Scribd
Upload
51 views

Isdn Code

The document provides an overview and definitions for ISDN error codes. It describes local error codes reported by the BinTec router and standard error codes for Euro ISDN (DSS1) and National ISDN (1TR6). The codes are used to identify issues in ISDN calls and are reported in the isdnCallHistoryTable.

Uploaded by

niko67
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
51 views

Isdn Code

The document provides an overview and definitions for ISDN error codes. It describes local error codes reported by the BinTec router and standard error codes for Euro ISDN (DSS1) and National ISDN (1TR6). The codes are used to identify issues in ISDN calls and are reported in the isdnCallHistoryTable.

Uploaded by

niko67
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

ISDN

ERROR CODES
1

August 2000

Software Reference

ISDN Error Codes

ISDN Error Codes

Software Reference

Table of Contents

Table of Contents

ISDN
ERROR CODES
A

REFERENCE

ISDN Error Codes

1.1

Overview

1.2

Local Causes (BinTec router)

1.3

DSS1 Causes (Euro ISDN)

1.4

1TR6 Causes (National ISDN)

Software Reference

15

ISDN Error Codes

Table of Contents

ISDN Error Codes

Software Reference

REFERENCE

Software Reference

ISDN Error Codes

ISDN Error Codes

ISDN Error Codes

1.1

Overview

ISDN errors are reported in the isdnCallHistoryTable. Errors originating from the ISDN are reported in the
DSS1Cause and 1TR6Causefc fields, depending on which
service youre using (Euro ISDN and National ISDN repectively). Errors originating locally on the BinTec router are
reported in the LocalCause field.

ISDN Error Codes

Software Reference

Local Causes (BinTec router)

1.2

Local Causes (BinTec router)

Local causes are reported in the LocalCause field of the isdnCallHistoryTable

Software Reference

0x01:

ipi: Unknown primitive

0x02:

ipi: Outstate
Message has been sent at inappropriate state of call reference.

0x03:

ipi: Mandatory information element (IE) missing

0x04:

ipi: IE not allowed

0x05:

ipi: IL_LOOK

0x06:

ipi: No link or L2 error


ISDN-cable is not connected, or ISDN-connection is not
available or Layer
2 Connection can not be established See isdniftable for
Layer 1 details (Layer1State=F7 means connected i.e.
Layer 1 is available). You may also use the program
bricktrace to display Layer 2 protocol

0x07:

ipi: All call references are used

0x08:

ipi: Provider has not enough memory

0x09:

ipi: Provider is not ready

0x0a:

ipi: Busy
An attempt was made to switch off a busy provider.

0x0b:

ipi: Channel busy

0x0c:

ipi: L3 timer for incoming calls:


The call is received but nobody is responding to this call
(please verify if the
destination address and the LocalNumber of isdndispatchtable are corresponding)

0x0d:

ipi: L3 restart

0x0e:

ipi: L3 error

ISDN Error Codes

ISDN Error Codes

0x0f:

ipi: L1 error

0x10:

no controller available

0x11:

another application got the call

-1:

no information available

ISDN Error Codes

Software Reference

DSS1 Causes (Euro ISDN)

1.3

DSS1 Causes (Euro ISDN)

DSS1 causes are reported in the DSS1Cause field of the isdnCallHistoryTable

Software Reference

0x80:

Normal call clearing


No error occurred.

0x81:

Unallocated (unassigned) number This cause indicates


that the destination, requested by the calling user cannot be reached because, although the number is in a
valid format, it is not currently assigned (allocated).

0x82:

No route to specified transit network


This cause indicates that the equipment sending this
cause has received a request to route the call through a
particular transit network which it does not recognise.
The equipment sending this cause does not recognise
the transit network either, because the transit network
does not exist or because that particular, while it does
exist, does not service the equipment which is sending
this cause.
This cause is supported on a network-dependent basis.

0x83:

No route to destination
This cause indicates that the called user can not be
reached because the network through which the call
has been routed does not serve the destination desired.
This cause is supported on a network-dependent basis.

0x86:

Channel unacceptable
This cause indicates the channel most recently identified
is not acceptable to the sending entity for use in this call.

0x87:

Call awarded & being delivered


This cause indicates that the user has been awarded the
incoming call, and that the incoming call is being connected to a channel already established to that similar
calls (e.g. packet-mode X.25 virtual calls).

0x90:

Normal call clearing


This cause indicates that the call is being cleared be-

ISDN Error Codes

ISDN Error Codes

cause one of the users involved in the call has requested


that the call be cleared.
0x91:

10

ISDN Error Codes

User busy
This cause is used when the called user has indicated
the inability to accept another call.

Software Reference

DSS1 Causes (Euro ISDN)

Software Reference

0x92:

User not responding


This cause is used when a user does not respond to a call
establishment message with either an alerting or connect indication within the prescribed period of time allocated.

0x93:

No answer from user (user alerted)


This cause is used when a user has provided an alerting
indication but has not provided a connect indication
within a prescribed period o f time.

0x95:

Call rejected
This cause indicates that the equipment sending this
cause does not wish to accept this call, although it
could have accepted the call because the equipment
sending this cause is neither busy nor incompatible.

0x96:

Number changed
This cause is returned to a calling user when the called
party number indicated by the calling user is no longer
assigned.

0x9a:

Non-selected user clearing


This cause indicates that the user has not been awarded
the incoming call.

0x9b:

Destination out of order


This cause indicates that the destination indicated by
the user can not be reached because the interface to
the destination is not functioning correctly. The term not
functioning correctly indicates that signalling message
was unable to be delivered to the remote user; e.g. a
physical layer or data link layer failure at the remote user,
user-equipment off-line.

0x9c:

Invalid number format


This cause indicates that the called user can not be
reached because the called party number is not in a
valid format or is not complete.

ISDN Error Codes

11

ISDN Error Codes

0x9d:

Facility rejected
This cause is returned when a facility requested can not
be provided by the network.

0x9e:

Response to STATUS ENQUIRY


This cause included in the STATUS message when the
reason for generating the STATUS message was the prior
receipt of a STATUS ENQUIRY message.

0x9f:

Normal, unspecified
This caused is used to report a normal event only when
no other cause in the normal class applies.

Resource unavailable class

12

0xa2:

No circuit/channel available
This cause indicates that there is no appropriate circuit/
channel presently available to handle the call.

0xa6:

Network out of order


This cause indicates that the network is not functioning
correctly and that the condition is likely to last a relatively long period of time; e.g. immediately reattempting
the call is not likely to be successful.

0xa9:

Temporarily failure
This cause indicates that the network is not functioning
correctly and that the condition is not likely to last a long
period of time; e.g. the user may wish to try another call
attempt almost immediately.

0xaa:

Switching equipment congestion


This cause indicates that the switching equipment generating this cause is experiencing a period of high traffic.

0xab:

Access Information discarded


This cause indicates that the network could not deliver
access information to the remote user as requested. i.e.
a user-to-user information, low layer compatibility, high

ISDN Error Codes

Software Reference

DSS1 Causes (Euro ISDN)

layer compatibility or subaddress as indicated in the diagnostic.

Software Reference

0xac:

Requested circuit/channel not available


This cause is returned when the circuit or channel indicated by the requesting entity cannot be provided by
the other side of the interface.

0xaf:

Resources unavailable, unspecified


This cause is used to report a resource unavailable event
only when no other cause in the resource unavailable
class applies.

ISDN Error Codes

13

ISDN Error Codes

Service/option not available class


0xb1:

Quality of service unavailable


This cause is used to report that the requested quality of
service, as defined in the ITU-T recommendation X.213,
cannot be provided (e.g. throughput or transit delay
cannot be supported).

0xb2:

Requested facility not subscribed


This cause indicates that the requested supplementary
service could not be provided by the network because
the user has not completed the necessary administrative arrangements with its supporting network.

0xb9:

Bearer Capability not authorized


This cause indicates that the user has requested a bearer capability which is implemented by the equipment
which generated this cause but the user is not authorized to use.

0xba:

Bearer Capability not presently available


This cause indicates that the user has requested a bearer capability which is implemented by the equipment
which generated this cause but which is not available
this time.

0xbf:

Service or option not available, unspec.


This cause is used to report a service or option not available event only when no other cause in the service or
option not available class applies.

Service/option not implemented class


0xc1:

14

ISDN Error Codes

Bearer capability not implemented


This cause indicates that the equipment sending this
cause does not support the bearer capability requested.

Software Reference

1TR6 Causes (National ISDN)

0xc2:

Channel type not implemented


This cause indicates that the equipment sending this
cause does not support the channel type requested.

0xc5:

Requested facility not implemented


This cause indicates that the equipment sending this
cause does not support the requested supplementary
service.

0xc6:

Only restricted digital info. bearer cap. is available


This cause indicates that one equipment has requested
an unrestricted bearer services but that the equipment
sending this cause only supports the restricted version or
the restated bearer capability.

0xcf:

Service or option not implemented, unspecified


This cause is used to report a service or option not implemented event only when no other cause in the service
or option not implemented class applies.

Invalid message class

Software Reference

0xd1:

Invalid call reference value


This cause indicates that the equipment sending this
cause has received a message with a call reference
which is not currently in use on the user-network interface.

0xd2:

Identified channel does not exist


This cause indicates that the equipment sending this
cause has received a request to use a channel not activated on the interface for a call. For example, if a user
has subscribed to those channels on a primary rate interface numbered from 1 to 12 and the user equipment or
the network attempts to use channels 13 to 30 this cause
is generated.

0xd3:

A suspended call exist, but call identity does not


This cause indicates that a call resume has been attempted with a call identity which differs from that in use

ISDN Error Codes

15

You might also like