Relations Between Distributed Load Shear Force and Bending Moment

Converted from "Finding the Shear Force and Bending Moment Along a Beam" created by Mathcad Staff
WORKSHEET 9: EXAMPLE 7.5
Relations Between Distributed Load, Shear

Force, and Bending Moment
This example shows how the shear force and the bending moment along a simply supported
beam can be determined as a function of the distance from one end. The method used is based
on the differential equations that relate the shear force, the bending moment, and the distributed
load. This example and its set of equations can be used to solve many problems in Section 7.3.
These include Problems 7-3.3. 7-3.6, 7-3.7, 7-3.10,7-3.13, and 7-3.15.
Statement
Use Eqs. (7.4) and (7.5) to determine the shear force and bending moment diagrams for the
beam in the figure below.
d
V w
dx
Eq. (7.4)
d
MV
dx
Eq. (7.5)
Parameters
kN
fB 300
m
end limit of linearly varying distributed load at B
kN
fC 100
m
end limit of linearly varying distributed load at C
Dy 300 kN
vertical load at D
LAB 6 m
distance between A and B
LBC 6 m
distance between B and C
LCD 6 m
distance between C and D
Solution
Equivalent Concentrated Load Representation of Distributed Load
We begin by determining the expression of the distributed load w(x) as a function of position x.
Since w(x) is a linear function, we can express it in the form w(x) = cx + d, where c and d are
constants. We know w at x = LAB and x = LAB + LBC:
fB c LAB + d
and
fC c LAB + LBC + d
These can be solved simultaneously to give

fC fB
c
LBC
kN
c = 33.333
2
m
d fB c LAB
kN
d = 500
m
Thus, the linearly varying distributed load can be written as

w (x) c x + d
We check here that indeed the function gives the right values at the known limits:
kN
w LAB = 300
m
kN
w LAB + LBC = 100
m
To go further, this distributed load can be represented by one resultant force Fd acting at a
specific location x = xd, where
LAB + LBC
Fd
w (x) d x
3
Fd = 1.2 10 kN
LAB
LAB + LBC
x w (x) d x
AB
xd
Fd
xd = 8.5 m
The free-body diagram of

the entire beam with the
distributed load replaced
by the resultant force Fd is
shown on the right.
We now obtain the reactions Ax, Ay, and Cy from the equilibrium equations.
Since Fx = 0,
Ax 0
Since M(point A)
=0
LAB + LBC Cy xd Fd LAB + LBC + LCD Dy 0
xd Fd + Dy LAB + Dy LBC + Dy LCD

Cy
LAB + LBC
3
Cy = 1.3 10 kN
Since Fy = 0
A y + C y Fd D y 0
Ay Fd + Dy Cy
Ay = 200 kN
We now proceed to determine the shear force and bending moment as functions of x for the
entire beam, using Eqs. (7.4) and (7.5).
Shear Force Diagram

From A to B There is no load between A and B, so the shear force increases by Ay at A and
then remains constant from A to B:
VAB (x) Ay
From B to C From our solution between A and B, VAB(LAB)= 200 kN . Integrating Eq. (7.4)
from x = LAB to an arbitrary value of x between B and C:
VBC (x))
1 d V w d x (c x + d) d x
VAB LAB
LAB
LAB
we obtain an equation for V between B and C:

c x 2 L 2
AB
VBC (x) VAB LAB
+ d x LAB
2
From C to D At C, V undergoes an increase of CY= 1300 kN due to the force exerted by the
pin support. Adding this change to the value of V at C obtained from our solution from B to C,
the value of V just to the right of C is
VBC LAB + LBC + Cy = 300 kN
There is no loading between C and D, so V remains constant from C to D:

VCD (x) VBC LAB + LBC + Cy
We combine the results for all three sections using Mathcad's if function:
V (x) if x < LAB , VAB (x) , if x < LAB + LBC , VBC (x) , VCD (x)
The shear force diagram is shown below, after defining a range variable for the distance from
the left end:
i
x
LCD + LAB + LBC
i
300
i 0 300
18
450
300
150
-150
-300
-450
-600
-750
-900
-1.0510
10
12
14
16
18
LAB+ LBC+ LCD
Bending Moment Diagram

From A to B Integrating Eq. (7.5) from x = 0 to an arbitrary value of x between A and B:
MAB (x))
1 d M V (x) d x A d x
AB
y
0
we obtain:
3
MAB LAB = 1.2 10 kNm
MAB (x) Ay x
From B to C Integrating Eq. (7.5) from x = LAB to an arbitrary value of x between B and C:
MBC (x))
1 d M V (x) d x
BC
MAB LAB
LAB
c 2
c
x d x + LAB + d LAB + VAB LAB d x

2
2
LAB
we obtain an equation for V between B and C:
c
3
2
2
2
c 3
d
MBC (x) MAB LAB +
x LAB x LAB + LAB + d LAB + VAB LAB x LAB
6
2
2
Note that at x, x:=Lab,
3
MBC LAB = 1.2 10 kNm
MBC LAB + LBC = 1.8 10 kNm
From C to D Integrating Eq. (7.5) from x = LAB + LBC to an arbitrary value of x between C
and D:
MCD (x))
1 dM
MBC LAB + LBC
V (x) d x
CD
LAB + LBC
V L + L + C d x
BC
y
BC AB
LAB + LBC
we obtain:
MCD (x) MBC LAB + LBC + VBC LAB + LBC + Cy x LAB LBC
We combine the results for all three sections:

M (x) if x < LAB , MAB (x) , if x < LAB + LBC , MBC (x) , MCD (x)
The bending moment diagram is shown below:
1.510
1.210
900
600
300
-300
-600
-900
-1.210
-1.510
-1.810
0
10
12
14
16
18
Discussion
Compare this example with Example 7.3, in which we use free-body diagrams to determine the
shear force and bending moment as functions of x for this beam and loading.

Relations Between Distributed Load Shear Force and Bending Moment

Uploaded by

Copyright:

Available Formats

Relations Between Distributed Load Shear Force and Bending Moment

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Relations Between Distributed Load Shear Force and Bending Moment

Uploaded by

Copyright:

Available Formats

Converted from "Finding the Shear Force and Bending Moment Along a Beam" created by Mathcad Staff

WORKSHEET 9: EXAMPLE 7.5

Relations Between Distributed Load, Shear

end limit of linearly varying distributed load at B

end limit of linearly varying distributed load at C

distance between A and B

distance between B and C

distance between C and D

These can be solved simultaneously to give

Thus, the linearly varying distributed load can be written as

The free-body diagram of

LAB + LBC Cy xd Fd LAB + LBC + LCD Dy 0

xd Fd + Dy LAB + Dy LBC + Dy LCD

Shear Force Diagram

we obtain an equation for V between B and C:

There is no loading between C and D, so V remains constant from C to D:

LAB+ LBC+ LCD

Bending Moment Diagram

we obtain an equation for V between B and C:

Note that at x, x:=Lab,

MBC LAB + LBC = 1.8 10 kNm

MBC LAB + LBC

We combine the results for all three sections:

The bending moment diagram is shown below:

You might also like