Structural Audit

Welcome to Constrotech
Consultants Pvt Ltd

We, Constrotech Consultants Pvt Ltd who are in the field of
Civil Engineering offering Multicore Services for the benefit
of our Esteemed Clients One of our activities is offering
consultancy services regarding Non Destructive Test. Non
Destructive Test is a wide group of analysis technique used
in Civil Engineering to evaluate the properties of materials,
components or system without causing damages. NDT does
not alter structures / complexes being inspected which is a
highly valuable technique that can save both money and
time in evaluation, trouble shooting etc. NDT is commonly
used in Civil Engineering and System Engineering.
About Us
We, Constrotech Consultants Private Limited consists of are a team of
four Directors. specialized in Project Management Consultants, who
are very highly qualified in Civil Engineering stream and have achieved
a niche in professionalism. This team provides leadership in as much as
in depth study, penetration into most modern technologies and
adopt such methodologies, wherever is needed. Its experience is the
wealth of our organization, which puts into the upper layer of broad
spectrum of Civil Engineering.
This Company serves as a trouble-shooter in its offer of services of
Project Management and is akin to adopt modern methods in
rendering of Consultancy Services to our clients who approach us to
avail our services. In the coming years, our organization will be known
for its technical know how, knowledge combined with experience it
has gained over the time and it will set as a goal to be approached by
service seekers in regard to construction , repairs and retrofitting ,
restoration and rehabilitation etc.
Vision
To emerge as one of the most- sought- of PMCs not only in
Mumbai, but all of our nation and towards achievement of this
ambition, we have readied ourselves to spur the wheel of the
goal in our own way to offer excellence in our services. One of
our objectives is to make our clients to feel free after assigning
the work to us and customize them at the end with feel-happy
with our services.
Mission
To ensure our clients to return to us for their new projects and
while aspiring for this situation, offer them new benchmarks in
our sphere of consultancy and thereby make them spread our
name for Technology, Methodology, par-excellence-in-quality,
and trust-worthy.
Services
Project
Management
Consultancy
Non
Destructive
Testing
Evaluation of
Tender
Distress
Mapping
Structural
audit
Project Management Consultancy

A project management consultancy is a professional consulting firm
with knowledge and experience in the specialized area of assisting
organizations to improve their practice of project, program and/or
portfolio management. Throughout this document, we will use the
term project management to represent all the disciplines of project,
program and portfolio management as well as the supporting
environment. Their Job is to assist both the clients and contractors to
involve in the specified job with a clear idea of proceeding with repairs
job. Hence the role of project management consultant (PMC ) is very
important in the whole gamut of the proposed assignments of project
work. PMC will evolve a proper strategy, administration, defining BOQs
and Terms and Conditions of the impending tender.
This guide is developed to assist organizations in the selection of an
appropriate project management consulting firm for their specific
needs or business objectives.
Evaluation of Tender
BUDGET ESTIMATE PREPARATION AFTER SURVEY CONDUCTION:To conduct survey and prepare budget estimates
Evaluations of Tender, invitation f bids and finalization of contractor.
We now list below our role in various segments of the project
Inspection and preparation of Survey report : Before imitating repair work, we thoroughly survey
internal & external of the structure along with individual residential places to assess the following
Evaluation of Budget Estimate
Here, the survey report will play a Key role to work out the possible repairs mechanics taking in
to the quantities of inputs needed and prepare the estimate accordingly.
Tender preparation, invites of bids and selection of contractor:
After an approval of Plan of action and Budget Estimates we start complaining Tender documents
for the repair work. A Tender is an important document which will denote the quality and the out
go of the repair project. The details of work to be carried out as per the Technical specifications
listed in the Tender to bind the Contractor to follow the same strictly.
How to select a Contractor :
The final steps before start of the repair project is bid invites from contractor. We give the details
of work of the project duly selected carefully and invite technically and financially a sound
contractor to give their quotes for the same. All sealed Tenders will be opened in your presence
and go ahead to prepare a comparison report based on detailed study of all quotes.
Structural Audit
The General health and performance of a building depends on its quality of maintenance. As a
building grows old, ageing, use (or misuse) and exposure to the environment can affect the
health of the building significantly.
When to do Structural Audit???
Structural Audit must be carried out once in 5 years and for buildings older than 30 years it
should be carried out once in 3 years. You may, however, go for it even earlier if you suspect the
condition of your building to be bad.
How it is carried out??
The Consultant carries out as a visual survey of the building covering its faces, stilts, staircase,
terrace, flats and ancillary structures such as pump room, compound wall etc. repair history of
the building and specific observations / experiences of the members are also noted. Critical
observations, probable causes of distress, remarks on structural health and recommendations for
further action are given in the Structural Audit Report.
Why Structural Audit / Status Report??
Exact details of Distress at Columns/ beams / slabs (cover or core) 25 % 50 % 75 % are
known.
Additional proof of sound structure before purchase or sale flat.
Members can understand the exact status / condition of their individual flat.
Sample Structural Audit. The Buildings are visited and inspection carried out for:
(A) Structural Defects & Failures.
(B) Seepage & Leakage Defects.
(C) Plaster Defects.
(D) Plumbing Defects & Leakages.
Non Destructive Testing
Ultrasonic Pulse
Velocity Test
Radar Testing of
Concrete
Rebound Hammer Test
Carbonation of
Concrete
Distress Mapping
Distress Mapping denotes indication of poor or unfavorable conditions of the structure which
means performance or signs of impending failure.
1. Due to heavy leakages for longer duration resulting in corrosion of structural members.
2. Very bad maintenance not taking any corrective measures in time.
3. Use of substandard material during constructions.
4. Improper designing resulting in sagging of beam & slab.
Measures of distress can be either subjective on visual inspection. A simple example of a
subjective measurement may be rating of each type of defect based on visual inspection on a
scale of 0-5 as Very Poor, Poor, Fair, Good and Very Good.
Details of Inspection to be held shall be as under
(1) Any Settlements in the foundations
(2) Visual Cracks in column, beams and slabs.
(3) Concrete disintegration and exposed steel reinforcement photographs can be helpful.
(4) Slight Tapping with hammer can reveal deterioration in concrete.
(5) Extent of Corrosion in reinforcement.
(6)Status of balconies sagging , deflection , cracks ?
(7) Leakages from Terraces and Toilet block.
(8) Changes carried out affecting structures.
(9) Status of Lift, Lift Machine Room, overhead and Underground Water Tank.
(10) Status of Repair and Last Repairs
Projects
Sushita CHS 1
Rajiv CHS 1
Polydrug Lab
Orbit tower
BSE
Belveder Court
Our Team
Head of Projects: - BE (Civil)
Project Management Services.
Experienced in Building Repairs Execution.
Advanced Studies on Construction Management.
Head of Technical: - BE (Civil)

Thorough knowledge of commencement of projects.
Device methods of implementation of projects.
Arrange proper inputs to examine prospective proposals.
Head of Monitoring Projects:

Initiate to know the ground realities of the incoming projects.
Arrange Non-destructive Test to ensure to know present conditions.
Collect data, analyze, commence in-depth studies of operations.
Contact Us
Company :CONSTROTECH CONSULTANTS PVT LTD
Address :Shop No 9, Sri Anant Bhuvan Soc ,
Veer Sawarkar Rd Near Teen Petrol
Pump,Thane (W) 400 602.
Email ID :[email protected]
Telephone : +91 7498523824,
+91 9321725585
Website :http://structuralaudit.co.in

Structural Audit

Uploaded by

Copyright:

Available Formats

Structural Audit

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Structural Audit

Uploaded by

Copyright:

Available Formats

Welcome to Constrotech

Consultants Pvt Ltd

Project Management Consultancy

Non Destructive Testing

Rebound Hammer Test

Head of Technical: - BE (Civil)

Head of Monitoring Projects:

You might also like