Scribd
Upload
63 views

T B T F: HE IN Ec Router Eatures

The document provides an overview of the major features of the BinTec router, including ISDN protocol support, V.110 support, ISDN callback support, bandwidth on demand, DHCP server capabilities, dynamic IP address assignment, extended IP routing, IP session accounting, network address translation, proxy ARP, RIP support, OSPF support, web based monitoring, RADIUS support, IP access lists, bridge filtering, and ISDN call screening.

Uploaded by

niko67
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

T B T F: HE IN Ec Router Eatures

The document provides an overview of the major features of the BinTec router, including ISDN protocol support, V.110 support, ISDN callback support, bandwidth on demand, DHCP server capabilities, dynamic IP address assignment, extended IP routing, IP session accounting, network address translation, proxy ARP, RIP support, OSPF support, web based monitoring, RADIUS support, IP access lists, bridge filtering, and ISDN call screening.

Uploaded by

niko67
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

1

THE BINTEC ROUTER


FEATURES
August 2000

Software Reference

The BinTec Router Features

The BinTec Router Features

Software Reference

Table of Contents

Table of Contents

THE BINTEC ROUTER


FEATURES
A

REFERENCE

The BinTec router Features

1.1

ISDN Features

1.1.1

ISDN Protocol Support

1.1.2

V.110 Support

1.1.3

ISDN Callback Support

1.2

IP Features

1.2.1

Bandwidth On Demand

1.2.2

DHCP Server

1.2.3

DNS and WINS (NBNS) Negotiation over PPP

1.2.4

Dynamic IP Address Assignment

1.2.5

Extended IP Routing

1.2.6

IP Session Accounting

10

1.2.7

Network Address Translation

11

1.2.8

Proxy ARP

11

1.2.9

RIP Support

13

1.2.10

OSPF

13

1.3

Security Features

13

1.3.1

Web based Monitoring

13

1.3.2

RADIUS support

14

1.3.3

IP Access Lists

15

1.3.4

Bridge Filtering

15

Software Reference

The BinTec Router Features

Table of Contents

1.3.5

ISDN Call Screening

16

The BinTec Router Features

Software Reference

REFERENCE

Software Reference

The BinTec Router Features

The BinTec router Features

The BinTec router Features

As a multiprotocol ISDN router, the BinTec router supports


too many networking protocols and ISDN features to cover
in detail in a single chapter. The configuration of many of
these features are tucked away in the BinTec routers systems tables and can only be explained in light of their usage. This chapter gives you an overview of the major features found on the BinTec router and references other
locations within this document where they are explained in
more detail.

1.1

ISDN Features

1.1.1

ISDN Protocol Support

The BinTec router supports the following ISDN protocols:


Euro ISDN (Europe)
1TR6 National ISDN in Germany
National ISDN 1 (USA)
National ISDN 2 (USA)
Northern Telecom DMS-100 (USA)
AT&T 5ESS Custom ISDN (USA)
NTT INS64 ISDN (Japan)
1.1.2

V.110 Support

V.110 is a ITU-T standard that defines the communications


procedures to use when a communications device cant
match the data rates offered by an ISDN and is aptly called
bit rate adaption. Basically the transmitter and receiver
have to agree to add additional bits during transmission to
adjust the data rate to a mutually compatible rate. Asyn-

The BinTec Router Features

Software Reference

IP Features

chronous bit rate adaptation is often used in communication with terminal adapters and for connecting to GSM networks from the ISDN.
The BinTec router supports bit rate adaption according
to the V.110 standard for both incoming and outgoing calls.
The type of bit rate adaption can be configured separately
for each dialup PPP partner in the biboPPPTable. This is explained in ISDN.
1.1.3

ISDN Callback Support

The BinTec router supports ISDN Callback in both directions. Also an important security feature, callback can be
configured on a per-partner basis to:
enabled
Here, the BinTec router accepts an initial
call from a specified partner. Upon
succesful identification, the BinTec router
immediately closes the connection and
returns the call.
expected
When callback is expected, the
BinTec router is the initiating party.
The BinTec router calls the specified
partner, closes the connection, and waits
(expects) the partner to return the call.
Configuring callback is covered in IP.

1.2

IP Features

1.2.1

Bandwidth On Demand

There is a range of possibilities available to optimize the efficiency of your line utilization. The BinTec router can bundle leased lines with dialup lines; it can bundle pure dialup

Software Reference

The BinTec Router Features

The BinTec router Features

lines; backup operation is also available for leased line connections; or Bandwidth On Demand can be configured for
backup connections.
For a detailed description and configuration, see IP.
1.2.2

DHCP Server

The BinTec router can be used as a DHCP (Dynamic Host


Configuration Protocol) Server to manage networking resources for a number of local or remote DHCP clients. This
is an efficient way of administering limited IP address resources. The BinTec router supports DNS and WINS Relay.
Clients such as Windows 95 and Windows NT hosts can
be configured to request networking resources from a
DHCP server and to adjust their configurations appropriately. Configuring the BinTec router as a DHCP server is
covered in IP.
1.2.3

DNS and WINS (NBNS) Negotiation over PPP

The BinTec router supports DNS and WINS Negotiation


over PPP as specified in RFC 1877. This means that the
BinTec router is able to negotiate and configure its primary
and secondary domain name servers and its primary and
secondary NetBios name servers at connection time with
compliant hosts.
DNS/WINS Negotiation over PPP can be configured
separately for each PPP partner in the biboPPPTable; this is
covered in IP.
1.2.4

Dynamic IP Address Assignment

Dynamic IP address assignment in both client and server


modes.

The BinTec Router Features

Software Reference

IP Features

Client Mode

In client mode the BinTec router is


configured to accept its own IP
address after establishing an IP
connection.
This is useful for sites using low to
mid-range BinTec routers to connect
to Internet Service Providers.
Server Mode
In server mode the BinTec router
assigns an available IP addresses
from a preconfigured IP address pool.
This is useful for any site using a
BinTec router product as a remote
access point to a central LAN.
Dynamic IP address assignment can be configured for
each partner separately in the biboPPPtable. This is covered in IP.
1.2.5

Extended IP Routing

Most routers base IP routing decisions solely on an IP packets destination address. With Extended IP Routing on the
BinTec router, routing decisions can be made based on additional information contained in the data packet. This
gives you a much finer control over routing decisions and
allows you to make routing decisions based on the contents
of the IP packet:
Type of Service (TOS field in ethernet frame)
Source IP Address
TCP Source Port
TCP Destination Port
Routing decisions can also be based on BinTec router interfaces:
Source Interface
State of the Destination Interface

Software Reference

The BinTec Router Features

The BinTec router Features

The main advantage of extended IP routing is that traffic


can be selectively routed over different transport mediums
based on your sites needs. Some users require greater
bandwidth for bulk data transmissions while others need
shorter bursts for interactive sessions. Extended IP routing
allows you to take advantage of different technologies (ISDN dialup, leased lines, X.25, and/or X.31 links) based on
your sites specific needs.
Configuring Extended IP Routing is covered in Chapter
Configuring the BRICK as an IP Router.
1.2.6

IP Session Accounting

As an advanced IP feature, IP Session Accounting lets you


generate BinTec router accounting records for each TCP,
UDP, or ICMP session routed over the BinTec router. Accounting records contain information such as protocol usage, source and destination addresses, transfer activity, and
the date, time, and duration of the IP session. By default, accounting records are written to the BinTec routers system
logging table but can also be forwarded to remote log hosts
on the LAN for later processing. (See in Chapter 5).
Session accounting can be configured on a per-interface
basis in the ipSessionTable. This is covered in IP Session Accounting.

10

The BinTec Router Features

Software Reference

IP Features

1.2.7

Network Address Translation

With Network Address Translation, or NAT, the BinTec


router is able to hide a complete LAN behind a single IP address. This means that no matter how many users are connected to the LAN, only one official IP address is required
to connect the complete LAN to the Internet. This address
can also be a static address or dynamically assigned by an
ISP at connection time.
NAT is accomplished by manipulating all incoming/
outgoing IP packets to reflect different source and destination addresses. The translation process remains invisible to
the connected networks. Hosts on the LAN continue to use
standard IP addresses, however they are no longer accessible from hosts external to the LAN.
NAT is most useful where:
Security is an issue. (controlling access to a limited
number of hosts)
The number of available IP addresses is limited.
Monitoring of outgoing connections is desired.
NAT is an advanced IP feature, Configuring NAT see
Chapter Network Address Translation.
1.2.8

Proxy ARP

Proxy ARP is supported on the BinTec router for dial-in


hosts that arent connected directly to the LAN. With Proxy
ARP the BinTec router answers ARP requests for such
hosts. To the local hosts the dial-in host appears to be on the
LAN segment. Note that ARP (Address Resolution Protocol) is a standard method used to map IP addresses to physical MAC address.

Software Reference

The BinTec Router Features

11

The BinTec router Features

Proxy ARP on the BinTec router is straightforward; the


respective interface is enabled in the ipExtIfTable, the
BinTec router adjusts its routing tables automatically. See
Chapter Proxy ARP for more information on configuring
Proxy ARP.

12

The BinTec Router Features

Software Reference

Security Features

1.2.9

RIP Support

The Routing Information Protocol is commonly used in IP


networks to propagate routing information among routers.
The BinTec router supports version 1 and version 2 of RIP.
Selected BinTec router interfaces can be configured to independently send (and/or receive) version 1, version 2, both,
or no RIP packets.
See the Advanced IP Features section for information on
configuring RIP Options.
1.2.10

OSPF

The BinTec router supports OSPF (Open Shortest Path First)


and has been implemented according to the Internet standsards defined in RFCs 1583 (OSPF Version 2), 1793 (OSPF
over Demand Circuits), and 1850 (OSPF Version 2 Management Information Base).
Special OSPF features such as MD5 authentification, importing of routing information via external protocols, and
propagation of system-wide default routes is also supported.
For background info on the OSPF protocol refer to OSPF.
Configuring OSPF on the BinTec router is explained in detail in the section Routing with OSPF.

1.3

Security Features

1.3.1

Web based Monitoring

A HTTP server is included on the BinTec router and provides SNMP community password protected access to all
system tables and variables via a TCP connection (port 80

Software Reference

The BinTec Router Features

13

The BinTec router Features

by default). This means that the BinTec router can be monitored via any WWW browser1.
A built-in status page provides a quick overview of current operating state and hypertext links to all system information. A CGI program is also included and allows you to
monitor selected system variables. Simply point a compatible web browser at the BinTec routers status page as follows.
http://<BinTec routers System Name><:HTTP Port
Number>
More information on web based access to the BinTec
router is covered in Chapter System Administration.
1.3.2

RADIUS support

RADIUS (Remote Authentication Dial In User Service), is


an emerging client - server security system (initially developed by Livingston Enterprises, Inc.) to control access to
network resources. The RADIUS server manages a database of user authentication data.
The BinTec router can be configured to operate as a RADIUS client that consults the RADIUS server at connection
time for specified dial-in partners. Partner specific connection parameters can be centrally managed in this way. This
allows sites already using the RADIUS systems to centrally
manage network resources, to easily integrate the BinTec
router into their existing network management system.
RADIUS support is configured using the biboAdmRadiusServer variable and the biboPPPTable. This is covered in
Chapter IP.

1.Browsers must support the HTML 2.0 standard and HTML tables (RFC
1942).

14

The BinTec Router Features

Software Reference

Security Features

1.3.3

IP Access Lists

IP Access Lists provide you with the ability to fine tune access restrictions to and from connected IP networks. Access
lists define the types of IP traffic that the BinTec router
should accept or deny (i.e., packets are either routed or are
discarded). Access decisions are based on information contained in the IP packet such as:
Source and/or Destination IP Address
Source IP port (port ranges are supported)
Destination IP port (port ranges are supported)
Sites using the BinTec router to connect a LAN to the Internet for example might want to deny all incoming FTP requests, or outgoing telnet sessions from selected LAN
hosts. Access Lists provide a powerful tool in controlling
access to network resources. Refer to your Users Guide for
more information.
1.3.4

Bridge Filtering

Bridge Filtering, sometimes called packet filtering, can be


used to control the type and amount of traffic that is
bridged over local interfaces. This is an important feature
most useful when bridging over WAN links such as ISDN.
Bridge filtering is relevant for sites requiring bridging
where:
Minimizing ISDN costs is a concern.
Greater control of bridging traffic is desired.
See the section Bridge Filtering in Chapter Bridging for
detailed information.

Software Reference

The BinTec Router Features

15

The BinTec router Features

1.3.5

ISDN Call Screening

The BinTec router supports the call screening service provided by the ISDN and uses this service as an additional security measure to check the authenticity of incoming ISDN
connections.
Call screening is mainly used in screening incoming PPP
connections but can also be used to ensure access to the
BinTec routers isdnlogin service is secure. Refer to Chapter
ISDN, for information on using the ISDN screening mechanism.

16

The BinTec Router Features

Software Reference

You might also like