)
1/4
-4-HC-1-6RT
1.66 (42.2)
3/8
-6-HC-1-6RT
1.74 (44.2)
3/8
-6-HC-1-8RT
1.96 (49.8)
1/2
-8-HC-1-8RT
2.03 (51.6)
0.86 (21.8)
0.87 (22.1)
1.09 (27.7)
0.19 (4.8)
0.30 (7.6)
0.30 (7.6)
0.30 (7.6)
0.38 (9.7)
0.51 (12.9)
0.65 (16.6)
0.80 (20.3)
1.02 (25.8)
65
1/8
A
1/4
3/8
1/2
Basic
Ordering
Number
1/8
-2-HC-7-2
1.11 (28.2)
0.71 (18.0)
0.08 (2.0)
3/16
-3-HC-7-2
1.29 (32.8)
0.70 (17.8)
0.13 (3.3)
1/4
-4-HC-7-2
1.47 (37.3)
0.68 (17.3)
0.19 (4.8)
1/8
-2-HC-7-4
1.26 (32.0)
0.86 (21.8)
0.08 (2.0)
3/16
-3-HC-7-4
1.44 (36.6)
0.85 (21.6)
0.13 (3.3)
1/4
-4-HC-7-4
1.64 (41.7)
0.85 (21.6)
0.19 (4.8)
5/16
-5-HC-7-4
1.73 (43.9)
0.86 (21.8)
0.19 (4.8)
3/8
-6-HC-7-4
1.69 (42.9)
0.82 (20.8)
0.30 (7.6)
1/4
-4-HC-7-6
1.71 (43.4)
0.92 (23.4)
0.19 (4.8)
5/16
-5-HC-7-6
1.82 (46.2)
0.95 (24.1)
0.19 (4.8)
3/8
-6-HC-7-6
1.78 (45.2)
0.91 (23.1)
0.30 (7.6)
3/8
-6-HC-7-8
2.03 (51.6)
1.16 (29.5)
0.30 (7.6)
1/2
-8-HC-7-8
2.13 (54.1)
1.19 (30.2)
0.38 (9.7)
1/8
A
1/4
Nominal
Tubing
ID
in.
Basic
Ordering
Number
Dimensions
Minimum
Inside
B
Diameter
0.87 (22.1)
1.02 (25.8)
1.23 (31.3)
Maximum
Outside
Dimension
-2-HC-A-201
1.36 (34.5)
0.96 (24.4)
0.08 (2.0)
0.36 (9.2)
1/8
-2-HC-A-401
1.45 (36.8)
1.05 (26.7)
0.08 (2.0)
0.44 (11.0)
1/4
-4-HC-A-401
1.85 (47.0)
5/16
-5-HC-A-401
1.93 (49.0)
1.06 (26.9)
0.16 (4.1)
3/8
-6-HC-A-401
1.93 (49.0)
0.51 (12.9)
0.51 (12.9)
0.65 (16.6)
-4-HC-A-601
1.91 (48.5)
3/8
-6-HC-A-601
1.99 (50.5)
1/2
-8-HC-A-601
2.06 (52.3)
3/8
-6-HC-A-811
2.25 (57.2)
1/2
-8-HC-A-811
2.32 (58.9)
3/4
3/4
-12-HC-A-1211
2.49 (63.3)
1.44 (36.6)
-16-HC-A-1611
3.05 (77.5)
-4-HC-A-6MTA
47.8 (1.88)
1/2
0.65 (16.6)
1/8
1/4
3/8
Maximum
Outside
Dimension
0.19 (4.8)
1.12 (28.4)
0.27 (6.9)
0.51 (12.9)
0.65 (16.6)
0.80 (20.3)
0.30 (7.6)
0.73 (18.4)
0.38 (9.7)
0.80 (20.3)
0.58 (14.7)
1.23 (31.3)
1.86 (47.2)
0.80 (20.3)
1.60 (40.5)
27.7 (1.09)
4.1 (0.16)
12.9 (0.51)
Maximum
Outside
Dimension
1.38 (35.1)
Dimensions, mm (in.)
6
1/4 in.
Swagelok tube adapters are to be used only with Swagelok tube fittings.
Tube
Fitting
Size
in.
Nominal
Tubing
ID
in.
Basic
Ordering
Number
1/8
-2-HC-1-200
1.42 (36.1)
1/4
-4-HC-1-200
1.81 (46.0)
1/4
-4-HC-1-400
1.92 (48.8)
1.13 (28.7)
3/8
-6-HC-1-400
1.99 (50.6)
1.12 (28.5)
3/8
3/8
-6-HC-1-600
2.06 (52.3)
1/2
1/2
-8-HC-1-810
2.24 (56.9)
1/8
A
1/4
1.02 (25.9)
0.08 (2.0)
0.09 (2.3)
0.51 (12.9)
0.19 (4.8)
0.65 (16.6)
1.19 (30.2)
0.28 (7.1)
0.87 (22.1)
1.30 (33.0)
0.38 (9.7)
1.02 (25.8)
VINYL
66
KwikClamp
Size
in.
1/2
1
A
Nominal
Tubing
ID
in.
Ordering
Number
3/16
SS-3-HC-8SC
1.10 (27.9)
0.13 (3.3)
1/4
SS-4-HC-8SC
1.28 (32.5)
0.19 (4.8)
3/8
SS-6-HC-8SC
1.36 (34.5)
0.30 (7.6)
1.44 (36.6)
0.38 (9.7)
1/2
SS-8-HC-8SC
3/16
SS-3-HC-16SC
0.13 (3.3)
1/4
SS-4-HC-16SC
0.19 (4.8)
3/8
SS-6-HC-16SC
1/2
SS-8-HC-16SC
1.50 (38.1)
0.99 (25.2)
1.98 (50.3)
0.30 (7.6)
0.38 (9.7)
Vinyl
Nominal
Tubing
ID, in.
1/8
0.15 (3.8)
0.08 (2.0)
0.40 (10.2)
3/16
0.23 (5.8)
0.12 (3.0)
0.59 (15.0)
1/4
0.30 (7.6)
0.19 (4.8)
0.79 (20.1)
5/16
0.38 (9.7)
0.19 (4.8)
0.87 (22.1)
3/8
0.45 (11.4)
0.30 (7.6)
0.87 (22.1)
1/2
0.60 (15.2)
0.38 (9.7)
0.94 (23.9)
5/8
0.75 (19.0)
0.50 (12.7)
0.98 (24.9)
3/4
0.90 (22.9)
0.63 (16.0)
1.05 (26.7)
1.20 (30.5)
0.88 (22.4)
1.19 (30.2)
Hose
ID
in.
1/4
1/8
A-2-L-4
3/8
1/4
A-4-L-6
7/16
1/4
A-4-L-7
1/2
1/4
A-4-L-8
7/16
5/16
A-5-L-7
1/2
3/8
A-6-L-8
9/16
3/8
A-6-L-9
5/8
7/16
A-7-L-10
11/16
1/2
A-8-L-11
3/4
A-12-L-16
Hose Clamps
Material:
Ordering
Number
Dimensions, in.
Maximum
Outside
E
Dimension
0.40 (10.2)
0.79 (20.1)
0.87 (22.1)
0.94 (23.9)
1.07 (27.2)
0.26 (6.6)
0.44 (11.0)
0.41 (10.4)
0.65 (16.6)
0.46 (11.7)
0.73 (18.4)
0.52 (13.2)
0.80 (20.3)
0.48 (12.2)
0.73 (18.4)
0.55 (14.0)
0.80 (20.3)
0.61 (15.5)
0.87 (22.1)
0.69 (17.5)
0.94 (23.9)
0.76 (19.3)
1.02 (25.8)
1.10 (27.9)
1.45 (36.8)
Tubing Inserts
Tubing inserts help
Min
Hose
OD
in.
Max
Hose
OD
in.
Ordering
Number
7/16
25/32
MS-HCC-6
Band
Marking
6
1/2
29/32
MS-HCC-8
9/16
1 1/16
MS-HCC-10
10
11/16
1 1/4
MS-HCC-12
12
13/16
1 1/2
MS-HCC-16
16
67
is required.
Static dissipative, smooth-bore nylon core ().
Single hose
Size range of 1/4, 3/8 and 1/2 in. and working pressures up
custom assemblies.
Fiber reinforcement
316 SS end
connections
Technical Data
Single
(NGS)
Twin
(NGT)
Vent
(NGV)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Temperature
Range
F (C)
Working
Pressure
at 70F (20C)
psig (bar)
Burst
Pressure
at 70F (20C)
psig (bar)
Bulk
Hose
Weight
lb/ft (kg/m)
5000 (344)
20 000 (1378)
0.15 (0.22)
1/4 (6.4)
0.26 (6.6)
0.63 (16.0)
2.00 (5.08)
3/8 (9.6)
0.38 (9.6)
0.77 (19.6)
4.00 (10.2)
1/2 (12.7)
0.52 (13.2)
0.89 (22.6)
5.50 (14.0)
0.21 (0.32)
1/4 (6.4)
0.26 (6.6)
0.63 (16.0)
2.00 (5.08)
40 to 150
0.25 (0.37)
3/8 (9.6)
0.38 (9.6)
0.77 (19.6)
4.00 (10.2)
(40 to 65)
1/4 (6.4)
3/8 (9.6)
0.12 (0.17)
2.00 (5.08)
4.00 (10.2)
0.30 (0.44)
0.15 (0.22)
0.25 (0.37)
Testing
Warning:
NYLON
Hose
Nominal
Style
Hose Size
(Series)
in. (mm)
Minimum
Inside
Bend
Radius
in. (cm)
68
SS - NGS 4 - T6 S4 - 40 - F
1 Material
End Connections
SS = 316 stainless steel
2 Hose
NYLON
4 = 1/4
6 = 3/8
8 = 1/2
4 End Connections
6 Options
69
Nozzle
end
Fill hose
Dispenser
end
Vent hose
SS - NGV 6 - S6 T6
1 Material
End Connections
SS = 316 stainless steel
2 Hose
S4 P6 - 24 - 1
Adjustment
Positive
X = None
1 = 2 in.
2 = 4 in.
3 = 6 in.
4 = 8 in.
5 = 10 in.
6 = 12 in.
7 = 15 in.
8 = 18 in.
9 = 21 in.
0 = 24 in.
Negative
X = None
A = 2 in.
B = 4 in.
C = 6 in.
D = 8 in.
E = 10 in.
F = 12 in.
G = 15 in.
H = 18 in.
J = 21 in.
K = 24 in.
10
11
3 - X
Adjustment
Positive
X = None
1 = 2 in.
2 = 4 in.
3 = 6 in.
4 = 8 in.
5 = 10 in.
6 = 12 in.
7 = 15 in.
8 = 18 in.
9 = 21 in.
0 = 24 in.
Negative
X = None
A = 2 in.
B = 4 in.
C = 6 in.
D = 8 in.
E = 10 in.
F = 12 in.
G = 15 in.
H = 18 in.
J = 21 in.
K = 24 in.
X = No spring guards
This option should only be used in static
bend applications.
NYLON
70
Nominal
Hose
Size
End
Connection
Designator
Dimensions
Minimum
Inside
Diameter
Maximum
Outside
Dimension
1/4
1/4
S4
2.57 (65.3)
0.15 (3.8)
0.80 (20.3)
3/8
3/8
S6
2.94 (74.7)
0.24 (6.1)
0.87 (22.1)
1/2
1/2
S8
3.30 (83.8)
0.36 (9.1)
1.16 (29.5)
G8
65.5 (2.58)
3.8 (0.15)
20.3 (0.80)
Dimensions, mm (in.)
8
1/4 in.
10
3/8 in.
G1
74.9 (2.95)
6.1 (0.24)
22.1 (0.87)
12
1/2 in.
G2
83.8 (3.30)
9.1 (0.36)
29.5 (1.16)
Tube
Adapter
Size
Nominal
Hose
Size
End
Connection
Designator
Dimensions
Minimum
Inside
Diameter
Maximum
Outside
Dimension
T4
2.48 (63.0)
0.15 (3.8)
0.80 (20.3)
1/4
3/8
1/2
3/4
1/4
1/4
T6
2.47 (62.7)
0.15 (3.8)
0.80 (20.3)
3/8
T6
2.82 (71.6)
0.24 (6.1)
0.87 (22.1)
T8
3.40 (86.4)
0.36 (9.1)
1.16 (29.5)
T7
3.70 (94.0)
0.56 (14.2)
1.31 (33.1)
1/2
NYLON
Dimensions, mm (in.)
1/4 in.
E8
62.7 (2.47)
3.8 (0.15)
20.3 (0.80)
10
3/8 in.
E1
71.6 (2.82)
6.1 (0.24)
22.1 (0.87)
12
1/2 in.
E2
86.4 (3.40)
9.1 (0.36)
29.5 (1.16)
NPT and
ISO/BSP
Tapered
Size
in.
Nominal
Hose
Size
in.
Minimum
Inside
Diameter
Maximum
Outside
Dimension
2.28 (57.9)
0.15 (3.8)
0.80 (20.3)
NPT
1/4
A
1/4
P4
3/8
3/8
P6
2.65 (67.3)
0.24 (6.1)
0.87 (22.1)
1/2
1/2
P8
3.09 (78.5)
0.36 (9.1)
1.16 (29.5)
2.28 (57.9)
0.15 (3.8)
0.80 (20.3)
ISO/BSP Tapered
1/4
1/4
K4
3/8
3/8
K6
2.65 (67.3)
0.24 (6.1)
0.87 (22.1)
1/2
1/2
K8
3.09 (78.5)
0.36 (9.1)
1.16 (29.5)
71
is a concern.
blistering.
83 for details.
Polyurethane cover
Fiber reinforcement
316 SS end
connections
Nylon core
Technical Data
SAE J517
100R7
(7R series)
SAE J517
100R8
(8R series)
Inside
Diameter
in. (mm)
0.25 (6.4)
0.38 (9.8)
0.50 (12.7)
0.25 (6.4)
0.38 (9.8)
0.50 (12.7)
0.75 (19.0)
1.00 (25.4)
Outside
Diameter
in. (mm)
0.52 (13.2)
0.67 (17.0)
0.82 (20.8)
0.53 (13.5)
0.67 (17.0)
0.84 (21.3)
1.15 (29.2)
1.48 (37.6)
Temperature
Range
F (C)
40 to 200
(40 to 93)
40 to 200
(40 to 93)
Working
Pressure at
70F (20C)
psig (bar)
2750 (189)
2250 (155)
2000 (137)
5000 (344)
4000
3500
2250
2000
(275)
(241)
(155)
(137)
Burst
Pressure at
70F (20C)
psig (bar)
11 000 (757)
9 000 (620)
8 000 (551)
20 000 (1378)
16 000 (1102)
14 000 (964)
9 000 (620)
8 000 (551)
Bulk
Hose
Weight
lb/ft (kg/m)
0.07 (0.10)
0.10 (0.15)
0.14 (0.21)
0.19 (0.28)
0.11 (0.16)
0.15 (0.22)
0.26 (0.39)
0.39 (0.58)
NYLON
Specification
(Series)
Nominal
Hose Size
in. (mm)
1/4 (6.4)
3/8 (9.6)
1/2 (12.7)
1/4 (6.4)
3/8 (9.6)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
Minimum
Inside
Bend
Radius
in. (cm)
1.25 (3.18)
2.00 (5.08)
3.00 (7.62)
2.00 (5.08)
2.50 (6.35)
4.00 (10.2)
6.50 (16.5)
10.0 (25.4)
1/4 in. (6.4 mm) size does not meet SAE J517 impulse cycle requirements at maximum temperature and minimum bend radius.
Bulk Hose
Select an ordering number.
Hose
Series
7R
8R
Coils of nominal hose sizes smaller than 1 in. may
contain up to three pieces of hose.
Nominal
Hose
Size, in.
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
Ordering
Number
7R-4
7R-6
7R-8
8R-4
8R-6
8R-8
8R-12
8R-16
Reel
Length
ft (m)
250 (76)
250 (76)
125 (38)
50 (15)
72
83 for details.
Polyurethane cover
Fiber reinforcement
316 SS end
connections
Technical Data
Specification
(Series)
SAE J517
100R7
(7N series)
NYLON
SAE J517
100R8
(8N series)
Nominal
Hose Size
in. (mm)
1/4 (6.4)
3/8 (9.6)
1/2 (12.7)
Inside
Diameter
in. (mm)
0.26 (6.5)
0.38 (9.8)
0.50 (12.7)
Outside
Diameter
in. (mm)
0.49 (12.4)
0.65 (16.5)
0.80 (20.3)
Minimum
Inside
Bend
Radius
in. (cm)
1.25 (3.18)
2.00 (5.08)
3.00 (7.62)
3/4 (19.0)
0.75 (19.0)
1.15 (29.2)
6.50 (16.5)
Temperature
Range
F (C)
40 to 200
(40 to 93)
40 to 200
(40 to 93)
Working
Pressure at
70F (20C)
psig (bar)
2750 (189)
2250 (155)
2000 (137)
Burst
Pressure at
70F (20C)
psig (bar)
11 000 (757)
9 000 (620)
8 000 (551)
Bulk
Hose
Weight
lb/ft (kg/m)
0.07 (0.10)
0.10 (0.15)
0.14 (0.21)
2250 (155)
9 000 (620)
0.26 (0.39)
Caution:
Bulk Hose
Hose
Series
7N
8N
Nominal
Hose
Size, in.
1/4
3/8
1/2
3/4
Ordering
Number
7N-4
7N-6
7N-8
8N-12
Reel
Length
ft (m)
250 (76)
125 (38)
73
7R, 8R, 7N, and 8N Series Nylon Hose and 7P Series Polyethylene Hose
End Connections
B
Ordering
Number
2.48
2.47
2.82
3.40
3.40
3.70
4.47
(63.0)
Dimensions, mm
6
1/4 in.
8
1/4 in.
10
3/8 in.
12
1/2 in.
63.0
62.7
71.6
86.4
(2.48)
(62.7)
(71.6)
(86.4)
(86.4)
(94.0)
(113)
1.45
1.44
1.51
1.84
1.84
1.95
2.26
(36.8)
36.8
36.6
38.4
46.7
(1.45)
(36.6)
(38.4)
(46.7)
(46.7)
(49.5)
(57.4)
0.15
0.15
0.24
0.36
0.39
0.56
0.76
(3.8)
(3.8)
(6.1)
(9.1)
(9.9)
(14.2)
(19.3)
Maximum
Outside
Dimension
0.80
0.80
0.87
1.09
1.09
1.31
1.60
(20.3)
20.3
20.3
22.1
27.6
(0.80)
(20.3)
(22.1)
(27.6)
(27.6)
(33.1)
(40.5)
End
Connection
Designator
TA4
TA6
TA6
TA8
TA10
TA12
TA16
(in.)
SS-TP4-TM6
SS-TP4-TM8
SS-TP6-TM10
SS-TP8-TM12
(2.47)
(2.82)
(3.40)
Dimensions
Minimum
Inside
B
Diameter
Tube Nominal
Fitting
Hose
Ordering
Size
Size
Number
Dimensions, in. (mm)
1/4
1/4
SS-TP4-SL4
3/8
3/8
SS-TP6-SL6
1/2
1/2
SS-TP8-SL8
(1.44)
(1.51)
(1.84)
3.8
3.8
6.1
9.1
(0.15)
(0.15)
(0.24)
(0.36)
Dimensions
Minimum
Inside
B
Diameter
(0.80)
(0.87)
(1.09)
TM6
TM8
TM10
TM12
Maximum
Outside
Dimension
End
Connection
Designator
2.57 (65.3)
2.94 (74.7)
3.30 (83.8)
1.54 (39.1)
1.63 (41.4)
1.74 (44.2)
0.15 (3.8)
0.24 (6.1)
0.36 (9.1)
0.80 (20.3)
0.87 (22.1)
1.09 (27.6)
SL4
SL6
SL8
Dimensions, mm (in.)
6
1/4 in.
SS-TP4-SM6
65.3 (2.57)
39.1 (1.54)
3.8 (0.15)
20.3 (0.80)
SM6
1/4 in.
SS-TP4-SM8
65.5 (2.58)
39.4 (1.55)
3.8 (0.15)
20.3 (0.80)
SM8
1/4 in.
SS-TP4-SM10
71.9 (2.83)
45.7 (1.80)
3.8 (0.15)
22.1 (0.87)
SM10
3/8 in.
SS-TP6-SM10
74.9 (2.95)
41.7 (1.64)
6.1 (0.24)
22.1 (0.87)
SM10
1/2 in.
SS-TP8-SM12
83.8 (3.30)
44.2 (1.74)
9.1 (0.36)
27.6 (1.09)
SM12
10
12
NYLON
74
7R, 8R, 7N, and 8N Series Nylon Hose and 7P Series Polyethylene Hose
Male Pipe Threads,
NPT and ISO/BSP Tapered
(ISO 7)
B
NPT and
ISO/BSP Nominal
Tapered Hose
Size
Size
in.
in.
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
3/8
1/2
1/4
3/8
1/2
B
NPT
1.25 (31.8)
1.34 (34.0)
1.34 (34.0)
1.53 (38.9)
SS-TP4-PM4
SS-TP6-PM4
SS-TP6-PM6
SS-TP8-PM8
2.28
2.65
2.65
3.09
SS-TP4-MT4
SS-TP6-MT6
SS-TP8-MT8
ISO/BSP Tapered
2.28 (57.9)
1.25 (31.8)
2.65 (67.3)
1.34 (34.0)
3.09 (78.5)
1.53 (38.9)
ISO/BSP
Parallel,
60 Male Nominal
Cone
Hose
Size
Size
Ordering
in.
in.
Number
1/4
1/4
SS-TP4-MS4
3/8
3/8
SS-TP6-MS6
1/2
1/2
SS-TP8-MS8
Swivel
Size
in.
1/4
3/8
1/2
Nominal
Hose
Size
Ordering
in.
Number
1/4
SS-TP4-AS4
3/8
SS-TP6-AS6
1/2
SS-TP8-AS8
Minimum
Inside
Diameter
(27.6)
0.80 (20.3)
0.87 (22.1)
1.09 (27.6)
MT4
MT6
MT8
A
2.53 (64.3)
2.73 (69.3)
3.00 (76.2)
Maximum
Outside
Dimension
0.80 (20.3)
0.87 (22.1)
1.23 (31.3)
End
Connection
Designator
MS4
MS6
MS8
A
2.62 (66.6)
3.03 (77.0)
3.34 (84.8)
Maximum
Outside
Dimension
0.80 (20.3)
0.87 (22.1)
1.09 (27.6)
End
Connection
Designator
AS4
AS6
AS8
Maximum
Outside
Dimension
0.87 (22.1)
1.02 (25.8)
1.23 (31.3)
End
Connection
Designator
BM4
BM6
BM8
(67.3)
(67.3)
(78.5)
(3.8)
(6.1)
(6.1)
(9.1)
0.15 (3.8)
0.24 (6.1)
0.36 (9.1)
0.80
0.87
0.87
1.09
End
Connection
Designator
PM4
PM4
PM6
PM8
(57.9)
0.15
0.24
0.24
0.36
Maximum
Outside
Dimension
(20.3)
(22.1)
(22.1)
NYLON
Swivel
ISO/BSP
Parallel
Thread,
60
Nominal
Cone
Hose
Size
Size
Ordering
in.
in.
Number
1/4
1/4
SS-TP4-BM4
3/8
3/8
SS-TP6-BM6
1/2
1/2
SS-TP8-BM8
A
2.45 (62.2)
2.87 (72.9)
3.23 (82.0)
75
7R, 8R, 7N, and 8N Series Nylon Hose and 7P Series Polyethylene Hose
Female Swivel ISO/BSP
Parallel Threads with
30 Cone
B
Swivel
ISO/BSP
Parallel
Thread,
30 Cone
Size
in.
1/4
3/8
1/2
Nominal
Hose
Size
Ordering
in.
Number
1/4
SS-TP4-BS4
3/8
SS-TP6-BS6
1/2
SS-TP8-BS8
A
2.56 (65.0)
3.00 (76.2)
3.38 (85.9)
Maximum
Outside
Dimension
0.87 (22.1)
1.02 (25.8)
1.23 (31.3)
End
Connection
Designator
BS4
BS6
BS8
Maximum
Outside
Dimension
0.87 (22.1)
1.02 (25.8)
0.80 (20.3)
End
Connection
Designator
MC14
MC18
MC22
Universal
Globe Seal,
Metric
Female
Swivel Nut
Size
mm
14
18
22
Nominal
Hose
Size
Ordering
in.
Number
1/4
SS-TP4-MC14
3/8
SS-TP6-MC18
1/2
SS-TP8-MC22
A
2.38 (60.5)
2.77 (70.4)
3.08 (78.2)
NYLON
76
SS - 7R 4 TA4 PM4 - 28 F
NYLON
in.
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables on pages 73 to
75.
2 Hose
7R =7R series SAE 100R7 nylon hose
(1/4, 3/8, and 1/2 in. sizes only)
8R =8R series SAE 100R8 nylon hose
7N =7N series SAE 100R7
nonconductive nylon hose
(1/4, 3/8, and 1/2 in. sizes only)
8N =8N series SAE 100R8
nonconductive nylon hose
(3/4 in. size only)
5 Overall Length
5
or
71CM-F
cm
6 Options
For multiple options, add designators in
alphanumeric order with a dash between
each designator. For hose lengths
specified in centimeters, insert a dash as
shown prior to the first option designator.
77
7P SeriesPolyethylene Hose
Features
Polyethylene hose designed for use in food, dairy, and water
applications.
177.1520 and NSF-51, for use with food, dairy, and water.
2750psig(189 bar).
Fiber reinforcement
316 SS end
connections
Polyethylene core
Technical Data
Inside
Diameter
in. (mm)
0.25 (6.4)
0.38 (9.7)
0.50 (12.7)
0.75 (19.0)
1.00 (25.4)
Outside
Diameter
in. (mm)
0.52 (13.2)
0.66 (16.8)
0.81 (20.6)
1.14 (29.0)
1.48 (37.6)
Temperature
Range
F (C)
10 to 150
(23 to 65)
Working
Pressure at
70F (20C)
psig (bar)
2750 (189)
2250
2000
1500
1500
(155)
(137)
(103)
(103)
Burst
Pressure at
70F (20C)
psig (bar)
11 000 (757)
9 000 (620)
8 000 (551)
6 000 (413)
6 000 (413)
Bulk
Hose
Weight
lb/ft (kg/m)
0.06 (0.09)
0.09 (0.13)
0.12 (0.18)
0.25 (0.37)
0.37 (0.55)
Caution:
Bulk Hose
Select an ordering number.
Hose
Series
7P
Nominal
Hose
Size, in.
1/4
3/8
1/2
3/4
1
Ordering
Number
7P-4
7P-6
7P-8
7P-12
7P-16
Reel
Length
ft (m)
250 (76)
125 (38)
50 (15)
POLYETHYLENE
Nominal
Hose Size
in. (mm)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
Minimum
Inside
Bend
Radius
in. (cm)
1.25 (3.18)
2.00 (5.08)
3.00 (7.62)
5.00 (12.7)
8.00 (20.3)
78
SS - 7P 4 TA4 PM4 - 28 F
5
or
71CM-F
cm
in.
1 Material
End Connections
SS = 316 stainless steel
4 End Connections
See End Connection Designator
column in tables on pages 73 to
75.
2 Hose
7P = 7P series polyethylene hose
4
6
8
12
16
=
=
=
=
=
1/4
3/8
1/2
3/4
1
5 Overall Length
6 Options
For multiple options, add designators in
alphanumeric order with a dash between
each designator. For hose lengths
specified in centimeters, insert a dash as
shown prior to the first option designator.
CRN
F
F1
S
POLYETHYLENE
79
on connections.
Buna N cover
Synthetic reinforcement
Buna N core
Technical Data
Nominal
Hose Size
in. (mm)
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Minimum
Inside
Bend
Radius
in. (cm)
1/4 (6.4)
0.26 (6.6)
0.51 (12.8)
2.50 (6.35)
350 (24.1)
1400 (96.4)
0.09 (0.13)
3/8 (9.7)
0.39 (9.9)
0.67 (17.0)
3.00 (7.62)
40 to 200
300 (20.6)
1200 (82.6)
0.14 (0.20)
(40 to 93)
300 (20.6)
1200 (82.6)
0.14 (0.20)
300 (20.6)
1200 (82.6)
0.25 (0.37)
300 (20.6)
1200 (82.6)
0.33 (0.49)
0.50 (12.7)
0.75 (19.0)
5.00 (12.7)
3/4 (19.0)
0.76 (19.3)
1.07 (27.2)
7.00 (17.8)
1 (25.4)
1.00 (25.4)
1.34 (34.0)
8.00 (20.3)
Bulk
Hose
Weight
lb/ft (kg/m)
20 to 200
(28 to 93)
Pressure-Temperature Ratings
Nominal
Hose Size, in.
1/4
Temperature, F (C)
40
(40)
350
20 (28) to 70 (20)
350
100
(37)
315
150
(65)
210
200
(93)
100
3/8, 1/2,
3/4
300
300
270
180
80
(20.6)
(20.6)
(18.6)
(12.4)
(5.5)
300
270
180
80
(20.6)
(18.6)
(12.4)
(5.5)
compatibility in systems
containing heated water-based
fluidssome conditions may
affect the Buna N core.
RUBBER
1/2 (12.7)
Working
Pressure
Burst
Temperature at 40 to 70F
Pressure
Range
(40 to 20C) at 70F (20C)
F (C)
psig (bar)
psig (bar)
80
Bulk Hose
Bulk hose is available in 250 ft (76 m) reels; the standard color
is blue. Select an ordering number from the table below left.
Example: PB-4
For hose of a color other than blue, add a hose color
designator from the table below right.
Example PB-4-BK
Nominal
Hose Size
in.
Ordering
Number
Rubber
Hose Color
Designator
Black
-BK
1/4
PB-4
Gray
-GY
3/8
PB-6
Green
-GR
1/2
PB-8
Red
-RD
3/4
PB-12
Yellow
-YW
PB-16
End Connections
Select a basic ordering number and add SS for 316 SS or B
for brass.
Polyethylene
finishing cap
Example: SS-PB4-SL4
To determine the cut length of bulk hose for field assembly,
subtract dimension B for each end connection from the
desired overall length.
For field assembly instructions, see PB Series Rubber Hose
Assembly and Disassembly, MSCRD0125 and Push-On
Tool Users Manual, MSCRD0190.
RUBBER
Tube
Fitting
Size
in.
Nominal
Hose
Size
in.
1/4
1/4
-PB4-SL4
1.97 (50.0)
1.14 (29.0)
0.15 (3.8)
0.67 (17.0)
SL4
3/8
3/8
-PB6-SL6
2.11 (53.6)
1.17 (29.7)
0.26 (6.6)
0.87 (22.1)
SL6
1/2
1/2
-PB8-SL8
2.47 (62.7)
1.37 (34.8)
0.36 (9.1)
1.02 (25.8)
SL8
Basic
Ordering
Number
Maximum
End
Outside Connection
Dimension Designator
81
Tube
Adapter
Size
Nominal
Hose
Size
Basic
Ordering
Number
Dimensions
Minimum
Inside
B
Diameter
Maximum
End
Outside Connection
Dimension Designator
1/4
1/4
-PB4-TA4
1.93 (49.0)
1.10 (27.9)
0.15 (3.8)
0.58 (14.7)
TA4
3/8
3/8
-PB6-TA6
2.03 (51.6)
1.09 (27.7)
0.24 (6.1)
0.72 (18.3)
TA6
1/2
1/2
-PB8-TA8
2.47 (62.7)
1.37 (34.8)
0.34 (8.6)
0.86 (21.8)
TA8
3/4
3/4
-PB12-TA12
3.14 (79.8)
1.43 (36.3)
0.57 (14.5)
1.22 (31.0)
TA12
-PB16-TA16
4.13 (105)
1.90 (48.3)
0.79 (20.1)
1.58 (40.1)
TA16
Dimensions, mm (in.)
6
1/4 in.
-PB4-TM6
49.0 (1.93)
27.9 (1.10)
3.8 (0.15)
14.7 (0.58)
TM6
1/4 in.
-PB4-TM8
48.8 (1.92)
27.7 (1.09)
3.8 (0.15)
14.7 (0.58)
TM8
3/8 in.
-PB6-TM8
52.1 (2.05)
28.2 (1.11)
5.6 (0.22)
18.3 (0.72)
TM8
10
3/8 in.
-PB6-TM10
51.6 (2.03)
27.7 (1.09)
6.9 (0.27)
18.3 (0.72)
TM10
12
1/2 in.
-PB8-TM12
62.7 (2.47)
34.7 (1.38)
8.1 (0.32)
21.8 (0.86)
TM12
18
3/4 in.
-PB12-TM18
79.8 (3.14)
36.3 (1.43)
13.7 (0.54)
31.0 (1.22)
TM18
25
1 in.
-PB16-TM25
105 (4.13)
48.3 (1.90)
19.8 (0.78)
40.1 (1.58)
TM25
NPT and
ISO/BSP
Tapered
Size
in.
Nominal
Hose
Size
in.
Basic
Ordering
Number
Minimum
Inside
Diameter
Maximum
End
Outside Connection
Dimension Designator
NPT
1/4
-PB4-PM4
1.68 (42.7)
0.85 (21.6)
0.15 (3.8)
0.65 (16.5)
PM4
3/8
-PB6-PM4
1.80 (45.7)
0.86 (21.8)
0.27 (6.9)
0.79 (20.1)
PM4
3/8
3/8
-PB6-PM6
1.80 (45.7)
0.86 (21.8)
0.27 (6.9)
0.79 (20.1)
PM6
1/2
1/2
-PB8-PM8
2.19 (55.6)
1.09 (27.7)
0.37 (9.4)
1.01 (25.7)
PM8
3/4
3/4
-PB12-PM12
2.81 (71.4)
1.10 (27.9)
0.61 (15.5)
1.29 (32.8)
PM12
-PB16-PM16
3.78 (96.0)
1.55 (39.4)
0.79 (20.1)
1.58 (40.1)
PM16
1/4
1/4
-PB4-MT4
1.68 (42.7)
0.85 (21.6)
0.15 (3.8)
0.65 (16.5)
MT4
3/8
3/8
-PB6-MT6
1.80 (45.7)
0.86 (21.8)
0.27 (6.9)
0.79 (20.1)
MT6
1/2
1/2
-PB8-MT8
2.19 (55.6)
1.09 (27.7)
0.37 (9.4)
1.01 (25.7)
MT8
3/4
3/4
-PB12-MT12
2.81 (71.4)
1.10 (27.9)
0.61 (15.5)
1.29 (32.8)
MT12
-PB16-MT16
3.78 (96.0)
1.55 (39.4)
0.79 (20.1)
1.58 (40.1)
MT16
1/4
A
ISO/BSP Tapered
Nominal
Hose
Size
in.
Basic
Ordering
Number
Maximum
Outside
Dimension
1/4
-PB4-6
2.07 (52.6)
1.24 (31.5)
0.15 (3.8)
0.58 (14.7)
3/8
-PB6-6
2.25 (57.2)
1.31 (33.3)
0.27 (6.9)
0.72 (18.3)
1/2
-PB8-6
2.61 (66.3)
1.51 (38.4)
0.37 (9.4)
0.86 (21.8)
3/4
-PB12-6
3.86 (98.0)
2.14 (54.4)
0.61 (15.5)
1.22 (31.0)
RUBBER
Unions
82
SS - PB 4 TA4 PM4 - 28 - BK
5
or
in.
1 Material
End Connections
SS = 316 stainless steel
B = Brass
2 Hose
4 End Connections
4
6
8
12
16
=
=
=
=
=
1/4
3/8
1/2
3/4
1
5 Overall Length
Inches or centimeters, in whole
numbers. Include CM as shown for
centimeter lengths.
71CM - BK - CRN
cm
6 Hose Color
=
=
=
=
RUBBER
83
Options
Covers
Covers do not change hose technical data.
lubricating oils.
Provides insulation from internal
and abrasion.
Covers entire length of hose.
Operating temperature: 325 to 750F
(200 to 398C).
abrasion.
Covers entire length of hose.
Operating temperature: 180 to 250F
(117 to 121C).
Standard colors are blue, black, and yellow.
steel.
Highly flexible, protects
Hose-length version
(optionS2).
Operating temperature: 325 to 850F (200 to 454C).
Testing
These tests are in addition to the standard testing performed
on each hose series.
Nitrogen gas bubble leak test at 200 psig (13.7 bar), not to
84
Options
Tags
Lanyard Tag (Option T)
aluminum clamp.
specified text.
See Hose Tag Text table for details.
bands.
For Example
1.
Ordering number
2.
3.
4.
5.
Process line
Location
Supplier phone number
Date of manufacture
Approvals
Alternative Fuels-Type Approval (Option 093)
Select T series hose assemblies and 8R series hose
assemblies are available tested, tagged, and approved
to ECE R110. See the table for the nominal sizes and end
connections available.
T Series Carbon Black-Filled PTFE Hose Assemblies:
Operating temperature 40 to 248F (40 to 120C)
Maximum working pressure 435psig (30 bar); pressure
classification 1.
8R Series Hose Assemblies:
Operating temperature 40 to 185F (40 to 85C)
Maximum working pressure 3770psig (260 bar); pressure
classification 0.
3/8 in.
1/2 in.
Metric Swagelok
tube fitting
SM6, SM8
SM8, SM10
SM10, SM12,
SM16
Fractional Swagelok
tube adapter
TA4, TA5
TA6
TA6, TA8,
TA10
Metric Swagelok
tube adapter
TM6, TM8
TM8, TM10
TM10, TM12,
TM16
Male NPT
PM4
PM4, PM6
PM6, PM8
Male ISO/7
MT4
MT4, MT6
MT6, MT8
AN4
AN6
AN8
Male SAE/MS
(ECE R110approved Oring)
ST2, ST4
ST4, ST6,
ST8
ST6, ST8,
ST10
85
Options
Availability
Availability of options by hose series is shown below, but may be limited by hose size.
Applications, hose operating parameters, and hose length must be considered when selecting options.
Hose Series
T
NG
7R
8R
7N
8N
7P
Armor guard
Spiral guard
FM
FJ
FL
Fire jacket
Thermosleeve
Spring guard
Hose length
Spring guard
6 in. long
CT
316L SS braid
Std
Hydrostatic testing
Nitrogen pressure
testing
Lanyard tag
Rubber
Clamp tag
Mat tag
Perma tag
Alternative fuels-type
ECE R110
Fluoropolymer
Metal
Hose Core
Approval
PB
Polyethylene
Std
Nylon
Tags
Testing
Covers
Options
nominal size.
Ordering number: MS-HC-SC-1A
Replacement blade ordering number: MS-HC-SC-1A-BLD
See next page for assembly tools for nylon, polyethylene, and rubber hose.
86
Power Swager
Push-On Tool
Portable, manually
operated tool
for attaching
end connections
to nylon and
polyethylene hose.
Stationary,
electrically
powered tool for
attaching end
connections
to nylon and
polyethylene hose.
aluminum.
Attaches
Swagelok end
connections to 1/4 to 1 in. hose.
1in. hose.
Bench mounting required.
10 in. (25 cm) H, 14 in. (36 cm) W,
Pushers
Lubricant
MS-TP-LUBE
Vise Blocks
Ordering numbers:
MS-IGB-1 for hose
size designators 4,6, and 8
Ordering numbers:
Ordering number:
Pusher
Ordering
Number
Swage Die
Ordering
Number
Dimensions, in.
1/4
1/4
1/4
3/8
3/8
1/2
1/2
5/8
1/2
3/4
3/4
MS-P-TA4
MS-P-4TA6
MS-P-TA6
MS-P-SLTA8
MS-P-8TA10
MS-P-TA12
MS-7R8R-4
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
MS-7R8R-8
MS-8R-12
MS-P-TA16
MS-8R-16 /
MS-7P-16
MS-P-TA4
MS-P-4TM8
MS-P-TA6
MS-P-SLTA8
MS-7R8R-4
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Dimensions, mm
6
1/4 in.
8
1/4 in.
10
3/8 in.
12
1/2 in.
Swage Die
Ordering
Number
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Dimensions, mm
6
8
10
12
1/4 in.
MS-P-SL4
MS-7R8R-4
MS-7R8R-4
1/4 in.
MS-P-4SM8
1/4 in.
MS-P-4SM10 MS-7R8R-4
3/8 in.
MS-P-SL6
MS-7R8R-6
1/2 in.
MS-P-SLTA8
MS-7R8R-8
Nominal
Hose
Pusher
Size
Ordering
in.
Number
1/4
MS-P-AS4
3/8
MS-P-AS6
1/2
MS-P-AS8
Pusher
Ordering
Number
MS-P-PM4
MS-P-PM6
MS-P-PM6
MS-P-PM8
ISO/BSP
Parallel, Nominal
60 Male
Hose
Pusher
Cone Size
Size
Ordering
in.
in.
Number
1/4
1/4
MS-P-MS4
3/8
3/8
MS-P-MS6
1/2
1/2
MS-P-MS8
Swage Die
Ordering
Number
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Nominal
Hose
Pusher
Size
Ordering
in.
Number
1/4
MS-P-BM4
3/8
MS-P-BM6
1/2
MS-P-BM8
Swage Die
Ordering
Number
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Nominal
Hose
Size
in.
Pusher
Ordering
Number
Swage
Die
Ordering
Number
1/4
1/4
MS-P-BS4
MS-7R8R-4
3/8
3/8
MS-P-BS6
MS-7R8R-6
1/2
1/2
MS-P-BS8
MS-7R8R-8
Swage Die
Ordering
Number
MS-7R8R-4
MS-7R8R-6
MS-7R8R-6
MS-7R8R-8
Universal
Globe
Seal,
Metric
Female
Nominal
Swivel Nut Hose
Pusher
Size
Size
Ordering
mm
in.
Number
14
1/4
MS-P-MC14
18
3/8
MS-P-MC18
22
1/2
MS-P-MC22
Swage
Die
Ordering
Number
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
87
Additional Products
Tube Fittings
Pipe Fittings
Quick-Connects
See the Swagelok
QuickConnects catalog,
MS01138, for more
information.
Warranty Information
Swagelok products are backed by The Swagelok Limited
Lifetime Warranty. For a copy, visit swagelok.com or contact
your authorized Swagelok representative.