Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    Seminar Topics Revised

    Uploaded by

    Parth Mandanaka
    This document lists 47 seminar topics for the M Tech CAD/CAM program at CSPIT - CHARUSAT. The topics are divided into 15 groups covering subjects like composites, coatings, heat exchangers, foundries, machining processes, engine design, manufacturing, and alternative fuels. Each group is assigned a different supervisor from the Mechanical Engineering department.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Seminar Topics Revised

    Uploaded by

    Parth Mandanaka
    37 views2 pages
    This document lists 47 seminar topics for the M Tech CAD/CAM program at CSPIT - CHARUSAT. The topics are divided into 15 groups covering subjects like composites, coatings, heat exchangers, foundries, machining processes, engine design, manufacturing, and alternative fuels. Each group is assigned a different supervisor from the Mechanical Engineering department.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document lists 47 seminar topics for the M Tech CAD/CAM program at CSPIT - CHARUSAT. The topics are divided into 15 groups covering subjects like composites, coatings, heat exchangers, foundries, machining processes, engine design, manufacturing, and alternative fuels. Each group is assigned a different supervisor from the Mechanical Engineering department.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    37 views2 pages

    Seminar Topics Revised

    Uploaded by

    Parth Mandanaka
    This document lists 47 seminar topics for the M Tech CAD/CAM program at CSPIT - CHARUSAT. The topics are divided into 15 groups covering subjects like composites, coatings, heat exchangers, foundries, machining processes, engine design, manufacturing, and alternative fuels. Each group is assigned a different supervisor from the Mechanical Engineering department.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    CSPIT CHARUSAT

    Department of Mechanical Engg.


    M Tech CAD/CAM (2nd Semester, 2014-2015 Batch)

    Sr No.

    Seminar Topics

    Digital image analysis of Delamination Factor in composites

    Determination of volume fraction of composite by image analysis


    technique

    Study of multi objective optimization techniques

    FEA of drilling using abaqus software

    Development & Characterization of Hybrid PMC

    Development of Functionally Graded Composite Materials

    Fillability (Fluidity) Study of Metal-Matrix Composite Materials

    Feedability Study of Metal-Matrix Composite Materials

    Study of Particle Dispersion and its Effect on Solidification Front during


    Manufacturing of Metal-Matrix Composite through Liquid Metal
    Processing Route

    10

    Part Shape Complexity and Its Influence on Solidification Behavior during


    Processing of Metal-Matrix Composite using Liquid Metal Route

    11

    Study and Evaluation of Reactive Wetting Kinetics during Processing of


    Mg Alloys at Elevated Temperature

    12

    Study the Influence of Mould Permeability on Melt-Mould Reactions


    during Processing of Mg Alloys

    13

    Synthesis and investigation of zirconium based coatings

    14

    Wettability studies of chromium based coatings

    15

    Processing and studies of tantalum based coatings

    16

    Processing and investigation of hafnium oxynitride coatings

    17

    Tribological properties of titanium oxynitride coatings

    18

    Synthesis and characterization of zirconium oxynitride coatings

    19

    Investigation of tribological properties for chromium oxynitride coatings

    20

    Processing and characterization of molybdenum based coatings

    21

    Numerical investigation of performance of cross flow heat exchanger.

    22

    Experimental investigation of heat pipe for cooling of electronics system

    23

    Evaluation Cost electiveness of abatement options for emissions control in


    Indian iron foundries

    24

    Employment of foundry wastes in India

    25

    A Multi Faceted Approach to Energy Conservation in Foundries through


    energy efficient practices.

    26

    Barriers to industrial energy efficiency in foundries with current trends

    27

    LCA as a decision support tool for evaluation of best available techniques


    (BATs)

    Supervisor

    Prof. Vijay Chaudhary


    Prof. Kundan Patel

    Prof. Mayur Sutaria


    Prof. Vishal Mehta

    Dr. Sushant K. Rawal


    Prof. Kamlesh
    Chauhan
    Prof. Kartik Patel

    Prof. Dattatraya
    Subhedar

    Prof. Gajanan Patange

    CSPIT CHARUSAT
    Department of Mechanical Engg.
    M Tech CAD/CAM (2nd Semester, 2014-2015 Batch)

    28

    Viscous damper Design for automobile suspension.

    29

    MR Fluid damper for washing machine

    30

    Characteristics of MR fluid

    31

    Developed ultra fine grain structured by equal channel angular pressing

    32

    Metallurgical effect of cryogenic temperature on metal forming and


    machining

    33

    Comparision of Portevin Le Chatelier effect on room temperature and cryo


    temperature deformation

    34

    FEA analysis of machining process with Abaqus

    35

    Cryo machining

    36

    Non traditional optimization

    37

    Micro machining on EDM

    38

    Design of pump less lubrication system in engine.

    39

    Design and analysis of connecting road considering cyclic loading and


    durability

    40

    Design and Optimization of engine induction system to improve


    combustion behavior

    41

    Different approaches to design and develop robust engine

    42

    Acoustic air condition system for vehicle

    43

    Production and Lean manufacturing process- case study

    44

    Design and optimization of variable geometry turbocharger (VGT) for


    vehicle

    45

    Production and utilization of charcoal slurry as an alternate fuel

    46

    Development of dual fuel engine

    47

    Design and optimization of exhaust manifold position in engine

    Prof. Dipal Patel

    Prof. Kandarp
    Changela

    Prof. Shilpesh
    Rajpurohit

    Prof. Kalpesh Vaghela

    You might also like