Petroleum Engine Caterpillar Engine Specifications: V-8, 4-Stroke-Cycle Diesel

3508 B
746 bkW / 1000 bhp

1800 rpm
Petroleum Engine
CATERPILLAR ENGINE
SPECIFICATIONS
V-8, 4-Stroke-Cycle Diesel
Bore....................................................... 170.0 mm (6.69 in)
Stroke.................................................... 190.0 mm (7.48 in)
Displacement..................................... 34.53 L (2,107.15 in3)
Aspiration..........................................Turbocharged / SCAC
Compression Ratio.................................................... 14.0:1
Rotation (from flywheel end).................... Counterclockwise
Capacity for Liquids
Cooling System.....................................102.7 L (27.1 gal)
Lube Oil System (refill)......................... 102.0 L (26.9 gal)
Engine Weight, Net Dry (approximate).. 4,309 kg (9,500 lb)
Image shown may not reflect
actual engine
FEATURES
EMISSIONS
Meets Tier 1 emission requirements. Tier 1 refers to
EPA (U.S.) non-road standards.
FULL RANGE OF ATTACHMENTS

Wide range of bolt-on system expansion attachments,
factory designed and tested
SINGLE SOURCE SUPPLIER

Caterpillar:
- Casts engine blocks, heads, cylinder liners, and
flywheel housings
- Machines critical components
- Assembles complete engine
Ownership of these manufacturing processes enables
Caterpillar to produce high quality, dependable product.
UNMATCHED PRODUCT SUPPORT OFFERED

THROUGH WORLDWIDE CATERPILLAR DEALER
NETWORK
More than 1,500 dealer outlets.
Caterpillar factory-trained dealer technicians service
every aspect of your industrial engine.
99.7% of parts orders filled within 24 hours worldwide.
Caterpillar parts and labor warranty
Preventive maintenance agreements available for repair
before failure options.
Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to determine:
- internal engine component condition
- presence of unwanted fluids
- presence of combustion by-products
Factory-designed systems built at Caterpillar ISO

certified facilities
TESTING
Prototype testing on every model:
- proves computer design
- verifies system torsional stability
- functionality tests every model
Every Caterpillar engine is dynamometer tested under
full load to ensure proper engine performance
WEB SITE
For all your industrial power requirements, visit
www.cat-industrial.com.
21 May 2005
6:34 PM
3508 B
Petroleum Engine
746 bkW (1000 bhp)
STANDARD ENGINE EQUIPMENT

Air Inlet System
Separate circuit aftercooler core, corrosion resistant
coated (air side), air cleaner (dual element with service
indicator), Dual rear mounted turbochargers
Lube System
Crankcase breather, top mounted.
Oil cooler, Oil filler and dipstick,RH.
Oil pump, Oil filter, LH, spin-on type.
Front sump oil pan, 250 hour change interval.
Control System
Caterpillar ADEM II Electronic Engine Control, RH,
with electronic unit injector fuel system (10 amp DC
power required to drive electronic engine control
module)
Mounting System
Trunnion front support
Cooling System
Thermostats and housing, Jacket water pump, gear
driven, centrifugal, Connections for radiator cooling
Exhaust System
Exhaust manifold, dry,
Dual turbochargers with watercooled bearings,
Exhaust outlet 203 mm (8 in) round flange
Power Take-Offs
Accessory drive, lower LH, Front housing, two sided
Protection System
ADEM II monitoring system to provide customer
programmable engine.
De-rate strategies to protect against adverse operating
condition.
Emergency stop logic inputs provided at 40-pin
customer interface connection.
Flywheels & Flywheel Housings

General
Flywheel, SAE No. 0, 151 teeth, Flywheel housing, SAE Paint, Caterpillar Yellow,
No. 0, SAE standard rotation
Vibration damper and guard,
Lifting eyes
Fuel System
Note
Fuel filter, LH spin-on type,
Fuel transfer pump,
These engines are not configured properly for
Electronically controlled unit injectors
application in hydraulic excavators or front shovels.
To obtain proper rating and configuration for excavators
and shovels, please contact your Area/District Industrial
Instrumentation
Sales Representative or the 3500 Product Group.
No standard instrumentation, Optional, remote
instrumentation available
21 May 2005
6:34 PM
3508 B
Petroleum Engine
746 bkW (1000 bhp)
PERFORMANCE CURVES
IND - A (Continuous) - DM4634-01
Torque
Nm
Metric
Engine
Power kW
BSFC
g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power

rpm
kW
1800
1700
1600
1500
1450
1400
1350
746
733
712
681
661
636
608
Torque Nm
3958
4120
4249
4338
4353
4337
4302
BSFC g/kW-hr Fuel Rate L/hr

205.1
204.5
206.9
212.5
216
219.3
221.8
182.4
178.7
175.6
172.6
170.2
166.2
160.8
21 May 2005
6:34 PM
3508 B
Petroleum Engine
746 bkW (1000 bhp)
RATINGS AND CONDITIONS

IND - A (Continuous) Continuous heavy duty service
where the engine is operated at maximum power and
speed up to 100% of the time without interruption or
load cycling. Time at full load can be up to 100% of the
duty cycle. Typical service examples are: pumping,
ventilation, customer specs.
Engine Performance Engine performance is corrected

to inlet air standard conditions of 99 KPA (29.31 IN HG)
dry barometer and 25 deg C (77 deg F) temperature.
These values correspond to the standard atmospheric
pressure and temperature as shown in SAE J1995.
Performance measured using a standard fuel with fuel
gravity of 35 degrees API having a lower heating value
of 42,780 KJ/KG (18,390 BTU/LB) when used at 29
DEG (84.2 DEG F) where the density is 838.9 G/L
(7.001 LB/US GAL).
The corrected performance values shown for Caterpillar
engines will approximate the values obtained when the
observed performance data is corrected to SAE J1995,
ISO 3046-2 and 8665 and 2288 and 9249 and 1585,
EEC 80/1269 and DIN 70020 standard reference
conditions.
Engine Dimensions
(1) Length
(2) Width
(3) Height
2136.5 mm
1703.0 mm
1858.4 mm
Performance Number: DM4634-01

Feature Code: 508DO02
Materials and specifications are subject to change without
notice.
4763229
Note: Do not use for installation design. See

general dimension drawings for detail
(Drawing # 2002730 ).
2005 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.

Petroleum Engine Caterpillar Engine Specifications: V-8, 4-Stroke-Cycle Diesel

Uploaded by

Copyright:

Available Formats

Petroleum Engine Caterpillar Engine Specifications: V-8, 4-Stroke-Cycle Diesel

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Petroleum Engine Caterpillar Engine Specifications: V-8, 4-Stroke-Cycle Diesel

Uploaded by

Copyright:

Available Formats

3508 B

746 bkW / 1000 bhp

FULL RANGE OF ATTACHMENTS

SINGLE SOURCE SUPPLIER

UNMATCHED PRODUCT SUPPORT OFFERED

Factory-designed systems built at Caterpillar ISO

STANDARD ENGINE EQUIPMENT

Flywheels & Flywheel Housings

Engine Speed - rpm

Engine Speed Engine Power

BSFC g/kW-hr Fuel Rate L/hr

RATINGS AND CONDITIONS

Engine Performance Engine performance is corrected

Performance Number: DM4634-01

Note: Do not use for installation design. See

You might also like