Frequently Asked Questions Regarding Engineering Certification/Licensure Requirements

CALIFORNIA DEPARTMENT OF CONSUMER AFFAIRS
Board for Professional Engineers, Land

Surveyors, and Geologists
FREQUENTLY ASKED
QUESTIONS REGARDING
ENGINEERING
CERTIFICATION/LICENSURE
REQUIREMENTS
FREQUENTLYASKEDQUESTIONS
1
What are the requirements for obtaining Engineer In
Training (EIT) certification?
Steps to EIT certification:
Qualify for certification - Comply with the following:
Not have committed any acts or crimes, which would be grounds for denial of certification. (See FAQ 18).
Complete three years or more of postsecondary engineering education, three years or more of
engineering experience (e.g., work of any nature with an engineering exposure, such as with a consulting
engineering firm, a construction contractor, CALTRANS, the engineering division of a public utility, etc.),
or a combination of postsecondary engineering education and experience in engineering totaling three
years. University students in the 3rd quarter or the 2nd semester of their junior year qualify for
certification.
2) Take and pass the Fundamentals of Engineering (FE) exam
a. Qualified applicants are required to register and pay for the FE examination with the National
Council of Examiners for Engineering and Surveying (NCEES). NCEES administers the FE exam
and all exam related communications such as results and admission notices will come from them.
If you have any exam related questions you may contact the NCEES through their website at
http://www.ncees.org/exams/states/CA.php.
3) Apply to the California Board for EIT Certification AFTER passing the FE
a. Submit a complete EIT application and filing fee to the California Board. Application forms are
periodically updated. It is your responsibility to ensure that the current and correct form and fee is
filed. Applications will not be processed without a Social Security Number or an Individual
Taxpayer Identification Number (ITIN). You must sign this form certifying your eligibility in
accordance with 1) a. and 1) b. above.
b. See Question 2 for persons who have passed the FE exam in another state.
c. See Question 3 for exemption provisions to waive the FE exam
d. Do not apply to the California Board for an EIT until you have passed the FE examination.
2
If an applicant passes the EIT/FE examination in a
state other than California, must the applicant pass
the examination again in California to qualify for the
professional engineer's examination?
No. Applicants will not be required to take the FE exam a second time, provided the exam was an 8-hour
written EIT/FE exam. Proof of taking and passing this examination must be verifiable by the appropriate
states Engineering Board. Copies are not accepted, only certified Board Forms directly received from the
other state.
Use this California Board form to submit to the state Board where the FE exam was taken and passed:
http://www.bpelsg.ca.gov/pubs/forms/verification.pdf
3
Who is exempt from the requirement to pass the FE
exam as a prerequisite for the professional exam or
comity?
a.
A person who has taken and passed the FE exam in another state obtained by passing an 8hour written examination. (See Question 2)
b.
A person who holds a valid license in another branch of professional engineering in California.
c.
Board Approved Engineering Degree (ABET)

1. A person holding a BS degree in engineering from an ABET accredited curriculum and has
15 or more years of qualifying work experience. Qualifying work experience is defined in
Question 5, part b.
2. A person holding a BS and a Masters degree in engineering from ABET accredited
programs and has 14 or more years of qualifying work experience.
d.
Board Approved Engineering Technology Degree (ABET)

1. A person holding a BS degree in engineering technology from an ABET accredited
curriculum and has 17 or more years of qualifying work experience.
2. A person holding an approved BS degree in engineering technology; and a Masters
degree in engineering from an ABET accredited program, and has 14 or more years of
qualifying work experience.
e.
Non-Board Approved Engineering Degree

1. A person holding a BS engineering degree from a non-ABET accredited curriculum and
has 17 or more years of qualifying work experience.
2. A person holding a BS engineering degree from a non-ABET accredited curriculum and a
Masters degree in engineering from an ABET accredited program and has 14 or more
years of qualifying work experience.
f.
Board Approved Doctorate in Engineering

3
1. A person holding an earned doctorate in engineering from an ABET accredited program

with six years of experience.
2. A person serving in a tenure track faculty position in an approved engineering curriculum
at the level of Assistant Professor or higher.
Note: FE waivers are not available to applicants without an engineering BS, or an engineering
doctorate degree from an ABET accredited engineering program, or to applicants with a
non-ABET degree in engineering technology.
To check if your program is ABET accredited, use this link to the ABET website:
http://main.abet.org/aps/Accreditedprogramsearch.aspx
(Click on the state, then click on the school, then look for your degree program)
4
What are the steps that an applicant must take to
become licensed as a Professional Engineer by
examination in any branch of engineering?
A. For all branches of engineering, comply with all of the following requirements:
(1)
(2)
(3)
(4)
(5)
(6)
Not have committed any acts or crimes which would be grounds for denial of license (see
Question 18).
Become certified as an "Engineer-in-Training" (EIT) by passing the FE exam in California or in
another state, or by qualifying for a waiver thereof (see Questions 2 and 3).
Review the Professional Engineer application instructions, flowcharts and forms online at:
http://www.bpelsg.ca.gov/applicants/
Complete online, the application and Part A of the engagement record portion of the
Engagement Record and Reference Forms and include evidence of sufficient qualifying
experience with no gaps or overlapping engagements and with all statements made under
oath. An engagement is a period of time for which engineering experience was gained without
a significant change of responsibility. The use of the words "see attached" or see NCEES
record and the inclusion of additional documents and/or a resume is not acceptable and may
not be substituted for the completed engagement record portion of the forms. The
engagement record portion of the forms must be completed in sufficient detail to allow the
Board to determine that the nature and the extent of the engineering work claimed to have
been performed by the applicant has indeed been qualifying (see Question 19 for the required
amount of experience to be verified). While typing may seem to be an unreasonable
requirement, the Board receives about 13,000 applications a year, all of which must be
reviewed by several different people, and microfilmed. Hence the requirement that the
application and accompanying forms must be completed online and printed or typewritten;
handwritten applications and forms will not be accepted.
Sign the application and the engagement record portion of the Engagement Record and
Reference Forms under penalty of perjury. Applications will not be processed without a
handwritten signature and either a Social Security Number or an Individual Taxpayer
Identification Number.
Send Part A and Part B of the Engagement Record and Reference Forms to the required
reference persons. The engineers serving as your references must sign the bottom of Part A,
complete Part B and sign and seal the form, seal both pages in the envelope you have
provided, sign across the flap, affix their seal, and return the sealed envelopes to the
applicant. See Questions 7, 25, & 26 for important information about references.
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Include original, sealed transcripts with your application. If the applicant is claiming
experience credit for education, he or she should contact their college and have a current
copy of his or her official transcript sent to him or her in a sealed envelope. Credit will only be
given for education if an official transcript is received in a sealed envelope, and it clearly
shows the degree received and the date it was issued. If a college will not provide an official
transcript, or if the college is no longer in existence, the applicant should include notarized
photocopies of the transcripts in their possession. If the applicant's name as it appears on the
transcript does not match the name used on the application, an explanation must be provided
regarding the name change. If the original transcript or other educational document is in a
language other than English, a copy of it must be accompanied by an original notarized
English translation. Thus, foreign education from a non-English speaking university must be
verified by certified copies of the original documents in the non-English language, and by the
originals of the documents comprising the certified English translation. (Documents of this
type do not need to be received in a sealed envelope.)
Include two self-addressed, stamped postcards or envelopes with your application if you wish
to be notified of your application processing. Phone calls and emails asking for application
status cannot be handled by staff due to heavy workloads. Applicants can confirm with their
bank that the application check has been processed, and receipt of the postcards will confirm
processing and approval of applications.
Complete and pass the Take-Home Examination on California engineering laws and the
Board's rules. The test is available on the Boards website and the answer sheet must be
submitted with the application to avoid delays in issuing the applicant's license.
A complete application includes a two page application, at least four Engagement Record and
Reference Forms in signed and sealed envelopes, sealed transcripts, the Take Home Exam
answer sheet, two self-addressed stamped postcards, the applicable application fee and any
required state specific exam fees. All forms must be originals, signed and sealed, printed or
typed. Minimum font size is 8. Complete applications must be mailed to the Board and it
must be postmarked or hand delivered by the final filing date. It is highly recommended that a
traceable mailing method be used.
If you passed the EIT/FE exam in another state, contact the state board where you passed the
exam and request that they send verification directly to the California Board. Copies of EIT
Certificates or FE exam results are not accepted.
Complete the NCEES registration process for the PE examination when NCEES opens their
website at http://www.ncees.org/exams/states/CA.php. Register only after receiving your
second notification postcard from the CA Board stating that your application has been
approved. E-mail the registration summary sheet to your evaluator at the Board.
Pass the appropriate eight-hour professional engineer's examination.
B. For persons seeking a civil engineering license:

(1)
(2)
Comply with all of the steps (1) through (13) listed above.
In addition, the applicant must pass the California Civil exams in Seismic Principles and on
Engineering Surveying, which are given as two additional 2-hour computer base tested
(CBT) exams.
Payment of the exam fees for the Seismic Principles and Engineering Surveying exams must
be paid by the final filing date for the exam. Civil applicants are not required to take all 3
exams during the same administration; however the California Board application fee is due for
each administration period along with a re-file application.
Once a civil application is approved, the applicant will be responsible for registering,
scheduling an exam date, and paying additional exam administration fees to the Boards exam
vendor. The Board will notify approved candidates via e-mail when registration opens
(generally 5-6 weeks prior to the exam date).
6
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
5
What type of activity constitutes qualifying experience for a
professional engineer license and how many years of credit may
be obtained for each type?
a. Credit is given toward the six-year qualifying experience requirement as follows:
(1)
(2)
Undergraduate Education
(a)
Four years' credit for graduation with an engineering degree from a Board
approved engineering curriculum (see Question 1, part b). Canadian
engineering programs accredited by the Canadian Engineering
Accreditation Board entitle the graduate to four years credit. Except in
very unusual circumstances, the credit will be granted as of the date
indicated on the official transcript that the degree was actually awarded.
This four years credit will NOT be given to a graduate from a nonABET approved engineering curriculum.
(b)
Two years credit for graduation with a bachelor's level engineering

technology degree, or one year credit for graduation with an associate
level engineering technology degree, from a technology curriculum which
has been accredited by the Technology Accreditation Commission (TAC)
of ABET.
(c)
Two years credit for graduation with an engineering degree from any
school whose engineering curriculum is not Board approved (this includes
all foreign schools). Transcripts from foreign universities must be
translated if not in English.
(d)
The Board may at its discretion give credit as qualifying experience of up

to one-half year for each year of successfully completed study (not to
exceed two years maximum credit) in an engineering curriculum which
did not result in a four-year engineering degree. A year of undergraduate
education is equal to 32 semester units or 48 quarter units. This credit
will not be granted for any education which overlaps with qualifying work
experience.
Post-Graduate Education
The Board may give a maximum of one year credit as qualifying experience for
satisfactorily completed graduate work in an ABET-approved engineering
curriculum. No credit will be given for foreign graduate work or graduate work
7
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
done in any non-ABET approved curriculum. Completed post-graduate work is

work for which a degree has been received.
Effective January 1, 2007, applicants who possess a board-approved
postgraduate degree in engineering will receive 5 years of experience credit
toward the 6-year experience requirement regardless of the undergraduate
degree. A board-approved postgraduate degree is one where either the
undergraduate or postgraduate engineering curriculum is accredited by ABET.
(3)
Engineering Teaching
The law allows the Board to give a maximum of one year credit as qualifying
experience for engineering teaching in a college curriculum, provided that an
applicant is claiming no more than four years credit for education.
(4)
Engineering Work Experience

Qualifying engineering work experience is that experience in the appropriate
branch of engineering which has been gained while performing professional level
engineering tasks under the direction of a person authorized to practice in the
branch of engineering in which the applicant is seeking licensure. There is no
limit to the amount of such qualifying experience which will be accepted by the
Board, provided that the experience meets the other requirements indicated
herein. Applied engineering research is considered to be an engineering task,
which may constitute qualifying experience.
Work in management, proposal writing, contract administration, estimating, sales,
and other peripheral areas, however, is presumed to contain little or no element
of qualifying experience, and therefore an applicant must provide a detailed
explanation of what portions of such work are actually qualifying and why the
Board's presumption is not correct, if the applicant expects to obtain any credit
for this type of work. Such peripheral experience will then be evaluated on a
partial credit basis as applicable to each applicant's particular situation. Thus,
the actual credit allowed may range from near zero to a substantial amount.
All civil engineering work experience must be gained while working under the
direction of a licensed Civil Engineer.
For applicants claiming education credit, work experience must begin after
the date of graduation, as shown on the transcripts, and be complete prior
to the exam final filing date. Official school transcripts or an official letter from
the College Registrar, indicating the date that all of the degree requirements
were met, are the only acceptable means of verifying graduation dates.
Applicants not claiming any education credit must take and pass the EIT exam
and be able to verify at least six years of professional level engineering work.
Subprofessional work such as work normally performed by a drafter or a
technician is not qualifying. Nor is construction inspection qualifying. However,
work as a field engineer may be qualifying. The distinction is covered by Section
6703.1 of the B & P Code, which reads as follows:
"Supervision of the construction of engineering structures' means the
periodic observation of materials and completed work to determine
general compliance with plans, specifications, and design and
8
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
planning concepts. However, `supervision of the construction of

engineering structures' does not include responsibility for the
superintendence of construction processes, site conditions,
operations, equipment, personnel, or the maintenance of a safe place
to work or any safety in, on, or about the site. For purposes of this
subdivision, `periodic observation' means visits by an engineer, or his
or her agent, to the site of a work of improvement."
Work between semesters while in college is not qualifying experience because
(1) it is usually at a subprofessional level and (2) credit as experience cannot be
given for two types of experience, which occur in the same time period. Since a
full year's credit is given for two semesters or three quarters of schoolwork, giving
credit for work performed during the summer would be double counting.
A problem area that often occurs with professional engineer applicants trying to
use the same experience more than once. This happens because there is some
degree of overlap between the various branches of engineering. Consequently,
applicants often construe their experience as being all applicable to the one
branch in which they are applying, so that they can gain maximum experience
credit. They do not separate out different kinds of experience, but instead, they
lump it altogether. The application reviewer, however, must apply a strict
interpretation of the experience in each engineering branch, as determined by
the statutes and the Board Rules. Thus, in such situations, the reviewer must
attempt to determine from the information provided by the applicant, exactly how
much of the applicant's experience can be accepted for credit toward licensure in
the branch in which the person has applied, and invariably, the result is that the
applicant often receives less credit than he or she expected. In situations where
the applicant has verified only marginally sufficient experience, this often results
in an applicant being found ineligible for lack of sufficient qualifying experience.
For instance, applicants frequently confuse what is civil engineering and what is
traffic engineering. Engineering work such as traffic periodicity, street and
highway capacity studies, traffic forecasting, signal placement and timing,
pavement striping, parking lot layout, and other related items, are traffic
engineering and do not count as civil engineering work experience. Other areas
of engineering such as geometric studies which are preliminary to the design of
fixed works, e.g., the planning of intersection layouts and turnouts, may be used
as experience credit for either civil engineering or traffic engineering, but the
same experience cannot be used for both licenses because the experience
requirements are different for both disciplines.
Similar overlaps occur between electrical engineering and traffic engineering.
Engineering work such as signal system design, highway lighting, the design of
special highway message signs, and the design of ramp or lane metering
systems, while traffic related, is in fact electrical engineering, not traffic
engineering.
Another area of overlap is piping design. The design of municipal water and
sewer systems and their associated pipes is clearly civil engineering, but the
design of similar piping systems which occur within a building (with the exception
perhaps of nuclear power plants) is customarily considered to be mechanical
engineering. Thus, as a handy rule of thumb, a building perimeter can be
considered as a line of demarcation between the two disciplines when it comes
to piping design.
9
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
Work experience which has been used to qualify for licensure in one branch of
engineering may not be used again to qualify in another branch of engineering.
Therefore, applicants who wish to qualify for licensure in more than one branch
of engineering must provide evidence of sufficient qualifying experience in each
branch in which they wish to seek licensure. In the situation where an applicant's
professional experience includes work covered by more than one of the branches
of engineering for which licensure is granted in California, the applicant should
include with his or her description of their experience on a particular application a
summary of only the experience which is pertinent to the branch of engineering
covered by that application, and an indication of what percent of their total
experience (what percent of the time for each engagement) is applicable to that
branch of engineering. For instance, if a particular engagement includes some
civil, electrical, and mechanical engineering work, an applicant applying for a
mechanical engineer license should list the total time applicable to the entire
engagement, should describe only the work experience applicable to the field of
mechanical engineering, and should specify the percent of the time during that
engagement that the mechanical engineering work was performed. An applicant
for licensure as a Civil Engineer must have gained their work experience under
the direction of a Civil Engineer legally qualified to practice in the state or country
where the work was done.
Total months of qualifying experience does not include time spent in training
(except in a recognized rotation program); subprofessional tasks, i.e., drafting,
technician work, etc.; non-professional tasks, i.e., sales, construction, etc.;
overtime (experience which consists of more than 40 hours per week); work in a
second job ("moonlighting"); or engineering not in the branch for which the
applicant is applying. Thus, the total months of qualifying experience
accepted by the Board may be less than the total number of months the
applicant has claimed to have worked.
b. Credit is given toward the qualifying experience requirement for a waiver of the EIT
examination as follows:
Same as provision a. (2), (3) and (4) above; i.e., post-graduate education,
engineering teaching, engineering work experience. NOTE: The education
credit described in (a) above does not apply to EIT waiver applicants.
10
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
6
Can an applicant receive any experience credit toward a
professional engineer license by passing either the EIT/FE or
LSIT/FLS examinations?
No.
11
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
7
Must an applicant's references be licensed in the same
engineering branch that the applicant is seeking licensure?
That depends. If the applicant is applying for licensure as a civil engineer, and the experience
offered has taken place in the United States, all references must be licensed engineers
authorized to practice civil engineering, or federal employees (see Question 26). If a civil
engineer applicant has had qualifying work experience outside of the United States, the
references for that experience must be from persons authorized to practice civil engineering in
accordance with the laws of the country in which the experience took place. If such references
are not licensed civil engineers, they must provide information, which indicates by what authority
they are authorized to practice civil engineering.
If the applicant is applying for licensure as an electrical or mechanical engineer, all references
must be from engineers authorized to practice in the discipline in which the applicant is seeking
licensure, by virtue of licensure or by exemption. Since licensed civil engineers are
authorized to perform supplementary electrical and mechanical engineering work, such persons
may serve as references if they meet other requirements. See Question 26 for information on
satisfactory references.
If the applicant is applying for licensure in any of the remaining branches of professional
engineering, all references should be from engineers, scientists, or technical persons who meet
the satisfactory reference requirements of Question 26. Since these other branches are not
practice regulated, anyone is authorized to practice in those branches, and thus anyone can
serve as a reference. However, the reference must have sufficient knowledge of the applicant's
engineering specialty to be able to make knowledgeable comments about the applicant's
performance on the job.
12
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
8
Does the Board have a temporary license category,
which will allow an engineer to practice in California?
California does not issue temporary licenses. It is recommended that an applicant obtain a
California license through the comity process.
13
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
9
What steps must an applicant take to obtain the authority to use
the title "Structural Engineer?"
The applicant must comply with all of the following requirements:
a.
Not have committed any acts or crimes, which would be grounds for denial of
licensure (see Question 18).
b.
Have a valid, unexpired license as a Civil Engineer in California.
c.
Obtain the Structural Engineer application package from the Boards website or
by requesting a copy from the Board office.
d.
Obtain at least three references who are authorized to use the title "Structural
Engineer" by having passed the Western Zone Structural Engineer Examination
and who have personal knowledge of the applicant's qualifying work experience.
See Question 26, part c for information on how to obtain suitable references.
These three references, taken together, must verify three full years (36 months)
of responsible charge experience. Responsible charge experience does not
begin until licensure as a professional or civil engineer has been obtained (in
California the date used is that of the last part of the exam by which the applicant
obtained his or her license. See Question 22, part d.)
e.
Type the application and the engagement record portion of the Engagement
Record and Reference Forms with all statements made under oath. The use of
the words "see attached" and the inclusion of additional documents and/or a
resume is not acceptable and may not be substituted for the completed
engagement record portion of the forms. The engagement record portion of the
forms must be completed in sufficient detail to allow the Board to determine that
the nature and the extent of the structural engineering work claimed to have been
performed by the applicant has indeed been qualifying. Since the space
provided on each form for the description of experience is somewhat limited, it is
permissible for the applicant to continue the description of his or her experience
on another sheet of paper, provided however, that the experience description
must begin in the space provided on the board approved form. (See Question
19 for the required amount of experience to be verified). While typing may seem
to be an unreasonable requirement, the Board receives about 13,000
applications a year, all of which must be reviewed by several different people,
and microfilmed. Hence, the requirement that the application and accompanying
forms must be typewritten; handwritten applications and forms will not be
accepted.
14
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
f.
Sign the application and the engagement record portion of the Engagement
Record and Reference Forms under penalty of perjury.
g.
Send the Engagement Record and Reference Forms to the reference persons.
The references must complete their portion of the form (PART B), sign the form,
affix their seal or stamp to the form, seal it in the envelope provided, sign across
the flap and affix their seal over their signature and return the sealed envelopes
to the applicant. References from persons with structural authority in states
other than California must be notarized to indicate that the license which qualifies
that person to be a reference is still valid and unexpired.
h.
If the applicant wishes to be notified when his or her application has been
forwarded to professional staff for review, and when the review of the application
is complete, the applicant should include two postcards with his or her name and
address on the front and the required postage affixed.
i.
Return the two stamped cards (optional), the typed application, the typed
Engagement Record and Reference Forms in the sealed envelopes, along with
the applicable filing fee, to the Board. All of the foregoing material must be
returned to the Board in the envelope provided and it must be postmarked or
hand delivered by the final filing date.
j.
Take and pass the 16-hour NCEES Structural lateral and vertical examination.
For additional information please refer to the Structural FAQ's,
http://www.bpelsg.ca.gov/applicants/se_faqs_5_12.pdf
15
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
10
May an applicant file for the structural authority sooner than three
years after obtaining their license as a civil engineer in California?
Yes, under certain circumstances. The Board will consider an application submitted sooner
than three years after licensure as a Civil Engineer in California by a person who meets any of
the following requirements:
a.
Has practiced under the exemption for officers and employees of the government
of the United States of America; or:
b.
Has actually practiced in responsible charge in another state (licensure in

another state does not allow for responsible charge experience in California); or:
c.
Has practiced in responsible charge in another country.
The Board will accept an applicant under any one of the above conditions provided that the
conditions occurred prior to the time that the applicant arrived in California, provided that the
applicant has six years of qualifying experience that can be counted toward the application for
licensure as a Civil Engineer and at least three additional years experience in structural
engineering work in excess of those six years required for the civil engineering license, and
further provided that an applicant who wishes to be considered under any of these provisions
so indicates to the Board at the time of filing of his or her application, and files the application at
least six months prior to the announced final filing date for the examination for which the
applicant is applying.
16
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
11
What constitutes structural engineering work?
Structural engineering includes, but is not limited to the application of specialized civil
engineering knowledge and experience to the design and analysis of buildings (or other
structures) which are constructed or rehabilitated to resist forces induced by vertical and
horizontal loads of a static and dynamic nature. This specialized knowledge includes familiarity
with scientific and mathematical principles, experimental research data and practical
construction methods and process, and the design and analysis shall include consideration of
stability, deflection, stiffness and other structural phenomena that affect the behavior of
buildings (or other structures). Checking of structural plans on major projects will also be
considered as qualifying structural work when done under the immediate supervision of and
certified by a licensed Civil Engineer having authority to use the title "Structural Engineer."
17
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
12
What type of experience is the Board looking for as it pertains to
structural engineering work?
Structural design experience in all areas as specified in subdivisions (1)-(6) below because the
stability of a structure is dependent upon the interaction of the individual structural components
as well as the structure as a whole:
a.
Common Construction Materials - Steel, Concrete, Wood and Masonry: Be

competent in the use of three of the four common construction materials of steel,
concrete, wood, and masonry as they relate to the design, rehabilitation and/or
investigation of buildings (or other structures);
b.
Determination of Lateral Forces - Have expertise regarding structural design to

resist lateral forces, because the lateral stability of a building (or other structure)
is critical to the safety of its occupants especially in an earthquake sensitive area
such as California;
c.
Selection of Framing Systems - Have expertise regarding the selection of framing

systems, which is the consideration of alternatives and the selection of an
appropriate system for the interaction of structural components to support vertical
and lateral loads;
d.
Selection of Foundation Systems - Have experience in the selection of

foundation systems, which is the consideration of alternatives and the selection
of an appropriate type of foundation system to support the structure;
e.
Application of Code Requirements - Be knowledgeable of all applicable local,

state and federal legal requirements relating to design loads, materials, and
detailing because the client (public) relies upon the engineer to ensure that the
structural design meets these requirements;
f.
Multi-story Buildings or Equivalent Multi-level Structures - Have experience with

the design and detailing for the transfer of forces between stories in multi-story
buildings or multi-story structures. A multi-story building is a building, which is,
more than one story in height and which is not exempted pursuant to Section
6737.1 of the Code.
18
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
13
What steps must an applicant take to obtain the authority to use
the title "Geotechnical Engineer?"
The applicant must comply with all of the following requirements:
a.
Not have committed any acts or crimes, which would be grounds for denial of
licensure (see Question 18).
b.
Have a valid, unexpired license as a Civil Engineer in California.
c.
Obtain the Geotechnical Engineer application package from the Boards website
or by requesting a copy from the Board office.
d.
Obtain at least four references who are licensed as civil engineers, two of which
must be or must have been actively engaged in the practice of geotechnical
engineering. References are not required to hold the authority to use the title
"Geotechnical Engineer," but such references are certainly acceptable.
e.
Type the application and the engagement record portion of the Engagement
Record and Reference Forms with all statements made under oath. The use of
the words "see attached" and the inclusion of additional documents and/or a
resume is not acceptable and may not be substituted for the completed
engagement record portion of the forms. The engagement record portion of the
forms must be completed in sufficient detail to allow the Board to determine that
the nature and the extent of the geotechnical engineering work claimed to have
been performed by the applicant has indeed been qualifying (see Question 19 for
the required amount of experience to be verified). Since the space provided on
each form for the description of experience is somewhat limited, it is permissible
for the applicant to continue the description of his or her experience on another
sheet of paper, provided however, that the experience description must begin in
the space provided on the board approved form. While typing may seem to be
an unreasonable requirement, the Board receives about 13,000 applications a
year, all of which must be reviewed by several different people, and are
microfilmed. Hence, the requirement that the application and accompanying
forms must be typewritten; handwritten applications and forms will not be
accepted.
f.
Sign the application and the engagement record portion of the Engagement
Record and Reference Forms under penalty of perjury.
19
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
g.
Send the Engagement Record and Reference Forms to the reference persons.
The references must complete their portion of the form, sign the form, affix their
seal or stamp to the form, seal it in the envelope provided, sign across the flap
and affix their seal over their signature and return the sealed envelopes to the
applicant. References from persons licensed in states other than California must
be notarized to indicate that the license which qualifies that person to be a
reference is still valid and unexpired.
h.
If the applicant wishes to be notified when his or her application has been
forwarded to professional staff for review, and when the review of the application
is complete, the applicant should return the two postcards with his or her name
and address on the front and the required postage affixed.
i.
Return the two stamped cards (optional), the typed application, the typed
Engagement Record and Reference Forms in the sealed envelopes, along with
the applicable filing fee, to the Board. All of the foregoing material must be
returned to the Board in the envelope provided and it must be postmarked or
hand delivered by the final filing date.
j.
Take and pass the eight-hour written California geotechnical engineering

examination.
20
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
14
To be qualifying, how much of an applicant's work experience
must be in geotechnical engineering?
Qualifying experience is geotechnical engineering experience satisfactory to the Board which
has been gained on an equivalent full-time basis. If at least one-half of the applicant's full-time
professional practice is in geotechnical engineering, credit will be given for an applicant's
geotechnical engineering experience as a percentage of equivalent full-time work, except that a
teacher of geotechnical engineering at an ABET accredited school of engineering will be given
credit for applicable consulting work as a percentage of equivalent full-time work. Qualifying
experience does not include overtime, training, management, subprofessional or nonengineering experience. Qualifying experience may be less than the total number of months
worked.
21
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
15
What constitutes geotechnical engineering work?
Geotechnical engineering, as it relates to the authorization to use the title "Geotechnical
Engineer, is the investigation and engineering evaluation of earth materials including soil, rock,
groundwater and man-made materials and their interaction with earth retention systems,
structural foundations and other civil engineering works. The practice involves application of the
principles of soil mechanics and the earth sciences, and requires a knowledge of engineering
laws, formulas, construction techniques and performance evaluation of civil engineering works
influenced by earth materials. The terms "Geotechnical Engineer" and "Soils Engineer" are
deemed to be synonymous with the term "Soil Engineer."
22
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
16
What type of experience is the Board looking for as it pertains to
geotechnical engineering work?
"Qualifying experience" means responsible charge of geotechnical engineering projects.
Evidence shall be provided that the applicant has qualifying experience in the areas described
in subdivisions (a), (c) and (e) herein and has demonstrated working knowledge in the areas
described in subdivisions (b) and (d). At least one-half of the applicant's annual full-time
professional practice shall be in geotechnical engineering, except that a teacher of geotechnical
engineering and related courses at a Board approved school of engineering will be given credit
for applicable consulting work as a percentage of equivalent full-time work. Applicable
consulting work shall be substantiated by references and project documents.
a.
b.
Development of programs of geotechnical investigation which includes, but is not

limited to:
(1)
Communication with other design consultants to determine their

geotechnical input needs:
(2)
Performance of literature searches, site history analyses, etc., related to

surface and subsurface conditions;
(3)
Formulation or engineering evaluation of field exploration and laboratory

testing programs to accomplish the scope of the investigation;
(4)
Preparation or engineering evaluation of proposals.
Performance of geotechnical field and laboratory studies, which includes, but is

not limited to:
(1)
Direction and/or modification of field exploration programs, as required

upon evaluation of the conditions being encountered;
(2)
Classification and evaluation of subsurface conditions.
(3)
Understanding the purposes for and being qualified to perform routine

field and laboratory tests for:
a
b
c
d
soil strength
bearing capacity
expansion properties
consolidation characteristics
23
F R E Q U E N T L Y
A S K E D
e
f
g
h
I
j
k
l
c.
soil collapse potential

erosion potential
compaction characteristics
material acceptability for use in fill
pavement support qualities
freeze-thaw properties
grain size
permeability/percolation properties
Analysis of geotechnical data and engineering computations which includes, but

is not limited to:
(1)
Analysis of field and laboratory test results regarding:

a
b
c
d
e
f
g
h
I
j
k
l
m
n
(2)
soil strength
bearing capacity
expansion properties
consolidation characteristics
soil collapse potential
erosion potential
compaction characteristics
material acceptability for use in fill
pavement support qualities
freeze-thaw properties
grain size
permeability/percolation properties
groundwater conditions
soil dynamic properties
Performance of computations using test results and available data

regarding:
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
d.
Q U E S T I O N S
bearing capacity
foundation type, depth, dimensions
allowable soil bearing pressures
potential settlement
slope stability
retaining systems
soil treatment
dewatering/drainage
floor support
pavement design
site preparation
fill construction
liquefaction potential
ground response to seismic forces
groundwater problems; seepage
underpinning
Performance or engineering evaluation of construction, post-construction and site

monitoring which includes, but is not limited to:
24
F R E Q U E N T L Y
e.
A S K E D
Q U E S T I O N S
(1)
Performance or supervision of geotechnical testing and observation of

site grading;
(2)
Analysis, design and evaluation of instrumentation programs to evaluate

or monitor various phenomena in the field, such as settlement, slope
creep, porewater pressures and groundwater variations;
(3)
Geotechnical observation during construction and/or installation, including

but not limited to, spread foundations, drilled piers, piles, slurry walls,
anchors, bulkheads, shoring, underpinning and subdrains;
(4)
Engineering evaluation of soil-related distress.
Preparation or engineering evaluation of geotechnical reports which includes, but

is not limited to:
(1)
Preparation of appropriate plans, logs, test results and other exhibits;
(2)
Documentation testing and observation;
(3)
Preparation of written reports which present findings, conclusions and

recommendations of the investigation;
(4)
Preparation of specifications and guidelines for achieving the intent of

subdivision (e)(3), above.
25
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
17
A person is a licensed Professional, Geotechnical, or Structural
Engineer in another state of the United States. Can such an
engineer obtain licensure in California (by comity) without retaking
the regular written examinations?
Usually, if the engineer complies with all of the following requirements:
a.
Provide evidence of having passed an eight-hour, written EIT/FE examination or

be exempt therefrom (see Question 3 for criteria for exemption).
b.
Provide evidence of having gained licensure in another state by passing an

eight-hour written professional engineering examination [except for structural
and geotechnical engineering; see (h) below]. That license must be current at
the time that the application is submitted, or it must have been transferred to
another state where the other state license is current. An applicant for licensure
as a professional engineer in California by comity may only receive such a
license in one branch of engineering, unless the applicant has passed more than
one 8-hour professional engineering examination. Thus, an applicant who has
obtained one license in California by comity will usually have to take the
professional engineer's examination for each additional branch of engineering in
which they desire licensure. Furthermore, if an applicant cannot substantiate
that he or she took a branch specific eight-hour written professional engineering
examination, their application will be reviewed by members of the Board prior to
developing a decision whether or not to grant licensure by comity to the
applicant.
c.
For the branch of engineering in which the applicant is requesting comity with
California, provide evidence that the applicant's education and experience is
qualifying in conformance with California law. Thus, if an applicant's license in
another state is generic (e.g., Professional Engineer) and is current, the applicant
may gain licensure in the particular California branch to which his or her
experience and education indicate the closest relationship, if any.
d.
Submit the application package for the branch in which the applicant wishes to
be considered. This application package is the same one as for taking the
examination, so the applicant must indicate on the application that he or she
desires comity. See Questions 4 and 9. Comity applicants submitting NCEES
Council records must complete the Application for Licensure as a Professional
Engineer form, items 1-12, including the Engagement Summary. Engagement
26
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
Record and Reference Forms need not be submitted unless the NCEES council
record is not current. Civil engineer applicants must have references from at
least four civil engineers.
e.
Enclose a check or money order for the application fee.
f.
Pass a take-home written test on California engineering laws and rules. In

addition, to obtain a civil engineering license, an applicant must pass additional
written tests on seismic principles and engineering surveying principles. See
Question 4, part b.
g.
Allow approximately three months for processing.
h.
To obtain comity in structural engineering, an applicant must first become

licensed as a Civil Engineer in California. For comity as a Structural Engineer,
the applicant must have obtained licensure as a Structural Engineer either by
taking and passing the 16-hour Western States Structural Engineer Examination;
by taking and passing the 8-hour NCEES Structural II examination and the
Washington state-specific structural engineering examination; or by taking and
passing the 8-hour NCEES Structural II examination and the California statespecific Structural Engineering Seismic examination or by taking and passing the
16-hour NCEES Structural exam (lateral and vertical). At present there is no
comity with other states for geotechnical engineering. (See also Question 9
for other application requirements.)
27
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
18
What acts or crimes are grounds for denial of certification or
licensure?
Such acts or crimes include, but are not limited to, any act which, if done by a licensee, would
be grounds for disciplinary action against that licensee by the Board; a violation of any provision
of the Professional Engineers Act; or conviction of a crime (felony or misdemeanor) that is
substantially related to the qualifications, functions, and duties of a professional engineer if, to a
substantial degree, it evidences present or potential unfitness of a professional engineer to
perform the functions authorized by his or her license in a manner consistent with the public
health, safety or welfare.
28
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
19
How much experience is required to qualify for each level of
certification or licensure?
The required experience for each level of certification or licensure is as follows:
a.
EIT
Three years of engineering-related work experience or three years of full-time
study in a Board approved engineering curriculum (see Question 1, part b).
b.
PE
With an EIT certificate, six years of professional level qualifying experience in the
branch of engineering in which the applicant is seeking licensure, less applicable
credit for verified education (if any).
c.
Geotechnical
Four years of responsible charge experience in geotechnical engineering after
licensure as a civil engineer, less a maximum of one year credit for post-graduate
education (if not previously used).
d.
Structural
Three years of responsible charge experience in structural engineering after
licensure as a civil engineer, except for persons who have been operating under
an exemption or have been practicing in another state or country.
For all applications, qualifying experience will be considered to have been obtained only
up to the date that the application was completed unless the application was completed
within 30 days of the final filing date (see Question 21). The completion date is
considered to be the date indicated by the latest date on which any reference signed the
reference form, or the date that the application was signed, whichever comes first.
29
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
20
What constitutes satisfactory evidence of qualifying experience in
engineering work related to the field of engineering in which the
applicant is applying?
a.
PROFESSIONAL ENGINEERS:
(1)
For academic credit:
(a)
(2)
An official transcript of the applicant's grades and degrees

furnished by the college in a sealed envelope. If any portion of
this information is in other than the English language, it must be
accompanied by a certified English translation.
For work experience credit, including teaching:

(a)
The typed summary of the applicant's experience as contained in

the Engagement Record and Reference Forms, and positive
recommendations by the references, including their verification of
the applicants claim of qualifying experience.
(b)
The summary of the applicants experience should include the

following:
(i)
Tasks or activities the applicant has participated in; e.g.,

design, analysis, plan checking, field inspection, start up
review, etc.
(ii)
The applicant's level of responsibility; e.g., drafter, junior

engineer, engineering team leader, project engineer,
engineering manager, vice-president of engineering, etc.
(iii)
Engineering decisions made in connection with (iv) below;

e.g., selection of type of material or equipment to be
specified, type of system to be used, etc., including
acceptance criteria.
Type of projects the applicant has worked on; e.g., bridges,
buildings, electronic circuits, HVAC, major structures,
transmission lines, water treatment facilities, etc. (The
applicant should provide some detail such as the size of
the project, [square feet, stories, acres, etc.] level of
complexity, flow rates, capacity, or other pertinent data).
(iv)
30
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
The description should be of a selection of projects which

indicates the breadth and depth of the experience gained.
Projects do not necessarily have to be identified by name,
but the description should contain sufficient technical
information so that the reviewer can judge the importance
of the project and/or its uniqueness.
b.
GEOTECHNICAL ENGINEERS:
(1)
For academic credit for a postgraduate degree:
(a)
(2)
c.
An official transcript of the applicant's grades and degree

furnished by the college in a sealed envelope. This credit will only
be given if the degree was not used for credit to qualify for the
applicant's civil engineering license.
For work experience credit:

(a)

(b)
The summary of the applicant's experience should include the

following:
(i)
The extent to which the applicant has been involved with

the development of programs of geotechnical investigation.
(ii)
The extent to which the applicant has performed

geotechnical field and laboratory studies.
(iii)
The extent to which the applicant has performed an

analysis of geotechnical data and engineering
computations.
(iv)
The extent to which the applicant has performed an

engineering evaluation of construction, post-construction,
or site monitoring activities.
(v)
The extent to which the applicant has prepared or

performed an engineering evaluation of geotechnical
reports.
STRUCTURAL ENGINEERS:
(1)
There is no academic credit available to structural applicants, therefore
no transcripts are required.
(2)
For work experience credit:

(a)

31
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S

(b)
The summary of the applicants experience should include the

following:
(i)
The types of projects on which the applicant has worked

(buildings, bridges, other structures, etc.).
(ii)
The structural system which the applicant selected for

each project.
(iii)
The construction material (wood, steel, masonry, or

concrete) which made up the structural system chosen for
each project.
(iv)
The size of each project (square feet, stories, height,

length, etc.).
It is not required to provide this information for every project on

which the applicant worked, just a relevant sample of projects
which will demonstrate the length and breadth of the applicant's
structural engineering experience, and how the applicant meets
the licensing requirements. Applicants providing insufficient detail
will be notified for additional information.
32
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
21
Will the applicant be given experience credit up to the date of the
examination for which the applicant has applied?
No. Experience credit will be given only to the completion date of the application, except that if
the references are signed within 30 days preceding the final filing date, the applicant will be
given credit to that final filing date (see Question 19 for information concerning the completion
date). In no case will experience credit be allowed for work experience which occurs after the
final filing date.
Applications, which are incomplete or deficient by the final filing date will not be processed for
the examination for which the applicant has applied. It is the applicant's responsibility to
make sure that the application package is complete, that it contains all of the required
information (Application form, Engagement Record and Reference Forms, transcripts,
etc.) and that it is received by the Board by the final filing date.
33
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
22
How is qualifying experience computed for the purpose of filing
an application?
Qualifying experience is computed as follows, for each of the different levels of applicants:
a.
For an EIT applicant, qualifying experience is that experience related to

engineering which began no less than three years prior to the date of filing of the
application.
b.
For a professional engineer applicant who does not have an engineering or

engineering technology degree, or who cannot verify that degree, qualifying
experience is counted from the date on which the applicant first began working at
a professional level and was performing engineering tasks. For an applicant who
has an engineering degree or an accredited engineering technology degree,
qualifying experience is counted from the date of the first professional
employment which began after the date of graduation, as shown on the
transcripts.
c.
For a geotechnical engineer applicant, qualifying experience is counted from the

date of the last part of the examination, which was passed to obtain a license as
a civil engineer, either in California, or in any other state.
d.
For a structural engineer applicant whose initial license as a civil engineer was
obtained in California, qualifying experience is counted from the date of the last
part of the examination which was passed to obtain that license as a civil
engineer. For an applicant whose initial license was obtained in another state,
qualifying experience is counted from the date of the last part of the examination
which was passed to obtain that license as a civil engineer.. There are certain
exceptions to this provision for persons who were employees of the Federal
Government, or who were practicing in another country.
Qualifying experience for all applicants is only counted up to the date of filing of the
application, unless the reference is signed within 30 days of the announced final filing
date for an examination, in which case it is counted up to that final filing date, but no
later.
34
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
23
How much experience must be verified by the references?
A reference form must be submitted to verify each engagement for which the applicant desires
credit. Lack of a reference for any period of experience will result in that period being excluded
from consideration. The total time covered by all of the satisfactory references must be
sufficient to demonstrate that the applicant meets the experience requirements.
35
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
24
What does the term "responsible charge" mean?
The term "responsible charge" is defined in the Professional Engineers Act, Business and
Professions Code section 6703, which states:
The phrase responsible charge of work' means the independent control and
direction, by the use of initiative, skill, and independent judgment, of the
investigation or design of professional engineering work or the direct engineering
control of such projects. The phrase does not refer to the concept of financial
liability.
This term is further defined in Board Rule 404.1, as follows:
The term responsible charge directly relates to the extent of control a
professional engineer is required to maintain while exercising independent
control and direction of professional engineering services or creative work and to
the engineering decisions which can be made only by a professional engineer.
(1)
Extent of Control. The extent of control necessary to be in responsible
charge shall be such that the engineer:
(A)
Makes or reviews and approves the engineering decisions defined
and described in subdivision (2) below.
(B)
In making or reviewing and approving the engineering decisions,
determines the applicability of design criteria and technical
recommendations provided by others before incorporating such
criteria or recommendations.
(2)
Engineering Decisions.
The term responsible charge relates to
engineering decisions within the purview of the Professional Engineers
Act.
Engineering decisions which must be made by and are the responsibility
of the engineer in responsible charge are those decisions concerning
permanent or temporary projects which could create a hazard to life,
health, property, or public welfare, and may include, but are not limited to:
(A)
The selection of engineering alternatives to be investigated and
the comparison of alternatives for the project.
(B)
The selection or development of design standards or methods,
and materials to be used.
(C)
The decisions related to the preparation of engineering plans,
specifications, calculations, reports, and other documents for the
engineered works.
(D)
The selection or development of techniques or methods of testing
to be used in evaluating materials or completed projects, either
new or existing.
36
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
(E)
(3)
The review and evaluation of manufacturing, fabrication, or

construction methods or controls to be used and the evaluation of
test results, materials, and workmanship insofar as they affect the
character and integrity of the completed project.
(F)
The development and control of operating and maintenance
procedures.
Reviewing and Approving Engineering Decisions. In making or reviewing
and approving engineering decisions, the engineer shall be physically
present or shall review and approve through the use of communication
devices the engineering decisions prior to their implementation.
The term responsible charge does not refer to any of the following:
(1)
(2)
(3)
the concept of financial liability;

management control in a hierarchy of professional engineers except as
each of the individuals in the hierarchy exercises independent
engineering judgment and thus responsible charge;
such administrative and management functions as accounting, labor
relations, personnel performance standards, marketing of services, or
goal setting. While an engineer may also have such duties in this
position, it should not enhance or decrease ones status of being in
responsible charge of the engineering.
37
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
25
How many references are required to be submitted with an
application?
a.
Applicants for licensure as a professional engineer must submit a minimum of
four satisfactory references from persons authorized to practice in the discipline
in which the applicant is applying (see Question 26) and who have personal
knowledge of the applicant's qualifying experience and who are not related by
birth or marriage to the applicant. Relatives may verify work experience, but
cannot count as one of the four references. Since at least one reference must
be submitted for each engagement claimed as qualifying experience, it may
be necessary for an applicant to submit more than the minimum of four
references. In any case, however, it is recommended that more than the
minimum number of four references be submitted when possible to avoid delays
in processing the application due to reference deficiencies. Both sides of the
Engagement Record and Reference Form must be completed in its entirety.
b.
GEOTECHNICAL ENGINEERS:
In connection with an application for authority to use the title "Geotechnical
Engineer," a minimum of four references is required. Since at least one
reference must be submitted for each engagement claimed as qualifying
experience, it may be necessary for an applicant to submit more than the
minimum of four references. In any case, however, it is recommended that
more than the minimum number of references be submitted when possible to
avoid delays in processing the application due to reference deficiencies.
c.
STRUCTURAL ENGINEERS:
In connection within an application for authority to use the title "Structural
Engineer", the applicant must submit references from at least three persons
authorized to use the title "Structural Engineer" in California or in a state which
has a comity agreement with California and who have personal knowledge of the
applicant's qualifying experience. Since at least one reference must be
submitted for each engagement claimed as qualifying experience, it may be
necessary for an applicant to submit more than the minimum of three
references. In any case, however, it is recommended that more than the
minimum number of references be submitted when possible to avoid delays in
processing the application due to reference deficiencies.
38
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
26
What constitutes a satisfactory reference in connection with an
application?
a.
For a professional engineer applicant, a satisfactory reference is one that
contains a positive response from the reference person, one that is completed
fully and signed by both the applicant and the reference person, one that is
completed by a person who is not a relative of the applicant, and one which
meets the additional requirements indicated herein. A "Not yet ready"
response to the question, " Do you consider the applicant technically
qualified to be licensed as a Professional Engineer?" is not considered a
positive response from a reference when the application is evaluated, and
will result in that reference being considered as unsatisfactory.
(1)
CIVIL ENGINEER
In general, civil engineer applicants are required to provide references
from licensed civil engineers or from persons otherwise authorized to
practice civil engineering.
Except for applicants with qualifying
experience gained while in Federal employment, all civil engineer
applicants verifying California work experience must provide references
from persons who are licensed as civil engineers in California.
Unlicensed persons or persons not licensed in the applicant's branch of
engineering, who are completing reference forms for federal employees,
should indicate their educational background or other information to
signify their engineering qualifications. If a civil engineer applicant has
had qualifying work experience outside of the United States, the
references for that experience must be from persons authorized to
practice civil engineering in accordance with the laws of the country in
which the experience took place. If such references are not licensed
engineers, they must provide information which indicates by what
authority they are (or were) authorized to practice civil engineering in that
country. For civil engineering work experience which was gained in
California or any other place where such work is required to be under the
jurisdiction of a licensed civil engineer, at least one of the applicants
licensed references must be from someone who is or was in a
supervisory capacity over the applicant, for each engagement for which
the applicant desires credit. An engagement not verified by a licensed
civil engineer supervisor will be considered as either non-civil engineering
experience, or illegal civil engineering experience, and in either case it will
not be acceptable.
39
F R E Q U E N T L Y
(2)
A S K E D
Q U E S T I O N S
ELECTRICAL and MECHANICAL ENGINEER

For electrical and mechanical engineer applicants who have worked in
situations where they were not exempt from all licensing requirements,
and for experience which has occurred in California, the reference forms
must be signed by licensed engineers authorized to practice in the branch
in which the applicant is applying.
In California, electrical and mechanical engineering work performed by
employees of the Federal Government, and employees of manufacturing,
mining, public utility, research and development, or other industrial
corporations is exempt, and thus, such employees may serve as
references whether or not they are licensed as long as they are qualified
to appraise the technical competency of the applicant.
Typical examples of exempt employers would be aerospace companies
such as Boeing, or McDonnell Douglas; public utilities such as San Diego
Gas & Electric or P.G.&E.; manufacturers of electrical or mechanical
equipment such as Allen Bradley, Square D, Trane or Carrier, etc.
Examples of non-exempt employers are consulting electrical or
mechanical engineering firms and state and local governments.
Also, since licensed civil engineers are authorized to practice
supplementary electrical and mechanical engineering, such engineers
may serve as references.
If the applicant has worked in a non-exempt situation, and if the applicant
does not know or has not worked with sufficient licensed engineers in his
or her field to be able to procure the minimum number of appropriately
licensed references, the applicant can solicit any appropriately licensed
engineer to review her/his work samples (drawings, calculations, reports,
etc.). Based on that review and a discussion with the applicant, such an
engineer can then serve as a reference. The foregoing procedure is only
permissible for supplementary references, and it is based on the
assumption that the applicant's primary reference for an engagement is a
licensed supervisor. If all else fails, the applicant should contact the
Board for instructions on how to obtain licensed references. In no case,
however, will references from unlicensed persons or references not
licensed in the applicant's branch of engineering be accepted in lieu of
references from appropriately licensed engineers, when the requirement
for having licensed references applies (i.e., when the applicant has been
working in a non-exempt area). Persons working in California in industry
or otherwise covered by the exemptions need not submit references from
licensed engineers, but must submit sufficient references to cover the
required period of experience. The determination as to whether or not the
employment is exempt is based on whether or not the employer is a
corporation and usually, but not always, whether or not the primary
business activity of the corporation is the making of a product.
Unlicensed persons or persons not licensed in the applicant's branch of
engineering, who are completing reference forms, should indicate their
educational background or other information to signify their engineering
qualifications (see Question 7, for more information).
40
F R E Q U E N T L Y
(3)
A S K E D
Q U E S T I O N S
OTHER BRANCHES OF PROFESSIONAL ENGINEERS

For applicants applying for licensure in any of the other branches of
professional engineering, all references should be from engineers,
scientists, or technical persons who meet the satisfactory reference
requirements described herein. Since these other branches are not
practice regulated, anyone is authorized to practice in those branches,
and thus anyone can serve as a reference. However, the reference must
have sufficient knowledge of the applicant's engineering specialty to be
able to make knowledgeable comments about the applicant's
performance on the job.
For an applicant verifying experience which has occurred in another state,
and where the applicant's experience did not fall under any of the
exemptions existing in that state, the reference forms must be signed by a
professional engineer authorized to practice in the state where the
experience occurred. Applicants claiming to have worked under an
exemption in another state shall indicate, and provide the basis for that
exemption.
The Board will accept valid references from individuals licensed outside
the U.S. if the applicant has had experience in another country.
Applicants verifying experience in another country should use reference
persons who are authorized to practice in that country.
b.
GEOTECHNICAL ENGINEER
For a geotechnical engineer applicant, a satisfactory reference is one that
contains a positive response from the reference person, is completed by a
person who is not a relative of the applicant, is completed fully and signed by
both the applicant and reference, and meets the additional requirements
indicated herein. A " No" or " Don't know" response to the question, " Do you
consider the applicant technically qualified to be licensed as a
Geotechnical Engineer?" is not considered a positive response from a
reference when the application is evaluated, and will result in that reference
being considered as unsatisfactory. References from persons licensed as
civil engineers in another state may be offered in addition to the required
California civil engineer references, to supplement the applicant's experience
verification.
The Board will accept valid references from individuals licensed outside the U.S.
if the applicant has had experience in another country. Applicants verifying
experience in another country should use reference persons who are authorized
to practice in that country.
c.
STRUCTURAL ENGINEER
For a structural engineer applicant, a satisfactory reference is one from a person
who holds the structural authority in California or in a state that has a structural
engineering comity agreement with California, is one that contains a positive
response from the reference person, is completed by a person who is not a
relative of the applicant, is completed fully and signed by both the applicant and
reference, and meets the additional requirements indicated herein. An " I don't
know" response from a reference to the question, " Do you consider the
41
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
applicant technically qualified to be licensed as a Structural Engineer?" is

not considered a positive response when the application is evaluated, and
will result in that reference being considered as unsatisfactory. If the
applicant does not know or has not worked with sufficient licensed structural
engineers to be able to procure the minimum number of appropriate references,
the applicant should review the "Important Notice" instructions that come with
structural engineer application package, and if necessary, contact the Board for
instructions on how to obtain the required references. In no case will references
from persons licensed as civil or structural engineers in another country, in states
without comity agreements, or from persons who are licensed only as civil
engineers in California, be accepted in lieu of the minimum of three references
from appropriately licensed structural engineers. Such references may be
offered in addition to the required references, however, to supplement the
applicant's experience verification.
The Board will accept valid references from individuals licensed outside the U.S.
if the applicant has had experience in another country. However, such
references would be considered to be supplementary, and would have to be in
addition to the three references from California or from Structural Engineers from
states that have comity agreements with California.
In addition to whichever of the above apply, to be satisfactory, a reference person must
also be able to indicate that his or her evaluation of the applicant is based upon personal
knowledge, either gained by direct association in the work environment or by a review of
sufficient and diverse work samples and an interview of the applicant. It is the
applicants' responsibility to demonstrate their qualifications to the person who will be
completing the reference form. Toward that end, in general the Board considers
references in the following descending order of preference:
(1)
(2)
(3)
(4)
(5)
immediate supervisors
indirect supervisors
coworkers at equal or higher level
co-workers not closely associated with the applicant
clients/others
In the case of an applicant whose experience appears to be marginal, or where there is

a conflict between reference evaluations of the applicant, more weight will be given to
reference sources who were in the best position to have personal knowledge of the
applicant's qualifying experience (i.e., immediate supervisor, etc.).
42
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
27
What are the application fees for the various branches of
engineering, and how should they be transmitted to the Board?
a.
As of May 2, 2012, the following are the fees for certification or licensure:
(1)
Certification as an Engineer-in-Training
$50.00
(2)
Licensure as a Professional Engineer
$125.00
(3)
Authority to use the title "Geotechnical Engineer"
$125.00
(4)
Authority to use the title "Structural Engineer"
$125.00
Current fee information is always available on the Boards website and should be
verified by the applicant before the application is submitted. Submittal of an
incorrect fee will delay the processing of the application.
b.
All fees shall be transmitted by personal check, bank draft, or money order made
payable to the Department of Consumer Affairs. If an applicant's check is
returned because of insufficient funds, processing of the application will cease
until and unless a valid replacement (e.g. cashiers check or money order) is
received, and this may cause an applicant to miss the examination for which he
or she applied.
c.
Fees and applications transmitted through the United States mail shall be
deemed to have been filed no earlier than the date shown by the post office
cancellation mark unless the applicant can provide satisfactory proof that the
documents were mailed on an earlier date.
43
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
28
If an applicant has special needs or requirements due to physical
or mental disabilities, or religious beliefs, may the applicant
request special treatment?
Yes. An applicant may request that special arrangements to deal with his or her specific needs.
a.
Special Accommodations under the ADA

If an applicant requires special testing accommodations for reasons falling within
the ADA, he or she must complete the Questionnaire for Applicants Requesting
Special Accommodations, which is available on the Boards website, and submit
the form to NCEES. In order to receive special accommodations, this form must
be completed and returned, along with the required supporting documentation, to
NCEES by the final filing date of the examination for which the applicant is
applying. Neither the form nor the supporting documentation is to be submitted
to the Board. Applicants must request special accommodations for each
examination administration cycle, even if none of the information has changed
since the last request.
b.
Religious Accommodations
If an applicant is unable to attend the examination on the set date due to his or
her religious beliefs, he or she must complete the Religious Accommodations
Request Form, which is available on the Boards website. In order to receive
accommodations, this form must be completed and returned, along with the
required supporting documentation, to NCEES by the final filing date of the
examination for which the applicant is applying. Neither the form nor the
supporting documentation is to be submitted to the Board. Applicants must
request special accommodations for each examination administration cycle, even
if none of the information has changed since the last request.
44
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
29
When must applications be postmarked and when are
examinations given in each branch of engineering?
The final filing dates and the examination dates are available on the Boards website.
45
FREQU EN T L Y A SK ED QU EST I ON S
30
What happens if the Board finds that an
applicant is not qualified for licensing or
certification?
The Board will notify the applicant by letter that the application was not approved. Applications
will be retained for two years.
If the applicant files again within the two-year period, the references, transcripts, and other
information submitted with the first application may still be used with the new application.
However, if the applicant files after the two-year period, all information, including references and
transcripts, must be submitted again. The applicant is still considered a NEW APPLICANT
and must use the appropriate deadlines listed on the Boards website for new applicants.
Application fees are not refundable and are expended by the processing and evaluation of each
application submitted. The Board will refund any state exam fees if paid by the applicant.
46
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
31
May an applicant appeal if he or she is found not qualified to take
the examination?
Yes. The applicant's appeal must be presented in writing to the Executive Officer within 60
days of the postmark on the denial letter and shall state reasons for the appeal. An appeal shall
be supported by additional evidence, more references, affidavits and supplemental information
such that the Board may be better informed of the applicants qualifications. Appeals should
include a list of all documents submitted or to be submitted on the applicants behalf. If an
appeal is submitted within the specified time period but is granted too late for a particular exam,
the applicant will be set for the next following exam in the branch for which the applicant has
applied. Again, the best way to avoid this situation is to make sure that the application is
complete and that all the requirements have been met before filing. If the application has been
denied, the applicant has the right to a hearing under the Administrative Procedure Act
(Government Code Section 11500 et seq.) upon submittal of a written request for such a
hearing within 60 days after the postmark date of the appeal denial notice.
47
FREQU EN T L Y A SK ED QU EST I ON S
32
How long before the examination will an
applicant know if he or she is authorized to take
it?
Applicants will be notified of an approved application via postcard from the Board; typically, one
to three months after the application is submitted.
It is the Boards intent to notify you of an approved application prior to the closing of NCEES
registration for any NCEES exams. NCEES will send an exam authorization notice via e-mail
two weeks prior to the examination date.
It is the Boards intent to notify you of an approved application prior to the closing of the Boards
CBT exam registration for any California Board state specific exams. Notification to register
with the CBT vendor will come via e-mail 5-6 weeks prior to the exam date.
48
F R E Q U E N T L Y
A S K E D
Q U E S T I O N S
33
What happens if, after an applicant applies for the examination
and has been approved for the exam, he or she finds that they
are unable to appear for the examination as scheduled?
Effective with the October examinationsIf you are requesting a postponement for an
examination, please be aware that postponement requests will only be accepted for the:
.California Traffic Engineering Exam
.California Seismic 3 rinciples Exam
.California Engineering Surveying Exam
3 ostponement requests will not be considered without supporting documentation. To be
considered, postponement requests must be postmarked no later than ten ) business
days after the examinations) you are requesting to postpone.
ostponement requests will not be processed for any NCEES exam or the California Geotechnical exam.
49
34
What constitutes an abandoned application?
In the absence of special circumstances, any of the following actions by an applicant shall be
considered abandonment of the application and shall result in cancellation of the application with
no refund of the filing fee.
a.
Failure to provide additional information within 90 days following the mailing of a

request by the Board's staff;
b.
Failure to complete the examination within two years from the date of filing the
application;
c.
Failure to appear for examination at the designated time and place without
obtaining a postponement or after having obtained two postponements. (See
Question 33.)
50
35
If an applicant fails an examination, how does he or she apply to
take it again?
In order to take the exam the next time it is offered, the applicant must return his or her result
letter/refile form to the Board by the refile final filing date that is printed on the form with the
required application fee.
51
36
May an applicant inspect his or her graded examination?
An applicant can inspect only the design/essay problems only for the purpose of appealing
failing results. See Question 37.
52
37
May an applicant inspect his or her graded multiple choice exam
papers?
No. Multiple choice machine-gradable test questions are not open to review because multiple
choice exams are not appealable.
53

Frequently Asked Questions Regarding Engineering Certification/Licensure Requirements

Uploaded by

Copyright:

Available Formats

Frequently Asked Questions Regarding Engineering Certification/Licensure Requirements

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Frequently Asked Questions Regarding Engineering Certification/Licensure Requirements

Uploaded by

Copyright:

Available Formats

CALIFORNIA DEPARTMENT OF CONSUMER AFFAIRS

Board for Professional Engineers, Land

Board Approved Engineering Degree (ABET)

Board Approved Engineering Technology Degree (ABET)

Non-Board Approved Engineering Degree

Board Approved Doctorate in Engineering

1. A person holding an earned doctorate in engineering from an ABET accredited program

B. For persons seeking a civil engineering license:

Two years credit for graduation with a bachelor's level engineering

The Board may at its discretion give credit as qualifying experience of up

done in any non-ABET approved curriculum. Completed post-graduate work is

Engineering Work Experience

planning concepts. However, `supervision of the construction of

Have a valid, unexpired license as a Civil Engineer in California.

Has actually practiced in responsible charge in another state (licensure in

Has practiced in responsible charge in another country.

Common Construction Materials - Steel, Concrete, Wood and Masonry: Be

Determination of Lateral Forces - Have expertise regarding structural design to

Selection of Framing Systems - Have expertise regarding the selection of framing

Selection of Foundation Systems - Have experience in the selection of

Application of Code Requirements - Be knowledgeable of all applicable local,

Multi-story Buildings or Equivalent Multi-level Structures - Have experience with

Have a valid, unexpired license as a Civil Engineer in California.

Take and pass the eight-hour written California geotechnical engineering

Development of programs of geotechnical investigation which includes, but is not

Communication with other design consultants to determine their

Performance of literature searches, site history analyses, etc., related to

Formulation or engineering evaluation of field exploration and laboratory

Preparation or engineering evaluation of proposals.

Performance of geotechnical field and laboratory studies, which includes, but is

Direction and/or modification of field exploration programs, as required

Classification and evaluation of subsurface conditions.

Understanding the purposes for and being qualified to perform routine

soil collapse potential

Analysis of geotechnical data and engineering computations which includes, but

Analysis of field and laboratory test results regarding:

Performance of computations using test results and available data

Performance or engineering evaluation of construction, post-construction and site

Performance or supervision of geotechnical testing and observation of

Analysis, design and evaluation of instrumentation programs to evaluate

Geotechnical observation during construction and/or installation, including

Engineering evaluation of soil-related distress.

Preparation or engineering evaluation of geotechnical reports which includes, but

Preparation of appropriate plans, logs, test results and other exhibits;

Documentation testing and observation;

Preparation of written reports which present findings, conclusions and

Preparation of specifications and guidelines for achieving the intent of

Provide evidence of having passed an eight-hour, written EIT/FE examination or

Provide evidence of having gained licensure in another state by passing an

Enclose a check or money order for the application fee.

Pass a take-home written test on California engineering laws and rules. In

Allow approximately three months for processing.

To obtain comity in structural engineering, an applicant must first become

An official transcript of the applicant's grades and degrees

For work experience credit, including teaching:

The typed summary of the applicant's experience as contained in

The summary of the applicants experience should include the

Tasks or activities the applicant has participated in; e.g.,