Cryogenic Technology in Rocket Engines: A.M. Ashwini, M. Prabhakaran

Cryogenic technology in rocket engines
A.m. Ashwini, M. Prabhakaran

B.E. Final year, Dept of Aeronautical Engineering,
Dr. Pauls Engineering College
[email protected], [email protected]
Abstract - This paper is all about the rocket engine
involving the use of cryogenic technology at a cryogenic
temperature (123 K). This basically uses the liquid oxygen
and liquid hydrogen as an oxidizer and fuel, which are
very clean and non-pollutant fuels compared to other
hydrocarbon fuels like Petrol, Diesel, Gasoline, LPG,
CNG, etc., sometimes, liquid nitrogen is also used as an
fuel. The efficiency of the rocket engine is more than the
jet engine. As per the Newtons third law of mechanics,
the thrust produced in rocket engine is outwards whereas
that produced in jet engine is inwards.
1.
INTRODUCTION:
Mechanical engineering is totally based upon the laws of

physics, Engineering Mechanics, and Mathematics.
Cryogenics is the study of production of very low
temperature nearly about 123K in which the materials
behavior and properties are studied at that temperature.
Cryogenic rocket engine is a type of rocket engine designed
to use the fuel or oxidizer which must be refrigerated to
remain in liquid state.
2.
2.1.
HISTORY OF CRYOGENIC
Rocket Engine:
In 1963, United States of America was the first country to

develop the CRE with the use of RL 10 engines with the
successful flight and it is still used on Atlas-V rocket. Other
countries are like: Japanused LE5 in 1997, France used HM7
in 1979 used the respective rocket engines. Here the mixture
of liquid N2, H2 and O2 are used as fuels. In 1987, first CRE
was launched with human in space.
2.2 Terminologies Used:

1. Cryogenics: The branch of Physics and Engineering that
involves the study of very low temperatures, how to produce
them, and how materials behave at those temperatures.
2.Cryobiology: The branch of Biology involving the study of
the effects of low temperatures on organisms (most often for
the purpose of achieving Cryopreservation
3. CRYOGENIC TECHNOLOGY:
A Cryogenic technology is a process of involvement of
including of usage of rocket propellants at Cryogenic
temperature. It can be combination of liquid fuels such as:Liquid Oxygen (LOX), and liquid Hydrogen (LH2) as an
oxidizer and fuel in the different mixtures of proportions.
Themixture of fuels offers the highest energy efficiency for
the rocket engines that produces very high amount of thrust.
Here, the Oxygen remains liquid only at the temperature
below (-183C) and Hydrogen at below (-253C) . This is a
type of rocket engine that is functionally designed to use the
oxidizer which must be refrigerated in the liquid state.
Sometimes, the liquid Nitrogen(LN2) is sometimes used as
fuel because the exhaust is also Nitrogen. Liquid Oxygen is
injected below critical temperature but above critical
pressure. In our atmosphere Nitrogen is nearly about 78%.
Nitrogen is anon pollutant gas and during exhaust no other
harmful gases are produced. Hence its efficiency is very high
than any other Jet engines.
4. TYPES OF CRYOGENIC TREATMENT:
1. Shallow Cryogenics, made the the objects to temperature
of approximately 1200F.
2. Flooding, takes the component to 1200F, then the
chamber is flooded with liquid Nitrogen.
3. Deep Cryogenics Treatment, subjects to the temperature of
approximately -3000F.
4.1 Why High Efficiency?
Fig. 1 Cryogenic Rocket engine
According to Newtonian third law of mechanics: Action and

Reaction are equal and opposite in direction. Rocket
engineoperates through force of its exhaust pushing it
backwards. Thrust is in opposite direction and more efficient
in lower atmosphere or vacuum (sometimes). It makes the
use of liquid oxygen as an oxidizer and liquidhydrogen as

fuel. Pure liquid oxygen as oxidizer operates significantly at
hotter combustion chambers due to which extremely high
heat fluxes are produced which is not available in any jet
engines. In jet engines petrol, diesel, kerosene, gasoline,
LPG, CNG and PNG, etc., are used having the properties of
hydrocarbons.
6. JOULE-THOMSON EFFECT:
The Joule-Thomson effect is an important part of our lives
today, even though we may not aware of it. Ordinary house
hold refrigeration and air conditioners operates onthis
principle. First a gas is pressurized and cooled to an
intermediate temperature by contact with a colder gas or
liquid. Then the gas is expanded, and its temperature drops
still further. The heat needed to keep this cycle operating
comes from the inside of refrigerator or the interior or a room
the interior of a room, producing the desired cooling effect.=
7. CONSTRUCTION AND WORKING:
Figure shows an RL-10 CRE which involve the complicated
staged combustion cycle for Increasing engine efficiency the
importantparts are listed below: turbine, pumps, gas
generator, Propellant injection system, thrustchambers
(combustion chamber + short part of divergent section of
nozzle).
Fig. 2 Propulsion efficiency of Rocket engine and jet engine
Fig. 4 Construction of Rocket engine
The description of each part with function is explained

below:
Fig. 3 RL 10 Engine
5. EVAPORATIVE COOLING:
Humans are familiar with this process because it is a
mechanism inwhich our bodies lose heat. Atom and
molecules in the gaseous state are moving faster than the
atoms and molecules in the liquid state. When we add heat
energy to the particles in a liquid, it will become gaseous.
7.1. Gas Generator: The main function of gas generator is

delivery of sufficient amount of driver gas at designed
temperature a pressure which generates continuous propellant
supply of thrust chamber.
7.2 Turbo Pumps: They receive liquid propellants at low
pressure from vehicle tanks which are then supplied to the
combustion chamber. Generally, radial and axial turbines are
used.
7.3 Pump: In simple words, pump adds energy
to propellants through the rotation. The material used for all
the turbo machinery chambers are: Al alloys, H.S.S, S.S, and
Ni-
7.4 Ti-Co Based Alloys.

THRUST CHAMBER: Thrust is generated inthrust chamber
by the efficiency conversion of Chemical energy in to gases
kinetic energy. This can beobtain by combustion of liquid
propellants. In the combustion chamber followed by the
acceleration of hot gases throw conversion/diversion section
of nozzle to acquire high gas velocities and hands thrust.
Fig. 6 Constructional view of Cryogenic Rocket engine
8.1 Why Didnt Cryogenic Engine Of India Ignite?

GSLV-D3 Rocket engine of India lifted off from Sriharikota
on April 15, 2010, Thursday later plunged into Bay of Bengal
and failed in ignite. As per the plan, vehicle lifted off at 4:27
pm and its performance as normal up to end of its second
stage till 298 seconds from lift off. As ISRO official said: It
is very that very clear cryogenic engine didnt ignite when
you look at curve of vehicles trajectory. Vehicle develop
problems when cryogenic upper stage wouldhave ignited 304
seconds after the lift off and it fail into Bay of Bengal.
8.2 Pros:
1. High energy per unit mass
Fig. 5 Complicated Staged Combustion Engine for Increasing Efficiency
2. Clean fuels
7.5 Nozzle: The pressure generated incombustion chamber

can be used increased thrust by acceleration of combustion
gas to high supersonic velocity. Nozzle generally passes
parabolic enters. (Because when high
3. Economical
velocities gases entrance and at exit of nozzle, pressure of

exhaust gas increases with high value and hence velocity and
hence velocities reduces). The thrust equation of 1D-flows of
ideal gas at constant pressure is:
2. Highly reactive gases
F = mue+ (Pe P ) Ae
8. MANUFACTURING PROCESS:
The Indian CRE is produced by Godrej and
Hyderabad based MTAR technology.
CONS:
1. Boil off rate
3. Leakage
4. Hydrogen embrittlement
8.3 Next Generation Of Rocket Engine:
Generally any rocket engine burns theirrespective fuels to
generate the thrust. If any other engine has capacity to
generate thrust efficiently then it can be called rocket engine.
Currently NASA scientists are working on Xenon Ion
Engine which accelerates the ionsor atomic particles to
extremely high to create thrust more effectively and
efficiently by usage of electrostatic or electromagnetic force

by the principle of Lorentz force or Columbian force.
9. CONCLUSION:
We can conclude that as per the Newtonsthird law of
mechanics: Action and Reaction are equal and opposite in
direction and magnitude. The thrust produced in rocket
engine is outwards and that in the jet engine is inwards.
Hence, the efficiency of the cryogenic rocket engine is
greater than the jet engine and it is very much economical by
the use of liquid hydrogen and oxygen as a fuel and oxygen.
10. REFERENCES:
[1]Hawkins electrical guide, pg no.359 362
[2]Khurmi.r.s, guptha.j.k., a textbook of machine design s.chand and co,
new delhi
[3]Metal finishing by feldstein.n,vol.81 (8),(1983),35-41
[4]Engineering materials and metallurgy by v.jaya kumar , a.r.s. Publications
Fig. 7 Experimentation of Cryogenic Rocket engine
Fig. 8 Combustion of Cryogenic Rocket engine

Cryogenic Technology in Rocket Engines: A.M. Ashwini, M. Prabhakaran

Uploaded by

Copyright:

Available Formats

Cryogenic Technology in Rocket Engines: A.M. Ashwini, M. Prabhakaran

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cryogenic Technology in Rocket Engines: A.M. Ashwini, M. Prabhakaran

Uploaded by

Copyright:

Available Formats

Cryogenic technology in rocket engines

A.m. Ashwini, M. Prabhakaran

Mechanical engineering is totally based upon the laws of

In 1963, United States of America was the first country to

2.2 Terminologies Used:

Fig. 1 Cryogenic Rocket engine

According to Newtonian third law of mechanics: Action and

use of liquid oxygen as an oxidizer and liquidhydrogen as

Fig. 2 Propulsion efficiency of Rocket engine and jet engine

Fig. 4 Construction of Rocket engine

The description of each part with function is explained

7.1. Gas Generator: The main function of gas generator is

7.4 Ti-Co Based Alloys.

Fig. 6 Constructional view of Cryogenic Rocket engine

8.1 Why Didnt Cryogenic Engine Of India Ignite?

7.5 Nozzle: The pressure generated incombustion chamber

velocities gases entrance and at exit of nozzle, pressure of

2. Highly reactive gases

efficiently by usage of electrostatic or electromagnetic force

Fig. 7 Experimentation of Cryogenic Rocket engine

Fig. 8 Combustion of Cryogenic Rocket engine

You might also like