2nd Successful Run in Asia!

FUNDAMENTALS OF SUPERCRITICAL & ULTRASUPER CRITICAL COAL-FIRED POWER PLANTS

COAL
2 3 DECEMBER
FIRED2015,
PLANT
KUALAOPERATIONS
LUMPUR
Topics Covered
Setting the scene international
developments
Pulverised Fuel (PF) technologies and
power plant designs
Fuel quality issues
Review of Supercritical (SC) and UltraSupercritical (USC) technologies
Other technical features in
supercritical power plants
Case Studies of supercritical and ultrasupercritical plants
Overview of international RD&D
Programmes into the development of
Advanced-USC Technologies
Scheduled for commercialisation
before 2030

Expert Course Faculty Leader

Dr Andrew W. Cox,
Manager, Energy Intelligence
& Marketing Research

Fluidised Bed Combustion Systems

Supported By

Another Quality Training By

FUNDAMENTALS OF SUPERCRITICAL & ULTRA-SUPER CRITICAL COAL-FIRED POWER PLANT

2 3 DECEMBER 2015| KUALA LUMPUR

About This Training Course

Supercritical and ultra-supercritical coal-fired combustion systems operate at higher temperatures and pressures
and can achieve enhanced thermal efficiencies [in excess of 45% HHV] compared to conventional sub-critical
pulverised coal combustion units.
The supercritical plants can also achieve significant reductions per KWh in CO2 emissions.

Learning Outcomes

Supercritical steam cycle technology has been utilised commercially since the 1980s and is becoming the system
of
choice for
plants in many countries particularly the new generation of coal-fired generation
Delegates
will new
learncoal-fired
about:
unitsbeing
constructed
the machine
Asia-Pacific Region.
Fundamentals
of throughout
the synchronous
The generator capability diagram
Excitation system
components
Ultra-supercritical
units are
now commercially available and can achieve higher thermal efficiencies. During the
Excitation
system control theory
nextdecade
new ultra-supercritical
coal-fired plant will achieve thermal efficiencies of up to 50% HHV.
Parallel operation of generators
Brushless
/ Rotating
excitation
systems
Operating
at higher
temperatures
and
pressures is achieved by the redesign of power plants including the

Static
excitation
systems
boiler and heat recovery systems. New plants utilise advanced steel alloys which minimise corrosion and allow
load
Power
System
Stabilisersplant operators have to be fully aware of the challenges of using coal as a fuel.
higher
factors.
However,
Transmission company compliance
IEEE Excitation Standards

Other coal combustion technologies [including circulating fluidised bed combustion systems] are also adopting
supercritical technologies which will allow further improvements in plant thermal efficiencies.

Who Should Attend

This training course will provide a detailed understanding of the concepts of supercritical combustion
technologies.

Course Learning Outcome

This two-day training course will be valuable to anyone seeking to obtain an understanding of the fundamental
technical, economic and environmental issues affecting the development of the new generation of coal-fired
plant which utilise higher efficiency supercritical technologies.

Who Should Attend

The following professionals from utilities companies, coal producers, coal technology companies,
consultancies, Government and regulatory bodies, plus financial institutions will find this training
course of value:
Coal sector consultants and market representatives
Power Engineering Professionals
Your Expert Course Faculty
Energy R&D Executives
Process Engineers
Plant Developers and Project Managers
Environmental Managers
EPCIC Executives
Governmental Regulators
New investment or capital funding executives

www.poweredgeasia.com

FUNDAMENTALS OF SUPERCRITICAL & ULTRA-SUPER CRITICAL COAL-FIRED POWER PLANT

2 3 DECEMBER 2015| KUALA LUMPUR

2 Day Course Outline

Introduction
Course outline
Essential further reading and sources of information
Setting the scene international developments
The general drivers of clean coal technologies
Why develop Supercritical [SC] and Ultra-Supercritical
[USC] plant?
Pulverised Fuel (PF) technologies and power plant designs
Introduction
Boiler systems - two-pass or tower/single-pass designs
or hybrid designs.
Boiler design features
Burner designs and configurations
Turbine design issues
What are the advantages, strengths and weaknesses
of SC systems v. sub-critical pf systems and other
power generation technologies
Fuel quality issues
Impacts of coal specifications/qualities on plant
operations and overall efficiency
Developing a holistic approach to using coal as a fuel
Ash fouling, deposition and slagging - how these
problems can be minimised by plant operators
Power Station Computer Models and Operating
Systems - Plant monitoring and software systems
Review of Supercritical (SC) and Ultra-Supercritical (USC)
technologies
Supercriticality and SC plant classification
Benson once-through systems and other technologies
Supercritical steam conditions
Sliding Steam Pressure
Evolution of Supercritical power plant technologies

Other technical features in supercritical power plants

Water chemistry inside boiler tubes comparison of allvolatile treatment with oxygenated water treatment
processes
Alloys in Supercritical PF Coal-fired Plants
International Boiler Codes
Steam turbine material selection Issues
Case Studies of supercritical and ultra-supercritical plants
Several plants will be reviewed which are either operational
or currently under construction
Relevant Information on the manufacturers of supercritical
and ultra-supercritical plant and equipment is included in this
section
Overview of international RD&D Programmes into the development
of Advanced-USC Technologies
Scheduled for commercialisation before 2030 - these
advanced power plants will operate above 700oC and
34.5MPa. They require the development of advanced alloys
and other technologies
Fluidised Bed Combustion Systems
Key features of circulating fluidised bed combustion [CFBC]
systems and other power technologies will be outlined.
Manufacturers are now marketing a range of power plant
designs which operate at SC and USC temperatures and
pressures
Case studies of new supercritical CFBC plant being
constructed throughout the world
Cogeneration
Development of supercritical cogeneration schemes
Glossary of key technical terms
Course Conclusions

www.poweredgeasia.com

FUNDAMENTALS OF SUPERCRITICAL & ULTRA-SUPER CRITICAL COAL-FIRED POWER PLANT

2 3 DECEMBER 2015| KUALA LUMPUR

Your Expert Course Trainer: Dr. Andrew Cox

Since 1995, Dr Cox has been actively involved in market assessment studies, surveys, project appraisals and evaluations concerning coal (including presenting evidence at 30 opencast coal public inquiries), second generation biofuels, minerals,
electricity, gas and other topics. Dr Cox has also carried out work in the environmental sector (waste/recycling, climate change
and public consultation studies) and other business development projects.
This includes
Hon. Secretary [1986-92 and 2001-2004] and Chair [2005] of the North East Branch of the Energy Institute
Newcastle Environment Forum [1999 and 2005]
Public consultation events and exhibitions including 2006 - 2008 World Environment Day in Newcastle
Seminars and events for Carbon Neutral Newcastle and Carbon Neutral North East
Dr Cox was also a member of the Energy Institutes Publications and Conferences Committee producing several UK-based
conferences and exhibitions. Conference topics included: UK energy policy, clean coal technology, the UK coal sector, coal bed
methane, and UK energy statistics.
With decades of industry experience under his belt, Dr Cox has delivered a range of conference papers and chaired several
seminars and conferences on energy and environmental topics in the UK and overseas. Dr Cox has been senior tender
proposal writer [2009 to PRESENT] with Tenders-UK [http://www.tenders-uk.org] assisting organisations in the preparation of
tenders and funding applications.
His expertise coupled with valuable industry insights from past projects and other consultancy work are utilised in professional
development courses.
Dr Cox has also helped produce and publicise a range of conferences and seminars for other organisations including recent
Yorkshire Coal Task Force events, a three-day conference at the University of Newcastle [The First International Process
Intensification and Miniaturisation Symposium August 2003], plus two Workshop Sessions at the Electric Power Conferences
in Chicago [2008 and 2010]. Dr Cox is currently a member of the organising committee for the forthcoming European Gas
Markets Forum 2013 [to be held in Vienna, March 2013].
In addition, Dr Cox was editor of the monthly newsletter UK Coal Review from 1991 to 1999. The newsletter examined all
aspects of the UK coal sector including: coal production in underground and surface mines; UK power station sector; coal
imports and transportation; corporate and related policy developments.
In 2000 Dr Cox co-authored a book Digging Up Trouble [with Huw Beynon and Ray Hudson, published by Rivers Oram Press]
which examined the environmental, social, economic and political issues surrounding the UK opencast coal sector. Dr Cox is also
a Freelance Writer - contributing articles and papers on a wide range of energy, minerals and environmental issues to UK and
international publications.
Recent articles, papers and reports have covered a wide range of topics - including:
FutureGen (US) and GreenGen (China) clean coal projects; Drax power station; other clean coal technologies; the India coal
sector
Coal liquefaction project developments
Second Generation Biodiesel/Bioethanol fuels; Green Chemistry and Clean Technologies; European Chemicals Agency;
Related Conference Summaries and Blogs
UK energy policy
Climate Change Policies; Sustainability and Carbon Neutral Cities
Offshore renewable energy
Energy efficiency developments including equipment and technology developments low energy housing, energy
efficiency in Data Centres and UK Prisons].

www.poweredgeasia.com

FUNDAMENTALS OF SUPERCRITICAL & ULTRA-SUPER CRITICAL COAL-FIRED POWER PLANT

2 3 DECEMBER 2015| KUALA LUMPUR

Courses Available

4 Pillars of Transformer Condition

Advanced Project Finance for Power
Advanced Technical Report Writing & Presentation Skills
Advanced Turnaround Shutdown & Outage Management
Ancillary Services in Competitive Electricity
Asset Management for the Power Industry
Best Practice Renewable Energy Capital & Project Management
Biomass Power Generation
CFB Combustion for Boiler Operations
Clean Development Mechanism and Carbon Markets
Coal Contracts
Combined Cycle Power Plants Operation
Combined Heat & Power (CHP) and Co-Generation Plant Operations
Competency Management System for the Power Industry
Design & Operations of Circulating Fluidized Bed Boiler
Developing & Structuring Public-Private Partnership (PPP) for Infrastructure
Effective Tender Process Management for Power & Utilities
Electrical Hazop (eHazop) Studies for the Power Industry
Electricity Demand-Side Management
Electricity Industry Design
Electricity Network Planning
Electricity Retail Contracts
Electricity Theft
Electricity Trading Essentials
Energy Efficiency
EPC Contract Management for Power & Utilities
Essentials of Coal Markets and Trading
Essentials of Power Trading
Excitation Systems
Feed-In Tariffs for PV Systems
Finance for Non-Finance Professionals in Power & Utilities
Financial Modelling for Project Finance in Power & Utilities
Fitness-For-Service AP1 579 & High Energy Piping Life Management
Fundamentals of Geothermal Energy
Fundamentals of Power Generation
Gas & LNG Contract Negotiation
Gas Turbine Generator Selection, Operation & Maintenance
Gas Turbine Hot Gas Paths, Rotors & Failure Analysis
Gas Turbine Major Inspection & Overhaul
GE Gas Turbine Operations Simulation Based
HRSG Design, Operations & Understanding, Controlling of HRSG Damage
Mechanisms
HV Substation Design & Construction
IEC for Utilities
Integration of Distributed Generation
Introduction to Carbon Capture & Storage
Introduction to Clean Coal Technology
Introduction to Power Systems
Keeping Electrical Switchgear Safe
Leadership & Team Dynamics for Power & Utilities
LNG Fundamentals
LNG Markets & SPOT Trading
Maintenance Planning & Scheduling

Making IPP & Renewable Energy Projects Contract

Frameworks Bankable
Managing Complex Projects for Power and Utilities
Professionals
Medium Voltage & High Voltage Switchgear
Metallurgy for Engineers
Mechanical Engineering for Non-Mechanical Engineers
Mini Hydro Project Analysis
MKV Speedtronic Control System
MK VI Speedtronic Control System
Nuclear Energy Project Planning & Economics
Nuclear Power
Offshore Platforms Electrical Systems Design &
Illustrations
Operations of Coal Fired Power Plants
Power Generation Commissioning, Operations &
Maintenance
Power Generation Operation, Protection & Excitation
Control
Power Plant Chemistry for Chemist & Chemical Engineers
Power Purchase Agreements
Process Control Methods
Programmatic CDM
Relay Protection in Power Systems
Reliability Centered Maintenance Masterclass
Reliability Engineering
Renewable Energy Development & Investment
Renewable Energy Integration
Risk Based Inspection
Risk Management in Power Markets
Root Cause Analysis
Rotating Equipment Maintenance & Reliability
Excellence
SCADA & Power Systems
Smart Grid
Solar Energy & Photovoltaic Power
Spare Parts Optimisation
Supercritical and Ultra-Supercritical Coal-Fired Power
Plant
Technical Report Writing & Presentation Skills for Power
& Utilities Professionals
Ultra Low NOx Gas Turbine Combustion
Uninterruptible Power Supply
Vibration Analysis & Condition Monitoring
Waste to Energy Plant Operations
Water Treatment and Corrosion Control for Steam
Generation and Power Production
Writing Effective Standard Operating Procedures (SOP)
for Power & Utilities Professionals & Engineers

www.poweredgeasia.com

FUNDAMENTALS OF SUPERCRITICAL & ULTRA-SUPER CRITICAL COAL-FIRED POWER PLANT

2 3 DECEMBER 2015| KUALA LUMPUR

Frequently Asked Questions (FAQs)

1.
Does PowerEdge have other programmes than
those listed?
We have more than 200 programmes that we are
capable of running. All we need is for you to contact us
and request for the preferred programme and we will
able to develop it.
2.
Where is PowerEdge based?
PowerEDGE is headquartered in Singapore but we run
our training programmes in different venues around
Asia.
3.
What does PowerEdge do?
We are a Power & Utilities Training Specialist.
4.
Can this course be done in our city?
It absolutely can. Get in touch with us to request for a
training programme to be carried out in your city.
5.
Can you reduce the price of our preferred course?
While our price has been reduced before it is even
launched, we are always happy to help you with further
discounts.
6.
Can you change the dates of the course?
If you have a special requested date, let us know and we
will arrange another session for you.
7.
Who are the companies that will be participating?
This varies from a diversity of Power Operators,
Regulators, Financiers, to Vendors in the Power &
Utilities industry.
8.
Where is the venue for the course?
We usually engage a 4 to 5 star hotel meeting room to
ensure the comfort of our participants.
9.
How many delegates should we expect for each
course?
This varies from 15 to 20 participants. Class sizes are kept
small to allow trainers to focus better on each
participant.
10. What are the different payment modes?
We accept Visa/MasterCard, cheques, bank transfers and
cash on site.

11. Is accommodation included when I sign up for a

course?
Accommodation is not included in the course fee
but we are always happy to advise on available
accommodations.
12. Can I get a cheaper accommodation through
PowerEdge?
We will be pleased to help you negotiate a better
rate with hotels.
13. Is lunch provided during the course?
We provide lunch and 2 tea breaks every day during
our training programmes.
14. Are the training materials included once I have
signed up for a course?
Yes, training and course materials are included in
the course fee.
15. Will there be a certificate for the course?
Yes, there will be a certificate of participation upon
completion of a course.
16. Who are PowerEdge trainers?
They are expert consultants and practitioners with
many years of experience in the subject matter that
they deliver on.
17. Are PowerEdge trainers competent?
We have received numerous favourable feedbacks
on our trainers from past participants.
18. Can PowerEdge assist with Visa travel
applications?
We can assist in advising you on the relevant
procedure(s) and embassies/consulates that
provide Visa for travel purposes.
19. Can we purchase training materials without
attending a course?
Unfortunately this option is not available as training
materials are specially developed for courses.
20. Can course content be tweaked to cater to our
needs?
Of course! Just let us know your request and we will
get the trainer to assist in carrying it out.

www.poweredgeasia.com

FUNDAMENTALS OF SUPERCRITICAL & ULTRA-SUPER CRITICAL COAL-FIRED POWER PLANT

2 3 DECEMBER 2015| KUALA LUMPUR

REGISTRATION FORM

4 ways to Register
NORMAL PRICE

2 Day
Programme

SGD 3,100
Per Participant

Early Bird
Ends 31 Oct 2015

SGD 2,900
Per Participant

GROUP OF 3 or More

SGD 2,600
Per Participant

Online Web Registration

[email protected]
(65) 6741 9927
(65) 67478737

RELATED COURSES
ATTENDEE DETAILS
Name .................................................................................................. Job title ................................................................................................
Tel ......................................... Department .............................................................. Email ..............................................................................

Name .................................................................................................. Job title ................................................................................................

Tel ......................................... Department .............................................................. Email ..............................................................................

Name .................................................................................................. Job title ................................................................................................

Coal Fired Plant

Operations
Introduction to Power
Systems
Renewable Energy
Integration
Fundamentals of Power
Generation

Tel ......................................... Department .............................................................. Email ..............................................................................

Name .................................................................................................. Job title ................................................................................................

Tel ......................................... Department .............................................................. Email ..............................................................................

Name .................................................................................................. Job title ................................................................................................

Tel ......................................... Department .............................................................. Email ..............................................................................

On Site Training
Cant make it for the Course?
Well make the course come
to you!!
Simply let us know your
preferred time and dates and
we will meet you at your
schedule and venue.

COMPANY DETAILS

Address ...............................................................................................................................................................................................................

With a host of highly trained

experts, we will be happy to
customize your programme
with your needs 100% fulfilled.

Postcode............................................................................................... Country...............................................................................................

Contact us today at

Organisation name ...............................................................................Industry................................................................................................

Tel ..........................................................................................................Fax.......................................................................................................
PAYMENT METHODS
By Cheque/ Bank Draft: Make Payable to PowerEdge Pte Ltd.
By Telegraphic Transfer: Please quote AE1 with the remittance advise
Account Name: PowerEdge Pte. Ltd.
ank Code: 7339 Branch code: 686 Account Number: 686-253386-001 Swift Code: OCBCSGSG
Bank Address: 65 Chulia Street OCBC Centre, Singapore 049513
All bank charges and payment in Singapore dollars (SGD) to be borne by payer. Please ensure that PowerEdge Pte Ltd receive the full invoiced amount.

[email protected]
(65) 6741 9927

PAYMENT POLICY
Payment is due in full at the time of registration. Full payment is mandatory for event attendance. I agree to PowerEdge Pte Ltd. payment terms
CANCELLATIONS & SUBSTITUTIONS
You may substitute delegates at any time. POWEREDGE PTE LTD does not provide refunds for cancellations. For cancellations received in writing more than seven (7) days prior to the training course you will receive a 100% credit to be
used at another POWEREDGE PTE LTD training course for up to one year from the date of issuance. For cancellations received seven (7) days or less prior to an event (including day 7), no credits will be issued. In the event that
POWEREDGE PTE LTD cancels an event, delegate payments at the date of cancellation will be credited to a future POWEREDGE PTE LTD event. This credit will be available for up to one year from the date of issuance. In the event that
POWEREDGE PTE LTD postpones an event, delegate payments at the postponement date will be credited towards the rescheduled date. If the delegate is unable to attend the rescheduled event, the delegate will receive a 100% credit

www.poweredgeasia.com