Scribd
Upload
686 views

Noise Models in Image Processing

The document discusses various types of noise models used in image processing. It describes noise that arises during image acquisition from sensor and environmental factors, as well as transmission-related noise. The major types of noise covered are uniform, Gaussian, salt and pepper, Rayleigh, and gamma noise. Uniform noise results from pixel quantization and has a uniform distribution. Gaussian noise has a normal distribution and is a component of sensor read noise. Salt and pepper noise causes isolated white and black pixels due to sensor or transmission faults. Rayleigh and gamma noises are applicable to radar and laser-based images respectively. In conclusion, the document analyzes key noise models and their sources that degrade digital images.

Uploaded by

Chinmay Patil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
686 views

Noise Models in Image Processing

The document discusses various types of noise models used in image processing. It describes noise that arises during image acquisition from sensor and environmental factors, as well as transmission-related noise. The major types of noise covered are uniform, Gaussian, salt and pepper, Rayleigh, and gamma noise. Uniform noise results from pixel quantization and has a uniform distribution. Gaussian noise has a normal distribution and is a component of sensor read noise. Salt and pepper noise causes isolated white and black pixels due to sensor or transmission faults. Rayleigh and gamma noises are applicable to radar and laser-based images respectively. In conclusion, the document analyzes key noise models and their sources that degrade digital images.

Uploaded by

Chinmay Patil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

AIM: STUDY OF NOISE MODELS IN IMAGE PROCESSING

INTRODUCTION:
The main source of noise in digital images arises during image acquisition
(digitization) or during image transmission. The performance of image sensor is affected by
variety of reasons such as environmental condition during image acquisition or by the quality
of the sensing element themselves. For instance, during acquiring images with CCD camera,
sensor temperature and light levels are major factors that affecting the amount of noise in the
image after the resulting. Images are corrupted while during transmission of images. The
principal reason of noise is due to interfering in the channel which is used for the images
transmission .
Image noise can be classified as Impulse noise (Salt-and-pepper noise), Amplifier
noise (Gaussian noise), Shot noise, Quantization noise (uniform noise), Film grain, onisotropic noise, Multiplicative noise (Speckle noise) and Periodic noise. We can model a
noisy image as follows:

Where A(x ,y) is the original image pixel value and B(x ,y) is the noise in the image and C(x
,y) is the resulting noise image.

UNIFORM NOISE:
The uniform noise cause by quantizing the pixels of image to a number of distinct
levels is known as quantization noise. It has approximately uniform distribution. In the
uniform noise the level of the gray values of the noise are uniformly distributed across a

specified range. Uniform noise can be used to generate any different type of noise
distribution. This noise is often used to degrade images for the evaluation of image
restoration algorithms. This noise provides the most neutral or unbiased noise.

Figure. 1.6 PDF, mean, variance of uniform noise

GAUSSIAN NOISE OR AMPLIFIER NOISE:


This noise has a probability density function of the normal distribution. It is also
known as Gaussian distribution. It is a major part of the read noise of an image sensor that is
of the constant level of noise in the dark areas of the image.

SALT AND PEPPER NOISE:


The salt-and-pepper noise are also called shot noise, impulse noise or spike noise that
is usually caused by faulty memory locations ,malfunctioning pixel elements in the camera
sensors, or there can be timing errors in the process of digitization .In the salt and pepper
noise there are only two possible values exists that is a and b and the probability of each is
less than 0.2.If the numbers greater than this numbers the noise will swamp out image. For 8bit image the typical value for 255 for salt-noise and pepper noise is 0
Reasons for Salt and Pepper Noise:
a. By memory cell failure.
b. By malfunctioning of cameras sensor cells.
c. By synchronization errors in image digitizing or transmission.

RAYLEIGH NOISE:
Radar range and velocity images typically contain noise that can be modeled by the
Rayleigh distribution.

GAMMA NOISE:
The noise can be obtained by the low-pass filtering of laser based images

CONCLUSION:
The noise models studied are Uniform , Gaussian, Rayleigh, Salt & pepper, Gamma
have being properly analyzed . Thus we can say that the these are the different types of noise
that creep in images during image acquisition or transmission. Light is also thrown on the
causes of these noises and their major sources.

You might also like