Bombas Serie 26000 y 25505

Gear Pumps and Motors
Technical Catalog
Series 26 Pumps
Series 26 Motors
Series L2 Pumps
Table of Contents
Series 26 Pumps
Features ........................................................................................................................................................................3
General Specifications and Performance Data ..............................................................................................................4
Performance Data Charts ..............................................................................................................................................5
Standard Catalog Assemblies - Dimensions ................................................................................................................9
Order Numbers............................................................................................................................................................10
Optional Configurations ..............................................................................................................................................12
Component Parts - Dimensions ..................................................................................................................................13
Model Code - Single ....................................................................................................................................................16
Model Code - Multiple ................................................................................................................................................17
Side-Load Applications ................................................................................................................................................19
Load Sensing Priority Valve ........................................................................................................................................21
Series 26 Motors
General Specifications ................................................................................................................................................22
Performance Data........................................................................................................................................................23
Series L2 Pumps
General Specifications and Performance Data ............................................................................................................25
Performance Data Charts ............................................................................................................................................26
Standard Catalog Assemblies - Dimensions ..............................................................................................................28
Order Numbers ..........................................................................................................................................................29
Optional Configurations ..............................................................................................................................................31
Component Parts - Dimensions ..................................................................................................................................32
Model Code - Multiple ................................................................................................................................................36
EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 Pump
Features
Pressures to 3500 PSI
and flow to 24.1 GPM
Quiet Operation
Improved Efficiency
Field Reversible
Interchangeability
The 13-tooth gears, versus

10 teeth in previous
pumps, minimizes the flow
ripple. This reduces noise
as well as vibration.
Improved bearing lubrication system uses inlet oil

instead of high pressure
oil, improving volumetric
efficiency for more power
output.
The innovative new wear

plate permits simple field
reversibility of the pump
direction. Simply open the
pump, switch the drive
gear and idler gear, reposition the plug and reassemble. No extra parts are
needed.
The Series 26 Gear Pump

has been designed to
retrofit equipment using
the B1 and B2 Gear
Pumps. Extra shafts, porting, and mounting configurations, as well as 13 available displacements, give
you the choices you need
for an easy conversion to
this superior pump.
The improved trap reliefs

not only increase power,
they also help keep oil
flowing smoothly to reduce
noise.
The highly polished shaft

and gears improve
mechanical efficiency and
reduce wear on these
components, adding to the
service life and reliability of
the pump.
The optimized trapped oil
relief areas help reduce
pressure ripple for quieter
operation. This also
decreases the input power
requirements.
Series 26 Pump
General
Specifications
and Performance
Data
Rotation
Mounting Flange
Max. Continuous Pressure
Max. Intermittent Pressure
Minimum Speed at Continuous Pressure
Maximum Rotating Torque at 0 Pressure
Maximum Continuous Operating Temperature
Minimum Continuous Oil Viscocity
Minimum Operating Temperature
Maximum Inlet Vacuum at Operating Condition
Field Reversible
SAE A 2 Bolt
210 bar [3000 PSI]*
240 bar [3500 PSI]**
750 RPM
4 Nm [36 lb-in]
105C [220F]
5.7 cSt [45 SUS]
-29C [-20F]
0,8 bar Abs. [11.6 psi Abs.]
Continuous - pump may be run continuously at these ratings.
Intermittent - intermittent operation, 10% of every minute.

*
30.6 cm3/rev. [1.87 in3/rev.] displacement max. continuous pressure is 190 bar [2750 PSI].
** 30.6 cm3/rev. [1.87 in3/rev.] displacement max. intermittent pressure is 224 bar [3250 PSI].
For side load limits consult your Eaton representative.
Displacement cm3/r [in3/r]

Max. Intermittent Pressure bar [PSI]
Rated Speed (RPM)
Minimum Output Flow at 207 bar [3000 PSI]
and Rated Speed LPM [GPM]
Input Power at 207 bar [3000 PSI] and
Rated Speed and Cont. Pressure kW [HP]

Rated Speed (RPM)
6,6
[.40]
241
[3500]
3600
20,1
[5.3]
9,7
[13.0]
8,2
[.50]
241
[3500]
3600
25,0
[6.6]
11,9
[15.9]
9,5
[.58]
241
[3500]
3600
29,5
[7.8]
14,1
[18.9]
10,8
[.66]
241
[3500]
3600
33,7
[8.9]
15,5
[20.8]
13,8
[.84]
241
[3500]
3600
43,5
[11.5]
20,0
[26.8]
16,7
[1.02]
241
[3500]
3600
55,3
[14.6]
22,0
[29,4]
22,5
[1.37]
241
[3500]
3000
62,1
[16.4]
27,3
[36.6]
24,3
[1.48]
241
[3500]
3000
67,0
[17.7]
30,5
[40.9]
25,2
[1.54]
241
[3500]
3000
69,7
[18.4]
31,0
[41.6]
27,7
[1.69]
241
[3500]
3000
76,5
[20.2]
33,4
[44.8]
29,0
[1.77]
234
[3400]
3000
79,9
[21.1]
35,4
[47.4]
30,6
[1.87]
224
[3250]
3000
84,4
[22.3]
37,4
[50.1]
19,7
[1.20]
241
[3500]
3200
57,9
[15.3]
26,2
[35.2]
The performance data in the table above and the following graphs was collected using a mineral base oil with a viscosity of 133 SUS at 49C [120F].
Ordering Information
Catalog Assemblies Cross
Reference
Standard catalog assemblies are
built from high production parts
and are the most economical
pump assemblies available in this
series. The standard assembly
order number is a preassigned

part number and may be used to
order the specific standard
assembly (see pages 1013). The
far right column lists the B1 or B2
pump replaced by the Series 26
pump.
Series 26 Pump
Performance Data
Charts
6,5619,68 cm3/rev [.401.20 in3/rev]
6,56 cm3/rev [.40 in3/rev]

13 [17]
70
60
11 [15]
[15]
19,
7[
1.2
16,
0]
7[
13
1
.
02]
,8
10
[.8
,8
4]
[.6
6]
10 [13]
9.5
8,2
[.5
0]
[.5
01]
[.4
6,6
20
207
Ba
Ba
r[
300
r[
25
0P
00
S I]
PS
I]
8]
30
7 [9]
6 [8]
5 [7]
8
13
4 [5]
r[
Ba
I]
PS
SI]
P
00
[15
ar
SI]
4B
0P
10
100
[
r
Ba
69
PSI]
500
[
r
a
35 B
[5]
3 [4]
2 [3]
10
00
20
[10]
8 [11]
17
40
9 [12]
Input kW [HP]
50
1 [1.3]
[0]
1000
2000
3000
3600
1000
8,20 cm3/rev [.50 in3/rev]
12 [16]
24 [32]
11 [15]
22 [29.5]
207
17
Ba
2
8B
r[
Ba
300
ar
r [2
0P
[20
50
0
SI]
00
PS
PS
I]
I]
26 [35]
8 [11]
13
7 [9]
6 [8]
00
18 [24]
16 [21.5]
I]
PS
15
5 [7]
4
10
r[
Ba
SI]
00 P
4 [5]
14 [19]
12 [16]
]
SI
P
00
10 [13]
ar
6 [8]
r
35 Ba
2 [3]
PSI
[500
1 [1.3]
4 [5]
2 [3]
[30
00
I
PS
I]
25
PS
r[
Ba 2000
2
[
SI]
17 Bar
0P
0
5
8
r [1
13
Ba
SI]
104
00 P
r [10
a
B
69
PSI]
r [500
35 Ba
7B
20
8 [11]
10
r[
Ba
69
3 [4]
3600
20 [27]
Input kW [HP]
9 [12]
3000
9,51 cm3/rev [.58 in3/rev
13 [17]
10 [13]
2000
Speed RPM
Speed RPM
Input kW [HP]
Flow in L/min. [GPM] @ 138 bar [2000 PSI]
12 [16]
0
0
1000
2000
Speed RPM
3000
3600
1000
2000
3000
3600
Speed RPM
Series 26 Pump
Performance Data
Charts
10,82 cm3/rev [.66 in3/rev]

24 [32]
24 [32]
22 [29.5]
22 [29.5]
20 [27]
20 [27]
18 [24]
18 [24]
10 [13]
8 [11]
13
6 [8]
10
4 [5]
69
8B
ar
0
[2 0
r [1
Ba
[1
Bar
2 [3]
0
50
000
00
ar [5
35 B
0P
]
SI
PS
I]
00
30
10 [13]
13
8 [11]
18
69
4 [5]
PSI]
PS
20
P
00
]
SI
15
r[
Ba
0
[1 0
Bar
0P
r [5 0 0
3 5 Ba
2 [3]
00
SI]
PSI]
0
0
1000
2000
3000
3600
16,73 cm3/rev [1.02 in3/rev]

26 [35]
24 [32]
24 [32]
22 [29.5]
22 [29.5]
20 [27]
20 [27]
ar
8B
13
I]
PS
0
0
[20
I]
PS
00
5
[1
ar
4B
0
1
SI]
0P
0
0
[1
Bar
69
SI]
00 P
ar [5
B
5
3
10 [13]
8 [11]
6 [5]
4 [4]
16 [21.5]
14 [19]
12 [16]
13
12 [16]
18 [24]
Input kW [HP]
14 [19]
3000
3600
17
2B
8B
ar
207
ar
[25
[20
Ba
00
r [3
00
PS
000
PS
I]
PS
I]
I]
26 [35]
17
20
2B
7B
ar
ar
[25
[30
00
00
PS
PS
I]
I]
28 [37.5]
16 [21.5]
2000
19,68 cm3/rev [1.20 in3/rev]
28 [37.5]
18 [24]
1000
Speed RPM
Speed RPM
Input kW [HP]
r[
Ba
6 [8]
]
P SI
I]
ar
[
7B
ar
[
2B
12 [16]
10 [13]
1
r[
Ba
4
0
8 [11]
2 [3]
0
50
0
[10
ar
9B
I]
PS
0P
6 [5]
4 [4]
00
ar [5
35 B
SI]
PSI]
2 [3]
0
0
1000
2000
3200
Speed RPM
6
25
20
14 [19]
17
12 [16]
16 [21.5]
Input kW [HP]
14 [19]
17
Input kW [HP]
16 [21.5]
00
20
7
Ba B a
r [ r [3
25
0
00 00 P
PS
SI
]
I]
PS
26 [35]
I]
13,78 cm3/rev [.84 in3/rev]
26 [35]
1000
2000
Speed RPM
3200
Series 26 Pump
Performance Data
Charts
22,4730,67 cm3/rev [1.371.87 in3/rev]
24 [32]
24,3 [1.48]
22 [29.5]
22,5 [1.37]
20 [27]
60
[15]
50
207
Ba
Ba
r[
r[
ar
250
300
[20
0P
0P
S
00
SI]
I
]
PS
I]
70
25,2 [1.54]
26 [35]
18 [24]
172
[20]
28 [37.5]
16 [21]
13
8B
80
30,6 [1.87]
29,0 [1.77]
27,7 [1.69]
Input kW [HP]
Flow in L/min. [GPM] @ 138 bar [2000 PSSI]
90
22,47 cm3/rev [1.37 in3/rev]
14 [19]
12 [16]
40
]
SI
[10]
10 [13]
10
30
r
Ba
8 [11]
20
P
00
00
[10
6 [5]
69
4 [4]
500
ar [
35 B
[5]
10
r
Ba
[1
I]
PS
PSI]
2 [2.7]
0
[0]
0
0
1000
2000
1000
3000
3000
Speed RPM
Speed RPM
24,27 cm3/rev [1.48 in3/rev]
32 [43]
2000
25,56 cm3/rev [1.54 in3/rev]

32,84 [44]
30 [40]
29,84 [40]
28 [37.5]
26,86 [36]
26 [35]
16 [21]
17,90 [24]
14,92 [20]
138
Ba
14 [19]
207
172
Ba r
B
[300
[20 ar [2
0P
5
0
00
00
0P
SI ]
PS
PS
SI]
I
]
I]
18 [24]
20,89 [28]
8B
ar
11,94 [16]
I]
[1
ar
9B
6 [5]
ar
ar
5,97 [8]
500
r[
5 Ba
4 [4]
8,95 [12]
PS
10
0
00
8 [11]
B
69
]
PSI
I]
4B
4B
10 [13]
13
ar
12 [16]
[15
207
20 [27]
Input kW [HP]
Bar
[300
0P
Ba
r [2
[15
SI]
r [2
000
00
5
0
PS
PS
0P
I]
SI]
I]
23,87 [32]
172
22 [29.5]
10
Input kW [HP]
24 [32]
2,98 [4]
0
00
PS
[1
00
r [5
5 Ba
]
PS I
2 [3]
0
0
1000
2000
Speed RPM
3000
1000
2000
3000
Speed RPM
Series 26 Pump
Performance Data
Charts
38 [51]
36 [48]
36 [48]
36 [48]
34 [45.5]
34 [45.5]
34 [45.5]
32 [43]
32 [43]
32 [43]
30 [40]
30 [40]
10
4B
12 [16]
10 [13]
00
8 [11]
69
1000
2000
Speed RPM
[250
Bar
35
00
Ba
r [2
0
138
00
PS
I]
18 [24]
[15
16 [21]
4B
10
10
r[
a
B
I]
12 [16]
]
SI
0P
0
00
10 [13]
ar
50
r[
Ba
PS
[1
B
69
8 [11]
I]
4 [4]
3000
20 [27]
14 [19]
SI]
0P
[50
ar
6 [5]
35
4 [4]
2 [3]
2 [3]
22 [29.5]
ar
Input kW [HP]
172
24 [32]
S
0P
6 [5]
2 [3]
0
69
8 [11]
[50
26 [35]
10 [13]
SI]
0P
r
Ba
35
4 [4]
12 [16]
I]
PS
10
r[
Ba
6 [5]
16 [21]
14 [19]
ar
[15
0
14 [19]
18 [24]
138
16 [21]
20 [27]
28 [37.5]
ar
18 [24]
22 [29.5]
4B
20 [27]
24 [32]
10
22 [29.5]
138
Input kW [HP]
24 [32]
26 [35]
Input kW [HP]
26 [35]
28 [37.5]
30 [40]
PS
I]
38 [51]
207
bar
[300
0P
P SI
SI]
]
38 [51]
172
207
Bar
bar
[25
B
[15
ar
00 P
[300
00
[20
S
PSI
I
]
PS
00
]
PS
I]
I]
40 [54]
172
207
Bar
bar
Ba
[25
r[
[300
0
200
0P
0P
PSI
SI]
0P
]
SI
SI]
]
40 [54]
28 [37.5]
30,67 cm3/rev [1.87 in3/rev]
29,03 cm3/rev [1.77 in3/rev]
27,72 cm3/rev [1.69 in3/rev]
40 [54]
1000
2000
Speed RPM
3000
1000
2000
Speed RPM
3000
Series 26 Pump
Standard Catalog
Assemblies Dimensions
* Multiple pump input

torque limitations:
the total torque for multiple pump displacements
and pressure combinations cannot exceed the
maximum input torque
rating of the shaft.

The proper formula is
Pressure times Displacement
divided by 6.28.
All dimensions are in mm [in].
25.9
[1.02]
CL
15.0
[.59]
21.1
[.83]
130.0
[5.12]
6.4
[.25]
18
[.71]
106.4
[4.19]
See Shaft
Drawing
Driveshaft
Centerline
Dia.
82.52.030
[3.249.001]
18
[.71]
Pressure Port
Rear Porting
Suction Port
Side Porting
Suction Port
Rear Porting
Pressure Port
Side Porting
46.2
[1.82]
92.5
[3.64]
47.6
[1.88]
83.3
[3.28]
2X Dia.
11.56.13
[.455.005]
2X Dim A
Dim B
CL
Left Hand Rotation Shown
MODEL
26001
26002
26003
26004
26005
Displacement (cm3/r [in3/r])

Dimension A (mm [in])
Dimension B (mm [in])
6.6 [.40]
72.6 [2.86]
93.2 [3.67]
8.2 [.50]
74.3 [2.93]
94.9 [3.74]
9.5 [.58]
75.9 [2.99]
96.5 [3.80]
10.8 [.66]
77.5 [3.05]
98.1 [3.86]
13.8 [.84]
16.7 [1.02] 19.7 [1.20]
80.7 [3.18] 83.9 [3.30] 87.1 [3.43]
101.3 [3.99] 104.5 [4.11] 107.7 [4.24]
MODEL
26008
26009
26010
26011
26012

Dimension B (mm [in])
22.5 [1.37] 24.3 [1.48] 25.2 [1.54] 27.7 [1.69] 29.0 [1.77] 30.6 [1.87]
90.3 [3.56] 92.7 [3.65] 93.5 [3.68] 96.7 [3.81] 98.6 [3.88] 99.9 [3.93]
110.9 [4.37] 113.3 [4.46] 114.1 [4.49] 117.3 [4.62] 119.1 [4.69] 120.5 [4.74]
5/8 Inch 9 Tooth Spline

Maximum Input Torque
62 Nm [550 lb-in]
31.8
[1.25]

119 Nm [1050 lb-in]
31.7
[1.25]
3/4 Inch Straight Key

113 Nm [1000 lb-in]
31.7 [1.25]
4.8
[.19]
Key
4.724.038
[.1860.0015]
21.01.10
[.827.004]
9 Tooth 16/32 DP 30
Involute Flat Root Class 1
Side Fit Spline SAE J498b
22.4 [.88] Min Full Spline
11 Tooth 16/32 DP 30
Involute Flat Root Class 1
Side Fit Spline SAE J498b
22.2 [.88] Full Depth
Dia.
19.047.003
[.7499.0001]
26006
26007
26013

56 Nm [500 lb-in]
31.8
[1.25]
23.9 [.94]
17.4 [.68]
4.8 [.19]
Key
3.94.03
[.155.001]
17.60.13
[.693.005]
Dia.
15.85.03
[.624.001]
Series 26 Pump
Order Numbers
RIGHT HAND
ROTATION
PRODUCT NO
LEFT HAND
ROTATION
PRODUCT NO
* 5/8 9 T Spline has a maximum allowable input torque of 62 Nm [550 lb-in].

** 5/8 Keyed shaft has a maximum allowable input torque of 56 Nm [500 lb-in].
SHAFT
Model 26001 6,6 cm /r [.40 in /r] Displacement

26001-RZG
26001-LZG
5/8 Keyed
26001-RZH
26001-LZH
5/8 Keyed
26001-RZJ
26001-LZJ
5/8 9 T Spline
26001-RZK
26001-LZK
5/8 9 T Spline
Model 26002 8,2 cm3/r [.50 in3/r] Displacement
26002-RZA
26002-LZA
3/4 11T Spline
26002-RZB
26002-LZB
3/4 11T Spline
26002-RZC
26002-LZC
3/4 Keyed
26002-RZD
26002-LZD
3/4 Keyed
26002-RZE
26002-LZE
5/8 9 T Spline
26002-RZF
26002-LZF
5/8 9 T Spline
26002-RZG
26002-LZG
5/8 Keyed
26002-RZH
26002-LZH
5/8 Keyed
26002-RZJ
26002-LZJ
5/8 9 T Spline
26002-RZK
26002-LZK
5/8 9 T Spline
26003-RZG
26003-LZG
5/8 Keyed
26003-RZH
26003-LZH
5/8 Keyed
26003-RZJ
26003-LZJ
5/8 9 T Spline
26003-RZK
26003-LZK
5/8 9 T Spline
26004-RZA
26004-LZA
3/4 11T Spline
26004-RZB
26004-LZB
3/4 11T Spline
26004-RZC
26004-LZC
3/4 Keyed
26004-RZD
26004-LZD
3/4 Keyed
26004-RZE
26004-LZE
5/8 9 T Spline
26004-RZF
26004-LZF
5/8 9 T Spline
26004-RZG
26004-LZG
5/8 Keyed
26004-RZH
26004-LZH
5/8 Keyed
26004-RZJ
26004-LZJ
5/8 9 T Spline
26004-RZK
26004-LZK
5/8 9 T Spline
26005-RZA
26005-LZA
3/4 11T Spline
26005-RZB
26005-LZB
3/4 11T Spline
26005-RZC
26005-LZC
3/4 Keyed
26005-RZD
26005-LZD
3/4 Keyed
26005-RZE
26005-LZE
5/8 9 T Spline
26005-RZF
26005-LZF
5/8 9 T Spline
26005-RZG
26005-LZG
5/8 Keyed
26005-RZH
26005-LZH
5/8 Keyed
26005-RZJ
26005-LZJ
5/8 9 T Spline
26005-RZK
26005-LZK
5/8 9 T Spline
Model 26006 16,7 cm3/r [1.02 in3/r] Displacement
26006-RZA
26006-LZA
3/4 11T Spline
26006-RZB
26006-LZB
3/4 11T Spline
26006-RZC
26006-LZC
3/4 Keyed
26006-RZD
26006-LZD
3/4 Keyed
26006-RZE
26006-LZE
5/8 9 T Spline
26006-RZF
26006-LZF
5/8 9 T Spline
26006-RZG
26006-LZG
5/8 Keyed
26006-RZH
26006-LZH
5/8 Keyed
26006-RZJ
26006-LZJ
5/8 9 T Spline
26006-RZK
26006-LZK
5/8 9 T Spline
3
10
PORT
LOCATION
SAE O-RING
PRESSURE
PORT SIZE
SAE O-RING
SUCTION
PORT SIZE
REPLACES
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
24300-RZA/LZA
24300-RZC/LZD
24300-RZB/LZA
24300-RZD/LZE
Side
Rear
Side
Rear
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
25300-RSA/LSA
25300-RSB/LSB
25300-RSC/LSC
25300-RSD/LSD
25300-RSE/LSE
25300-RSF/LSF
24301-RZC/LZA
24301-RZG/LZG
24301-RZD/LZB
24301-RZH/LZH
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
24302-RZB/LZB
24302-RZC/LZD
24302-RZA/LZA
24302-RZD/LZE
Side
Rear
Side
Rear
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
25301-RSA/LSA
25301-RSB/LSB
25301-RSC/LSC
25301-RSD/LSD
25301-RSE/LSE
25301-RSF/LSF
24303-RZB/LZB
24303-RZE/LZF
24303-RZD/LZA
24303-RZF/LZG
Side
Rear
Side
Rear
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
25302-RSA/LSA
25302-RSB/LSB
25302-RSC/LSC
25302-RSD/LSD
25302-RSE/LSE
25302-RSF/LSF
24304-RZC/LZA
24304-RZG/LZF
24304-RZD/LZB
24304-RZH/LZG
Side
Rear
Side
Rear
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
25303-RSA/LSA
25303-RSB/LSB
25303-RSC/LSC
25303-RSD/LSD
25303-RSE/LSE
25303-RSF/LSF
24305-RZC/LZA
24305-RZG/-LZF
24305-RZD/LZB
24305-RZH/LZG
Series 26 Pump
Order Numbers
RIGHT HAND
ROTATION
PRODUCT NO
LEFT HAND
ROTATION
PRODUCT NO
* 5/8 9 T Spline has a maximum allowable input torque of 62 Nm [550 lb-in].

** 5/8 Keyed shaft has a maximum allowable input torque of 56 Nm [500 lb-in].
SHAFT
Model 26007 19,7 cm /r [1.20 in /r] Displacement

26007-RZA
26007-LZA
3/4 11T Spline
26007-RZB
26007-LZB
3/4 11T Spline
26007-RZC
26007-LZC
3/4 Keyed
26007-RZD
26007-LZD
3/4 Keyed
26007-RZE
26007-LZE
*5/8 9 T Spline
26007-RZF
26007-LZF
*5/8 9 T Spline
26007-RZG
26007-LZG
**5/8 Keyed
26007-RZH
26007-LZH
**5/8 Keyed
26007-RZJ
26007-LZJ
*5/8 9 T Spline
26007-RZK
26007-LZK
*5/8 9 T Spline
26008-RZA
26008-LZA
3/4 11T Spline
26008-RZB
26008-LZB
3/4 11T Spline
26008-RZC
26008-LZC
3/4 Keyed
26008-RZD
26008-LZD
3/4 Keyed
26008-RZE
26008-LZE
*5/8 9 T Spline
26008-RZF
26008-LZF
*5/8 9 T Spline
26009-RZG
26009-LZG
**5/8 Keyed
26009-RZH
26009-LZH
**5/8 Keyed
26009-RZJ
26009-LZJ
*5/8 9 T Spline
26009-RZK
26009-LZK
*5/8 9 T Spline
26010-RZA
26010-LZA
3/4 11T Spline
26010-RZB
26010-LZB
3/4 11T Spline
26010-RZC
26010-LZC
3/4 Keyed
26010-RZD
26010-LZD
3/4 Keyed
26010-RZE
26010-LZE
*5/8 9 T Spline
26010-RZF
26010-LZF
*5/8 9 T Spline
26011-RZA
26011-LZA
3/4 11T Spline
26011-RZB
26011-LZB
3/4 11T Spline
26011-RZC
26011-LZC
3/4 Keyed
26011-RZD
26011-LZD
3/4 Keyed
26011-RZE
26011-LZE
*5/8 9 T Spline
26011-RZF
26011-LZF
*5/8 9 T Spline
26012-RZG
26012-LZG
**5/8 Keyed
26012-RZH
26012-LZH
**5/8 Keyed
26012-RZJ
26012-LZJ
*5/8 9 T Spline
26012-RZK
26012-LZK
*5/8 9 T Spline
26013-RZA
26013-LZA
3/4 11T Spline
26013-RZB
26013-LZB
3/4 11T Spline
26013-RZC
26013-LZC
3/4 Keyed
26013-RZD
26013-LZD
3/4 Keyed
26013-RZE
26013-LZE
*5/8 9 T Spline
26013-RZF
26013-LZF
*5/8 9 T Spline
3
PORT
LOCATION
SAE O-RING
PRESSURE
PORT SIZE
SAE O-RING
SUCTION
PORT SIZE
REPLACES
Side
Rear
Side
Rear
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
25304-RSA/LSA
25304-RSB/LSB
25304-RSC/LSC
25304-RSD/LSD
25304-RSE/LSE
25304-RSF/LSF
24306-RZA/LZA
24306-RZE/LZF
24306-RZD/LZB
24306-RZF/LZG
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
25305-RSA/LSA
25305-RSB/LSB
25305-RSC/LSC
25305-RSD/LSD
25305-RSE/LSE
25305-RSF/LSF
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
24307-RZC/LZA
24307-RZG/LZF
24307-RZD/LZB
24307-RZH/LZG
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
25306-RSA/LSA
25306-RSB/LSB
25306-RSC/LSC
25306-RSD/LSD
25306-RSE/LSE
25306-RSF/LSF
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
25307-RSA/LSA
25307-RSB/LSB
25307-RSC/LSC
25307-RSD/LSD
25307-RSE/LSE
25307-RSF/LSF
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
1-1/16-12 UN-2B
24308-RZA/LZA
24308-RZE/LZF
24308-RZD/LZB
24308-RZF/LZG
Side
Rear
Side
Rear
Side
Rear
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
7/8-14 UNF-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
1-5/16-12 UN-2B
25308-RZA/LZA
25308-RZB/LZB
25308-RZC/LZC
25308-RZD/LZD
25308-RZE/LZE
25308-RZF/LZF
11
Series 26 Pump
Optional
Configurations
The Series 26 Gear Pump
components can be assembled into many optional configurations. The versatile
design allows you to assemble a pump to meet your
specific needs.
Single Gear Pump with

Tandem Backplate
Double Gear Pump with

Tandem Backplate
Triple Gear Pump with Two Suction

Ports and Tandem Backplate
Model codes for single and

multiple pumps along with
the component part dimension drawings are given on
the following pages.
Single Gear Pump
Double Gear Pump with

Common Suction Port
Triple Gear Pump with

Two Suction Ports
Single Gear Pump

with Relief Valve

Ports and Tandem Flow Divider Backplate
Double Gear Pump

with Relief Valve
Triple Gear Pump with Two

Suction Ports and Relief Valve
12
Double Gear Pump with Tandem

Flow Divider Backplate
Single Gear Pump w/Tandem

Single Gear Pump with Flow

Divider and Relief Valve
Double Gear Pump with Flow

Divider and Relief Valve

Ports, Flow Divider and Relief Valve
Series 26 Pump
Component Parts Dimensions
Front Plate
SAE A 2 Bolt Flange used
on all Standard Catalog
Assemblies
15.0
[.59]
130.0
[5.12]
6.4
[.25]
B Mount
106.4
[4.19]
2X 14,27 [.562]
47.6
[1.88]
Dia.
82.52.03
[3.249.001]
101,58 +/- 0,03

[3.999 +/- .001]
83.3
[3.28]
30.4
[1.20]
Interrupted
pilot does
not allow
o-ring sealing.
A Gasket or sealant
must be used in
wet mount applications.
2X Dia.11.56.13 CL
[.455.005]
9,4
[.37]
146,0 [5.75]
174,5 [6.87]
4 Bolt Euro Mount

90 [3.54]
Body
4X 9.1 [.36]
Used on Single and

Multiple Pumps
45 [1.77]
4X 45
7,1
[.28]
47,8
[1.88]
34,5
[1.36]
79.92 +/- 0,03

[3.146 +/- 0.001]
125,7
[4.95]
100,1
[3.94]
134,9
[5.31]
72,1
[2.84]
Dim A
36,1
[1.42]
Model
26001
6.6 [.40]
14.4 [.57]
26002
8.2 [.50]
16.3 [.64]
26003
9.5 [.58]
17.7 [.70 ]
26004
10.8 [.66]
19.5 [.77]
26005
13.8 [.84]
22.7 [.89]
26006
16.7 [1.02]
25.9 [1.02]
Model
26008
22.5 [1.37]
32.3 [1.27]
26009
24.3 [1.48]
34.7 [1.36]
26010
25.2 [1.54]
35.5 [1.40]
26011
27.7 [1.69]
38.7 [1.52]
26012
29.0 [1.77]
40.3 [1.59]
26013
30.6 [1.87]
41.9 [1.65]
26007
19.7 [1.20]
29.1 [1.15]
13
Series 26 Pump
Backplate
CL
25.9
[1.02]
Used on Single and

Multiple Pumps
21.1
[.83]
18
[.71]
Driveshaft
Centerline
18
[.71]
Suction Port
Side Porting
Suction Port
Rear Porting
46.2
[1.82]
Pressure Port
Rear Porting
Pressure Port
Side Porting
92.5
[3.64]
48.3
[1.90]
27.7
[1.09]

Used on Single and
Multiple Pumps
63.8
[2.51]
Secondary Pressure
Port Rear Porting
Secondary Pressure
Port Side Porting
Optional Hex Plug

Suction Port
(No Relief Valve)
Rear Porting
79.8
[3.14]
Suction Port
Side Porting
CL
19.3
[.76]
30.2
[1.19]
18
[.71]
1.3
[.05]
38.1
[1.50]
Driveshaft
Centerline
58.2
[2.29]
Priority Pressure
Port Side Porting
Priority Pressure
Port Rear Porting
48.8
[1.92]
55.1
[2.17]
90.9
[3.58]
Right Hand Rotation Shown
14
Relief
Valve
70.1
[2.76]
45.5
[1.79]
Series 26 Pump
Relief Valve Backplate
Adaptor Plate
Used on Single and

Multiple Pumps - Right
Hand Rotation Shown
Used on Multiple Pumps Right Hand Rotation Shown
CL
11.7
[.46]
66
[2.60]
Relief
Valve
18.1
[.71]
21.8
[.86]
CL
39.1
[1.54]
18.1
[.71]
Pressure
Port
Suction Port
Side Porting
Suction Port
Rear Porting
21.1
[.83]
47.8
[1.88]
Tandem Backplate
Driveshaft
Centerline
58.5
[2.31]
Driveshaft
Centerline
Pressure Port
Side Porting
Pressure Port
Rear Porting
Relief Valve
External Drain
7/8-14 SAE
46.2
[1.82]
27.7
[1.09]
52.3
[2.06]
25.9
[1.02]
95.5
[3.76]
Suction
Port
62.7
[2.47]
15,7 [.62]
Used on Single and

Multiple Pumps
SAE AA 2 Bolt Flange
CL
82.5
[3.25]
See Model Code for

Output Shaft Options
48.3
[1.90]
2X 3/8-16
18
[.71]
Driveshaft
Centerline
Pressure
Port
9 tooth 20/40 DP 30
invlt flat root class I
side fit spline SAE J498b
9,7 [.38] min. full spline
Max Torque Rating: 29.5 Nm [261 lbfin]
Suction
Port
46.2
[1.82]
92.5
[3.64]
50.8
[2.00]
20.8
[.82]
15
Series 26 Pump
Model Code Single
Series 26 Gear Pumps can

be ordered by using the following Model Code.
A twenty-four digit coding
system has been designed
to identify the features
presently available on single
gear pumps. The characters
and their relative positions
within the code identify specific features.

Use the Model Code Matrix
as an aid when assembling
the model code for the
pump with the features you
desire. It may be helpful to
photocopy the matrix and
write the numbers and letters into the boxes as you

select features.
All twenty-four digits of the
code must be submitted
when ordering.
All dimensions are in inches.
AC N * * * * * * A 0 0 0 0 0 0 0 0 0 0 0 0 0 A
1, 2, 3
1, 2, 3
26 Series
ACN Gear Pump Single Unit
4 Unit Type
A Plain
B Flow Divider with/without
Relief Valve (Pos. 14-15)
C Relief Valve (Pos. 16-17)
5
Input Rotation (viewed

from input shaft end)
L Left-hand Rotation CCW
R Right-hand Rotation CW
6, 7 Displacement
(cm3/r [in3/r])
01 = 6.6 [.40]
02 = 8.2 [.50]
03 = 9.5 [.58]
04 = 10.8 [.66]
05 = 13.8 [.84]
06 = 16.7 [1.02]
07 = 19.7 [1.20]
08 = 22.5 [1.37]
09 = 24.3 [1.48]
10 = 25.2 [1.54]
11 = 27.7 [1.69]
12 = 29.0 [1.77]
13 = 30.6 [1.87]
8, 9
Input Shaft
AA = 5/8 Inch Dia. 9 Tooth

Spline 16/32 Pitch Shaft
Extension 31.8 [1.25]
AB = 3/4 Inch Dia. 11 Tooth
AC = 3/4 Inch Dia. Straight
Keyed, Keyway 4.8 x 25.4 [.19
x 1.00] Shaft Extension 31.8
[1.25]
AD = 5/8 Inch Dia. Straight
Keyed, Keyway 4.1 X 18.3 [.16
X .72] Shaft Extension 31.8
[1.25]
16
10
6, 7
8, 9
10 11 12, 13 14, 15 16, 17 18 19, 20 21, 22 23 24
Mounting Features
A = SAE 2-Bolt A Flange,

Series 82-2
B = SAE 2-Bolt B Flange,
Series 101-2
D = European 4-Bolt
11
Auxiliary Mounting
Features
0 - No Rear Mounting
C - (2-Bolt AA) SAE Flange
Series 50-2, with 9 Tooth

Internal Spline 20/40 Pitch,
Accepts 25.4 [1.00] Shaft
Extension
12, 13
Ports, Sizes and

Location- Backplate
01 = Plain: Suction Port
1.3125-12 UN-2B SAE O-ring
Port; Pressure Port .875-14
UNF-2B SAE O-ring Port - Side
Sports
UNF-2B SAE O-Ring Port Rear Ports
UNF-2B SAE O-ring Port
Accepts Fittings Per SAE
J1926 - Side Ports
UNF-2B SAE O-ring Port
Accepts Fittings Per SAE
J1926 -Rear Ports
08 = Plain Thru Shaft: Suction
Port 1.0625-12 UN-2B SAE Oring Port; Pressure Port .87514 UNF-2B SAE O-ring Port Side Ports
15 = Relief Valve: Suction Port

UNF-2B SAE O-ring Port - Side
Ports; Drain Port .875-14 UNF2B SAE O-ring Port
UNF-2B SAE O-ring Port - Rear
Ports; Drain Port .875-14 UNF2B SAE O-ring Port
20 = Flow Divider: Suction
Port 1.3125-12 UN-2B SAE
O-ring Port; Priority Pressure
Port .750-16 UNF-2B SAE Oring Port; Secondary Pressure
Port .875-14 UNF-2B SAE Oring Port - Side Ports
Port 1.3125-12 UN-2B SAE
O-ring Port; Priority Pressure
Port .875-14 UNF-2B SAE Oring Port - Rear Ports
14, 15
Priority Flow Divider

Setting (LPM [GPM])
00 = No Flow Setting
AA = 3.8 [1.00]
AD = 7.6 [2.00]
AJ = 11.4 [3.00]
AL = 15.1 [4.00]
AN = 18.9 [5.00]
AR = 22.7 [6.00]
AS = 26.5 [7.00]
AT = 30.3 [8.00]
16, 17
Relief Valve Full Flow

Setting (bar [PSI])
00 = No Relief Valve Setting
AA = 34.5 [ 500]
AB = 51.7 [ 750]
AC = 68.9 [1000]
AE = 86.2 [1250]
AF = 103.4 [1500]
AJ = 120.7 [1750]
AL = 137.9 [2000]
AN = 155.1 [2250]
AP = 172.4 [2500]
AR = 189.6 [2750]
AS = 206.8 [3000]
BR = 241.3 [3500]
BT = 224.1 [3250]
18
Test Data
0 - Generic
A - Unit Specific
(required for flow divider
and relief valve options.)
19, 20 Special Features
00 - No Special Features
AB - Viton Shaft Seal
21, 22
Paint
00 - None
0A - Red Primer
0B - Black
23
Identification
0 - Standard
24
Design Code
A-A
Series 26 Pump
Model Code Multiple
Series 26 Gear Pumps can

The characters and their relative positions within the code

identify specific features.
A thirty-two digit coding system has been designed to

identify the features
presently available on
Multiple gear pumps.


select features.
All thirty-two digits of the
when ordering.
AC M * * * * * * * * * * * * * * * * 0 0 0 0 A 0 0 0 0 0 0 0 B
1, 2, 3
1, 2, 3 26 Series
ACM Gear Pump Multiple Unit
4
Unit Type
A Plain
C Relief Valve
5 Input Rotation (viewed
6, 7
8, 9 10, 11 12, 13 14, 15 16, 17 18, 19 20, 21 22,23 24 25 26 27 ,28 29, 30 31 32
10, 11 Displacement - Rear

(cm3/r [in3/r])
01 = 6.6 [.40]
02 = 8.2 [.50]
03 = 9.5 [.58]
04 = 10.8 [.66]
05 = 13.8 [.84]
06 = 16.7 [1.02]
07 = 19.7 [1.20]
08 = 22.5 [1.37]
09 = 24.3 [1.48]
10 = 25.2 [1.54]
11 = 27.7 [1.69]
12 = 29.0 [1.77]
13 = 30.6 [1.87]
6, 7
Displacement - Front
(cm /r [in3/r])
01 = 6.6 [.40]
02 = 8.2 [.50]
03 = 9.5 [.58]
04 = 10.8 [.66]
05 = 13.8 [.84]
06 = 16.7 [1.02]
07 = 19.7 [1.20]
08 = 22.5 [1.37]
09 = 24.3 [1.48]
10 = 25.2 [1.54]
11 = 27.7 [1.69]
12 = 29.0 [1.77]
13 = 30.6 [1.87]
3
8, 9 Displacement - Ctr.
Triple Only (cm3/r [in3/r])
01 = 6.6 [.40]
02 = 8.2 [.50]
03 = 9.5 [.58]
04 = 10.8 [.66]
05 = 13.8 [.84]
06 = 16.7 [1.02]
07 = 19.7 [1.20]
08 = 22.5 [1.37]
09 = 24.3 [1.48]
10 = 25.2 [1.54]
11 = 27.7 [1.69]
12 = 29.0 [1.77]
13 = 30.6 [1.87]
99 = No Center Displacement
12, 13
Input Shaft

AB = 3/4 Inch Dia. 11 Tooth
AC = 3/4 Inch Dia. Straight
Keyed, Keyway 4.8 x 25.4 [.19 x
1.00] Shaft Extension 31.8 [1.25]
AD = 5/8 Inch Dia. Straight
Keyed, Keyway 4.1 X 18.3 [.16 X
.72] Shaft Extension 31.8 [1.25]
14, 15
Front Adapter Ports
01 = Suction Port 1-5/812

UN-2B SAE O-ring Port;
Pressure Port 7/814 UNF-2B
SAE O-ring Port
SAE O-ring Port
16, 17
Ports - Rear Adapter

(Triple Units)
00 = No Rear Adaptor
SAE O-ring Port
SAE O-ring Port
18, 19 Ports, Sizes and

Location- Backplate

1-5/1612 UN-2B SAE O-ring
Port Size; Pressure Port
7/814 UNF-2B SAE O-ring
PortSide Ports
PortRear Ports
PortSide Ports
PortRear Ports
08 = Plain Tandem: Suction
Port 1.0625-12 UN-2B SAE Oring Port; Pressure Port .87514 UNF-2B SAE O-ring Port Side Ports
Port Size(Plugged); Pressure
Port 7/814 UNF-2B SAE
O-ring PortSide Ports, used
with position 14 and 1501
and 16 and 1710
1-5/1612 UN-2B SAE
O-ringPort Size(Plugged);
SAE O-ring PortRear Ports,
used with position 14 and
1501 and 16 and 1701
18 = Plain Tandem: Suction
Port 1.0625-12 UN-2B SAE Oring Port (Plugged); Pressure
Port .875-14 UNF-2B SAE Oring Port - Side Ports
17
Series 26 Pump
Model Code Multiple
AC M * * * * * * * * * * * * * * * * 0 0 0 0 A 0 0 0 0 0 0 0 B
1, 2, 3
6, 7
8, 9 10, 11 12, 13 14, 15 16, 17 18, 19 20, 21 22,23 24 25 26 27 ,28 29, 30 31 32

Port (Plugged); Pressure Port
Port - Side Ports
20, 21 Priority Flow Divider

Setting (LPM [GPM])
24 Mounting Features
(Front)
A = (2-Bolt A) SAE Flange,

Series 82-3

UNF-2B SAE O-ring Port SIDE Ports; DRAIN Port .87514 UNF-2B SAE O-ring Port
AD = 7.6 [2.00]

UNF-2B SAE O-ring Port - Rear
Ports; DRAIN Port .875-14
UNF-2B SAE O-ring Port - TOP
Port
Port 1.3125-12 UN-2B SAE Oring Port; Priority Pressure
Port .875-14 UNF-2B SAE Oring Port - SIDE Ports
AA = 3.8 [1.00]
AJ = 11.4 [3.00]
AL = 15.1 [4.00]
G = (4-Bolt) European
25
AR = 22.7 [6.00]
Auxiliary Mounting
Features
AS = 26.5 [7.00]
0 = No Rear Mounting
AT = 30.3 [8.00]
C = (2-Bolt AA) SAE Flange

Series 50-2, with 9 Tooth
Internal Spline 20/40 Pitch,
Accepts 25.4 [1.00] Shaft
Extension
AN = 18.9 [5.00]
22,23

Setting (bar [PSI])
AA = 34.5 [500]
AB = 51.7 [750]
AC = 68.9 [1000]
AE = 86.2 [1250]
AF = 103.4 [1500]

Port .875-14 UNF-2B SAE Oring Port - Rear Ports
AJ = 120.7 [1750]

Port .875-14 UNF-2B SAE Oring Port - SIDE Ports
AS = 206.8 [3000]
AL = 137.9 [2000]
AN = 155.1 [2250]
AP = 172.4 [2500]
AR = 189.6 [2750]
Consult your Eaton representative

when requiring common inlet option.
18
C = (2-Bolt B) SAE Flange

Series 82.3
26 Test Data
0 - Generic
A - Unit Specific
27, 28
Special Features
29, 30 Paint
00 - None
0A - Red Primer
0B - Black
31 Identification
0 - Standard
32
Design Code
B-B
Series 26 Pump
Side-Load
Applications
Maximum Allowable
Operating Pressures
Ideal positions shown.

Side load is acceptable
within 90 of either side of
the ideal position. Charts
are based on 100% slack
side tension. Max. speed
per catalog. Max. operating
pressure shown.
Gear Drive
45
45
0
Pump
Inlet
Pump
Inlet
CCW Rotation
CW Rotation
Y
Pulley Drive
Pitch
Dia.
50
50
CCW Rotation
CW Rotation
0
Pump
Inlet
0.40/0.50 CID
0
Pump
Inlet
0.58/0.66 CID
PULLEY
10
12
PULLEY
10
12
GEAR PITCH
GEAR PITCH
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
2250
2250
2500
2500
2750
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
Y Dimension
2.0
1.5
1.0
0.5
0
Y Dimension
.84 CID
2.0
1.5
1.0
0.5
0
1.02 CID
PULLEY
10
12
PULLEY
10
12
GEAR PITCH
GEAR PITCH
1750
1750
2000
2000
2250
2500
2750
2750
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
1250
1250
1250
1500
1500
2000
2000
2000
2250
2250
2250
2500
2500
2500
2750
2500
2750
2750
2750
3000
2750
3000
3000
3000
3000
3000
3000
3000
3000
3000
Y Dimension
2.0
1.5
1.0
0.5
0
Y Dimension
2.0
1.5
1.0
0.5
0
19
Series 26 Pump
Side-Load
Applications
Maximum Allowable
Operating Pressures
Ideal positions shown.

Side load is acceptable
within 90 of either side of
the ideal position. Charts
are based on 100% slack
side tension. Max. speed
per catalog. Max. operating
pressure shown.
Y
Pitch
Dia.
1.20 CID
1.69 CID
PULLEY
10
12
PULLEY
10
12
GEAR PITCH
GEAR PITCH
N/R
N/R
N/R
N/R
N/R
N/R
N/R
N/R
1250
1250
1250
1250
1250
1250
1500
1500
1500
1500
1500
1750
1500
1500
1750
1750
1750
1750
1750
1750
1750
2000
Y Dimension
2.0
1.5
1.0
0.5
0
Y Dimension
N/R
N/R
N/R
1250
1250
1500
1500
1750
1750
1750
2000
2000
2000
2250
2250
2250
2250
2250
2250
2500
2250
2500
2500
2500
2750
2500
2500
2500
2750
3000
1.37 CID
2.0
1.5
1.0
0.5
0
1.77/1.87 CID
PULLEY
10
12
PULLEY
10
12
GEAR PITCH
GEAR PITCH
N/R
N/R
N/R
N/R
N/R
N/R
N/R
N/R
N/R
N/R
N/R
1250
1250
1250
1250
1250
1250
1250
1500
1500
1500
1500
1500
1500
1750
1500
1500
1500
1750
1750
Y Dimension
2.0
1.5
1.0
0.5
0
Y Dimension
N/R
N/R
N/R
N/R
N/R
1250
1250
1500
1500
1500
1750
1750
1750
1750
1750
2000
2000
2000
2000
2000
2000
2000
2250
2250
2250
2250
2250
2250
2250
2500
PULLEY
10
12
GEAR PITCH
N/R
N/R
N/R
N/R
N/R
N/R
1250
1250
1250
1500
1250
1500
1500
1500
1750
1500
1750
1750
1750
2000
1750
1750
2000
2000
2000
2000
2000
2000
2000
2250
1.48/1.54 CID
Y Dimension
2.0
1.5
1.0
0.5
0
20
2.0
1.5
1.0
0.5
0
Series 26 Pump
Load Sensing
Priority Valve
The Load Sensing

PriorityValve is used with
the open loop load sense
systemsthat are typically
used in steering and braking
circuits. The load sense gear
pump provides metered priorityflow (CF)on demand.
The excess flow (EF)is available for auxiliary circuits.The

response time was selectedto insure that the operator
will not sense a delay or
steering kickduring transient conditions.
VALVE SPECIFICATIONS
Rated Pressure
Rated Inlet Flow
Maximum Controlled Flow (CF)
Bias Pressure
Relief Pressure
Response Time
CF Flow Variation over full pressure range
207 BAR (3000PSI)

108 L/m (28GPM)
33 L/m(8.5 GPM)
Dynamic - 10 bar (150 PSI) Std.
Static - 6.9 bar (100 PSI) Std.
34.5-207 bar (500-3000 PSI)
70 msec. max. (std. bias spring)
+/- 10%
PUMP SPECIFICATIONS
Displacements
Mounting
Ports
Type
9 Available: 8.2cm3/r [.50 in3/r] thru 30.6 cm3/r [1.87in3/r]

SAE 2-Bolt A Mount
SAE 2-Bolt B Mount
4-Bolt European Mount (80mm Pilot)
Side or Rear
Single or Multiple Configuration
21
Series 26 Motor
General
Specifications
Rotation
Mounting Flange
Max. Continuous Pressure
Max. Intermittent Pressure
Maximum Rotating Torque at 0 Pressure
Maximum Continuous Operating Temperature
Minimum Continuous Oil Viscocity
Maximum Inlet Vacuum at Operating Condition
Maximum Thrust Load
Maximum Seal Pressure
Bi-Rotation
SAE A 2 Bolt
210 bar [3000 PSI]*
240 bar [3500 PSI]**
750 RPM
4 Nm [36 lb-in]
105C [220F]
5.7 cSt [45 SUS]
-29C [-20F]
0,8 bar Abs. [11.6 psi Abs.]
50 lbs.
150 PSI, 200 PSI @ 1500 RPM
Continuous - motor may be run continuously at these ratings.
Intermittent - intermittent operation, 10% of every minute.

*
31.8 cm3/rev. [1.94 in3/rev.] displacement max. continuous pressure is 190 bar [2750 PSI].
** 31.8 cm3/rev. [1.94 in3/rev.] displacement max. intermittent pressure is 224 bar [3250 PSI].

Rated Speed (RPM)
Minimum Output Flow at Continuous
Rated Speed and Pressure LPM [GPM]
Input Power at Intermittent Rated
Speed and Pressure kW [HP]

Rated Speed (RPM)
Minimum Output Flow at Continuous
Rated Speed and Pressure LPM [GPM]
Input Power at Intermittent Rated
Speed and Pressure kW [HP]
7,0
[.43]
241
[3495]
3600
22,2
[5.9]
11,9
[16.0]
8,8
[.54]
241
[3495]
3600
27,9
[7.4]
15,0
[20.1]
10,1
[.62]
241
[3495]
3600
32,0
[8.5]
17,2
[23.0]
11,6
[.71]
241
[3495]
3600
36,7
[9.7]
19,7
[26.5]
14,5
[.88]
241
[3495]
3600
48,0
[12.7]
24,7
[33.1]
17,3
[1.06]
241
[3495]
3200
50,9
[13.5]
26,2
[35.1]
23,1
[1.41]
241
[3495]
3000
63,8
[16.8]
32,8
[43.9]
25,2
[1.54]
241
[3495]
3000
69,6
[18.4]
35,7
[47.9]
26,0
[1.59]
241
[3495]
3000
71,8
[19.0]
36,9
[49.4]
28,8
[1.76]
241
[3495]
3000
79,5
[21.0]
40,8
[54.8]
30,3
[1.85]
234
[3393]
3000
83,6
[22.1]
41,7
[55.9]
31,7
[1.93]
224
[3248]
3000
87,5
[23.1]
41,8
[56.0]
20,3
[1.24]
241
[3495]
3200
59,8
[15.8]
30,7
[41.2]
The performance data in the table above and the following graphs was collected using a mineral base oil with a viscosity of 133 SUS at 49C [120F].
Catalog Assemblies Cross
Reference
Standard catalog assemblies are
built from high production parts
and are the most economical
pump assemblies available in this
series. The standard assembly
22
order number is a preassigned

part number and may be used to
order the specific standard
assembly (see page 24).
Series 26 Motor
Performance Data
14,2
[.56]
Bottom Drain
92,5 [3.64]
46,2
[1.82]
Dim D Max
2X Dim C
2X Dim A
42,2 [1.66]
21,1 [.83]
Driveshaft
72,0
[2.83] Work
Port
For shaft configuration, see

separate shaft drawing.
18 [.71]
Work Port
Work Port
(optional)
Work Port
(optional)
Case Drain Port - Bottom

(Plugged for Internal Drain Option)
Top Drain
For front mounting

configuration, see separate
front mounting drawing.
92,5 [3.64]
46,2
[1.82]
Dim B
Case Drain Port - Top

(Plugged for Internal
Drain Option)
42,2 [1.66]
21,1 [.83]
35,7
[1.41]
Driveshaft
Work
Port
Work Port
(optional)
Work Port
Work Port
(optional)
DISPLACEMENT
FRONT MOUNT: 2 BOLT SAE A AND B

DIM A
DIM B
DIM C
DIM D
cm3/r [in3/r]
mm [in]
mm [in]
mm [in]
mm [in]
7.0 [.43]
8.8 [.54]
10.2 [.62]
11.6 [.71]
12.5 [.76]
14.6 [.89]
17.4 [1.06]
20.3 [1.24]
23.1 [1.41]
26.1 [1.59]
28.8 [1.76]
31.8 [1.94]
69.2 [2.72]
71.1 [2.80]
72.6 [2.86]
74.3 [2.93]
75.2 [2.96]
77.5 [3.05]
80.7 [3.18]
83.9 [3.30]
87.1 [3.43]
90.3 [3.56]
93.5 [3.68]
96.7 [3.81]
67.9 [2.67]
69.8 [2.75]
71.3 [2.81]
73.0 [2.88]
74.0 [2.91]
76.2 [3.00]
79.4 [3.13]
82.6 [3.25]
85.8 [3.38]
89.0 [3.51]
92.2 [3.63]
95.4 [3.76]
89.0 [3.50]
90.9 [3.58]
92.4 [3.64]
94.1 [3.71]
95.1 [3.74]
97.3 [3.83]
100.5 [3.96]
103.7 [4.08]
106.9 [4.21]
110.1 [4.34]
113.3 [4.46]
116.5 [4.59]
96.6 [3.80]
98.5 [3.88]
100.0 [3.94]
101.7 [4.01]
102.7 [4.04]
104.9 [4.13]
108.1 [4.26]
111.3 [4.38]
114.5 [4.51]
117.7 [4.64]
120.9 [4.76]
124.1 [4.89]
23
Series 26 Motor
Model Code Single
Series 26 Gear Motors can

A twenty-four digit coding
to identify the features
presently available on single
gear pumps. The characters
and their relative positions
within the code identify specific features.


select features.
All twenty-four digits of the
when ordering.
ADM * * ** ** A 00 00 0 00 0 00 00 0 A
1, 2, 3
1, 2, 3
26 Series
ADM Gear Motor
4
Unit Type
A Plain
5
Output Rotation
D Bi-Directional
6, 7
Displacement
(cm3/r [in3/r])
01 = 7.0 [.43]
02 = 8.8 [.54]
03 = 10.2 [.62]
04 = 11.6 [.71]
05 = 14.6 [.89]
06 = 17.4 [1.06]
07 = 20.3 [1.24]
08 = 23.1 [1.41]
09 = 25.2 [1.54]
10 = 26.1 [1.59]
11 = 28.8 [1.76]
12 = 30.3 [1.85]
13 = 31.8 [1.94]
8, 9
6, 7
8, 9
10 11, 12 13, 14 15 16, 17 18 19, 20 21, 22 23 24
Output Shaft
AA = 9 Tooth Spline 16/32

Spline, Min. Full Spline 22.4
[.88], Shaft Extension 31.8
[1.25]
AB = 11 Tooth Spline 16/32
Spline, Min. Full Spline 22.4
[.88], Shaft Extension 31.8
[1.25]
AC = Straight Shaft Dia 19.05
[.750], Keyway 4.8 x 25.4 [.19
x 1.00], Shaft Extension 31.8
[1.25] (Key Included)
AD = Straight Shaft Dia 15.88
[.625], Keyway 4.1 x 18.3 [.16
x .72], Shaft Extension 31.8
[1.25] (Key Included)
AJ = Dia 15.88 [.625], Taper
.125:1, .500-20 UNF-2A,
Keyway 4.1 x 17.5 [.16 x .69],
Shaft Extension 43.7 [1.72]
(Key Included)
10
Mounting Features
A = 2-Bolt A - SAE Flange

Series 82-2
11, 12
Ports, Sizes and

Location- Backplate
Relief Valve Setting

bar [lbf/in2]
01 = Inlet Port 1.0625-12

UN-2B SAE O-Ring Port;
Outlet Port 1.0625-12 UN-2B
SAE O-Ring Port - Side Ports
02 = Inlet Port 1.0625-12

Outlet Port 1.0625-12 UN-2B
SAE O-Ring Port - Rear Ports
AC = 31.0 [450]
03 = Inlet Port .875-14

Outlet Port .875-14 UN-2B
SAE O-Ring Port - Side Ports
04 = Inlet Port .875-14
Outlet Port .875-14 UN-2B
SAE O-Ring Port - Rear Ports
13, 14
Case Drain
00 = No Case Drain
AA = .5625-18 UNF-2B SAE
O-Ring Port - Bottom
AB = .5625-18 UNF-2B SAE
O-Ring Port - Top
AC = Internal with
Bi-Directional Checks,
.5625-18 UNF-2B SAE
O-Ring Port - Plugged
AD = .5625-18 UNF-2B SAE
O-Ring Port - Bottom-Plugged
AE = .5625-18 UNF-2B SAE
O-Ring Port - Top-Plugged
15
Relief Valve Type
0 = No Relief Valve
C = Cross-over
24
16, 17
AA = 117.2 [1700]
AB = 141.3 [2050]
18
Test Data
0 - Generic
A - Unit Specific
(Used with Relief Valve)
19, 20
Special Features
21, 22
Paint
00 - None
0A - Primer per Spec 209-13A
0B - Black per Spec 209-13B
23
Identification
0 - Standard
24
Design Code
A-A
Series L2 Pump
General
Specifications
and Performance
Data
Rotation
Mounting Flange
Maximum Continuous Pressure
Maximum Intermittent Pressure
Maximum Continuous Inlet Temperature
Maximum Inlet Vacuum at 82C [180F] and Rated Speed
CCW or CW
SAE 2 Bolt B
248 bar [3600 PSI]*
276 bar [4000 PSI]**
750 RPM
107C [225F]
-29C [-20F]
6.0 In. Hg

Intermittent - Intermittent operation, 10% of every minute.
* 46.7 [2.85] displacement maximum continuous pressure is 224 bar [3250 PSI]
51.1 [3.12] displacement maximum continuous pressure is 207 bar [3000 PSI]
55.2 [3.37] displacement maximum continuous pressure is 190 bar [2750 PSI]
** 46.7 [2.85] displacement maximum intermittent pressure is 252 bar [3650 PSI]
51.1 [3.12] displacement maximum intermittent pressure is 234 bar [3400 PSI]
55.2 [3.37] displacement maximum intermittent pressure is 217 bar [3150 PSI]
MODEL
25500
25501
25502
25503
25504
25505
25506
25507
25508
21.3
[1.30]
248
[3600]
276
[4000]
3500
61,3
[16.2]
27.5
[36.9]
25.4
[1.55]
248
[3600]
276
[4000]
3000
64,7
[17.1]
27.5
[36.9]
29.2
[1.78]
248
[3600]
276
[4000]
3000
78,0
[20.6]
31.1
[41.7]
33.6
[2.05]
248
[3600]
276
[4000]
2750
83,3
[22.0]
35.3
[47.3]
38.2
[2.33]
248
[3600]
276
[4000]
2750
94,6
[25.0]
39.5
[53.0]
42.8
[2.61]
248
[3600]
276
[4000]
2500
96,1
[25.4]
39.6
[53.1]
46.7
[2.85]
224
[3250]
252
[3650]
2500
105,2
[27.8]
42.4
[56.8]
51.1
[3.12]
207
[3000]
234
[3400]
2500
115,1
[30.4]
49.4
[66.2]
55.2
[3.37]
190
[2750]
217
[3150]
2250
112,0
[29.6]
48.2
[64.7]
Max. Continuous Pressure bar [PSI]

Rated Speed (RPM)
The performance data in the table above and the following graphs was collected using a mineral base oil with a viscosity of 133 SUS at 49 C [120 F]. The following performance
graphs are representative of the series.
Intermittent - Intermittent operation, 10% of every minute.
Optional Configurations
Standard Catalog Assemblies
Besides the Standard Catalog

Assemblies, the L2 Series has
several optional features. Flow
divider and tandem backplates
are available. Multiple gear
pumps can also be built. If a variation from the Standard Catalog
Assemblies is required, use the
model codes on pages 35-36.
Standard Catalog Assemblies are

built from high quality production
parts and are the most economical pumps available in this series.
Dimensions and order numbers
for Standard Catalog Assemblies
are given on pages 29-30.
25
Series L2 Pump
Performance Data
Charts
Output Flow vs Speed
55.2 [3.37]
(LPM [GPM]
Output Flow at
69 Bar [1000 PSI]
120
[32]
51.1 [3.12]
46.7 [2.85]
42.8 [2.61]
38.2 [2.33]
33.6 [2.05]
29.2 [1.78]
25.4 [1.55]
90
[24]
60
[16]
21.3 [1.30]
30
[8]
0
500
750
1000
1500
2000
2500
Input Speed
(RPM)
55.2 [3.37]
(LPM [GPM]
Output Flow at
207 Bar [3000 PSI]
120
[32]
3000
3500
Displacement
cm3 /r [in 3 /r]
51.1 [3.12]
46.7 [2.85]
42.8 [2.61]
38.2 [2.33]
90
[24]
33.6 [2.05]
29.2 [1.78]
25.4 [1.55]
60
[16]
21.3 [1.30]
30
[8]
0
500
26
750
1000
1500
2000
2500
3000
3500
Series L2 Pump
Performance Data
Charts
Input Power vs Speed
Input Power at
69 Bar [1000 PSI]
(kW [HP])
55.2 [3.37]
51.1 [3.12]
46.7 [2.85]
42.8 [2.61]
38.2 [2.33]
33.6 [2.05]
29.2 [1.78]
25.4 [1.55]
15
[20]
10
[13]
21.3 [1.30]
5
[7]
0
500
750
1000
1500
2000
2500
3000
Input Speed
(RPM)
Displacement
cm 3 /r [in 3 /r]
50
55.2 [3.37]
[67]
51.1 [3.12]
46.7 [2.85]
42.8 [2.61]
38.2 [2.33]
33.6 [2.05]
29.2 [1.78]
40
[54]
Input Power at
207 Bar [3000 PSI]
(kW [HP])
3500
30
25.4 [1.55]
[40]
21.3 [1.30]
20
[27]
10
[13]
0
500
750
1000
1500
2000
2500
3000
3500
Input Speed
(RPM)
The performance data show in the graphs are representative of this series. Tests were performed
per SAE specifications using mineral base oil with a viscosity of 133 SUS at 49 C [120 F].
27
Series L2 Pump
Standard Catalog
Assemblies Dimensions
177.8
[7.00]
146
[5.75]
9.7
[.38]
Pressure Port
Side Porting
Driveshaft
Centerline
OUT
IN
27.7
[1.09]
81.8
[3.22]
17.5
[.69]
Pressure Port
Rear Porting
CL
Suction
Port
Rear
Porting
Suction
Port
Side
Porting
See Shaft
Drawing
59.9
[2.36]
Dia.
101.57 0.03
[3.999 .001]
22.4
[.88]
104.4
[4.11]
2X Dia.
14.5 0.13
[.572 .005]
27.7
[1.09]
75.4
[2.97]
CL
2X Dim A
Dim B

For split flange porting subtract .8 [.03], available in side porting only
MODEL
25500
25501
25502
25503
25504
25505
25506
25507
25508
Displacement (cm3/r [in3/r]) 21.3 [1.30] 25.4 [1.55] 29.2 [1.78] 33.6 [2.05] 38.2 [2.33] 42.8 [2.61] 46.7 [2.85] 51.1 [3.12] 55.2 [3.37]
Dimension A (mm [in.])
84.8 [3.34] 88.2 [3.47] 91.7 [3.61] 95.1 [3.75] 98.6 [3.88] 102.0 [4.02] 105.3 [4.14] 109.0 [4.29] 112.4 [4.43]
Dimension B (mm [in.])
117.3 [4.62] 120.8 [4.75] 124.2 [4.89] 127.7 [5.03] 131.1 [5.16] 134.6 [5.30] 137.8 [5.42] 141.5 [5.57] 145.0 [5.71]

170 Nm [1500 lb-in]
[.97] [.978.004]
+0.05
4.1
6.30 -0.03
[.16]
[ .248+0.02
-0.01]

209 Nm [1850 lb-in]
13 Tooth 16/32
DP 30 Involute
Flat Root Class 1
Side Fit Spline
SAE J498b

316 Nm [2800 lb-in]
Dia.
22.2220.003
[.8749.0001
* Multiple pump input torque limitations:

The total torque for multiple pump displacements and
pressure combinations cannot exceed the maximum
input torque rating of the shaft. The proper formula is
Pressure times Displacement divided by 6.28.
6
28
41.1
[1.62]
41 Tooth 48/96 DP 45
Involute Fillet Root Class 1
Side Fit Spline
13 [.51] Min Full Spline

24.9 [.98]
Series L2 Pump
Order Numbers
RIGHT HAND
ROTATION
PRODUCT NO
LEFT HAND
ROTATION
PRODUCT NO
SHAFT
Model 25500 21.3 cm3/r [1.30 in3/r] Displacement

25500-RSA
25500-LSA
13 T Spline
25500-RSB
25500-LSB
13 T Spline
25500-RSC
25500-LSC
7/8 Keyed
25500-RSD
25500-LSD
7/8 Keyed
25500-RSE
25500-LSE
13 T Spline
25500-RSF
25500-LSF
7/8 Keyed
25501-RSA
25501-LSA
13 T Spline
25501-RSB
25501-LSB
13 T Spline
25501-RSC
25501-LSC
7/8 Keyed
25501-RSD
25501-LSD
7/8 Keyed
25501-RSE
25501-LSE
13 T Spline
25501-RSF
25501-LSF
7/8 Keyed
25502-RSA
25502-LSA
13 T Spline
25502-RSB
25502-LSB
13 T Spline
25502-RSC
25502-LSC
7/8 Keyed
25502-RSD
25502-LSD
7/8 Keyed
25502-RSE
25502-LSE
13 T Spline
25502-RSF
25502-LSF
7/8 Keyed
25503-RSA
25503-LSA
13 T Spline
25503-RSB
25503-LSB
13 T Spline
25503-RSC
25503-LSC
7/8 Keyed
25503-RSD
25503-LSD
7/8 Keyed
25503-RSE
25503-LSE
13 T Spline
25503-RSF
25503-LSF
7/8 Keyed
25504-RSA
25504-LSA
13 T Spline
25504-RSB
25504-LSB
13 T Spline
25504-RSC
25504-LSC
7/8 Keyed
25504-RSD
25504-LSD
7/8 Keyed
25504-RSE
25504-LSE
13 T Spline
25504-RSF
25504-LSF
7/8 Keyed
PORT
LOCATION
SAE PRESSURE
PORT SIZE
SAE SUCTION
PORT SIZE
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
29
Series L2 Pump
Order Numbers
RIGHT HAND
ROTATION
PRODUCT NO
LEFT HAND
ROTATION
PRODUCT NO
SHAFT

25505-RSA
25505-LSA
13 T Spline
25505-RSB
25505-LSB
13 T Spline
25505-RSC
25505-LSC
7/8 Keyed
25505-RSD
25505-LSD
7/8 Keyed
25505-RSE
25505-LSE
13 T Spline
25505-RSF
25505-LSF
7/8 Keyed
25506-RSA
25506-LSA
13 T Spline
25506-RSB
25506-LSB
13 T Spline
25506-RSC
25506-LSC
7/8 Keyed
25506-RSD
25506-LSD
7/8 Keyed
25506-RSE
25506-LSE
13 T Spline
25506-RSF
25506-LSF
7/8 Keyed
25507-RSA
25507-LSA
13 T Spline
25507-RSB
25507-LSB
13 T Spline
25507-RSC
25507-LSC
7/8 Keyed
25507-RSD
25507-LSD
7/8 Keyed
25507-RSE
25507-LSE
13 T Spline
25507-RSF
25507-LSF
7/8 Keyed
25508-RSA
25508-LSA
13 T Spline
25508-RSB
25508-LSB
13 T Spline
25508-RSC
25508-LSC
7/8 Keyed
25508-RSD
25508-LSD
7/8 Keyed
25508-RSE
25508-LSE
13 T Spline
25508-RSF
25508-LSF
7/8 Keyed
30
PORT
LOCATION
SAE PRESSURE
PORT SIZE
SAE SUCTION
PORT SIZE
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Side
Rear
Side
Rear
Side
Side
1-1/16-12
1-1/16-12
1-1/16-12
1-1/16-12
3/4 Split Flange
3/4 Split Flange
1-5/8-12
1-5/8-12
1-5/8-12
1-5/8-12
1-1/4 Split Flange
1-1/4 Split Flange
Series L2 Pump
Optional
Configurations
The L2 Series gear pump
components can be assembled into many optional configurations. The versatile
design allows you to assemble a pump to meet your
specific needs.
Model codes for single and

multiple pumps along with
the component part dimension drawings are given on
the following pages.
Single Gear Pump with

Spilt- Flange Ports
Double
GearGear
Pump
withwith
Double
Pump
Common
Suction
Port Port
Common
Suction
Single Gear Pump

with Flow Divider
Double
GearGear
Pump
Double
Pump
withwith
FlowFlow
Divider
Divider
Single Gear Pump with SAE

A Flange Auxiliary Mount
Triple Gear Pump with

Two Suction Ports
Triple Gear Pump

with Flow Divider
Double Gear Pump with Common Suction

Port and SAE A Flange Auxiliary Mount

Ports and SAE A Flange Auxiliary Mount
31
Series L2 Pump
Front Plate
SAE 2 Bolt B Mount.
17.5
[.69]
146
[5.75]
9.7
[.38]
Used on all Standard

Catalog Assemblies.
177.8
[7.00]
57.2
[2.36]
Dia.
101.570.03
[3.999.001]
2X Dia.
14.50.13
[.572.005]
40.1
[1.58]
Body
99.5
[3.92]
CL
Displacement
cm3/r [in3/r]
21.3 [1.30]
25.4 [1.55]
29.2 [1.78]
33.6 [2.05]
38.2 [2.33]
42.8 [2.61]
46.7 [2.85]
51.1 [3.12]
55.2 [3.37]
Used on Single and

Multiple Pumps
Dimension A
mm [in.]
19.8 [.78]
23.1 [.91]
26.7 [1.05]
30.0 [1.18]
1.32 [33.5]
37.1 [1.46]
1.59 [40.4]
43.9 [1.73]
47.5 [1.87]
Dim A
Used on Single and

Multiple Pumps
Pressure Port
Rear Porting
Suction
Port
Rear
Porting
IN
OUT
Backplate
Suction
Port
Side
Porting
27.7
[1.09]
81.8
[3.22]
CL
27.7
[1.09]
75.4
[2.97]
Pressure Port
Side Porting
Drive C
Shaft L
22.4
[.88]
25.1
[.99]
57.7
[2.27]

For split flange porting subtract .8 [.03], available in side porting only
32
Series L2 Pump
Optional Hex Plug

(No Relief Valve)

Used on Single and
Multiple Pumps
101.1
[3.98]
1.5
[.06]
Priority Pressure
Port Rear Porting
76.5 21.3
[3.01] [.84]
Max.
1.5
[.06]
Drive
Shaft
46.2
[1.82]
22.4
[.88]
Suction Port
Side Porting
Suction Port
Rear Porting
Priority
Pressure
Port Side
Porting
Secondary
Pressure
Port Rear
Porting
29.5
[1.16]
65
[2.56]
25.4
[1.00]
68.3
CL [2.69]
52.1
[2.05]
80.3
[3.16]
93.5
[3.68]
80.0
[3.15]
CL
Secondary
Pressure
Port Side
Porting
Top View
33
Series L2 Pump
Tandem Backplate with

SAE 2 Bolt A Flange
Spacer
Used with 11 Tooth Spline
Output Shaft
Used on Single and

Multiple Pumps
See Model Code for

Output Shaft Options
2X 3/8-16 UNC-2B
23.8 [.94] Min.
Full Thread Depth
106.4
[4.19]
Pressure Port
Drive
Shaft
106.4
[4.19]
36.8
[1.45]
CL
22.4
[.88]
43.2
[1.70]
Suction
Port
86.9
[3.42]
CL
86.9
[3.42]
24.9
[.98]
57.9
[2.28]
For split flange porting subtract .8 [.03]
Adaptor Plate
Used on Multiple Pumps
Drive C
Shaft L
22.4
[.88]
Pressure Port
Suction
Port
76.2
[3.00]
CL
82.6
[3.25]
30.2
[1.19]
60.5
[2.38]

For split flange porting subtract .8 [.03]
34
Series L2 Pump
Model Code Single
L2 gear pumps can be

ordered by using the following Model Code.
A twenty-three digit coding
system has been designed to
identify all of the features available on L2 single gear pumps.
The characters and their relative positions within the code

select features.
All twenty-three digits of the

when ordering. The seven
zeros at the end of the
model code are for factory
use, be sure to include
them when ordering.
ABF * * ** ** ** ** ** * 0 00 00 0 0
1, 2, 3
1, 2, 3
L2 Series
ABF Gear Pump Single Unit
4 Unit Type
A Plain
5

6, 7
Displacement
(cm3/r [in3/r])
00 = 21.3 [1.30]
01 = 25.4 [1.55]
02 = 29.2 [1.78]
03 = 33.6 [2.05]
04 = 38.2 [2.33]
05 = 42.8 [2.61]
06 = 46.7 [2.85]
07 = 51.1 [3.12]
08 = 55.2 [3.37]
8, 9
Input Shaft

AB = 7/8 Inch Dia. Straight
X 1.00] Shaft Extension 41.1
[1.62]
AD = 7/8 Inch Dia. 41 Tooth
Extension 24.9 [.98]
6, 7
8, 9
10, 11 12, 13 14, 15 16 17 18, 19 20, 21 22 23
10, 11
Ports, Sizes and

Location- Backplate

Setting (bar [PSI])
01 = 1 5/8-12 Suction; 1 1/1612 Pressure SAE Straight

Thread O-ring Ports - Side

Thread O-ring Ports - Rear
14, 15
AA = 34.5 [500]
AC = 68.9 [1000]
AD = 86.2 [1250]
AE = 103.4 [1500]
04 = 1 5/8-12 Suction; 7/8-14

Priority Pressure; 1 1/16-12
Secondary Pressure SAE
Straight Thread O-ring Ports Side
AG = 137.9 [2000]
05 = 1 5/8-12 Suction; 7/8-14

Straight Thread O-ring Ports Rear
AL = 206.8 [3000]
Priority Flow Divider

Setting (LPM [GPM])
AA = 3.8 [1.00]
AB = 5.7 [1.50]
AC = 7.6 [2.00]
AD = 9.5 [2.50]
AE = 11.4 [3.00]
AF = 13.3 [3.50]
Test Data
0 - Generic
A - Unit Specific
AB = 51.7 [750]
03 = 1 1/4 Suction; 3/4

Pressure Split Flange Ports Side
12, 13
17
AF = 120.6 [1750]
AH = 155.1 [2250]
AJ = 172.4 [2500]
AK = 189.6 [2750]

20, 21
Paint
00 - None
0A - Red Primer
0B - Black
22
Identification
0 - Standard
23
16
Auxiliary Rear Mount
Design Code
A-A
0 = None
B = 2 Bolt A SAE Flange
Series 82-2 Output Shaft
Accepts 9 Tooth Spline 16/32
Pitch, Shaft Extension 31.8
[1.25]
C = 2 Bolt A SAE Flange
Series 82-2, With 11 Tooth
16/32 Pitch External Spline
Output Shaft, 17.5 [.69]
Minimum Full Spline,
Requires Spacer and Coupler
to Accept 31.8 [1.25] Mating
Shaft Extension
AG = 15.1 [4.00]
AH = 17.0 [4.50]
AJ = 18.9 [5.00]
AK = 20.8 [5.50]
AL = 22.7 [6.00]
AN = 26.5 [7.00]
AP = 30.3 [8.00]
AR = 34.1 [9.00]
AS = 37.8 [10.00]
35
Series L2 Pump
Model Code Multiple
Multiple L2 gear pumps can

A twenty-eight digit coding
to identify all of the features
available on L2 double and
triple gear pumps. The characters and their relative
positions within the code

select features.
All twenty-eight digits of the

when ordering. The six zeros
at the end of the model
code are for factory use, be
sure to include them when
ordering.
ABG * * ** ** ** ** * * ** ** ** * 00 00 0 A
1, 2, 3
1, 2, 3
L2 Series
ABG Gear Pump Multiple Unit
4 Unit Type
A Plain
5

6, 7
Displacement
(cm3/r [in3/r])
00 = 21.3 [1.30]
01 = 25.4 [1.55]
02 = 29.2 [1.78]
03 = 33.6 [2.05]
04 = 38.2 [2.33]
05 = 42.8 [2.61]
06 = 46.7 [2.85]
07 = 51.1 [3.12]
08 = 55.2 [3.37]
8, 9
Displacement of
Center Section (cm3/r [in3/r])
00 = 21.3 [1.30]
01 = 25.4 [1.55]
02 = 29.2 [1.78]
03 = 33.6 [2.05]
04 = 38.2 [2.33]
05 = 42.8 [2.61]
06 = 46.7 [2.85]
07 = 51.1 [3.12]
08 = 55.2 [3.37]
99 = No Center Displacement
10, 11
Displacement of Rear
Section (cm3/r [in3/r])
00 = 21.3 [1.30]
01 = 25.4 [1.55]
02 = 29.2 [1.78]
03 = 33.6 [2.05]
04 = 38.2 [2.33]
05 = 42.8 [2.61]
06 = 46.7 [2.85]
07 = 51.1 [3.12]
08 = 55.2 [3.37]
12, 13
6, 7
8, 9
10, 11 12, 13 14 15 16, 17 18, 19 20, 21 22 23, 24 25, 26 27 28
Input Shaft

AB = 7/8 Inch Dia. Straight
X 1.00] Shaft Extension 41.1
[1.62]
AE = 7/8 Inch Dia. 41 Tooth
Extension 24.9 [.98]
07 = 1 5/8-12 Suction
(Plugged); 1 1/16-12 Pressure
SAE Straight Thread O-ring
Ports - Rear
08 = 1 1/4 Suction; 3/4
Pressure Split Flange Ports Side
18, 19 Priority Flow Divider
Setting (LPM [GPM])
AA = 3.8 [1.00]
14
Front Adaptor Ports

Thread O-ring Ports
3 = 1 1/4 Suction; 3/4
Pressure Split Flange Ports,
Common Suction
AB = 5.7 [1.50]
AC = 7.6 [2.00]
AD = 9.5 [2.50]
AE = 11.4 [3.00]
AF = 13.3 [3.50]
AG = 15.1 [4.00]
15
Rear Adaptor Ports

(triple pumps)
0 = No Rear Adaptor
Thread O-ring Ports
3 = 1 1/4 Suction; 3/4
Pressure Split Flange Ports,
Common Suction
16, 17 Ports, Sizes and
Location- Backplate
AH = 17.0 [4.50]
AK = 20.8 [5.50]
AL = 22.7 [6.00]
AN = 26.5 [7.00]
AP = 30.3 [8.00]
AR = 34.1 [9.00]
AS = 37.8 [10.00]

AA - Viton Shaft Seal
AE = 2 Bolt A SAE Flange
Series 82-2 Output Shaft
Accepts 9 Tooth Spline 16/32
Pitch, Shaft Extension 31.8
[1.25]
AF = 2 Bolt A SAE Flange

Series 82-2, With 11 Tooth
16/32 Pitch External Spline
Output Shaft, 17.5 [.69]
Minimum Full Spline,
Requires Spacer and Coupler
to Accept 31.8 [1.25] Mating
Shaft Extension
25, 26 Paint
00 - None
0A - Red Primer
0B - Black
27 Identification
0 - Standard
28
20, 21

Thread O-ring Ports - Rear

Setting (bar [PSI])
05 = 1 5/8-12 Suction; 7/8-14

Straight Thread O-ring Ports Side
AA = 34.5 [500]
06 = 1 5/8-12 Suction; 7/8-14

Straight Thread O-ring Ports Rear
AE = 103.4 [1500]
Test Data
0 - Generic
A - Unit Specific
AJ = 18.9 [5.00]

AB = 51.7 [750]
AC = 68.9 [1000]
AD = 86.2 [1250]
AF = 120.6 [1750]
AG = 137.9 [2000]
AH = 155.1 [2250]
AJ = 172.4 [2500]
AK = 189.6 [2750]
AL = 206.8 [3000]
36
22
Design Code
A-A
Eaton
Hydraulics Operations USA
14615 Lone Oak Road
Eden Prairie, MN 55344
USA
Tel: 952-937-9800
Fax: 952-294-7722
www.hydraulics.eaton.com
Eaton
Hydraulics Operations Europe
Route de la Longeraie 7
1110 Morges
Switzerland
Tel: +41 (0) 21 811 4600
Fax: +41 (0) 21 811 4601
Eaton
Hydraulics Operations Asia Pacific
11th Floor Hong Kong New World Tower
300 Huaihai Zhong Road
Shanghai 200021
China
Tel: 86-21-6387-9988
Fax: 86-21-6335-3912
2008 Eaton Corporation

All Rights Reserved
Printed in USA
Document No. E-PUGE-MC001-E1
Supersedes E-PUGE-MC001-E
March 2008

Bombas Serie 26000 y 25505

Uploaded by

Copyright:

Available Formats

Bombas Serie 26000 y 25505

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bombas Serie 26000 y 25505

Uploaded by

Copyright:

Available Formats

Gear Pumps and Motors

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

The 13-tooth gears, versus

Improved bearing lubrication system uses inlet oil

The innovative new wear

The Series 26 Gear Pump

The improved trap reliefs

The highly polished shaft

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

Continuous - pump may be run continuously at these ratings.

Intermittent - intermittent operation, 10% of every minute.

Displacement cm3/r [in3/r]

Displacement cm3/r [in3/r]

order number is a preassigned

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

6,5619,68 cm3/rev [.401.20 in3/rev]

6,56 cm3/rev [.40 in3/rev]

8,20 cm3/rev [.50 in3/rev]

9,51 cm3/rev [.58 in3/rev

Flow in L/min. [GPM] @ 138 bar [2000 PSI]

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

10,82 cm3/rev [.66 in3/rev]

16,73 cm3/rev [1.02 in3/rev]

19,68 cm3/rev [1.20 in3/rev]

13,78 cm3/rev [.84 in3/rev]

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

Flow in L/min. [GPM] @ 138 bar [2000 PSSI]

22,47 cm3/rev [1.37 in3/rev]

25,56 cm3/rev [1.54 in3/rev]

30,67 cm3/rev [1.87 in3/rev]

29,03 cm3/rev [1.77 in3/rev]

27,72 cm3/rev [1.69 in3/rev]

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

* Multiple pump input

rating of the shaft.

All dimensions are in mm [in].

Left Hand Rotation Shown

Displacement (cm3/r [in3/r])

Displacement (cm3/r [in3/r])

5/8 Inch 9 Tooth Spline

3/4 Inch 11 Tooth Spline

3/4 Inch Straight Key

5/8 Inch Straight Key

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

* 5/8 9 T Spline has a maximum allowable input torque of 62 Nm [550 lb-in].

Model 26001 6,6 cm /r [.40 in /r] Displacement

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

* 5/8 9 T Spline has a maximum allowable input torque of 62 Nm [550 lb-in].

Model 26007 19,7 cm /r [1.20 in /r] Displacement

EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008

Single Gear Pump with

Double Gear Pump with

Triple Gear Pump with Two Suction

Model codes for single and

Single Gear Pump

Double Gear Pump with

Triple Gear Pump with

Single Gear Pump

Triple Gear Pump with Two Suction

Double Gear Pump