MX MX1230 Fire Extinguishing System PDF

GAS EXTINGUISHING SYSTEMS
PB14Ce/01.08/5/01.08/HA
Printed in Germany
CLEAN AGENT SYSTEMS
MX 1230 Fire Extinguishing System using

3MTM NovecTM 1230 Fire Protection Fluid
13449-2_MX1230_englisch.indd 2
Safe for certain.
22.02.2008 13:04:50 Uhr
EFFICIENT +
FAST AND SMOOTH
Lost data, the breakdown of machines and equipment, on which enterprise-critical business processes
are proceeded, or a total breakdown of operations
those are risks, which represent a concrete existential
threat for every company. Companies with unique
and high-value technical equipment and central
IT systems are dependent on the high availability of
these critical operating resources. This is inevitably
leading to growing expectations concerning fire
protection. Here fire extinguishing systems are in
demand, which detect a developing fire in its initial
stage and extinguish it in a exceptionally fast and
protective manner so that even sensitive components
are not damaged e. g. by residues of extinguishing
agent. This is why Minimax has developed the
MX 1230 fire extinguishing system using 3MTM
NovecTM 1230 Fire Protection Fluid. It is characterised
by its fast flooding of the room (< 10 seconds) and
its highly extinguishing effectivity. The extinguishing
agent itself is toxicologically harmless; it extinguishes
without leaving any residue and gets along with a
small storage volume.
A well thought-out system
The MX 1230 fire extinguishing system can be individually adapted to suit nearly every area. Nozzle
holes and container fill volumes are the result of
object-specific design calculations and characterise
a system optimised down to the smallest detail.
The charging pressures of up to 50 bar mean that
multi-zone systems and longer pipeworks can be
designed. No separate space is needed for the supply
of extinguishing agent, it can be located in the
protected area itself.
Mode of operation
When a starting fire is detected by one of the automatic fire detectors or when a push button is activated, the fire detection control panel sets off a fire
alarm. After an object-related delay time the pressurised extinguishing agent cylinders are opened either
electrically or pneumatically. The extinguishing agent,
still liquid at this point, flows to the extinguishing
nozzles where it vaporises and rapidly and effectively
floods the room.
The extinguishing agent Novec 1230
The fire extinguishing agent Novec 1230 extinguishing agent acts both physically and chemically.
Novec 1230 is widely used throughout the world
and thanks to its environmental properties it has
become established in many countries as the extinguishing agent for manageable IT and electrical risks.
Novec 1230 is suitable for class A and class B fire
and is used as total flooding agent. It is neither corrosive nor electrically conductive and therefore causes
no damage through short circuits or through residues
left on sensitive components. It is colourless and
almost odourless and is in gaseous form at room temperature. Its molecules consist of carbon, fluorine and
oxygen. Novec 1230 deprives the flames of heat,
thus interrupting the combustion reaction.
MX 1230 fire extinguishing systems

efficient fire protection for rooms with electrical
and electronic installations
22.02.2008 13:04:53 Uhr
CLEAN
GAS EXTINGUISHING SYSTEMS

CLEAN AGENT SYSTEMS
EXTINGUISHES WITHOUT LEAVING ANY RESIDUE
A guaranteed future-safe extinguishing agent
Safety of persons
As manufacturer of the extinguishing agent

Novec 1230 the company 3M came up
with the idea of the 3M Blue Sky Warranty
for the extinguishant: If in the future the
extinguishing agent is banned or its use
restricted because of its ozone depletion
potential or global warming potential then
3M will refund the purchase price.
Novec 1230 has an outstanding safety factor,

reaching the NOAEL value (No Observed
Adverse Effect Level) of 10 %. When used to
protect IT rooms this safety factor is 78 %
measured for the release concentration of
5.6 % in accordance with DIN ISO 14520-5.
This is another reason why the fire protection
working group of the Employers Liability
Insurance Associations confirms that Novec
1230 is a safe extinguishing gas, particularly
when used for areas frequented by persons.
In its plan for new alternative extinguishing
agents (SNAP Program = Significant New
Alternatives Policy Program), the USAs EPA
(Environmental Protection Agency) certifies
Novec 1230 as harmless when used as an
extinguishing agent for flooding areas where
people are present.
NovecTM 1230 of 3MTM

Chemical formula
CF3CF2C(O)CF(CF3)2
Chemical name
Dodecafluro-2-methylpentane-3-one
ISO designation
FK-5-1-12
Specific weight (20 C)
1.6 kg/l
State of aggregation
Liquid (at 25 C /1.013 bar)
Boiling point
49.2 C (1.013 bar)
Environmental properties
No ozone depletion
potential (ODP 0)
Low global warming
potential (GWP 1)
Atmospheric lifetime
<5 days
Safety factor at the design

concentration
NOAEL 10 % by volume
(no observed adverse effect level)
The highest extinguishing gas concentration
in % by vol., at which no detriments to health
have been observed.
LOAEL >10 % by volume
(lowest observed adverse effect level)
The lowest extinguishing gas concentration
in % by vol., at which detriments to health
have been observed.
22.02.2008 13:05:03 Uhr
ADVANTAGES
MX 1230 FIRE EXTINGUISHING SYSTEM

Very high environmental compatibility

An extinguishing agent where its use
in the future is protected by the 3M
Blue Sky Warranty
Optimised system design by using
professional MX 1230 calculation software
Robust design, so low installation and
maintenance costs
Rapid extinguishing effect
Exceedingly safe for use in occupied areas
No extinguishing agent residues, neither
corrosive nor electrically conductive
Higher operating pressure possible than
comparable systems, so
longer pipeworks and
multi-zone systems can be achieved
Compact and space-saving
Approved system (VdS)
World-wide recognised and approved
extinguishing agent
What youre looking for:

MX 1230 system types from A to Z

Available cylinder sizes:

22, 25, 40, 50, 80, 100, 140, 180 litres
Pressure stages available: 25, 42, 50 bar
Single- or multi-cylinder systems
Single- or multi-zone systems
Example of a multi-cylinder system
Example of use
EDP
Design
concentration*
Minimum usage
quantity
5.6 % by volume
82.5 kg/100 m3
*(ISO 14520-5) / EN 15004-2 (draft)
Printed in Germany
carbon
fluorine
Minimax GmbH & Co. KG

Industriestrasse 10/12
23840 Bad Oldesloe
Germany
Phone: +49 4531 803-0
Fax:
+49 4531 803-248
E-mail: [email protected]
www.minimax.de
No. S 89201
Novec 1230 molecule
Certified according to
ISO 9001
PB14Ce/01.08/5/01.08/HA
oxygen
Right reserved to make technical changes.
22.02.2008 13:04:44 Uhr

MX MX1230 Fire Extinguishing System PDF

Uploaded by

Copyright:

Available Formats

MX MX1230 Fire Extinguishing System PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MX MX1230 Fire Extinguishing System PDF

Uploaded by

Copyright:

Available Formats

GAS EXTINGUISHING SYSTEMS

CLEAN AGENT SYSTEMS

MX 1230 Fire Extinguishing System using

Safe for certain.

22.02.2008 13:04:50 Uhr

MX 1230 fire extinguishing systems

22.02.2008 13:04:53 Uhr

GAS EXTINGUISHING SYSTEMS

EXTINGUISHES WITHOUT LEAVING ANY RESIDUE

A guaranteed future-safe extinguishing agent

As manufacturer of the extinguishing agent

Novec 1230 has an outstanding safety factor,

NovecTM 1230 of 3MTM

Specific weight (20 C)

Liquid (at 25 C /1.013 bar)

49.2 C (1.013 bar)

Safety factor at the design

22.02.2008 13:05:03 Uhr

Very high environmental compatibility

What youre looking for:

Available cylinder sizes:

Example of a multi-cylinder system

*(ISO 14520-5) / EN 15004-2 (draft)

Minimax GmbH & Co. KG

Novec 1230 molecule

Right reserved to make technical changes.

22.02.2008 13:04:44 Uhr

You might also like