#############################################################################

# This is a sample response file for SAP Adaptive Server Enterprise 16.0 #
#############################################################################
#Validate Response File
#---------------------#
RUN_SILENT=true
#Choose Install Folder
#--------------------# USER_INSTALL_DIR=<Destination directory in absolute path>
#
USER_INSTALL_DIR=/opt/sap
#Install older version
#--------------------# INSTALL_OLDER_VERSION=<true|false>.
#
This determines whether installer can overwrite newer version.
#
INSTALL_OLDER_VERSION=false
#Choose Update Install Option
#---------------------------# DO_UPDATE_INSTALL=<true|false>.
#
Valid in ESD installer, this determines if the installer should only
#
update the existing product/features.
#
DO_UPDATE_INSTALL=false
#Choose Install Set
#-----------------# CHOSEN_INSTALL_SET=<Typical|Full|Custom>
# CHOSEN_FEATURE_LIST=<Features you want to install>
#
Valid values are:
#
----------------#
fase_srv
--> Adaptive Server Enterprise
#
fase_add_lm
--> Additional ASE Language Modules
#
fopen_client
--> Open Client
#
fdblib
--> DB-Library
#
fesql_c_lang
--> Embedded SQL/C
#
fesql_cobol_lang
--> Embedded SQL/Cobol
#
fxa
--> XA Interface Library for ASE Distributed Tra
nsaction Manager
#
Available on:
#
Itanium/HP-UX 64-bit
#
IBM/AIX 64-bit
#
x86-64/Linux 64-bit
#
SPARC/Solaris 64-bit
#
x86-64/Solaris 64-bit
#
x86-64/Windows 32 and 64-bit
#
fconn_add_lm
--> Additional Connectivity Language Modules
#
fjconnect160
--> jConnect 16.0 for JDBC
#
fodbcl
--> ASE ODBC Driver
#
fodata_ase
--> OData Server for ASE
#
Available on:
#
x86-64/Linux 64-bit
#
x86-64/Windows 32 and 64-bit
#
fdbisql
--> Interactive SQL
#
fqptune
--> QPTune

#
fsysam_util
--> SySAM License Utilities
#
fsysam_server
--> SySAM License Server
#
fscc_server
--> SAP Control Center
#
fasemap
--> Management User Interface for Adaptive Serve
r
#
fase_agent
--> Remote Command and Control Agent for Adaptiv
e Server
#
fase_snmp_agent
--> SNMP Support for Adaptive Server
#
fconn_python
--> ASE extension module for Python
#
Available on:
#
Itanium/HP-UX 64-bit
#
IBM/AIX 64-bit
#
IBM pSeries/Linux 64-bit
#
x86-64/Linux 64-bit
#
SPARC/Solaris 64-bit
#
x86-64/Solaris 64-bit
#
x86-64/Windows 64-bit
#
fconn_perl
--> ASE database driver for PERL
#
Available on:
#
x86-64/Linux 64-bit
#
x86-64/Windows 64-bit
#
fconn_php
--> ASE extension module for PHP
#
Available on:
#
Itanium/HP-UX 64-bit
#
IBM/AIX 64-bit
#
IBM pSeries/Linux 64-bit
#
x86-64/Linux 64-bit
#
SPARC/Solaris 64-bit
#
x86-64/Solaris 64-bit
#
x86-64/Windows 64-bit
#
# Notes:
# - If DO_UPDATE_INSTALL=true, CHOSEN_INSTALL_SET and CHOSEN_FEATURE_LIST
# are ignored.
# - If CHOSEN_INSTALL_SET is set to "Typical" or "Full", do not set
# CHOSEN_FEATURE_LIST.
#
# CHOSEN_FEATURE_LIST=fase_srv,fase_add_lm,fopen_client,fdblib,fesql_c_lang,fxa,
fodbcl,fconn_add_lm,fjconnect160,fdbisql,fqptune,fsysam_util,fscc_server,fase_ag
ent,fase_snmp_agent,fsysam_server
CHOSEN_INSTALL_SET=Typical
#Choose Product License Type
#--------------------------# SYBASE_PRODUCT_LICENSE_TYPE=<license|developer|evaluate|express>
#
This is the End User License Agreement (EULA) you agreed to when run
#
installer with "-DAGREE_TO_SYBASE_LICENSE=true" argument.
#
# Note:
# - 'developer', 'evaluate' and 'express' are not available on all platforms.
#
SYBASE_PRODUCT_LICENSE_TYPE=license
#Choose Sybase Software Asset Management License
#----------------------------------------------# SYSAM_LICENSE_SOURCE=<license_file|existing_license_server|proceed_without_lic
ense>
# SYSAM_LICENSE_FILE_PATHNAME=<license key file path>
#
Required when SYSAM_LICENSE_SOURCE is set to 'license_file'.
# SYSAM_EXISTING_LICENSE_SERVER_HOSTNAME=<license key server name>

#
Required when SYSAM_LICENSE_SOURCE is set to 'existing_license_server'.
# SYSAM_EXISTING_LICENSE_SERVER_PORTNUMBER=<license key server port number>
#
Set this to null for default port number.
#
SYSAM_LICENSE_SOURCE=proceed_without_license
SYSAM_LICENSE_FILE_PATHNAME=
SYSAM_EXISTING_LICENSE_SERVER_HOSTNAME=
SYSAM_EXISTING_LICENSE_SERVER_PORTNUMBER=
#Choose SYSAM Product Edtion and License Type
#-------------------------------------------# SYSAM_PRODUCT_EDITION=<Enterprise Edition|Developer Edition|Small Business Edi
tion|Unknown>
# SYSAM_LICENSE_TYPE=<License type>
#
Valid SYSAM_LICENSE_TYPE value for SYSAM_PRODUCT_EDITION='Enterprise Edi
tion':
#
CP : CPU License
#
SF : Standby CPU License
#
SR : Server License
#
SV : Standby Server License
#
DT : Development and Test License
#
EV : Evaluation License
#
OT : Other License
#
SS : Standalone Seat License
#
DV : Developer License
#
NA : Not Applicable or Other License
#
AC : OEM Application Deployment CPU License
#
BC : OEM Application Deployment Standby CPU License
#
AR : OEM Application Deployment Server License
#
BR : OEM Application Deployment Standby Server License
#
AO : OEM Application Deployment Other License
#
LP : Application Specific CPU License
#
LF : Application Specific Standby CPU License
#
LR : Application Specific Server License
#
LV : Application Specific Standby Server License
#
Unknown
#
Valid SYSAM_LICENSE_TYPE value for SYSAM_PRODUCT_EDITION='Small Business
Edition':
#
CP : CPU License
#
SF : Standby CPU License
#
SR : Server License
#
SV : Standby Server License
#
DT : Development and Test License
#
EV : Evaluation License
#
OT : Other License
#
SS : Standalone Seat License
#
DV : Developer License
#
NA : Not Applicable or Other License
#
AC : OEM Application Deployment CPU License
#
BC : OEM Application Deployment Standby CPU License
#
AR : OEM Application Deployment Server License
#
BR : OEM Application Deployment Standby Server License
#
AO : OEM Application Deployment Other License
#
LP : Application Specific CPU License
#
LF : Application Specific Standby CPU License
#
LR : Application Specific Server License
#
LV : Application Specific Standby Server License
#
DH : Development and Testing Chip License
#
CH : Chip License
#
SH : Standby Chip License

#
AH : Application Deployment Chip License
#
BH : Application Deployment Standby Chip License
#
LH : Application Specific Chip License
#
LI : Application Specific Standby Chip License
#
Unknown
#
Valid SYSAM_LICENSE_TYPE value for SYSAM_PRODUCT_EDITION='Developer Edit
ion' or SYSAM_PRODUCT_EDITION=Unknown
#
None
#
SYSAM_PRODUCT_EDITION=Enterprise Edition
SYSAM_LICENSE_TYPE=CP : CPU License
#Software Asset Management Notification Setting
#---------------------------------------------# SYSAM_NOTIFICATION_ENABLE=<true|false>
#
Enable SySAM email notification
# SYSAM_NOTIFICATION_SMTP_HOSTNAME=<SMTP server host name>
#
Required if SYSAM_NOTIFICATION_ENABLE=true
# SYSAM_NOTIFICATION_SMTP_PORTNUMBER=<SMTP server port number>
#
Required if SYSAM_NOTIFICATION_ENABLE=true
# SYSAM_NOTIFICATION_SENDER_EMAIL=<Sender email>
#
Required if SYSAM_NOTIFICATION_ENABLE=true
# SYSAM_NOTIFICATION_RECIPIENT_EMAIL=<Recipient emails>
#
Required if SYSAM_NOTIFICATION_ENABLE=true
# SYSAM_NOTIFICATION_EMAIL_SEVERITY=<INFORMATIONAL|WARNING|ERROR>
#
Required if SYSAM_NOTIFICATION_ENABLE=true
#
SYSAM_NOTIFICATION_ENABLE=true
SYSAM_NOTIFICATION_SMTP_HOSTNAME=smtp
SYSAM_NOTIFICATION_SMTP_PORTNUMBER=25
SYSAM_NOTIFICATION_SENDER_EMAIL=sybase
[email protected]
SYSAM_NOTIFICATION_EMAIL_SEVERITY=WARNING
#Choose Update Adaptive Server
#----------------------------# DO_UPDATE_ASE_SERVER=<true|false>
#
This property determines whether to update the existing Adaptive Servers
.
#
It is only valid if you install the ESD over GA or later release directo
ry.
# UPDATE_ASE_SERVER_NAME_[n]=<Adaptive Server name to update>
# UPDATE_ASE_PASSWORD_[n]=<Adaptive Server SA password>
#
# Notes:
# - You also can set UPDATE_ASE_SERVER_NAME_[n] and UPDATE_ASE_PASSWORD_[n]
# property values through the environment variables UPDATE_ASE_SERVER_NAME_[n]
# and UPDATE_ASE_PASSWORD_[n], respectively.
# - If the ASE password is null, set UPDATE_ASE_SERVER_NAME_[n] value to "NA".
#
DO_UPDATE_ASE_SERVER=false
UPDATE_ASE_SERVER_NAME_1=SYBASE1
UPDATE_ASE_PASSWORD_1=NA
UPDATE_ASE_SERVER_NAME_2=SYBASE2
UPDATE_ASE_PASSWORD_2=NA
#Configure New Servers
#--------------------# SY_CONFIG_ASE_SERVER=<true|false>
#
This property determines whether to configure Adaptive Server.

# SY_CONFIG_BS_SERVER=<true|false>
#
This property determines whether to configure Backup Server.
# SY_CONFIG_XP_SERVER=<true|false>
#
This property determines whether to configure XP Server.
# SY_CONFIG_JS_SERVER=<true|false>
#
This property determines whether to configure Job Scheduler Agent.
# SY_CONFIG_SM_SERVER=<true|false>
#
This property determines whether to enable Self Management.
# SY_CONFIG_SCC_SERVER=<true|false>
#
This property determines whether to configure SAP Control Center.
#
# Notes:
# - These properties are ignored if you install the ESD over GA or later
# release directory. See above for updating the existing ASE servers.
# - If SY_CONFIG_BS_SERVER, SY_CONFIG_XP_SERVER, and/or SY_CONFIG_JS_SERVER,
# are set to "true", SY_CONFIG_ASE_SERVER must also set to "true".
# - If SY_CONFIG_SM_SERVER=true, SY_CONFIG_JS_SERVER must also set to "true".
#
SY_CONFIG_ASE_SERVER=true
SY_CONFIG_BS_SERVER=true
SY_CONFIG_XP_SERVER=true
SY_CONFIG_JS_SERVER=true
SY_CONFIG_SM_SERVER=true
SY_CONFIG_SCC_SERVER=true
#Configure with Different User Account
#------------------------------------# If SY_CFG_USER_ACCOUNT_CHANGE=yes, below properties are required:
#
# SY_CFG_USER_ACCOUNT_NAME=<user name>
# SY_CFG_USER_ACCOUNT_PASSWORD=<user password>
#
SY_CFG_USER_ACCOUNT_CHANGE=<yes|no>
SY_CFG_USER_ACCOUNT_NAME=<user name>
SY_CFG_USER_ACCOUNT_PASSWORD=<user password>
#User Configuration Data Directory
#--------------------------------SY_CFG_USER_DATA_DIRECTORY=<data directory>
#Configure New Adaptive Server
#----------------------------# If SY_CONFIG_ASE_SERVER=true, below properties are required:
#
# SY_CFG_ASE_SERVER_NAME=<Adaptive Server name>
# SY_CFG_ASE_PORT_NUMBER=<Adaptive Server port number>
# SY_CFG_ASE_APPL_TYPE=<MIXED|OLTP|DSS>
#
This property describes the intended use of the ASE server:
#
OLTP
--> Online Transaction Proccessing
#
DSS
--> Decision Support Systems
#
Mixed --> OLTP/DSS
# SY_CFG_ASE_PAGESIZE=<2k|4k|8k|16k>
#
Adaptive Server page size
# ASE_ADDL_CMD_ARG=<Additional command line arguments to ASE>
# SY_CFG_ASE_PASSWORD=<SA's password>
# SY_CFG_ASE_MASTER_DEV_NAME=<Master device name>
# SY_CFG_ASE_MASTER_DEV_SIZE=<Master device size in MB>
# SY_CFG_ASE_MASTER_DB_SIZE=<Master database size in MB>
# SY_CFG_ASE_SYBPROC_DEV_NAME=<System procedure device name>
# SY_CFG_ASE_SYBPROC_DEV_SIZE=<System procedure device size in MB>

# SY_CFG_ASE_SYBPROC_DB_SIZE=<System procedure database size in MB>

# SY_CFG_ASE_SYBTEMP_DEV_NAME=<System device name for two phase commit>
# SY_CFG_ASE_SYBTEMP_DEV_SIZE=<System device size in MB>
# SY_CFG_ASE_SYBTEMP_DB_SIZE=<System database size in MB>
# SY_CFG_ASE_ERROR_LOG=<Error log>
# SY_CFG_ASE_PCI_ENABLE=<true|false>
#
This property determines if Java in database feature is enabled.
# SY_CFG_ASE_PCI_DEV_NAME=<Device name for "sybpcidb" database>
#
Required if SY_CFG_ASE_PCI_ENABLE=true
# SY_CFG_ASE_PCI_DEV_SIZE=<PCI device size in MB>
#
Required if SY_CFG_ASE_PCI_ENABLE=true
# SY_CFG_ASE_PCI_DB_SIZE=<PCI database size in MB>
#
Required if SY_CFG_ASE_PCI_ENABLE=true
# SY_CFG_ASE_TEMP_DEV_NAME=<Device for temporary database>
# SY_CFG_ASE_TEMP_DEV_SIZE=<Temporary device size in MB>
# SY_CFG_ASE_TEMP_DB_SIZE=<Temporary database size in MB>
# SY_CFG_ASE_OPT_ENABLE=<true|false>
#
This property determines if it should optimized the Adaptive Server.
# SY_CFG_ASE_CPU_NUMBER=<Available physical memory for ASE in MB>
#
Required if SY_CFG_ASE_OPT_ENABLE=true
# SY_CFG_ASE_MEMORY=<Available number of CPU for ASE>
#
Required if SY_CFG_ASE_OPT_ENABLE=true
# SY_CFG_ASE_LANG=<Default language in ASE>
#
Set this to null to use default language.
# SY_CFG_ASE_CHARSET=<Default character set in ASE>
#
Set this to null to use default character set.
# SY_CFG_ASE_SORTORDER=<Default sort order in ASE>
#
Set this to null to use default sort order.
# SY_CFG_ASE_SAMPLE_DB=<true|false>
#
Determines whether to create pubs2 and pubs3 sample databases.
#
SY_CFG_ASE_SERVER_NAME=SYBASE
SY_CFG_ASE_PORT_NUMBER=5000
SY_CFG_ASE_APPL_TYPE=MIXED
SY_CFG_ASE_PAGESIZE=4k
ASE_ADDL_CMD_ARG=
SY_CFG_ASE_PASSWORD=sybase
SY_CFG_ASE_MASTER_DEV_NAME=/opt/sap/data/master.dat
SY_CFG_ASE_MASTER_DEV_SIZE=52
SY_CFG_ASE_MASTER_DB_SIZE=26
SY_CFG_ASE_SYBPROC_DEV_NAME=/opt/sap/data/sysprocs.dat
SY_CFG_ASE_SYBPROC_DEV_SIZE=196
SY_CFG_ASE_SYBPROC_DB_SIZE=196
SY_CFG_ASE_SYBTEMP_DEV_NAME=/opt/sap/data/sybsysdb.dat
SY_CFG_ASE_SYBTEMP_DEV_SIZE=6
SY_CFG_ASE_SYBTEMP_DB_SIZE=6
SY_CFG_ASE_ERROR_LOG=/opt/sap/ASE-16_0/install/SYBASE.log
SY_CFG_ASE_PCI_ENABLE=false
SY_CFG_ASE_PCI_DEV_NAME=
SY_CFG_ASE_PCI_DEV_SIZE=
SY_CFG_ASE_PCI_DB_SIZE=
SY_CFG_ASE_TEMP_DEV_NAME=/opt/sap/data/tempdbdev.dat
SY_CFG_ASE_TEMP_DEV_SIZE=100
SY_CFG_ASE_TEMP_DB_SIZE=100
SY_CFG_ASE_OPT_ENABLE=false
SY_CFG_ASE_CPU_NUMBER=
SY_CFG_ASE_MEMORY=
SY_CFG_ASE_LANG=
SY_CFG_ASE_CHARSET=
SY_CFG_ASE_SORTORDER=

SY_CFG_ASE_SAMPLE_DB=false
#Configure New Backup Server
#--------------------------# If SY_CONFIG_BS_SERVER=true, below properties are required:
#
# SY_CFG_BS_SERVER_NAME=<Backup Server name>
# SY_CFG_BS_PORT_NUMBER=<Backup Server port number>
# SY_CFG_BS_ERROR_LOG=<Backup Server error log>
# SY_CFG_BS_ALLOW_HOSTS=<Comma separated list of hosts allow to connect to this
Backup Server>
# BS_ADDL_CMD_ARG=<Additional command line arguments to Backup Server>
#
SY_CFG_BS_SERVER_NAME=SYBASE_BS
SY_CFG_BS_PORT_NUMBER=5001
SY_CFG_BS_ERROR_LOG=/opt/sap/ASE-16_0/install/SYBASE_BS.log
SY_CFG_BS_ALLOW_HOSTS=fireball, smmdi.sybase.com, 192.168.1.112
BS_ADDL_CMD_ARG=
#Configure New XP Server
#----------------------# If SY_CONFIG_XP_SERVER=true, below properties are required:
#
# SY_CFG_XP_SERVER_NAME=<XP Server name>
#
The name must be "<ASE server name (SY_CFG_ASE_SERVER_NAME) in uppercase
>_XP" format.
# SY_CFG_XP_PORT_NUMBER=<XP Server port number>
# SY_CFG_XP_ERROR_LOG=<XP Server error log>
#
SY_CFG_XP_SERVER_NAME=SYBASE_XP
SY_CFG_XP_PORT_NUMBER=5003
SY_CFG_XP_ERROR_LOG=/opt/sap/ASE-16_0/install/SYBASE_XP.log
#Configure New Job Scheduler
#--------------------------# If SY_CONFIG_JS_SERVER=true, below properties are required:
#
# SY_CFG_JS_SERVER_NAME=<Job Scheduler Agent name>
# SY_CFG_JS_PORT_NUMBER=<Job Scheduler Agent port number>
# SY_CFG_JS_MANAG_DEV_NAME=<Adaptive Server management device name>
# SY_CFG_JS_MANAG_DEV_SIZE=<Adaptive Server management device size in MB>
# SY_CFG_JS_MANAG_DB_SIZE=<Adaptive Server management database size in MB>
#
SY_CFG_JS_SERVER_NAME=SYBASE_JS
SY_CFG_JS_PORT_NUMBER=4900
SY_CFG_JS_MANAG_DEV_NAME=/opt/sap/data/sybmgmtdb.dat
SY_CFG_JS_MANAG_DEV_SIZE=76
SY_CFG_JS_MANAG_DB_SIZE=76
#Configure Self Management
#------------------------# If SY_CONFIG_SM_SERVER=true, below properties are required:
#
# SY_CFG_SM_USER_NAME=<Self Management user name>
# SY_CFG_SM_PASSWORD=<Self Management user password>
#
SY_CFG_SM_USER_NAME=sa
SY_CFG_SM_PASSWORD=sybase
#SAP Control Center - Self Discovery Service Adaptor

#---------------------------------------------# If SY_CONFIG_SCC_SERVER=true, below properties are required:

#
# SCC_SELFDISCOVERY_CONFIG_UDP_ADAPTOR=<true|false>
#
This property determines whether to configure UDP adaptor.
# SCC_SELFDISCOVERY_CONFIG_JINI_ADAPTOR=<true|false>
#
This property determines whether to configure JINI adaptor.
# SCC_SELFDISCOVERY_JINI_HOST_NAME=<JINI host name>
#
Required if SCC_SELFDISCOVERY_CONFIG_JINI_ADAPTOR=true
# SCC_SELFDISCOVERY_JINI_PORT_NUMBER=<JINI port number>
#
Required if SCC_SELFDISCOVERY_CONFIG_JINI_ADAPTOR=true
# SCC_SELFDISCOVERY_JINI_HEART_BEAT_PERIOD=<JINI heart beat period in seconds>
#
Required when SCC_SELFDISCOVERY_CONFIG_JINI_ADAPTOR=true
#
SCC_SELFDISCOVERY_CONFIG_UDP_ADAPTOR=true
SCC_SELFDISCOVERY_CONFIG_JINI_ADAPTOR=false
SCC_SELFDISCOVERY_JINI_HOST_NAME=localhost
SCC_SELFDISCOVERY_JINI_PORT_NUMBER=4160
SCC_SELFDISCOVERY_JINI_HEART_BEAT_PERIOD=900
#SAP Control Center Service
#----------------------------# CONFIG_SCC_HTTP_PORT=<http port number for SAP Control Center>
# CONFIG_SCC_HTTPS_PORT=<https port number for SAP Control Center>
CONFIG_SCC_HTTP_PORT=8282
CONFIG_SCC_HTTPS_PORT=8283
#RMI Service
#----------# SCC_RMI_PORT_NUMBER==<https port number for RMI>
SCC_RMI_PORT_NUMBER=9999
#Security Login Modules
#---------------------# CONFIG_SCC_CSI_SCCADMIN_USER=<SCC administrator username>
# CONFIG_SCC_CSI_SCCADMIN_PWD=<SCC administrator password>
# CONFIG_SCC_CSI_UAFADMIN_USER=<SCC agent administrator username>
# CONFIG_SCC_CSI_UAFADMIN_PWD=<SCC agent administrator password>
#
# Notes: You also can set these property values through the
# environment variables:
#
CONFIG_SCC_CSI_SCCADMIN_USER
#
CONFIG_SCC_CSI_SCCADMIN_PWD
#
CONFIG_SCC_CSI_UAFADMIN_USER
#
CONFIG_SCC_CSI_UAFADMIN_PWD
CONFIG_SCC_CSI_SCCADMIN_USER=sccadmin
CONFIG_SCC_CSI_SCCADMIN_PWD=sybase
CONFIG_SCC_CSI_UAFADMIN_USER=uafadmin
CONFIG_SCC_CSI_UAFADMIN_PWD=sybase
#Configure SCC Repository Password
#--------------------------------# Notes: You also can set this property though
#
CONFIG_SCC_REPOSITORY_PWD environment
#
variable.
CONFIG_SCC_REPOSITORY_PWD=sybase
#Enable SCC Shared Disk
#---------------------# SCC Shared Disk mode allows user to run multiple SCC server

# and/or agent processes across one or more host computers.

ENABLE_SCC_SHARED_DISK=false
#SCC Instance Name
#----------------# Specify a SCC instance name to create.
# Only valid if SCC Shared Disk is enabled and new install.
# Allow characters are: [a-z], [A-Z], [0-9], ., _, and -.
# If value is not specified, host name will be used.
CREATE_SCC_INSTANCE_NAME=
#Refresh SCC Instance Type
#------------------------# Select the existing SCC instance type you would like to refresh:
# Only valid if SCC Shared Disk is enabled.
#
# Do not refresh instances
= NONE
# Refresh agent instances
= AGENT
REFRESH_SCC_INSTANCE_TYPE=AGENT
# SAP Control Center Service Setup
#
# INSTALL_SCC_SERVICE=<TRUE|FALSE>
INSTALL_SCC_SERVICE=TRUE