PROFESSIONAL CATALOGUE

CHEMICAL TREATMENTS

Fuel System Diesel

Fuel System - Diesel

Both modern cars and older vehicles have specific requirements, that have a chemical solution to provide the optimal engine performance and
driving comfort. Modern fuel systems are highly tuned and therefore more susceptible to the negative effects of chemical reactions in the fuel.
These lead to fouling of the fuel system, lack of lubrication, corrosion and other problems.
Older vehicles experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits in the fuel
system and wear on the components.

Diesel Power 3

Premium
product

Premium

product
Diesel
Particulate Filter
Regenerator

Diesel Particulate
Filter Regenerator
1/500

Diesel System
Cleaner

Ref. Nr. 28095 - 1 litre

Ref. Nr. 46754 - 24x325 ml

Extreme emission
reducer based on cerium
nanotechnology.

Cleans and regenerates a

blocked diesel soot filter
of diesel engines. Reduces
soot emissions by cerium
nanotechnology.

Clears blocked particulate

filters of commercial diesel
engines and reduces
soot emissions by cerium
technology.

Cleans and lubricates pumps

and injectors.

Properties

Properties

Properties

Properties

Instantly reduces exhaust emissions

and soot.
Improves combustion, engine
performance and fuel economy.
Regenerates diesel particulate
filters.

Easily cleans and regenerates a

blocked diesel soot filter without
dismantling.
Catalyst for optimized combustion
and decreased soot build-up.
Reduces the combustion
temperature of soot so that the
soot particles burn faster and at a
lower temperature.
Restores the engine power.
Avoids frequent maintenance costs
related to the manual regeneration
of the blocked soot filter.
Can be used in combination with
built-in regeneration systems.
Super-fast result!

Easily cleans and regenerates a

blocked diesel soot filter without
dismantling.
Catalyst for optimized combustion
and decreased soot build-up.
Reduces the combustion
temperature of soot so that the
soot particles burn faster and at a
lower temperature.
Restores the engine power.
Avoids frequent maintenance costs
related to the manual regeneration
of the blocked soot filter.
Can be used in combination with
built-in regeneration systems.
Super-fast result!

Cleans pumps and injectors.

Restores original spray pattern
resulting in a better combustion.
Compensates lack of lubricity of
low sulphur fuels.
Protects against rust and corrosion.

Applications

Applications

For diesel engines with all types of

diesel particulate filter.
For diesel and biodiesel up to B30.

For commercial diesel engines with

all types of diesel particulate filter.
For diesel and biodiesel up to B30.

Directions

Directions

Add to the fuel tank.

Add one bottle of 500 ml to
minimum 40 litres of diesel fuel.

Only add to the fuel tank.

Add one can to minimum 200 litres
of diesel fuel in the fuel tank.
One litre treats 500 litres diesel fuel.

Ref. Nr. 50393 - 12x500 ml

Applications
For all diesel engines, including
common rail and pump injector
engines.
For diesel and bio diesel up to B30.
Harmless for catalytic convertors
and Diesel Particulate Filters.

Directions
Use every 10.000 km (6000 miles).
One bottle treats 50 litres of diesel
fuel.

Ref. Nr. 28392 - 12x500 ml

Cerium technology
Reduces the required
Without cerium
combustion temperature of
soot particles (from 650C to
400C) so that the combustion
of the soot particles accelerates.
As a result the amount of soot is
considerably reduced at lower
black smoke
exhaust temperatures.

With cerium

no smoke

Applications
For all diesel engines with or
without turbocharger.

Directions
Add one bottle of 325 ml to the
diesel fuel tank every 7.500 km to
10.000 km.

Premium
product

Diesel
EGR 3

Premium
product

Ice Proof
for Diesel

Diesel
Clean-up

Ref. Nr. 12293 - 12x500 ml

Ref. Nr. 23379 - 12x200 ml

Ref. Nr. 22795 - 12x1 litre

Ref. Nr. 25241 - 24x325 ml

Extreme cleaner of the diesel

fuel system in one tank filling.

Cleans the air intake system,

air flow sensor, inlet valves,
turbo and EGR system.

Improves diesel fuel fluidity at

low temperatures

Cleans the diesel fuel systems.

Concentrated product for
immediate application.

Properties

Properties

Properties

Properties

Instantly cleans the injectors

and keeps EGR valves and
turbochargers clean.
Restores combustion and engine
performance.
Effectively protects and lubricates
injectors and pumps.

Provides immediate thorough

cleaning of air intake system, air
flow sensor, inlet valves, turbo and
EGR system.
Dissolves gum, lacquer, tar, carbon
and deposits.
Provides a regular and stable idle.

Slows down the formation of wax

crystals in the diesel fuel at low
temperatures.
Prevents settling of wax crystals in
the tank.
Can depress the CFPP (Cold Filter
Plugging Point) up to -30C.

Applications

Applications

Applications

For all diesel engines, including

common rail and pump injector
engines.
For diesel and bio diesel up to B30.
Harmless for catalytic convertors
and diesel particulate filters.

For all diesel engines.

Harmless for catalytic convertors
and Diesel Particulate Filters.

For all diesel engines with or

without turbocharger.
For diesel fuel mixed with max. 30
% bio diesel.
Also suitable for diesel fuels used
for heating and off-road fuels.

Concentrated undiluted diesel fuel

system cleaner.
Restores injector spray pattern.
Decarbonises the combustion
chamber.
Restores compression and improves
combustion.
Reduces black smoke, soot and
exhaust emissions.
Lubricates the fuel pump.

Directions
For best results use one bottle in
a half-full tank ( 20 litres of diesel
fuel).
Repeat every 10.000 km (6000
miles).

Directions
See QR-code on the label and
technical sheet for preventive and
curative cleaning.
Recommended to be used at
each service interval to maintain
cleanliness.

For a complete engine cleaning, we recommend using both:

Diesel Clean 3 (Liquid): curative treatment
Cleans the fuel system; the wet part of the engine.
Diesel EGR 3 (Aerosol): curative treatment
Cleans the air intake manifold and the inlet valves; the dry part of
the engine.

Fuel System - Diesel

Diesel
Clean 3

Applications
For all diesel engines with or
without turbocharger, including
common rail engines.

Directions

Directions

Add to diesel fuel tank or storage

tank before fuel temperature drops
below 5C.
Add 1 litre to 1.000 litres of fuel.

Add immediately to the diesel fuel

filter or housing.
Do NOT add to fuel tank.

All fuel treatments are harmless

for catalytic convertors and
diesel particulate filters.
For further information:

See Safety and Technical Data Sheet.

Fuel System - Petrol

Fuel System Petrol

Premium
product

Petrol
Clean 3

Petrol
EGR 3

Petrol
Power 3

Premium
product

Fuel System
Cleaner

Ref. Nr. 29793 - 12x500 ml

Ref. Nr. 29879 - 12x200 ml

Ref. Nr. 29393 - 12x500 ml

Ref. Nr. 61354 - 24x325 ml

Extreme cleaner of the petrol

fuel system in one tank filling.

Air intake, inlet valves, air flow

sensor and EGR cleaner.

Extreme fuel economy for

petrol engines and reduces
exhaust emissions.

Maintains the cleanliness of

the fuel system and reduces
the octane requirement
increase.

Properties

Properties

Properties

Properties

Instantly cleans and protects

the injectors and restores and
maintains ideal injector spray
pattern.
Restores the combustion and the
performance of the engine.
Reduces CO and HC exhaust
emissions.

Provides immediate thorough

cleaning of the air intake system,
air flow sensor, inlet valves and EGR
system.
Dissolves gum, lacquer, tar, carbon
and varnish.
Restores or maintains the engine
performance.
Provides a regular and stable idle.

Reduces CO and HC emissions.

Cleans and protects injectors, inlet
valves and the EGR system.
Improves combustion, engine
power and fuel economy
Protects the engine when using
E10 fuel.

Prevents the formation of deposits

in the carburettor and on injectors
and valves.
Lubricates the injectors, the inlet
valves, fuel system and upper
cylinder area.

Applications
Recommended for all petrol
engines (injection, direct injection
or carburettor).
For petrol and bio petrol up to E10.
Harmless to catalytic convertors.

Directions
One bottle of 500 ml treats 50 litres
of petrol.
Repeat the treatment every 10.000
km (6000 miles).

CO-emission
Before
After

Applications
For all petrol engines
Harmless to catalytic convertors.

Directions
See technical information sheets
for cleaning the air intake system,
air flow sensor, inlet valves and EGR
system
Recommended to be used at
each service interval to maintain
cleanliness of the air
intake manifold, inlet valves, air flow
sensor and EGR system of petrol
engines.

-50%

HC-emission
Before
After

-30%

Can reduce the CO-emission up to 50%

and the HC-emission up to 30%.

For a complete petrol engine cleaning, we recommend using both:

Petrol Clean 3 (Liquid): curative treatment
Cleans the fuel system: the wet part of the engine.
Petrol EGR 3 (Aerosol): curative treatment
Cleans the air intake manifold and the inlet valves: the dry part of the engine.

Premium
product

Applications
Recommended for all petrol
engines (injection, direct injection
or carburettor).
For petrol and bio petrol up to E10.
Harmless to catalytic convertors.

Directions
One bottle of 500 ml treats 50 litres
of petrol.
Repeat the treatment every 10.000
km (6000 miles).

Applications
Recommended for all petrol
engines with injection systems or
carburettor.
Harmless to catalytic convertors.

Directions
Add 1 bottle of 325 ml every 2.000
km to the petrol tank. 325 ml treats
40 to 70 litres of petrol.
In case of heavily fouled valves
and injectors, high load and city
traffic : 1 bottle of 325 ml every
topping-up.

Premium
product

Air Intake &

Carburettor
Cleaner

Lead Substitute

Dry Fuel

Turbo
Cleaner

Ref. Nr. 54179 - 12x500 ml

Ref. Nr. 70612 - 12x250 ml

Ref. Nr. 71851 - 24x325 ml

Ref. Nr. 28679 - 12x200 ml

Eliminates dirt and deposits

in the air intake manifold,
on the throttle valve and on
the visible carburettor parts.
Throttle Valve Cleaner.

Protects the valve seats and

reduces their wear when
using unleaded petrol.

Absorbs water in the fuel

system of diesel and petrol
engines.

Cleans and unblocks dirty

turbochargers with a long
lasting effect.

Properties

Properties

Properties

Properties

Strong solvent dissolves and

removes dirt very fast.
Strong power jet spray to support
cleaning action.

Forms a protective and lubricating

coating on the valves and valve
seats, just like the one built-up by
lead in leaded petrol.
Protects the soft valve seats
against premature wear when
using unleaded petrol (prevents
formation of micro welding).
Is safe for the catalytic converter.
Contains a fuel stabilizer: Protects
the fuel against oxidation and
prevents degradation of the fuel
in the tank when the engine is put
out of service for several months.

Protects against rust and corrosion.

Prevents icing in the carburettor
and fuel filter.
Provides a better cold start
performance.

Cleans and unblocks dirty

turbocharger geometry with or
without dismantling.
Strong, cleaning foam which
dissolves gum, lacquer, tar, carbon
and varnish.
Restores turbo power to its
original activity.
Regains optimal air/fuel ratio.
Harmless to exhaust gas aftertreatment systems.

Applications
Spray on visible carburettor parts.
In the air intake system of injection
and carburettor petrol engines.
On throttle valve and choke.
On the positive crankcase
ventilation valve.

Directions
See technical information sheet
for cleaning the carburettor, the
air intake manifold, the throttle
valve, choke and positive crankcase
ventilation valve.

with fuel stabilizer

Applications
For all two- and four-stroke petrol
engines.
For engines of cars, motorcycles
and lawn mowers.

Directions
Add to the unleaded petrol at each
tank filling, preferably before fillingup. Mixture ratio 1:1000 (1 ml per
litre petrol, e.g. 25 ml for 25 litres
petrol).
The content of the bottle (250
ml) is sufficient to treat 250 litres
unleaded petrol.

Applications
Recommended for all petrol and
diesel engines with or without
turbocharger.
For cars, trucks, buses, stationary
and marine engines, storage tanks.
Harmless to catalytic convertors.

Directions
Add to the fuel tank.
Normal dose : add 1 bottle of 325
ml to the fuel tank every 10.000 km.
In humid climate or in case of large
temperature fluctuations : every
5.000 km.

Fuel System Petrol & Diesel

Fuel
System
Petrol & Diesel

Applications
For all diesel and petrol turbo
engines.

Directions
See QR-code on the label and
technical sheet for cleaning of
the turbo (inlet side) without
disassembly and cleaning of a very
dirty turbo (inlet and outlet side)
with disassembly.

Dirty

Clean

After cleaning the turbo, it is

recommended to eliminate the cause
of the dirt accumulation with:
Petrol Clean 3 for petrol cars.
Diesel Clean 3 for diesel cars.

For further information:

See Safety and Technical Data Sheet.

Fuel System Petrol & Diesel

Fuel System
Petrol & Diesel
Fuel Biocide

Super Charge

Ref. Nr. 10601 - 12x250 ml

Ref. Nr. 74944 - 24x325 ml

Curative and preventive

treatment against the
formation of micro-organisms
in fuel.

Improve high temperature viscosity characteristics of

engine oils and prevent rubber/neoprene seal leakages.

Properties

Properties

Applications

Kills bacteria, algae and fungi.

Prevents microbial re-growth.
Is soluble in hydrocarbons and
residual water.
Does not affect the fuel quality, is
completely combustible.
Neutralizes acids, which could be
produced by the micro-organisms.
Prevents filter plugging by
organisms.

Reduces excessive oil consumption

via piston rings and valve guides.
Improves viscosity index of
lubricating oils.
Rejuvenates rubber oil seal rings
and O-rings.
Restores compression and oil
pressure.
Reduces exhaust blue smoke due
to oil consumption.
Will not harm catalytic converters.

Effective under heavy load and

high temperature operation.
Especially effective in older engines.
Compatible with all mineral,
synthetic, single- and multigrade
oils.

Applications

Directions
1 can of 325 ml treats 3 to 6 litres
engine oil (at oil change).
May be added to engine oil
between changes.

For diesel and petrol engines.

To disinfect small fuel tanks (25
500 litres) of trucks, boats, vehicles
and stationary engines.
To prevent microbial contamination
in all reservoirs, supply lines and
filter.

Directions
Add the product just prior to
refuelling.
See technical sheet for curative and
preventive treatment.
Use biocides safely. Always read
the label and product information
before use.

Viscosity increase
Oil temperature 100C

13,7 mm2/s

SAE 10W40 non-treated

SAE 10W40 + 6,5 % Super Charge

17,8 mm2/s

13
mm2/s

7
mm2/s

19
mm2/s

Compression value in bar

Before

After
1
2
3
4
5
6
7
8

1
2
3
4
5
6
7
8
3

11

13

15

17

+30%
3

11

13

15

17

Oil & Transmission Systems

Super Friction
Proofing

Oil System
Cleaner

Engine Oil
Stop Leak

Automatic
Transmission
Treatment

Ref. Nr. 47041 - 24x325 ml

Ref. Nr. 47244 - 24x325ml

Ref. Nr. 77441 - 24x325 ml

Ref. Nr. 64544 - 24x325 ml

A low SAPS oil soluble

supplement improving the
lubricating and cleaning
properties of engine oils and
reducing friction.

Cleans and protects the

lubricating system so
preventing immediate
contamination of fresh oil by
residues left behind.

Stop and prevents engine oil

leaks without dismantling.

Stops and prevents leaks and

eases shifting of automatic
gearboxes.

Properties

Properties

Properties

Properties

Reduces friction and wear.

Conditions metal surfaces.
Prevents oxidation and premature
thickening of the oil.
Stops formation of sludge and
deposits.
Retards fouling of the oil filter.
Does not harm catalytic converters.

Dissolves sludge and keeps the

dissolved impurities in suspension
and prevents their agglomeration.
Cleans the oil circulation system,
hydraulic systems, gearboxes (nonautomatic) and differentials.
Frees piston rings and hydraulic
valve lifters.
Contains EP additives for additional
protection against wear during the
treatment.
Does not harm catalytic converters.

Revitalizes rubber and neoprene

seals of crankshaft, camshaft and
valve stems.
Does not influence oil quality or
viscosity.
Does not harm catalytic converters.

Rejuvenates rubber seals and

O-rings.
Cleans and protects the system
by means of detergents and
dispersants.
Prevents ageing and oxidation of
automatic transmission fluids.

Turbo Protection

Applications
For petrol and diesel engines with
or without turbocharger.
Recommended for old and new
engines after running-in period.
Suitable for regular and low SAPS
applications.
Compatible with all mineral,
synthetic, single- and multigrade
oils.

Applications
For petrol, LPG and diesel engines
with or without turbocharger and
stationary equipment.
Manual gearboxes, differentials and
reduction gears.

Directions

Directions

1 can of 325 ml treats 3 to 6 litres

engine oil (add to engine oil at
every oil change).
May be added to engine oil
between changes.

Also compatible with Low SAPS

oils.
Compatible with all mineral and
synthetic, single- and multigrade
oils

Applications
Recommended for all petrol and
diesel engines of vehicles with
or without turbocharger and
stationary equipment which suffer
from oil loss.

Oil & Transmission Systems

City traffic, traffic jams and short drives lead to higher stress on todays vehicles engine lubrication.
In combination with long oil change intervals, this can lead to a premature degradation of the oil
properties and loss of functionality of the engine components in the oil system.

Applications

Directions

Can be added to all conventional

ATF fluids meeting Dexron II, III
or VI, Ford, LHM or equivalent
specifications. Also for power
steering systems containing ATF
fluid.

One can of 325 ml treats 3 to 6

litres of engine oil.

Directions
1 can of 325 ml treats up to 6,5
litres automatic transmission fluid.
For power steering systems : 50 ml/
litre oil

Friction coefficient
Fully synthetic engine oil
Fully synthetic engine oil
+ Super Friction Proofing

-35%

Less metal wear

For further information:

See Safety and Technical Data Sheet.

Oil & Transmission Systems

H.P.L.S.

Power Steering
Stop Leak

Hydraulic Valve
Lifter Concentrate

Ref. Nr. 59403 - 24x125 ml

Ref. Nr. 59405 - 12x125 ml (blister)

Ref. Nr. 64503 - 24x125 ml

Ref. Nr. 64505 - 12x125 ml (blister)

Ref. Nr. 76844 - 24x325 ml

Improves gear shifting, lowers

gearbox noise and stops oil
leaks.

Stops and prevents leaks in

the power steering system.

Restores efficient working of

hydraulic valve lifters.

Properties

Properties

Properties

Improves anti-wear and viscosity

properties for gearboxes.
Prevents and stops oil leaks.
Eases shifting.
Reduces vibration noises, friction
and wear of gears and differentials.

Prevents and stops oil leaks without

dismantling.
Revitalises rubber and neoprene
seals and O rings.
Prolongs component life.

Releases sticking valve stems and

hydraulic valve lifter components.
Dissolves dirt, gum and varnish
deposits in the oil channels.
Contains EP agents for extra
protection.
Quietens valve train noise.
Does not harm catalytic converters.

Transmission
Treatment (+Stop Leak)

Applications
For steering gears, manual
gearboxes and differentials.
Compatible with all synthetic and
mineral based gearbox oils (also
ATF Dexron, Mercon) and hydraulic
fluids.

Directions
One tube of 125 ml treats 2 litres of
gearbox oil.

Applications
Can be added to all conventional
power steering oils meeting Dexron
II, Dexron III, Dexron VI, Ford,
Citron, LHM, power steering oil G
002 000 for VW-Audi-Seat-SkodaBMW-Porsche-Mercedes-SaabVolvo or equivalent specifications.
Cannot be added to Citron LHS oil.

Directions
One tube of 125 ml treats 2 litres of
power steering oil.

Applications
For petrol and diesel engines with
or without turbocharger.
Compatible with all mineral,
synthetic, single- and multigrade
oils and suitable for regular and low
SAPS applications.

Directions
1 can of 325 ml treats 3 to 6 litres
engine oil.

All oil treatments

can be mixed with one another and are completely soluble in oil.
are compatible with all mineral, synthetic, single- and multigrade
oils and suitable for regular and low SAPS applications.
do not harm catalytic converters and diesel particulate filters.

Cooling System

Cylinder Block Seal

Cooling
System Flush

Cooling System
Stop Leak

Ref. Nr. 72250 - 24x325 ml

Ref. Nr. 45944 - 24x325 ml

Ref. Nr. 45644 - 24x325 ml

Repairs cracks in cylinder

blocks without dismantling.

Thoroughly cleans all

automotive cooling systems.

Stops small leaks in the

radiator and cooling system.

Properties

Properties

Properties

Forms a glass hard layer when

exposed to air.
Repairs cracks in cylinder blocks
of cast iron, steel and aluminium,
without dismantling.
Stops head gasket leaks.
Assures a permanent repair in 30
minutes.
Resists high pressures, water
pressure and vibration.
Does not clog hoses.
Does not repair gaskets (such as
cylinder-head gaskets).

Powerful acid free radiator cleaner.

Dual action: 1. Removes scale. 2.
Eliminates rust, deposits and oily
residues.
Excellent performance in all types
of cooling liquid, including OAT
coolant (Organic Acid Technology).
Safe for rubber hoses, seals and all
metals in the cooling system.

For all water cooled systems of

petrol and diesel engines.

Stops and prevents leakages in

the radiator, cooling and heating
system.
Enhanced protection against rust
and corrosion.
Is compatible with all antifreezes
and coolants, also with OAT
coolants (Organic Acid Technology).
Does not repair split or broken
rubber hoses.
Does not clog rubber hoses.
Will not harm rubber hoses, gaskets
or other system components.

Applications

Directions

Applications

Internal and external cracks in

cylinder blocks, which lead to
external or internal water loss
to the oil system or combustion
chamber.
In case of severe white exhaust
smoke.
In case of coffee coloured oil/water
emulsion in the oil system (can be
seen on filler cap).

Contents of one can of 325 ml

treats systems with capacity up to
12 litres.

For all water cooled systems of

petrol, diesel and LPG engines.

Applications

Cooling System

Cooling system problems, such as leaks and insufficient cooling due to fouling of the
system, are the primary causes of vehicle breakdowns. To prevent these problems
Wynns recommends radiator treatments.

Directions
A 325 ml can treats systems with
capacity 5 -12 litres.

Directions
See technical sheet or peel-off
label.
325 ml treats cooling systems with
a capacity between 4 - 8 litres.

Important
Wynns Cylinder Block Seal is not
compatible with cooling liquids. It
should only be added to water. Do
not pour it into oil or directly into
the cylinders.

In order to obtain the

optimal action of Wynns
Cooling System Flush, we
recommend using the
CoolingServe machine.

For further information:

See Safety and Technical Data Sheet.

Workshop & Service Products

Workshop & Service Products

Viscotene

Silicone
Lubricant

Brake and
Clutch Cleaner

Ref. Nr. 80179 - 12x500 ml

Ref. Nr. 52579 - 12x500 ml

Ref. Nr. 61479 - 12x500 ml

Ref. Nr. 11196 - 4x5 litres

Strongly adhesive and high

viscosity synthetic lubricant.

Silicone based lubricant for

dry lubrication.

Powerful spray product for

cleaning and degreasing of
mechanical parts.

Properties

Properties

Properties

Exceptionally adhesive to surfaces.

Exceptionally water-repellent and
water-resistant.
Reduces and dampens noise of
mechanisms.
Resists steam washout, solvents
and acids.
Compensates for variations in
clearance and pressure.
Reduces wear and corrosion.

Removes oil, brake fluid, grease and

other dirt from metal parts.
Eliminates dust from brake and
clutch parts.
Leaves no residue.

Applications
Mechanisms exposed to moisture,
warm or cold water, detergents,
acids, steam.
Equipment for which conventional
lubricants drip or leak away.

Directions
Apply the product.
Allow solvent to sufficiently
evaporate, prior to further
manipulation of the material.

10

Reduces static electricity.

Prevents sticking of materials.
Is water and moisture repellent.
Does not stick, stain and oxidize.
Prevents stick-slip.

Applications

Applications

On different materials : plastic on

metal, on wood, metal on metal,
profile rubber, etc.
Ignition mechanisms in electrical
systems of vehicles.
Against jamming or freezing of
windows, doors, sliding doors, etc.

Brake parts.
Clutch parts.
Mechanical and other parts of the
car, bicycle, machines, etc.

Directions
Spray on the surface.
Eventually spread with a soft cloth.
Leave to dry.

Directions
Apply by means of brush, cloth or
aerosol allow to run off.
Let the product evaporate, dry by
compressed air or wipe off with a
clean cloth.

Chain
Lube

Starting Fluid

Ref. Nr. 56479 - 12x500 ml

Ref. Nr. 66479 - 12x500 ml

Ref. Nr. 58055 - 12x200 ml

Multifunctional penetrating
oil for lubricating and
cleaning of precision parts.

Strongly adhesive water

repellent lubricant with high
penetrating properties.

Eases petrol and diesel

engine starting at cold
temperatures.

Properties

Properties

Properties

Quickly frees locked, rusted or

corroded parts.
Lubricates and cleans precision
parts and devices.
Repels water and moisture.
Stops squeaking and creaking.
Strong dielectric rigidity.

Helps instant engine starting.

Prevents battery fatigue.

Applications
Rusted joints and fittings.
To lubricate and clean weapons,
cables and precision mechanisms.
To remove humidity on spark plugs
and in distributors.
To remove humidity in the ignition.

Directions
Apply by means of spraycan.

Retards friction and wear.

Resists mud, cold, hot or salt water.
Does not conduct electricity.
Prevents squeaking and creaking.

Applications
Motorcycles and bicycle chains,
chain saws, chain conveyors.
Tools for workshops, DIY and
agriculture.

Directions
Spray on elements to lubricate only.
Let the solvent evaporate.

Workshop & Service Products

Super Rust
Penetrant

Applications
All types of two- and four-stroke
petrol and diesel engines.
Small engines such as outboards,
chain saws, lawn-mowers, a.s.o.

Directions
Spray Wynns Starting Fluid into the
air filter intake for a few seconds
and start immediately. Petrol
engine : slightly accelerate without
choke. Diesel engine : neither
acceleration nor pre-glow.
Smooth engine running accelerates
if spray is applied several seconds
after starting.

For further information:

See Safety and Technical Data Sheet.

11

Air Treatment

Air Treatment

Air quality problems are easily solved with the Wynns air treatments. There is Airco-Clean
to disinfect and clean the aeration and air conditioning system, and Air Purifier to remove
bad smells from the passenger compartment.

Wynns Airco-Clean Cleaner for the air-conditioning system Exclusive use with Wynns Aircomatic equipment.

Ref. Nr. 30205 - 12x100ml

Properties

Applications

Neutralizes microbial contamination, fungi and bacteria.

Removes pollen and nicotine from the evaporator.
Prevents allergic reactions (sneezing, coughing, irritation to
eyes, sore throats).
Cleaning action of the detergents against all impurities.
Cleaning in 15 minutes without demounting of the (pollen)
filters.

Air conditioning systems in cars, trucks and buses.

Use biocides safely. Always read the label and
product information before use.

Directions
See manual of the equipment.

Wynns Air Purifier Deodorizer for passenger compartments

of vehicles - Neutralizes the ozone after an ozone treatment with the
AircomaticIII. - Exclusive use with Wynns Aircomatic equipment.

MOLECULAR
TECHNOLOGY

Ref. Nr. 31705 - 12x60 ml

Properties

Applications

Neutralizes bad smells by means of a chemical reaction with

their molecules.
Instantly removes bad smells like cigarette smoke, pet smell,
body odours, garbage, onion, garlic, food smells, spilled food,
vomit, smell of mildew and damp, wet clothing.
Long lasting effect by means of the molecular technology,
which neutralizes the smell molecules.
Does not mask the smell, but eliminates it.
Due to the fine nebulisation with the Wynns Aircomatic the
entire space is treated.
45 minutes treatment.
In combination with the ozone function on the Aircomatic III,
it provides an even better result.

Passenger compartments and trunk of cars, trucks,

buses, boats,

Directions
See manual of AircomaticIII.

Wynns AircomaticIII Patent pending

with ozone generator and ultrasonic nebulization of Wynns Airco-Clean and Wynns Air Purifier
Ref. Nr. 68480

Properties
Easy and safe to use, no supervision necessary during treatment.
Double function:
Function 1: Cleans and eliminates bad odours in air- conditioning systems.
Ultrasonic cell nebulizes the liquid Wynns Airco-Clean into small drops of < 5 micron.
The outlet tube directs the vapour flow.
Function 2: Removes bad smells from vehicle interior
The ozone generator produces ozone.
The ozone neutralizes bad odours in vehicles and rooms.
After the ozone treatment the equipment automatically nebulizes Wynns Air Purifier.
Wynns Air Purifier enhances the disinfecting power of remaining ozone and accelerates
the natural decomposition to speed up safe re-entry in the vehicle.

Applications
All air-conditioning systems and interiors of cars, trucks and buses.
12 V DC connection.

Directions
See manual.

12

Automatic Transmission Service

Service Machines

Wynns TranServe changes the ATF in automatic gearboxes and cleans the transmission without
dismantling. The Wynns TranServe cleans the oil system of automatic gearboxes with the product Wynns
Automatic Transmission Flush in 10 minutes. Add Wynns Automatic Transmission Treatment to the new
ATF for additional protection of the automatic gearbox parts.

TranServe
Ref. Nr. 68414

Properties

Applications

Cleans the oil system of automatic

gearboxes and restores a good
performance.
Changes up to 90 % old ATF (with the
conventional method, up to 50 % of
the old ATF can remain behind).
Easy connection and operation.
Adapters for all European cars.
Adapters for US cars are optional.

Recommended when changing ATF

of automatic gearboxes or when
experiencing shifting problems.

Directions
Operates on the vehicles battery
(12V).
See manual.

Cleaning and
changing without
dismantling

Automatic Transmission Treatment Ref. Nr. 64544 24x325 ml

Automatic Transmission Flush Ref. Nr. 64401 24x325 ml

Power Steering Service

Wynns Power Steering Serve is a tool which cleans the power steering system and which replaces the
fluid in the power steering system in a simple and quick way without dismantling. The product Wynns
Power Steering Flush contains detergents (to loosen the deposits) and dispersants (keeping them in
suspension, so that they can be removed).

Power Steering Serve

Ref. Nr. 68413

Properties

Applications

Removes dirt and impurities from

the entire power steering system and
changes oil without dismantling.
Changes up to 90% of the old power
steering oil (with the conventional
method up to 50 % can remain
behind).
Improves the performance and
smoothens the operation of the
power steering system.

Recommended when changing the

power steering fluid in the power
steering system.

Directions
Operates on the vehicles battery
(12 V).
See the manual delivered with
the tool.

Power Steering Flush:

Ref. Nr. 62411 6x1,9 litre

For further information:

See Safety and Technical Data Sheet.

13

Fuel Service

Service Machines

Modern high performance fuel systems are highly tuned and therefore more susceptible to the negative effects
of chemical reactions in the fuel. This can lead to fouling of the fuel system and other problems. Older vehicles
experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits
in the fuel system.
Wynns FuelServe is an apparatus for the effective cleaning of injection systems for petrol and diesel engines
without disassembly, using Injection System Purge (ISP) for petrol engines and Diesel System Purge (DSP) for
diesel engines. A service with Wynns FuelServe restores optimal engine performance and driving comfort
of your customers vehicle!

FuelServe
Ref. Nr. 68403

Properties

Applications

Cleans injection systems of petrol and

diesel engines without disassembly.
Easy to connect and easy handling.
Fluid delivery can be adjusted to the
degree of fouling and engine displacement.
Operates via the vehicles battery (12 V).
When the treatment is completed, the
apparatus automatically stops and an alarm
is activated.
Provided with complete set of adapters for
European market.

Can be connected to all petrol injection systems (K, KE, L, LE,

LH, Motronic, Monojetronic, Renix, direct injection, etc.) and
diesel engines (prechamber and direct injection, common
rail, injection-pump unit).
Suitable for passenger cars and trucks, marine and
stationary engines.
For exclusive use with Wynns Injection System Purge and
Wynns Diesel System Purge.

Directions
See the manual delivered with the machine.

ISP - Injection System Purge

Ref. Nr. 76695 - 12x1 litre

Properties

Applications

Cleans injectors, valves, valve stems,

combustion chamber and other vital
parts in fouled petrol injection systems of
carburettor or injection engines without
dismantling.
Frees sticking exhaust valves.
Reduces emissions of noxious exhaust
gases.
Restores good engine operation and
improves combustion.
Safe for spark plugs and catalytic
converters.

For all fuel systems of petrol engines with carburettor,

continuous, multipoint, mono-point, direct injection (GDI,
FSI, ).

Directions
Recommended treatment every 20.000 to 30.000 km or
when experiencing problems of poor running, rough idling
or excessive exhaust emissions.

DSP - Diesel System Purge

Ref. Nr. 89195 - 12x1 litre

14

Properties

Applications

Cleans injectors, pump and combustion

chamber.
Restores the injector spray pattern and
improves combustion.
Reduces emissions of noxious exhaust
gases and soot.
Safe for soot filters and catalytic converters.

Can be used on all diesel injection systems of cars,

trucks, marine and stationary engines, with or without
turbocharger.

Directions
Recommended treatment every 20.000 to 30.000 km (400
to 600 operating hours) or when experiencing problems
of fouled injectors, heavy black smoke, rough idling, bad
acceleration, etc.
To be used only with the Wynns RCP or FuelServe
equipment.
See Wynns Unit Operating Manual.

Service Machines

Portable FuelsystemServe
Ref. Nr. 68465

Properties

Applications

Cleans injection systems of petrol and

diesel engines without disassembly
and during engine running.
Easy to connect and easy handling.
Fluid delivery can be adjusted to
the degree of fouling and engine
displacement.
The machine is incorporated in a
complete plastic case and is portable.
Provided with complete set of
adapters for European market (US
adapters are optional).

Can be connected to all petrol injection

systems (carburettor, K-, KE-, L-, LE-,
LH-, Monojetronic, Motronic, Renix,
direct injection, etc.) and diesel engines
(prechamber and direct injection, common
rail, injection-pump unit).
Operates via the vehicles battery (12 V).

Directions
See the manual delivered with the machine.
Exclusive use with Injection System Purge
and Diesel System Purge.

Injection System Purge

Ref. Nr. 76695 - 12x1 litre
Diesel System Purge
Ref. Nr. 89195 - 12x1 litre

Cooling System Service

Cooling system problems, such as leaks and insufficient cooling due to fouling of the system, are the primary cause of
vehicle breakdown. Wynns CoolingServe provides a fast and efficient method of cleaning and refilling the complete
cooling system.

CoolingServe
Ref. Nr. 68401

Properties

Applications

Changes up to 90/ 95% of the old

cooling liquid (With the conventional
method this is only 60 to 80%.)
Works fast and easy.
Prevents fouling of new cooling
liquid by old contaminated liquid.
Prevents wear of the cooling system
parts (pump, engine block, radiator,
thermostat).
Operates independently via a 12-volt
power source (vehicles battery).
A set of adapters makes it possible
to connect to all types of cars, vans
and trucks.

All engines equipped with a water

cooled system.
For passenger cars, trucks, buses
and stationary equipment.
Recommended for changing the
cooling liquid at the period advised
by the car manufacturer.

Directions
See the manual delivered with the
machine.
Exclusive use with Cooling System
Stop Leak (W45644) and Cooling
System Flush (W45944).

Cooling System Stop Leak

Ref. Nr. 45644 - 24x325 ml
Cooling System Flush
Ref. Nr. 45944 - 24x325 ml

For further information:

See Safety and Technical Data Sheet.

15

Wynns keeps you moving

Wynns stands for quality
The Wynns factories operate according to the ISO 9001
certified quality system, the production facilities and
products have to meet stringent requirements resulting
in a high quality product range of more than 400
products. Several products are worldwide approved by
car manufacturers.

The Wynns professional range includes:

fuel treatments
oil and transmission treatments
cooling system treatments
workshop and service products
air treatment equipment and products
service equipment

75 years of experience
in the automotive aftermarket!

Wynns Europe c/o Wynns Belgium

Industriepark West 46
B-9100 Sint-Niklaas / Belgium
Tel: 32-3-766.60.20
Fax: 32-3-778.16.56
www.wynns.eu
[email protected]

09/2013 WM9500 2013 Illinois Tool Works Inc.