MBC
MBC
MBC
P2
LPG
Fuel oil
Ethanols
Ammonia
transfer of media.
Propane
Sulphuric Acid
Bitumen
Jet Fuel
Hydrochloric Acids
Chlorine
Diesel
P3
K1 sizes: 1 1/2 to 12
The KLAW Breakaway Coupling has breakstuds that hold the two halves of the coupling together.
Its purpose is to resist external loads and line pressure up to a pre-determined point.
The unit activates when it is subjected to forces higher than the breakload setting.
P4
Cable release
Hydraulic release
Spring retained
Dual release
P5
1. Valve mechanism
is in open flow status.
2. Collar Release
is activated via the
Release System.
Valves start to
close as the unit
separates.
4. Collar Release
is detached and
the coupling is
separated.
DRY DISCONNECT
DRY DISCONNECT
Square handle twin grip
Materials
Aluminium, Stainless
Steel and Brass.
DRY DISCONNECT
All round handle grip
P6
Flange Camlocks
Swivel Joints
lM
aterials
hose handling
lA
vailable
sizes 1/4 to 40
lP
ressure
lT
emperatures
lE
nd
connections
lT
op
side or subsea
Weld Neck
Studded
Slip-on
Other variants
P7
lE
xtends
lR
educes
Permanently
positioned seal increases
efficiency and safety.
l Cams cannot be loosened when line
is pressurised.
lA
ids
www.klawproducts.com
Product descriptions and specifications are subject to change without prior notice. KLAW recommends that all information and data are confirmed with our technical department before specifying, ordering or commissioning.
Copyright All information provided is subject to international copyright, trademark and patent laws and cannot be reproduced without the expressed and written permission of KLAW Products Ltd.
Trademarks protected: KLAW K1C K2C QS Square Grip QS Round Grip. Protected by Worldwide Patents.
K.CA.E1402D
www.klawproducts.com