Paradise Datacom RF7 Series X-Band LNA Data Sheet 200415 RevL

RF7 Series
X-Band LNA
7.25 - 7.75 GHz
Description
The RF7 Series X-Band Low Noise Amplifier (LNA) offers
premium performance and reliability in the most versatile
package available for a X-Band LNA.
The latest technology in GaAs HEMT devices produces the
lowest possible noise temperatures in an uncooled LNA.
In addition, the RF7 Series LNA is backed by a 36-month
warranty and by more than 30 years experience in the design
of high performance communications amplifiers.
The performance of the RF7 Series LNA is matched by a full
range of features chosen with the communication system
designer in mind.
From the compact weatherproof housing to the standard
combination of RF cable and circular connector DC input, the
RF7 Series LNA is ready for integration into your system.
Teledyne Paradise Datacom LLC

328 Innovation Blvd.
State College, PA 16803 USA
Tel: (814) 238-3450
Fax: (814) 238-3829
1 OF 4
www.paradisedata.com
FEATURES
Noise Temperatures
as low as 45K
Embedded inter-stage
transmit reject filter
36-Month Warranty
Input and Output Isolators
+12 to +28 VDC Operation
Cable Power Standard in
addition to the DC
Connector
Waterproof, Painted
Aluminum Housing
Voltage Surge Protection
Reverse Voltage
Protection
Pressurizable Feed
OPTIONS
Universal AC Power
Supply
Fault Alarm (Current
Sensing)
SPECIFICATIONS
1:1 Redundant LNA
System
1:2 Redundant LNA
System
Teledyne Paradise Datacom Ltd.

2&3 The Matchyns, London Road, Rivenhall End
Witham, Essex CM8 3HA, United Kingdom
Tel: +44(0) 1376 515636
Fax: +44(0) 1376 533764
200415 REV L
ECO 17750
RF7 Series
X-Band LNA
7.25 - 7.75 GHz
Electrical
PARAMETER
NOTES
Frequency Range
LIMITS
UNITS
7.250 to 7.750
GHz
Noise Temperature
(See configuration matrix)
45 to 70
K @ +23 C ambient
Gain
50 dB optional
(See configuration matrix)
Full band
Per 40MHz
60 (min.)
dB
0.50 (max.)
0.20 (max.)
0.10 (max.)
0.20 (max.)
0.20 (max.)
dB
dB/40 MHz
dB/hour
dB/24 hours
dB/month
+10
dBm
+20
dBm
Gain Flatness
Gain Slope
Gain Stability vs. Time
Output Power @ 1dB Gain

Compression (P1dB)
Output Third Order Intercept
Point
Measured with two tone input;

each tone @ -65 dBm input
Input/Output VSWR
Input Overdrive
Out-of-Band Susceptibility
Group Delay
Linear
Parabolic
Ripple
1.25:1(max.)
(Maximum level)
dBm CW
Amplifier will tolerate while

remaining specification-compliant
-30 (max)
dBm CW input;
in 7.9 to 8.4 GHz band
0.05
0.005
1.0
ns/MHz
ns/MHz2
ns peak-to-peak
Per 40 MHz
0.05 (max.)
+12 to +28
185
VDC
mA
Contact factory for mechanical

outline drawing
100 - 240
47 - 440
VAC
Hz
width X length X height
3.38 X 10.70 X 1.93

86 X 272 X 49
in.
mm.
Weight
lbs.
Finish
Paint
White; epoxy enamel
AM/PM Conversion
Primary Power
Voltage
Current, typical
Optional AC Power Supply
@ -10 dBm output power

(See configuration matrix for
available options)
(+ 15 VDC for fault option)
/dB
Mechanical
Size
Feed Pressure
Connectors
2
RF Input
RF Output (standard)
RF Output (option)
DC/Fault (option)
PSI
1
WR112 Waveguide
SMA
Type N2
6-pin MS2
6-pin MS mate
CPR112G flange
Female
Female
MS3112E10-6P
MS3116F10-6S
1 Use supplied full (for mating with a grooved flange) or half (for mating with a flat flange) gasket to ensure a weatherproof seal.
2 Cover connectors with electrical putty or tape to ensure a weatherproof seal.
Environmental
Operating Temperature
Ambient
-40 to +60
Storage Temperature
Ambient
-40 to +70
Condensing
100
Relative Humidity
2 OF 4
200415 REV L
ECO 17750
RF7 Series
X-Band LNA
7.25 - 7.75 GHz
OUTLINE DRAWINGS
Standard
DC Input Power
Optional
AC Input Power
3 OF 4
X-Band LNA
RF 7500
X-Band LNA
RF 7500
200415 REV L
ECO 17750
RF7 Series
X-Band LNA
7.25 - 7.75 GHz
PRIME POWER / ALARM INTERFACE
-48VDC POWER
Option A3
AC POWER
Option A1
ALARM
Option F1
ALARM / AC POWER
Option A1F1
PIN
STANDARD
+12 to +28 VDC
-18 to -64 VDC
+15 to +28 VDC
100 to 240 VAC LINE
100 to 240 VAC LINE
GROUND
-18 to -64 VDC RTN
GROUND
AC GROUND
AC GROUND
GROUND
GROUND
GROUND
100 to 240 VAC RTN.
100 to 240 VAC RTN.
NC
NC
OPEN ON FAULT
NC
OPEN ON FAULT
NC
NC
COMMON
NC
COMMON
NC
NC
CLOSED ON FAULT
NC
CLOSED ON FAULT
TECHNICAL NOTES
Gain vs. Ambient Temperature Coefficient
-0.04 dB/C for Units with 50 dB Gain

-0.05 dB/C for Units with 60 - 75 dB Gain
Noise Temperature vs. Ambient Temperature
De-rate noise temperature by 0.33K/C for ambient

temperatures over +23 C
X-Band LNA Configuration Matrix

R
Noise Temperature (K)

45
55
65
50
60
70
50
60
Gain (dB)
SP=Custom
Input Voltage
XX - +12 to +28 VDC* (Cable Power or Cir. Mil.)
A1 - 100-240 VAC, 47-440 Hz (Cir. Mil. Only)
A3 - -18 to -64 VDC (Cir. Mil. Only)
Special Notes
XX - None (SMA(F) RF Output)
XN - Type N(F) Output
CR1 - Cable Power w/ Internal Bias Tee
(w/o MS Connector power entry)
with Type N(F) RF Output
1
Not available with A1 or A3 Input Voltage options
Fault Alarm
XX - None
F1 - Contact Closure (Dry form C)
(Requires +15 to +18 VDC)
*+15 to +28 VDC with option F1
Use and Disclosure of Data

The information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, re-export or diversion
contrary to U.S. law is prohibited.
Specifications are subject to change without notice.
4 OF 4
200415 REV L
ECO 17750

Paradise Datacom RF7 Series X-Band LNA Data Sheet 200415 RevL

Uploaded by

Copyright:

Available Formats

Paradise Datacom RF7 Series X-Band LNA Data Sheet 200415 RevL

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Paradise Datacom RF7 Series X-Band LNA Data Sheet 200415 RevL

Uploaded by

Copyright:

Available Formats

RF7 Series

Teledyne Paradise Datacom LLC

Teledyne Paradise Datacom Ltd.

(See configuration matrix)

Output Power @ 1dB Gain

Measured with two tone input;

Amplifier will tolerate while

Contact factory for mechanical

width X length X height

3.38 X 10.70 X 1.93

White; epoxy enamel

@ -10 dBm output power

+12 to +28 VDC

-18 to -64 VDC

+15 to +28 VDC

100 to 240 VAC LINE

100 to 240 VAC LINE

-18 to -64 VDC RTN

100 to 240 VAC RTN.

100 to 240 VAC RTN.

-0.04 dB/C for Units with 50 dB Gain

Noise Temperature vs. Ambient Temperature

De-rate noise temperature by 0.33K/C for ambient

X-Band LNA Configuration Matrix

Noise Temperature (K)

Not available with A1 or A3 Input Voltage options

*+15 to +28 VDC with option F1

Use and Disclosure of Data

You might also like